Linux 2.6.26-rc5
[linux-2.6/openmoko-kernel/knife-kernel.git] / include / asm-blackfin / mach-bf548 / defBF542.h
bloba7c809f29ede047ecb92ef3e7b1109b8995cd9b6
1 /*
2 * File: include/asm-blackfin/mach-bf548/defBF542.h
3 * Based on:
4 * Author:
6 * Created:
7 * Description:
9 * Rev:
11 * Modified:
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2, or (at your option)
18 * any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; see the file COPYING.
27 * If not, write to the Free Software Foundation,
28 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 #ifndef _DEF_BF542_H
32 #define _DEF_BF542_H
34 /* Include all Core registers and bit definitions */
35 #include <asm/mach-common/def_LPBlackfin.h>
37 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */
39 /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
40 #include "defBF54x_base.h"
42 /* The following are the #defines needed by ADSP-BF542 that are not in the common header */
44 /* ATAPI Registers */
46 #define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */
47 #define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */
48 #define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */
49 #define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */
50 #define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */
51 #define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */
52 #define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */
53 #define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */
54 #define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */
55 #define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */
56 #define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */
57 #define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */
58 #define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */
59 #define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */
60 #define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */
61 #define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */
62 #define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */
63 #define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */
64 #define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */
65 #define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */
66 #define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */
67 #define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */
68 #define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */
69 #define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */
70 #define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */
72 /* SDH Registers */
74 #define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */
75 #define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */
76 #define SDH_ARGUMENT 0xffc03908 /* SDH Argument */
77 #define SDH_COMMAND 0xffc0390c /* SDH Command */
78 #define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */
79 #define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */
80 #define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */
81 #define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */
82 #define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */
83 #define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */
84 #define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */
85 #define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */
86 #define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */
87 #define SDH_STATUS 0xffc03934 /* SDH Status */
88 #define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */
89 #define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */
90 #define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */
91 #define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */
92 #define SDH_FIFO 0xffc03980 /* SDH Data FIFO */
93 #define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */
94 #define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */
95 #define SDH_CFG 0xffc039c8 /* SDH Configuration */
96 #define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */
97 #define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */
98 #define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */
99 #define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */
100 #define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */
101 #define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */
102 #define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */
103 #define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */
104 #define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */
106 /* USB Control Registers */
108 #define USB_FADDR 0xffc03c00 /* Function address register */
109 #define USB_POWER 0xffc03c04 /* Power management register */
110 #define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
111 #define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */
112 #define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */
113 #define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */
114 #define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */
115 #define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */
116 #define USB_FRAME 0xffc03c20 /* USB frame number */
117 #define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */
118 #define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */
119 #define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
120 #define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */
122 /* USB Packet Control Registers */
124 #define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */
125 #define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
126 #define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
127 #define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */
128 #define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */
129 #define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
130 #define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
131 #define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
132 #define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
133 #define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
134 #define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
135 #define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
136 #define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */
138 /* USB Endpoint FIFO Registers */
140 #define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */
141 #define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */
142 #define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */
143 #define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */
144 #define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */
