2 * Host AP (software wireless LAN access point) driver for
3 * Intersil Prism2/2.5/3.
5 * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
7 * Copyright (c) 2002-2005, Jouni Malinen <jkmaline@cc.hut.fi>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation. See README and COPYING for
15 * - there is currently no way of associating TX packets to correct wds device
16 * when TX Exc/OK event occurs, so all tx_packets and some
17 * tx_errors/tx_dropped are added to the main netdevice; using sw_support
18 * field in txdesc might be used to fix this (using Alloc event to increment
19 * tx_packets would need some further info in txfid table)
21 * Buffer Access Path (BAP) usage:
22 * Prism2 cards have two separate BAPs for accessing the card memory. These
23 * should allow concurrent access to two different frames and the driver
24 * previously used BAP0 for sending data and BAP1 for receiving data.
25 * However, there seems to be number of issues with concurrent access and at
26 * least one know hardware bug in using BAP0 and BAP1 concurrently with PCI
27 * Prism2.5. Therefore, the driver now only uses BAP0 for moving data between
28 * host and card memories. BAP0 accesses are protected with local->baplock
29 * (spin_lock_bh) to prevent concurrent use.
33 #include <linux/config.h>
35 #include <asm/delay.h>
36 #include <asm/uaccess.h>
38 #include <linux/slab.h>
39 #include <linux/netdevice.h>
40 #include <linux/etherdevice.h>
41 #include <linux/proc_fs.h>
42 #include <linux/if_arp.h>
43 #include <linux/delay.h>
44 #include <linux/random.h>
45 #include <linux/wait.h>
46 #include <linux/sched.h>
47 #include <linux/rtnetlink.h>
48 #include <linux/wireless.h>
49 #include <net/iw_handler.h>
50 #include <net/ieee80211.h>
51 #include <net/ieee80211_crypt.h>
54 #include "hostap_80211.h"
56 #include "hostap_ap.h"
59 /* #define final_version */
61 static int mtu
= 1500;
62 module_param(mtu
, int, 0444);
63 MODULE_PARM_DESC(mtu
, "Maximum transfer unit");
65 static int channel
[MAX_PARM_DEVICES
] = { 3, DEF_INTS
};
66 module_param_array(channel
, int, NULL
, 0444);
67 MODULE_PARM_DESC(channel
, "Initial channel");
69 static char essid
[33] = "test";
70 module_param_string(essid
, essid
, sizeof(essid
), 0444);
71 MODULE_PARM_DESC(essid
, "Host AP's ESSID");
73 static int iw_mode
[MAX_PARM_DEVICES
] = { IW_MODE_MASTER
, DEF_INTS
};
74 module_param_array(iw_mode
, int, NULL
, 0444);
75 MODULE_PARM_DESC(iw_mode
, "Initial operation mode");
77 static int beacon_int
[MAX_PARM_DEVICES
] = { 100, DEF_INTS
};
78 module_param_array(beacon_int
, int, NULL
, 0444);
79 MODULE_PARM_DESC(beacon_int
, "Beacon interval (1 = 1024 usec)");
81 static int dtim_period
[MAX_PARM_DEVICES
] = { 1, DEF_INTS
};
82 module_param_array(dtim_period
, int, NULL
, 0444);
83 MODULE_PARM_DESC(dtim_period
, "DTIM period");
85 static char dev_template
[16] = "wlan%d";
86 module_param_string(dev_template
, dev_template
, sizeof(dev_template
), 0444);
87 MODULE_PARM_DESC(dev_template
, "Prefix for network device name (default: "
91 #define EXTRA_EVENTS_WTERR 0
93 /* check WTERR events (Wait Time-out) in development versions */
94 #define EXTRA_EVENTS_WTERR HFA384X_EV_WTERR
97 /* Events that will be using BAP0 */
98 #define HFA384X_BAP0_EVENTS \
99 (HFA384X_EV_TXEXC | HFA384X_EV_RX | HFA384X_EV_INFO | HFA384X_EV_TX)
101 /* event mask, i.e., events that will result in an interrupt */
102 #define HFA384X_EVENT_MASK \
103 (HFA384X_BAP0_EVENTS | HFA384X_EV_ALLOC | HFA384X_EV_INFDROP | \
104 HFA384X_EV_CMD | HFA384X_EV_TICK | \
107 /* Default TX control flags: use 802.11 headers and request interrupt for
108 * failed transmits. Frames that request ACK callback, will add
109 * _TX_OK flag and _ALT_RTRY flag may be used to select different retry policy.
111 #define HFA384X_TX_CTRL_FLAGS \
112 (HFA384X_TX_CTRL_802_11 | HFA384X_TX_CTRL_TX_EX)
116 #define HFA384X_CMD_BUSY_TIMEOUT 5000
117 #define HFA384X_BAP_BUSY_TIMEOUT 50000
120 #define HFA384X_CMD_COMPL_TIMEOUT 20000
121 #define HFA384X_DL_COMPL_TIMEOUT 1000000
123 /* Wait times for initialization; yield to other processes to avoid busy
124 * waiting for long time. */
125 #define HFA384X_INIT_TIMEOUT (HZ / 2) /* 500 ms */
126 #define HFA384X_ALLOC_COMPL_TIMEOUT (HZ / 20) /* 50 ms */
129 static void prism2_hw_reset(struct net_device
*dev
);
130 static void prism2_check_sta_fw_version(local_info_t
*local
);
132 #ifdef PRISM2_DOWNLOAD_SUPPORT
133 /* hostap_download.c */
134 static int prism2_download_aux_dump(struct net_device
*dev
,
135 unsigned int addr
, int len
, u8
*buf
);
136 static u8
* prism2_read_pda(struct net_device
*dev
);
137 static int prism2_download(local_info_t
*local
,
138 struct prism2_download_param
*param
);
139 static void prism2_download_free_data(struct prism2_download_data
*dl
);
140 static int prism2_download_volatile(local_info_t
*local
,
141 struct prism2_download_data
*param
);
142 static int prism2_download_genesis(local_info_t
*local
,
143 struct prism2_download_data
*param
);
144 static int prism2_get_ram_size(local_info_t
*local
);
145 #endif /* PRISM2_DOWNLOAD_SUPPORT */
150 #ifndef final_version
151 /* magic value written to SWSUPPORT0 reg. for detecting whether card is still
153 #define HFA384X_MAGIC 0x8A32
157 static u16
hfa384x_read_reg(struct net_device
*dev
, u16 reg
)
159 return HFA384X_INW(reg
);
163 static void hfa384x_read_regs(struct net_device
*dev
,
164 struct hfa384x_regs
*regs
)
166 regs
->cmd
= HFA384X_INW(HFA384X_CMD_OFF
);
167 regs
->evstat
= HFA384X_INW(HFA384X_EVSTAT_OFF
);
168 regs
->offset0
= HFA384X_INW(HFA384X_OFFSET0_OFF
);
169 regs
->offset1
= HFA384X_INW(HFA384X_OFFSET1_OFF
);
170 regs
->swsupport0
= HFA384X_INW(HFA384X_SWSUPPORT0_OFF
);
175 * __hostap_cmd_queue_free - Free Prism2 command queue entry (private)
176 * @local: pointer to private Host AP driver data
177 * @entry: Prism2 command queue entry to be freed
178 * @del_req: request the entry to be removed
180 * Internal helper function for freeing Prism2 command queue entries.
181 * Caller must have acquired local->cmdlock before calling this function.
183 static inline void __hostap_cmd_queue_free(local_info_t
*local
,
184 struct hostap_cmd_queue
*entry
,
189 if (!list_empty(&entry
->list
)) {
190 list_del_init(&entry
->list
);
191 local
->cmd_queue_len
--;
195 if (atomic_dec_and_test(&entry
->usecnt
) && entry
->del_req
)
201 * hostap_cmd_queue_free - Free Prism2 command queue entry
202 * @local: pointer to private Host AP driver data
203 * @entry: Prism2 command queue entry to be freed
204 * @del_req: request the entry to be removed
206 * Free a Prism2 command queue entry.
208 static inline void hostap_cmd_queue_free(local_info_t
*local
,
209 struct hostap_cmd_queue
*entry
,
214 spin_lock_irqsave(&local
->cmdlock
, flags
);
215 __hostap_cmd_queue_free(local
, entry
, del_req
);
216 spin_unlock_irqrestore(&local
->cmdlock
, flags
);
221 * prism2_clear_cmd_queue - Free all pending Prism2 command queue entries
222 * @local: pointer to private Host AP driver data
224 static void prism2_clear_cmd_queue(local_info_t
*local
)
226 struct list_head
*ptr
, *n
;
228 struct hostap_cmd_queue
*entry
;
230 spin_lock_irqsave(&local
->cmdlock
, flags
);
231 list_for_each_safe(ptr
, n
, &local
->cmd_queue
) {
232 entry
= list_entry(ptr
, struct hostap_cmd_queue
, list
);
233 atomic_inc(&entry
->usecnt
);
234 printk(KERN_DEBUG
"%s: removed pending cmd_queue entry "
235 "(type=%d, cmd=0x%04x, param0=0x%04x)\n",
236 local
->dev
->name
, entry
->type
, entry
->cmd
,
238 __hostap_cmd_queue_free(local
, entry
, 1);
240 if (local
->cmd_queue_len
) {
241 /* This should not happen; print debug message and clear
243 printk(KERN_DEBUG
"%s: cmd_queue_len (%d) not zero after "
244 "flush\n", local
->dev
->name
, local
->cmd_queue_len
);
245 local
->cmd_queue_len
= 0;
247 spin_unlock_irqrestore(&local
->cmdlock
, flags
);
252 * hfa384x_cmd_issue - Issue a Prism2 command to the hardware
253 * @dev: pointer to net_device
254 * @entry: Prism2 command queue entry to be issued
256 static inline int hfa384x_cmd_issue(struct net_device
*dev
,
257 struct hostap_cmd_queue
*entry
)
259 struct hostap_interface
*iface
;
265 iface
= netdev_priv(dev
);
266 local
= iface
->local
;
268 if (local
->func
->card_present
&& !local
->func
->card_present(local
))
272 printk(KERN_DEBUG
"%s: driver bug - re-issuing command @%p\n",
276 /* wait until busy bit is clear; this should always be clear since the
277 * commands are serialized */
278 tries
= HFA384X_CMD_BUSY_TIMEOUT
;
279 while (HFA384X_INW(HFA384X_CMD_OFF
) & HFA384X_CMD_BUSY
&& tries
> 0) {
283 #ifndef final_version
284 if (tries
!= HFA384X_CMD_BUSY_TIMEOUT
) {
285 prism2_io_debug_error(dev
, 1);
286 printk(KERN_DEBUG
"%s: hfa384x_cmd_issue: cmd reg was busy "
287 "for %d usec\n", dev
->name
,
288 HFA384X_CMD_BUSY_TIMEOUT
- tries
);
292 reg
= HFA384X_INW(HFA384X_CMD_OFF
);
293 prism2_io_debug_error(dev
, 2);
294 printk(KERN_DEBUG
"%s: hfa384x_cmd_issue - timeout - "
295 "reg=0x%04x\n", dev
->name
, reg
);
300 spin_lock_irqsave(&local
->cmdlock
, flags
);
301 HFA384X_OUTW(entry
->param0
, HFA384X_PARAM0_OFF
);
302 HFA384X_OUTW(entry
->param1
, HFA384X_PARAM1_OFF
);
303 HFA384X_OUTW(entry
->cmd
, HFA384X_CMD_OFF
);
305 spin_unlock_irqrestore(&local
->cmdlock
, flags
);
312 * hfa384x_cmd - Issue a Prism2 command and wait (sleep) for completion
313 * @dev: pointer to net_device
314 * @cmd: Prism2 command code (HFA384X_CMD_CODE_*)
315 * @param0: value for Param0 register
316 * @param1: value for Param1 register (pointer; %NULL if not used)
317 * @resp0: pointer for Resp0 data or %NULL if Resp0 is not needed
319 * Issue given command (possibly after waiting in command queue) and sleep
320 * until the command is completed (or timed out or interrupted). This can be
321 * called only from user process context.
