[PATCH] w1: Userspace communication protocol over connector.
[linux-2.6/verdex.git] / include / asm-mips / interrupt.h
bloba99d6867510fde017b85e00ddee65d79ae5762e5
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
6 * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
7 * Copyright (C) 1996 by Paul M. Antoine
8 * Copyright (C) 1999 Silicon Graphics
9 * Copyright (C) 2000 MIPS Technologies, Inc.
11 #ifndef _ASM_INTERRUPT_H
12 #define _ASM_INTERRUPT_H
14 #include <asm/hazards.h>
16 __asm__ (
17 " .macro local_irq_enable \n"
18 " .set push \n"
19 " .set reorder \n"
20 " .set noat \n"
21 #ifdef CONFIG_MIPS_MT_SMTC
22 " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n"
23 " ori $1, 0x400 \n"
24 " xori $1, 0x400 \n"
25 " mtc0 $1, $2, 1 \n"
26 #elif defined(CONFIG_CPU_MIPSR2)
27 " ei \n"
28 #else
29 " mfc0 $1,$12 \n"
30 " ori $1,0x1f \n"
31 " xori $1,0x1e \n"
32 " mtc0 $1,$12 \n"
33 #endif
34 " irq_enable_hazard \n"
35 " .set pop \n"
36 " .endm");
38 static inline void local_irq_enable(void)
40 __asm__ __volatile__(
41 "local_irq_enable"
42 : /* no outputs */
43 : /* no inputs */
44 : "memory");
48 * For cli() we have to insert nops to make sure that the new value
49 * has actually arrived in the status register before the end of this
50 * macro.
51 * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
52 * no nops at all.
55 * For TX49, operating only IE bit is not enough.
57 * If mfc0 $12 follows store and the mfc0 is last instruction of a
58 * page and fetching the next instruction causes TLB miss, the result
59 * of the mfc0 might wrongly contain EXL bit.
61 * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
63 * Workaround: mask EXL bit of the result or place a nop before mfc0.
65 __asm__ (
66 " .macro local_irq_disable\n"
67 " .set push \n"
68 " .set noat \n"
69 #ifdef CONFIG_MIPS_MT_SMTC
70 " mfc0 $1, $2, 1 \n"
71 " ori $1, 0x400 \n"
72 " .set noreorder \n"
73 " mtc0 $1, $2, 1 \n"
74 #elif defined(CONFIG_CPU_MIPSR2)
75 " di \n"
76 #else
77 " mfc0 $1,$12 \n"
78 " ori $1,0x1f \n"
79 " xori $1,0x1f \n"
80 " .set noreorder \n"
81 " mtc0 $1,$12 \n"
82 #endif
83 " irq_disable_hazard \n"
84 " .set pop \n"
85 " .endm \n");
87 static inline void local_irq_disable(void)
89 __asm__ __volatile__(
90 "local_irq_disable"
91 : /* no outputs */
92 : /* no inputs */
93 : "memory");
96 __asm__ (
97 " .macro local_save_flags flags \n"
98 " .set push \n"
99 " .set reorder \n"
100 #ifdef CONFIG_MIPS_MT_SMTC
101 " mfc0 \\flags, $2, 1 \n"
102 #else
103 " mfc0 \\flags, $12 \n"
104 #endif
105 " .set pop \n"
106 " .endm \n");
108 #define local_save_flags(x) \
109 __asm__ __volatile__( \
110 "local_save_flags %0" \
111 : "=r" (x))
113 __asm__ (
114 " .macro local_irq_save result \n"
115 " .set push \n"
116 " .set reorder \n"
117 " .set noat \n"
118 #ifdef CONFIG_MIPS_MT_SMTC
119 " mfc0 \\result, $2, 1 \n"
120 " ori $1, \\result, 0x400 \n"
121 " .set noreorder \n"
122 " mtc0 $1, $2, 1 \n"
123 " andi \\result, \\result, 0x400 \n"
124 #elif defined(CONFIG_CPU_MIPSR2)
125 " di \\result \n"
126 " andi \\result, 1 \n"
127 #else
128 " mfc0 \\result, $12 \n"
129 " ori $1, \\result, 0x1f \n"
130 " xori $1, 0x1f \n"
131 " .set noreorder \n"
132 " mtc0 $1, $12 \n"
133 #endif
134 " irq_disable_hazard \n"
135 " .set pop \n"
136 " .endm \n");
138 #define local_irq_save(x) \
139 __asm__ __volatile__( \
140 "local_irq_save\t%0" \
141 : "=r" (x) \
142 : /* no inputs */ \
143 : "memory")
145 __asm__ (
146 " .macro local_irq_restore flags \n"
147 " .set push \n"
148 " .set noreorder \n"
149 " .set noat \n"
150 #ifdef CONFIG_MIPS_MT_SMTC
151 "mfc0 $1, $2, 1 \n"
152 "andi \\flags, 0x400 \n"
153 "ori $1, 0x400 \n"
154 "xori $1, 0x400 \n"
155 "or \\flags, $1 \n"
156 "mtc0 \\flags, $2, 1 \n"
157 #elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
159 * Slow, but doesn't suffer from a relativly unlikely race
160 * condition we're having since days 1.
162 " beqz \\flags, 1f \n"
163 " di \n"
164 " ei \n"
165 "1: \n"
166 #elif defined(CONFIG_CPU_MIPSR2)
168 * Fast, dangerous. Life is fun, life is good.
170 " mfc0 $1, $12 \n"
171 " ins $1, \\flags, 0, 1 \n"
172 " mtc0 $1, $12 \n"
173 #else
174 " mfc0 $1, $12 \n"
175 " andi \\flags, 1 \n"
176 " ori $1, 0x1f \n"
177 " xori $1, 0x1f \n"
178 " or \\flags, $1 \n"
179 " mtc0 \\flags, $12 \n"
180 #endif
181 " irq_disable_hazard \n"
182 " .set pop \n"
183 " .endm \n");
185 #define local_irq_restore(flags) \
186 do { \
187 unsigned long __tmp1; \
189 __asm__ __volatile__( \
190 "local_irq_restore\t%0" \
191 : "=r" (__tmp1) \
192 : "0" (flags) \
193 : "memory"); \
194 } while(0)
196 static inline int irqs_disabled(void)
198 #ifdef CONFIG_MIPS_MT_SMTC
200 * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
202 unsigned long __result;
204 __asm__ __volatile__(
205 " .set noreorder \n"
206 " mfc0 %0, $2, 1 \n"
207 " andi %0, 0x400 \n"
208 " slt %0, $0, %0 \n"
209 " .set reorder \n"
210 : "=r" (__result));
212 return __result;
213 #else
214 unsigned long flags;
215 local_save_flags(flags);
217 return !(flags & 1);
218 #endif
221 #endif /* _ASM_INTERRUPT_H */