145 #define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */
146 #define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */
147 #define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */
149 /* USB OTG Control Registers */
151 #define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */
152 #define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */
153 #define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */
155 /* USB Phy Control Registers */
157 #define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */
158 #define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */
159 #define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */
160 #define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */
161 #define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */
163 /* (APHY_CNTRL is for ADI usage only) */
165 #define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */
167 /* (APHY_CALIB is for ADI usage only) */
169 #define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
170 #define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
172 /* (PHY_TEST is for ADI usage only) */
174 #define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */
175 #define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
176 #define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
178 /* USB Endpoint 0 Control Registers */
180 #define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */
181 #define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */
182 #define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */
183 #define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */
184 #define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */
185 #define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
186 #define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */
187 #define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
188 #define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
190 /* USB Endpoint 1 Control Registers */
192 #define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
193 #define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */
194 #define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */
195 #define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */
196 #define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */
197 #define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */
198 #define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
199 #define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */
200 #define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
201 #define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
203 /* USB Endpoint 2 Control Registers */
205 #define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
206 #define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */
207 #define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */
208 #define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */
209 #define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */
210 #define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */
211 #define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
212 #define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */
213 #define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
214 #define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
216 /* USB Endpoint 3 Control Registers */
218 #define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
219 #define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */
220 #define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */
221 #define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */
222 #define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */
223 #define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */
224 #define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
225 #define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */
226 #define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
227 #define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
229 /* USB Endpoint 4 Control Registers */
231 #define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
232 #define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */
233 #define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */
234 #define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */
235 #define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */
236 #define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */
237 #define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
238 #define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */
239 #define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
240 #define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
242 /* USB Endpoint 5 Control Registers */
244 #define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
245 #define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */
246 #define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */
247 #define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */
248 #define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */
249 #define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */
250 #define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
251 #define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */
252 #define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
253 #define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
255 /* USB Endpoint 6 Control Registers */
257 #define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
258 #define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */
259 #define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */
260 #define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */
261 #define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */
262 #define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */
263 #define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
264 #define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */
265 #define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
266 #define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
268 /* USB Endpoint 7 Control Registers */
270 #define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
271 #define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */
272 #define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */
273 #define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */
274 #define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */
275 #define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */
276 #define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
277 #define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */
278 #define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
