drivers/usb/host/xhci-pci.c

   1 /*
   2  * xHCI host controller driver PCI Bus Glue.
   3  *
   4  * Copyright (C) 2008 Intel Corp.
   5  *
   6  * Author: Sarah Sharp
   7  * Some code borrowed from the Linux EHCI driver.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  15  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  16  * for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software Foundation,
  20  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #include <linux/pci.h>
  24 #include <linux/slab.h>
  25 #include <linux/module.h>
  26
  27 #include "xhci.h"
  28
  29 /* Device for a quirk */
  30 #define PCI_VENDOR_ID_FRESCO_LOGIC      0x1b73
  31 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK  0x1000
  32 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400       0x1400
  33
  34 #define PCI_VENDOR_ID_ETRON             0x1b6f
  35 #define PCI_DEVICE_ID_ASROCK_P67        0x7023
  36
  37 static const char hcd_name[] = "xhci_hcd";
  38
  39 /* called after powerup, by probe or system-pm "wakeup" */
  40 static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
  41 {
  42         /*
  43          * TODO: Implement finding debug ports later.
  44          * TODO: see if there are any quirks that need to be added to handle
  45          * new extended capabilities.
  46          */
  47
  48         /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
  49         if (!pci_set_mwi(pdev))
  50                 xhci_dbg(xhci, "MWI active\n");
  51
  52         xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
  53         return 0;
  54 }
  55
  56 static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
  57 {
  58         struct pci_dev          *pdev = to_pci_dev(dev);
  59
  60         /* Look for vendor-specific quirks */
  61         if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
  62                         (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
  63                          pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
  64                 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
  65                                 pdev->revision == 0x0) {
  66                         xhci->quirks |= XHCI_RESET_EP_QUIRK;
  67                         xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
  68                                         " endpoint cmd after reset endpoint\n");
  69                 }
  70                 /* Fresco Logic confirms: all revisions of this chip do not
  71                  * support MSI, even though some of them claim to in their PCI
  72                  * capabilities.
  73                  */
  74                 xhci->quirks |= XHCI_BROKEN_MSI;
  75                 xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
  76                                 "has broken MSI implementation\n",
  77                                 pdev->revision);
  78                 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
  79         }
  80
  81         if (pdev->vendor == PCI_VENDOR_ID_NEC)
  82                 xhci->quirks |= XHCI_NEC_HOST;
  83
  84         if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
  85                 xhci->quirks |= XHCI_AMD_0x96_HOST;
  86
  87         /* AMD PLL quirk */
  88         if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
  89                 xhci->quirks |= XHCI_AMD_PLL_FIX;
  90         if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
  91                 xhci->quirks |= XHCI_LPM_SUPPORT;
  92                 xhci->quirks |= XHCI_INTEL_HOST;
  93         }
  94         if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
  95                         pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
  96                 xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
  97                 xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
  98                 xhci->limit_active_eps = 64;
  99                 xhci->quirks |= XHCI_SW_BW_CHECKING;
 100                 /*
 101                  * PPT desktop boards DH77EB and DH77DF will power back on after
 102                  * a few seconds of being shutdown.  The fix for this is to
 103                  * switch the ports from xHCI to EHCI on shutdown.  We can't use
 104                  * DMI information to find those particular boards (since each
 105                  * vendor will change the board name), so we have to key off all
 106                  * PPT chipsets.
 107                  */
 108                 xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 109                 xhci->quirks |= XHCI_AVOID_BEI;
 110         }
 111         if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 112                         pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
 113                 xhci->quirks |= XHCI_RESET_ON_RESUME;
 114                 xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
 115                 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 116         }
 117         if (pdev->vendor == PCI_VENDOR_ID_VIA)
 118                 xhci->quirks |= XHCI_RESET_ON_RESUME;
 119 }
 120
 121 /* called during probe() after chip reset completes */
 122 static int xhci_pci_setup(struct usb_hcd *hcd)
 123 {
 124         struct xhci_hcd         *xhci;
 125         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
 126         int                     retval;
 127
 128         retval = xhci_gen_setup(hcd, xhci_pci_quirks);
 129         if (retval)
 130                 return retval;
 131
 132         xhci = hcd_to_xhci(hcd);
 133         if (!usb_hcd_is_primary_hcd(hcd))
 134                 return 0;
 135
 136         pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
 137         xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
 138
 139         /* Find any debug ports */
 140         retval = xhci_pci_reinit(xhci, pdev);
 141         if (!retval)
 142                 return retval;
 143
 144         kfree(xhci);
 145         return retval;
 146 }
 147
 148 /*
 149  * We need to register our own PCI probe function (instead of the USB core's
 150  * function) in order to create a second roothub under xHCI.
