?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
[linux-2.6/trivial-mods.git] / include / linux / ide.h
blobc792b4fd1588f1b36c987ebebc45e25489de6021
1 #ifndef _IDE_H
2 #define _IDE_H
3 /*
4 * linux/include/linux/ide.h
5 *
6 * Copyright (C) 1994-2002 Linus Torvalds & authors
7 */
8
9 #include <linux/init.h>
10 #include <linux/ioport.h>
11 #include <linux/hdreg.h>
12 #include <linux/hdsmart.h>
13 #include <linux/blkdev.h>
14 #include <linux/proc_fs.h>
15 #include <linux/interrupt.h>
16 #include <linux/bitops.h>
17 #include <linux/bio.h>
18 #include <linux/device.h>
19 #include <linux/pci.h>
20 #include <linux/completion.h>
21 #ifdef CONFIG_BLK_DEV_IDEACPI
22 #include <acpi/acpi.h>
23 #endif
24 #include <asm/byteorder.h>
25 #include <asm/system.h>
26 #include <asm/io.h>
27 #include <asm/semaphore.h>
28 #include <asm/mutex.h>
29
30 /******************************************************************************
31 * IDE driver configuration options (play with these as desired):
32 *
33 * REALLY_SLOW_IO can be defined in ide.c and ide-cd.c, if necessary
34 */
35 #define INITIAL_MULT_COUNT 0 /* off=0; on=2,4,8,16,32, etc.. */
36
37 #ifndef SUPPORT_SLOW_DATA_PORTS /* 1 to support slow data ports */
38 #define SUPPORT_SLOW_DATA_PORTS 1 /* 0 to reduce kernel size */
39 #endif
40 #ifndef SUPPORT_VLB_SYNC /* 1 to support weird 32-bit chips */
41 #define SUPPORT_VLB_SYNC 1 /* 0 to reduce kernel size */
42 #endif
43 #ifndef OK_TO_RESET_CONTROLLER /* 1 needed for good error recovery */
44 #define OK_TO_RESET_CONTROLLER 1 /* 0 for use with AH2372A/B interface */
45 #endif
46
47 #ifndef DISABLE_IRQ_NOSYNC
48 #define DISABLE_IRQ_NOSYNC 0
49 #endif
50
51 /*
52 * Used to indicate "no IRQ", should be a value that cannot be an IRQ
53 * number.
54 */
55
56 #define IDE_NO_IRQ (-1)
57
58 /*
59 * "No user-serviceable parts" beyond this point :)
60 *****************************************************************************/
61
62 typedef unsigned char byte; /* used everywhere */
63
64 /*
65 * Probably not wise to fiddle with these
66 */
67 #define ERROR_MAX 8 /* Max read/write errors per sector */
68 #define ERROR_RESET 3 /* Reset controller every 4th retry */
69 #define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
70
71 /*
72 * Tune flags
73 */
74 #define IDE_TUNE_NOAUTO 2
75 #define IDE_TUNE_AUTO 1
76 #define IDE_TUNE_DEFAULT 0
77
78 /*
79 * state flags
80 */
81
82 #define DMA_PIO_RETRY 1 /* retrying in PIO */
83
84 #define HWIF(drive) ((ide_hwif_t *)((drive)->hwif))
85 #define HWGROUP(drive) ((ide_hwgroup_t *)(HWIF(drive)->hwgroup))
86
87 /*
88 * Definitions for accessing IDE controller registers
89 */
90 #define IDE_NR_PORTS (10)
91
92 #define IDE_DATA_OFFSET (0)
93 #define IDE_ERROR_OFFSET (1)
94 #define IDE_NSECTOR_OFFSET (2)
95 #define IDE_SECTOR_OFFSET (3)
96 #define IDE_LCYL_OFFSET (4)
97 #define IDE_HCYL_OFFSET (5)
98 #define IDE_SELECT_OFFSET (6)
99 #define IDE_STATUS_OFFSET (7)
100 #define IDE_CONTROL_OFFSET (8)
101 #define IDE_IRQ_OFFSET (9)
102
103 #define IDE_FEATURE_OFFSET IDE_ERROR_OFFSET
104 #define IDE_COMMAND_OFFSET IDE_STATUS_OFFSET
105
106 #define IDE_CONTROL_OFFSET_HOB (7)
107
108 #define IDE_DATA_REG (HWIF(drive)->io_ports[IDE_DATA_OFFSET])
109 #define IDE_ERROR_REG (HWIF(drive)->io_ports[IDE_ERROR_OFFSET])
110 #define IDE_NSECTOR_REG (HWIF(drive)->io_ports[IDE_NSECTOR_OFFSET])
111 #define IDE_SECTOR_REG (HWIF(drive)->io_ports[IDE_SECTOR_OFFSET])
112 #define IDE_LCYL_REG (HWIF(drive)->io_ports[IDE_LCYL_OFFSET])
113 #define IDE_HCYL_REG (HWIF(drive)->io_ports[IDE_HCYL_OFFSET])
114 #define IDE_SELECT_REG (HWIF(drive)->io_ports[IDE_SELECT_OFFSET])
115 #define IDE_STATUS_REG (HWIF(drive)->io_ports[IDE_STATUS_OFFSET])
116 #define IDE_CONTROL_REG (HWIF(drive)->io_ports[IDE_CONTROL_OFFSET])
117 #define IDE_IRQ_REG (HWIF(drive)->io_ports[IDE_IRQ_OFFSET])
118
119 #define IDE_FEATURE_REG IDE_ERROR_REG
120 #define IDE_COMMAND_REG IDE_STATUS_REG
121 #define IDE_ALTSTATUS_REG IDE_CONTROL_REG
122 #define IDE_IREASON_REG IDE_NSECTOR_REG
123 #define IDE_BCOUNTL_REG IDE_LCYL_REG
124 #define IDE_BCOUNTH_REG IDE_HCYL_REG
125
126 #define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
127 #define BAD_R_STAT (BUSY_STAT | ERR_STAT)
128 #define BAD_W_STAT (BAD_R_STAT | WRERR_STAT)
129 #define BAD_STAT (BAD_R_STAT | DRQ_STAT)
130 #define DRIVE_READY (READY_STAT | SEEK_STAT)
131 #define DATA_READY (DRQ_STAT)
132
133 #define BAD_CRC (ABRT_ERR | ICRC_ERR)
134
135 #define SATA_NR_PORTS (3) /* 16 possible ?? */
136
137 #define SATA_STATUS_OFFSET (0)
138 #define SATA_STATUS_REG (HWIF(drive)->sata_scr[SATA_STATUS_OFFSET])
139 #define SATA_ERROR_OFFSET (1)
140 #define SATA_ERROR_REG (HWIF(drive)->sata_scr[SATA_ERROR_OFFSET])
141 #define SATA_CONTROL_OFFSET (2)
142 #define SATA_CONTROL_REG (HWIF(drive)->sata_scr[SATA_CONTROL_OFFSET])
143
144 #define SATA_MISC_OFFSET (0)
145 #define SATA_MISC_REG (HWIF(drive)->sata_misc[SATA_MISC_OFFSET])
146 #define SATA_PHY_OFFSET (1)
147 #define SATA_PHY_REG (HWIF(drive)->sata_misc[SATA_PHY_OFFSET])
148 #define SATA_IEN_OFFSET (2)
149 #define SATA_IEN_REG (HWIF(drive)->sata_misc[SATA_IEN_OFFSET])
150
151 /*
152 * Our Physical Region Descriptor (PRD) table should be large enough
153 * to handle the biggest I/O request we are likely to see. Since requests
154 * can have no more than 256 sectors, and since the typical blocksize is
155 * two or more sectors, we could get by with a limit of 128 entries here for
156 * the usual worst case. Most requests seem to include some contiguous blocks,
157 * further reducing the number of table entries required.