279 #define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
280 #define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
281 #define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */
283 /* USB Channel 0 Config Registers */
285 #define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */
286 #define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
287 #define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
288 #define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
289 #define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
291 /* USB Channel 1 Config Registers */
293 #define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */
294 #define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
295 #define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
296 #define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
297 #define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
299 /* USB Channel 2 Config Registers */
301 #define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */
302 #define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
303 #define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
304 #define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
305 #define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
307 /* USB Channel 3 Config Registers */
309 #define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */
310 #define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
311 #define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
312 #define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
313 #define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
315 /* USB Channel 4 Config Registers */
317 #define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */
318 #define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
319 #define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
320 #define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
321 #define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
323 /* USB Channel 5 Config Registers */
325 #define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */
326 #define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
327 #define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
328 #define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
329 #define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
331 /* USB Channel 6 Config Registers */
333 #define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */
334 #define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
335 #define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
336 #define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
337 #define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
339 /* USB Channel 7 Config Registers */
341 #define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */
342 #define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
343 #define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
344 #define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
345 #define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
347 /* Keypad Registers */
349 #define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */
350 #define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */
351 #define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */
352 #define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */
353 #define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */
354 #define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */
357 /* ********************************************************** */
358 /* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
359 /* and MULTI BIT READ MACROS */
360 /* ********************************************************** */
362 /* Bit masks for KPAD_CTL */
364 #define KPAD_EN 0x1 /* Keypad Enable */
365 #define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
366 #define KPAD_ROWEN 0x1c00 /* Row Enable Width */
367 #define KPAD_COLEN 0xe000 /* Column Enable Width */
369 /* Bit masks for KPAD_PRESCALE */
371 #define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */
373 /* Bit masks for KPAD_MSEL */
375 #define DBON_SCALE 0xff /* Debounce Scale Value */
376 #define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */
378 /* Bit masks for KPAD_ROWCOL */
380 #define KPAD_ROW 0xff /* Rows Pressed */
381 #define KPAD_COL 0xff00 /* Columns Pressed */
383 /* Bit masks for KPAD_STAT */
385 #define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
386 #define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
387 #define KPAD_PRESSED 0x8 /* Key press current status */
389 /* Bit masks for KPAD_SOFTEVAL */
391 #define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
393 /* Bit masks for SDH_COMMAND */
395 #define CMD_IDX 0x3f /* Command Index */
396 #define CMD_RSP 0x40 /* Response */
397 #define CMD_L_RSP 0x80 /* Long Response */
398 #define CMD_INT_E 0x100 /* Command Interrupt */
399 #define CMD_PEND_E 0x200 /* Command Pending */
400 #define CMD_E 0x400 /* Command Enable */
402 /* Bit masks for SDH_PWR_CTL */
404 #define PWR_ON 0x3 /* Power On */
405 #if 0
406 #define TBD 0x3c /* TBD */
407 #endif
408 #define SD_CMD_OD 0x40 /* Open Drain Output */
409 #define ROD_CTL 0x80 /* Rod Control */
411 /* Bit masks for SDH_CLK_CTL */
413 #define CLKDIV 0xff /* MC_CLK Divisor */
414 #define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
415 #define PWR_SV_E 0x200 /* Power Save Enable */
416 #define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
417 #define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
419 /* Bit masks for SDH_RESP_CMD */
421 #define RESP_CMD 0x3f /* Response Command */
423 /* Bit masks for SDH_DATA_CTL */
425 #define DTX_E 0x1 /* Data Transfer Enable */
426 #define DTX_DIR 0x2 /* Data Transfer Direction */
427 #define DTX_MODE 0x4 /* Data Transfer Mode */
428 #define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
429 #define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
431 /* Bit masks for SDH_STATUS */
433 #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
434 #define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
435 #define CMD_TIME_OUT 0x4 /* CMD Time Out */
436 #define DAT_TIME_OUT 0x8 /* Data Time Out */
437 #define TX_UNDERRUN 0x10 /* Transmit Underrun */
438 #define RX_OVERRUN 0x20 /* Receive Overrun */
439 #define CMD_RESP_END 0x40 /* CMD Response End */
440 #define CMD_SENT 0x80 /* CMD Sent */
441 #define DAT_END 0x100 /* Data End */
442 #define START_BIT_ERR 0x200 /* Start Bit Error */
443 #define DAT_BLK_END 0x400 /* Data Block End */
444 #define CMD_ACT 0x800 /* CMD Active */
445 #define TX_ACT 0x1000 /* Transmit Active */
446 #define RX_ACT 0x2000 /* Receive Active */
447 #define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