323 static int hfa384x_cmd(struct net_device
*dev
, u16 cmd
, u16 param0
,
324 u16
*param1
, u16
*resp0
)
326 struct hostap_interface
*iface
;
328 int err
, res
, issue
, issued
= 0;
330 struct hostap_cmd_queue
*entry
;
331 DECLARE_WAITQUEUE(wait
, current
);
333 iface
= netdev_priv(dev
);
334 local
= iface
->local
;
336 if (in_interrupt()) {
337 printk(KERN_DEBUG
"%s: hfa384x_cmd called from interrupt "
338 "context\n", dev
->name
);
342 if (local
->cmd_queue_len
>= HOSTAP_CMD_QUEUE_MAX_LEN
) {
343 printk(KERN_DEBUG
"%s: hfa384x_cmd: cmd_queue full\n",
348 if (signal_pending(current
))
351 entry
= (struct hostap_cmd_queue
*)
352 kmalloc(sizeof(*entry
), GFP_ATOMIC
);
354 printk(KERN_DEBUG
"%s: hfa384x_cmd - kmalloc failed\n",
358 memset(entry
, 0, sizeof(*entry
));
359 atomic_set(&entry
->usecnt
, 1);
360 entry
->type
= CMD_SLEEP
;
362 entry
->param0
= param0
;
364 entry
->param1
= *param1
;
365 init_waitqueue_head(&entry
->compl);
367 /* prepare to wait for command completion event, but do not sleep yet
369 add_wait_queue(&entry
->compl, &wait
);
370 set_current_state(TASK_INTERRUPTIBLE
);
372 spin_lock_irqsave(&local
->cmdlock
, flags
);
373 issue
= list_empty(&local
->cmd_queue
);
376 list_add_tail(&entry
->list
, &local
->cmd_queue
);
377 local
->cmd_queue_len
++;
378 spin_unlock_irqrestore(&local
->cmdlock
, flags
);
382 goto wait_completion
;
384 if (signal_pending(current
))
388 if (hfa384x_cmd_issue(dev
, entry
))
395 if (!err
&& entry
->type
!= CMD_COMPLETED
) {
396 /* sleep until command is completed or timed out */
397 res
= schedule_timeout(2 * HZ
);
401 if (!err
&& signal_pending(current
))
405 /* the command was issued, so a CmdCompl event should occur
406 * soon; however, there's a pending signal and
407 * schedule_timeout() would be interrupted; wait a short period
408 * of time to avoid removing entry from the list before
413 set_current_state(TASK_RUNNING
);
414 remove_wait_queue(&entry
->compl, &wait
);
416 /* If entry->list is still in the list, it must be removed
417 * first and in this case prism2_cmd_ev() does not yet have
418 * local reference to it, and the data can be kfree()'d
419 * here. If the command completion event is still generated,
420 * it will be assigned to next (possibly) pending command, but
421 * the driver will reset the card anyway due to timeout
423 * If the entry is not in the list prism2_cmd_ev() has a local
424 * reference to it, but keeps cmdlock as long as the data is
425 * needed, so the data can be kfree()'d here. */
427 /* FIX: if the entry->list is in the list, it has not been completed
428 * yet, so removing it here is somewhat wrong.. this could cause
429 * references to freed memory and next list_del() causing NULL pointer
430 * dereference.. it would probably be better to leave the entry in the
431 * list and the list should be emptied during hw reset */
433 spin_lock_irqsave(&local
->cmdlock
, flags
);
434 if (!list_empty(&entry
->list
)) {
435 printk(KERN_DEBUG
"%s: hfa384x_cmd: entry still in list? "
436 "(entry=%p, type=%d, res=%d)\n", dev
->name
, entry
,
438 list_del_init(&entry
->list
);
439 local
->cmd_queue_len
--;
441 spin_unlock_irqrestore(&local
->cmdlock
, flags
);
444 printk(KERN_DEBUG
"%s: hfa384x_cmd: interrupted; err=%d\n",
450 if (entry
->type
!= CMD_COMPLETED
) {
451 u16 reg
= HFA384X_INW(HFA384X_EVSTAT_OFF
);
452 printk(KERN_DEBUG
"%s: hfa384x_cmd: command was not "
453 "completed (res=%d, entry=%p, type=%d, cmd=0x%04x, "
454 "param0=0x%04x, EVSTAT=%04x INTEN=%04x)\n", dev
->name
,
455 res
, entry
, entry
->type
, entry
->cmd
, entry
->param0
, reg
,
456 HFA384X_INW(HFA384X_INTEN_OFF
));
457 if (reg
& HFA384X_EV_CMD
) {
458 /* Command completion event is pending, but the
459 * interrupt was not delivered - probably an issue
460 * with pcmcia-cs configuration. */
461 printk(KERN_WARNING
"%s: interrupt delivery does not "
462 "seem to work\n", dev
->name
);
464 prism2_io_debug_error(dev
, 3);
470 *resp0
= entry
->resp0
;
471 #ifndef final_version
473 printk(KERN_DEBUG
"%s: CMD=0x%04x => res=0x%02x, "
475 dev
->name
, cmd
, entry
->res
, entry
->resp0
);
477 #endif /* final_version */
481 hostap_cmd_queue_free(local
, entry
, 1);
487 * hfa384x_cmd_callback - Issue a Prism2 command; callback when completed
488 * @dev: pointer to net_device
489 * @cmd: Prism2 command code (HFA384X_CMD_CODE_*)
490 * @param0: value for Param0 register
491 * @callback: command completion callback function (%NULL = no callback)
492 * @context: context data to be given to the callback function
494 * Issue given command (possibly after waiting in command queue) and use
495 * callback function to indicate command completion. This can be called both
496 * from user and interrupt context. The callback function will be called in
497 * hardware IRQ context. It can be %NULL, when no function is called when
498 * command is completed.
500 static int hfa384x_cmd_callback(struct net_device
*dev
, u16 cmd
, u16 param0
,
501 void (*callback
)(struct net_device
*dev
,
502 long context
, u16 resp0
,
506 struct hostap_interface
*iface
;
510 struct hostap_cmd_queue
*entry
;
512 iface
= netdev_priv(dev
);
513 local
= iface
->local
;
515 if (local
->cmd_queue_len
>= HOSTAP_CMD_QUEUE_MAX_LEN
+ 2) {
516 printk(KERN_DEBUG
"%s: hfa384x_cmd: cmd_queue full\n",
521 entry
= (struct hostap_cmd_queue
*)
522 kmalloc(sizeof(*entry
), GFP_ATOMIC
);
524 printk(KERN_DEBUG
"%s: hfa384x_cmd_callback - kmalloc "
525 "failed\n", dev
->name
);
528 memset(entry
, 0, sizeof(*entry
));
529 atomic_set(&entry
->usecnt
, 1);
530 entry
->type
= CMD_CALLBACK
;
532 entry
->param0
= param0
;
533 entry
->callback
= callback
;
534 entry
->context
= context
;
536 spin_lock_irqsave(&local
->cmdlock
, flags
);
537 issue
= list_empty(&local
->cmd_queue
);
540 list_add_tail(&entry
->list
, &local
->cmd_queue
);
541 local
->cmd_queue_len
++;
542 spin_unlock_irqrestore(&local
->cmdlock
, flags
);
544 if (issue
&& hfa384x_cmd_issue(dev
, entry
))
549 hostap_cmd_queue_free(local
, entry
, ret
);
556 * __hfa384x_cmd_no_wait - Issue a Prism2 command (private)
557 * @dev: pointer to net_device
558 * @cmd: Prism2 command code (HFA384X_CMD_CODE_*)
559 * @param0: value for Param0 register
560 * @io_debug_num: I/O debug error number
562 * Shared helper function for hfa384x_cmd_wait() and hfa384x_cmd_no_wait().
564 static int __hfa384x_cmd_no_wait(struct net_device
*dev
, u16 cmd
, u16 param0
,
570 /* wait until busy bit is clear; this should always be clear since the
571 * commands are serialized */
572 tries
= HFA384X_CMD_BUSY_TIMEOUT
;
573 while (HFA384X_INW(HFA384X_CMD_OFF
) & HFA384X_CMD_BUSY
&& tries
> 0) {
578 reg
= HFA384X_INW(HFA384X_CMD_OFF
);
579 prism2_io_debug_error(dev
, io_debug_num
);
580 printk(KERN_DEBUG
"%s: __hfa384x_cmd_no_wait(%d) - timeout - "
581 "reg=0x%04x\n", dev
->name
, io_debug_num
, reg
);
586 HFA384X_OUTW(param0
, HFA384X_PARAM0_OFF
);
587 HFA384X_OUTW(cmd
, HFA384X_CMD_OFF
);
594 * hfa384x_cmd_wait - Issue a Prism2 command and busy wait for completion
595 * @dev: pointer to net_device
596 * @cmd: Prism2 command code (HFA384X_CMD_CODE_*)
597 * @param0: value for Param0 register
599 static int hfa384x_cmd_wait(struct net_device
*dev
, u16 cmd
, u16 param0
)
604 res
= __hfa384x_cmd_no_wait(dev
, cmd
, param0
, 4);
608 /* wait for command completion */
609 if ((cmd
& HFA384X_CMDCODE_MASK
) == HFA384X_CMDCODE_DOWNLOAD
)
610 tries
= HFA384X_DL_COMPL_TIMEOUT
;
612 tries
= HFA384X_CMD_COMPL_TIMEOUT
;
614 while (!(HFA384X_INW(HFA384X_EVSTAT_OFF
) & HFA384X_EV_CMD
) &&
620 reg
= HFA384X_INW(HFA384X_EVSTAT_OFF
);
621 prism2_io_debug_error(dev
, 5);
622 printk(KERN_DEBUG
"%s: hfa384x_cmd_wait - timeout2 - "
623 "reg=0x%04x\n", dev
->name
, reg
);
627 res
= (HFA384X_INW(HFA384X_STATUS_OFF
) &
628 (BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10) | BIT(9) |
630 #ifndef final_version
632 printk(KERN_DEBUG
"%s: CMD=0x%04x => res=0x%02x\n",
633 dev
->name
, cmd
, res
);
637 HFA384X_OUTW(HFA384X_EV_CMD
, HFA384X_EVACK_OFF
);
644 * hfa384x_cmd_no_wait - Issue a Prism2 command; do not wait for completion
645 * @dev: pointer to net_device
646 * @cmd: Prism2 command code (HFA384X_CMD_CODE_*)
647 * @param0: value for Param0 register
649 static inline int hfa384x_cmd_no_wait(struct net_device
*dev
, u16 cmd
,
652 return __hfa384x_cmd_no_wait(dev
, cmd
, param0
, 6);
657 * prism2_cmd_ev - Prism2 command completion event handler
658 * @dev: pointer to net_device
660 * Interrupt handler for command completion events. Called by the main
661 * interrupt handler in hardware IRQ context. Read Resp0 and status registers
662 * from the hardware and ACK the event. Depending on the issued command type
663 * either wake up the sleeping process that is waiting for command completion
664 * or call the callback function. Issue the next command, if one is pending.
