drivers/ata/pata_sil680.c

   1 /*
   2  * pata_sil680.c        - SIL680 PATA for new ATA layer
   3  *                        (C) 2005 Red Hat Inc
   4  *                        Alan Cox <alan@redhat.com>
   5  *
   6  * based upon
   7  *
   8  * linux/drivers/ide/pci/siimage.c              Version 1.07    Nov 30, 2003
   9  *
  10  * Copyright (C) 2001-2002      Andre Hedrick <andre@linux-ide.org>
  11  * Copyright (C) 2003           Red Hat <alan@redhat.com>
  12  *
  13  *  May be copied or modified under the terms of the GNU General Public License
  14  *
  15  *  Documentation publically available.
  16  *
  17  *      If you have strange problems with nVidia chipset systems please
  18  *      see the SI support documentation and update your system BIOS
  19  *      if neccessary
  20  *
  21  * TODO
  22  *      If we know all our devices are LBA28 (or LBA28 sized)  we could use
  23  *      the command fifo mode.
  24  */
  25
  26 #include <linux/kernel.h>
  27 #include <linux/module.h>
  28 #include <linux/pci.h>
  29 #include <linux/init.h>
  30 #include <linux/blkdev.h>
  31 #include <linux/delay.h>
  32 #include <scsi/scsi_host.h>
  33 #include <linux/libata.h>
  34
  35 #define DRV_NAME "pata_sil680"
  36 #define DRV_VERSION "0.4.6"
  37
  38 #define SIL680_MMIO_BAR         5
  39
  40 /**
  41  *      sil680_selreg           -       return register base
  42  *      @hwif: interface
  43  *      @r: config offset
  44  *
  45  *      Turn a config register offset into the right address in either
  46  *      PCI space or MMIO space to access the control register in question
  47  *      Thankfully this is a configuration operation so isnt performance
  48  *      criticial.
  49  */
  50
  51 static unsigned long sil680_selreg(struct ata_port *ap, int r)
  52 {
  53         unsigned long base = 0xA0 + r;
  54         base += (ap->port_no << 4);
  55         return base;
  56 }
  57
  58 /**
  59  *      sil680_seldev           -       return register base
  60  *      @hwif: interface
  61  *      @r: config offset
  62  *
  63  *      Turn a config register offset into the right address in either
  64  *      PCI space or MMIO space to access the control register in question
  65  *      including accounting for the unit shift.
  66  */
  67
  68 static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
  69 {
  70         unsigned long base = 0xA0 + r;
  71         base += (ap->port_no << 4);
  72         base |= adev->devno ? 2 : 0;
  73         return base;
  74 }
  75
  76
  77 /**
  78  *      sil680_cable_detect     -       cable detection
  79  *      @ap: ATA port
  80  *
  81  *      Perform cable detection. The SIL680 stores this in PCI config
  82  *      space for us.
  83  */
  84
  85 static int sil680_cable_detect(struct ata_port *ap) {
  86         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
  87         unsigned long addr = sil680_selreg(ap, 0);
  88         u8 ata66;
  89         pci_read_config_byte(pdev, addr, &ata66);
  90         if (ata66 & 1)
  91                 return ATA_CBL_PATA80;
  92         else
  93                 return ATA_CBL_PATA40;
  94 }
  95
  96 /**
  97  *      sil680_bus_reset        -       reset the SIL680 bus
  98  *      @ap: ATA port to reset
  99  *      @deadline: deadline jiffies for the operation
 100  *
 101  *      Perform the SIL680 housekeeping when doing an ATA bus reset
 102  */
 103
 104 static int sil680_bus_reset(struct ata_port *ap,unsigned int *classes,
 105                             unsigned long deadline)
 106 {
 107         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 108         unsigned long addr = sil680_selreg(ap, 0);
 109         u8 reset;
 110
 111         pci_read_config_byte(pdev, addr, &reset);
 112         pci_write_config_byte(pdev, addr, reset | 0x03);
 113         udelay(25);
 114         pci_write_config_byte(pdev, addr, reset);
 115         return ata_std_softreset(ap, classes, deadline);
 116 }
 117
 118 static void sil680_error_handler(struct ata_port *ap)
 119 {
 120         ata_bmdma_drive_eh(ap, ata_std_prereset, sil680_bus_reset, NULL, ata_std_postreset);
 121 }
 122
 123 /**
 124  *      sil680_set_piomode      -       set initial PIO mode data
 125  *      @ap: ATA interface
 126  *      @adev: ATA device
 127  *
 128  *      Program the SIL680 registers for PIO mode. Note that the task speed
 129  *      registers are shared between the devices so we must pick the lowest
 130  *      mode for command work.
