2 * linux/sound/pxa2xx-ac97.c -- AC97 support for the Intel PXA2xx chip.
4 * Author: Nicolas Pitre
5 * Created: Dec 02, 2004
6 * Copyright: MontaVista Software Inc.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #include <linux/init.h>
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/platform_device.h>
17 #include <linux/interrupt.h>
18 #include <linux/wait.h>
19 #include <linux/delay.h>
21 #include <sound/driver.h>
22 #include <sound/core.h>
23 #include <sound/pcm.h>
24 #include <sound/ac97_codec.h>
25 #include <sound/initval.h>
28 #include <linux/mutex.h>
29 #include <asm/hardware.h>
30 #include <asm/arch/pxa-regs.h>
31 #include <asm/arch/audio.h>
33 #include "pxa2xx-pcm.h"
36 static DEFINE_MUTEX(car_mutex
);
37 static DECLARE_WAIT_QUEUE_HEAD(gsr_wq
);
38 static volatile long gsr_bits
;
43 * o Slot 12 read from modem space will hang controller.
44 * o CDONE, SDONE interrupt fails after any slot 12 IO.
46 * We therefore have an hybrid approach for waiting on SDONE (interrupt or
47 * 1 jiffy timeout if interrupt never comes).
50 static unsigned short pxa2xx_ac97_read(struct snd_ac97
*ac97
, unsigned short reg
)
52 unsigned short val
= -1;
53 volatile u32
*reg_addr
;
55 mutex_lock(&car_mutex
);
57 /* set up primary or secondary codec space */
58 reg_addr
= (ac97
->num
& 1) ? &SAC_REG_BASE
: &PAC_REG_BASE
;
59 reg_addr
+= (reg
>> 1);
61 /* start read access across the ac97 link */
62 GSR
= GSR_CDONE
| GSR_SDONE
;
65 if (reg
== AC97_GPIO_STATUS
)
67 if (wait_event_timeout(gsr_wq
, (GSR
| gsr_bits
) & GSR_SDONE
, 1) <= 0 &&
68 !((GSR
| gsr_bits
) & GSR_SDONE
)) {
69 printk(KERN_ERR
"%s: read error (ac97_reg=%d GSR=%#lx)\n",
70 __FUNCTION__
, reg
, GSR
| gsr_bits
);
76 GSR
= GSR_CDONE
| GSR_SDONE
;
79 /* but we've just started another cycle... */
80 wait_event_timeout(gsr_wq
, (GSR
| gsr_bits
) & GSR_SDONE
, 1);
82 out
: mutex_unlock(&car_mutex
);
86 static void pxa2xx_ac97_write(struct snd_ac97
*ac97
, unsigned short reg
, unsigned short val
)
88 volatile u32
*reg_addr
;
90 mutex_lock(&car_mutex
);
92 /* set up primary or secondary codec space */
93 reg_addr
= (ac97
->num
& 1) ? &SAC_REG_BASE
: &PAC_REG_BASE
;
94 reg_addr
+= (reg
>> 1);
96 GSR
= GSR_CDONE
| GSR_SDONE
;
99 if (wait_event_timeout(gsr_wq
, (GSR
| gsr_bits
) & GSR_CDONE
, 1) <= 0 &&
100 !((GSR
| gsr_bits
) & GSR_CDONE
))
101 printk(KERN_ERR
"%s: write error (ac97_reg=%d GSR=%#lx)\n",
102 __FUNCTION__
, reg
, GSR
| gsr_bits
);
104 mutex_unlock(&car_mutex
);
107 static void pxa2xx_ac97_reset(struct snd_ac97
*ac97
)
109 /* First, try cold reset */
110 GCR
&= GCR_COLD_RST
; /* clear everything but nCRST */
111 GCR
&= ~GCR_COLD_RST
; /* then assert nCRST */
115 /* PXA27x Developers Manual section 13.5.2.2.1 */
116 pxa_set_cken(1 << 31, 1);
118 pxa_set_cken(1 << 31, 0);
123 GCR
|= GCR_CDONE_IE
|GCR_SDONE_IE
;
124 wait_event_timeout(gsr_wq
