?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Complete the renaming to TuxOnIce with function names, vars etc.
[linux-2.6/suspend2-head.git] / drivers / net / 8139too.c
blob327eaa7b4999183dee5ad600dc56b29efbbed787
1 /*
2
3 8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
4
5 Maintained by Jeff Garzik <jgarzik@pobox.com>
6 Copyright 2000-2002 Jeff Garzik
7
8 Much code comes from Donald Becker's rtl8139.c driver,
9 versions 1.13 and older. This driver was originally based
10 on rtl8139.c version 1.07. Header of rtl8139.c version 1.13:
11
12 -----<snip>-----
13
14 Written 1997-2001 by Donald Becker.
15 This software may be used and distributed according to the
16 terms of the GNU General Public License (GPL), incorporated
17 herein by reference. Drivers based on or derived from this
18 code fall under the GPL and must retain the authorship,
19 copyright and license notice. This file is not a complete
20 program and may only be used when the entire operating
21 system is licensed under the GPL.
22
23 This driver is for boards based on the RTL8129 and RTL8139
24 PCI ethernet chips.
25
26 The author may be reached as becker@scyld.com, or C/O Scyld
27 Computing Corporation 410 Severn Ave., Suite 210 Annapolis
28 MD 21403
29
30 Support and updates available at
31 http://www.scyld.com/network/rtl8139.html
32
33 Twister-tuning table provided by Kinston
34 <shangh@realtek.com.tw>.
35
36 -----<snip>-----
37
38 This software may be used and distributed according to the terms
39 of the GNU General Public License, incorporated herein by reference.
40
41 Contributors:
42
43 Donald Becker - he wrote the original driver, kudos to him!
44 (but please don't e-mail him for support, this isn't his driver)
45
46 Tigran Aivazian - bug fixes, skbuff free cleanup
47
48 Martin Mares - suggestions for PCI cleanup
49
50 David S. Miller - PCI DMA and softnet updates
51
52 Ernst Gill - fixes ported from BSD driver
53
54 Daniel Kobras - identified specific locations of
55 posted MMIO write bugginess
56
57 Gerard Sharp - bug fix, testing and feedback
58
59 David Ford - Rx ring wrap fix
60
61 Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
62 to find and fix a crucial bug on older chipsets.
63
64 Donald Becker/Chris Butterworth/Marcus Westergren -
65 Noticed various Rx packet size-related buglets.
66
67 Santiago Garcia Mantinan - testing and feedback
68
69 Jens David - 2.2.x kernel backports
70
71 Martin Dennett - incredibly helpful insight on undocumented
72 features of the 8139 chips
73
74 Jean-Jacques Michel - bug fix
75
76 Tobias Ringström - Rx interrupt status checking suggestion
77
78 Andrew Morton - Clear blocked signals, avoid
79 buffer overrun setting current->comm.
80
81 Kalle Olavi Niemitalo - Wake-on-LAN ioctls
82
83 Robert Kuebel - Save kernel thread from dying on any signal.
84
85 Submitting bug reports:
86
87 "rtl8139-diag -mmmaaavvveefN" output
88 enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
89
90 */
91
92 #define DRV_NAME "8139too"
93 #define DRV_VERSION "0.9.28"
94
95
96 #include <linux/module.h>
97 #include <linux/kernel.h>
98 #include <linux/compiler.h>
99 #include <linux/pci.h>
100 #include <linux/init.h>
101 #include <linux/ioport.h>
102 #include <linux/netdevice.h>
103 #include <linux/etherdevice.h>
104 #include <linux/rtnetlink.h>
105 #include <linux/delay.h>
106 #include <linux/ethtool.h>
107 #include <linux/mii.h>
108 #include <linux/completion.h>
109 #include <linux/crc32.h>
110 #include <asm/io.h>
111 #include <asm/uaccess.h>
112 #include <asm/irq.h>
113
114 #define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
115 #define PFX DRV_NAME ": "
116
117 /* Default Message level */
118 #define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
119 NETIF_MSG_PROBE | \
120 NETIF_MSG_LINK)
121
122
123 /* enable PIO instead of MMIO, if CONFIG_8139TOO_PIO is selected */
124 #ifdef CONFIG_8139TOO_PIO
125 #define USE_IO_OPS 1
126 #endif
127
128 /* define to 1, 2 or 3 to enable copious debugging info */
129 #define RTL8139_DEBUG 0
130
131 /* define to 1 to disable lightweight runtime debugging checks */
132 #undef RTL8139_NDEBUG
133
134
135 #if RTL8139_DEBUG
136 /* note: prints function name for you */
137 # define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)
138 #else
139 # define DPRINTK(fmt, args...)
140 #endif
141
142 #ifdef RTL8139_NDEBUG
143 # define assert(expr) do {} while (0)
144 #else
145 # define assert(expr) \
146 if(unlikely(!(expr))) { \
147 printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \
148 #expr,__FILE__,__FUNCTION__,__LINE__); \
149 }
150 #endif
151
152
153 /* A few user-configurable values. */
154 /* media options */
155 #define MAX_UNITS 8
156 static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
157 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
158
159 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
160 The RTL chips use a 64 element hash table based on the Ethernet CRC. */
161 static int multicast_filter_limit = 32;
162
163 /* bitmapped message enable number */
164 static int debug = -1;
165
166 /*
167 * Receive ring size
168 * Warning: 64K ring has hardware issues and may lock up.
169 */
170 #if defined(CONFIG_SH_DREAMCAST)
171 #define RX_BUF_IDX 1 /* 16K ring */
172 #else
173 #define RX_BUF_IDX 2 /* 32K ring */
174 #endif
175 #define RX_BUF_LEN (8192 << RX_BUF_IDX)
176 #define RX_BUF_PAD 16
177 #define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
178
179 #if RX_BUF_LEN == 65536
180 #define RX_BUF_TOT_LEN RX_BUF_LEN
181 #else
182 #define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
183 #endif
184
185 /* Number of Tx descriptor registers. */
186 #define NUM_TX_DESC 4
187
188 /* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
189 #define MAX_ETH_FRAME_SIZE 1536
190
191 /* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
192 #define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
193 #define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
194
195 /* PCI Tuning Parameters
196 Threshold is bytes transferred to chip before transmission starts. */
197 #define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
198
199 /* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
200 #define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
201 #define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */
202 #define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
203 #define TX_RETRY 8 /* 0-15. retries = 16 + (TX_RETRY * 16) */
204
205 /* Operational parameters that usually are not changed. */
206 /* Time in jiffies before concluding the transmitter is hung. */
207 #define TX_TIMEOUT (6*HZ)
208
209
210 enum {
211 HAS_MII_XCVR = 0x010000,
212 HAS_CHIP_XCVR = 0x020000,
213 HAS_LNK_CHNG = 0x040000,
214 };
215
216 #define RTL_NUM_STATS 4 /* number of ETHTOOL_GSTATS u64's */
217 #define RTL_REGS_VER 1 /* version of reg. data in ETHTOOL_GREGS */
218 #define RTL_MIN_IO_SIZE 0x80
219 #define RTL8139B_IO_SIZE 256
220
221 #define RTL8129_CAPS HAS_MII_XCVR
222 #define RTL8139_CAPS HAS_CHIP_XCVR|HAS_LNK_CHNG
223
224 typedef enum {
225 RTL8139 = 0,
226 RTL8129,
227 } board_t;
228
229
230 /* indexed by board_t, above */
231 static const struct {
232 const char *name;
233 u32 hw_flags;
234 } board_info[] __devinitdata = {
235 { "RealTek RTL8139", RTL8139_CAPS },
236 { "RealTek RTL8129", RTL8129_CAPS },
237 };
238
239
240 static struct pci_device_id rtl8139_pci_tbl[] = {
241 {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
242 {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
243 {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
244 {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
245 {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
246 {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
247 {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
248 {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
249 {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
250 {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
251 {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
252 {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
253 {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
254 {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
255 {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
256 {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
257 {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
258 {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
259 {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
260
261 #ifdef CONFIG_SH_SECUREEDGE5410
262 /* Bogus 8139 silicon reports 8129 without external PROM :-( */
263 {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
264 #endif
265 #ifdef CONFIG_8139TOO_8129
266 {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
267 #endif
268
269 /* some crazy cards report invalid vendor ids like
270 * 0x0001 here. The other ids are valid and constant,
271 * so we simply don't match on the main vendor id.