448 #define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
449 #define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
450 #define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
451 #define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
452 #define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
453 #define TX_DAT_RDY 0x100000 /* Transmit Data Available */
454 #define RX_FIFO_RDY 0x200000 /* Receive Data Available */
456 /* Bit masks for SDH_STATUS_CLR */
458 #define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
459 #define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
460 #define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
461 #define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
462 #define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
463 #define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
464 #define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
465 #define CMD_SENT_STAT 0x80 /* CMD Sent Status */
466 #define DAT_END_STAT 0x100 /* Data End Status */
467 #define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
468 #define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
470 /* Bit masks for SDH_MASK0 */
472 #define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
473 #define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
474 #define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
475 #define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
476 #define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
477 #define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
478 #define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
479 #define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
480 #define DAT_END_MASK 0x100 /* Data End Mask */
481 #define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
482 #define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
483 #define CMD_ACT_MASK 0x800 /* CMD Active Mask */
484 #define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
485 #define RX_ACT_MASK 0x2000 /* Receive Active Mask */
486 #define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
487 #define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
488 #define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
489 #define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
490 #define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
491 #define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
492 #define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
493 #define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
495 /* Bit masks for SDH_FIFO_CNT */
497 #define FIFO_COUNT 0x7fff /* FIFO Count */
499 /* Bit masks for SDH_E_STATUS */
501 #define SDIO_INT_DET 0x2 /* SDIO Int Detected */
502 #define SD_CARD_DET 0x10 /* SD Card Detect */
504 /* Bit masks for SDH_E_MASK */
506 #define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
507 #define SCD_MSK 0x40 /* Mask Card Detect */
509 /* Bit masks for SDH_CFG */
511 #define CLKS_EN 0x1 /* Clocks Enable */
512 #define SD4E 0x4 /* SDIO 4-Bit Enable */
513 #define MWE 0x8 /* Moving Window Enable */
514 #define SD_RST 0x10 /* SDMMC Reset */
515 #define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
516 #define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
517 #define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
519 /* Bit masks for SDH_RD_WAIT_EN */
521 #define RWR 0x1 /* Read Wait Request */
523 /* Bit masks for ATAPI_CONTROL */
525 #define PIO_START 0x1 /* Start PIO/Reg Op */
526 #define MULTI_START 0x2 /* Start Multi-DMA Op */
527 #define ULTRA_START 0x4 /* Start Ultra-DMA Op */
528 #define XFER_DIR 0x8 /* Transfer Direction */
529 #define IORDY_EN 0x10 /* IORDY Enable */
530 #define FIFO_FLUSH 0x20 /* Flush FIFOs */
531 #define SOFT_RST 0x40 /* Soft Reset */
532 #define DEV_RST 0x80 /* Device Reset */
533 #define TFRCNT_RST 0x100 /* Trans Count Reset */
534 #define END_ON_TERM 0x200 /* End/Terminate Select */
535 #define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
536 #define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
538 /* Bit masks for ATAPI_STATUS */
540 #define PIO_XFER_ON 0x1 /* PIO transfer in progress */
541 #define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
542 #define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
543 #define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
545 /* Bit masks for ATAPI_DEV_ADDR */
547 #define DEV_ADDR 0x1f /* Device Address */
549 /* Bit masks for ATAPI_INT_MASK */
551 #define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
552 #define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
553 #define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
554 #define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
555 #define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
556 #define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
557 #define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
558 #define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
559 #define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
561 /* Bit masks for ATAPI_INT_STATUS */
563 #define ATAPI_DEV_INT 0x1 /* Device interrupt status */
564 #define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
565 #define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
566 #define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
567 #define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
568 #define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
569 #define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
570 #define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
571 #define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
573 /* Bit masks for ATAPI_LINE_STATUS */
575 #define ATAPI_INTR 0x1 /* Device interrupt to host line status */
576 #define ATAPI_DASP 0x2 /* Device dasp to host line status */
577 #define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
578 #define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
579 #define ATAPI_ADDR 0x70 /* ATAPI address line status */
580 #define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
581 #define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
582 #define ATAPI_DIOWN 0x200 /* ATAPI write line status */
583 #define ATAPI_DIORN 0x400 /* ATAPI read line status */
584 #define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
586 /* Bit masks for ATAPI_SM_STATE */
588 #define PIO_CSTATE 0xf /* PIO mode state machine current state */
589 #define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
590 #define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
591 #define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
593 /* Bit masks for ATAPI_TERMINATE */