, gsr_bits
& (GSR_PCR
| GSR_SCR
), 1);
127 if (!((GSR
| gsr_bits
) & (GSR_PCR
| GSR_SCR
))) {
128 printk(KERN_INFO
"%s: cold reset timeout (GSR=%#lx)\n",
129 __FUNCTION__
, gsr_bits
);
131 /* let's try warm reset */
134 /* warm reset broken on Bulverde,
135 so manually keep AC97 reset high */
136 pxa_gpio_mode(113 | GPIO_OUT
| GPIO_DFLT_HIGH
);
139 pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT
);
142 GCR
|= GCR_WARM_RST
|GCR_PRIRDY_IEN
|GCR_SECRDY_IEN
;
143 wait_event_timeout(gsr_wq
, gsr_bits
& (GSR_PCR
| GSR_SCR
), 1);
146 if (!((GSR
| gsr_bits
) & (GSR_PCR
| GSR_SCR
)))
147 printk(KERN_INFO
"%s: warm reset timeout (GSR=%#lx)\n",
148 __FUNCTION__
, gsr_bits
);
151 GCR
&= ~(GCR_PRIRDY_IEN
|GCR_SECRDY_IEN
);
152 GCR
|= GCR_SDONE_IE
|GCR_CDONE_IE
;
155 static irqreturn_t
pxa2xx_ac97_irq(int irq
, void *dev_id
)
166 /* Although we don't use those we still need to clear them
167 since they tend to spuriously trigger when MMC is used
168 (hardware bug? go figure)... */
180 static struct snd_ac97_bus_ops pxa2xx_ac97_ops
= {
181 .read
= pxa2xx_ac97_read
,
182 .write
= pxa2xx_ac97_write
,
183 .reset
= pxa2xx_ac97_reset
,
186 static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_out
= {
187 .name
= "AC97 PCM out",
188 .dev_addr
= __PREG(PCDR
),
189 .drcmr
= &DRCMRTXPCDR
,
190 .dcmd
= DCMD_INCSRCADDR
| DCMD_FLOWTRG
|
191 DCMD_BURST32
| DCMD_WIDTH4
,
194 static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_in
= {
195 .name
= "AC97 PCM in",
196 .dev_addr
= __PREG(PCDR
),
197 .drcmr
= &DRCMRRXPCDR
,
198 .dcmd
= DCMD_INCTRGADDR
| DCMD_FLOWSRC
|
199 DCMD_BURST32
| DCMD_WIDTH4
,
202 static struct snd_pcm
*pxa2xx_ac97_pcm
;
203 static struct snd_ac97
*pxa2xx_ac97_ac97
;
205 static int pxa2xx_ac97_pcm_startup(struct snd_pcm_substream
*substream
)
207 struct snd_pcm_runtime
*runtime
= substream
->runtime
;
208 pxa2xx_audio_ops_t
*platform_ops
;
211 runtime
->hw
.channels_min
= 2;
212 runtime
->hw
.channels_max
= 2;
214 r
= (substream
->stream
== SNDRV_PCM_STREAM_PLAYBACK
) ?
215 AC97_RATES_FRONT_DAC
: AC97_RATES_ADC
;
216 runtime
->hw
.rates
= pxa2xx_ac97_ac97
->rates
[r
];
217 snd_pcm_limit_hw_rates(runtime
);
219 platform_ops
= substream
->pcm
->card
->dev
->platform_data
;
220 if (platform_ops
&& platform_ops
->startup
)
221 return platform_ops
->startup(substream
, platform_ops
->priv
);
226 static void pxa2xx_ac97_pcm_shutdown(struct snd_pcm_substream
*substream
)
228 pxa2xx_audio_ops_t
*platform_ops
;
230 platform_ops
= substream
->pcm
->card
->dev
->platform_data
;
231 if (platform_ops
&& platform_ops
->shutdown
)
232 platform_ops
->shutdown(substream
, platform_ops
->priv
);
235 static int pxa2xx_ac97_pcm_prepare(struct snd_pcm_substream
*substream
)
237 struct snd_pcm_runtime
*runtime
= substream
->runtime
;
238 int reg
= (substream
->stream
== SNDRV_PCM_STREAM_PLAYBACK
) ?