272 */
273 {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
274 {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
275 {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
276
277 {0,}
278 };
279 MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
280
281 static struct {
282 const char str[ETH_GSTRING_LEN];
283 } ethtool_stats_keys[] = {
284 { "early_rx" },
285 { "tx_buf_mapped" },
286 { "tx_timeouts" },
287 { "rx_lost_in_ring" },
288 };
289
290 /* The rest of these values should never change. */
291
292 /* Symbolic offsets to registers. */
293 enum RTL8139_registers {
294 MAC0 = 0, /* Ethernet hardware address. */
295 MAR0 = 8, /* Multicast filter. */
296 TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */
297 TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */
298 RxBuf = 0x30,
299 ChipCmd = 0x37,
300 RxBufPtr = 0x38,
301 RxBufAddr = 0x3A,
302 IntrMask = 0x3C,
303 IntrStatus = 0x3E,
304 TxConfig = 0x40,
305 RxConfig = 0x44,
306 Timer = 0x48, /* A general-purpose counter. */
307 RxMissed = 0x4C, /* 24 bits valid, write clears. */
308 Cfg9346 = 0x50,
309 Config0 = 0x51,
310 Config1 = 0x52,
311 FlashReg = 0x54,
312 MediaStatus = 0x58,
313 Config3 = 0x59,
314 Config4 = 0x5A, /* absent on RTL-8139A */
315 HltClk = 0x5B,
316 MultiIntr = 0x5C,
317 TxSummary = 0x60,
318 BasicModeCtrl = 0x62,
319 BasicModeStatus = 0x64,
320 NWayAdvert = 0x66,
321 NWayLPAR = 0x68,
322 NWayExpansion = 0x6A,
323 /* Undocumented registers, but required for proper operation. */
324 FIFOTMS = 0x70, /* FIFO Control and test. */
325 CSCR = 0x74, /* Chip Status and Configuration Register. */
326 PARA78 = 0x78,
327 PARA7c = 0x7c, /* Magic transceiver parameter register. */
328 Config5 = 0xD8, /* absent on RTL-8139A */
329 };
330
331 enum ClearBitMasks {
332 MultiIntrClear = 0xF000,
333 ChipCmdClear = 0xE2,
334 Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
335 };
336
337 enum ChipCmdBits {
338 CmdReset = 0x10,
339 CmdRxEnb = 0x08,
340 CmdTxEnb = 0x04,
341 RxBufEmpty = 0x01,
342 };
343
344 /* Interrupt register bits, using my own meaningful names. */
345 enum IntrStatusBits {
346 PCIErr = 0x8000,
347 PCSTimeout = 0x4000,
348 RxFIFOOver = 0x40,
349 RxUnderrun = 0x20,
350 RxOverflow = 0x10,
351 TxErr = 0x08,
352 TxOK = 0x04,
353 RxErr = 0x02,
354 RxOK = 0x01,
355
356 RxAckBits = RxFIFOOver | RxOverflow | RxOK,
357 };
358
359 enum TxStatusBits {
360 TxHostOwns = 0x2000,
361 TxUnderrun = 0x4000,
362 TxStatOK = 0x8000,
363 TxOutOfWindow = 0x20000000,
364 TxAborted = 0x40000000,
365 TxCarrierLost = 0x80000000,
366 };
367 enum RxStatusBits {
368 RxMulticast = 0x8000,
369 RxPhysical = 0x4000,
370 RxBroadcast = 0x2000,
371 RxBadSymbol = 0x0020,
372 RxRunt = 0x0010,
373 RxTooLong = 0x0008,
374 RxCRCErr = 0x0004,
375 RxBadAlign = 0x0002,
376 RxStatusOK = 0x0001,
377 };
378
379 /* Bits in RxConfig. */
380 enum rx_mode_bits {
381 AcceptErr = 0x20,
382 AcceptRunt = 0x10,
383 AcceptBroadcast = 0x08,
384 AcceptMulticast = 0x04,
385 AcceptMyPhys = 0x02,
386 AcceptAllPhys = 0x01,
387 };
388
389 /* Bits in TxConfig. */
390 enum tx_config_bits {
391
392 /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
393 TxIFGShift = 24,
394 TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
395 TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
396 TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
397 TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
398
399 TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
400 TxCRC = (1 << 16), /* DISABLE appending CRC to end of Tx packets */
401 TxClearAbt = (1 << 0), /* Clear abort (WO) */
402 TxDMAShift = 8, /* DMA burst value (0-7) is shifted this many bits */
403 TxRetryShift = 4, /* TXRR value (0-15) is shifted this many bits */
404
405 TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
406 };
407
408 /* Bits in Config1 */
409 enum Config1Bits {
410 Cfg1_PM_Enable = 0x01,
411 Cfg1_VPD_Enable = 0x02,
412 Cfg1_PIO = 0x04,
413 Cfg1_MMIO = 0x08,
414 LWAKE = 0x10, /* not on 8139, 8139A */
415 Cfg1_Driver_Load = 0x20,
416 Cfg1_LED0 = 0x40,
417 Cfg1_LED1 = 0x80,
418 SLEEP = (1 << 1), /* only on 8139, 8139A */
419 PWRDN = (1 << 0), /* only on 8139, 8139A */
420 };
421
422 /* Bits in Config3 */
423 enum Config3Bits {
424 Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */
425 Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */
426 Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */
427 Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */
428 Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */
429 Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */
430 Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */
431 Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */
432 };
433
434 /* Bits in Config4 */
435 enum Config4Bits {
436 LWPTN = (1 << 2), /* not on 8139, 8139A */
437 };
438
439 /* Bits in Config5 */
440 enum Config5Bits {
441 Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */
442 Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */
443 Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */
444 Cfg5_FIFOAddrPtr = (1 << 3), /* Realtek internal SRAM testing */
445 Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */
446 Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */
447 Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */
448 };
449
450 enum RxConfigBits {
451 /* rx fifo threshold */
452 RxCfgFIFOShift = 13,
453 RxCfgFIFONone = (7 << RxCfgFIFOShift),
454
455 /* Max DMA burst */
456 RxCfgDMAShift = 8,
457 RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
458
459 /* rx ring buffer length */
460 RxCfgRcv8K = 0,
461 RxCfgRcv16K = (1 << 11),
462 RxCfgRcv32K = (1 << 12),
463 RxCfgRcv64K = (1 << 11) | (1 << 12),
464
465 /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
466 RxNoWrap = (1 << 7),
467 };
468
469 /* Twister tuning parameters from RealTek.
470 Completely undocumented, but required to tune bad links on some boards. */
471 enum CSCRBits {
472 CSCR_LinkOKBit = 0x0400,
473 CSCR_LinkChangeBit = 0x0800,
474 CSCR_LinkStatusBits = 0x0f000,
475 CSCR_LinkDownOffCmd = 0x003c0,
476 CSCR_LinkDownCmd = 0x0f3c0,
477 };
478
479 enum Cfg9346Bits {
480 Cfg9346_Lock = 0x00,
481 Cfg9346_Unlock = 0xC0,
482 };
483
484 typedef enum {
485 CH_8139 = 0,
486 CH_8139_K,
487 CH_8139A,
488 CH_8139A_G,
489 CH_8139B,
490 CH_8130,
491 CH_8139C,
492 CH_8100,
493 CH_8100B_8139D,
494 CH_8101,
495 } chip_t;
496
497 enum chip_flags {
498 HasHltClk = (1 << 0),
499 HasLWake = (1 << 1),
500 };
501
502 #define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
503 (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
504 #define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1)
505
506 /* directly indexed by chip_t, above */
507 static const struct {
508 const char *name;
509 u32 version; /* from RTL8139C/RTL8139D docs */
510 u32 flags;
511 } rtl_chip_info[] = {
512 { "RTL-8139",
513 HW_REVID(1, 0, 0, 0, 0, 0, 0),
514 HasHltClk,
515 },
516
517 { "RTL-8139 rev K",
518 HW_REVID(1, 1, 0, 0, 0, 0, 0),
519 HasHltClk,
520 },
521
522 { "RTL-8139A",
523 HW_REVID(1, 1, 1, 0, 0, 0, 0),
524 HasHltClk, /* XXX undocumented? */
525 },
526
527 { "RTL-8139A rev G",
528 HW_REVID(1, 1, 1, 0, 0, 1, 0),
529 HasHltClk, /* XXX undocumented? */
530 },
531
532 { "RTL-8139B",
533 HW_REVID(1, 1, 1, 1, 0, 0, 0),
534 HasLWake,
535 },
536
537 { "RTL-8130",
538 HW_REVID(1, 1, 1, 1, 1, 0, 0),
539 HasLWake,
540 },
541
542 { "RTL-8139C",
543 HW_REVID(1, 1, 1, 0, 1, 0, 0),
544 HasLWake,
545 },
546
547 { "RTL-8100",
548 HW_REVID(1, 1, 1, 1, 0, 1, 0),
549 HasLWake,
550 },
551
552 { "RTL-8100B/8139D",
553 HW_REVID(1, 1, 1, 0, 1, 0, 1),
554 HasHltClk /* XXX undocumented? */
555 | HasLWake,
556 },
557
558 { "RTL-8101",
559 HW_REVID(1, 1, 1, 0, 1, 1, 1),
560 HasLWake,
561 },
562 };
563
564 struct rtl_extra_stats {
565 unsigned long early_rx;
566 unsigned long tx_buf_mapped;
567 unsigned long tx_timeouts;
568 unsigned long rx_lost_in_ring;
569 };
570
571 struct rtl8139_private {
572 void __iomem *mmio_addr;
573 int drv_flags;
574 struct pci_dev *pci_dev;
575 u32 msg_enable;
576 struct net_device_stats stats;
577 unsigned char *rx_ring;
578 unsigned int cur_rx; /* Index into the Rx buffer of next Rx pkt. */
579 unsigned int tx_flag;
580 unsigned long cur_tx;
581 unsigned long dirty_tx;
582 unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
583 unsigned char *tx_bufs; /* Tx bounce buffer region. */
584 dma_addr_t rx_ring_dma;
585 dma_addr_t tx_bufs_dma;
586 signed char phys[4]; /* MII device addresses. */
587 char twistie, twist_row, twist_col; /* Twister tune state. */
588 unsigned int watchdog_fired : 1;
589 unsigned int default_port : 4; /* Last dev->if_port value. */
590 unsigned int have_thread : 1;
591 spinlock_t lock;
592 spinlock_t rx_lock;
593 chip_t chipset;
594 u32 rx_config;
595 struct rtl_extra_stats xstats;
596
597 struct delayed_work thread;
598
599 struct mii_if_info mii;
600 unsigned int regs_len;
601 unsigned long fifo_copy_timeout;
602 };
603
604 MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
605 MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver");
606 MODULE_LICENSE("GPL");
607 MODULE_VERSION(DRV_VERSION);
608
609 module_param(multicast_filter_limit, int, 0);
610 module_param_array(media, int, NULL, 0);
611 module_param_array(full_duplex, int, NULL, 0);
612 module_param(debug, int, 0);
613 MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
614 MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
615 MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
616 MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
617
618 static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
619 static int rtl8139_open (struct net_device *dev);
620 static int mdio_read (struct net_device *dev, int phy_id, int location);
621 static void mdio_write (struct net_device *dev, int phy_id, int location,
622 int val);
623 static void rtl8139_start_thread(struct rtl8139_private *tp);
624 static void rtl8139_tx_timeout (struct net_device *dev);
625 static void rtl8139_init_ring (struct net_device *dev);
626 static int rtl8139_start_xmit (struct sk_buff *skb,
627 struct net_device *dev);
628 static int rtl8139_poll(struct net_device *dev, int *budget);
629 #ifdef CONFIG_NET_POLL_CONTROLLER
630 static void rtl8139_poll_controller(struct net_device *dev);
631 #endif
632 static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
633 static int rtl8139_close (struct net_device *dev);
634 static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
635 static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
636 static void rtl8139_set_rx_mode (struct net_device *dev);
637 static void __set_rx_mode (struct net_device *dev);
638 static void rtl8139_hw_start (struct net_device *dev);
639 static void rtl8139_thread (struct work_struct *work);
640 static void rtl8139_tx_timeout_task(struct work_struct *work);
641 static const struct ethtool_ops rtl8139_ethtool_ops;
642
643 /* write MMIO register, with flush */
644 /* Flush avoids rtl8139 bug w/ posted MMIO writes */
645 #define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
646 #define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
647 #define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
648
649
650 #define MMIO_FLUSH_AUDIT_COMPLETE 1
651 #if MMIO_FLUSH_AUDIT_COMPLETE