595 #define ATAPI_HOST_TERM 0x1 /* Host terminationation */
597 /* Bit masks for ATAPI_REG_TIM_0 */
599 #define T2_REG 0xff /* End of cycle time for register access transfers */
600 #define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
602 /* Bit masks for ATAPI_PIO_TIM_0 */
604 #define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
605 #define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
606 #define T4_REG 0xf000 /* DIOW data hold */
608 /* Bit masks for ATAPI_PIO_TIM_1 */
610 #define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
612 /* Bit masks for ATAPI_MULTI_TIM_0 */
614 #define TD 0xff /* DIOR/DIOW asserted pulsewidth */
615 #define TM 0xff00 /* Time from address valid to DIOR/DIOW */
617 /* Bit masks for ATAPI_MULTI_TIM_1 */
619 #define TKW 0xff /* Selects DIOW negated pulsewidth */
620 #define TKR 0xff00 /* Selects DIOR negated pulsewidth */
622 /* Bit masks for ATAPI_MULTI_TIM_2 */
624 #define TH 0xff /* Selects DIOW data hold */
625 #define TEOC 0xff00 /* Selects end of cycle for DMA */
627 /* Bit masks for ATAPI_ULTRA_TIM_0 */
629 #define TACK 0xff /* Selects setup and hold times for TACK */
630 #define TENV 0xff00 /* Selects envelope time */
632 /* Bit masks for ATAPI_ULTRA_TIM_1 */
634 #define TDVS 0xff /* Selects data valid setup time */
635 #define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
637 /* Bit masks for ATAPI_ULTRA_TIM_2 */
639 #define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
640 #define TMLI 0xff00 /* Selects interlock time */
642 /* Bit masks for ATAPI_ULTRA_TIM_3 */
644 #define TZAH 0xff /* Selects minimum delay required for output */
645 #define READY_PAUSE 0xff00 /* Selects ready to pause */
647 /* Bit masks for USB_FADDR */
649 #define FUNCTION_ADDRESS 0x7f /* Function address */
651 /* Bit masks for USB_POWER */
653 #define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
654 #define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
655 #define RESUME_MODE 0x4 /* DMA Mode */
656 #define RESET 0x8 /* Reset indicator */
657 #define HS_MODE 0x10 /* High Speed mode indicator */
658 #define HS_ENABLE 0x20 /* high Speed Enable */
659 #define SOFT_CONN 0x40 /* Soft connect */
660 #define ISO_UPDATE 0x80 /* Isochronous update */
662 /* Bit masks for USB_INTRTX */
664 #define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
665 #define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
666 #define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
667 #define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
668 #define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
669 #define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
670 #define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
671 #define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
673 /* Bit masks for USB_INTRRX */
675 #define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
676 #define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
677 #define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
678 #define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
679 #define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
680 #define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
681 #define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
683 /* Bit masks for USB_INTRTXE */
685 #define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
686 #define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
687 #define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
688 #define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
689 #define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
690 #define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
691 #define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
692 #define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
694 /* Bit masks for USB_INTRRXE */
696 #define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
697 #define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
698 #define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
699 #define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
700 #define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
701 #define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
702 #define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
704 /* Bit masks for USB_INTRUSB */
706 #define SUSPEND_B 0x1 /* Suspend indicator */
707 #define RESUME_B 0x2 /* Resume indicator */
708 #define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
709 #define SOF_B 0x8 /* Start of frame */
710 #define CONN_B 0x10 /* Connection indicator */
711 #define DISCON_B 0x20 /* Disconnect indicator */
712 #define SESSION_REQ_B 0x40 /* Session Request */
713 #define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
715 /* Bit masks for USB_INTRUSBE */
717 #define SUSPEND_BE 0x1 /* Suspend indicator int enable */
718 #define RESUME_BE 0x2 /* Resume indicator int enable */
719 #define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
720 #define SOF_BE 0x8 /* Start of frame int enable */
721 #define CONN_BE 0x10 /* Connection indicator int enable */
722 #define DISCON_BE 0x20 /* Disconnect indicator int enable */
723 #define SESSION_REQ_BE 0x40 /* Session Request int enable */
724 #define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
726 /* Bit masks for USB_FRAME */
728 #define FRAME_NUMBER 0x7ff /* Frame number */
730 /* Bit masks for USB_INDEX */
732 #define SELECTED_ENDPOINT 0xf /* selected endpoint */
734 /* Bit masks for USB_GLOBAL_CTL */
736 #define GLOBAL_ENA 0x1 /* enables USB module */
737 #define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
738 #define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
739 #define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
740 #define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
741 #define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
742 #define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
743 #define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
744 #define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
745 #define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
746 #define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
747 #define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
748 #define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
749 #define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
750 #define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
752 /* Bit masks for USB_OTG_DEV_CTL */
754 #define SESSION 0x1 /* session indicator */
755 #define HOST_REQ 0x2 /* Host negotiation request */
756 #define HOST_MODE 0x4 /* indicates USBDRC is a host */
757 #define VBUS0 0x8 /* Vbus level indicator[0] */
758 #define VBUS1 0x10 /* Vbus level indicator[1] */