239 AC97_PCM_FRONT_DAC_RATE
: AC97_PCM_LR_ADC_RATE
;
240 return snd_ac97_set_rate(pxa2xx_ac97_ac97
, reg
, runtime
->rate
);
243 static struct pxa2xx_pcm_client pxa2xx_ac97_pcm_client
= {
244 .playback_params
= &pxa2xx_ac97_pcm_out
,
245 .capture_params
= &pxa2xx_ac97_pcm_in
,
246 .startup
= pxa2xx_ac97_pcm_startup
,
247 .shutdown
= pxa2xx_ac97_pcm_shutdown
,
248 .prepare
= pxa2xx_ac97_pcm_prepare
,
253 static int pxa2xx_ac97_do_suspend(struct snd_card
*card
, pm_message_t state
)
255 pxa2xx_audio_ops_t
*platform_ops
= card
->dev
->platform_data
;
257 snd_power_change_state(card
, SNDRV_CTL_POWER_D3cold
);
258 snd_pcm_suspend_all(pxa2xx_ac97_pcm
);
259 snd_ac97_suspend(pxa2xx_ac97_ac97
);
260 if (platform_ops
&& platform_ops
->suspend
)
261 platform_ops
->suspend(platform_ops
->priv
);
262 GCR
|= GCR_ACLINK_OFF
;
263 pxa_set_cken(CKEN2_AC97
, 0);
268 static int pxa2xx_ac97_do_resume(struct snd_card
*card
)
270 pxa2xx_audio_ops_t
*platform_ops
= card
->dev
->platform_data
;
272 pxa_set_cken(CKEN2_AC97
, 1);
273 if (platform_ops
&& platform_ops
->resume
)
274 platform_ops
->resume(platform_ops
->priv
);
275 snd_ac97_resume(pxa2xx_ac97_ac97
);
276 snd_power_change_state(card
, SNDRV_CTL_POWER_D0
);
281 static int pxa2xx_ac97_suspend(struct platform_device
*dev
, pm_message_t state
)
283 struct snd_card
*card
= platform_get_drvdata(dev
);
287 ret
= pxa2xx_ac97_do_suspend(card
, PMSG_SUSPEND
);
292 static int pxa2xx_ac97_resume(struct platform_device
*dev
)
294 struct snd_card
*card
= platform_get_drvdata(dev
);
298 ret
= pxa2xx_ac97_do_resume(card
);
304 #define pxa2xx_ac97_suspend NULL
305 #define pxa2xx_ac97_resume NULL
308 static int __devinit
pxa2xx_ac97_probe(struct platform_device
*dev
)
310 struct snd_card
*card
;
311 struct snd_ac97_bus
*ac97_bus
;
312 struct snd_ac97_template ac97_template
;
316 card
= snd_card_new(SNDRV_DEFAULT_IDX1
, SNDRV_DEFAULT_STR1
,
321 card
->dev
= &dev
->dev
;
322 strncpy(card
->driver
, dev
->dev
.driver
->name
, sizeof(card
->driver
));
324 ret
= pxa2xx_pcm_new(card
, &pxa2xx_ac97_pcm_client
, &pxa2xx_ac97_pcm
);
328 ret
= request_irq(IRQ_AC97
, pxa2xx_ac97_irq
, 0, "AC97", NULL
);
332 pxa_gpio_mode(GPIO31_SYNC_AC97_MD
);
333 pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD
);
334 pxa_gpio_mode(GPIO28_BITCLK_AC97_MD
);
335 pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD
);
337 /* Use GPIO 113 as AC97 Reset on Bulverde */
338 pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT
);
340 pxa_set_cken(CKEN2_AC97
, 1);
342 ret
= snd_ac97_bus(card
, 0, &pxa2xx_ac97_ops
, NULL
, &ac97_bus
);
345 memset(&ac97_template
, 0, sizeof(ac97_template
));
346 ret
= snd_ac97_mixer(ac97_bus
, &ac97_template
, &pxa2xx_ac97_ac97
);
350 snprintf(card
->shortname
, sizeof(card
->shortname
),
351 "%s", snd_ac97_get_short_name(pxa2xx_ac97_ac97
));
352 snprintf(card
->longname
, sizeof(card
->longname
),
353 "%s (%s)", dev
->dev
.driver
->name
, card
->mixername
);
355 ret
= snd_card_register(card
);
357 platform_set_drvdata(dev
, card
);
364 if (CKEN
& CKEN2_AC97
) {
365 GCR
|= GCR_ACLINK_OFF
;
366 free_irq(IRQ_AC97
, NULL
);
367 pxa_set_cken(CKEN2_AC97
, 0);
372 static int __devexit
pxa2xx_ac97_remove(struct platform_device
*dev
)
374 struct snd_card
*card
= platform_get_drvdata(dev
);
378 platform_set_drvdata(dev
, NULL
);
379 GCR
|= GCR_ACLINK_OFF
;
380 free_irq(IRQ_AC97
, NULL
);
381 pxa_set_cken(CKEN2_AC97
, 0);
387 static struct platform_driver pxa2xx_ac97_driver
= {
388 .probe
= pxa2xx_ac97_probe
,
389 .remove
= __devexit_p(pxa2xx_ac97_remove
),
390 .suspend
= pxa2xx_ac97_suspend
,
391 .resume
= pxa2xx_ac97_resume
,
393 .name
= "pxa2xx-ac97",
397 static int __init
pxa2xx_ac97_init(void)
399 return platform_driver_register(&pxa2xx_ac97_driver
);
402 static void __exit
pxa2xx_ac97_exit(void)
404 platform_driver_unregister(&pxa2xx_ac97_driver
);
407 module_init(pxa2xx_ac97_init
);
408 module_exit(pxa2xx_ac97_exit
);
410 MODULE_AUTHOR("Nicolas Pitre");
411 MODULE_DESCRIPTION("AC97 driver for the Intel PXA2xx chip");
412 MODULE_LICENSE("GPL");