acpi: fix integer as NULL pointer warning
[linux-2.6/openmoko-kernel/knife-kernel.git] / include / asm-sparc64 / ns87303.h
blob686defe6aaa0cbe2ef0078ae4c70c668f814780a
1 /* ns87303.h: Configuration Register Description for the
2 * National Semiconductor PC87303 (SuperIO).
4 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
5 */
7 #ifndef _SPARC_NS87303_H
8 #define _SPARC_NS87303_H 1
11 * Control Register Index Values
13 #define FER 0x00
14 #define FAR 0x01
15 #define PTR 0x02
16 #define FCR 0x03
17 #define PCR 0x04
18 #define KRR 0x05
19 #define PMC 0x06
20 #define TUP 0x07
21 #define SID 0x08
22 #define ASC 0x09
23 #define CS0CF0 0x0a
24 #define CS0CF1 0x0b
25 #define CS1CF0 0x0c
26 #define CS1CF1 0x0d
28 /* Function Enable Register (FER) bits */
29 #define FER_EDM 0x10 /* Encoded Drive and Motor pin information */
31 /* Function Address Register (FAR) bits */
32 #define FAR_LPT_MASK 0x03
33 #define FAR_LPTB 0x00
34 #define FAR_LPTA 0x01
35 #define FAR_LPTC 0x02
37 /* Power and Test Register (PTR) bits */
38 #define PTR_LPTB_IRQ7 0x08
39 #define PTR_LEVEL_IRQ 0x80 /* When not ECP/EPP: Use level IRQ */
40 #define PTR_LPT_REG_DIR 0x80 /* When ECP/EPP: LPT CTR controlls direction */
41 /* of the parallel port */
43 /* Function Control Register (FCR) bits */
44 #define FCR_LDE 0x10 /* Logical Drive Exchange */
45 #define FCR_ZWS_ENA 0x20 /* Enable short host read/write in ECP/EPP */
47 /* Printer Control Register (PCR) bits */
48 #define PCR_EPP_ENABLE 0x01
49 #define PCR_EPP_IEEE 0x02 /* Enable EPP Version 1.9 (IEEE 1284) */
50 #define PCR_ECP_ENABLE 0x04
51 #define PCR_ECP_CLK_ENA 0x08 /* If 0 ECP Clock is stopped on Power down */
52 #define PCR_IRQ_POLAR 0x20 /* If 0 IRQ is level high or negative pulse, */
53 /* if 1 polarity is inverted */
54 #define PCR_IRQ_ODRAIN 0x40 /* If 1, IRQ is open drain */
56 /* Tape UARTs and Parallel Port Config Register (TUP) bits */
57 #define TUP_EPP_TIMO 0x02 /* Enable EPP timeout IRQ */
59 /* Advanced SuperIO Config Register (ASC) bits */
60 #define ASC_LPT_IRQ7 0x01 /* Always use IRQ7 for LPT */
61 #define ASC_DRV2_SEL 0x02 /* Logical Drive Exchange controlled by TDR */
63 #define FER_RESERVED 0x00
64 #define FAR_RESERVED 0x00
65 #define PTR_RESERVED 0x73
66 #define FCR_RESERVED 0xc4
67 #define PCR_RESERVED 0x10
68 #define KRR_RESERVED 0x00
69 #define PMC_RESERVED 0x98
70 #define TUP_RESERVED 0xfb
71 #define SIP_RESERVED 0x00
72 #define ASC_RESERVED 0x18
73 #define CS0CF0_RESERVED 0x00
74 #define CS0CF1_RESERVED 0x08
75 #define CS1CF0_RESERVED 0x00
76 #define CS1CF1_RESERVED 0x08
78 #ifdef __KERNEL__
80 #include <linux/spinlock.h>
82 #include <asm/system.h>
83 #include <asm/io.h>
85 extern spinlock_t ns87303_lock;
87 static inline int ns87303_modify(unsigned long port, unsigned int index,
88 unsigned char clr, unsigned char set)
90 static unsigned char reserved[] = {
91 FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED,
92 PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED,
93 SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED,
94 CS1CF0_RESERVED, CS1CF1_RESERVED
96 unsigned long flags;
97 unsigned char value;
99 if (index > 0x0d)
100 return -EINVAL;
102 spin_lock_irqsave(&ns87303_lock, flags);
104 outb(index, port);
105 value = inb(port + 1);
106 value &= ~(reserved[index] | clr);
107 value |= set;
108 outb(value, port + 1);
109 outb(value, port + 1);
111 spin_unlock_irqrestore(&ns87303_lock, flags);
113 return 0;
116 #endif /* __KERNEL__ */
118 #endif /* !(_SPARC_NS87303_H) */