fix irq flags in rtc-ds1511
[linux-2.6/openmoko-kernel/knife-kernel.git] / drivers / video / fsl-diu-fb.c
blobb50bb03cb5ab2da72e35d958844f573659f96b47
1 /*
2 * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
4 * Freescale DIU Frame Buffer device driver
6 * Authors: Hongjun Chen <hong-jun.chen@freescale.com>
7 * Paul Widmer <paul.widmer@freescale.com>
8 * Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
9 * York Sun <yorksun@freescale.com>
11 * Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License as published by the
15 * Free Software Foundation; either version 2 of the License, or (at your
16 * option) any later version.
20 #include <linux/module.h>
21 #include <linux/kernel.h>
22 #include <linux/errno.h>
23 #include <linux/string.h>
24 #include <linux/slab.h>
25 #include <linux/fb.h>
26 #include <linux/init.h>
27 #include <linux/dma-mapping.h>
28 #include <linux/platform_device.h>
29 #include <linux/interrupt.h>
30 #include <linux/clk.h>
31 #include <linux/uaccess.h>
32 #include <linux/vmalloc.h>
34 #include <linux/of_platform.h>
36 #include <sysdev/fsl_soc.h>
37 #include "fsl-diu-fb.h"
40 * These parameters give default parameters
41 * for video output 1024x768,
42 * FIXME - change timing to proper amounts
43 * hsync 31.5kHz, vsync 60Hz
45 static struct fb_videomode __devinitdata fsl_diu_default_mode = {
46 .refresh = 60,
47 .xres = 1024,
48 .yres = 768,
49 .pixclock = 15385,
50 .left_margin = 160,
51 .right_margin = 24,
52 .upper_margin = 29,
53 .lower_margin = 3,
54 .hsync_len = 136,
55 .vsync_len = 6,
56 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
57 .vmode = FB_VMODE_NONINTERLACED
60 static struct fb_videomode __devinitdata fsl_diu_mode_db[] = {
62 .name = "1024x768-60",
63 .refresh = 60,
64 .xres = 1024,
65 .yres = 768,
66 .pixclock = 15385,
67 .left_margin = 160,
68 .right_margin = 24,
69 .upper_margin = 29,
70 .lower_margin = 3,
71 .hsync_len = 136,
72 .vsync_len = 6,
73 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
74 .vmode = FB_VMODE_NONINTERLACED
77 .name = "1024x768-70",
78 .refresh = 70,
79 .xres = 1024,
80 .yres = 768,
81 .pixclock = 16886,
82 .left_margin = 3,
83 .right_margin = 3,
84 .upper_margin = 2,
85 .lower_margin = 2,
86 .hsync_len = 40,
87 .vsync_len = 18,
88 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
89 .vmode = FB_VMODE_NONINTERLACED
92 .name = "1024x768-75",
93 .refresh = 75,
94 .xres = 1024,
95 .yres = 768,
96 .pixclock = 15009,
97 .left_margin = 3,
98 .right_margin = 3,
99 .upper_margin = 2,
100 .lower_margin = 2,
101 .hsync_len = 80,
102 .vsync_len = 32,
103 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
104 .vmode = FB_VMODE_NONINTERLACED
107 .name = "1280x1024-60",
108 .refresh = 60,
109 .xres = 1280,
110 .yres = 1024,
111 .pixclock = 9375,
112 .left_margin = 38,
113 .right_margin = 128,
114 .upper_margin = 2,
115 .lower_margin = 7,
116 .hsync_len = 216,
117 .vsync_len = 37,
118 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
119 .vmode = FB_VMODE_NONINTERLACED
122 .name = "1280x1024-70",
123 .refresh = 70,
124 .xres = 1280,
125 .yres = 1024,
126 .pixclock = 9380,
127 .left_margin = 6,
128 .right_margin = 6,
129 .upper_margin = 4,
130 .lower_margin = 4,
131 .hsync_len = 60,
132 .vsync_len = 94,
133 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
134 .vmode = FB_VMODE_NONINTERLACED
137 .name = "1280x1024-75",
138 .refresh = 75,
139 .xres = 1280,
140 .yres = 1024,
141 .pixclock = 9380,
142 .left_margin = 6,
143 .right_margin = 6,
144 .upper_margin = 4,
145 .lower_margin = 4,
146 .hsync_len = 60,
147 .vsync_len = 15,
148 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
149 .vmode = FB_VMODE_NONINTERLACED
152 .name = "320x240", /* for AOI only */
153 .refresh = 60,
154 .xres = 320,
155 .yres = 240,
156 .pixclock = 15385,
157 .left_margin = 0,
158 .right_margin = 0,
159 .upper_margin = 0,
160 .lower_margin = 0,
161 .hsync_len = 0,
162 .vsync_len = 0,
163 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
164 .vmode = FB_VMODE_NONINTERLACED
167 .name = "1280x480-60",
168 .refresh = 60,
169 .xres = 1280,
170 .yres = 480,
171 .pixclock = 18939,
172 .left_margin = 353,
173 .right_margin = 47,
174 .upper_margin = 39,
175 .lower_margin = 4,
176 .hsync_len = 8,
177 .vsync_len = 2,
178 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
179 .vmode = FB_VMODE_NONINTERLACED
183 static char *fb_mode = "1024x768-32@60";
184 static unsigned long default_bpp = 32;
185 static int monitor_port;
187 #if defined(CONFIG_NOT_COHERENT_CACHE)
188 static u8 *coherence_data;
189 static size_t coherence_data_size;
190 static unsigned int d_cache_line_size;
191 #endif
193 static DEFINE_SPINLOCK(diu_lock);
195 struct fsl_diu_data {
196 struct fb_info *fsl_diu_info[FSL_AOI_NUM - 1];
197 /*FSL_AOI_NUM has one dummy AOI */
198 struct device_attribute dev_attr;
199 struct diu_ad *dummy_ad;
200 void *dummy_aoi_virt;
201 unsigned int irq;
202 int fb_enabled;
203 int monitor_port;
206 struct mfb_info {
207 int index;
208 int type;
209 char *id;
210 int registered;
211 int blank;
212 unsigned long pseudo_palette[16];
213 struct diu_ad *ad;
214 int cursor_reset;
215 unsigned char g_alpha;
216 unsigned int count;
217 int x_aoi_d; /* aoi display x offset to physical screen */
218 int y_aoi_d; /* aoi display y offset to physical screen */
219 struct fsl_diu_data *parent;
223 static struct mfb_info mfb_template[] = {
224 { /* AOI 0 for plane 0 */
225 .index = 0,
226 .type = MFB_TYPE_OUTPUT,
227 .id = "Panel0",
228 .registered = 0,
229 .count = 0,
230 .x_aoi_d = 0,
231 .y_aoi_d = 0,
233 { /* AOI 0 for plane 1 */
234 .index = 1,
235 .type = MFB_TYPE_OUTPUT,
236 .id = "Panel1 AOI0",
237 .registered = 0,
238 .g_alpha = 0xff,
239 .count = 0,
240 .x_aoi_d = 0,
241 .y_aoi_d = 0,
243 { /* AOI 1 for plane 1 */
244 .index = 2,
245 .type = MFB_TYPE_OUTPUT,
246 .id = "Panel1 AOI1",
247 .registered = 0,
248 .g_alpha = 0xff,
249 .count = 0,
250 .x_aoi_d = 0,
251 .y_aoi_d = 480,
253 { /* AOI 0 for plane 2 */
254 .index = 3,
255 .type = MFB_TYPE_OUTPUT,
256 .id = "Panel2 AOI0",
257 .registered = 0,
258 .g_alpha = 0xff,
259 .count = 0,
260 .x_aoi_d = 640,
261 .y_aoi_d = 0,
263 { /* AOI 1 for plane 2 */
264 .index = 4,
265 .type = MFB_TYPE_OUTPUT,
266 .id = "Panel2 AOI1",
267 .registered = 0,
268 .g_alpha = 0xff,
269 .count = 0,
270 .x_aoi_d = 640,
271 .y_aoi_d = 480,
275 static struct diu_hw dr = {
276 .mode = MFB_MODE1,
277 .reg_lock = __SPIN_LOCK_UNLOCKED(diu_hw.reg_lock),
280 static struct diu_pool pool;
282 /* To allocate memory for framebuffer. First try __get_free_pages(). If it
283 * fails, try rh_alloc. The reason is __get_free_pages() cannot allocate
284 * very large memory (more than 4MB). We don't want to allocate all memory
285 * in rheap since small memory allocation/deallocation will fragment the
286 * rheap and make the furture large allocation fail.