652
653 /* write MMIO register */
654 #define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg))
655 #define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg))
656 #define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg))
657
658 #else
659
660 /* write MMIO register, then flush */
661 #define RTL_W8 RTL_W8_F
662 #define RTL_W16 RTL_W16_F
663 #define RTL_W32 RTL_W32_F
664
665 #endif /* MMIO_FLUSH_AUDIT_COMPLETE */
666
667 /* read MMIO register */
668 #define RTL_R8(reg) ioread8 (ioaddr + (reg))
669 #define RTL_R16(reg) ioread16 (ioaddr + (reg))
670 #define RTL_R32(reg) ((unsigned long) ioread32 (ioaddr + (reg)))
671
672
673 static const u16 rtl8139_intr_mask =
674 PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
675 TxErr | TxOK | RxErr | RxOK;
676
677 static const u16 rtl8139_norx_intr_mask =
678 PCIErr | PCSTimeout | RxUnderrun |
679 TxErr | TxOK | RxErr ;
680
681 #if RX_BUF_IDX == 0
682 static const unsigned int rtl8139_rx_config =
683 RxCfgRcv8K | RxNoWrap |
684 (RX_FIFO_THRESH << RxCfgFIFOShift) |
685 (RX_DMA_BURST << RxCfgDMAShift);
686 #elif RX_BUF_IDX == 1
687 static const unsigned int rtl8139_rx_config =
688 RxCfgRcv16K | RxNoWrap |
689 (RX_FIFO_THRESH << RxCfgFIFOShift) |
690 (RX_DMA_BURST << RxCfgDMAShift);
691 #elif RX_BUF_IDX == 2
692 static const unsigned int rtl8139_rx_config =
693 RxCfgRcv32K | RxNoWrap |
694 (RX_FIFO_THRESH << RxCfgFIFOShift) |
695 (RX_DMA_BURST << RxCfgDMAShift);
696 #elif RX_BUF_IDX == 3
697 static const unsigned int rtl8139_rx_config =
698 RxCfgRcv64K |
699 (RX_FIFO_THRESH << RxCfgFIFOShift) |
700 (RX_DMA_BURST << RxCfgDMAShift);
701 #else
702 #error "Invalid configuration for 8139_RXBUF_IDX"
703 #endif
704
705 static const unsigned int rtl8139_tx_config =
706 TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
707
708 static void __rtl8139_cleanup_dev (struct net_device *dev)
709 {
710 struct rtl8139_private *tp = netdev_priv(dev);
711 struct pci_dev *pdev;
712
713 assert (dev != NULL);
714 assert (tp->pci_dev != NULL);
715 pdev = tp->pci_dev;
716
717 #ifdef USE_IO_OPS
718 if (tp->mmio_addr)
719 ioport_unmap (tp->mmio_addr);
720 #else
721 if (tp->mmio_addr)
722 pci_iounmap (pdev, tp->mmio_addr);
723 #endif /* USE_IO_OPS */
724
725 /* it's ok to call this even if we have no regions to free */
726 pci_release_regions (pdev);
727
728 free_netdev(dev);
729 pci_set_drvdata (pdev, NULL);
730 }
731
732
733 static void rtl8139_chip_reset (void __iomem *ioaddr)
734 {
735 int i;
736
737 /* Soft reset the chip. */
738 RTL_W8 (ChipCmd, CmdReset);
739
740 /* Check that the chip has finished the reset. */
741 for (i = 1000; i > 0; i--) {
742 barrier();
743 if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
744 break;
745 udelay (10);
746 }
747 }
748
749
750 static int __devinit rtl8139_init_board (struct pci_dev *pdev,
751 struct net_device **dev_out)
752 {
753 void __iomem *ioaddr;
754 struct net_device *dev;
755 struct rtl8139_private *tp;
756 u8 tmp8;
757 int rc, disable_dev_on_err = 0;
758 unsigned int i;
759 unsigned long pio_start, pio_end, pio_flags, pio_len;
760 unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
761 u32 version;
762
763 assert (pdev != NULL);
764
765 *dev_out = NULL;
766
767 /* dev and priv zeroed in alloc_etherdev */
768 dev = alloc_etherdev (sizeof (*tp));
769 if (dev == NULL) {
770 dev_err(&pdev->dev, "Unable to alloc new net device\n");
771 return -ENOMEM;
772 }
773 SET_MODULE_OWNER(dev);
774 SET_NETDEV_DEV(dev, &pdev->dev);
775
776 tp = netdev_priv(dev);
777 tp->pci_dev = pdev;
778
779 /* enable device (incl. PCI PM wakeup and hotplug setup) */
780 rc = pci_enable_device (pdev);
781 if (rc)
782 goto err_out;
783
784 pio_start = pci_resource_start (pdev, 0);
785 pio_end = pci_resource_end (pdev, 0);
786 pio_flags = pci_resource_flags (pdev, 0);
787 pio_len = pci_resource_len (pdev, 0);
788
789 mmio_start = pci_resource_start (pdev, 1);
790 mmio_end = pci_resource_end (pdev, 1);
791 mmio_flags = pci_resource_flags (pdev, 1);
792 mmio_len = pci_resource_len (pdev, 1);
793
794 /* set this immediately, we need to know before
795 * we talk to the chip directly */
796 DPRINTK("PIO region size == 0x%02X\n", pio_len);
797 DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
798
799 #ifdef USE_IO_OPS
800 /* make sure PCI base addr 0 is PIO */
801 if (!(pio_flags & IORESOURCE_IO)) {
802 dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
803 rc = -ENODEV;
804 goto err_out;
805 }
806 /* check for weird/broken PCI region reporting */
807 if (pio_len < RTL_MIN_IO_SIZE) {
808 dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
809 rc = -ENODEV;
810 goto err_out;
811 }
812 #else
813 /* make sure PCI base addr 1 is MMIO */
814 if (!(mmio_flags & IORESOURCE_MEM)) {
815 dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
816 rc = -ENODEV;
817 goto err_out;
818 }
819 if (mmio_len < RTL_MIN_IO_SIZE) {
820 dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
821 rc = -ENODEV;
822 goto err_out;
823 }
824 #endif
825
826 rc = pci_request_regions (pdev, DRV_NAME);
827 if (rc)
828 goto err_out;
829 disable_dev_on_err = 1;
830
831 /* enable PCI bus-mastering */
832 pci_set_master (pdev);
833
834 #ifdef USE_IO_OPS
835 ioaddr = ioport_map(pio_start, pio_len);
836 if (!ioaddr) {
837 dev_err(&pdev->dev, "cannot map PIO, aborting\n");
838 rc = -EIO;
839 goto err_out;
840 }
841 dev->base_addr = pio_start;
842 tp->mmio_addr = ioaddr;
843 tp->regs_len = pio_len;
844 #else
845 /* ioremap MMIO region */
846 ioaddr = pci_iomap(pdev, 1, 0);
847 if (ioaddr == NULL) {
848 dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
849 rc = -EIO;
850 goto err_out;
851 }
852 dev->base_addr = (long) ioaddr;
853 tp->mmio_addr = ioaddr;
854 tp->regs_len = mmio_len;
855 #endif /* USE_IO_OPS */
856
857 /* Bring old chips out of low-power mode. */
858 RTL_W8 (HltClk, 'R');
859
860 /* check for missing/broken hardware */
861 if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
862 dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
863 rc = -EIO;
864 goto err_out;
865 }
866
867 /* identify chip attached to board */
868 version = RTL_R32 (TxConfig) & HW_REVID_MASK;
869 for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
870 if (version == rtl_chip_info[i].version) {
871 tp->chipset = i;
872 goto match;
873 }
874
875 /* if unknown chip, assume array element #0, original RTL-8139 in this case */
876 dev_printk (KERN_DEBUG, &pdev->dev,
877 "unknown chip version, assuming RTL-8139\n");
878 dev_printk (KERN_DEBUG, &pdev->dev,
879 "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
880 tp->chipset = 0;
881
882 match:
883 DPRINTK ("chipset id (%d) == index %d, '%s'\n",
884 version, i, rtl_chip_info[i].name);
885
886 if (tp->chipset >= CH_8139B) {
887 u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
888 DPRINTK("PCI PM wakeup\n");
889 if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
890 (tmp8 & LWAKE))
891 new_tmp8 &= ~LWAKE;
892 new_tmp8 |= Cfg1_PM_Enable;
893 if (new_tmp8 != tmp8) {
894 RTL_W8 (Cfg9346, Cfg9346_Unlock);
895 RTL_W8 (Config1, tmp8);
896 RTL_W8 (Cfg9346, Cfg9346_Lock);
897 }
898 if (rtl_chip_info[tp->chipset].flags & HasLWake) {
899 tmp8 = RTL_R8 (Config4);
900 if (tmp8 & LWPTN) {
901 RTL_W8 (Cfg9346, Cfg9346_Unlock);
902 RTL_W8 (Config4, tmp8 & ~LWPTN);
903 RTL_W8 (Cfg9346, Cfg9346_Lock);
904 }
905 }
906 } else {
907 DPRINTK("Old chip wakeup\n");
908 tmp8 = RTL_R8 (Config1);
909 tmp8 &= ~(SLEEP | PWRDN);
910 RTL_W8 (Config1, tmp8);
911 }
912
913 rtl8139_chip_reset (ioaddr);
914
915 *dev_out = dev;
916 return 0;
917
918 err_out:
919 __rtl8139_cleanup_dev (dev);
920 if (disable_dev_on_err)
921 pci_disable_device (pdev);
922 return rc;
923 }
924
925
926 static int __devinit rtl8139_init_one (struct pci_dev *pdev,
927 const struct pci_device_id *ent)
928 {
929 struct net_device *dev = NULL;
930 struct rtl8139_private *tp;
931 int i, addr_len, option;
932 void __iomem *ioaddr;
933 static int board_idx = -1;
934
935 assert (pdev != NULL);
936 assert (ent != NULL);
937
938 board_idx++;
939
940 /* when we're built into the kernel, the driver version message
941 * is only printed if at least one 8139 board has been found
942 */
943 #ifndef MODULE
944 {
945 static int printed_version;
946 if (!printed_version++)
947 printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
948 }
949 #endif
950
951 if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
952 pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
953 dev_info(&pdev->dev,
954 "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
955 pdev->vendor, pdev->device, pdev->revision);
956 dev_info(&pdev->dev,
957 "Use the \"8139cp\" driver for improved performance and stability.\n");
958 }
959
960 i = rtl8139_init_board (pdev, &dev);
961 if (i < 0)
962 return i;
963
964 assert (dev != NULL);
965 tp = netdev_priv(dev);
966
967 ioaddr = tp->mmio_addr;
968 assert (ioaddr != NULL);
969
970 addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
971 for (i = 0; i < 3; i++)
972 ((u16 *) (dev->dev_addr))[i] =
973 le16_to_cpu (read_eeprom (ioaddr, i + 7, addr_len));
974 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
975
976 /* The Rtl8139-specific entries in the device structure. */
977 dev->open = rtl8139_open;
978 dev->hard_start_xmit = rtl8139_start_xmit;
979 dev->poll = rtl8139_poll;
980 dev->weight = 64;
981 dev->stop = rtl8139_close;
982 dev->get_stats = rtl8139_get_stats;
983 dev->set_multicast_list = rtl8139_set_rx_mode;
984 dev->do_ioctl = netdev_ioctl;
985 dev->ethtool_ops = &rtl8139_ethtool_ops;
986 dev->tx_timeout = rtl8139_tx_timeout;
987 dev->watchdog_timeo = TX_TIMEOUT;
988 #ifdef CONFIG_NET_POLL_CONTROLLER
989 dev->poll_controller = rtl8139_poll_controller;
990 #endif
991
992 /* note: the hardware is not capable of sg/csum/highdma, however
993 * through the use of skb_copy_and_csum_dev we enable these
994 * features
995 */
996 dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
997
998 dev->irq = pdev->irq;
999
1000 /* tp zeroed and aligned in alloc_etherdev */
1001 tp = netdev_priv(dev);
1002
1003 /* note: tp->chipset set in rtl8139_init_board */
1004 tp->drv_flags = board_info[ent->driver_data].hw_flags;
1005 tp->mmio_addr = ioaddr;
1006 tp->msg_enable =
1007 (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
1008 spin_lock_init (&tp->lock);
1009 spin_lock_init (&tp->rx_lock);
1010 INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
1011 tp->mii.dev = dev;
1012 tp->mii.mdio_read = mdio_read;
1013 tp->mii.mdio_write = mdio_write;
1014 tp->mii.phy_id_mask = 0x3f;
1015 tp->mii.reg_num_mask = 0x1f;
1016
1017 /* dev is fully set up and ready to use now */
1018 DPRINTK("about to register device named %s (%p)...\n", dev->name, dev);
1019 i = register_netdev (dev);
1020 if (i) goto err_out;
1021
1022 pci_set_drvdata (pdev, dev);
1023
1024 printk (KERN_INFO "%s: %s at 0x%lx, "
1025 "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
1026 "IRQ %d\n",
1027 dev->name,
1028 board_info[ent->driver_data].name,
1029 dev->base_addr,
1030 dev->dev_addr[0], dev->dev_addr[1],
1031 dev->dev_addr[2], dev->dev_addr[3],
1032 dev->dev_addr[4], dev->dev_addr[5],
1033 dev->irq);
1034
1035 printk (KERN_DEBUG "%s: Identified 8139 chip type '%s'\n",
1036 dev->name, rtl_chip_info[tp->chipset].name);
1037
1038 /* Find the connected MII xcvrs.