 131  */
 132
 133 static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
 134 {
 135         static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 };
 136         static u16 speed_t[5] = { 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 };
 137
 138         unsigned long tfaddr = sil680_selreg(ap, 0x02);
 139         unsigned long addr = sil680_seldev(ap, adev, 0x04);
 140         unsigned long addr_mask = 0x80 + 4 * ap->port_no;
 141         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 142         int pio = adev->pio_mode - XFER_PIO_0;
 143         int lowest_pio = pio;
 144         int port_shift = 4 * adev->devno;
 145         u16 reg;
 146         u8 mode;
 147
 148         struct ata_device *pair = ata_dev_pair(adev);
 149
 150         if (pair != NULL && adev->pio_mode > pair->pio_mode)
 151                 lowest_pio = pair->pio_mode - XFER_PIO_0;
 152
 153         pci_write_config_word(pdev, addr, speed_p[pio]);
 154         pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]);
 155
 156         pci_read_config_word(pdev, tfaddr-2, &reg);
 157         pci_read_config_byte(pdev, addr_mask, &mode);
 158
 159         reg &= ~0x0200;                 /* Clear IORDY */
 160         mode &= ~(3 << port_shift);     /* Clear IORDY and DMA bits */
 161
 162         if (ata_pio_need_iordy(adev)) {
 163                 reg |= 0x0200;          /* Enable IORDY */
 164                 mode |= 1 << port_shift;
 165         }
 166         pci_write_config_word(pdev, tfaddr-2, reg);
 167         pci_write_config_byte(pdev, addr_mask, mode);
 168 }
 169
 170 /**
 171  *      sil680_set_dmamode      -       set initial DMA mode data
 172  *      @ap: ATA interface
 173  *      @adev: ATA device
 174  *
 175  *      Program the MWDMA/UDMA modes for the sil680 k
 176  *      chipset. The MWDMA mode values are pulled from a lookup table
 177  *      while the chipset uses mode number for UDMA.
 178  */
 179
 180 static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 181 {
 182         static u8 ultra_table[2][7] = {
 183                 { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF },   /* 100MHz */
 184                 { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 },   /* 133Mhz */
 185         };
 186         static u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
 187
 188         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 189         unsigned long ma = sil680_seldev(ap, adev, 0x08);
 190         unsigned long ua = sil680_seldev(ap, adev, 0x0C);
 191         unsigned long addr_mask = 0x80 + 4 * ap->port_no;
 192         int port_shift = adev->devno * 4;
 193         u8 scsc, mode;
 194         u16 multi, ultra;
 195
 196         pci_read_config_byte(pdev, 0x8A, &scsc);
 197         pci_read_config_byte(pdev, addr_mask, &mode);
 198         pci_read_config_word(pdev, ma, &multi);
 199         pci_read_config_word(pdev, ua, &ultra);
 200
 201         /* Mask timing bits */
 202         ultra &= ~0x3F;
 203         mode &= ~(0x03 << port_shift);
 204
 205         /* Extract scsc */
 206         scsc = (scsc & 0x30) ? 1: 0;
 207