666 static void prism2_cmd_ev(struct net_device
*dev
)
668 struct hostap_interface
*iface
;
670 struct hostap_cmd_queue
*entry
= NULL
;
672 iface
= netdev_priv(dev
);
673 local
= iface
->local
;
675 spin_lock(&local
->cmdlock
);
676 if (!list_empty(&local
->cmd_queue
)) {
677 entry
= list_entry(local
->cmd_queue
.next
,
678 struct hostap_cmd_queue
, list
);
679 atomic_inc(&entry
->usecnt
);
680 list_del_init(&entry
->list
);
681 local
->cmd_queue_len
--;
683 if (!entry
->issued
) {
684 printk(KERN_DEBUG
"%s: Command completion event, but "
685 "cmd not issued\n", dev
->name
);
686 __hostap_cmd_queue_free(local
, entry
, 1);
690 spin_unlock(&local
->cmdlock
);
693 HFA384X_OUTW(HFA384X_EV_CMD
, HFA384X_EVACK_OFF
);
694 printk(KERN_DEBUG
"%s: Command completion event, but no "
695 "pending commands\n", dev
->name
);
699 entry
->resp0
= HFA384X_INW(HFA384X_RESP0_OFF
);
700 entry
->res
= (HFA384X_INW(HFA384X_STATUS_OFF
) &
701 (BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10) |
702 BIT(9) | BIT(8))) >> 8;
703 HFA384X_OUTW(HFA384X_EV_CMD
, HFA384X_EVACK_OFF
);
705 /* TODO: rest of the CmdEv handling could be moved to tasklet */
706 if (entry
->type
== CMD_SLEEP
) {
707 entry
->type
= CMD_COMPLETED
;
708 wake_up_interruptible(&entry
->compl);
709 } else if (entry
->type
== CMD_CALLBACK
) {
711 entry
->callback(dev
, entry
->context
, entry
->resp0
,
714 printk(KERN_DEBUG
"%s: Invalid command completion type %d\n",
715 dev
->name
, entry
->type
);
717 hostap_cmd_queue_free(local
, entry
, 1);
719 /* issue next command, if pending */
721 spin_lock(&local
->cmdlock
);
722 if (!list_empty(&local
->cmd_queue
)) {
723 entry
= list_entry(local
->cmd_queue
.next
,
724 struct hostap_cmd_queue
, list
);
725 if (entry
->issuing
) {
726 /* hfa384x_cmd() has already started issuing this
727 * command, so do not start here */
731 atomic_inc(&entry
->usecnt
);
733 spin_unlock(&local
->cmdlock
);
736 /* issue next command; if command issuing fails, remove the
737 * entry from cmd_queue */
738 int res
= hfa384x_cmd_issue(dev
, entry
);
739 spin_lock(&local
->cmdlock
);
740 __hostap_cmd_queue_free(local
, entry
, res
);
741 spin_unlock(&local
->cmdlock
);
746 static inline int hfa384x_wait_offset(struct net_device
*dev
, u16 o_off
)
748 int tries
= HFA384X_BAP_BUSY_TIMEOUT
;
749 int res
= HFA384X_INW(o_off
) & HFA384X_OFFSET_BUSY
;
751 while (res
&& tries
> 0) {
754 res
= HFA384X_INW(o_off
) & HFA384X_OFFSET_BUSY
;
760 /* Offset must be even */
761 static int hfa384x_setup_bap(struct net_device
*dev
, u16 bap
, u16 id
,
767 if (offset
% 2 || bap
> 1)
771 o_off
= HFA384X_OFFSET1_OFF
;
772 s_off
= HFA384X_SELECT1_OFF
;
774 o_off
= HFA384X_OFFSET0_OFF
;
775 s_off
= HFA384X_SELECT0_OFF
;
778 if (hfa384x_wait_offset(dev
, o_off
)) {
779 prism2_io_debug_error(dev
, 7);
780 printk(KERN_DEBUG
"%s: hfa384x_setup_bap - timeout before\n",
786 HFA384X_OUTW(id
, s_off
);
787 HFA384X_OUTW(offset
, o_off
);
789 if (hfa384x_wait_offset(dev
, o_off
)) {
790 prism2_io_debug_error(dev
, 8);
791 printk(KERN_DEBUG
"%s: hfa384x_setup_bap - timeout after\n",
796 #ifndef final_version
797 if (HFA384X_INW(o_off
) & HFA384X_OFFSET_ERR
) {
798 prism2_io_debug_error(dev
, 9);
799 printk(KERN_DEBUG
"%s: hfa384x_setup_bap - offset error "
800 "(%d,0x04%x,%d); reg=0x%04x\n",
801 dev
->name
, bap
, id
, offset
, HFA384X_INW(o_off
));
811 static int hfa384x_get_rid(struct net_device
*dev
, u16 rid
, void *buf
, int len
,
814 struct hostap_interface
*iface
;
817 struct hfa384x_rid_hdr rec
;
819 iface
= netdev_priv(dev
);
820 local
= iface
->local
;
823 printk(KERN_DEBUG
"%s: cannot get RID %04x (len=%d) - no PRI "
824 "f/w\n", dev
->name
, rid
, len
);
825 return -ENOTTY
; /* Well.. not really correct, but return
826 * something unique enough.. */
829 if ((local
->func
->card_present
&& !local
->func
->card_present(local
)) ||
830 local
->hw_downloading
)
833 res
= down_interruptible(&local
->rid_bap_sem
);
837 res
= hfa384x_cmd(dev
, HFA384X_CMDCODE_ACCESS
, rid
, NULL
, NULL
);
839 printk(KERN_DEBUG
"%s: hfa384x_get_rid: CMDCODE_ACCESS failed "
840 "(res=%d, rid=%04x, len=%d)\n",
841 dev
->name
, res
, rid
, len
);
842 up(&local
->rid_bap_sem
);
846 spin_lock_bh(&local
->baplock
);
848 res
= hfa384x_setup_bap(dev
, BAP0
, rid
, 0);
850 res
= hfa384x_from_bap(dev
, BAP0
, &rec
, sizeof(rec
));
852 if (le16_to_cpu(rec
.len
) == 0) {
853 /* RID not available */
857 rlen
= (le16_to_cpu(rec
.len
) - 1) * 2;
858 if (!res
&& exact_len
&& rlen
!= len
) {
859 printk(KERN_DEBUG
"%s: hfa384x_get_rid - RID len mismatch: "
860 "rid=0x%04x, len=%d (expected %d)\n",
861 dev
->name
, rid
, rlen
, len
);
866 res
= hfa384x_from_bap(dev
, BAP0
, buf
, len
);
868 spin_unlock_bh(&local
->baplock
);
869 up(&local
->rid_bap_sem
);
873 printk(KERN_DEBUG
"%s: hfa384x_get_rid (rid=%04x, "
874 "len=%d) - failed - res=%d\n", dev
->name
, rid
,
876 if (res
== -ETIMEDOUT
)
877 prism2_hw_reset(dev
);
885 static int hfa384x_set_rid(struct net_device
*dev
, u16 rid
, void *buf
, int len
)
887 struct hostap_interface
*iface
;
889 struct hfa384x_rid_hdr rec
;
892 iface
= netdev_priv(dev
);
893 local
= iface
->local
;
896 printk(KERN_DEBUG
"%s: cannot set RID %04x (len=%d) - no PRI "
897 "f/w\n", dev
->name
, rid
, len
);
898 return -ENOTTY
; /* Well.. not really correct, but return
899 * something unique enough.. */
902 if ((local
->func
->card_present
&& !local
->func
->card_present(local
)) ||
903 local
->hw_downloading
)
906 rec
.rid
= cpu_to_le16(rid
);
907 /* RID len in words and +1 for rec.rid */
908 rec
.len
= cpu_to_le16(len
/ 2 + len
% 2 + 1);
910 res
= down_interruptible(&local
->rid_bap_sem
);
914 spin_lock_bh(&local
->baplock
);
915 res
= hfa384x_setup_bap(dev
, BAP0
, rid
, 0);
917 res
= hfa384x_to_bap(dev
, BAP0
, &rec
, sizeof(rec
));
919 res
= hfa384x_to_bap(dev
, BAP0
, buf
, len
);
920 spin_unlock_bh(&local
->baplock
);
923 printk(KERN_DEBUG
"%s: hfa384x_set_rid (rid=%04x, len=%d) - "
924 "failed - res=%d\n", dev
->name
, rid
, len
, res
);
925 up(&local
->rid_bap_sem
);
929 res
= hfa384x_cmd(dev
, HFA384X_CMDCODE_ACCESS_WRITE
, rid
, NULL
, NULL
);
930 up(&local
->rid_bap_sem
);
932 printk(KERN_DEBUG
"%s: hfa384x_set_rid: CMDCODE_ACCESS_WRITE "
933 "failed (res=%d, rid=%04x, len=%d)\n",
934 dev
->name
, res
, rid
, len
);
938 if (res
== -ETIMEDOUT
)
939 prism2_hw_reset(dev
);
945 static void hfa384x_disable_interrupts(struct net_device
*dev
)
947 /* disable interrupts and clear event status */
948 HFA384X_OUTW(0, HFA384X_INTEN_OFF
);
949 HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF
);
953 static void hfa384x_enable_interrupts(struct net_device
*dev
)
955 /* ack pending events and enable interrupts from selected events */
956 HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF
);
957 HFA384X_OUTW(HFA384X_EVENT_MASK
, HFA384X_INTEN_OFF
);
961 static void hfa384x_events_no_bap0(struct net_device
*dev
)
963 HFA384X_OUTW(HFA384X_EVENT_MASK
& ~HFA384X_BAP0_EVENTS
,
968 static void hfa384x_events_all(struct net_device
*dev
)
970 HFA384X_OUTW(HFA384X_EVENT_MASK
, HFA384X_INTEN_OFF
);
974 static void hfa384x_events_only_cmd(struct net_device
*dev
)
976 HFA384X_OUTW(HFA384X_EV_CMD
, HFA384X_INTEN_OFF
);
980 static u16
hfa384x_allocate_fid(struct net_device
*dev
, int len
)
985 /* FIX: this could be replace with hfa384x_cmd() if the Alloc event
986 * below would be handled like CmdCompl event (sleep here, wake up from
987 * interrupt handler */
988 if (hfa384x_cmd_wait(dev
, HFA384X_CMDCODE_ALLOC
, len
)) {
989 printk(KERN_DEBUG
"%s: cannot allocate fid, len=%d\n",
994 delay
= jiffies
+ HFA384X_ALLOC_COMPL_TIMEOUT
;
995 while (!(HFA384X_INW(HFA384X_EVSTAT_OFF
) & HFA384X_EV_ALLOC
) &&
996 time_before(jiffies
, delay
))
998 if (!(HFA384X_INW(HFA384X_EVSTAT_OFF
) & HFA384X_EV_ALLOC
)) {
999 printk("%s: fid allocate, len=%d - timeout\n", dev
->name
, len
);
1003 fid
= HFA384X_INW(HFA384X_ALLOCFID_OFF
);
1004 HFA384X_OUTW(HFA384X_EV_ALLOC
, HFA384X_EVACK_OFF
);
1010 static int prism2_reset_port(struct net_device
*dev
)
1012 struct hostap_interface
*iface
;
1013 local_info_t
*local
;
1016 iface
= netdev_priv(dev
);
1017 local
= iface
->local
;
1019 if (!local
->dev_enabled
)
1022 res
= hfa384x_cmd(dev
, HFA384X_CMDCODE_DISABLE
, 0,
1025 printk(KERN_DEBUG
"%s: reset port failed to disable port\n",
1028 res
= hfa384x_cmd(dev
, HFA384X_CMDCODE_ENABLE
, 0,
1031 printk(KERN_DEBUG
"%s: reset port failed to enable "
1032 "port\n", dev
->name
);
1035 /* It looks like at least some STA firmware versions reset
1036 * fragmentation threshold back to 2346 after enable command. Restore
1037 * the configured value, if it differs from this default. */
1038 if (local
->fragm_threshold
!= 2346 &&
1039 hostap_set_word(dev
, HFA384X_RID_FRAGMENTATIONTHRESHOLD
,
1040 local
->fragm_threshold
)) {
1041 printk(KERN_DEBUG
"%s: failed to restore fragmentation "
1042 "threshold (%d) after Port0 enable\n",
1043 dev
->name
, local
->fragm_threshold
);
1050 static int prism2_get_version_info(struct net_device
*dev
, u16 rid
,
1053 struct hfa384x_comp_ident comp
;
1054 struct hostap_interface
*iface
;
1055 local_info_t
*local
;
1057 iface
= netdev_priv(dev
);
1058 local
= iface
->local
;
1060 if (local
->no_pri
) {
1061 /* PRI f/w not yet available - cannot read RIDs */
1064 if (hfa384x_get_rid(dev
, rid
, &comp
, sizeof(comp
), 1) < 0) {
1065 printk(KERN_DEBUG
"Could not get RID for component %s\n", txt
);
1069 printk(KERN_INFO
"%s: %s: id=0x%02x v%d.%d.%d\n", dev
->name
, txt
,
1070 __le16_to_cpu(comp
.id
), __le16_to_cpu(comp
.major
),
1071 __le16_to_cpu(comp
.minor
), __le16_to_cpu(comp
.variant
));
1076 static int prism2_setup_rids(struct net_device
*dev
)
1078 struct hostap_interface
*iface
;
1079 local_info_t
*local
;
1083 iface
= netdev_priv(dev
);
1084 local
= iface
->local
;
1086 hostap_set_word(dev
, HFA384X_RID_TICKTIME
, 2000);
1088 if (!local
->fw_ap
) {
1089 tmp
= hostap_get_porttype(local
);
1090 ret
= hostap_set_word(dev
, HFA384X_RID_CNFPORTTYPE
, tmp
);
1092 printk("%s: Port type setting to %d failed\n",
1098 /* Setting SSID to empty string seems to kill the card in Host AP mode
1100 if (local
->iw_mode
!= IW_MODE_MASTER
|| local
->essid
[0] != '\0') {
1101 ret
= hostap_set_string(dev
, HFA384X_RID_CNFOWNSSID
,
1104 printk("%s: AP own SSID setting failed\n", dev
->name
);
1109 ret
= hostap_set_word(dev
, HFA384X_RID_CNFMAXDATALEN
,
1110 PRISM2_DATA_MAXLEN
);
1112 printk("%s: MAC data length setting to %d failed\n",
1113 dev
->name
, PRISM2_DATA_MAXLEN
);
1117 if (hfa384x_get_rid(dev
, HFA384X_RID_CHANNELLIST
, &tmp
, 2, 1) < 0) {