289 void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys)
291 void *virt;
293 pr_debug("size=%lu\n", size);
295 virt = (void *)__get_free_pages(GFP_DMA | __GFP_ZERO, get_order(size));
296 if (virt) {
297 *phys = virt_to_phys(virt);
298 pr_debug("virt %p, phys=%llx\n", virt, (uint64_t) *phys);
299 return virt;
301 if (!diu_ops.diu_mem) {
302 printk(KERN_INFO "%s: no diu_mem."
303 " To reserve more memory, put 'diufb=15M' "
304 "in the command line\n", __func__);
305 return NULL;
308 virt = (void *)rh_alloc(&diu_ops.diu_rh_info, size, "DIU");
309 if (virt) {
310 *phys = virt_to_bus(virt);
311 memset(virt, 0, size);
314 pr_debug("rh virt=%p phys=%lx\n", virt, *phys);
316 return virt;
319 void fsl_diu_free(void *p, unsigned long size)
321 pr_debug("p=%p size=%lu\n", p, size);
323 if (!p)
324 return;
326 if ((p >= diu_ops.diu_mem) &&
327 (p < (diu_ops.diu_mem + diu_ops.diu_size))) {
328 pr_debug("rh\n");
329 rh_free(&diu_ops.diu_rh_info, (unsigned long) p);
330 } else {
331 pr_debug("dma\n");
332 free_pages((unsigned long)p, get_order(size));
336 static int fsl_diu_enable_panel(struct fb_info *info)
338 struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
339 struct diu *hw = dr.diu_reg;
340 struct diu_ad *ad = mfbi->ad;
341 struct fsl_diu_data *machine_data = mfbi->parent;
342 int res = 0;
344 pr_debug("enable_panel index %d\n", mfbi->index);
345 if (mfbi->type != MFB_TYPE_OFF) {
346 switch (mfbi->index) {
347 case 0: /* plane 0 */
348 if (hw->desc[0] != ad->paddr)
349 out_be32(&hw->desc[0], ad->paddr);
350 break;
351 case 1: /* plane 1 AOI 0 */
352 cmfbi = machine_data->fsl_diu_info[2]->par;
353 if (hw->desc[1] != ad->paddr) { /* AOI0 closed */
354 if (cmfbi->count > 0) /* AOI1 open */
355 ad->next_ad =
356 cpu_to_le32(cmfbi->ad->paddr);
357 else
358 ad->next_ad = 0;
359 out_be32(&hw->desc[1], ad->paddr);
361 break;
362 case 3: /* plane 2 AOI 0 */
363 cmfbi = machine_data->fsl_diu_info[4]->par;
364 if (hw->desc[2] != ad->paddr) { /* AOI0 closed */
365 if (cmfbi->count > 0) /* AOI1 open */
366 ad->next_ad =
367 cpu_to_le32(cmfbi->ad->paddr);
368 else
369 ad->next_ad = 0;
370 out_be32(&hw->desc[2], ad->paddr);
372 break;
373 case 2: /* plane 1 AOI 1 */
374 pmfbi = machine_data->fsl_diu_info[1]->par;
375 ad->next_ad = 0;
376 if (hw->desc[1] == machine_data->dummy_ad->paddr)
377 out_be32(&hw->desc[1], ad->paddr);
378 else /* AOI0 open */
379 pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
380 break;
381 case 4: /* plane 2 AOI 1 */
382 pmfbi = machine_data->fsl_diu_info[3]->par;
383 ad->next_ad = 0;
384 if (hw->desc[2] == machine_data->dummy_ad->paddr)
385 out_be32(&hw->desc[2], ad->paddr);
386 else /* AOI0 was open */
387 pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
388 break;
389 default:
390 res = -EINVAL;
391 break;
393 } else
394 res = -EINVAL;
395 return res;
398 static int fsl_diu_disable_panel(struct fb_info *info)
400 struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
401 struct diu *hw = dr.diu_reg;
402 struct diu_ad *ad = mfbi->ad;
403 struct fsl_diu_data *machine_data = mfbi->parent;
404 int res = 0;
406 switch (mfbi->index) {
407 case 0: /* plane 0 */
408 if (hw->desc[0] != machine_data->dummy_ad->paddr)
409 out_be32(&hw->desc[0],
410 machine_data->dummy_ad->paddr);
411 break;
412 case 1: /* plane 1 AOI 0 */
413 cmfbi = machine_data->fsl_diu_info[2]->par;
414 if (cmfbi->count > 0) /* AOI1 is open */
415 out_be32(&hw->desc[1], cmfbi->ad->paddr);
416 /* move AOI1 to the first */
417 else /* AOI1 was closed */
418 out_be32(&hw->desc[1],
419 machine_data->dummy_ad->paddr);
420 /* close AOI 0 */
421 break;
422 case 3: /* plane 2 AOI 0 */
423 cmfbi = machine_data->fsl_diu_info[4]->par;
424 if (cmfbi->count > 0) /* AOI1 is open */
425 out_be32(&hw->desc[2], cmfbi->ad->paddr);
426 /* move AOI1 to the first */
427 else /* AOI1 was closed */
428 out_be32(&hw->desc[2],
429 machine_data->dummy_ad->paddr);
430 /* close AOI 0 */
431 break;
432 case 2: /* plane 1 AOI 1 */
433 pmfbi = machine_data->fsl_diu_info[1]->par;
434 if (hw->desc[1] != ad->paddr) {
435 /* AOI1 is not the first in the chain */
436 if (pmfbi->count > 0)
437 /* AOI0 is open, must be the first */
438 pmfbi->ad->next_ad = 0;
439 } else /* AOI1 is the first in the chain */
440 out_be32(&hw->desc[1], machine_data->dummy_ad->paddr);
441 /* close AOI 1 */
442 break;
443 case 4: /* plane 2 AOI 1 */
444 pmfbi = machine_data->fsl_diu_info[3]->par;
445 if (hw->desc[2] != ad->paddr) {
446 /* AOI1 is not the first in the chain */
447 if (pmfbi->count > 0)
448 /* AOI0 is open, must be the first */
449 pmfbi->ad->next_ad = 0;
450 } else /* AOI1 is the first in the chain */
451 out_be32(&hw->desc[2], machine_data->dummy_ad->paddr);
452 /* close AOI 1 */
453 break;
454 default:
455 res = -EINVAL;
456 break;
459 return res;
462 static void enable_lcdc(struct fb_info *info)
464 struct diu *hw = dr.diu_reg;
465 struct mfb_info *mfbi = info->par;
466 struct fsl_diu_data *machine_data = mfbi->parent;
468 if (!machine_data->fb_enabled) {
469 out_be32(&hw->diu_mode, dr.mode);
470 machine_data->fb_enabled++;