158 *
159 * The driver reverts to PIO mode for individual requests that exceed
160 * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
161 * 100% of all crazy scenarios here is not necessary.
162 *
163 * As it turns out though, we must allocate a full 4KB page for this,
164 * so the two PRD tables (ide0 & ide1) will each get half of that,
165 * allowing each to have about 256 entries (8 bytes each) from this.
166 */
167 #define PRD_BYTES 8
168 #define PRD_ENTRIES 256
169
170 /*
171 * Some more useful definitions
172 */
173 #define PARTN_BITS 6 /* number of minor dev bits for partitions */
174 #define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
175 #define SECTOR_SIZE 512
176 #define SECTOR_WORDS (SECTOR_SIZE / 4) /* number of 32bit words per sector */
177 #define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))
178
179 /*
180 * Timeouts for various operations:
181 */
182 #define WAIT_DRQ (HZ/10) /* 100msec - spec allows up to 20ms */
183 #define WAIT_READY (5*HZ) /* 5sec - some laptops are very slow */
184 #define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */
185 #define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */
186 #define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */
187 #define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
188
189 /*
190 * Check for an interrupt and acknowledge the interrupt status
191 */
192 struct hwif_s;
193 typedef int (ide_ack_intr_t)(struct hwif_s *);
194
195 #ifndef NO_DMA
196 #define NO_DMA 255
197 #endif
198
199 /*
200 * hwif_chipset_t is used to keep track of the specific hardware
201 * chipset used by each IDE interface, if known.
202 */
203 typedef enum { ide_unknown, ide_generic, ide_pci,
204 ide_cmd640, ide_dtc2278, ide_ali14xx,
205 ide_qd65xx, ide_umc8672, ide_ht6560b,
206 ide_rz1000, ide_trm290,
207 ide_cmd646, ide_cy82c693, ide_4drives,
208 ide_pmac, ide_etrax100, ide_acorn,
209 ide_au1xxx, ide_forced
210 } hwif_chipset_t;
211
212 /*
213 * Structure to hold all information about the location of this port
214 */
215 typedef struct hw_regs_s {
216 unsigned long io_ports[IDE_NR_PORTS]; /* task file registers */
217 int irq; /* our irq number */
218 int dma; /* our dma entry */
219 ide_ack_intr_t *ack_intr; /* acknowledge interrupt */
220 hwif_chipset_t chipset;
221 struct device *dev;
222 } hw_regs_t;
223
224 /*
225 * Register new hardware with ide
226 */
227 int ide_register_hw(hw_regs_t *, int, struct hwif_s **);
228 int ide_register_hw_with_fixup(hw_regs_t *, int, struct hwif_s **,
229 void (*)(struct hwif_s *));
230
231 /*
232 * Set up hw_regs_t structure before calling ide_register_hw (optional)
233 */
234 void ide_setup_ports( hw_regs_t *hw,
235 unsigned long base,
236 int *offsets,
237 unsigned long ctrl,
238 unsigned long intr,
239 ide_ack_intr_t *ack_intr,
240 #if 0
241 ide_io_ops_t *iops,
242 #endif
243 int irq);
244
245 static inline void ide_std_init_ports(hw_regs_t *hw,
246 unsigned long io_addr,
247 unsigned long ctl_addr)
248 {
249 unsigned int i;
250
251 for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
252 hw->io_ports[i] = io_addr++;
253
254 hw->io_ports[IDE_CONTROL_OFFSET] = ctl_addr;
255 }
256
257 #include <asm/ide.h>
258
259 #if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
260 #undef MAX_HWIFS
261 #define MAX_HWIFS CONFIG_IDE_MAX_HWIFS
262 #endif
263
264 /* needed on alpha, x86/x86_64, ia64, mips, ppc32 and sh */
265 #ifndef IDE_ARCH_OBSOLETE_DEFAULTS
266 # define ide_default_io_base(index) (0)
267 # define ide_default_irq(base) (0)
268 # define ide_init_default_irq(base) (0)
269 #endif
270
271 /*
272 * ide_init_hwif_ports() is OBSOLETE and will be removed in 2.7 series.
273 * New ports shouldn't define IDE_ARCH_OBSOLETE_INIT in <asm/ide.h>.
274 */
275 #ifdef IDE_ARCH_OBSOLETE_INIT
276 static inline void ide_init_hwif_ports(hw_regs_t *hw,
277 unsigned long io_addr,
278 unsigned long ctl_addr,
279 int *irq)
280 {
281 if (!ctl_addr)
282 ide_std_init_ports(hw, io_addr, ide_default_io_ctl(io_addr));
283 else
284 ide_std_init_ports(hw, io_addr, ctl_addr);
285
286 if (irq)
287 *irq = 0;
288
289 hw->io_ports[IDE_IRQ_OFFSET] = 0;
290
291 #ifdef CONFIG_PPC32
292 if (ppc_ide_md.ide_init_hwif)
293 ppc_ide_md.ide_init_hwif(hw, io_addr, ctl_addr, irq);
294 #endif
295 }
296 #else
297 static inline void ide_init_hwif_ports(hw_regs_t *hw,
298 unsigned long io_addr,
299 unsigned long ctl_addr,
300 int *irq)
301 {
302 if (io_addr || ctl_addr)
303 printk(KERN_WARNING "%s: must not be called\n", __FUNCTION__);
304 }
305 #endif /* IDE_ARCH_OBSOLETE_INIT */
306
307 /* Currently only m68k, apus and m8xx need it */
308 #ifndef IDE_ARCH_ACK_INTR
309 # define ide_ack_intr(hwif) (1)
310 #endif
311
312 /* Currently only Atari needs it */
313 #ifndef IDE_ARCH_LOCK
314 # define ide_release_lock() do {} while (0)
315 # define ide_get_lock(hdlr, data) do {} while (0)
316 #endif /* IDE_ARCH_LOCK */
317
318 /*
319 * Now for the data we need to maintain per-drive: ide_drive_t
320 */
321
322 #define ide_scsi 0x21
323 #define ide_disk 0x20
324 #define ide_optical 0x7
325 #define ide_cdrom 0x5
326 #define ide_tape 0x1
327 #define ide_floppy 0x0
328
329 /*
330 * Special Driver Flags
331 *
332 * set_geometry : respecify drive geometry
333 * recalibrate : seek to cyl 0
334 * set_multmode : set multmode count
335 * set_tune : tune interface for drive
336 * serviced : service command
337 * reserved : unused
338 */
339 typedef union {
340 unsigned all : 8;
341 struct {
342 #if defined(__LITTLE_ENDIAN_BITFIELD)
343 unsigned set_geometry : 1;
344 unsigned recalibrate : 1;
345 unsigned set_multmode : 1;
346 unsigned set_tune : 1;
347 unsigned serviced : 1;
348 unsigned reserved : 3;
349 #elif defined(__BIG_ENDIAN_BITFIELD)
350 unsigned reserved : 3;
351 unsigned serviced : 1;
352 unsigned set_tune : 1;
353 unsigned set_multmode : 1;
354 unsigned recalibrate : 1;
355 unsigned set_geometry : 1;
356 #else
357 #error "Please fix <asm/byteorder.h>"
358 #endif
359 } b;
360 } special_t;
361
362 /*
363 * ATA DATA Register Special.