1039 Doing this in open() would allow detecting external xcvrs later, but
1040 takes too much time. */
1041 #ifdef CONFIG_8139TOO_8129
1042 if (tp->drv_flags & HAS_MII_XCVR) {
1043 int phy, phy_idx = 0;
1044 for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
1045 int mii_status = mdio_read(dev, phy, 1);
1046 if (mii_status != 0xffff && mii_status != 0x0000) {
1047 u16 advertising = mdio_read(dev, phy, 4);
1048 tp->phys[phy_idx++] = phy;
1049 printk(KERN_INFO "%s: MII transceiver %d status 0x%4.4x "
1050 "advertising %4.4x.\n",
1051 dev->name, phy, mii_status, advertising);
1052 }
1053 }
1054 if (phy_idx == 0) {
1055 printk(KERN_INFO "%s: No MII transceivers found! Assuming SYM "
1056 "transceiver.\n",
1057 dev->name);
1058 tp->phys[0] = 32;
1059 }
1060 } else
1061 #endif
1062 tp->phys[0] = 32;
1063 tp->mii.phy_id = tp->phys[0];
1064
1065 /* The lower four bits are the media type. */
1066 option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
1067 if (option > 0) {
1068 tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
1069 tp->default_port = option & 0xFF;
1070 if (tp->default_port)
1071 tp->mii.force_media = 1;
1072 }
1073 if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0)
1074 tp->mii.full_duplex = full_duplex[board_idx];
1075 if (tp->mii.full_duplex) {
1076 printk(KERN_INFO "%s: Media type forced to Full Duplex.\n", dev->name);
1077 /* Changing the MII-advertised media because might prevent
1078 re-connection. */
1079 tp->mii.force_media = 1;
1080 }
1081 if (tp->default_port) {
1082 printk(KERN_INFO " Forcing %dMbps %s-duplex operation.\n",
1083 (option & 0x20 ? 100 : 10),
1084 (option & 0x10 ? "full" : "half"));
1085 mdio_write(dev, tp->phys[0], 0,
1086 ((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */
1087 ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
1088 }
1089
1090 /* Put the chip into low-power mode. */
1091 if (rtl_chip_info[tp->chipset].flags & HasHltClk)
1092 RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
1093
1094 return 0;
1095
1096 err_out:
1097 __rtl8139_cleanup_dev (dev);
1098 pci_disable_device (pdev);
1099 return i;
1100 }
1101
1102
1103 static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
1104 {
1105 struct net_device *dev = pci_get_drvdata (pdev);
1106
1107 assert (dev != NULL);
1108
1109 flush_scheduled_work();
1110
1111 unregister_netdev (dev);
1112
1113 __rtl8139_cleanup_dev (dev);
1114 pci_disable_device (pdev);
1115 }
1116
1117
1118 /* Serial EEPROM section. */
1119
1120 /* EEPROM_Ctrl bits. */
1121 #define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
1122 #define EE_CS 0x08 /* EEPROM chip select. */
1123 #define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
1124 #define EE_WRITE_0 0x00
1125 #define EE_WRITE_1 0x02
1126 #define EE_DATA_READ 0x01 /* EEPROM chip data out. */
1127 #define EE_ENB (0x80 | EE_CS)
1128
1129 /* Delay between EEPROM clock transitions.
1130 No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
1131 */
1132
1133 #define eeprom_delay() (void)RTL_R32(Cfg9346)
1134
1135 /* The EEPROM commands include the alway-set leading bit. */
1136 #define EE_WRITE_CMD (5)
1137 #define EE_READ_CMD (6)
1138 #define EE_ERASE_CMD (7)
1139
1140 static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
1141 {
1142 int i;
1143 unsigned retval = 0;
1144 int read_cmd = location | (EE_READ_CMD << addr_len);
1145
1146 RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
1147 RTL_W8 (Cfg9346, EE_ENB);
1148 eeprom_delay ();
1149
1150 /* Shift the read command bits out. */
1151 for (i = 4 + addr_len; i >= 0; i--) {
1152 int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
1153 RTL_W8 (Cfg9346, EE_ENB | dataval);
1154 eeprom_delay ();
1155 RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
1156 eeprom_delay ();
1157 }
1158 RTL_W8 (Cfg9346, EE_ENB);
1159 eeprom_delay ();
1160
1161 for (i = 16; i > 0; i--) {
1162 RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
1163 eeprom_delay ();
1164 retval =
1165 (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
1166 0);
1167 RTL_W8 (Cfg9346, EE_ENB);
1168 eeprom_delay ();
1169 }
1170
1171 /* Terminate the EEPROM access. */
1172 RTL_W8 (Cfg9346, ~EE_CS);
1173 eeprom_delay ();
1174
1175 return retval;
1176 }
1177
1178 /* MII serial management: mostly bogus for now. */
1179 /* Read and write the MII management registers using software-generated
1180 serial MDIO protocol.
1181 The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
1182 met by back-to-back PCI I/O cycles, but we insert a delay to avoid
1183 "overclocking" issues. */
1184 #define MDIO_DIR 0x80
1185 #define MDIO_DATA_OUT 0x04
1186 #define MDIO_DATA_IN 0x02
1187 #define MDIO_CLK 0x01
1188 #define MDIO_WRITE0 (MDIO_DIR)
1189 #define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
1190
1191 #define mdio_delay() RTL_R8(Config4)
1192
1193
1194 static const char mii_2_8139_map[8] = {
1195 BasicModeCtrl,
1196 BasicModeStatus,
1197 0,
1198 0,
1199 NWayAdvert,
1200 NWayLPAR,
1201 NWayExpansion,
1202 0
1203 };
1204
1205
1206 #ifdef CONFIG_8139TOO_8129
1207 /* Syncronize the MII management interface by shifting 32 one bits out. */
1208 static void mdio_sync (void __iomem *ioaddr)
1209 {
1210 int i;
1211
1212 for (i = 32; i >= 0; i--) {
1213 RTL_W8 (Config4, MDIO_WRITE1);
1214 mdio_delay ();
1215 RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
1216 mdio_delay ();
1217 }
1218 }
1219 #endif
1220
1221 static int mdio_read (struct net_device *dev, int phy_id, int location)
1222 {
1223 struct rtl8139_private *tp = netdev_priv(dev);
1224 int retval = 0;
1225 #ifdef CONFIG_8139TOO_8129
1226 void __iomem *ioaddr = tp->mmio_addr;
1227 int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
1228 int i;
1229 #endif
1230
1231 if (phy_id > 31) { /* Really a 8139. Use internal registers. */
1232 void __iomem *ioaddr = tp->mmio_addr;
1233 return location < 8 && mii_2_8139_map[location] ?
1234 RTL_R16 (mii_2_8139_map[location]) : 0;
1235 }
1236
1237 #ifdef CONFIG_8139TOO_8129
1238 mdio_sync (ioaddr);
1239 /* Shift the read command bits out. */
1240 for (i = 15; i >= 0; i--) {
1241 int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
1242
1243 RTL_W8 (Config4, MDIO_DIR | dataval);
1244 mdio_delay ();
1245 RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
1246 mdio_delay ();
1247 }
1248
1249 /* Read the two transition, 16 data, and wire-idle bits. */
1250 for (i = 19; i > 0; i--) {
1251 RTL_W8 (Config4, 0);
1252 mdio_delay ();
1253 retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
1254 RTL_W8 (Config4, MDIO_CLK);
1255 mdio_delay ();
1256 }
1257 #endif
1258
1259 return (retval >> 1) & 0xffff;
1260 }
1261
1262
1263 static void mdio_write (struct net_device *dev, int phy_id, int location,
1264 int value)
1265 {
1266 struct rtl8139_private *tp = netdev_priv(dev);
1267 #ifdef CONFIG_8139TOO_8129
1268 void __iomem *ioaddr = tp->mmio_addr;
1269 int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
1270 int i;
1271 #endif
1272
1273 if (phy_id > 31) { /* Really a 8139. Use internal registers. */
1274 void __iomem *ioaddr = tp->mmio_addr;
1275 if (location == 0) {
1276 RTL_W8 (Cfg9346, Cfg9346_Unlock);
1277 RTL_W16 (BasicModeCtrl, value);
1278 RTL_W8 (Cfg9346, Cfg9346_Lock);
1279 } else if (location < 8 && mii_2_8139_map[location])
1280 RTL_W16 (mii_2_8139_map[location], value);
1281 return;
1282 }
1283
1284 #ifdef CONFIG_8139TOO_8129
1285 mdio_sync (ioaddr);
1286
1287 /* Shift the command bits out. */
1288 for (i = 31; i >= 0; i--) {
1289 int dataval =
1290 (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
1291 RTL_W8 (Config4, dataval);
1292 mdio_delay ();
1293 RTL_W8 (Config4, dataval | MDIO_CLK);
1294 mdio_delay ();
1295 }
1296 /* Clear out extra bits. */
1297 for (i = 2; i > 0; i--) {
1298 RTL_W8 (Config4, 0);
1299 mdio_delay ();
1300 RTL_W8 (Config4, MDIO_CLK);
1301 mdio_delay ();
1302 }
1303 #endif
1304 }
1305
1306
1307 static int rtl8139_open (struct net_device *dev)
1308 {
1309 struct rtl8139_private *tp = netdev_priv(dev);
1310 int retval;
1311 void __iomem *ioaddr = tp->mmio_addr;
1312
1313 retval = request_irq (dev->irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev);
1314 if (retval)
1315 return retval;
1316
1317 tp->tx_bufs = pci_alloc_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
1318 &tp->tx_bufs_dma);
1319 tp->rx_ring = pci_alloc_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
1320 &tp->rx_ring_dma);
1321 if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
1322 free_irq(dev->irq, dev);
1323
1324 if (tp->tx_bufs)
1325 pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
1326 tp->tx_bufs, tp->tx_bufs_dma);
1327 if (tp->rx_ring)
1328 pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
1329 tp->rx_ring, tp->rx_ring_dma);
1330
1331 return -ENOMEM;
1332
1333 }
1334
1335 tp->mii.full_duplex = tp->mii.force_media;
1336 tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
1337
1338 rtl8139_init_ring (dev);
1339 rtl8139_hw_start (dev);
1340 netif_start_queue (dev);
1341
1342 if (netif_msg_ifup(tp))
1343 printk(KERN_DEBUG "%s: rtl8139_open() ioaddr %#llx IRQ %d"
1344 " GP Pins %2.2x %s-duplex.\n", dev->name,
1345 (unsigned long long)pci_resource_start (tp->pci_dev, 1),
1346 dev->irq, RTL_R8 (MediaStatus),
1347 tp->mii.full_duplex ? "full" : "half");
1348
1349 rtl8139_start_thread(tp);
1350
1351 return 0;
1352 }
1353
1354
1355 static void rtl_check_media (struct net_device *dev, unsigned int init_media)