474 static void disable_lcdc(struct fb_info *info)
476 struct diu *hw = dr.diu_reg;
477 struct mfb_info *mfbi = info->par;
478 struct fsl_diu_data *machine_data = mfbi->parent;
480 if (machine_data->fb_enabled) {
481 out_be32(&hw->diu_mode, 0);
482 machine_data->fb_enabled = 0;
486 static void adjust_aoi_size_position(struct fb_var_screeninfo *var,
487 struct fb_info *info)
489 struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par;
490 struct fsl_diu_data *machine_data = mfbi->parent;
491 int available_height, upper_aoi_bottom, index = mfbi->index;
492 int lower_aoi_is_open, upper_aoi_is_open;
493 __u32 base_plane_width, base_plane_height, upper_aoi_height;
495 base_plane_width = machine_data->fsl_diu_info[0]->var.xres;
496 base_plane_height = machine_data->fsl_diu_info[0]->var.yres;
498 switch (index) {
499 case 0:
500 if (mfbi->x_aoi_d != 0)
501 mfbi->x_aoi_d = 0;
502 if (mfbi->y_aoi_d != 0)
503 mfbi->y_aoi_d = 0;
504 break;
505 case 1: /* AOI 0 */
506 case 3:
507 lower_aoi_mfbi = machine_data->fsl_diu_info[index+1]->par;
508 lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0;
509 if (var->xres > base_plane_width)
510 var->xres = base_plane_width;
511 if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
512 mfbi->x_aoi_d = base_plane_width - var->xres;
514 if (lower_aoi_is_open)
515 available_height = lower_aoi_mfbi->y_aoi_d;
516 else
517 available_height = base_plane_height;
518 if (var->yres > available_height)
519 var->yres = available_height;
520 if ((mfbi->y_aoi_d + var->yres) > available_height)
521 mfbi->y_aoi_d = available_height - var->yres;
522 break;
523 case 2: /* AOI 1 */
524 case 4:
525 upper_aoi_mfbi = machine_data->fsl_diu_info[index-1]->par;
526 upper_aoi_height =
527 machine_data->fsl_diu_info[index-1]->var.yres;
528 upper_aoi_bottom = upper_aoi_mfbi->y_aoi_d + upper_aoi_height;
529 upper_aoi_is_open = upper_aoi_mfbi->count > 0 ? 1 : 0;
530 if (var->xres > base_plane_width)
531 var->xres = base_plane_width;
532 if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
533 mfbi->x_aoi_d = base_plane_width - var->xres;
534 if (mfbi->y_aoi_d < 0)
535 mfbi->y_aoi_d = 0;
536 if (upper_aoi_is_open) {
537 if (mfbi->y_aoi_d < upper_aoi_bottom)
538 mfbi->y_aoi_d = upper_aoi_bottom;
539 available_height = base_plane_height
540 - upper_aoi_bottom;
541 } else
542 available_height = base_plane_height;
543 if (var->yres > available_height)
544 var->yres = available_height;
545 if ((mfbi->y_aoi_d + var->yres) > base_plane_height)
546 mfbi->y_aoi_d = base_plane_height - var->yres;
547 break;
551 * Checks to see if the hardware supports the state requested by var passed
552 * in. This function does not alter the hardware state! If the var passed in
553 * is slightly off by what the hardware can support then we alter the var
554 * PASSED in to what we can do. If the hardware doesn't support mode change
555 * a -EINVAL will be returned by the upper layers.
557 static int fsl_diu_check_var(struct fb_var_screeninfo *var,
558 struct fb_info *info)
560 unsigned long htotal, vtotal;
562 pr_debug("check_var xres: %d\n", var->xres);
563 pr_debug("check_var yres: %d\n", var->yres);
565 if (var->xres_virtual < var->xres)
566 var->xres_virtual = var->xres;
567 if (var->yres_virtual < var->yres)
568 var->yres_virtual = var->yres;
570 if (var->xoffset < 0)
571 var->xoffset = 0;
573 if (var->yoffset < 0)
574 var->yoffset = 0;
576 if (var->xoffset + info->var.xres > info->var.xres_virtual)
577 var->xoffset = info->var.xres_virtual - info->var.xres;
579 if (var->yoffset + info->var.yres > info->var.yres_virtual)
580 var->yoffset = info->var.yres_virtual - info->var.yres;
582 if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
583 (var->bits_per_pixel != 16))
584 var->bits_per_pixel = default_bpp;
586 switch (var->bits_per_pixel) {
587 case 16:
588 var->red.length = 5;
589 var->red.offset = 11;
590 var->red.msb_right = 0;
592 var->green.length = 6;
593 var->green.offset = 5;
594 var->green.msb_right = 0;
596 var->blue.length = 5;
597 var->blue.offset = 0;
598 var->blue.msb_right = 0;
600 var->transp.length = 0;
601 var->transp.offset = 0;
602 var->transp.msb_right = 0;
603 break;
604 case 24:
605 var->red.length = 8;
606 var->red.offset = 0;
607 var->red.msb_right = 0;
609 var->green.length = 8;
610 var->green.offset = 8;
611 var->green.msb_right = 0;
613 var->blue.length = 8;
614 var->blue.offset = 16;
615 var->blue.msb_right = 0;
617 var->transp.length = 0;
618 var->transp.offset = 0;
619 var->transp.msb_right = 0;
620 break;
621 case 32:
622 var->red.length = 8;
623 var->red.offset = 16;
624 var->red.msb_right = 0;
626 var->green.length = 8;
627 var->green.offset = 8;
628 var->green.msb_right = 0;
630 var->blue.length = 8;
631 var->blue.offset = 0;
632 var->blue.msb_right = 0;
634 var->transp.length = 8;
635 var->transp.offset = 24;
636 var->transp.msb_right = 0;
638 break;
640 /* If the pixclock is below the minimum spec'd value then set to
641 * refresh rate for 60Hz since this is supported by most monitors.
642 * Refer to Documentation/fb/ for calculations.