364 * ATA NSECTOR Count Register().
365 * ATAPI Byte Count Register.
366 * Channel index ordering pairs.
367 */
368 typedef union {
369 unsigned all :16;
370 struct {
371 #if defined(__LITTLE_ENDIAN_BITFIELD)
372 unsigned low :8; /* LSB */
373 unsigned high :8; /* MSB */
374 #elif defined(__BIG_ENDIAN_BITFIELD)
375 unsigned high :8; /* MSB */
376 unsigned low :8; /* LSB */
377 #else
378 #error "Please fix <asm/byteorder.h>"
379 #endif
380 } b;
381 } ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t;
382
383 /*
384 * ATA-IDE Select Register, aka Device-Head
385 *
386 * head : always zeros here
387 * unit : drive select number: 0/1
388 * bit5 : always 1
389 * lba : using LBA instead of CHS
390 * bit7 : always 1
391 */
392 typedef union {
393 unsigned all : 8;
394 struct {
395 #if defined(__LITTLE_ENDIAN_BITFIELD)
396 unsigned head : 4;
397 unsigned unit : 1;
398 unsigned bit5 : 1;
399 unsigned lba : 1;
400 unsigned bit7 : 1;
401 #elif defined(__BIG_ENDIAN_BITFIELD)
402 unsigned bit7 : 1;
403 unsigned lba : 1;
404 unsigned bit5 : 1;
405 unsigned unit : 1;
406 unsigned head : 4;
407 #else
408 #error "Please fix <asm/byteorder.h>"
409 #endif
410 } b;
411 } select_t, ata_select_t;
412
413 /*
414 * The ATA-IDE Status Register.
415 * The ATAPI Status Register.
416 *
417 * check : Error occurred
418 * idx : Index Error
419 * corr : Correctable error occurred
420 * drq : Data is request by the device
421 * dsc : Disk Seek Complete : ata
422 * : Media access command finished : atapi
423 * df : Device Fault : ata
424 * : Reserved : atapi
425 * drdy : Ready, Command Mode Capable : ata
426 * : Ignored for ATAPI commands : atapi
427 * bsy : Disk is Busy
428 * : The device has access to the command block
429 */
430 typedef union {
431 unsigned all :8;
432 struct {
433 #if defined(__LITTLE_ENDIAN_BITFIELD)
434 unsigned check :1;
435 unsigned idx :1;
436 unsigned corr :1;
437 unsigned drq :1;
438 unsigned dsc :1;
439 unsigned df :1;
440 unsigned drdy :1;
441 unsigned bsy :1;
442 #elif defined(__BIG_ENDIAN_BITFIELD)
443 unsigned bsy :1;
444 unsigned drdy :1;
445 unsigned df :1;
446 unsigned dsc :1;
447 unsigned drq :1;
448 unsigned corr :1;
449 unsigned idx :1;
450 unsigned check :1;
451 #else
452 #error "Please fix <asm/byteorder.h>"
453 #endif
454 } b;
455 } ata_status_t, atapi_status_t;
456
457 /*
458 * ATAPI Feature Register
459 *
460 * dma : Using DMA or PIO
461 * reserved321 : Reserved
462 * reserved654 : Reserved (Tag Type)
463 * reserved7 : Reserved
464 */
465 typedef union {
466 unsigned all :8;
467 struct {
468 #if defined(__LITTLE_ENDIAN_BITFIELD)
469 unsigned dma :1;
470 unsigned reserved321 :3;
471 unsigned reserved654 :3;
472 unsigned reserved7 :1;
473 #elif defined(__BIG_ENDIAN_BITFIELD)
474 unsigned reserved7 :1;
475 unsigned reserved654 :3;
476 unsigned reserved321 :3;
477 unsigned dma :1;
478 #else
479 #error "Please fix <asm/byteorder.h>"
480 #endif
481 } b;
482 } atapi_feature_t;
483
484 /*
485 * ATAPI Interrupt Reason Register.
486 *
487 * cod : Information transferred is command (1) or data (0)
488 * io : The device requests us to read (1) or write (0)
489 * reserved : Reserved
490 */
491 typedef union {
492 unsigned all :8;
493 struct {
494 #if defined(__LITTLE_ENDIAN_BITFIELD)
495 unsigned cod :1;
496 unsigned io :1;
497 unsigned reserved :6;
498 #elif defined(__BIG_ENDIAN_BITFIELD)
499 unsigned reserved :6;
500 unsigned io :1;
501 unsigned cod :1;
502 #else
503 #error "Please fix <asm/byteorder.h>"
504 #endif
505 } b;
506 } atapi_ireason_t;
507
508 /*
509 * The ATAPI error register.