1356 {
1357 struct rtl8139_private *tp = netdev_priv(dev);
1358
1359 if (tp->phys[0] >= 0) {
1360 mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
1361 }
1362 }
1363
1364 /* Start the hardware at open or resume. */
1365 static void rtl8139_hw_start (struct net_device *dev)
1366 {
1367 struct rtl8139_private *tp = netdev_priv(dev);
1368 void __iomem *ioaddr = tp->mmio_addr;
1369 u32 i;
1370 u8 tmp;
1371
1372 /* Bring old chips out of low-power mode. */
1373 if (rtl_chip_info[tp->chipset].flags & HasHltClk)
1374 RTL_W8 (HltClk, 'R');
1375
1376 rtl8139_chip_reset (ioaddr);
1377
1378 /* unlock Config[01234] and BMCR register writes */
1379 RTL_W8_F (Cfg9346, Cfg9346_Unlock);
1380 /* Restore our idea of the MAC address. */
1381 RTL_W32_F (MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
1382 RTL_W32_F (MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
1383
1384 /* Must enable Tx/Rx before setting transfer thresholds! */
1385 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1386
1387 tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
1388 RTL_W32 (RxConfig, tp->rx_config);
1389 RTL_W32 (TxConfig, rtl8139_tx_config);
1390
1391 tp->cur_rx = 0;
1392
1393 rtl_check_media (dev, 1);
1394
1395 if (tp->chipset >= CH_8139B) {
1396 /* Disable magic packet scanning, which is enabled
1397 * when PM is enabled in Config1. It can be reenabled
1398 * via ETHTOOL_SWOL if desired. */
1399 RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
1400 }
1401
1402 DPRINTK("init buffer addresses\n");
1403
1404 /* Lock Config[01234] and BMCR register writes */
1405 RTL_W8 (Cfg9346, Cfg9346_Lock);
1406
1407 /* init Rx ring buffer DMA address */
1408 RTL_W32_F (RxBuf, tp->rx_ring_dma);
1409
1410 /* init Tx buffer DMA addresses */
1411 for (i = 0; i < NUM_TX_DESC; i++)
1412 RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
1413
1414 RTL_W32 (RxMissed, 0);
1415
1416 rtl8139_set_rx_mode (dev);
1417
1418 /* no early-rx interrupts */
1419 RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
1420
1421 /* make sure RxTx has started */
1422 tmp = RTL_R8 (ChipCmd);
1423 if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
1424 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1425
1426 /* Enable all known interrupts by setting the interrupt mask. */
1427 RTL_W16 (IntrMask, rtl8139_intr_mask);
1428 }
1429
1430
1431 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
1432 static void rtl8139_init_ring (struct net_device *dev)
1433 {
1434 struct rtl8139_private *tp = netdev_priv(dev);
1435 int i;
1436
1437 tp->cur_rx = 0;
1438 tp->cur_tx = 0;
1439 tp->dirty_tx = 0;
1440
1441 for (i = 0; i < NUM_TX_DESC; i++)
1442 tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
1443 }
1444
1445
1446 /* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
1447 static int next_tick = 3 * HZ;
1448
1449 #ifndef CONFIG_8139TOO_TUNE_TWISTER
1450 static inline void rtl8139_tune_twister (struct net_device *dev,
1451 struct rtl8139_private *tp) {}
1452 #else
1453 enum TwisterParamVals {
1454 PARA78_default = 0x78fa8388,
1455 PARA7c_default = 0xcb38de43, /* param[0][3] */
1456 PARA7c_xxx = 0xcb38de43,
1457 };
1458
1459 static const unsigned long param[4][4] = {
1460 {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
1461 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
1462 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
1463 {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
1464 };
1465
1466 static void rtl8139_tune_twister (struct net_device *dev,
1467 struct rtl8139_private *tp)
1468 {
1469 int linkcase;
1470 void __iomem *ioaddr = tp->mmio_addr;
1471
1472 /* This is a complicated state machine to configure the "twister" for
1473 impedance/echos based on the cable length.
1474 All of this is magic and undocumented.
1475 */
1476 switch (tp->twistie) {
1477 case 1:
1478 if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
1479 /* We have link beat, let us tune the twister. */
1480 RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
1481 tp->twistie = 2; /* Change to state 2. */
1482 next_tick = HZ / 10;
1483 } else {
1484 /* Just put in some reasonable defaults for when beat returns. */
1485 RTL_W16 (CSCR, CSCR_LinkDownCmd);
1486 RTL_W32 (FIFOTMS, 0x20); /* Turn on cable test mode. */
1487 RTL_W32 (PARA78, PARA78_default);
1488 RTL_W32 (PARA7c, PARA7c_default);
1489 tp->twistie = 0; /* Bail from future actions. */
1490 }
1491 break;
1492 case 2:
1493 /* Read how long it took to hear the echo. */
1494 linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
1495 if (linkcase == 0x7000)
1496 tp->twist_row = 3;
1497 else if (linkcase == 0x3000)
1498 tp->twist_row = 2;
1499 else if (linkcase == 0x1000)
1500 tp->twist_row = 1;
1501 else
1502 tp->twist_row = 0;
1503 tp->twist_col = 0;
1504 tp->twistie = 3; /* Change to state 2. */
1505 next_tick = HZ / 10;
1506 break;
1507 case 3:
1508 /* Put out four tuning parameters, one per 100msec. */
1509 if (tp->twist_col == 0)
1510 RTL_W16 (FIFOTMS, 0);
1511 RTL_W32 (PARA7c, param[(int) tp->twist_row]
1512 [(int) tp->twist_col]);
1513 next_tick = HZ / 10;
1514 if (++tp->twist_col >= 4) {
1515 /* For short cables we are done.
1516 For long cables (row == 3) check for mistune. */
1517 tp->twistie =
1518 (tp->twist_row == 3) ? 4 : 0;
1519 }
1520 break;
1521 case 4:
1522 /* Special case for long cables: check for mistune. */
1523 if ((RTL_R16 (CSCR) &
1524 CSCR_LinkStatusBits) == 0x7000) {
1525 tp->twistie = 0;
1526 break;
1527 } else {
1528 RTL_W32 (PARA7c, 0xfb38de03);
1529 tp->twistie = 5;
1530 next_tick = HZ / 10;
1531 }
1532 break;
1533 case 5:
1534 /* Retune for shorter cable (column 2). */
1535 RTL_W32 (FIFOTMS, 0x20);
1536 RTL_W32 (PARA78, PARA78_default);
1537 RTL_W32 (PARA7c, PARA7c_default);
1538 RTL_W32 (FIFOTMS, 0x00);
1539 tp->twist_row = 2;
1540 tp->twist_col = 0;
1541 tp->twistie = 3;
1542 next_tick = HZ / 10;
1543 break;
1544
1545 default:
1546 /* do nothing */
1547 break;
1548 }
1549 }
1550 #endif /* CONFIG_8139TOO_TUNE_TWISTER */
1551
1552 static inline void rtl8139_thread_iter (struct net_device *dev,
1553 struct rtl8139_private *tp,
1554 void __iomem *ioaddr)
1555 {
1556 int mii_lpa;
1557
1558 mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
1559
1560 if (!tp->mii.force_media && mii_lpa != 0xffff) {
1561 int duplex = (mii_lpa & LPA_100FULL)
1562 || (mii_lpa & 0x01C0) == 0x0040;
1563 if (tp->mii.full_duplex != duplex) {
1564 tp->mii.full_duplex = duplex;
1565
1566 if (mii_lpa) {
1567 printk (KERN_INFO
1568 "%s: Setting %s-duplex based on MII #%d link"
1569 " partner ability of %4.4x.\n",
1570 dev->name,
1571 tp->mii.full_duplex ? "full" : "half",
1572 tp->phys[0], mii_lpa);
1573 } else {
1574 printk(KERN_INFO"%s: media is unconnected, link down, or incompatible connection\n",
1575 dev->name);
1576 }
1577 #if 0
1578 RTL_W8 (Cfg9346, Cfg9346_Unlock);
1579 RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
1580 RTL_W8 (Cfg9346, Cfg9346_Lock);
1581 #endif
1582 }
1583 }
1584
1585 next_tick = HZ * 60;
1586
1587 rtl8139_tune_twister (dev, tp);
1588
1589 DPRINTK ("%s: Media selection tick, Link partner %4.4x.\n",
1590 dev->name, RTL_R16 (NWayLPAR));
1591 DPRINTK ("%s: Other registers are IntMask %4.4x IntStatus %4.4x\n",
1592 dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
1593 DPRINTK ("%s: Chip config %2.2x %2.2x.\n",
1594 dev->name, RTL_R8 (Config0),
1595 RTL_R8 (Config1));
1596 }
1597
1598 static void rtl8139_thread (struct work_struct *work)
1599 {
1600 struct rtl8139_private *tp =
1601 container_of(work, struct rtl8139_private, thread.work);
1602 struct net_device *dev = tp->mii.dev;
1603 unsigned long thr_delay = next_tick;
1604
1605 rtnl_lock();
1606
1607 if (!netif_running(dev))
1608 goto out_unlock;
1609
1610 if (tp->watchdog_fired) {
1611 tp->watchdog_fired = 0;
1612 rtl8139_tx_timeout_task(work);
1613 } else
1614 rtl8139_thread_iter(dev, tp, tp->mmio_addr);
1615
1616 if (tp->have_thread)
1617 schedule_delayed_work(&tp->thread, thr_delay);
1618 out_unlock:
1619 rtnl_unlock ();
1620 }
1621
1622 static void rtl8139_start_thread(struct rtl8139_private *tp)
1623 {
1624 tp->twistie = 0;
1625 if (tp->chipset == CH_8139_K)
1626 tp->twistie = 1;
1627 else if (tp->drv_flags & HAS_LNK_CHNG)
1628 return;
1629
1630 tp->have_thread = 1;
1631 tp->watchdog_fired = 0;
1632
1633 schedule_delayed_work(&tp->thread, next_tick);
1634 }
1635
1636 static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
1637 {
1638 tp->cur_tx = 0;
1639 tp->dirty_tx = 0;
1640
1641 /* XXX account for unsent Tx packets in tp->stats.tx_dropped */
1642 }
1643
1644 static void rtl8139_tx_timeout_task (struct work_struct *work)
1645 {
1646 struct rtl8139_private *tp =
1647 container_of(work, struct rtl8139_private, thread.work);
1648 struct net_device *dev = tp->mii.dev;
1649 void __iomem *ioaddr = tp->mmio_addr;
1650 int i;
1651 u8 tmp8;
1652
1653 printk (KERN_DEBUG "%s: Transmit timeout, status %2.2x %4.4x %4.4x "
1654 "media %2.2x.\n", dev->name, RTL_R8 (ChipCmd),
1655 RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
1656 /* Emit info to figure out what went wrong. */
1657 printk (KERN_DEBUG "%s: Tx queue start entry %ld dirty entry %ld.\n",
1658 dev->name, tp->cur_tx, tp->dirty_tx);
1659 for (i = 0; i < NUM_TX_DESC; i++)
1660 printk (KERN_DEBUG "%s: Tx descriptor %d is %8.8lx.%s\n",
1661 dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
1662 i == tp->dirty_tx % NUM_TX_DESC ?