644 if ((var->pixclock < MIN_PIX_CLK) || (var->pixclock > MAX_PIX_CLK)) {
645 htotal = var->xres + var->right_margin + var->hsync_len +
646 var->left_margin;
647 vtotal = var->yres + var->lower_margin + var->vsync_len +
648 var->upper_margin;
649 var->pixclock = (vtotal * htotal * 6UL) / 100UL;
650 var->pixclock = KHZ2PICOS(var->pixclock);
651 pr_debug("pixclock set for 60Hz refresh = %u ps\n",
652 var->pixclock);
655 var->height = -1;
656 var->width = -1;
657 var->grayscale = 0;
659 /* Copy nonstd field to/from sync for fbset usage */
660 var->sync |= var->nonstd;
661 var->nonstd |= var->sync;
663 adjust_aoi_size_position(var, info);
664 return 0;
667 static void set_fix(struct fb_info *info)
669 struct fb_fix_screeninfo *fix = &info->fix;
670 struct fb_var_screeninfo *var = &info->var;
671 struct mfb_info *mfbi = info->par;
673 strncpy(fix->id, mfbi->id, strlen(mfbi->id));
674 fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
675 fix->type = FB_TYPE_PACKED_PIXELS;
676 fix->accel = FB_ACCEL_NONE;
677 fix->visual = FB_VISUAL_TRUECOLOR;
678 fix->xpanstep = 1;
679 fix->ypanstep = 1;
682 static void update_lcdc(struct fb_info *info)
684 struct fb_var_screeninfo *var = &info->var;
685 struct mfb_info *mfbi = info->par;
686 struct fsl_diu_data *machine_data = mfbi->parent;
687 struct diu *hw;
688 int i, j;
689 char __iomem *cursor_base, *gamma_table_base;
691 u32 temp;
693 hw = dr.diu_reg;
695 if (mfbi->type == MFB_TYPE_OFF) {
696 fsl_diu_disable_panel(info);
697 return;
700 diu_ops.set_monitor_port(machine_data->monitor_port);
701 gamma_table_base = pool.gamma.vaddr;
702 cursor_base = pool.cursor.vaddr;
703 /* Prep for DIU init - gamma table, cursor table */
705 for (i = 0; i <= 2; i++)
706 for (j = 0; j <= 255; j++)
707 *gamma_table_base++ = j;
709 diu_ops.set_gamma_table(machine_data->monitor_port, pool.gamma.vaddr);
711 pr_debug("update-lcdc: HW - %p\n Disabling DIU\n", hw);
712 disable_lcdc(info);
714 /* Program DIU registers */
716 out_be32(&hw->gamma, pool.gamma.paddr);
717 out_be32(&hw->cursor, pool.cursor.paddr);
719 out_be32(&hw->bgnd, 0x007F7F7F); /* BGND */
720 out_be32(&hw->bgnd_wb, 0); /* BGND_WB */
721 out_be32(&hw->disp_size, (var->yres << 16 | var->xres));
722 /* DISP SIZE */
723 pr_debug("DIU xres: %d\n", var->xres);
724 pr_debug("DIU yres: %d\n", var->yres);
726 out_be32(&hw->wb_size, 0); /* WB SIZE */
727 out_be32(&hw->wb_mem_addr, 0); /* WB MEM ADDR */
729 /* Horizontal and vertical configuration register */
730 temp = var->left_margin << 22 | /* BP_H */
731 var->hsync_len << 11 | /* PW_H */
732 var->right_margin; /* FP_H */
734 out_be32(&hw->hsyn_para, temp);
736 temp = var->upper_margin << 22 | /* BP_V */
737 var->vsync_len << 11 | /* PW_V */
738 var->lower_margin; /* FP_V */
740 out_be32(&hw->vsyn_para, temp);
742 pr_debug("DIU right_margin - %d\n", var->right_margin);
743 pr_debug("DIU left_margin - %d\n", var->left_margin);
744 pr_debug("DIU hsync_len - %d\n", var->hsync_len);
745 pr_debug("DIU upper_margin - %d\n", var->upper_margin);
746 pr_debug("DIU lower_margin - %d\n", var->lower_margin);
747 pr_debug("DIU vsync_len - %d\n", var->vsync_len);
748 pr_debug("DIU HSYNC - 0x%08x\n", hw->hsyn_para);
749 pr_debug("DIU VSYNC - 0x%08x\n", hw->vsyn_para);
751 diu_ops.set_pixel_clock(var->pixclock);
753 out_be32(&hw->syn_pol, 0); /* SYNC SIGNALS POLARITY */
754 out_be32(&hw->thresholds, 0x00037800); /* The Thresholds */
755 out_be32(&hw->int_status, 0); /* INTERRUPT STATUS */
756 out_be32(&hw->plut, 0x01F5F666);
758 /* Enable the DIU */
759 enable_lcdc(info);
762 static int map_video_memory(struct fb_info *info)
764 phys_addr_t phys;
766 pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual);
767 pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
768 pr_debug("info->fix.line_length = %d\n", info->fix.line_length);
770 info->fix.smem_len = info->fix.line_length * info->var.yres_virtual;
771 pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len);
772 info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys);
773 if (info->screen_base == 0) {
774 printk(KERN_ERR "Unable to allocate fb memory\n");
775 return -ENOMEM;
777 info->fix.smem_start = (unsigned long) phys;
778 info->screen_size = info->fix.smem_len;
780 pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n",
781 info->fix.smem_start,
782 info->fix.smem_len);
783 pr_debug("screen base %p\n", info->screen_base);
785 return 0;
788 static void unmap_video_memory(struct fb_info *info)
790 fsl_diu_free(info->screen_base, info->fix.smem_len);
791 info->screen_base = 0;
792 info->fix.smem_start = 0;
793 info->fix.smem_len = 0;
797 * Using the fb_var_screeninfo in fb_info we set the resolution of this
798 * particular framebuffer. This function alters the fb_fix_screeninfo stored
799 * in fb_info. It does not alter var in fb_info since we are using that
800 * data. This means we depend on the data in var inside fb_info to be
801 * supported by the hardware. fsl_diu_check_var is always called before
802 * fsl_diu_set_par to ensure this.
804 static int fsl_diu_set_par(struct fb_info *info)
806 unsigned long len;
807 struct fb_var_screeninfo *var = &info->var;
808 struct mfb_info *mfbi = info->par;
809 struct fsl_diu_data *machine_data = mfbi->parent;
810 struct diu_ad *ad = mfbi->ad;
811 struct diu *hw;
813 hw = dr.diu_reg;
815 set_fix(info);
816 mfbi->cursor_reset = 1;
818 len = info->var.yres_virtual * info->fix.line_length;
819 /* Alloc & dealloc each time resolution/bpp change */
820 if (len != info->fix.smem_len) {
821 if (info->fix.smem_start)
822 unmap_video_memory(info);
823 pr_debug("SET PAR: smem_len = %d\n", info->fix.smem_len);
825 /* Memory allocation for framebuffer */
826 if (map_video_memory(info)) {
827 printk(KERN_ERR "Unable to allocate fb memory 1\n");
828 return -ENOMEM;
832 ad->pix_fmt =
833 diu_ops.get_pixel_format(var->bits_per_pixel,
834 machine_data->monitor_port);
835 ad->addr = cpu_to_le32(info->fix.smem_start);
836 ad->src_size_g_alpha = cpu_to_le32((var->yres << 12) |
837 var->xres) | mfbi->g_alpha;
838 /* fix me. AOI should not be greater than display size */
839 ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres);
840 ad->offset_xyi = 0;
841 ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
843 /* Disable chroma keying function */
844 ad->ckmax_r = 0;
845 ad->ckmax_g = 0;
846 ad->ckmax_b = 0;
848 ad->ckmin_r = 255;
849 ad->ckmin_g = 255;
850 ad->ckmin_b = 255;
852 if (mfbi->index == 0)
853 update_lcdc(info);
854 return 0;
857 static inline __u32 CNVT_TOHW(__u32 val, __u32 width)
859 return ((val<<width) + 0x7FFF - val)>>16;
863 * Set a single color register. The values supplied have a 16 bit magnitude
864 * which needs to be scaled in this function for the hardware. Things to take
865 * into consideration are how many color registers, if any, are supported with
866 * the current color visual. With truecolor mode no color palettes are
867 * supported. Here a psuedo palette is created which we store the value in
868 * pseudo_palette in struct fb_info. For pseudocolor mode we have a limited
869 * color palette.
871 static int fsl_diu_setcolreg(unsigned regno, unsigned red, unsigned green,
872 unsigned blue, unsigned transp, struct fb_info *info)
874 int ret = 1;
877 * If greyscale is true, then we convert the RGB value
878 * to greyscale no matter what visual we are using.
