2 * Low-Level PCI Access for i386 machines.
4 * (c) 1999 Martin Mares <mj@ucw.cz>
10 #define DBG(x...) printk(x)
15 #define PCI_PROBE_BIOS 0x0001
16 #define PCI_PROBE_CONF1 0x0002
17 #define PCI_PROBE_CONF2 0x0004
18 #define PCI_PROBE_MMCONF 0x0008
19 #define PCI_PROBE_MASK 0x000f
20 #define PCI_PROBE_NOEARLY 0x0010
22 #define PCI_NO_SORT 0x0100
23 #define PCI_BIOS_SORT 0x0200
24 #define PCI_NO_CHECKS 0x0400
25 #define PCI_USE_PIRQ_MASK 0x0800
26 #define PCI_ASSIGN_ROMS 0x1000
27 #define PCI_BIOS_IRQ_SCAN 0x2000
28 #define PCI_ASSIGN_ALL_BUSSES 0x4000
29 #define PCI_CAN_SKIP_ISA_ALIGN 0x8000
30 #define PCI_USE__CRS 0x10000
32 extern unsigned int pci_probe
;
33 extern unsigned long pirq_table_addr
;
35 enum pci_bf_sort_state
{
44 extern unsigned int pcibios_max_latency
;
46 void pcibios_resource_survey(void);
47 int pcibios_enable_resources(struct pci_dev
*, int);
51 extern int pcibios_last_bus
;
52 extern struct pci_bus
*pci_root_bus
;
53 extern struct pci_ops pci_root_ops
;
58 u8 bus
, devfn
; /* Bus, device and function */
60 u8 link
; /* IRQ line ID, chipset dependent, 0=not routed */
61 u16 bitmap
; /* Available IRQs */
62 } __attribute__((packed
)) irq
[4];
63 u8 slot
; /* Slot number, 0=onboard */
65 } __attribute__((packed
));
67 struct irq_routing_table
{
68 u32 signature
; /* PIRQ_SIGNATURE should be here */
69 u16 version
; /* PIRQ_VERSION */
70 u16 size
; /* Table size in bytes */
71 u8 rtr_bus
, rtr_devfn
; /* Where the interrupt router lies */
72 u16 exclusive_irqs
; /* IRQs devoted exclusively to PCI usage */
73 u16 rtr_vendor
, rtr_device
; /* Vendor and device ID of interrupt router */
74 u32 miniport_data
; /* Crap */
76 u8 checksum
; /* Modulo 256 checksum must give zero */
77 struct irq_info slots
[0];
78 } __attribute__((packed
));
80 extern unsigned int pcibios_irq_mask
;
82 extern int pcibios_scanned
;
83 extern spinlock_t pci_config_lock
;
85 extern int (*pcibios_enable_irq
)(struct pci_dev
*dev
);
86 extern void (*pcibios_disable_irq
)(struct pci_dev
*dev
);
89 int (*read
)(unsigned int domain
, unsigned int bus
, unsigned int devfn
,
90 int reg
, int len
, u32
*val
);
91 int (*write
)(unsigned int domain
, unsigned int bus
, unsigned int devfn
,
92 int reg
, int len
, u32 val
);
95 extern struct pci_raw_ops
*raw_pci_ops
;
96 extern struct pci_raw_ops
*raw_pci_ext_ops
;
98 extern struct pci_raw_ops pci_direct_conf1
;
100 extern int pci_direct_probe(void);
101 extern void pci_direct_init(int type
);
102 extern void pci_pcbios_init(void);
103 extern void pci_mmcfg_init(int type
);
104 extern void pcibios_sort(void);
108 extern int __init
pci_mmcfg_arch_init(void);
111 * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
112 * on their northbrige except through the * %eax register. As such, you MUST
113 * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
114 * accessor functions.
115 * In fact just use pci_config_*, nothing else please.
117 static inline unsigned char mmio_config_readb(void __iomem
*pos
)
120 asm volatile("movb (%1),%%al" : "=a" (val
) : "r" (pos
));
124 static inline unsigned short mmio_config_readw(void __iomem
*pos
)
127 asm volatile("movw (%1),%%ax" : "=a" (val
) : "r" (pos
));
131 static inline unsigned int mmio_config_readl(void __iomem
*pos
)
134 asm volatile("movl (%1),%%eax" : "=a" (val
) : "r" (pos
));
138 static inline void mmio_config_writeb(void __iomem
*pos
, u8 val
)
140 asm volatile("movb %%al,(%1)" :: "a" (val
), "r" (pos
) : "memory");
143 static inline void mmio_config_writew(void __iomem
*pos
, u16 val
)
145 asm volatile("movw %%ax,(%1)" :: "a" (val
), "r" (pos
) : "memory");
148 static inline void mmio_config_writel(void __iomem
*pos
, u32 val
)
150 asm volatile("movl %%eax,(%1)" :: "a" (val
), "r" (pos
) : "memory");