1118 printk("%s: Channel list read failed\n", dev
->name
);
1122 local
->channel_mask
= __le16_to_cpu(tmp
);
1124 if (local
->channel
< 1 || local
->channel
> 14 ||
1125 !(local
->channel_mask
& (1 << (local
->channel
- 1)))) {
1126 printk(KERN_WARNING
"%s: Channel setting out of range "
1127 "(%d)!\n", dev
->name
, local
->channel
);
1132 ret
= hostap_set_word(dev
, HFA384X_RID_CNFOWNCHANNEL
, local
->channel
);
1134 printk("%s: Channel setting to %d failed\n",
1135 dev
->name
, local
->channel
);
1139 ret
= hostap_set_word(dev
, HFA384X_RID_CNFBEACONINT
,
1142 printk("%s: Beacon interval setting to %d failed\n",
1143 dev
->name
, local
->beacon_int
);
1144 /* this may fail with Symbol/Lucent firmware */
1145 if (ret
== -ETIMEDOUT
)
1149 ret
= hostap_set_word(dev
, HFA384X_RID_CNFOWNDTIMPERIOD
,
1150 local
->dtim_period
);
1152 printk("%s: DTIM period setting to %d failed\n",
1153 dev
->name
, local
->dtim_period
);
1154 /* this may fail with Symbol/Lucent firmware */
1155 if (ret
== -ETIMEDOUT
)
1159 ret
= hostap_set_word(dev
, HFA384X_RID_PROMISCUOUSMODE
,
1162 printk(KERN_INFO
"%s: Setting promiscuous mode (%d) failed\n",
1163 dev
->name
, local
->is_promisc
);
1165 if (!local
->fw_ap
) {
1166 ret
= hostap_set_string(dev
, HFA384X_RID_CNFDESIREDSSID
,
1169 printk("%s: Desired SSID setting failed\n", dev
->name
);
1174 /* Setup TXRateControl, defaults to allow use of 1, 2, 5.5, and
1175 * 11 Mbps in automatic TX rate fallback and 1 and 2 Mbps as basic
1177 if (local
->tx_rate_control
== 0) {
1178 local
->tx_rate_control
=
1179 HFA384X_RATES_1MBPS
|
1180 HFA384X_RATES_2MBPS
|
1181 HFA384X_RATES_5MBPS
|
1182 HFA384X_RATES_11MBPS
;
1184 if (local
->basic_rates
== 0)
1185 local
->basic_rates
= HFA384X_RATES_1MBPS
| HFA384X_RATES_2MBPS
;
1187 if (!local
->fw_ap
) {
1188 ret
= hostap_set_word(dev
, HFA384X_RID_TXRATECONTROL
,
1189 local
->tx_rate_control
);
1191 printk("%s: TXRateControl setting to %d failed\n",
1192 dev
->name
, local
->tx_rate_control
);
1196 ret
= hostap_set_word(dev
, HFA384X_RID_CNFSUPPORTEDRATES
,
1197 local
->tx_rate_control
);
1199 printk("%s: cnfSupportedRates setting to %d failed\n",
1200 dev
->name
, local
->tx_rate_control
);
1203 ret
= hostap_set_word(dev
, HFA384X_RID_CNFBASICRATES
,
1204 local
->basic_rates
);
1206 printk("%s: cnfBasicRates setting to %d failed\n",
1207 dev
->name
, local
->basic_rates
);
1210 ret
= hostap_set_word(dev
, HFA384X_RID_CREATEIBSS
, 1);
1212 printk("%s: Create IBSS setting to 1 failed\n",
1217 if (local
->name_set
)
1218 (void) hostap_set_string(dev
, HFA384X_RID_CNFOWNNAME
,
1221 if (hostap_set_encryption(local
)) {
1222 printk(KERN_INFO
"%s: could not configure encryption\n",
1226 (void) hostap_set_antsel(local
);
1228 if (hostap_set_roaming(local
)) {
1229 printk(KERN_INFO
"%s: could not set host roaming\n",
1233 if (local
->sta_fw_ver
>= PRISM2_FW_VER(1,6,3) &&
1234 hostap_set_word(dev
, HFA384X_RID_CNFENHSECURITY
, local
->enh_sec
))
1235 printk(KERN_INFO
"%s: cnfEnhSecurity setting to 0x%x failed\n",
1236 dev
->name
, local
->enh_sec
);
1238 /* 32-bit tallies were added in STA f/w 0.8.0, but they were apparently
1239 * not working correctly (last seven counters report bogus values).
1240 * This has been fixed in 0.8.2, so enable 32-bit tallies only
1241 * beginning with that firmware version. Another bug fix for 32-bit
1242 * tallies in 1.4.0; should 16-bit tallies be used for some other
1244 if (local
->sta_fw_ver
>= PRISM2_FW_VER(0,8,2)) {
1245 if (hostap_set_word(dev
, HFA384X_RID_CNFTHIRTY2TALLY
, 1)) {
1246 printk(KERN_INFO
"%s: cnfThirty2Tally setting "
1247 "failed\n", dev
->name
);
1248 local
->tallies32
= 0;
1250 local
->tallies32
= 1;
1252 local
->tallies32
= 0;
1254 hostap_set_auth_algs(local
);
1256 if (hostap_set_word(dev
, HFA384X_RID_FRAGMENTATIONTHRESHOLD
,
1257 local
->fragm_threshold
)) {
1258 printk(KERN_INFO
"%s: setting FragmentationThreshold to %d "
1259 "failed\n", dev
->name
, local
->fragm_threshold
);
1262 if (hostap_set_word(dev
, HFA384X_RID_RTSTHRESHOLD
,
1263 local
->rts_threshold
)) {
1264 printk(KERN_INFO
"%s: setting RTSThreshold to %d failed\n",
1265 dev
->name
, local
->rts_threshold
);
1268 if (local
->manual_retry_count
>= 0 &&
1269 hostap_set_word(dev
, HFA384X_RID_CNFALTRETRYCOUNT
,
1270 local
->manual_retry_count
)) {
1271 printk(KERN_INFO
"%s: setting cnfAltRetryCount to %d failed\n",
1272 dev
->name
, local
->manual_retry_count
);
1275 if (local
->sta_fw_ver
>= PRISM2_FW_VER(1,3,1) &&
1276 hfa384x_get_rid(dev
, HFA384X_RID_CNFDBMADJUST
, &tmp
, 2, 1) == 2) {
1277 local
->rssi_to_dBm
= le16_to_cpu(tmp
);
1280 if (local
->sta_fw_ver
>= PRISM2_FW_VER(1,7,0) && local
->wpa
&&
1281 hostap_set_word(dev
, HFA384X_RID_SSNHANDLINGMODE
, 1)) {
1282 printk(KERN_INFO
"%s: setting ssnHandlingMode to 1 failed\n",
1286 if (local
->sta_fw_ver
>= PRISM2_FW_VER(1,7,0) && local
->generic_elem
&&
1287 hfa384x_set_rid(dev
, HFA384X_RID_GENERICELEMENT
,
1288 local
->generic_elem
, local
->generic_elem_len
)) {
1289 printk(KERN_INFO
"%s: setting genericElement failed\n",
1298 static int prism2_hw_init(struct net_device
*dev
, int initial
)
1300 struct hostap_interface
*iface
;
1301 local_info_t
*local
;
1303 unsigned long start
, delay
;
1305 PDEBUG(DEBUG_FLOW
, "prism2_hw_init()\n");
1307 iface
= netdev_priv(dev
);
1308 local
= iface
->local
;
1310 clear_bit(HOSTAP_BITS_TRANSMIT
, &local
->bits
);
1313 /* initialize HFA 384x */
1314 ret
= hfa384x_cmd_no_wait(dev
, HFA384X_CMDCODE_INIT
, 0);
1316 printk(KERN_INFO
"%s: first command failed - assuming card "
1317 "does not have primary firmware\n", dev_info
);
1320 if (first
&& (HFA384X_INW(HFA384X_EVSTAT_OFF
) & HFA384X_EV_CMD
)) {
1321 /* EvStat has Cmd bit set in some cases, so retry once if no
1322 * wait was needed */
1323 HFA384X_OUTW(HFA384X_EV_CMD
, HFA384X_EVACK_OFF
);
1324 printk(KERN_DEBUG
"%s: init command completed too quickly - "
1325 "retrying\n", dev
->name
);
1331 delay
= jiffies
+ HFA384X_INIT_TIMEOUT
;
1332 while (!(HFA384X_INW(HFA384X_EVSTAT_OFF
) & HFA384X_EV_CMD
) &&
1333 time_before(jiffies
, delay
))
1335 if (!(HFA384X_INW(HFA384X_EVSTAT_OFF
) & HFA384X_EV_CMD
)) {
1336 printk(KERN_DEBUG
"%s: assuming no Primary image in "
1337 "flash - card initialization not completed\n",
1340 #ifdef PRISM2_DOWNLOAD_SUPPORT
1341 if (local
->sram_type
== -1)
1342 local
->sram_type
= prism2_get_ram_size(local
);
1343 #endif /* PRISM2_DOWNLOAD_SUPPORT */
1347 printk(KERN_DEBUG
"prism2_hw_init: initialized in %lu ms\n",
1348 (jiffies
- start
) * 1000 / HZ
);
1349 HFA384X_OUTW(HFA384X_EV_CMD
, HFA384X_EVACK_OFF
);
1354 static int prism2_hw_init2(struct net_device
*dev
, int initial
)
1356 struct hostap_interface
*iface
;
1357 local_info_t
*local
;
1360 iface
= netdev_priv(dev
);
1361 local
= iface
->local
;
1363 #ifdef PRISM2_DOWNLOAD_SUPPORT
1368 local
->pda
= prism2_read_pda(dev
);
1369 #endif /* PRISM2_DOWNLOAD_SUPPORT */
1371 hfa384x_disable_interrupts(dev
);
1373 #ifndef final_version
1374 HFA384X_OUTW(HFA384X_MAGIC
, HFA384X_SWSUPPORT0_OFF
);
1375 if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF
) != HFA384X_MAGIC
) {
1376 printk("SWSUPPORT0 write/read failed: %04X != %04X\n",
1377 HFA384X_INW(HFA384X_SWSUPPORT0_OFF
), HFA384X_MAGIC
);
1382 if (initial
|| local
->pri_only
) {
1383 hfa384x_events_only_cmd(dev
);
1384 /* get card version information */
1385 if (prism2_get_version_info(dev
, HFA384X_RID_NICID
, "NIC") ||
1386 prism2_get_version_info(dev
, HFA384X_RID_PRIID
, "PRI")) {
1387 hfa384x_disable_interrupts(dev
);
1391 if (prism2_get_version_info(dev
, HFA384X_RID_STAID
, "STA")) {
1392 printk(KERN_DEBUG
"%s: Failed to read STA f/w version "
1393 "- only Primary f/w present\n", dev
->name
);
1394 local
->pri_only
= 1;
1397 local
->pri_only
= 0;
1398 hfa384x_disable_interrupts(dev
);
1401 /* FIX: could convert allocate_fid to use sleeping CmdCompl wait and
1402 * enable interrupts before this. This would also require some sort of
1403 * sleeping AllocEv waiting */
1405 /* allocate TX FIDs */
1406 local
->txfid_len
= PRISM2_TXFID_LEN
;
1407 for (i
= 0; i
< PRISM2_TXFID_COUNT
; i
++) {
1408 local
->txfid
[i
] = hfa384x_allocate_fid(dev
, local
->txfid_len
);
1409 if (local
->txfid
[i
] == 0xffff && local
->txfid_len
> 1600) {
1410 local
->txfid
[i
] = hfa384x_allocate_fid(dev
, 1600);
1411 if (local
->txfid
[i
] != 0xffff) {
1412 printk(KERN_DEBUG
"%s: Using shorter TX FID "
1413 "(1600 bytes)\n", dev
->name
);
1414 local
->txfid_len
= 1600;
1417 if (local
->txfid
[i
] == 0xffff)
1419 local
->intransmitfid
[i
] = PRISM2_TXFID_EMPTY
;
1422 hfa384x_events_only_cmd(dev
);
1425 struct list_head
*ptr
;
1426 prism2_check_sta_fw_version(local
);
1428 if (hfa384x_get_rid(dev
, HFA384X_RID_CNFOWNMACADDR
,
1429 &dev
->dev_addr
, 6, 1) < 0) {
1430 printk("%s: could not get own MAC address\n",
1433 list_for_each(ptr
, &local
->hostap_interfaces
) {
1434 iface
= list_entry(ptr
, struct hostap_interface
, list
);
1435 memcpy(iface
->dev
->dev_addr
, dev
->dev_addr
, ETH_ALEN
);
1437 } else if (local
->fw_ap
)
1438 prism2_check_sta_fw_version(local
);
1440 prism2_setup_rids(dev
);
1442 /* MAC is now configured, but port 0 is not yet enabled */
1447 printk(KERN_WARNING
"%s: Initialization failed\n", dev_info
);
1452 static int prism2_hw_enable(struct net_device
*dev
, int initial
)
1454 struct hostap_interface
*iface
;
1455 local_info_t
*local
;
1458 iface
= netdev_priv(dev
);
1459 local
= iface
->local
;
1460 was_resetting
= local
->hw_resetting
;
1462 if (hfa384x_cmd(dev
, HFA384X_CMDCODE_ENABLE
, 0, NULL
, NULL
)) {
1463 printk("%s: MAC port 0 enabling failed\n", dev
->name
);
1467 local
->hw_ready
= 1;
1468 local
->hw_reset_tries
= 0;
1469 local
->hw_resetting
= 0;
1470 hfa384x_enable_interrupts(dev
);
1472 /* at least D-Link DWL-650 seems to require additional port reset
1473 * before it starts acting as an AP, so reset port automatically
1474 * here just in case */
1475 if (initial
&& prism2_reset_port(dev
)) {
1476 printk("%s: MAC port 0 reseting failed\n", dev
->name
);
1480 if (was_resetting
&& netif_queue_stopped(dev
)) {
1481 /* If hw_reset() was called during pending transmit, netif
1482 * queue was stopped. Wake it up now since the wlan card has
1484 netif_wake_queue(dev
);
1491 static int prism2_hw_config(struct net_device
*dev
, int initial
)
1493 struct hostap_interface
*iface
;
1494 local_info_t
*local
;
1496 iface
= netdev_priv(dev
);
1497 local
= iface
->local
;
1499 if (local
->hw_downloading
)
1502 if (prism2_hw_init(dev
, initial
)) {
1503 return local
->no_pri
? 0 : 1;
1506 if (prism2_hw_init2(dev
, initial
))
