Linux 2.6.26-rc5
[linux-2.6/openmoko-kernel/knife-kernel.git] / include / linux / i2c-algo-pca.h
blobadcb3dc7ac26dcb647aee61c9dd2f3f22ab91f6c
1 #ifndef _LINUX_I2C_ALGO_PCA_H
2 #define _LINUX_I2C_ALGO_PCA_H
4 /* Clock speeds for the bus */
5 #define I2C_PCA_CON_330kHz 0x00
6 #define I2C_PCA_CON_288kHz 0x01
7 #define I2C_PCA_CON_217kHz 0x02
8 #define I2C_PCA_CON_146kHz 0x03
9 #define I2C_PCA_CON_88kHz 0x04
10 #define I2C_PCA_CON_59kHz 0x05
11 #define I2C_PCA_CON_44kHz 0x06
12 #define I2C_PCA_CON_36kHz 0x07
14 /* PCA9564 registers */
15 #define I2C_PCA_STA 0x00 /* STATUS Read Only */
16 #define I2C_PCA_TO 0x00 /* TIMEOUT Write Only */
17 #define I2C_PCA_DAT 0x01 /* DATA Read/Write */
18 #define I2C_PCA_ADR 0x02 /* OWN ADR Read/Write */
19 #define I2C_PCA_CON 0x03 /* CONTROL Read/Write */
21 #define I2C_PCA_CON_AA 0x80 /* Assert Acknowledge */
22 #define I2C_PCA_CON_ENSIO 0x40 /* Enable */
23 #define I2C_PCA_CON_STA 0x20 /* Start */
24 #define I2C_PCA_CON_STO 0x10 /* Stop */
25 #define I2C_PCA_CON_SI 0x08 /* Serial Interrupt */
26 #define I2C_PCA_CON_CR 0x07 /* Clock Rate (MASK) */
28 struct i2c_algo_pca_data {
29 void *data; /* private low level data */
30 void (*write_byte) (void *data, int reg, int val);
31 int (*read_byte) (void *data, int reg);
32 int (*wait_for_completion) (void *data);
33 void (*reset_chip) (void *data);
34 /* i2c_clock values are defined in linux/i2c-algo-pca.h */
35 unsigned int i2c_clock;
38 int i2c_pca_add_bus(struct i2c_adapter *);
39 int i2c_pca_add_numbered_bus(struct i2c_adapter *);
41 #endif /* _LINUX_I2C_ALGO_PCA_H */