510 *
511 * ili : Illegal Length Indication
512 * eom : End Of Media Detected
513 * abrt : Aborted command - As defined by ATA
514 * mcr : Media Change Requested - As defined by ATA
515 * sense_key : Sense key of the last failed packet command
516 */
517 typedef union {
518 unsigned all :8;
519 struct {
520 #if defined(__LITTLE_ENDIAN_BITFIELD)
521 unsigned ili :1;
522 unsigned eom :1;
523 unsigned abrt :1;
524 unsigned mcr :1;
525 unsigned sense_key :4;
526 #elif defined(__BIG_ENDIAN_BITFIELD)
527 unsigned sense_key :4;
528 unsigned mcr :1;
529 unsigned abrt :1;
530 unsigned eom :1;
531 unsigned ili :1;
532 #else
533 #error "Please fix <asm/byteorder.h>"
534 #endif
535 } b;
536 } atapi_error_t;
537
538 /*
539 * Status returned from various ide_ functions
540 */
541 typedef enum {
542 ide_stopped, /* no drive operation was started */
543 ide_started, /* a drive operation was started, handler was set */
544 } ide_startstop_t;
545
546 struct ide_driver_s;
547 struct ide_settings_s;
548
549 #ifdef CONFIG_BLK_DEV_IDEACPI
550 struct ide_acpi_drive_link;
551 struct ide_acpi_hwif_link;
552 #endif
553
554 typedef struct ide_drive_s {
555 char name[4]; /* drive name, such as "hda" */
556 char driver_req[10]; /* requests specific driver */
557
558 struct request_queue *queue; /* request queue */
559
560 struct request *rq; /* current request */
561 struct ide_drive_s *next; /* circular list of hwgroup drives */
562 void *driver_data; /* extra driver data */
563 struct hd_driveid *id; /* drive model identification info */
564 #ifdef CONFIG_IDE_PROC_FS
565 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
566 struct ide_settings_s *settings;/* /proc/ide/ drive settings */
567 #endif
568 struct hwif_s *hwif; /* actually (ide_hwif_t *) */
569
570 unsigned long sleep; /* sleep until this time */
571 unsigned long service_start; /* time we started last request */
572 unsigned long service_time; /* service time of last request */
573 unsigned long timeout; /* max time to wait for irq */
574
575 special_t special; /* special action flags */
576 select_t select; /* basic drive/head select reg value */
577
578 u8 keep_settings; /* restore settings after drive reset */
579 u8 autodma; /* device can safely use dma on host */
580 u8 using_dma; /* disk is using dma for read/write */
581 u8 retry_pio; /* retrying dma capable host in pio */
582 u8 state; /* retry state */
583 u8 waiting_for_dma; /* dma currently in progress */
584 u8 unmask; /* okay to unmask other irqs */
585 u8 bswap; /* byte swap data */
586 u8 noflush; /* don't attempt flushes */
587 u8 dsc_overlap; /* DSC overlap */
588 u8 nice1; /* give potential excess bandwidth */
589
590 unsigned present : 1; /* drive is physically present */
591 unsigned dead : 1; /* device ejected hint */
592 unsigned id_read : 1; /* 1=id read from disk 0 = synthetic */
593 unsigned noprobe : 1; /* from: hdx=noprobe */
594 unsigned removable : 1; /* 1 if need to do check_media_change */
595 unsigned attach : 1; /* needed for removable devices */
596 unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */
597 unsigned no_unmask : 1; /* disallow setting unmask bit */
598 unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
599 unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */
600 unsigned nice0 : 1; /* give obvious excess bandwidth */
601 unsigned nice2 : 1; /* give a share in our own bandwidth */
602 unsigned doorlocking : 1; /* for removable only: door lock/unlock works */
603 unsigned autotune : 2; /* 0=default, 1=autotune, 2=noautotune */
604 unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */
605 unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
606 unsigned vdma : 1; /* 1=doing PIO over DMA 0=doing normal DMA */
607 unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */
608 unsigned sleeping : 1; /* 1=sleeping & sleep field valid */
609 unsigned post_reset : 1;
610 unsigned udma33_warned : 1;
611
612 u8 addressing; /* 0=28-bit, 1=48-bit, 2=48-bit doing 28-bit */
613 u8 quirk_list; /* considered quirky, set for a specific host */
614 u8 init_speed; /* transfer rate set at boot */
615 u8 current_speed; /* current transfer rate set */
616 u8 desired_speed; /* desired transfer rate set */
617 u8 dn; /* now wide spread use */
618 u8 wcache; /* status of write cache */
619 u8 acoustic; /* acoustic management */
620 u8 media; /* disk, cdrom, tape, floppy, ... */
621 u8 ctl; /* "normal" value for IDE_CONTROL_REG */
622 u8 ready_stat; /* min status value for drive ready */
623 u8 mult_count; /* current multiple sector setting */
624 u8 mult_req; /* requested multiple sector setting */
625 u8 tune_req; /* requested drive tuning setting */
626 u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
627 u8 bad_wstat; /* used for ignoring WRERR_STAT */
628 u8 nowerr; /* used for ignoring WRERR_STAT */
629 u8 sect0; /* offset of first sector for DM6:DDO */
630 u8 head; /* "real" number of heads */
631 u8 sect; /* "real" sectors per track */
632 u8 bios_head; /* BIOS/fdisk/LILO number of heads */
633 u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */
634
635 unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
636 unsigned int cyl; /* "real" number of cyls */
637 unsigned int drive_data; /* use by tuneproc/selectproc */
638 unsigned int failures; /* current failure count */
639 unsigned int max_failures; /* maximum allowed failure count */
640 u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */
641
642 u64 capacity64; /* total number of sectors */
643
644 int lun; /* logical unit */
645 int crc_count; /* crc counter to reduce drive speed */
646 #ifdef CONFIG_BLK_DEV_IDEACPI
647 struct ide_acpi_drive_link *acpidata;
648 #endif
649 struct list_head list;
650 struct device gendev;
651 struct completion gendev_rel_comp; /* to deal with device release() */
652 } ide_drive_t;
653
654 #define to_ide_device(dev)container_of(dev, ide_drive_t, gendev)
655
656 #define IDE_CHIPSET_PCI_MASK \
657 ((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
658 #define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
659
660 struct ide_pci_device_s;
661
662 typedef struct hwif_s {
663 struct hwif_s *next; /* for linked-list in ide_hwgroup_t */
664 struct hwif_s *mate; /* other hwif from same PCI chip */
665 struct hwgroup_s *hwgroup; /* actually (ide_hwgroup_t *) */
666 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
667
668 char name[6]; /* name of interface, eg. "ide0" */
669
670 /* task file registers for pata and sata */
671 unsigned long io_ports[IDE_NR_PORTS];
672 unsigned long sata_scr[SATA_NR_PORTS];
673 unsigned long sata_misc[SATA_NR_PORTS];
674
675 hw_regs_t hw; /* Hardware info */
676 ide_drive_t drives[MAX_DRIVES]; /* drive info */
677
678 u8 major; /* our major number */
679 u8 index; /* 0 for ide0; 1 for ide1; ... */
680 u8 channel; /* for dual-port chips: 0=primary, 1=secondary */
681 u8 straight8; /* Alan's straight 8 check */
682 u8 bus_state; /* power state of the IDE bus */
683
684 u8 host_flags;
685
686 u8 pio_mask;
687
688 u8 atapi_dma; /* host supports atapi_dma */
