pnp: add pnp_build_option() to the API
[linux-2.6/openmoko-kernel/knife-kernel.git] / include / asm-m68knommu / mcftimer.h
blob0f90f6d2227a7993acefba1a3caaff4c626e9257
1 /****************************************************************************/
3 /*
4 * mcftimer.h -- ColdFire internal TIMER support defines.
6 * (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>
7 * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
8 */
10 /****************************************************************************/
11 #ifndef mcftimer_h
12 #define mcftimer_h
13 /****************************************************************************/
17 * Get address specific defines for this ColdFire member.
19 #if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
20 #define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */
21 #define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */
22 #elif defined(CONFIG_M5272)
23 #define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */
24 #define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */
25 #define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */
26 #define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */
27 #elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
28 #define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */
29 #define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */
30 #elif defined(CONFIG_M532x)
31 #define MCFTIMER_BASE1 0xfc070000 /* Base address of TIMER1 */
32 #define MCFTIMER_BASE2 0xfc074000 /* Base address of TIMER2 */
33 #define MCFTIMER_BASE3 0xfc078000 /* Base address of TIMER3 */
34 #define MCFTIMER_BASE4 0xfc07c000 /* Base address of TIMER4 */
35 #endif
39 * Define the TIMER register set addresses.
41 #define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */
42 #define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */
43 #define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */
44 #define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */
45 #if defined(CONFIG_M532x)
46 #define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */
47 #else
48 #define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */
49 #endif
52 * Bit definitions for the Timer Mode Register (TMR).
53 * Register bit flags are common accross ColdFires.
55 #define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */
56 #define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */
57 #define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */
58 #define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */
59 #define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */
60 #define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */
61 #define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */
62 #define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */
63 #define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */
64 #define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */
65 #define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */
66 #define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */
67 #define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */
68 #define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */
69 #define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */
70 #define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */
71 #define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */
74 * Bit definitions for the Timer Event Registers (TER).
76 #define MCFTIMER_TER_CAP 0x01 /* Capture event */
77 #define MCFTIMER_TER_REF 0x02 /* Refernece event */
79 /****************************************************************************/
80 #endif /* mcftimer_h */