1509 /* Enable firmware if secondary image is loaded and at least one of the
1510 * netdevices is up. */
1511 if (!local
->pri_only
&&
1512 (initial
== 0 || (initial
== 2 && local
->num_dev_open
> 0))) {
1513 if (!local
->dev_enabled
)
1514 prism2_callback(local
, PRISM2_CALLBACK_ENABLE
);
1515 local
->dev_enabled
= 1;
1516 return prism2_hw_enable(dev
, initial
);
1523 static void prism2_hw_shutdown(struct net_device
*dev
, int no_disable
)
1525 struct hostap_interface
*iface
;
1526 local_info_t
*local
;
1528 iface
= netdev_priv(dev
);
1529 local
= iface
->local
;
1531 /* Allow only command completion events during disable */
1532 hfa384x_events_only_cmd(dev
);
1534 local
->hw_ready
= 0;
1535 if (local
->dev_enabled
)
1536 prism2_callback(local
, PRISM2_CALLBACK_DISABLE
);
1537 local
->dev_enabled
= 0;
1539 if (local
->func
->card_present
&& !local
->func
->card_present(local
)) {
1540 printk(KERN_DEBUG
"%s: card already removed or not configured "
1541 "during shutdown\n", dev
->name
);
1545 if ((no_disable
& HOSTAP_HW_NO_DISABLE
) == 0 &&
1546 hfa384x_cmd(dev
, HFA384X_CMDCODE_DISABLE
, 0, NULL
, NULL
))
1547 printk(KERN_WARNING
"%s: Shutdown failed\n", dev_info
);
1549 hfa384x_disable_interrupts(dev
);
1551 if (no_disable
& HOSTAP_HW_ENABLE_CMDCOMPL
)
1552 hfa384x_events_only_cmd(dev
);
1554 prism2_clear_cmd_queue(local
);
1558 static void prism2_hw_reset(struct net_device
*dev
)
1560 struct hostap_interface
*iface
;
1561 local_info_t
*local
;
1564 static long last_reset
= 0;
1566 /* do not reset card more than once per second to avoid ending up in a
1567 * busy loop reseting the card */
1568 if (time_before_eq(jiffies
, last_reset
+ HZ
))
1570 last_reset
= jiffies
;
1573 iface
= netdev_priv(dev
);
1574 local
= iface
->local
;
1576 if (in_interrupt()) {
1577 printk(KERN_DEBUG
"%s: driver bug - prism2_hw_reset() called "
1578 "in interrupt context\n", dev
->name
);
1582 if (local
->hw_downloading
)
1585 if (local
->hw_resetting
) {
1586 printk(KERN_WARNING
"%s: %s: already resetting card - "
1587 "ignoring reset request\n", dev_info
, dev
->name
);
1591 local
->hw_reset_tries
++;
1592 if (local
->hw_reset_tries
> 10) {
1593 printk(KERN_WARNING
"%s: too many reset tries, skipping\n",
1598 printk(KERN_WARNING
"%s: %s: resetting card\n", dev_info
, dev
->name
);
1599 hfa384x_disable_interrupts(dev
);
1600 local
->hw_resetting
= 1;
1601 if (local
->func
->cor_sreset
) {
1602 /* Host system seems to hang in some cases with high traffic
1603 * load or shared interrupts during COR sreset. Disable shared
1604 * interrupts during reset to avoid these crashes. COS sreset
1605 * takes quite a long time, so it is unfortunate that this
1606 * seems to be needed. Anyway, I do not know of any better way
1607 * of avoiding the crash. */
1608 disable_irq(dev
->irq
);
1609 local
->func
->cor_sreset(local
);
1610 enable_irq(dev
->irq
);
1612 prism2_hw_shutdown(dev
, 1);
1613 prism2_hw_config(dev
, 0);
1614 local
->hw_resetting
= 0;
1616 #ifdef PRISM2_DOWNLOAD_SUPPORT
1617 if (local
->dl_pri
) {
1618 printk(KERN_DEBUG
"%s: persistent download of primary "
1619 "firmware\n", dev
->name
);
1620 if (prism2_download_genesis(local
, local
->dl_pri
) < 0)
1621 printk(KERN_WARNING
"%s: download (PRI) failed\n",
1625 if (local
->dl_sec
) {
1626 printk(KERN_DEBUG
"%s: persistent download of secondary "
1627 "firmware\n", dev
->name
);
1628 if (prism2_download_volatile(local
, local
->dl_sec
) < 0)
1629 printk(KERN_WARNING
"%s: download (SEC) failed\n",
1632 #endif /* PRISM2_DOWNLOAD_SUPPORT */
1634 /* TODO: restore beacon TIM bits for STAs that have buffered frames */
1638 static void prism2_schedule_reset(local_info_t
*local
)
1640 schedule_work(&local
->reset_queue
);
1644 /* Called only as scheduled task after noticing card timeout in interrupt
1646 static void handle_reset_queue(void *data
)
1648 local_info_t
*local
= (local_info_t
*) data
;
1650 printk(KERN_DEBUG
"%s: scheduled card reset\n", local
->dev
->name
);
1651 prism2_hw_reset(local
->dev
);
1653 if (netif_queue_stopped(local
->dev
)) {
1656 for (i
= 0; i
< PRISM2_TXFID_COUNT
; i
++)
1657 if (local
->intransmitfid
[i
] == PRISM2_TXFID_EMPTY
) {
1658 PDEBUG(DEBUG_EXTRA
, "prism2_tx_timeout: "
1660 netif_wake_queue(local
->dev
);
1667 static int prism2_get_txfid_idx(local_info_t
*local
)
1670 unsigned long flags
;
1672 spin_lock_irqsave(&local
->txfidlock
, flags
);
1673 end
= idx
= local
->next_txfid
;
1675 if (local
->intransmitfid
[idx
] == PRISM2_TXFID_EMPTY
) {
1676 local
->intransmitfid
[idx
] = PRISM2_TXFID_RESERVED
;
1677 spin_unlock_irqrestore(&local
->txfidlock
, flags
);
1681 if (idx
>= PRISM2_TXFID_COUNT
)
1683 } while (idx
!= end
);
1684 spin_unlock_irqrestore(&local
->txfidlock
, flags
);
1686 PDEBUG(DEBUG_EXTRA2
, "prism2_get_txfid_idx: no room in txfid buf: "
1687 "packet dropped\n");
1688 local
->stats
.tx_dropped
++;
1694 /* Called only from hardware IRQ */
1695 static void prism2_transmit_cb(struct net_device
*dev
, long context
,
1698 struct hostap_interface
*iface
;
1699 local_info_t
*local
;
1700 int idx
= (int) context
;
1702 iface
= netdev_priv(dev
);
1703 local
= iface
->local
;
1706 printk(KERN_DEBUG
"%s: prism2_transmit_cb - res=0x%02x\n",
1711 if (idx
< 0 || idx
>= PRISM2_TXFID_COUNT
) {
1712 printk(KERN_DEBUG
"%s: prism2_transmit_cb called with invalid "
1713 "idx=%d\n", dev
->name
, idx
);
1717 if (!test_and_clear_bit(HOSTAP_BITS_TRANSMIT
, &local
->bits
)) {
1718 printk(KERN_DEBUG
"%s: driver bug: prism2_transmit_cb called "
1719 "with no pending transmit\n", dev
->name
);
1722 if (netif_queue_stopped(dev
)) {
1723 /* ready for next TX, so wake up queue that was stopped in
1724 * prism2_transmit() */
1725 netif_wake_queue(dev
);
1728 spin_lock(&local
->txfidlock
);
1730 /* With reclaim, Resp0 contains new txfid for transmit; the old txfid
1731 * will be automatically allocated for the next TX frame */
1732 local
->intransmitfid
[idx
] = resp0
;
1734 PDEBUG(DEBUG_FID
, "%s: prism2_transmit_cb: txfid[%d]=0x%04x, "
1735 "resp0=0x%04x, transmit_txfid=0x%04x\n",
1736 dev
->name
, idx
, local
->txfid
[idx
],
1737 resp0
, local
->intransmitfid
[local
->next_txfid
]);
1740 if (idx
>= PRISM2_TXFID_COUNT
)
1742 local
->next_txfid
= idx
;
1744 /* check if all TX buffers are occupied */
1746 if (local
->intransmitfid
[idx
] == PRISM2_TXFID_EMPTY
) {
1747 spin_unlock(&local
->txfidlock
);
1751 if (idx
>= PRISM2_TXFID_COUNT
)
1753 } while (idx
!= local
->next_txfid
);
1754 spin_unlock(&local
->txfidlock
);
1756 /* no empty TX buffers, stop queue */
1757 netif_stop_queue(dev
);
1761 /* Called only from software IRQ if PCI bus master is not used (with bus master
1762 * this can be called both from software and hardware IRQ) */
1763 static int prism2_transmit(struct net_device
*dev
, int idx
)
1765 struct hostap_interface
*iface
;
1766 local_info_t
*local
;
1769 iface
= netdev_priv(dev
);
1770 local
= iface
->local
;
1772 /* The driver tries to stop netif queue so that there would not be
1773 * more than one attempt to transmit frames going on; check that this
1774 * is really the case */
1776 if (test_and_set_bit(HOSTAP_BITS_TRANSMIT
, &local
->bits
)) {
1777 printk(KERN_DEBUG
"%s: driver bug - prism2_transmit() called "
1778 "when previous TX was pending\n", dev
->name
);
1782 /* stop the queue for the time that transmit is pending */
1783 netif_stop_queue(dev
);
1785 /* transmit packet */
1786 res
= hfa384x_cmd_callback(
1788 HFA384X_CMDCODE_TRANSMIT
| HFA384X_CMD_TX_RECLAIM
,
1790 prism2_transmit_cb
, (long) idx
);
1793 struct net_device_stats
*stats
;
1794 printk(KERN_DEBUG
"%s: prism2_transmit: CMDCODE_TRANSMIT "
1795 "failed (res=%d)\n", dev
->name
, res
);
1796 stats
= hostap_get_stats(dev
);
1797 stats
->tx_dropped
++;
1798 netif_wake_queue(dev
);
1801 dev
->trans_start
= jiffies
;
1803 /* Since we did not wait for command completion, the card continues
1804 * to process on the background and we will finish handling when
1805 * command completion event is handled (prism2_cmd_ev() function) */
1811 /* Send IEEE 802.11 frame (convert the header into Prism2 TX descriptor and
1812 * send the payload with this descriptor) */
1813 /* Called only from software IRQ */
1814 static int prism2_tx_80211(struct sk_buff
*skb
, struct net_device
*dev
)
1816 struct hostap_interface
*iface
;
1817 local_info_t
*local
;
1818 struct hfa384x_tx_frame txdesc
;
1819 struct hostap_skb_tx_data
*meta
;
1820 int hdr_len
, data_len
, idx
, res
, ret
= -1;
1823 iface
= netdev_priv(dev
);
1824 local
= iface
->local
;
1826 meta
= (struct hostap_skb_tx_data
*) skb
->cb
;
1828 prism2_callback(local
, PRISM2_CALLBACK_TX_START
);
1830 if ((local
->func
->card_present
&& !local
->func
->card_present(local
)) ||
1831 !local
->hw_ready
|| local
->hw_downloading
|| local
->pri_only
) {
1832 if (net_ratelimit()) {
1833 printk(KERN_DEBUG
"%s: prism2_tx_80211: hw not ready -"
1834 " skipping\n", dev
->name
);
1839 memset(&txdesc
, 0, sizeof(txdesc
));
1841 /* skb->data starts with txdesc->frame_control */
1843 memcpy(&txdesc
.frame_control
, skb
->data
, hdr_len
);
1844 fc
= le16_to_cpu(txdesc
.frame_control
);
1845 if (WLAN_FC_GET_TYPE(fc
) == IEEE80211_FTYPE_DATA
&&
1846 (fc
& IEEE80211_FCTL_FROMDS
) && (fc
& IEEE80211_FCTL_TODS
) &&
1849 memcpy(txdesc
.addr4
, skb
->data
+ hdr_len
, ETH_ALEN
);
1850 hdr_len
+= ETH_ALEN
;
1853 tx_control
= local
->tx_control
;
1854 if (meta
->tx_cb_idx
) {
1855 tx_control
|= HFA384X_TX_CTRL_TX_OK
;
1856 txdesc
.sw_support
= cpu_to_le16(meta
->tx_cb_idx
);
1858 txdesc
.tx_control
= cpu_to_le16(tx_control
);
1859 txdesc
.tx_rate
= meta
->rate
;
1861 data_len
= skb
->len
- hdr_len
;
1862 txdesc
.data_len
= cpu_to_le16(data_len
);
1863 txdesc
.len
= cpu_to_be16(data_len
);
1865 idx
= prism2_get_txfid_idx(local
);
1869 if (local
->frame_dump
& PRISM2_DUMP_TX_HDR
)
1870 hostap_dump_tx_header(dev
->name
, &txdesc
);
1872 spin_lock(&local
->baplock
);
1873 res
= hfa384x_setup_bap(dev
, BAP0
, local
->txfid
[idx
], 0);
1876 res
= hfa384x_to_bap(dev
, BAP0
, &txdesc
, sizeof(txdesc
));
1878 res
= hfa384x_to_bap(dev
, BAP0
, skb
->data
+ hdr_len
,
1879 skb
->len
- hdr_len
);
1880 spin_unlock(&local
->baplock
);
1883 res
= prism2_transmit(dev
, idx
);
1885 printk(KERN_DEBUG
"%s: prism2_tx_80211 - to BAP0 failed\n",
1887 local
->intransmitfid
[idx
] = PRISM2_TXFID_EMPTY
;
1888 schedule_work(&local
->reset_queue
);
1895 prism2_callback(local
, PRISM2_CALLBACK_TX_END
);
1900 /* Some SMP systems have reported number of odd errors with hostap_pci. fid
1901 * register has changed values between consecutive reads for an unknown reason.