1663 " (queue head)" : "");
1664
1665 tp->xstats.tx_timeouts++;
1666
1667 /* disable Tx ASAP, if not already */
1668 tmp8 = RTL_R8 (ChipCmd);
1669 if (tmp8 & CmdTxEnb)
1670 RTL_W8 (ChipCmd, CmdRxEnb);
1671
1672 spin_lock_bh(&tp->rx_lock);
1673 /* Disable interrupts by clearing the interrupt mask. */
1674 RTL_W16 (IntrMask, 0x0000);
1675
1676 /* Stop a shared interrupt from scavenging while we are. */
1677 spin_lock_irq(&tp->lock);
1678 rtl8139_tx_clear (tp);
1679 spin_unlock_irq(&tp->lock);
1680
1681 /* ...and finally, reset everything */
1682 if (netif_running(dev)) {
1683 rtl8139_hw_start (dev);
1684 netif_wake_queue (dev);
1685 }
1686 spin_unlock_bh(&tp->rx_lock);
1687 }
1688
1689 static void rtl8139_tx_timeout (struct net_device *dev)
1690 {
1691 struct rtl8139_private *tp = netdev_priv(dev);
1692
1693 tp->watchdog_fired = 1;
1694 if (!tp->have_thread) {
1695 INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
1696 schedule_delayed_work(&tp->thread, next_tick);
1697 }
1698 }
1699
1700 static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
1701 {
1702 struct rtl8139_private *tp = netdev_priv(dev);
1703 void __iomem *ioaddr = tp->mmio_addr;
1704 unsigned int entry;
1705 unsigned int len = skb->len;
1706 unsigned long flags;
1707
1708 /* Calculate the next Tx descriptor entry. */
1709 entry = tp->cur_tx % NUM_TX_DESC;
1710
1711 /* Note: the chip doesn't have auto-pad! */
1712 if (likely(len < TX_BUF_SIZE)) {
1713 if (len < ETH_ZLEN)
1714 memset(tp->tx_buf[entry], 0, ETH_ZLEN);
1715 skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
1716 dev_kfree_skb(skb);
1717 } else {
1718 dev_kfree_skb(skb);
1719 tp->stats.tx_dropped++;
1720 return 0;
1721 }
1722
1723 spin_lock_irqsave(&tp->lock, flags);
1724 RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
1725 tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
1726
1727 dev->trans_start = jiffies;
1728
1729 tp->cur_tx++;
1730 wmb();
1731
1732 if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
1733 netif_stop_queue (dev);
1734 spin_unlock_irqrestore(&tp->lock, flags);
1735
1736 if (netif_msg_tx_queued(tp))
1737 printk (KERN_DEBUG "%s: Queued Tx packet size %u to slot %d.\n",
1738 dev->name, len, entry);
1739
1740 return 0;
1741 }
1742
1743
1744 static void rtl8139_tx_interrupt (struct net_device *dev,
1745 struct rtl8139_private *tp,
1746 void __iomem *ioaddr)
1747 {
1748 unsigned long dirty_tx, tx_left;
1749
1750 assert (dev != NULL);
1751 assert (ioaddr != NULL);
1752
1753 dirty_tx = tp->dirty_tx;
1754 tx_left = tp->cur_tx - dirty_tx;
1755 while (tx_left > 0) {
1756 int entry = dirty_tx % NUM_TX_DESC;
1757 int txstatus;
1758
1759 txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
1760
1761 if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
1762 break; /* It still hasn't been Txed */
1763
1764 /* Note: TxCarrierLost is always asserted at 100mbps. */
1765 if (txstatus & (TxOutOfWindow | TxAborted)) {
1766 /* There was an major error, log it. */
1767 if (netif_msg_tx_err(tp))
1768 printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
1769 dev->name, txstatus);
1770 tp->stats.tx_errors++;
1771 if (txstatus & TxAborted) {
1772 tp->stats.tx_aborted_errors++;
1773 RTL_W32 (TxConfig, TxClearAbt);
1774 RTL_W16 (IntrStatus, TxErr);
1775 wmb();
1776 }
1777 if (txstatus & TxCarrierLost)
1778 tp->stats.tx_carrier_errors++;
1779 if (txstatus & TxOutOfWindow)
1780 tp->stats.tx_window_errors++;
1781 } else {
1782 if (txstatus & TxUnderrun) {
1783 /* Add 64 to the Tx FIFO threshold. */
1784 if (tp->tx_flag < 0x00300000)
1785 tp->tx_flag += 0x00020000;
1786 tp->stats.tx_fifo_errors++;
1787 }
1788 tp->stats.collisions += (txstatus >> 24) & 15;
1789 tp->stats.tx_bytes += txstatus & 0x7ff;
1790 tp->stats.tx_packets++;
1791 }
1792
1793 dirty_tx++;
1794 tx_left--;
1795 }
1796
1797 #ifndef RTL8139_NDEBUG
1798 if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
1799 printk (KERN_ERR "%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
1800 dev->name, dirty_tx, tp->cur_tx);
1801 dirty_tx += NUM_TX_DESC;
1802 }
1803 #endif /* RTL8139_NDEBUG */
1804
1805 /* only wake the queue if we did work, and the queue is stopped */
1806 if (tp->dirty_tx != dirty_tx) {
1807 tp->dirty_tx = dirty_tx;
1808 mb();
1809 netif_wake_queue (dev);
1810 }
1811 }
1812
1813
1814 /* TODO: clean this up! Rx reset need not be this intensive */
1815 static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
1816 struct rtl8139_private *tp, void __iomem *ioaddr)
1817 {
1818 u8 tmp8;
1819 #ifdef CONFIG_8139_OLD_RX_RESET
1820 int tmp_work;
1821 #endif
1822
1823 if (netif_msg_rx_err (tp))
1824 printk(KERN_DEBUG "%s: Ethernet frame had errors, status %8.8x.\n",
1825 dev->name, rx_status);
1826 tp->stats.rx_errors++;
1827 if (!(rx_status & RxStatusOK)) {
1828 if (rx_status & RxTooLong) {
1829 DPRINTK ("%s: Oversized Ethernet frame, status %4.4x!\n",
1830 dev->name, rx_status);
1831 /* A.C.: The chip hangs here. */
1832 }
1833 if (rx_status & (RxBadSymbol | RxBadAlign))
1834 tp->stats.rx_frame_errors++;
1835 if (rx_status & (RxRunt | RxTooLong))
1836 tp->stats.rx_length_errors++;
1837 if (rx_status & RxCRCErr)
1838 tp->stats.rx_crc_errors++;
1839 } else {
1840 tp->xstats.rx_lost_in_ring++;
1841 }
1842
1843 #ifndef CONFIG_8139_OLD_RX_RESET
1844 tmp8 = RTL_R8 (ChipCmd);
1845 RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
1846 RTL_W8 (ChipCmd, tmp8);
1847 RTL_W32 (RxConfig, tp->rx_config);
1848 tp->cur_rx = 0;
1849 #else
1850 /* Reset the receiver, based on RealTek recommendation. (Bug?) */
1851
1852 /* disable receive */
1853 RTL_W8_F (ChipCmd, CmdTxEnb);
1854 tmp_work = 200;
1855 while (--tmp_work > 0) {
1856 udelay(1);
1857 tmp8 = RTL_R8 (ChipCmd);
1858 if (!(tmp8 & CmdRxEnb))
1859 break;
1860 }
1861 if (tmp_work <= 0)
1862 printk (KERN_WARNING PFX "rx stop wait too long\n");
1863 /* restart receive */
1864 tmp_work = 200;
1865 while (--tmp_work > 0) {
1866 RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
1867 udelay(1);
1868 tmp8 = RTL_R8 (ChipCmd);
1869 if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
1870 break;
1871 }
1872 if (tmp_work <= 0)
1873 printk (KERN_WARNING PFX "tx/rx enable wait too long\n");
1874
1875 /* and reinitialize all rx related registers */
1876 RTL_W8_F (Cfg9346, Cfg9346_Unlock);
1877 /* Must enable Tx/Rx before setting transfer thresholds! */
1878 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1879
1880 tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
1881 RTL_W32 (RxConfig, tp->rx_config);
1882 tp->cur_rx = 0;
1883
1884 DPRINTK("init buffer addresses\n");
1885
1886 /* Lock Config[01234] and BMCR register writes */
1887 RTL_W8 (Cfg9346, Cfg9346_Lock);
1888
1889 /* init Rx ring buffer DMA address */
1890 RTL_W32_F (RxBuf, tp->rx_ring_dma);
1891
1892 /* A.C.: Reset the multicast list. */
1893 __set_rx_mode (dev);
1894 #endif
1895 }
1896
1897 #if RX_BUF_IDX == 3
1898 static __inline__ void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
1899 u32 offset, unsigned int size)
1900 {
1901 u32 left = RX_BUF_LEN - offset;
1902
1903 if (size > left) {
1904 skb_copy_to_linear_data(skb, ring + offset, left);
1905 skb_copy_to_linear_data_offset(skb, left, ring, size - left);
1906 } else
1907 skb_copy_to_linear_data(skb, ring + offset, size);
1908 }
1909 #endif
1910
1911 static void rtl8139_isr_ack(struct rtl8139_private *tp)
1912 {
1913 void __iomem *ioaddr = tp->mmio_addr;
1914 u16 status;
1915
1916 status = RTL_R16 (IntrStatus) & RxAckBits;
1917
1918 /* Clear out errors and receive interrupts */
1919 if (likely(status != 0)) {
1920 if (unlikely(status & (RxFIFOOver | RxOverflow))) {
1921 tp->stats.rx_errors++;
1922 if (status & RxFIFOOver)
1923 tp->stats.rx_fifo_errors++;
1924 }
1925 RTL_W16_F (IntrStatus, RxAckBits);
1926 }
1927 }
1928
1929 static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
1930 int budget)
1931 {
1932 void __iomem *ioaddr = tp->mmio_addr;
1933 int received = 0;
1934 unsigned char *rx_ring = tp->rx_ring;
1935 unsigned int cur_rx = tp->cur_rx;
1936 unsigned int rx_size = 0;
1937
1938 DPRINTK ("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
1939 " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
1940 RTL_R16 (RxBufAddr),
1941 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
1942
1943 while (netif_running(dev) && received < budget
1944 && (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
1945 u32 ring_offset = cur_rx % RX_BUF_LEN;
1946 u32 rx_status;
1947 unsigned int pkt_size;
1948 struct sk_buff *skb;
1949
1950 rmb();
1951
1952 /* read size+status of next frame from DMA ring buffer */
1953 rx_status = le32_to_cpu (*(u32 *) (rx_ring + ring_offset));
1954 rx_size = rx_status >> 16;
1955 pkt_size = rx_size - 4;
1956
1957 if (netif_msg_rx_status(tp))
1958 printk(KERN_DEBUG "%s: rtl8139_rx() status %4.4x, size %4.4x,"
1959 " cur %4.4x.\n", dev->name, rx_status,
1960 rx_size, cur_rx);
1961 #if RTL8139_DEBUG > 2
1962 {
1963 int i;
1964 DPRINTK ("%s: Frame contents ", dev->name);
1965 for (i = 0; i < 70; i++)
1966 printk (" %2.2x",
1967 rx_ring[ring_offset + i]);
1968 printk (".\n");
1969 }
1970 #endif
1971
1972 /* Packet copy from FIFO still in progress.
1973 * Theoretically, this should never happen
1974 * since EarlyRx is disabled.
1975 */
1976 if (unlikely(rx_size == 0xfff0)) {
1977 if (!tp->fifo_copy_timeout)
1978 tp->fifo_copy_timeout = jiffies + 2;
1979 else if (time_after(jiffies, tp->fifo_copy_timeout)) {
1980 DPRINTK ("%s: hung FIFO. Reset.", dev->name);
1981 rx_size = 0;
1982 goto no_early_rx;
1983 }
1984 if (netif_msg_intr(tp)) {
1985 printk(KERN_DEBUG "%s: fifo copy in progress.",
1986 dev->name);
1987 }
1988 tp->xstats.early_rx++;
1989 break;
1990 }
1991
1992 no_early_rx:
1993 tp->fifo_copy_timeout = 0;
1994
1995 /* If Rx err or invalid rx_size/rx_status received
1996 * (which happens if we get lost in the ring),
1997 * Rx process gets reset, so we abort any further
1998 * Rx processing.