880 if (info->var.grayscale)
881 red = green = blue = (19595 * red + 38470 * green +
882 7471 * blue) >> 16;
883 switch (info->fix.visual) {
884 case FB_VISUAL_TRUECOLOR:
886 * 16-bit True Colour. We encode the RGB value
887 * according to the RGB bitfield information.
889 if (regno < 16) {
890 u32 *pal = info->pseudo_palette;
891 u32 v;
893 red = CNVT_TOHW(red, info->var.red.length);
894 green = CNVT_TOHW(green, info->var.green.length);
895 blue = CNVT_TOHW(blue, info->var.blue.length);
896 transp = CNVT_TOHW(transp, info->var.transp.length);
898 v = (red << info->var.red.offset) |
899 (green << info->var.green.offset) |
900 (blue << info->var.blue.offset) |
901 (transp << info->var.transp.offset);
903 pal[regno] = v;
904 ret = 0;
906 break;
907 case FB_VISUAL_STATIC_PSEUDOCOLOR:
908 case FB_VISUAL_PSEUDOCOLOR:
909 break;
912 return ret;
916 * Pan (or wrap, depending on the `vmode' field) the display using the
917 * 'xoffset' and 'yoffset' fields of the 'var' structure. If the values
918 * don't fit, return -EINVAL.
920 static int fsl_diu_pan_display(struct fb_var_screeninfo *var,
921 struct fb_info *info)
923 if ((info->var.xoffset == var->xoffset) &&
924 (info->var.yoffset == var->yoffset))
925 return 0; /* No change, do nothing */
927 if (var->xoffset < 0 || var->yoffset < 0
928 || var->xoffset + info->var.xres > info->var.xres_virtual
929 || var->yoffset + info->var.yres > info->var.yres_virtual)
930 return -EINVAL;
932 info->var.xoffset = var->xoffset;
933 info->var.yoffset = var->yoffset;
935 if (var->vmode & FB_VMODE_YWRAP)
936 info->var.vmode |= FB_VMODE_YWRAP;
937 else
938 info->var.vmode &= ~FB_VMODE_YWRAP;
940 return 0;
944 * Blank the screen if blank_mode != 0, else unblank. Return 0 if blanking
945 * succeeded, != 0 if un-/blanking failed.
946 * blank_mode == 2: suspend vsync
947 * blank_mode == 3: suspend hsync
948 * blank_mode == 4: powerdown
950 static int fsl_diu_blank(int blank_mode, struct fb_info *info)
952 struct mfb_info *mfbi = info->par;
954 mfbi->blank = blank_mode;
956 switch (blank_mode) {
957 case FB_BLANK_VSYNC_SUSPEND:
958 case FB_BLANK_HSYNC_SUSPEND:
959 /* FIXME: fixes to enable_panel and enable lcdc needed */
960 case FB_BLANK_NORMAL:
961 /* fsl_diu_disable_panel(info);*/
962 break;
963 case FB_BLANK_POWERDOWN:
964 /* disable_lcdc(info); */
965 break;
966 case FB_BLANK_UNBLANK:
967 /* fsl_diu_enable_panel(info);*/
968 break;
971 return 0;
974 static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
975 unsigned long arg)
977 struct mfb_info *mfbi = info->par;
978 struct diu_ad *ad = mfbi->ad;
979 struct mfb_chroma_key ck;
980 unsigned char global_alpha;
981 struct aoi_display_offset aoi_d;
982 __u32 pix_fmt;
983 void __user *buf = (void __user *)arg;
985 if (!arg)
986 return -EINVAL;
987 switch (cmd) {
988 case MFB_SET_PIXFMT:
989 if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt)))
990 return -EFAULT;
991 ad->pix_fmt = pix_fmt;
992 pr_debug("Set pixel format to 0x%08x\n", ad->pix_fmt);
993 break;
994 case MFB_GET_PIXFMT:
995 pix_fmt = ad->pix_fmt;
996 if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt)))
997 return -EFAULT;
998 pr_debug("get pixel format 0x%08x\n", ad->pix_fmt);
999 break;
1000 case MFB_SET_AOID:
1001 if (copy_from_user(&aoi_d, buf, sizeof(aoi_d)))
1002 return -EFAULT;
1003 mfbi->x_aoi_d = aoi_d.x_aoi_d;
1004 mfbi->y_aoi_d = aoi_d.y_aoi_d;
1005 pr_debug("set AOI display offset of index %d to (%d,%d)\n",
1006 mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
1007 fsl_diu_check_var(&info->var, info);
1008 fsl_diu_set_par(info);
1009 break;
1010 case MFB_GET_AOID:
1011 aoi_d.x_aoi_d = mfbi->x_aoi_d;
1012 aoi_d.y_aoi_d = mfbi->y_aoi_d;
1013 if (copy_to_user(buf, &aoi_d, sizeof(aoi_d)))
1014 return -EFAULT;
1015 pr_debug("get AOI display offset of index %d (%d,%d)\n",
1016 mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
1017 break;
1018 case MFB_GET_ALPHA:
1019 global_alpha = mfbi->g_alpha;
1020 if (copy_to_user(buf, &global_alpha, sizeof(global_alpha)))
1021 return -EFAULT;
1022 pr_debug("get global alpha of index %d\n", mfbi->index);
1023 break;
1024 case MFB_SET_ALPHA:
1025 /* set panel information */
1026 if (copy_from_user(&global_alpha, buf, sizeof(global_alpha)))
1027 return -EFAULT;
1028 ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) |
1029 (global_alpha & 0xff);
1030 mfbi->g_alpha = global_alpha;
1031 pr_debug("set global alpha for index %d\n", mfbi->index);
1032 break;
1033 case MFB_SET_CHROMA_KEY:
1034 /* set panel winformation */
1035 if (copy_from_user(&ck, buf, sizeof(ck)))
1036 return -EFAULT;
1038 if (ck.enable &&
1039 (ck.red_max < ck.red_min ||
1040 ck.green_max < ck.green_min ||
1041 ck.blue_max < ck.blue_min))
1042 return -EINVAL;
1044 if (!ck.enable) {
1045 ad->ckmax_r = 0;
1046 ad->ckmax_g = 0;
1047 ad->ckmax_b = 0;
1048 ad->ckmin_r = 255;
1049 ad->ckmin_g = 255;
1050 ad->ckmin_b = 255;
1051 } else {
1052 ad->ckmax_r = ck.red_max;
1053 ad->ckmax_g = ck.green_max;
1054 ad->ckmax_b = ck.blue_max;
1055 ad->ckmin_r = ck.red_min;
1056 ad->ckmin_g = ck.green_min;
1057 ad->ckmin_b = ck.blue_min;
1059 pr_debug("set chroma key\n");
1060 break;
1061 case FBIOGET_GWINFO:
1062 if (mfbi->type == MFB_TYPE_OFF)
1063 return -ENODEV;
1064 /* get graphic window information */
1065 if (copy_to_user(buf, ad, sizeof(*ad)))
1066 return -EFAULT;
1067 break;
1068 case FBIOGET_HWCINFO:
1069 pr_debug("FBIOGET_HWCINFO:0x%08x\n", FBIOGET_HWCINFO);
1070 break;
1071 case FBIOPUT_MODEINFO:
1072 pr_debug("FBIOPUT_MODEINFO:0x%08x\n", FBIOPUT_MODEINFO);
1073 break;
1074 case FBIOGET_DISPINFO:
1075 pr_debug("FBIOGET_DISPINFO:0x%08x\n", FBIOGET_DISPINFO);
1076 break;
1078 default:
1079 printk(KERN_ERR "Unknown ioctl command (0x%08X)\n", cmd);