689 u8 ultra_mask;
690 u8 mwdma_mask;
691 u8 swdma_mask;
692
693 u8 cbl; /* cable type */
694
695 hwif_chipset_t chipset; /* sub-module for tuning.. */
696
697 struct pci_dev *pci_dev; /* for pci chipsets */
698 struct ide_pci_device_s *cds; /* chipset device struct */
699
700 void (*rw_disk)(ide_drive_t *, struct request *);
701
702 #if 0
703 ide_hwif_ops_t *hwifops;
704 #else
705 /* routine to tune PIO mode for drives */
706 void (*tuneproc)(ide_drive_t *, u8);
707 /* routine to retune DMA modes for drives */
708 int (*speedproc)(ide_drive_t *, u8);
709 /* tweaks hardware to select drive */
710 void (*selectproc)(ide_drive_t *);
711 /* chipset polling based on hba specifics */
712 int (*reset_poll)(ide_drive_t *);
713 /* chipset specific changes to default for device-hba resets */
714 void (*pre_reset)(ide_drive_t *);
715 /* routine to reset controller after a disk reset */
716 void (*resetproc)(ide_drive_t *);
717 /* special interrupt handling for shared pci interrupts */
718 void (*intrproc)(ide_drive_t *);
719 /* special host masking for drive selection */
720 void (*maskproc)(ide_drive_t *, int);
721 /* check host's drive quirk list */
722 int (*quirkproc)(ide_drive_t *);
723 /* driver soft-power interface */
724 int (*busproc)(ide_drive_t *, int);
725 #endif
726 u8 (*udma_filter)(ide_drive_t *);
727
728 void (*ata_input_data)(ide_drive_t *, void *, u32);
729 void (*ata_output_data)(ide_drive_t *, void *, u32);
730
731 void (*atapi_input_bytes)(ide_drive_t *, void *, u32);
732 void (*atapi_output_bytes)(ide_drive_t *, void *, u32);
733
734 int (*dma_setup)(ide_drive_t *);
735 void (*dma_exec_cmd)(ide_drive_t *, u8);
736 void (*dma_start)(ide_drive_t *);
737 int (*ide_dma_end)(ide_drive_t *drive);
738 int (*ide_dma_check)(ide_drive_t *drive);
739 int (*ide_dma_on)(ide_drive_t *drive);
740 void (*dma_off_quietly)(ide_drive_t *drive);
741 int (*ide_dma_test_irq)(ide_drive_t *drive);
742 void (*ide_dma_clear_irq)(ide_drive_t *drive);
743 void (*dma_host_on)(ide_drive_t *drive);
744 void (*dma_host_off)(ide_drive_t *drive);
745 void (*dma_lost_irq)(ide_drive_t *drive);
746 void (*dma_timeout)(ide_drive_t *drive);
747
748 void (*OUTB)(u8 addr, unsigned long port);
749 void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
750 void (*OUTW)(u16 addr, unsigned long port);
751 void (*OUTSW)(unsigned long port, void *addr, u32 count);
752 void (*OUTSL)(unsigned long port, void *addr, u32 count);
753
754 u8 (*INB)(unsigned long port);
755 u16 (*INW)(unsigned long port);
756 void (*INSW)(unsigned long port, void *addr, u32 count);
757 void (*INSL)(unsigned long port, void *addr, u32 count);
758
759 /* dma physical region descriptor table (cpu view) */
760 unsigned int *dmatable_cpu;
761 /* dma physical region descriptor table (dma view) */
762 dma_addr_t dmatable_dma;
763 /* Scatter-gather list used to build the above */
764 struct scatterlist *sg_table;
765 int sg_max_nents; /* Maximum number of entries in it */
766 int sg_nents; /* Current number of entries in it */
767 int sg_dma_direction; /* dma transfer direction */
768
769 /* data phase of the active command (currently only valid for PIO/DMA) */
770 int data_phase;
771
772 unsigned int nsect;
773 unsigned int nleft;
774 unsigned int cursg;
775 unsigned int cursg_ofs;
776
777 int rqsize; /* max sectors per request */
778 int irq; /* our irq number */
779
780 unsigned long dma_master; /* reference base addr dmabase */
781 unsigned long dma_base; /* base addr for dma ports */
782 unsigned long dma_command; /* dma command register */
783 unsigned long dma_vendor1; /* dma vendor 1 register */
784 unsigned long dma_status; /* dma status register */
785 unsigned long dma_vendor3; /* dma vendor 3 register */
786 unsigned long dma_prdtable; /* actual prd table address */
787
788 unsigned long config_data; /* for use by chipset-specific code */
789 unsigned long select_data; /* for use by chipset-specific code */
790
791 unsigned long extra_base; /* extra addr for dma ports */
792 unsigned extra_ports; /* number of extra dma ports */
793
794 unsigned noprobe : 1; /* don't probe for this interface */
795 unsigned present : 1; /* this interface exists */
796 unsigned hold : 1; /* this interface is always present */
797 unsigned serialized : 1; /* serialized all channel operation */
798 unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
799 unsigned reset : 1; /* reset after probe */
800 unsigned autodma : 1; /* auto-attempt using DMA at boot */
801 unsigned no_lba48 : 1; /* 1 = cannot do LBA48 */
802 unsigned no_lba48_dma : 1; /* 1 = cannot do LBA48 DMA */
803 unsigned auto_poll : 1; /* supports nop auto-poll */
804 unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
805 unsigned no_io_32bit : 1; /* 1 = can not do 32-bit IO ops */
806 unsigned err_stops_fifo : 1; /* 1=data FIFO is cleared by an error */
807 unsigned mmio : 1; /* host uses MMIO */
808
809 struct device gendev;
810 struct completion gendev_rel_comp; /* To deal with device release() */
811
812 void *hwif_data; /* extra hwif data */
813
814 unsigned dma;
815
816 #ifdef CONFIG_BLK_DEV_IDEACPI
817 struct ide_acpi_hwif_link *acpidata;
818 #endif
819 } ____cacheline_internodealigned_in_smp ide_hwif_t;
820
821 /*
822 * internal ide interrupt handler type
823 */
824 typedef ide_startstop_t (ide_pre_handler_t)(ide_drive_t *, struct request *);
825 typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
826 typedef int (ide_expiry_t)(ide_drive_t *);
827
828 typedef struct hwgroup_s {
829 /* irq handler, if active */
830 ide_startstop_t (*handler)(ide_drive_t *);
831 /* irq handler, suspended if active */
832 ide_startstop_t (*handler_save)(ide_drive_t *);
833 /* BOOL: protects all fields below */
834 volatile int busy;
835 /* BOOL: wake us up on timer expiry */
836 unsigned int sleeping : 1;
837 /* BOOL: polling active & poll_timeout field valid */
838 unsigned int polling : 1;
839 /* BOOL: in a polling reset situation. Must not trigger another reset yet */
840 unsigned int resetting : 1;
841
842 /* current drive */
843 ide_drive_t *drive;
844 /* ptr to current hwif in linked-list */
845 ide_hwif_t *hwif;
846
847 /* for pci chipsets */
848 struct pci_dev *pci_dev;
849 /* chipset device struct */
850 struct ide_pci_device_s *cds;
851
852 /* current request */
853 struct request *rq;
854 /* failsafe timer */
855 struct timer_list timer;
856 /* local copy of current write rq */
857 struct request wrq;
858 /* timeout value during long polls */
859 unsigned long poll_timeout;
860 /* queried upon timeouts */
861 int (*expiry)(ide_drive_t *);
862 /* ide_system_bus_speed */
863 int pio_clock;
864 int req_gen;
865 int req_gen_timer;
866
867 unsigned char cmd_buf[4];
868 } ide_hwgroup_t;
869
870 typedef struct ide_driver_s ide_driver_t;
871
872 extern struct mutex ide_setting_mtx;
873
874 int set_io_32bit(ide_drive_t *, int);
875 int set_pio_mode(ide_drive_t *, int);
876 int set_using_dma(ide_drive_t *, int);
877
878 #ifdef CONFIG_IDE_PROC_FS
879 /*
880 * configurable drive settings
881 */
882
883 #define TYPE_INT 0