759 #define LSDEV 0x20 /* Low-speed indicator */
760 #define FSDEV 0x40 /* Full or High-speed indicator */
761 #define B_DEVICE 0x80 /* A' or 'B' device indicator */
763 /* Bit masks for USB_OTG_VBUS_IRQ */
765 #define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
766 #define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
767 #define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
768 #define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
769 #define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
770 #define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
772 /* Bit masks for USB_OTG_VBUS_MASK */
774 #define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
775 #define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
776 #define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
777 #define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
778 #define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
779 #define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
781 /* Bit masks for USB_CSR0 */
783 #define RXPKTRDY 0x1 /* data packet receive indicator */
784 #define TXPKTRDY 0x2 /* data packet in FIFO indicator */
785 #define STALL_SENT 0x4 /* STALL handshake sent */
786 #define DATAEND 0x8 /* Data end indicator */
787 #define SETUPEND 0x10 /* Setup end */
788 #define SENDSTALL 0x20 /* Send STALL handshake */
789 #define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
790 #define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
791 #define FLUSHFIFO 0x100 /* flush endpoint FIFO */
792 #define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
793 #define SETUPPKT_H 0x8 /* send Setup token host mode */
794 #define ERROR_H 0x10 /* timeout error indicator host mode */
795 #define REQPKT_H 0x20 /* Request an IN transaction host mode */
796 #define STATUSPKT_H 0x40 /* Status stage transaction host mode */
797 #define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
799 /* Bit masks for USB_COUNT0 */
801 #define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
803 /* Bit masks for USB_NAKLIMIT0 */
805 #define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
807 /* Bit masks for USB_TX_MAX_PACKET */
809 #define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
811 /* Bit masks for USB_RX_MAX_PACKET */
813 #define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
815 /* Bit masks for USB_TXCSR */
817 #define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
818 #define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
819 #define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
820 #define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
821 #define STALL_SEND_T 0x10 /* issue a Stall handshake */
822 #define STALL_SENT_T 0x20 /* Stall handshake transmitted */
823 #define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
824 #define INCOMPTX_T 0x80 /* indicates that a large packet is split */
825 #define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
826 #define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
827 #define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
828 #define ISO_T 0x4000 /* enable Isochronous transfers */
829 #define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
830 #define ERROR_TH 0x4 /* error condition host mode */
831 #define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
832 #define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
834 /* Bit masks for USB_TXCOUNT */
836 #define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
838 /* Bit masks for USB_RXCSR */
840 #define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
841 #define FIFO_FULL_R 0x2 /* FIFO not empty */
842 #define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
843 #define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
844 #define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
845 #define STALL_SEND_R 0x20 /* issue a Stall handshake */
846 #define STALL_SENT_R 0x40 /* Stall handshake transmitted */
847 #define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
848 #define INCOMPRX_R 0x100 /* indicates that a large packet is split */
849 #define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
850 #define DISNYET_R 0x1000 /* disable Nyet handshakes */
851 #define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
852 #define ISO_R 0x4000 /* enable Isochronous transfers */
853 #define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
854 #define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
855 #define REQPKT_RH 0x20 /* request an IN transaction host mode */
856 #define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
857 #define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
858 #define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
859 #define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
861 /* Bit masks for USB_RXCOUNT */
863 #define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
865 /* Bit masks for USB_TXTYPE */
867 #define TARGET_EP_NO_T 0xf /* EP number */
868 #define PROTOCOL_T 0xc /* transfer type */
870 /* Bit masks for USB_TXINTERVAL */
872 #define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
874 /* Bit masks for USB_RXTYPE */
876 #define TARGET_EP_NO_R 0xf /* EP number */
877 #define PROTOCOL_R 0xc /* transfer type */
879 /* Bit masks for USB_RXINTERVAL */
881 #define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
883 /* Bit masks for USB_DMA_INTERRUPT */
885 #define DMA0_INT 0x1 /* DMA0 pending interrupt */
886 #define DMA1_INT 0x2 /* DMA1 pending interrupt */
887 #define DMA2_INT 0x4 /* DMA2 pending interrupt */
888 #define DMA3_INT 0x8 /* DMA3 pending interrupt */
889 #define DMA4_INT 0x10 /* DMA4 pending interrupt */
890 #define DMA5_INT 0x20 /* DMA5 pending interrupt */
891 #define DMA6_INT 0x40 /* DMA6 pending interrupt */
892 #define DMA7_INT 0x80 /* DMA7 pending interrupt */
894 /* Bit masks for USB_DMAxCONTROL */
896 #define DMA_ENA 0x1 /* DMA enable */
897 #define DIRECTION 0x2 /* direction of DMA transfer */
898 #define MODE 0x4 /* DMA Bus error */
899 #define INT_ENA 0x8 /* Interrupt enable */
900 #define EPNUM 0xf0 /* EP number */
901 #define BUSERROR 0x100 /* DMA Bus error */
903 /* Bit masks for USB_DMAxADDRHIGH */
905 #define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
907 /* Bit masks for USB_DMAxADDRLOW */
909 #define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
911 /* Bit masks for USB_DMAxCOUNTHIGH */
913 #define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
915 /* Bit masks for USB_DMAxCOUNTLOW */
917 #define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
920 /* ******************************************* */
921 /* MULTI BIT MACRO ENUMERATIONS */
922 /* ******************************************* */
925 #endif /* _DEF_BF542_H */