 208         if (adev->dma_mode >= XFER_UDMA_0) {
 209                 multi = 0x10C1;
 210                 ultra |= ultra_table[scsc][adev->dma_mode - XFER_UDMA_0];
 211                 mode |= (0x03 << port_shift);
 212         } else {
 213                 multi = dma_table[adev->dma_mode - XFER_MW_DMA_0];
 214                 mode |= (0x02 << port_shift);
 215         }
 216         pci_write_config_byte(pdev, addr_mask, mode);
 217         pci_write_config_word(pdev, ma, multi);
 218         pci_write_config_word(pdev, ua, ultra);
 219 }
 220
 221 static struct scsi_host_template sil680_sht = {
 222         .module                 = THIS_MODULE,
 223         .name                   = DRV_NAME,
 224         .ioctl                  = ata_scsi_ioctl,
 225         .queuecommand           = ata_scsi_queuecmd,
 226         .can_queue              = ATA_DEF_QUEUE,
 227         .this_id                = ATA_SHT_THIS_ID,
 228         .sg_tablesize           = LIBATA_MAX_PRD,
 229         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
 230         .emulated               = ATA_SHT_EMULATED,
 231         .use_clustering         = ATA_SHT_USE_CLUSTERING,
 232         .proc_name              = DRV_NAME,
 233         .dma_boundary           = ATA_DMA_BOUNDARY,
 234         .slave_configure        = ata_scsi_slave_config,
 235         .slave_destroy          = ata_scsi_slave_destroy,
 236         .bios_param             = ata_std_bios_param,
 237 };
 238
 239 static struct ata_port_operations sil680_port_ops = {
 240         .port_disable   = ata_port_disable,
 241         .set_piomode    = sil680_set_piomode,
 242         .set_dmamode    = sil680_set_dmamode,
 243         .mode_filter    = ata_pci_default_filter,
 244         .tf_load        = ata_tf_load,
 245         .tf_read        = ata_tf_read,
 246         .check_status   = ata_check_status,
 247         .exec_command   = ata_exec_command,
 248         .dev_select     = ata_std_dev_select,
 249
 250         .freeze         = ata_bmdma_freeze,
 251         .thaw           = ata_bmdma_thaw,
 252         .error_handler  = sil680_error_handler,
 253         .post_internal_cmd = ata_bmdma_post_internal_cmd,
 254         .cable_detect   = sil680_cable_detect,
 255
 256         .bmdma_setup    = ata_bmdma_setup,
 257         .bmdma_start    = ata_bmdma_start,
 258         .bmdma_stop     = ata_bmdma_stop,
 259         .bmdma_status   = ata_bmdma_status,
 260
 261         .qc_prep        = ata_qc_prep,
 262         .qc_issue       = ata_qc_issue_prot,
 263
 264         .data_xfer      = ata_data_xfer,
 265
 266         .irq_handler    = ata_interrupt,
 267         .irq_clear      = ata_bmdma_irq_clear,
 268         .irq_on         = ata_irq_on,
 269         .irq_ack        = ata_irq_ack,
 270
 271         .port_start     = ata_port_start,
 272 };
 273
 274 /**
 275  *      sil680_init_chip                -       chip setup
 276  *      @pdev: PCI device
 277  *
 278  *      Perform all the chip setup which must be done both when the device
 279  *      is powered up on boot and when we resume in case we resumed from RAM.
 280  *      Returns the final clock settings.