1999 */
2000 if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
2001 (rx_size < 8) ||
2002 (!(rx_status & RxStatusOK)))) {
2003 rtl8139_rx_err (rx_status, dev, tp, ioaddr);
2004 received = -1;
2005 goto out;
2006 }
2007
2008 /* Malloc up new buffer, compatible with net-2e. */
2009 /* Omit the four octet CRC from the length. */
2010
2011 skb = dev_alloc_skb (pkt_size + 2);
2012 if (likely(skb)) {
2013 skb_reserve (skb, 2); /* 16 byte align the IP fields. */
2014 #if RX_BUF_IDX == 3
2015 wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
2016 #else
2017 skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
2018 #endif
2019 skb_put (skb, pkt_size);
2020
2021 skb->protocol = eth_type_trans (skb, dev);
2022
2023 dev->last_rx = jiffies;
2024 tp->stats.rx_bytes += pkt_size;
2025 tp->stats.rx_packets++;
2026
2027 netif_receive_skb (skb);
2028 } else {
2029 if (net_ratelimit())
2030 printk (KERN_WARNING
2031 "%s: Memory squeeze, dropping packet.\n",
2032 dev->name);
2033 tp->stats.rx_dropped++;
2034 }
2035 received++;
2036
2037 cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
2038 RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
2039
2040 rtl8139_isr_ack(tp);
2041 }
2042
2043 if (unlikely(!received || rx_size == 0xfff0))
2044 rtl8139_isr_ack(tp);
2045
2046 #if RTL8139_DEBUG > 1
2047 DPRINTK ("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
2048 " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
2049 RTL_R16 (RxBufAddr),
2050 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
2051 #endif
2052
2053 tp->cur_rx = cur_rx;
2054
2055 /*
2056 * The receive buffer should be mostly empty.
2057 * Tell NAPI to reenable the Rx irq.
2058 */
2059 if (tp->fifo_copy_timeout)
2060 received = budget;
2061
2062 out:
2063 return received;
2064 }
2065
2066
2067 static void rtl8139_weird_interrupt (struct net_device *dev,
2068 struct rtl8139_private *tp,
2069 void __iomem *ioaddr,
2070 int status, int link_changed)
2071 {
2072 DPRINTK ("%s: Abnormal interrupt, status %8.8x.\n",
2073 dev->name, status);
2074
2075 assert (dev != NULL);
2076 assert (tp != NULL);
2077 assert (ioaddr != NULL);
2078
2079 /* Update the error count. */
2080 tp->stats.rx_missed_errors += RTL_R32 (RxMissed);
2081 RTL_W32 (RxMissed, 0);
2082
2083 if ((status & RxUnderrun) && link_changed &&
2084 (tp->drv_flags & HAS_LNK_CHNG)) {
2085 rtl_check_media(dev, 0);
2086 status &= ~RxUnderrun;
2087 }
2088
2089 if (status & (RxUnderrun | RxErr))
2090 tp->stats.rx_errors++;
2091
2092 if (status & PCSTimeout)
2093 tp->stats.rx_length_errors++;
2094 if (status & RxUnderrun)
2095 tp->stats.rx_fifo_errors++;
2096 if (status & PCIErr) {
2097 u16 pci_cmd_status;
2098 pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
2099 pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
2100
2101 printk (KERN_ERR "%s: PCI Bus error %4.4x.\n",
2102 dev->name, pci_cmd_status);
2103 }
2104 }
2105
2106 static int rtl8139_poll(struct net_device *dev, int *budget)
2107 {
2108 struct rtl8139_private *tp = netdev_priv(dev);
2109 void __iomem *ioaddr = tp->mmio_addr;
2110 int orig_budget = min(*budget, dev->quota);
2111 int done = 1;
2112
2113 spin_lock(&tp->rx_lock);
2114 if (likely(RTL_R16(IntrStatus) & RxAckBits)) {
2115 int work_done;
2116
2117 work_done = rtl8139_rx(dev, tp, orig_budget);
2118 if (likely(work_done > 0)) {
2119 *budget -= work_done;
2120 dev->quota -= work_done;
2121 done = (work_done < orig_budget);
2122 }
2123 }
2124
2125 if (done) {
2126 unsigned long flags;
2127 /*
2128 * Order is important since data can get interrupted
2129 * again when we think we are done.
2130 */
2131 local_irq_save(flags);
2132 RTL_W16_F(IntrMask, rtl8139_intr_mask);
2133 __netif_rx_complete(dev);
2134 local_irq_restore(flags);
2135 }
2136 spin_unlock(&tp->rx_lock);
2137
2138 return !done;
2139 }
2140
2141 /* The interrupt handler does all of the Rx thread work and cleans up
2142 after the Tx thread. */
2143 static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
2144 {
2145 struct net_device *dev = (struct net_device *) dev_instance;
2146 struct rtl8139_private *tp = netdev_priv(dev);
2147 void __iomem *ioaddr = tp->mmio_addr;
2148 u16 status, ackstat;
2149 int link_changed = 0; /* avoid bogus "uninit" warning */
2150 int handled = 0;
2151
2152 spin_lock (&tp->lock);
2153 status = RTL_R16 (IntrStatus);
2154
2155 /* shared irq? */
2156 if (unlikely((status & rtl8139_intr_mask) == 0))
2157 goto out;
2158
2159 handled = 1;
2160
2161 /* h/w no longer present (hotplug?) or major error, bail */
2162 if (unlikely(status == 0xFFFF))
2163 goto out;
2164
2165 /* close possible race's with dev_close */
2166 if (unlikely(!netif_running(dev))) {
2167 RTL_W16 (IntrMask, 0);
2168 goto out;
2169 }
2170
2171 /* Acknowledge all of the current interrupt sources ASAP, but
2172 an first get an additional status bit from CSCR. */
2173 if (unlikely(status & RxUnderrun))
2174 link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
2175
2176 ackstat = status & ~(RxAckBits | TxErr);
2177 if (ackstat)
2178 RTL_W16 (IntrStatus, ackstat);
2179
2180 /* Receive packets are processed by poll routine.
2181 If not running start it now. */
2182 if (status & RxAckBits){
2183 if (netif_rx_schedule_prep(dev)) {
2184 RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
2185 __netif_rx_schedule (dev);
2186 }
2187 }
2188
2189 /* Check uncommon events with one test. */
2190 if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
2191 rtl8139_weird_interrupt (dev, tp, ioaddr,
2192 status, link_changed);
2193
2194 if (status & (TxOK | TxErr)) {
2195 rtl8139_tx_interrupt (dev, tp, ioaddr);
2196 if (status & TxErr)
2197 RTL_W16 (IntrStatus, TxErr);
2198 }
2199 out:
2200 spin_unlock (&tp->lock);
2201
2202 DPRINTK ("%s: exiting interrupt, intr_status=%#4.4x.\n",
2203 dev->name, RTL_R16 (IntrStatus));
2204 return IRQ_RETVAL(handled);
2205 }
2206
2207 #ifdef CONFIG_NET_POLL_CONTROLLER
2208 /*
2209 * Polling receive - used by netconsole and other diagnostic tools
2210 * to allow network i/o with interrupts disabled.
2211 */
2212 static void rtl8139_poll_controller(struct net_device *dev)
2213 {
2214 disable_irq(dev->irq);
2215 rtl8139_interrupt(dev->irq, dev);
2216 enable_irq(dev->irq);
2217 }
2218 #endif
2219
2220 static int rtl8139_close (struct net_device *dev)
2221 {
2222 struct rtl8139_private *tp = netdev_priv(dev);
2223 void __iomem *ioaddr = tp->mmio_addr;
2224 unsigned long flags;
2225
2226 netif_stop_queue (dev);
2227
2228 if (netif_msg_ifdown(tp))
2229 printk(KERN_DEBUG "%s: Shutting down ethercard, status was 0x%4.4x.\n",
2230 dev->name, RTL_R16 (IntrStatus));
2231
2232 spin_lock_irqsave (&tp->lock, flags);
2233
2234 /* Stop the chip's Tx and Rx DMA processes. */
2235 RTL_W8 (ChipCmd, 0);
2236
2237 /* Disable interrupts by clearing the interrupt mask. */
2238 RTL_W16 (IntrMask, 0);
2239
2240 /* Update the error counts. */
2241 tp->stats.rx_missed_errors += RTL_R32 (RxMissed);
2242 RTL_W32 (RxMissed, 0);
2243
2244 spin_unlock_irqrestore (&tp->lock, flags);
2245
2246 synchronize_irq (dev->irq); /* racy, but that's ok here */
2247 free_irq (dev->irq, dev);
2248
2249 rtl8139_tx_clear (tp);
2250
2251 pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
2252 tp->rx_ring, tp->rx_ring_dma);
2253 pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
2254 tp->tx_bufs, tp->tx_bufs_dma);
2255 tp->rx_ring = NULL;
2256 tp->tx_bufs = NULL;
2257
2258 /* Green! Put the chip in low-power mode. */
2259 RTL_W8 (Cfg9346, Cfg9346_Unlock);
2260
2261 if (rtl_chip_info[tp->chipset].flags & HasHltClk)
2262 RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
2263
2264 return 0;
2265 }
2266
2267
2268 /* Get the ethtool Wake-on-LAN settings. Assumes that wol points to
2269 kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
2270 other threads or interrupts aren't messing with the 8139. */
2271 static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2272 {
2273 struct rtl8139_private *np = netdev_priv(dev);
2274 void __iomem *ioaddr = np->mmio_addr;
2275
2276 spin_lock_irq(&np->lock);
2277 if (rtl_chip_info[np->chipset].flags & HasLWake) {
2278 u8 cfg3 = RTL_R8 (Config3);
2279 u8 cfg5 = RTL_R8 (Config5);
2280
2281 wol->supported = WAKE_PHY | WAKE_MAGIC
2282 | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
2283
2284 wol->wolopts = 0;
2285 if (cfg3 & Cfg3_LinkUp)
2286 wol->wolopts |= WAKE_PHY;
2287 if (cfg3 & Cfg3_Magic)
2288 wol->wolopts |= WAKE_MAGIC;
2289 /* (KON)FIXME: See how netdev_set_wol() handles the
2290 following constants. */
2291 if (cfg5 & Cfg5_UWF)
2292 wol->wolopts |= WAKE_UCAST;
2293 if (cfg5 & Cfg5_MWF)
2294 wol->wolopts |= WAKE_MCAST;
2295 if (cfg5 & Cfg5_BWF)
2296 wol->wolopts |= WAKE_BCAST;
2297 }
2298 spin_unlock_irq(&np->lock);
2299 }
2300
2301
2302 /* Set the ethtool Wake-on-LAN settings. Return 0 or -errno. Assumes
2303 that wol points to kernel memory and other threads or interrupts
2304 aren't messing with the 8139. */
2305 static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2306 {
2307 struct rtl8139_private *np = netdev_priv(dev);
2308 void __iomem *ioaddr = np->mmio_addr;
2309 u32 support;
2310 u8 cfg3, cfg5;
2311
2312 support = ((rtl_chip_info[np->chipset].flags & HasLWake)
2313 ? (WAKE_PHY | WAKE_MAGIC
2314 | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