1902 * This should really not happen, so more debugging is needed. This test
1903 * version is a big slower, but it will detect most of such register changes
1904 * and will try to get the correct fid eventually. */
1905 #define EXTRA_FID_READ_TESTS
1907 static inline u16
prism2_read_fid_reg(struct net_device
*dev
, u16 reg
)
1909 #ifdef EXTRA_FID_READ_TESTS
1910 u16 val
, val2
, val3
;
1913 for (i
= 0; i
< 10; i
++) {
1914 val
= HFA384X_INW(reg
);
1915 val2
= HFA384X_INW(reg
);
1916 val3
= HFA384X_INW(reg
);
1918 if (val
== val2
&& val
== val3
)
1921 printk(KERN_DEBUG
"%s: detected fid change (try=%d, reg=%04x):"
1922 " %04x %04x %04x\n",
1923 dev
->name
, i
, reg
, val
, val2
, val3
);
1924 if ((val
== val2
|| val
== val3
) && val
!= 0)
1926 if (val2
== val3
&& val2
!= 0)
1929 printk(KERN_WARNING
"%s: Uhhuh.. could not read good fid from reg "
1930 "%04x (%04x %04x %04x)\n", dev
->name
, reg
, val
, val2
, val3
);
1932 #else /* EXTRA_FID_READ_TESTS */
1933 return HFA384X_INW(reg
);
1934 #endif /* EXTRA_FID_READ_TESTS */
1938 /* Called only as a tasklet (software IRQ) */
1939 static void prism2_rx(local_info_t
*local
)
1941 struct net_device
*dev
= local
->dev
;
1942 int res
, rx_pending
= 0;
1943 u16 len
, hdr_len
, rxfid
, status
, macport
;
1944 struct net_device_stats
*stats
;
1945 struct hfa384x_rx_frame rxdesc
;
1946 struct sk_buff
*skb
= NULL
;
1948 prism2_callback(local
, PRISM2_CALLBACK_RX_START
);
1949 stats
= hostap_get_stats(dev
);
1951 rxfid
= prism2_read_fid_reg(dev
, HFA384X_RXFID_OFF
);
1952 #ifndef final_version
1954 rxfid
= HFA384X_INW(HFA384X_RXFID_OFF
);
1955 printk(KERN_DEBUG
"prism2_rx: rxfid=0 (next 0x%04x)\n",
1958 schedule_work(&local
->reset_queue
);
1961 /* try to continue with the new rxfid value */
1965 spin_lock(&local
->baplock
);
1966 res
= hfa384x_setup_bap(dev
, BAP0
, rxfid
, 0);
1968 res
= hfa384x_from_bap(dev
, BAP0
, &rxdesc
, sizeof(rxdesc
));
1971 spin_unlock(&local
->baplock
);
1972 printk(KERN_DEBUG
"%s: copy from BAP0 failed %d\n", dev
->name
,
1974 if (res
== -ETIMEDOUT
) {
1975 schedule_work(&local
->reset_queue
);
1980 len
= le16_to_cpu(rxdesc
.data_len
);
1981 hdr_len
= sizeof(rxdesc
);
1982 status
= le16_to_cpu(rxdesc
.status
);
1983 macport
= (status
>> 8) & 0x07;
1985 /* Drop frames with too large reported payload length. Monitor mode
1986 * seems to sometimes pass frames (e.g., ctrl::ack) with signed and
1987 * negative value, so allow also values 65522 .. 65534 (-14 .. -2) for
1989 if (len
> PRISM2_DATA_MAXLEN
+ 8 /* WEP */) {
1990 if (macport
== 7 && local
->iw_mode
== IW_MODE_MONITOR
) {
1991 if (len
>= (u16
) -14) {
1992 hdr_len
-= 65535 - len
;
1997 spin_unlock(&local
->baplock
);
1998 printk(KERN_DEBUG
"%s: Received frame with invalid "
1999 "length 0x%04x\n", dev
->name
, len
);
2000 hostap_dump_rx_header(dev
->name
, &rxdesc
);
2005 skb
= dev_alloc_skb(len
+ hdr_len
);
2007 spin_unlock(&local
->baplock
);
2008 printk(KERN_DEBUG
"%s: RX failed to allocate skb\n",
2013 memcpy(skb_put(skb
, hdr_len
), &rxdesc
, hdr_len
);
2016 res
= hfa384x_from_bap(dev
, BAP0
, skb_put(skb
, len
), len
);
2017 spin_unlock(&local
->baplock
);
2019 printk(KERN_DEBUG
"%s: RX failed to read "
2020 "frame data\n", dev
->name
);
2024 skb_queue_tail(&local
->rx_list
, skb
);
2025 tasklet_schedule(&local
->rx_tasklet
);
2028 prism2_callback(local
, PRISM2_CALLBACK_RX_END
);
2030 HFA384X_OUTW(HFA384X_EV_RX
, HFA384X_EVACK_OFF
);
2036 stats
->rx_dropped
++;
2043 /* Called only as a tasklet (software IRQ) */
2044 static void hostap_rx_skb(local_info_t
*local
, struct sk_buff
*skb
)
2046 struct hfa384x_rx_frame
*rxdesc
;
2047 struct net_device
*dev
= skb
->dev
;
2048 struct hostap_80211_rx_status stats
;
2049 int hdrlen
, rx_hdrlen
;
2051 rx_hdrlen
= sizeof(*rxdesc
);
2052 if (skb
->len
< sizeof(*rxdesc
)) {
2053 /* Allow monitor mode to receive shorter frames */
2054 if (local
->iw_mode
== IW_MODE_MONITOR
&&
2055 skb
->len
>= sizeof(*rxdesc
) - 30) {
2056 rx_hdrlen
= skb
->len
;
2063 rxdesc
= (struct hfa384x_rx_frame
*) skb
->data
;
2065 if (local
->frame_dump
& PRISM2_DUMP_RX_HDR
&&
2066 skb
->len
>= sizeof(*rxdesc
))
2067 hostap_dump_rx_header(dev
->name
, rxdesc
);
2069 if (le16_to_cpu(rxdesc
->status
) & HFA384X_RX_STATUS_FCSERR
&&
2070 (!local
->monitor_allow_fcserr
||
2071 local
->iw_mode
!= IW_MODE_MONITOR
))
2074 if (skb
->len
> PRISM2_DATA_MAXLEN
) {
2075 printk(KERN_DEBUG
"%s: RX: len(%d) > MAX(%d)\n",
2076 dev
->name
, skb
->len
, PRISM2_DATA_MAXLEN
);
2080 stats
.mac_time
= le32_to_cpu(rxdesc
->time
);
2081 stats
.signal
= rxdesc
->signal
- local
->rssi_to_dBm
;
2082 stats
.noise
= rxdesc
->silence
- local
->rssi_to_dBm
;
2083 stats
.rate
= rxdesc
->rate
;
2085 /* Convert Prism2 RX structure into IEEE 802.11 header */
2086 hdrlen
= hostap_80211_get_hdrlen(le16_to_cpu(rxdesc
->frame_control
));
2087 if (hdrlen
> rx_hdrlen
)
2090 memmove(skb_pull(skb
, rx_hdrlen
- hdrlen
),
2091 &rxdesc
->frame_control
, hdrlen
);
2093 hostap_80211_rx(dev
, skb
, &stats
);
2101 /* Called only as a tasklet (software IRQ) */
2102 static void hostap_rx_tasklet(unsigned long data
)
2104 local_info_t
*local
= (local_info_t
*) data
;
2105 struct sk_buff
*skb
;
2107 while ((skb
= skb_dequeue(&local
->rx_list
)) != NULL
)
2108 hostap_rx_skb(local
, skb
);
2112 /* Called only from hardware IRQ */
2113 static void prism2_alloc_ev(struct net_device
*dev
)
2115 struct hostap_interface
*iface
;
2116 local_info_t
*local
;
2120 iface
= netdev_priv(dev
);
2121 local
= iface
->local
;
2123 fid
= prism2_read_fid_reg(dev
, HFA384X_ALLOCFID_OFF
);
2125 PDEBUG(DEBUG_FID
, "FID: interrupt: ALLOC - fid=0x%04x\n", fid
);
2127 spin_lock(&local
->txfidlock
);
2128 idx
= local
->next_alloc
;
2131 if (local
->txfid
[idx
] == fid
) {
2132 PDEBUG(DEBUG_FID
, "FID: found matching txfid[%d]\n",
2135 #ifndef final_version
2136 if (local
->intransmitfid
[idx
] == PRISM2_TXFID_EMPTY
)
2137 printk("Already released txfid found at idx "
2139 if (local
->intransmitfid
[idx
] == PRISM2_TXFID_RESERVED
)
2140 printk("Already reserved txfid found at idx "
2143 local
->intransmitfid
[idx
] = PRISM2_TXFID_EMPTY
;
2145 local
->next_alloc
= idx
>= PRISM2_TXFID_COUNT
? 0 :
2148 if (!test_bit(HOSTAP_BITS_TRANSMIT
, &local
->bits
) &&
2149 netif_queue_stopped(dev
))
2150 netif_wake_queue(dev
);
2152 spin_unlock(&local
->txfidlock
);
2157 if (idx
>= PRISM2_TXFID_COUNT
)
2159 } while (idx
!= local
->next_alloc
);
2161 printk(KERN_WARNING
"%s: could not find matching txfid (0x%04x, new "
2162 "read 0x%04x) for alloc event\n", dev
->name
, fid
,
2163 HFA384X_INW(HFA384X_ALLOCFID_OFF
));
2164 printk(KERN_DEBUG
"TXFIDs:");
2165 for (idx
= 0; idx
< PRISM2_TXFID_COUNT
; idx
++)
2166 printk(" %04x[%04x]", local
->txfid
[idx
],
2167 local
->intransmitfid
[idx
]);
2169 spin_unlock(&local
->txfidlock
);
2171 /* FIX: should probably schedule reset; reference to one txfid was lost
2172 * completely.. Bad things will happen if we run out of txfids
2173 * Actually, this will cause netdev watchdog to notice TX timeout and
2174 * then card reset after all txfids have been leaked. */
2178 /* Called only as a tasklet (software IRQ) */
2179 static void hostap_tx_callback(local_info_t
*local
,
2180 struct hfa384x_tx_frame
*txdesc
, int ok
,
2183 u16 sw_support
, hdrlen
, len
;
2184 struct sk_buff
*skb
;
2185 struct hostap_tx_callback_info
*cb
;
2187 /* Make sure that frame was from us. */
2188 if (memcmp(txdesc
->addr2
, local
->dev
->dev_addr
, ETH_ALEN
)) {
2189 printk(KERN_DEBUG
"%s: TX callback - foreign frame\n",
2194 sw_support
= le16_to_cpu(txdesc
->sw_support
);
2196 spin_lock(&local
->lock
);
2197 cb
= local
->tx_callback
;
2198 while (cb
!= NULL
&& cb
->idx
!= sw_support
)
2200 spin_unlock(&local
->lock
);
2203 printk(KERN_DEBUG
"%s: could not find TX callback (idx %d)\n",
2204 local
->dev
->name
, sw_support
);
2208 hdrlen
= hostap_80211_get_hdrlen(le16_to_cpu(txdesc
->frame_control
));
2209 len
= le16_to_cpu(txdesc
->data_len
);
2210 skb
= dev_alloc_skb(hdrlen
+ len
);
2212 printk(KERN_DEBUG
"%s: hostap_tx_callback failed to allocate "
2213 "skb\n", local
->dev
->name
);
2217 memcpy(skb_put(skb
, hdrlen