884 #define TYPE_BYTE 1
885 #define TYPE_SHORT 2
886
887 #define SETTING_READ (1 << 0)
888 #define SETTING_WRITE (1 << 1)
889 #define SETTING_RW (SETTING_READ | SETTING_WRITE)
890
891 typedef int (ide_procset_t)(ide_drive_t *, int);
892 typedef struct ide_settings_s {
893 char *name;
894 int rw;
895 int data_type;
896 int min;
897 int max;
898 int mul_factor;
899 int div_factor;
900 void *data;
901 ide_procset_t *set;
902 int auto_remove;
903 struct ide_settings_s *next;
904 } ide_settings_t;
905
906 int ide_add_setting(ide_drive_t *, const char *, int, int, int, int, int, int, void *, ide_procset_t *set);
907
908 /*
909 * /proc/ide interface
910 */
911 typedef struct {
912 const char *name;
913 mode_t mode;
914 read_proc_t *read_proc;
915 write_proc_t *write_proc;
916 } ide_proc_entry_t;
917
918 void proc_ide_create(void);
919 void proc_ide_destroy(void);
920 void ide_proc_register_port(ide_hwif_t *);
921 void ide_proc_unregister_port(ide_hwif_t *);
922 void ide_proc_register_driver(ide_drive_t *, ide_driver_t *);
923 void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *);
924
925 void ide_add_generic_settings(ide_drive_t *);
926
927 read_proc_t proc_ide_read_capacity;
928 read_proc_t proc_ide_read_geometry;
929
930 #ifdef CONFIG_BLK_DEV_IDEPCI
931 void ide_pci_create_host_proc(const char *, get_info_t *);
932 #endif
933
934 /*
935 * Standard exit stuff:
936 */
937 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
938 { \
939 len -= off; \
940 if (len < count) { \
941 *eof = 1; \
942 if (len <= 0) \
943 return 0; \
944 } else \
945 len = count; \
946 *start = page + off; \
947 return len; \
948 }
949 #else
950 static inline void proc_ide_create(void) { ; }
951 static inline void proc_ide_destroy(void) { ; }
952 static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
953 static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
954 static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
955 static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
956 static inline void ide_add_generic_settings(ide_drive_t *drive) { ; }
957 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
958 #endif
959
960 /*
961 * Power Management step value (rq->pm->pm_step).
962 *
963 * The step value starts at 0 (ide_pm_state_start_suspend) for a
964 * suspend operation or 1000 (ide_pm_state_start_resume) for a
965 * resume operation.
966 *
967 * For each step, the core calls the subdriver start_power_step() first.
968 * This can return:
969 * - ide_stopped : In this case, the core calls us back again unless
970 * step have been set to ide_power_state_completed.
971 * - ide_started : In this case, the channel is left busy until an
972 * async event (interrupt) occurs.
973 * Typically, start_power_step() will issue a taskfile request with
974 * do_rw_taskfile().
975 *
976 * Upon reception of the interrupt, the core will call complete_power_step()
977 * with the error code if any. This routine should update the step value
978 * and return. It should not start a new request. The core will call
979 * start_power_step for the new step value, unless step have been set to
980 * ide_power_state_completed.
981 *
982 * Subdrivers are expected to define their own additional power
983 * steps from 1..999 for suspend and from 1001..1999 for resume,
984 * other values are reserved for future use.
985 */
986
987 enum {
988 ide_pm_state_completed = -1,
989 ide_pm_state_start_suspend = 0,
990 ide_pm_state_start_resume = 1000,
991 };
992
993 /*
994 * Subdrivers support.
995 *
996 * The gendriver.owner field should be set to the module owner of this driver.
997 * The gendriver.name field should be set to the name of this driver
998 */
999 struct ide_driver_s {
1000 const char *version;
1001 u8 media;
1002 unsigned supports_dsc_overlap : 1;
1003 ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
1004 int (*end_request)(ide_drive_t *, int, int);
1005 ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
1006 ide_startstop_t (*abort)(ide_drive_t *, struct request *rq);
1007 struct device_driver gen_driver;
1008 int (*probe)(ide_drive_t *);
1009 void (*remove)(ide_drive_t *);
1010 void (*resume)(ide_drive_t *);
1011 void (*shutdown)(ide_drive_t *);
1012 #ifdef CONFIG_IDE_PROC_FS
1013 ide_proc_entry_t *proc;
1014 #endif
1015 };
1016
1017 #define to_ide_driver(drv) container_of(drv, ide_driver_t, gen_driver)
1018
1019 int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
1020
1021 /*
1022 * ide_hwifs[] is the master data structure used to keep track
1023 * of just about everything in ide.c. Whenever possible, routines
1024 * should be using pointers to a drive (ide_drive_t *) or
1025 * pointers to a hwif (ide_hwif_t *), rather than indexing this
1026 * structure directly (the allocation/layout may change!).
1027 *
1028 */
1029 #ifndef _IDE_C
1030 extern ide_hwif_t ide_hwifs[]; /* master data repository */
1031 #endif
1032 extern int noautodma;
1033
1034 extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
1035 int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
1036 int uptodate, int nr_sectors);
1037
1038 /*
1039 * This is used on exit from the driver to designate the next irq handler
1040 * and also to start the safety timer.
1041 */
1042 extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry);
1043
1044 /*
1045 * This is used on exit from the driver to designate the next irq handler
1046 * and start the safety time safely and atomically from the IRQ handler
1047 * with respect to the command issue (which it also does)
1048 */
1049 extern void ide_execute_command(ide_drive_t *, task_ioreg_t cmd, ide_handler_t *, unsigned int, ide_expiry_t *);
1050
1051 ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
1052
1053 /*
1054 * ide_error() takes action based on the error returned by the controller.
1055 * The caller should return immediately after invoking this.
1056 *
1057 * (drive, msg, status)
1058 */
1059 ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
1060
1061 ide_startstop_t __ide_abort(ide_drive_t *, struct request *);
1062
1063 /*
1064 * Abort a running command on the controller triggering the abort
1065 * from a host side, non error situation
1066 * (drive, msg)
1067 */
1068 extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
1069
1070 extern void ide_fix_driveid(struct hd_driveid *);
1071 /*
1072 * ide_fixstring() cleans up and (optionally) byte-swaps a text string,
1073 * removing leading/trailing blanks and compressing internal blanks.
1074 * It is primarily used to tidy up the model name/number fields as
1075 * returned by the WIN_[P]IDENTIFY commands.
1076 *
1077 * (s, bytecount, byteswap)
1078 */
1079 extern void ide_fixstring(u8 *, const int, const int);
1080
1081 /*
1082 * This routine busy-waits for the drive status to be not "busy".
1083 * It then checks the status for all of the "good" bits and none
1084 * of the "bad" bits, and if all is okay it returns 0. All other
1085 * cases return 1 after doing "*startstop = ide_error()", and the
1086 * caller should return the updated value of "startstop" in this case.