2315 : 0);
2316 if (wol->wolopts & ~support)
2317 return -EINVAL;
2318
2319 spin_lock_irq(&np->lock);
2320 cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
2321 if (wol->wolopts & WAKE_PHY)
2322 cfg3 |= Cfg3_LinkUp;
2323 if (wol->wolopts & WAKE_MAGIC)
2324 cfg3 |= Cfg3_Magic;
2325 RTL_W8 (Cfg9346, Cfg9346_Unlock);
2326 RTL_W8 (Config3, cfg3);
2327 RTL_W8 (Cfg9346, Cfg9346_Lock);
2328
2329 cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
2330 /* (KON)FIXME: These are untested. We may have to set the
2331 CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
2332 documentation. */
2333 if (wol->wolopts & WAKE_UCAST)
2334 cfg5 |= Cfg5_UWF;
2335 if (wol->wolopts & WAKE_MCAST)
2336 cfg5 |= Cfg5_MWF;
2337 if (wol->wolopts & WAKE_BCAST)
2338 cfg5 |= Cfg5_BWF;
2339 RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */
2340 spin_unlock_irq(&np->lock);
2341
2342 return 0;
2343 }
2344
2345 static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
2346 {
2347 struct rtl8139_private *np = netdev_priv(dev);
2348 strcpy(info->driver, DRV_NAME);
2349 strcpy(info->version, DRV_VERSION);
2350 strcpy(info->bus_info, pci_name(np->pci_dev));
2351 info->regdump_len = np->regs_len;
2352 }
2353
2354 static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
2355 {
2356 struct rtl8139_private *np = netdev_priv(dev);
2357 spin_lock_irq(&np->lock);
2358 mii_ethtool_gset(&np->mii, cmd);
2359 spin_unlock_irq(&np->lock);
2360 return 0;
2361 }
2362
2363 static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
2364 {
2365 struct rtl8139_private *np = netdev_priv(dev);
2366 int rc;
2367 spin_lock_irq(&np->lock);
2368 rc = mii_ethtool_sset(&np->mii, cmd);
2369 spin_unlock_irq(&np->lock);
2370 return rc;
2371 }
2372
2373 static int rtl8139_nway_reset(struct net_device *dev)
2374 {
2375 struct rtl8139_private *np = netdev_priv(dev);
2376 return mii_nway_restart(&np->mii);
2377 }
2378
2379 static u32 rtl8139_get_link(struct net_device *dev)
2380 {
2381 struct rtl8139_private *np = netdev_priv(dev);
2382 return mii_link_ok(&np->mii);
2383 }
2384
2385 static u32 rtl8139_get_msglevel(struct net_device *dev)
2386 {
2387 struct rtl8139_private *np = netdev_priv(dev);
2388 return np->msg_enable;
2389 }
2390
2391 static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
2392 {
2393 struct rtl8139_private *np = netdev_priv(dev);
2394 np->msg_enable = datum;
2395 }
2396
2397 /* TODO: we are too slack to do reg dumping for pio, for now */
2398 #ifdef CONFIG_8139TOO_PIO
2399 #define rtl8139_get_regs_len NULL
2400 #define rtl8139_get_regs NULL
2401 #else
2402 static int rtl8139_get_regs_len(struct net_device *dev)
2403 {
2404 struct rtl8139_private *np = netdev_priv(dev);
2405 return np->regs_len;
2406 }
2407
2408 static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
2409 {
2410 struct rtl8139_private *np = netdev_priv(dev);
2411
2412 regs->version = RTL_REGS_VER;
2413
2414 spin_lock_irq(&np->lock);
2415 memcpy_fromio(regbuf, np->mmio_addr, regs->len);
2416 spin_unlock_irq(&np->lock);
2417 }
2418 #endif /* CONFIG_8139TOO_MMIO */
2419
2420 static int rtl8139_get_stats_count(struct net_device *dev)
2421 {
2422 return RTL_NUM_STATS;
2423 }
2424
2425 static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
2426 {
2427 struct rtl8139_private *np = netdev_priv(dev);
2428
2429 data[0] = np->xstats.early_rx;
2430 data[1] = np->xstats.tx_buf_mapped;
2431 data[2] = np->xstats.tx_timeouts;
2432 data[3] = np->xstats.rx_lost_in_ring;
2433 }
2434
2435 static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
2436 {
2437 memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
2438 }
2439
2440 static const struct ethtool_ops rtl8139_ethtool_ops = {
2441 .get_drvinfo = rtl8139_get_drvinfo,
2442 .get_settings = rtl8139_get_settings,
2443 .set_settings = rtl8139_set_settings,
2444 .get_regs_len = rtl8139_get_regs_len,
2445 .get_regs = rtl8139_get_regs,
2446 .nway_reset = rtl8139_nway_reset,
2447 .get_link = rtl8139_get_link,
2448 .get_msglevel = rtl8139_get_msglevel,
2449 .set_msglevel = rtl8139_set_msglevel,
2450 .get_wol = rtl8139_get_wol,
2451 .set_wol = rtl8139_set_wol,
2452 .get_strings = rtl8139_get_strings,
2453 .get_stats_count = rtl8139_get_stats_count,
2454 .get_ethtool_stats = rtl8139_get_ethtool_stats,
2455 .get_perm_addr = ethtool_op_get_perm_addr,
2456 };
2457
2458 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2459 {
2460 struct rtl8139_private *np = netdev_priv(dev);
2461 int rc;
2462
2463 if (!netif_running(dev))
2464 return -EINVAL;
2465
2466 spin_lock_irq(&np->lock);
2467 rc = generic_mii_ioctl(&np->mii, if_mii(rq), cmd, NULL);
2468 spin_unlock_irq(&np->lock);
2469
2470 return rc;
2471 }
2472
2473
2474 static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
2475 {
2476 struct rtl8139_private *tp = netdev_priv(dev);
2477 void __iomem *ioaddr = tp->mmio_addr;
2478 unsigned long flags;
2479
2480 if (netif_running(dev)) {
2481 spin_lock_irqsave (&tp->lock, flags);
2482 tp->stats.rx_missed_errors += RTL_R32 (RxMissed);
2483 RTL_W32 (RxMissed, 0);
2484 spin_unlock_irqrestore (&tp->lock, flags);
2485 }
2486
2487 return &tp->stats;
2488 }
2489
2490 /* Set or clear the multicast filter for this adaptor.
2491 This routine is not state sensitive and need not be SMP locked. */
2492
2493 static void __set_rx_mode (struct net_device *dev)
2494 {
2495 struct rtl8139_private *tp = netdev_priv(dev);
2496 void __iomem *ioaddr = tp->mmio_addr;
2497 u32 mc_filter[2]; /* Multicast hash filter */
2498 int i, rx_mode;
2499 u32 tmp;
2500
2501 DPRINTK ("%s: rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
2502 dev->name, dev->flags, RTL_R32 (RxConfig));
2503
2504 /* Note: do not reorder, GCC is clever about common statements. */
2505 if (dev->flags & IFF_PROMISC) {
2506 rx_mode =
2507 AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
2508 AcceptAllPhys;
2509 mc_filter[1] = mc_filter[0] = 0xffffffff;
2510 } else if ((dev->mc_count > multicast_filter_limit)
2511 || (dev->flags & IFF_ALLMULTI)) {
2512 /* Too many to filter perfectly -- accept all multicasts. */
2513 rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
2514 mc_filter[1] = mc_filter[0] = 0xffffffff;
2515 } else {
2516 struct dev_mc_list *mclist;
2517 rx_mode = AcceptBroadcast | AcceptMyPhys;
2518 mc_filter[1] = mc_filter[0] = 0;
2519 for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
2520 i++, mclist = mclist->next) {
2521 int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
2522
2523 mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
2524 rx_mode |= AcceptMulticast;
2525 }
2526 }
2527
2528 /* We can safely update without stopping the chip. */
2529 tmp = rtl8139_rx_config | rx_mode;
2530 if (tp->rx_config != tmp) {
2531 RTL_W32_F (RxConfig, tmp);
2532 tp->rx_config = tmp;
2533 }
2534 RTL_W32_F (MAR0 + 0, mc_filter[0]);
2535 RTL_W32_F (MAR0 + 4, mc_filter[1]);
2536 }
2537
2538 static void rtl8139_set_rx_mode (struct net_device *dev)
2539 {
2540 unsigned long flags;
2541 struct rtl8139_private *tp = netdev_priv(dev);
2542
2543 spin_lock_irqsave (&tp->lock, flags);
2544 __set_rx_mode(dev);
2545 spin_unlock_irqrestore (&tp->lock, flags);
2546 }
2547
2548 #ifdef CONFIG_PM
2549
2550 static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
2551 {
2552 struct net_device *dev = pci_get_drvdata (pdev);
2553 struct rtl8139_private *tp = netdev_priv(dev);
2554 void __iomem *ioaddr = tp->mmio_addr;
2555 unsigned long flags;
2556
2557 pci_save_state (pdev);
2558
2559 if (!netif_running (dev))
2560 return 0;
2561
2562 netif_device_detach (dev);
2563
2564 spin_lock_irqsave (&tp->lock, flags);
2565
2566 /* Disable interrupts, stop Tx and Rx. */
2567 RTL_W16 (IntrMask, 0);
2568 RTL_W8 (ChipCmd, 0);
2569
2570 /* Update the error counts. */
2571 tp->stats.rx_missed_errors += RTL_R32 (RxMissed);
2572 RTL_W32 (RxMissed, 0);
2573
2574 spin_unlock_irqrestore (&tp->lock, flags);
2575
2576 pci_set_power_state (pdev, PCI_D3hot);
2577
2578 return 0;
2579 }
2580
2581
2582 static int rtl8139_resume (struct pci_dev *pdev)
2583 {
2584 struct net_device *dev = pci_get_drvdata (pdev);
2585
2586 pci_restore_state (pdev);
2587 if (!netif_running (dev))
2588 return 0;
2589 pci_set_power_state (pdev, PCI_D0);
2590 rtl8139_init_ring (dev);
2591 rtl8139_hw_start (dev);
2592 netif_device_attach (dev);
2593 return 0;
2594 }
2595
2596 #endif /* CONFIG_PM */
2597
2598
2599 static struct pci_driver rtl8139_pci_driver = {
2600 .name = DRV_NAME,
2601 .id_table = rtl8139_pci_tbl,
2602 .probe = rtl8139_init_one,
2603 .remove = __devexit_p(rtl8139_remove_one),
2604 #ifdef CONFIG_PM
2605 .suspend = rtl8139_suspend,
2606 .resume = rtl8139_resume,
2607 #endif /* CONFIG_PM */
2608 };
2609
2610
2611 static int __init rtl8139_init_module (void)
2612 {
2613 /* when we're a module, we always print a version message,
2614 * even if no 8139 board is found.
2615 */
2616 #ifdef MODULE
2617 printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
2618 #endif
2619
2620 return pci_register_driver(&rtl8139_pci_driver);
2621 }
2622
2623
2624 static void __exit rtl8139_cleanup_module (void)
2625 {
2626 pci_unregister_driver (&rtl8139_pci_driver);
2627 }
2628
2629
2630 module_init(rtl8139_init_module);
2631 module_exit(rtl8139_cleanup_module);
Software Suspend 2 for Linus's 2.6 head (mirror)