), (void *) &txdesc
->frame_control
, hdrlen
);
2219 memcpy(skb_put(skb
, len
), payload
, len
);
2221 skb
->dev
= local
->dev
;
2222 skb
->mac
.raw
= skb
->data
;
2224 cb
->func(skb
, ok
, cb
->data
);
2228 /* Called only as a tasklet (software IRQ) */
2229 static int hostap_tx_compl_read(local_info_t
*local
, int error
,
2230 struct hfa384x_tx_frame
*txdesc
,
2235 struct net_device
*dev
= local
->dev
;
2237 fid
= prism2_read_fid_reg(dev
, HFA384X_TXCOMPLFID_OFF
);
2239 PDEBUG(DEBUG_FID
, "interrupt: TX (err=%d) - fid=0x%04x\n", fid
, error
);
2241 spin_lock(&local
->baplock
);
2242 res
= hfa384x_setup_bap(dev
, BAP0
, fid
, 0);
2244 res
= hfa384x_from_bap(dev
, BAP0
, txdesc
, sizeof(*txdesc
));
2246 PDEBUG(DEBUG_EXTRA
, "%s: TX (err=%d) - fid=0x%04x - could not "
2247 "read txdesc\n", dev
->name
, error
, fid
);
2248 if (res
== -ETIMEDOUT
) {
2249 schedule_work(&local
->reset_queue
);
2254 if (txdesc
->sw_support
) {
2255 len
= le16_to_cpu(txdesc
->data_len
);
2256 if (len
< PRISM2_DATA_MAXLEN
) {
2257 *payload
= (char *) kmalloc(len
, GFP_ATOMIC
);
2258 if (*payload
== NULL
||
2259 hfa384x_from_bap(dev
, BAP0
, *payload
, len
)) {
2260 PDEBUG(DEBUG_EXTRA
, "%s: could not read TX "
2261 "frame payload\n", dev
->name
);
2271 spin_unlock(&local
->baplock
);
2277 /* Called only as a tasklet (software IRQ) */
2278 static void prism2_tx_ev(local_info_t
*local
)
2280 struct net_device
*dev
= local
->dev
;
2281 char *payload
= NULL
;
2282 struct hfa384x_tx_frame txdesc
;
2284 if (hostap_tx_compl_read(local
, 0, &txdesc
, &payload
))
2287 if (local
->frame_dump
& PRISM2_DUMP_TX_HDR
) {
2288 PDEBUG(DEBUG_EXTRA
, "%s: TX - status=0x%04x "
2289 "retry_count=%d tx_rate=%d seq_ctrl=%d "
2291 dev
->name
, le16_to_cpu(txdesc
.status
),
2292 txdesc
.retry_count
, txdesc
.tx_rate
,
2293 le16_to_cpu(txdesc
.seq_ctrl
),
2294 le16_to_cpu(txdesc
.duration_id
));
2297 if (txdesc
.sw_support
)
2298 hostap_tx_callback(local
, &txdesc
, 1, payload
);
2302 HFA384X_OUTW(HFA384X_EV_TX
, HFA384X_EVACK_OFF
);
2306 /* Called only as a tasklet (software IRQ) */
2307 static void hostap_sta_tx_exc_tasklet(unsigned long data
)
2309 local_info_t
*local
= (local_info_t
*) data
;
2310 struct sk_buff
*skb
;
2312 while ((skb
= skb_dequeue(&local
->sta_tx_exc_list
)) != NULL
) {
2313 struct hfa384x_tx_frame
*txdesc
=
2314 (struct hfa384x_tx_frame
*) skb
->data
;
2316 if (skb
->len
>= sizeof(*txdesc
)) {
2317 /* Convert Prism2 RX structure into IEEE 802.11 header
2319 u16 fc
= le16_to_cpu(txdesc
->frame_control
);
2320 int hdrlen
= hostap_80211_get_hdrlen(fc
);
2321 memmove(skb_pull(skb
, sizeof(*txdesc
) - hdrlen
),
2322 &txdesc
->frame_control
, hdrlen
);
2324 hostap_handle_sta_tx_exc(local
, skb
);
2331 /* Called only as a tasklet (software IRQ) */
2332 static void prism2_txexc(local_info_t
*local
)
2334 struct net_device
*dev
= local
->dev
;
2337 char *payload
= NULL
;
2338 struct hfa384x_tx_frame txdesc
;
2340 show_dump
= local
->frame_dump
& PRISM2_DUMP_TXEXC_HDR
;
2341 local
->stats
.tx_errors
++;
2343 res
= hostap_tx_compl_read(local
, 1, &txdesc
, &payload
);
2344 HFA384X_OUTW(HFA384X_EV_TXEXC
, HFA384X_EVACK_OFF
);
2348 status
= le16_to_cpu(txdesc
.status
);
2350 /* We produce a TXDROP event only for retry or lifetime
2351 * exceeded, because that's the only status that really mean
2352 * that this particular node went away.
2353 * Other errors means that *we* screwed up. - Jean II */
2354 if (status
& (HFA384X_TX_STATUS_RETRYERR
| HFA384X_TX_STATUS_AGEDERR
))
2356 union iwreq_data wrqu
;
2358 /* Copy 802.11 dest address. */
2359 memcpy(wrqu
.addr
.sa_data
, txdesc
.addr1
, ETH_ALEN
);
2360 wrqu
.addr
.sa_family
= ARPHRD_ETHER
;
2361 wireless_send_event(dev
, IWEVTXDROP
, &wrqu
, NULL
);
2365 if (local
->iw_mode
== IW_MODE_MASTER
||
2366 local
->iw_mode
== IW_MODE_REPEAT
||
2367 local
->wds_type
& HOSTAP_WDS_AP_CLIENT
) {
2368 struct sk_buff
*skb
;
2369 skb
= dev_alloc_skb(sizeof(txdesc
));
2371 memcpy(skb_put(skb
, sizeof(txdesc
)), &txdesc
,
2373 skb_queue_tail(&local
->sta_tx_exc_list
, skb
);
2374 tasklet_schedule(&local
->sta_tx_exc_tasklet
);
2378 if (txdesc
.sw_support
)
2379 hostap_tx_callback(local
, &txdesc
, 0, payload
);
2385 PDEBUG(DEBUG_EXTRA
, "%s: TXEXC - status=0x%04x (%s%s%s%s)"
2386 " tx_control=%04x\n",
2388 status
& HFA384X_TX_STATUS_RETRYERR
? "[RetryErr]" : "",
2389 status
& HFA384X_TX_STATUS_AGEDERR
? "[AgedErr]" : "",
2390 status
& HFA384X_TX_STATUS_DISCON
? "[Discon]" : "",
2391 status
& HFA384X_TX_STATUS_FORMERR
? "[FormErr]" : "",
2392 le16_to_cpu(txdesc
.tx_control
));
2394 fc
= le16_to_cpu(txdesc
.frame_control
);
2395 PDEBUG(DEBUG_EXTRA
, " retry_count=%d tx_rate=%d fc=0x%04x "
2396 "(%s%s%s::%d%s%s)\n",
2397 txdesc
.retry_count
, txdesc
.tx_rate
, fc
,
2398 WLAN_FC_GET_TYPE(fc
) == IEEE80211_FTYPE_MGMT
? "Mgmt" : "",
2399 WLAN_FC_GET_TYPE(fc
) == IEEE80211_FTYPE_CTL
? "Ctrl" : "",
2400 WLAN_FC_GET_TYPE(fc
) == IEEE80211_FTYPE_DATA
? "Data" : "",
2401 WLAN_FC_GET_STYPE(fc
) >> 4,
2402 fc
& IEEE80211_FCTL_TODS
? " ToDS" : "",
2403 fc
& IEEE80211_FCTL_FROMDS
? " FromDS" : "");
2404 PDEBUG(DEBUG_EXTRA
, " A1=" MACSTR
" A2=" MACSTR
" A3="
2405 MACSTR
" A4=" MACSTR
"\n",
2406 MAC2STR(txdesc
.addr1
), MAC2STR(txdesc
.addr2
),
2407 MAC2STR(txdesc
.addr3
), MAC2STR(txdesc
.addr4
));
2411 /* Called only as a tasklet (software IRQ) */
2412 static void hostap_info_tasklet(unsigned long data
)
2414 local_info_t
*local
= (local_info_t
*) data
;
2415 struct sk_buff
*skb
;
2417 while ((skb
= skb_dequeue(&local
->info_list
)) != NULL
) {
2418 hostap_info_process(local
, skb
);
2424 /* Called only as a tasklet (software IRQ) */
2425 static void prism2_info(local_info_t
*local
)
2427 struct net_device
*dev
= local
->dev
;
2430 struct hfa384x_info_frame info
;
2431 struct sk_buff
*skb
;
2433 fid
= HFA384X_INW(HFA384X_INFOFID_OFF
);
2435 spin_lock(&local
->baplock
);
2436 res
= hfa384x_setup_bap(dev
, BAP0
, fid
, 0);
2438 res
= hfa384x_from_bap(dev
, BAP0
, &info
, sizeof(info
));
2440 spin_unlock(&local
->baplock
);
2441 printk(KERN_DEBUG
"Could not get info frame (fid=0x%04x)\n",
2443 if (res
== -ETIMEDOUT
) {
2444 schedule_work(&local
->reset_queue
);
2449 le16_to_cpus(&info
.len
);
2450 le16_to_cpus(&info
.type
);
2451 left
= (info
.len
- 1) * 2;
2453 if (info
.len
& 0x8000 || info
.len
== 0 || left
> 2060) {
2454 /* data register seems to give 0x8000 in some error cases even
2455 * though busy bit is not set in offset register;
2456 * in addition, length must be at least 1 due to type field */
2457 spin_unlock(&local
->baplock
);
2458 printk(KERN_DEBUG
"%s: Received info frame with invalid "
2459 "length 0x%04x (type 0x%04x)\n", dev
->name
, info
.len
,
2464 skb
= dev_alloc_skb(sizeof(info
) + left
);
2466 spin_unlock(&local
->baplock
);
2467 printk(KERN_DEBUG
"%s: Could not allocate skb for info "
2468 "frame\n", dev
->name
);
2472 memcpy(skb_put(skb
, sizeof(info
)), &info
, sizeof(info
));
2473 if (left
> 0 && hfa384x_from_bap(dev
, BAP0
, skb_put(skb
, left
), left
))
2475 spin_unlock(&local
->baplock
);
2476 printk(KERN_WARNING
"%s: Info frame read failed (fid=0x%04x, "
2477 "len=0x%04x, type=0x%04x\n",
2478 dev
->name
, fid
, info
.len
, info
.type
);
2482 spin_unlock(&local
->baplock
);
2484 skb_queue_tail(&local
->info_list
, skb
);
2485 tasklet_schedule(&local
->info_tasklet
);
2488 HFA384X_OUTW(HFA384X_EV_INFO
, HFA384X_EVACK_OFF
);
2492 /* Called only as a tasklet (software IRQ) */
2493 static void hostap_bap_tasklet(unsigned long data
)
2495 local_info_t
*local
= (local_info_t
*) data
;
2496 struct net_device
*dev
= local
->dev
;
2500 if (local
->func
->card_present
&& !local
->func
->card_present(local
))
2503 set_bit(HOSTAP_BITS_BAP_TASKLET
, &local
->bits
);
2505 /* Process all pending BAP events without generating new interrupts
2507 while (frames
-- > 0) {
2508 ev
= HFA384X_INW(HFA384X_EVSTAT_OFF
);
2509 if (ev
== 0xffff || !(ev
& HFA384X_BAP0_EVENTS
))
2511 if (ev
& HFA384X_EV_RX
)
2513 if (ev
& HFA384X_EV_INFO
)
2515 if (ev
& HFA384X_EV_TX
)
2516 prism2_tx_ev(local
);
2517 if (ev
& HFA384X_EV_TXEXC
)
2518 prism2_txexc(local
);
2521 set_bit(HOSTAP_BITS_BAP_TASKLET2