 151  */
 152 static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 153 {
 154         int retval;
 155         struct xhci_hcd *xhci;
 156         struct hc_driver *driver;
 157         struct usb_hcd *hcd;
 158
 159         driver = (struct hc_driver *)id->driver_data;
 160         /* Register the USB 2.0 roothub.
 161          * FIXME: USB core must know to register the USB 2.0 roothub first.
 162          * This is sort of silly, because we could just set the HCD driver flags
 163          * to say USB 2.0, but I'm not sure what the implications would be in
 164          * the other parts of the HCD code.
 165          */
 166         retval = usb_hcd_pci_probe(dev, id);
 167
 168         if (retval)
 169                 return retval;
 170
 171         /* USB 2.0 roothub is stored in the PCI device now. */
 172         hcd = dev_get_drvdata(&dev->dev);
 173         xhci = hcd_to_xhci(hcd);
 174         xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
 175                                 pci_name(dev), hcd);
 176         if (!xhci->shared_hcd) {
 177                 retval = -ENOMEM;
 178                 goto dealloc_usb2_hcd;
 179         }
 180
 181         /* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset)
 182          * is called by usb_add_hcd().
 183          */
 184         *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;
 185
 186         retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
 187                         IRQF_SHARED);
 188         if (retval)
 189                 goto put_usb3_hcd;
 190         /* Roothub already marked as USB 3.0 speed */
 191
 192         /* We know the LPM timeout algorithms for this host, let the USB core
 193          * enable and disable LPM for devices under the USB 3.0 roothub.
 194          */
 195         if (xhci->quirks & XHCI_LPM_SUPPORT)
 196                 hcd_to_bus(xhci->shared_hcd)->root_hub->lpm_capable = 1;
 197
 198         return 0;
 199
 200 put_usb3_hcd:
 201         usb_put_hcd(xhci->shared_hcd);
 202 dealloc_usb2_hcd:
 203         usb_hcd_pci_remove(dev);
 204         return retval;
 205 }
 206
 207 static void xhci_pci_remove(struct pci_dev *dev)
 208 {
 209         struct xhci_hcd *xhci;
 210
 211         xhci = hcd_to_xhci(pci_get_drvdata(dev));
 212         if (xhci->shared_hcd) {
 213                 usb_remove_hcd(xhci->shared_hcd);
 214                 usb_put_hcd(xhci->shared_hcd);
 215         }
 216         usb_hcd_pci_remove(dev);
 217         kfree(xhci);
 218 }
 219
 220 #ifdef CONFIG_PM
 221 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 222 {
 223         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 224         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
 225
 226         /*
 227          * Systems with the TI redriver that loses port status change events
 228          * need to have the registers polled during D3, so avoid D3cold.
 229          */
 230         if (xhci_compliance_mode_recovery_timer_quirk_check())
 231                 pdev->no_d3cold = true;
 232
 233         return xhci_suspend(xhci);
 234 }
 235
 236 static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 237 {
 238         struct xhci_hcd         *xhci = hcd_to_xhci(hcd);
 239         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
 240         int                     retval = 0;
 241
 242         /* The BIOS on systems with the Intel Panther Point chipset may or may
 243          * not support xHCI natively.  That means that during system resume, it
 244          * may switch the ports back to EHCI so that users can use their
 245          * keyboard to select a kernel from GRUB after resume from hibernate.
 246          *
 247          * The BIOS is supposed to remember whether the OS had xHCI ports
 248          * enabled before resume, and switch the ports back to xHCI when the
 249          * BIOS/OS semaphore is written, but we all know we can't trust BIOS
 250          * writers.
 251          *
 252          * Unconditionally switch the ports back to xHCI after a system resume.
 253          * We can't tell whether the EHCI or xHCI controller will be resumed
 254          * first, so we have to do the port switchover in both drivers.  Writing
 255          * a '1' to the port switchover registers should have no effect if the
 256          * port was already switched over.