1087 * "startstop" is unchanged when the function returns 0;
1088 * (startstop, drive, good, bad, timeout)
1089 */
1090 extern int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
1091
1092 /*
1093 * Start a reset operation for an IDE interface.
1094 * The caller should return immediately after invoking this.
1095 */
1096 extern ide_startstop_t ide_do_reset (ide_drive_t *);
1097
1098 /*
1099 * This function is intended to be used prior to invoking ide_do_drive_cmd().
1100 */
1101 extern void ide_init_drive_cmd (struct request *rq);
1102
1103 /*
1104 * this function returns error location sector offset in case of a write error
1105 */
1106 extern u64 ide_get_error_location(ide_drive_t *, char *);
1107
1108 /*
1109 * "action" parameter type for ide_do_drive_cmd() below.
1110 */
1111 typedef enum {
1112 ide_wait, /* insert rq at end of list, and wait for it */
1113 ide_preempt, /* insert rq in front of current request */
1114 ide_head_wait, /* insert rq in front of current request and wait for it */
1115 ide_end /* insert rq at end of list, but don't wait for it */
1116 } ide_action_t;
1117
1118 extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t);
1119
1120 /*
1121 * Clean up after success/failure of an explicit drive cmd.
1122 * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_CMD).
1123 * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_TASK_MASK).
1124 *
1125 * (ide_drive_t *drive, u8 stat, u8 err)
1126 */
1127 extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
1128
1129 /*
1130 * Issue ATA command and wait for completion.
1131 * Use for implementing commands in kernel
1132 *
1133 * (ide_drive_t *drive, u8 cmd, u8 nsect, u8 feature, u8 sectors, u8 *buf)
1134 */
1135 extern int ide_wait_cmd(ide_drive_t *, u8, u8, u8, u8, u8 *);
1136
1137 typedef struct ide_task_s {
1138 /*
1139 * struct hd_drive_task_hdr tf;
1140 * task_struct_t tf;
1141 * struct hd_drive_hob_hdr hobf;
1142 * hob_struct_t hobf;
1143 */
1144 task_ioreg_t tfRegister[8];
1145 task_ioreg_t hobRegister[8];
1146 ide_reg_valid_t tf_out_flags;
1147 ide_reg_valid_t tf_in_flags;
1148 int data_phase;
1149 int command_type;
1150 ide_pre_handler_t *prehandler;
1151 ide_handler_t *handler;
1152 struct request *rq; /* copy of request */
1153 void *special; /* valid_t generally */
1154 } ide_task_t;
1155
1156 extern u32 ide_read_24(ide_drive_t *);
1157
1158 extern void SELECT_DRIVE(ide_drive_t *);
1159 extern void SELECT_INTERRUPT(ide_drive_t *);
1160 extern void SELECT_MASK(ide_drive_t *, int);
1161 extern void QUIRK_LIST(ide_drive_t *);
1162
1163 extern int drive_is_ready(ide_drive_t *);
1164 extern int wait_for_ready(ide_drive_t *, int /* timeout */);
1165
1166 /*
1167 * taskfile io for disks for now...and builds request from ide_ioctl
1168 */
1169 extern ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
1170
1171 /*
1172 * Special Flagged Register Validation Caller
1173 */
1174 extern ide_startstop_t flagged_taskfile(ide_drive_t *, ide_task_t *);
1175
1176 extern ide_startstop_t set_multmode_intr(ide_drive_t *);
1177 extern ide_startstop_t set_geometry_intr(ide_drive_t *);
1178 extern ide_startstop_t recal_intr(ide_drive_t *);
1179 extern ide_startstop_t task_no_data_intr(ide_drive_t *);
1180 extern ide_startstop_t task_in_intr(ide_drive_t *);
1181 extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *);
1182
1183 extern int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *);
1184
1185 int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
1186 int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
1187 int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
1188
1189 extern int system_bus_clock(void);
1190
1191 extern int ide_driveid_update(ide_drive_t *);
1192 extern int ide_ata66_check(ide_drive_t *, ide_task_t *);
1193 extern int ide_config_drive_speed(ide_drive_t *, u8);
1194 extern u8 eighty_ninty_three (ide_drive_t *);
1195 extern int set_transfer(ide_drive_t *, ide_task_t *);
1196 extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
1197
1198 extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
1199
1200 /*
1201 * ide_stall_queue() can be used by a drive to give excess bandwidth back
1202 * to the hwgroup by sleeping for timeout jiffies.
1203 */
1204 extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
1205
1206 extern int ide_spin_wait_hwgroup(ide_drive_t *);
1207 extern void ide_timer_expiry(unsigned long);
1208 extern irqreturn_t ide_intr(int irq, void *dev_id);
1209 extern void do_ide_request(struct request_queue *);
1210
1211 void ide_init_disk(struct gendisk *, ide_drive_t *);
1212
1213 extern int ideprobe_init(void);
1214
1215 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1216 extern void ide_scan_pcibus(int scan_direction) __init;
1217 extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
1218 #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
1219 #else
1220 #define ide_pci_register_driver(d) pci_register_driver(d)
1221 #endif
1222
1223 void ide_pci_setup_ports(struct pci_dev *, struct ide_pci_device_s *, int, ata_index_t *);
1224 extern void ide_setup_pci_noise (struct pci_dev *dev, struct ide_pci_device_s *d);
1225
1226 extern void default_hwif_iops(ide_hwif_t *);
1227 extern void default_hwif_mmiops(ide_hwif_t *);
1228 extern void default_hwif_transport(ide_hwif_t *);
1229
1230 #define ON_BOARD 1
1231 #define NEVER_BOARD 0
1232
1233 #ifdef CONFIG_BLK_DEV_OFFBOARD
1234 # define OFF_BOARD ON_BOARD
1235 #else /* CONFIG_BLK_DEV_OFFBOARD */
1236 # define OFF_BOARD NEVER_BOARD
1237 #endif /* CONFIG_BLK_DEV_OFFBOARD */
1238
1239 #define NODMA 0
1240 #define NOAUTODMA 1
1241 #define AUTODMA 2
1242
1243 typedef struct ide_pci_enablebit_s {
1244 u8 reg; /* byte pci reg holding the enable-bit */
1245 u8 mask; /* mask to isolate the enable-bit */
1246 u8 val; /* value of masked reg when "enabled" */
1247 } ide_pci_enablebit_t;
1248
1249 enum {
1250 /* Uses ISA control ports not PCI ones. */
1251 IDE_HFLAG_ISA_PORTS = (1 << 0),
1252 /* single port device */
1253 IDE_HFLAG_SINGLE = (1 << 1),
1254 /* don't use legacy PIO blacklist */
1255 IDE_HFLAG_PIO_NO_BLACKLIST = (1 << 2),
1256 /* don't use conservative PIO "downgrade" */
1257 IDE_HFLAG_PIO_NO_DOWNGRADE = (1 << 3),