1080 return -ENOIOCTLCMD;
1083 return 0;
1086 /* turn on fb if count == 1
1088 static int fsl_diu_open(struct fb_info *info, int user)
1090 struct mfb_info *mfbi = info->par;
1091 int res = 0;
1093 spin_lock(&diu_lock);
1094 mfbi->count++;
1095 if (mfbi->count == 1) {
1096 pr_debug("open plane index %d\n", mfbi->index);
1097 fsl_diu_check_var(&info->var, info);
1098 res = fsl_diu_set_par(info);
1099 if (res < 0)
1100 mfbi->count--;
1101 else {
1102 res = fsl_diu_enable_panel(info);
1103 if (res < 0)
1104 mfbi->count--;
1108 spin_unlock(&diu_lock);
1109 return res;
1112 /* turn off fb if count == 0
1114 static int fsl_diu_release(struct fb_info *info, int user)
1116 struct mfb_info *mfbi = info->par;
1117 int res = 0;
1119 spin_lock(&diu_lock);
1120 mfbi->count--;
1121 if (mfbi->count == 0) {
1122 pr_debug("release plane index %d\n", mfbi->index);
1123 res = fsl_diu_disable_panel(info);
1124 if (res < 0)
1125 mfbi->count++;
1127 spin_unlock(&diu_lock);
1128 return res;
1131 static struct fb_ops fsl_diu_ops = {
1132 .owner = THIS_MODULE,
1133 .fb_check_var = fsl_diu_check_var,
1134 .fb_set_par = fsl_diu_set_par,
1135 .fb_setcolreg = fsl_diu_setcolreg,
1136 .fb_blank = fsl_diu_blank,
1137 .fb_pan_display = fsl_diu_pan_display,
1138 .fb_fillrect = cfb_fillrect,
1139 .fb_copyarea = cfb_copyarea,
1140 .fb_imageblit = cfb_imageblit,
1141 .fb_ioctl = fsl_diu_ioctl,
1142 .fb_open = fsl_diu_open,
1143 .fb_release = fsl_diu_release,
1146 static int init_fbinfo(struct fb_info *info)
1148 struct mfb_info *mfbi = info->par;
1150 info->device = NULL;
1151 info->var.activate = FB_ACTIVATE_NOW;
1152 info->fbops = &fsl_diu_ops;
1153 info->flags = FBINFO_FLAG_DEFAULT;
1154 info->pseudo_palette = &mfbi->pseudo_palette;
1156 /* Allocate colormap */
1157 fb_alloc_cmap(&info->cmap, 16, 0);
1158 return 0;
1161 static int install_fb(struct fb_info *info)
1163 int rc;
1164 struct mfb_info *mfbi = info->par;
1165 const char *aoi_mode, *init_aoi_mode = "320x240";
1167 if (init_fbinfo(info))
1168 return -EINVAL;
1170 if (mfbi->index == 0) /* plane 0 */
1171 aoi_mode = fb_mode;
1172 else
1173 aoi_mode = init_aoi_mode;
1174 pr_debug("mode used = %s\n", aoi_mode);
1175 rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
1176 ARRAY_SIZE(fsl_diu_mode_db), &fsl_diu_default_mode, default_bpp);
1178 switch (rc) {
1179 case 1:
1180 pr_debug("using mode specified in @mode\n");
1181 break;
1182 case 2:
1183 pr_debug("using mode specified in @mode "
1184 "with ignored refresh rate\n");
1185 break;
1186 case 3:
1187 pr_debug("using mode default mode\n");
1188 break;
1189 case 4:
1190 pr_debug("using mode from list\n");
1191 break;
1192 default:
1193 pr_debug("rc = %d\n", rc);
1194 pr_debug("failed to find mode\n");
1195 return -EINVAL;
1196 break;
1199 pr_debug("xres_virtual %d\n", info->var.xres_virtual);
1200 pr_debug("bits_per_pixel %d\n", info->var.bits_per_pixel);
1202 pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
1203 pr_debug("info->fix.line_length = %d\n", info->fix.line_length);
1205 if (mfbi->type == MFB_TYPE_OFF)
1206 mfbi->blank = FB_BLANK_NORMAL;
1207 else
1208 mfbi->blank = FB_BLANK_UNBLANK;
1210 if (fsl_diu_check_var(&info->var, info)) {
1211 printk(KERN_ERR "fb_check_var failed");
1212 fb_dealloc_cmap(&info->cmap);
1213 return -EINVAL;
1216 if (fsl_diu_set_par(info)) {
1217 printk(KERN_ERR "fb_set_par failed");
1218 fb_dealloc_cmap(&info->cmap);
1219 return -EINVAL;
1222 if (register_framebuffer(info) < 0) {
1223 printk(KERN_ERR "register_framebuffer failed");
1224 unmap_video_memory(info);
1225 fb_dealloc_cmap(&info->cmap);
1226 return -EINVAL;
1229 mfbi->registered = 1;
1230 printk(KERN_INFO "fb%d: %s fb device registered successfully.\n",
1231 info->node, info->fix.id);
1233 return 0;
1236 static void __exit uninstall_fb(struct fb_info *info)
1238 struct mfb_info *mfbi = info->par;
1240 if (!mfbi->registered)
1241 return;
1243 unregister_framebuffer(info);
1244 unmap_video_memory(info);
1245 if (&info->cmap)
1246 fb_dealloc_cmap(&info->cmap);
1248 mfbi->registered = 0;
1251 static irqreturn_t fsl_diu_isr(int irq, void *dev_id)
1253 struct diu *hw = dr.diu_reg;
1254 unsigned int status = in_be32(&hw->int_status);
1256 if (status) {
1257 /* This is the workaround for underrun */
1258 if (status & INT_UNDRUN) {
1259 out_be32(&hw->diu_mode, 0);
1260 pr_debug("Err: DIU occurs underrun!\n");
1261 udelay(1);
1262 out_be32(&hw->diu_mode, 1);
1264 #if defined(CONFIG_NOT_COHERENT_CACHE)
1265 else if (status & INT_VSYNC) {
1266 unsigned int i;
1267 for (i = 0; i < coherence_data_size;
1268 i += d_cache_line_size)
1269 __asm__ __volatile__ (
1270 "dcbz 0, %[input]"
1271 ::[input]"r"(&coherence_data[i]));
1273 #endif
1274 return IRQ_HANDLED;
1276 return IRQ_NONE;
1279 static int request_irq_local(int irq)
1281 unsigned long status, ints;
1282 struct diu *hw;
1283 int ret;
1285 hw = dr.diu_reg;
1287 /* Read to clear the status */
1288 status = in_be32(&hw->int_status);
1290 ret = request_irq(irq, fsl_diu_isr, 0, "diu", 0);
1291 if (ret)
1292 pr_info("Request diu IRQ failed.\n");
1293 else {
1294 ints = INT_PARERR | INT_LS_BF_VS;
1295 #if !defined(CONFIG_NOT_COHERENT_CACHE)
1296 ints |= INT_VSYNC;
1297 #endif
1298 if (dr.mode == MFB_MODE2 || dr.mode == MFB_MODE3)
1299 ints |= INT_VSYNC_WB;
1301 /* Read to clear the status */
1302 status = in_be32(&hw->int_status);
1303 out_be32(&hw->int_mask, ints);
1305 return ret;
1308 static void free_irq_local(int irq)
1310 struct diu *hw = dr.diu_reg;
1312 /* Disable all LCDC interrupt */
1313 out_be32(&hw->int_mask, 0x1f);
1315 free_irq(irq, 0);
1318 #ifdef CONFIG_PM
1320 * Power management hooks. Note that we won't be called from IRQ context,
1321 * unlike the blank functions above, so we may sleep.