 257          */
 258         if (usb_is_intel_switchable_xhci(pdev))
 259                 usb_enable_xhci_ports(pdev);
 260
 261         retval = xhci_resume(xhci, hibernated);
 262         return retval;
 263 }
 264 #endif /* CONFIG_PM */
 265
 266 static const struct hc_driver xhci_pci_hc_driver = {
 267         .description =          hcd_name,
 268         .product_desc =         "xHCI Host Controller",
 269         .hcd_priv_size =        sizeof(struct xhci_hcd *),
 270
 271         /*
 272          * generic hardware linkage
 273          */
 274         .irq =                  xhci_irq,
 275         .flags =                HCD_MEMORY | HCD_USB3 | HCD_SHARED,
 276
 277         /*
 278          * basic lifecycle operations
 279          */
 280         .reset =                xhci_pci_setup,
 281         .start =                xhci_run,
 282 #ifdef CONFIG_PM
 283         .pci_suspend =          xhci_pci_suspend,
 284         .pci_resume =           xhci_pci_resume,
 285 #endif
 286         .stop =                 xhci_stop,
 287         .shutdown =             xhci_shutdown,
 288
 289         /*
 290          * managing i/o requests and associated device resources
 291          */
 292         .urb_enqueue =          xhci_urb_enqueue,
 293         .urb_dequeue =          xhci_urb_dequeue,
 294         .alloc_dev =            xhci_alloc_dev,
 295         .free_dev =             xhci_free_dev,
 296         .alloc_streams =        xhci_alloc_streams,
 297         .free_streams =         xhci_free_streams,
 298         .add_endpoint =         xhci_add_endpoint,
 299         .drop_endpoint =        xhci_drop_endpoint,
 300         .endpoint_reset =       xhci_endpoint_reset,
 301         .check_bandwidth =      xhci_check_bandwidth,
 302         .reset_bandwidth =      xhci_reset_bandwidth,
 303         .address_device =       xhci_address_device,
 304         .update_hub_device =    xhci_update_hub_device,
 305         .reset_device =         xhci_discover_or_reset_device,
 306
 307         /*
 308          * scheduling support
 309          */
 310         .get_frame_number =     xhci_get_frame,
 311
 312         /* Root hub support */
 313         .hub_control =          xhci_hub_control,
 314         .hub_status_data =      xhci_hub_status_data,
 315         .bus_suspend =          xhci_bus_suspend,
 316         .bus_resume =           xhci_bus_resume,
 317         /*
 318          * call back when device connected and addressed
 319          */
 320         .update_device =        xhci_update_device,
 321         .set_usb2_hw_lpm =      xhci_set_usb2_hardware_lpm,
 322         .enable_usb3_lpm_timeout =      xhci_enable_usb3_lpm_timeout,
 323         .disable_usb3_lpm_timeout =     xhci_disable_usb3_lpm_timeout,
 324         .find_raw_port_number = xhci_find_raw_port_number,
 325 };
 326
 327 /*-------------------------------------------------------------------------*/
 328
 329 /* PCI driver selection metadata; PCI hotplugging uses this */
 330 static const struct pci_device_id pci_ids[] = { {
 331         /* handle any USB 3.0 xHCI controller */
 332         PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
 333         .driver_data =  (unsigned long) &xhci_pci_hc_driver,
 334         },
 335         { /* end: all zeroes */ }
 336 };
 337 MODULE_DEVICE_TABLE(pci, pci_ids);
 338
 339 /* pci driver glue; this is a "new style" PCI driver module */
 340 static struct pci_driver xhci_pci_driver = {
 341         .name =         (char *) hcd_name,
 342         .id_table =     pci_ids,
 343
 344         .probe =        xhci_pci_probe,
 345         .remove =       xhci_pci_remove,
 346         /* suspend and resume implemented later */
 347
 348         .shutdown =     usb_hcd_pci_shutdown,
 349 #ifdef CONFIG_PM_SLEEP
 350         .driver = {
 351                 .pm = &usb_hcd_pci_pm_ops
 352         },
 353 #endif
 354 };
 355
 356 int __init xhci_register_pci(void)
 357 {
 358         return pci_register_driver(&xhci_pci_driver);
 359 }
 360
 361 void xhci_unregister_pci(void)
 362 {
 363         pci_unregister_driver(&xhci_pci_driver);
 364 }