1258 };
1259
1260 typedef struct ide_pci_device_s {
1261 char *name;
1262 int (*init_setup)(struct pci_dev *, struct ide_pci_device_s *);
1263 void (*init_setup_dma)(struct pci_dev *, struct ide_pci_device_s *, ide_hwif_t *);
1264 unsigned int (*init_chipset)(struct pci_dev *, const char *);
1265 void (*init_iops)(ide_hwif_t *);
1266 void (*init_hwif)(ide_hwif_t *);
1267 void (*init_dma)(ide_hwif_t *, unsigned long);
1268 void (*fixup)(ide_hwif_t *);
1269 u8 autodma;
1270 ide_pci_enablebit_t enablebits[2];
1271 u8 bootable;
1272 unsigned int extra;
1273 struct ide_pci_device_s *next;
1274 u8 host_flags;
1275 u8 pio_mask;
1276 u8 udma_mask;
1277 } ide_pci_device_t;
1278
1279 extern int ide_setup_pci_device(struct pci_dev *, ide_pci_device_t *);
1280 extern int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, ide_pci_device_t *);
1281
1282 void ide_map_sg(ide_drive_t *, struct request *);
1283 void ide_init_sg_cmd(ide_drive_t *, struct request *);
1284
1285 #define BAD_DMA_DRIVE 0
1286 #define GOOD_DMA_DRIVE 1
1287
1288 struct drive_list_entry {
1289 const char *id_model;
1290 const char *id_firmware;
1291 };
1292
1293 int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
1294
1295 #ifdef CONFIG_BLK_DEV_IDEDMA
1296 int __ide_dma_bad_drive(ide_drive_t *);
1297 int __ide_dma_good_drive(ide_drive_t *);
1298 u8 ide_max_dma_mode(ide_drive_t *);
1299 int ide_tune_dma(ide_drive_t *);
1300 void ide_dma_off(ide_drive_t *);
1301 void ide_dma_verbose(ide_drive_t *);
1302 int ide_set_dma(ide_drive_t *);
1303 ide_startstop_t ide_dma_intr(ide_drive_t *);
1304
1305 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1306 extern int ide_build_sglist(ide_drive_t *, struct request *);
1307 extern int ide_build_dmatable(ide_drive_t *, struct request *);
1308 extern void ide_destroy_dmatable(ide_drive_t *);
1309 extern int ide_release_dma(ide_hwif_t *);
1310 extern void ide_setup_dma(ide_hwif_t *, unsigned long, unsigned int);
1311
1312 void ide_dma_host_off(ide_drive_t *);
1313 void ide_dma_off_quietly(ide_drive_t *);
1314 void ide_dma_host_on(ide_drive_t *);
1315 extern int __ide_dma_on(ide_drive_t *);
1316 extern int ide_dma_setup(ide_drive_t *);
1317 extern void ide_dma_start(ide_drive_t *);
1318 extern int __ide_dma_end(ide_drive_t *);
1319 extern void ide_dma_lost_irq(ide_drive_t *);
1320 extern void ide_dma_timeout(ide_drive_t *);
1321 #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
1322
1323 #else
1324 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
1325 static inline int ide_tune_dma(ide_drive_t *drive) { return 0; }
1326 static inline void ide_dma_off(ide_drive_t *drive) { ; }
1327 static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
1328 static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
1329 #endif /* CONFIG_BLK_DEV_IDEDMA */
1330
1331 #ifndef CONFIG_BLK_DEV_IDEDMA_PCI
1332 static inline void ide_release_dma(ide_hwif_t *drive) {;}
1333 #endif
1334
1335 #ifdef CONFIG_BLK_DEV_IDEACPI
1336 extern int ide_acpi_exec_tfs(ide_drive_t *drive);
1337 extern void ide_acpi_get_timing(ide_hwif_t *hwif);
1338 extern void ide_acpi_push_timing(ide_hwif_t *hwif);
1339 extern void ide_acpi_init(ide_hwif_t *hwif);
1340 #else
1341 static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
1342 static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
1343 static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
1344 static inline void ide_acpi_init(ide_hwif_t *hwif) { ; }
1345 #endif
1346
1347 extern int ide_hwif_request_regions(ide_hwif_t *hwif);
1348 extern void ide_hwif_release_regions(ide_hwif_t* hwif);
1349 extern void ide_unregister (unsigned int index);
1350
1351 void ide_register_region(struct gendisk *);
1352 void ide_unregister_region(struct gendisk *);
1353
1354 void ide_undecoded_slave(ide_hwif_t *);
1355
1356 int probe_hwif_init_with_fixup(ide_hwif_t *, void (*)(ide_hwif_t *));
1357 extern int probe_hwif_init(ide_hwif_t *);
1358
1359 static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
1360 {
1361 return hwif->hwif_data;
1362 }
1363
1364 static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
1365 {
1366 hwif->hwif_data = data;
1367 }
1368
1369 /* ide-lib.c */
1370 u8 ide_rate_filter(ide_drive_t *, u8);
1371 extern char *ide_xfer_verbose(u8 xfer_rate);
1372 extern void ide_toggle_bounce(ide_drive_t *drive, int on);
1373 extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
1374 int ide_use_fast_pio(ide_drive_t *);
1375
1376 static inline int ide_dev_has_iordy(struct hd_driveid *id)
1377 {
1378 return ((id->field_valid & 2) && (id->capability & 8)) ? 1 : 0;
1379 }
1380
1381 u8 ide_dump_status(ide_drive_t *, const char *, u8);
1382
1383 typedef struct ide_pio_timings_s {
1384 int setup_time; /* Address setup (ns) minimum */
1385 int active_time; /* Active pulse (ns) minimum */
1386 int cycle_time; /* Cycle time (ns) minimum = */
1387 /* active + recovery (+ setup for some chips) */
1388 } ide_pio_timings_t;
1389
1390 unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
1391 u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
1392 extern const ide_pio_timings_t ide_pio_timings[6];
1393
1394
1395 extern spinlock_t ide_lock;
1396 extern struct mutex ide_cfg_mtx;
1397 /*
1398 * Structure locking:
1399 *
1400 * ide_cfg_mtx and ide_lock together protect changes to
1401 * ide_hwif_t->{next,hwgroup}
1402 * ide_drive_t->next
1403 *
1404 * ide_hwgroup_t->busy: ide_lock
1405 * ide_hwgroup_t->hwif: ide_lock
1406 * ide_hwif_t->mate: constant, no locking
1407 * ide_drive_t->hwif: constant, no locking
1408 */
1409
1410 #define local_irq_set(flags) do { local_save_flags((flags)); local_irq_enable_in_hardirq(); } while (0)
1411
1412 extern struct bus_type ide_bus_type;
1413
1414 /* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */
1415 #define ide_id_has_flush_cache(id) ((id)->cfs_enable_2 & 0x3000)
1416
1417 /* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */
1418 #define ide_id_has_flush_cache_ext(id) \
1419 (((id)->cfs_enable_2 & 0x2400) == 0x2400)
1420
1421 static inline int hwif_to_node(ide_hwif_t *hwif)
1422 {
1423 struct pci_dev *dev = hwif->pci_dev;
1424 return dev ? pcibus_to_node(dev->bus) : -1;
1425 }
1426
1427 #endif /* _IDE_H */
Trivial mods to LK