1323 static int fsl_diu_suspend(struct of_device *dev, pm_message_t state)
1325 struct fsl_diu_data *machine_data;
1327 machine_data = dev_get_drvdata(&ofdev->dev);
1328 disable_lcdc(machine_data->fsl_diu_info[0]);
1330 return 0;
1333 static int fsl_diu_resume(struct of_device *dev)
1335 struct fsl_diu_data *machine_data;
1337 machine_data = dev_get_drvdata(&ofdev->dev);
1338 enable_lcdc(machine_data->fsl_diu_info[0]);
1340 return 0;
1343 #else
1344 #define fsl_diu_suspend NULL
1345 #define fsl_diu_resume NULL
1346 #endif /* CONFIG_PM */
1348 /* Align to 64-bit(8-byte), 32-byte, etc. */
1349 static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
1351 u32 offset, ssize;
1352 u32 mask;
1353 dma_addr_t paddr = 0;
1355 ssize = size + bytes_align;
1356 buf->vaddr = dma_alloc_coherent(0, ssize, &paddr, GFP_DMA | __GFP_ZERO);
1357 if (!buf->vaddr)
1358 return -ENOMEM;
1360 buf->paddr = (__u32) paddr;
1362 mask = bytes_align - 1;
1363 offset = (u32)buf->paddr & mask;
1364 if (offset) {
1365 buf->offset = bytes_align - offset;
1366 buf->paddr = (u32)buf->paddr + offset;
1367 } else
1368 buf->offset = 0;
1369 return 0;
1372 static void free_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
1374 dma_free_coherent(0, size + bytes_align,
1375 buf->vaddr, (buf->paddr - buf->offset));
1376 return;
1379 static ssize_t store_monitor(struct device *device,
1380 struct device_attribute *attr, const char *buf, size_t count)
1382 int old_monitor_port;
1383 unsigned long val;
1384 struct fsl_diu_data *machine_data =
1385 container_of(attr, struct fsl_diu_data, dev_attr);
1387 if (strict_strtoul(buf, 10, &val))
1388 return 0;
1390 old_monitor_port = machine_data->monitor_port;
1391 machine_data->monitor_port = diu_ops.set_sysfs_monitor_port(val);
1393 if (old_monitor_port != machine_data->monitor_port) {
1394 /* All AOIs need adjust pixel format
1395 * fsl_diu_set_par only change the pixsel format here
1396 * unlikely to fail. */
1397 fsl_diu_set_par(machine_data->fsl_diu_info[0]);
1398 fsl_diu_set_par(machine_data->fsl_diu_info[1]);
1399 fsl_diu_set_par(machine_data->fsl_diu_info[2]);
1400 fsl_diu_set_par(machine_data->fsl_diu_info[3]);
1401 fsl_diu_set_par(machine_data->fsl_diu_info[4]);
1403 return count;
1406 static ssize_t show_monitor(struct device *device,
1407 struct device_attribute *attr, char *buf)
1409 struct fsl_diu_data *machine_data =
1410 container_of(attr, struct fsl_diu_data, dev_attr);
1411 return diu_ops.show_monitor_port(machine_data->monitor_port, buf);
1414 static int fsl_diu_probe(struct of_device *ofdev,
1415 const struct of_device_id *match)
1417 struct device_node *np = ofdev->node;
1418 struct mfb_info *mfbi;
1419 phys_addr_t dummy_ad_addr;
1420 int ret, i, error = 0;
1421 struct resource res;
1422 struct fsl_diu_data *machine_data;
1424 machine_data = kzalloc(sizeof(struct fsl_diu_data), GFP_KERNEL);
1425 if (!machine_data)
1426 return -ENOMEM;
1428 for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
1429 machine_data->fsl_diu_info[i] =
1430 framebuffer_alloc(sizeof(struct mfb_info), &ofdev->dev);
1431 if (!machine_data->fsl_diu_info[i]) {
1432 dev_err(&ofdev->dev, "cannot allocate memory\n");
1433 ret = -ENOMEM;
1434 goto error2;
1436 mfbi = machine_data->fsl_diu_info[i]->par;
1437 memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info));
1438 mfbi->parent = machine_data;
1441 ret = of_address_to_resource(np, 0, &res);
1442 if (ret) {
1443 dev_err(&ofdev->dev, "could not obtain DIU address\n");
1444 goto error;
1446 if (!res.start) {
1447 dev_err(&ofdev->dev, "invalid DIU address\n");
1448 goto error;
1450 dev_dbg(&ofdev->dev, "%s, res.start: 0x%08x\n", __func__, res.start);
1452 dr.diu_reg = ioremap(res.start, sizeof(struct diu));
1453 if (!dr.diu_reg) {
1454 dev_err(&ofdev->dev, "Err: can't map DIU registers!\n");
1455 ret = -EFAULT;
1456 goto error2;
1459 out_be32(&dr.diu_reg->diu_mode, 0); /* disable DIU anyway*/
1461 /* Get the IRQ of the DIU */
1462 machine_data->irq = irq_of_parse_and_map(np, 0);
1464 if (!machine_data->irq) {
1465 dev_err(&ofdev->dev, "could not get DIU IRQ\n");
1466 ret = -EINVAL;
1467 goto error;
1469 machine_data->monitor_port = monitor_port;
1471 /* Area descriptor memory pool aligns to 64-bit boundary */
1472 if (allocate_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8))
1473 return -ENOMEM;
1475 /* Get memory for Gamma Table - 32-byte aligned memory */
1476 if (allocate_buf(&pool.gamma, 768, 32)) {
1477 ret = -ENOMEM;
1478 goto error;
1481 /* For performance, cursor bitmap buffer aligns to 32-byte boundary */
1482 if (allocate_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32)) {
1483 ret = -ENOMEM;
1484 goto error;
1487 i = ARRAY_SIZE(machine_data->fsl_diu_info);
1488 machine_data->dummy_ad = (struct diu_ad *)
1489 ((u32)pool.ad.vaddr + pool.ad.offset) + i;
1490 machine_data->dummy_ad->paddr = pool.ad.paddr +
1491 i * sizeof(struct diu_ad);
1492 machine_data->dummy_aoi_virt = fsl_diu_alloc(64, &dummy_ad_addr);
1493 if (!machine_data->dummy_aoi_virt) {
1494 ret = -ENOMEM;
1495 goto error;
1497 machine_data->dummy_ad->addr = cpu_to_le32(dummy_ad_addr);
1498 machine_data->dummy_ad->pix_fmt = 0x88882317;
1499 machine_data->dummy_ad->src_size_g_alpha = cpu_to_le32((4 << 12) | 4);
1500 machine_data->dummy_ad->aoi_size = cpu_to_le32((4 << 16) | 2);
1501 machine_data->dummy_ad->offset_xyi = 0;
1502 machine_data->dummy_ad->offset_xyd = 0;
1503 machine_data->dummy_ad->next_ad = 0;
1505 out_be32(&dr.diu_reg->desc[0], machine_data->dummy_ad->paddr);
1506 out_be32(&dr.diu_reg->desc[1], machine_data->dummy_ad->paddr);
1507 out_be32(&dr.diu_reg->desc[2], machine_data->dummy_ad->paddr);
1509 for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
1510 machine_data->fsl_diu_info[i]->fix.smem_start = 0;
1511 mfbi = machine_data->fsl_diu_info[i]->par;