 281  */
 282
 283 static u8 sil680_init_chip(struct pci_dev *pdev)
 284 {
 285         u32 class_rev   = 0;
 286         u8 tmpbyte      = 0;
 287
 288         pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
 289         class_rev &= 0xff;
 290         /* FIXME: double check */
 291         pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255);
 292
 293         pci_write_config_byte(pdev, 0x80, 0x00);
 294         pci_write_config_byte(pdev, 0x84, 0x00);
 295
 296         pci_read_config_byte(pdev, 0x8A, &tmpbyte);
 297
 298         dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
 299                 tmpbyte & 1, tmpbyte & 0x30);
 300
 301         switch(tmpbyte & 0x30) {
 302                 case 0x00:
 303                         /* 133 clock attempt to force it on */
 304                         pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
 305                         break;
 306                 case 0x30:
 307                         /* if clocking is disabled */
 308                         /* 133 clock attempt to force it on */
 309                         pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
 310                         break;
 311                 case 0x10:
 312                         /* 133 already */
 313                         break;
 314                 case 0x20:
 315                         /* BIOS set PCI x2 clocking */
 316                         break;
 317         }
 318
 319         pci_read_config_byte(pdev,   0x8A, &tmpbyte);
 320         dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
 321                 tmpbyte & 1, tmpbyte & 0x30);
 322
 323         pci_write_config_byte(pdev,  0xA1, 0x72);
 324         pci_write_config_word(pdev,  0xA2, 0x328A);
 325         pci_write_config_dword(pdev, 0xA4, 0x62DD62DD);
 326         pci_write_config_dword(pdev, 0xA8, 0x43924392);
 327         pci_write_config_dword(pdev, 0xAC, 0x40094009);
 328         pci_write_config_byte(pdev,  0xB1, 0x72);
 329         pci_write_config_word(pdev,  0xB2, 0x328A);
 330         pci_write_config_dword(pdev, 0xB4, 0x62DD62DD);
 331         pci_write_config_dword(pdev, 0xB8, 0x43924392);
 332         pci_write_config_dword(pdev, 0xBC, 0x40094009);
 333
 334         switch(tmpbyte & 0x30) {
 335                 case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break;
 336                 case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break;
 337                 case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break;
 338                 /* This last case is _NOT_ ok */
 339                 case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n");
 340         }
 341         return tmpbyte & 0x30;
 342 }
 343
 344 static int __devinit sil680_init_one(struct pci_dev *pdev,
 345                                      const struct pci_device_id *id)
 346 {
 347         static const struct ata_port_info info = {
 348                 .sht = &sil680_sht,
 349                 .flags = ATA_FLAG_SLAVE_POSS,
 350                 .pio_mask = 0x1f,
 351                 .mwdma_mask = 0x07,
 352                 .udma_mask = ATA_UDMA6,
 353                 .port_ops = &sil680_port_ops
 354         };
 355         static const struct ata_port_info info_slow = {
 356                 .sht = &sil680_sht,
 357                 .flags = ATA_FLAG_SLAVE_POSS,
 358                 .pio_mask = 0x1f,
 359                 .mwdma_mask = 0x07,
 360                 .udma_mask = ATA_UDMA5,
 361                 .port_ops = &sil680_port_ops
 362         };
 363         const struct ata_port_info *ppi[] = { &info, NULL };
 364         static int printed_version;
 365
 366         if (!printed_version++)
 367                 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 368
 369         switch(sil680_init_chip(pdev))
 370         {
 371                 case 0:
 372                         ppi[0] = &info_slow;
 373                         break;
 374                 case 0x30:
 375                         return -ENODEV;
 376         }
 377         return ata_pci_init_one(pdev, ppi);
 378 }
 379
 380 #ifdef CONFIG_PM
 381 static int sil680_reinit_one(struct pci_dev *pdev)
 382 {
 383         sil680_init_chip(pdev);
 384         return ata_pci_device_resume(pdev);
 385 }
 386 #endif
 387
 388 static const struct pci_device_id sil680[] = {
 389         { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), },
 390
 391         { },
 392 };
 393
 394 static struct pci_driver sil680_pci_driver = {
 395         .name           = DRV_NAME,
 396         .id_table       = sil680,
 397         .probe          = sil680_init_one,
 398         .remove         = ata_pci_remove_one,
 399 #ifdef CONFIG_PM
 400         .suspend        = ata_pci_device_suspend,
 401         .resume         = sil680_reinit_one,
 402 #endif
 403 };
 404
 405 static int __init sil680_init(void)
 406 {
 407         return pci_register_driver(&sil680_pci_driver);
 408 }
 409
 410 static void __exit sil680_exit(void)
 411 {
 412         pci_unregister_driver(&sil680_pci_driver);
 413 }
 414
 415 MODULE_AUTHOR("Alan Cox");
 416 MODULE_DESCRIPTION("low-level driver for SI680 PATA");
 417 MODULE_LICENSE("GPL");
 418 MODULE_DEVICE_TABLE(pci, sil680);
 419 MODULE_VERSION(DRV_VERSION);
 420
 421 module_init(sil680_init);
 422 module_exit(sil680_exit);