1512 mfbi->ad = (struct diu_ad *)((u32)pool.ad.vaddr
1513 + pool.ad.offset) + i;
1514 mfbi->ad->paddr = pool.ad.paddr + i * sizeof(struct diu_ad);
1515 ret = install_fb(machine_data->fsl_diu_info[i]);
1516 if (ret) {
1517 dev_err(&ofdev->dev,
1518 "Failed to register framebuffer %d\n",
1520 goto error;
1524 if (request_irq_local(machine_data->irq)) {
1525 dev_err(machine_data->fsl_diu_info[0]->dev,
1526 "could not request irq for diu.");
1527 goto error;
1530 machine_data->dev_attr.attr.name = "monitor";
1531 machine_data->dev_attr.attr.mode = S_IRUGO|S_IWUSR;
1532 machine_data->dev_attr.show = show_monitor;
1533 machine_data->dev_attr.store = store_monitor;
1534 error = device_create_file(machine_data->fsl_diu_info[0]->dev,
1535 &machine_data->dev_attr);
1536 if (error) {
1537 dev_err(machine_data->fsl_diu_info[0]->dev,
1538 "could not create sysfs %s file\n",
1539 machine_data->dev_attr.attr.name);
1542 dev_set_drvdata(&ofdev->dev, machine_data);
1543 return 0;
1545 error:
1546 for (i = ARRAY_SIZE(machine_data->fsl_diu_info);
1547 i > 0; i--)
1548 uninstall_fb(machine_data->fsl_diu_info[i - 1]);
1549 if (pool.ad.vaddr)
1550 free_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
1551 if (pool.gamma.vaddr)
1552 free_buf(&pool.gamma, 768, 32);
1553 if (pool.cursor.vaddr)
1554 free_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32);
1555 if (machine_data->dummy_aoi_virt)
1556 fsl_diu_free(machine_data->dummy_aoi_virt, 64);
1557 iounmap(dr.diu_reg);
1559 error2:
1560 for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
1561 if (machine_data->fsl_diu_info[i])
1562 framebuffer_release(machine_data->fsl_diu_info[i]);
1563 kfree(machine_data);
1565 return ret;
1569 static int fsl_diu_remove(struct of_device *ofdev)
1571 struct fsl_diu_data *machine_data;
1572 int i;
1574 machine_data = dev_get_drvdata(&ofdev->dev);
1575 disable_lcdc(machine_data->fsl_diu_info[0]);
1576 free_irq_local(machine_data->irq);
1577 for (i = ARRAY_SIZE(machine_data->fsl_diu_info); i > 0; i--)
1578 uninstall_fb(machine_data->fsl_diu_info[i - 1]);
1579 if (pool.ad.vaddr)
1580 free_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
1581 if (pool.gamma.vaddr)
1582 free_buf(&pool.gamma, 768, 32);
1583 if (pool.cursor.vaddr)
1584 free_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32);
1585 if (machine_data->dummy_aoi_virt)
1586 fsl_diu_free(machine_data->dummy_aoi_virt, 64);
1587 iounmap(dr.diu_reg);
1588 for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
1589 if (machine_data->fsl_diu_info[i])
1590 framebuffer_release(machine_data->fsl_diu_info[i]);
1591 kfree(machine_data);
1593 return 0;
1596 #ifndef MODULE
1597 static int __init fsl_diu_setup(char *options)
1599 char *opt;
1600 unsigned long val;
1602 if (!options || !*options)
1603 return 0;
1605 while ((opt = strsep(&options, ",")) != NULL) {
1606 if (!*opt)
1607 continue;
1608 if (!strncmp(opt, "monitor=", 8)) {
1609 if (!strict_strtoul(opt + 8, 10, &val) && (val <= 2))
1610 monitor_port = val;
1611 } else if (!strncmp(opt, "bpp=", 4)) {
1612 if (!strict_strtoul(opt + 4, 10, &val))
1613 default_bpp = val;
1614 } else
1615 fb_mode = opt;
1618 return 0;
1620 #endif
1622 static struct of_device_id fsl_diu_match[] = {
1624 .compatible = "fsl,diu",
1628 MODULE_DEVICE_TABLE(of, fsl_diu_match);
1630 static struct of_platform_driver fsl_diu_driver = {
1631 .owner = THIS_MODULE,
1632 .name = "fsl_diu",
1633 .match_table = fsl_diu_match,
1634 .probe = fsl_diu_probe,
1635 .remove = fsl_diu_remove,
1636 .suspend = fsl_diu_suspend,
1637 .resume = fsl_diu_resume,
1640 static int __init fsl_diu_init(void)
1642 #ifdef CONFIG_NOT_COHERENT_CACHE
1643 struct device_node *np;
1644 const u32 *prop;
1645 #endif
1646 int ret;
1647 #ifndef MODULE
1648 char *option;
1651 * For kernel boot options (in 'video=xxxfb:<options>' format)
1653 if (fb_get_options("fslfb", &option))
1654 return -ENODEV;
1655 fsl_diu_setup(option);
1656 #endif
1657 printk(KERN_INFO "Freescale DIU driver\n");
1659 #ifdef CONFIG_NOT_COHERENT_CACHE
1660 np = of_find_node_by_type(NULL, "cpu");
1661 if (!np) {
1662 printk(KERN_ERR "Err: can't find device node 'cpu'\n");
1663 return -ENODEV;
1666 prop = of_get_property(np, "d-cache-size", NULL);
1667 if (prop == NULL)
1668 return -ENODEV;
1670 /* Freescale PLRU requires 13/8 times the cache size to do a proper
1671 displacement flush
1673 coherence_data_size = *prop * 13;
1674 coherence_data_size /= 8;
1676 prop = of_get_property(np, "d-cache-line-size", NULL);
1677 if (prop == NULL)
1678 return -ENODEV;
1679 d_cache_line_size = *prop;
1681 of_node_put(np);
1682 coherence_data = vmalloc(coherence_data_size);
1683 if (!coherence_data)
1684 return -ENOMEM;
1685 #endif
1686 ret = of_register_platform_driver(&fsl_diu_driver);
1687 if (ret) {
1688 printk(KERN_ERR
1689 "fsl-diu: failed to register platform driver\n");
1690 #if defined(CONFIG_NOT_COHERENT_CACHE)
1691 vfree(coherence_data);
1692 #endif
1693 iounmap(dr.diu_reg);
1695 return ret;
1698 static void __exit fsl_diu_exit(void)
1700 of_unregister_platform_driver(&fsl_diu_driver);
1701 #if defined(CONFIG_NOT_COHERENT_CACHE)
1702 vfree(coherence_data);
1703 #endif
1706 module_init(fsl_diu_init);
1707 module_exit(fsl_diu_exit);
1709 MODULE_AUTHOR("York Sun <yorksun@freescale.com>");
1710 MODULE_DESCRIPTION("Freescale DIU framebuffer driver");
1711 MODULE_LICENSE("GPL");
1713 module_param_named(mode, fb_mode, charp, 0);
1714 MODULE_PARM_DESC(mode,
1715 "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
1716 module_param_named(bpp, default_bpp, ulong, 0);
1717 MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified mode");
1718 module_param_named(monitor, monitor_port, int, 0);
1719 MODULE_PARM_DESC(monitor,
1720 "Specify the monitor port (0, 1 or 2) if supported by the platform");