, &local
->bits
);
2522 clear_bit(HOSTAP_BITS_BAP_TASKLET
, &local
->bits
);
2524 /* Enable interrupts for new BAP events */
2525 hfa384x_events_all(dev
);
2526 clear_bit(HOSTAP_BITS_BAP_TASKLET2
, &local
->bits
);
2530 /* Called only from hardware IRQ */
2531 static void prism2_infdrop(struct net_device
*dev
)
2533 static unsigned long last_inquire
= 0;
2535 PDEBUG(DEBUG_EXTRA
, "%s: INFDROP event\n", dev
->name
);
2537 /* some firmware versions seem to get stuck with
2538 * full CommTallies in high traffic load cases; every
2539 * packet will then cause INFDROP event and CommTallies
2540 * info frame will not be sent automatically. Try to
2541 * get out of this state by inquiring CommTallies. */
2542 if (!last_inquire
|| time_after(jiffies
, last_inquire
+ HZ
)) {
2543 hfa384x_cmd_callback(dev
, HFA384X_CMDCODE_INQUIRE
,
2544 HFA384X_INFO_COMMTALLIES
, NULL
, 0);
2545 last_inquire
= jiffies
;
2550 /* Called only from hardware IRQ */
2551 static void prism2_ev_tick(struct net_device
*dev
)
2553 struct hostap_interface
*iface
;
2554 local_info_t
*local
;
2556 static int prev_stuck
= 0;
2558 iface
= netdev_priv(dev
);
2559 local
= iface
->local
;
2561 if (time_after(jiffies
, local
->last_tick_timer
+ 5 * HZ
) &&
2562 local
->last_tick_timer
) {
2563 evstat
= HFA384X_INW(HFA384X_EVSTAT_OFF
);
2564 inten
= HFA384X_INW(HFA384X_INTEN_OFF
);
2566 printk(KERN_INFO
"%s: SW TICK stuck? "
2567 "bits=0x%lx EvStat=%04x IntEn=%04x\n",
2568 dev
->name
, local
->bits
, evstat
, inten
);
2570 local
->sw_tick_stuck
++;
2571 if ((evstat
& HFA384X_BAP0_EVENTS
) &&
2572 (inten
& HFA384X_BAP0_EVENTS
)) {
2573 printk(KERN_INFO
"%s: trying to recover from IRQ "
2574 "hang\n", dev
->name
);
2575 hfa384x_events_no_bap0(dev
);
2583 /* Called only from hardware IRQ */
2584 static inline void prism2_check_magic(local_info_t
*local
)
2586 /* at least PCI Prism2.5 with bus mastering seems to sometimes
2587 * return 0x0000 in SWSUPPORT0 for unknown reason, but re-reading the
2588 * register once or twice seems to get the correct value.. PCI cards
2589 * cannot anyway be removed during normal operation, so there is not
2590 * really any need for this verification with them. */
2593 #ifndef final_version
2594 static unsigned long last_magic_err
= 0;
2595 struct net_device
*dev
= local
->dev
;
2597 if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF
) != HFA384X_MAGIC
) {
2598 if (!local
->hw_ready
)
2600 HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF
);
2601 if (time_after(jiffies
, last_magic_err
+ 10 * HZ
)) {
2602 printk("%s: Interrupt, but SWSUPPORT0 does not match: "
2603 "%04X != %04X - card removed?\n", dev
->name
,
2604 HFA384X_INW(HFA384X_SWSUPPORT0_OFF
),
2606 last_magic_err
= jiffies
;
2607 } else if (net_ratelimit()) {
2608 printk(KERN_DEBUG
"%s: interrupt - SWSUPPORT0=%04x "
2609 "MAGIC=%04x\n", dev
->name
,
2610 HFA384X_INW(HFA384X_SWSUPPORT0_OFF
),
2613 if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF
) != 0xffff)
2614 schedule_work(&local
->reset_queue
);
2617 #endif /* final_version */
2618 #endif /* !PRISM2_PCI */
2622 /* Called only from hardware IRQ */
2623 static irqreturn_t
prism2_interrupt(int irq
, void *dev_id
, struct pt_regs
*regs
)
2625 struct net_device
*dev
= (struct net_device
*) dev_id
;
2626 struct hostap_interface
*iface
;
2627 local_info_t
*local
;
2631 iface
= netdev_priv(dev
);
2632 local
= iface
->local
;
2634 prism2_io_debug_add(dev
, PRISM2_IO_DEBUG_CMD_INTERRUPT
, 0, 0);
2636 if (local
->func
->card_present
&& !local
->func
->card_present(local
)) {
2637 if (net_ratelimit()) {
2638 printk(KERN_DEBUG
"%s: Interrupt, but dev not OK\n",
2644 prism2_check_magic(local
);
2647 ev
= HFA384X_INW(HFA384X_EVSTAT_OFF
);
2649 if (local
->shutdown
)
2651 HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF
);
2652 printk(KERN_DEBUG
"%s: prism2_interrupt: ev=0xffff\n",
2657 ev
&= HFA384X_INW(HFA384X_INTEN_OFF
);
2661 if (ev
& HFA384X_EV_CMD
) {
2665 /* Above events are needed even before hw is ready, but other
2666 * events should be skipped during initialization. This may
2667 * change for AllocEv if allocate_fid is implemented without
2669 if (!local
->hw_ready
|| local
->hw_resetting
||
2670 !local
->dev_enabled
) {
2671 ev
= HFA384X_INW(HFA384X_EVSTAT_OFF
);
2672 if (ev
& HFA384X_EV_CMD
)
2674 if ((ev
& HFA384X_EVENT_MASK
) == 0)
2676 if (local
->dev_enabled
&& (ev
& ~HFA384X_EV_TICK
) &&
2678 printk(KERN_DEBUG
"%s: prism2_interrupt: hw "
2679 "not ready; skipping events 0x%04x "
2680 "(IntEn=0x%04x)%s%s%s\n",
2682 HFA384X_INW(HFA384X_INTEN_OFF
),
2683 !local
->hw_ready
? " (!hw_ready)" : "",
2684 local
->hw_resetting
?
2685 " (hw_resetting)" : "",
2686 !local
->dev_enabled
?
2687 " (!dev_enabled)" : "");
2689 HFA384X_OUTW(ev
, HFA384X_EVACK_OFF
);
2693 if (ev
& HFA384X_EV_TICK
) {
2694 prism2_ev_tick(dev
);
2695 HFA384X_OUTW(HFA384X_EV_TICK
, HFA384X_EVACK_OFF
);
2698 if (ev
& HFA384X_EV_ALLOC
) {
2699 prism2_alloc_ev(dev
);
2700 HFA384X_OUTW(HFA384X_EV_ALLOC
, HFA384X_EVACK_OFF
);
2703 /* Reading data from the card is quite time consuming, so do it
2704 * in tasklets. TX, TXEXC, RX, and INFO events will be ACKed
2705 * and unmasked after needed data has been read completely. */
2706 if (ev
& HFA384X_BAP0_EVENTS
) {
2707 hfa384x_events_no_bap0(dev
);
2708 tasklet_schedule(&local
->bap_tasklet
);
2711 #ifndef final_version
2712 if (ev
& HFA384X_EV_WTERR
) {
2713 PDEBUG(DEBUG_EXTRA
, "%s: WTERR event\n", dev
->name
);
2714 HFA384X_OUTW(HFA384X_EV_WTERR
, HFA384X_EVACK_OFF
);
2716 #endif /* final_version */
2718 if (ev
& HFA384X_EV_INFDROP
) {
2719 prism2_infdrop(dev
);
2720 HFA384X_OUTW(HFA384X_EV_INFDROP
, HFA384X_EVACK_OFF
);
2725 if (events
>= PRISM2_MAX_INTERRUPT_EVENTS
) {
2726 PDEBUG(DEBUG_EXTRA
, "prism2_interrupt: >%d events "
2727 "(EvStat=0x%04x)\n",
2728 PRISM2_MAX_INTERRUPT_EVENTS
,
2729 HFA384X_INW(HFA384X_EVSTAT_OFF
));
2733 prism2_io_debug_add(dev
, PRISM2_IO_DEBUG_CMD_INTERRUPT
, 0, 1);
2734 return IRQ_RETVAL(events
);
2738 static void prism2_check_sta_fw_version(local_info_t
*local
)
2740 struct hfa384x_comp_ident comp
;
2741 int id
, variant
, major
, minor
;
2743 if (hfa384x_get_rid(local
->dev
, HFA384X_RID_STAID
,
2744 &comp
, sizeof(comp
), 1) < 0)
2748 id
= le16_to_cpu(comp
.id
);
2749 if (id
!= HFA384X_COMP_ID_STA
) {
2750 if (id
== HFA384X_COMP_ID_FW_AP
)
2755 major
= __le16_to_cpu(comp
.major
);
2756 minor
= __le16_to_cpu(comp
.minor
);
2757 variant
= __le16_to_cpu(comp
.variant
);
2758 local
->sta_fw_ver
= PRISM2_FW_VER(major
, minor
, variant
);
2760 /* Station firmware versions before 1.4.x seem to have a bug in
2761 * firmware-based WEP encryption when using Host AP mode, so use
2762 * host_encrypt as a default for them. Firmware version 1.4.9 is the
2763 * first one that has been seen to produce correct encryption, but the
2764 * bug might be fixed before that (although, at least 1.4.2 is broken).
2766 local
->fw_encrypt_ok
= local
->sta_fw_ver
>= PRISM2_FW_VER(1,4,9);
2768 if (local
->iw_mode
== IW_MODE_MASTER
&& !local
->host_encrypt
&&
2769 !local
->fw_encrypt_ok
) {
2770 printk(KERN_DEBUG
"%s: defaulting to host-based encryption as "
2771 "a workaround for firmware bug in Host AP mode WEP\n",
2773 local
->host_encrypt
= 1;
2776 /* IEEE 802.11 standard compliant WDS frames (4 addresses) were broken
2777 * in station firmware versions before 1.5.x. With these versions, the
2778 * driver uses a workaround with bogus frame format (4th address after
2779 * the payload). This is not compatible with other AP devices. Since
2780 * the firmware bug is fixed in the latest station firmware versions,
2781 * automatically enable standard compliant mode for cards using station
2782 * firmware version 1.5.0 or newer. */
2783 if (local
->sta_fw_ver
>= PRISM2_FW_VER(1,5,0))
2784 local
->wds_type
|= HOSTAP_WDS_STANDARD_FRAME
;
2786 printk(KERN_DEBUG
"%s: defaulting to bogus WDS frame as a "
2787 "workaround for firmware bug in Host AP mode WDS\n",
2791 hostap_check_sta_fw_version(local
->ap
, local
->sta_fw_ver
);
2795 static void prism2_crypt_deinit_entries(local_info_t
*local
, int force
)
2797 struct list_head
*ptr
, *n
;
2798 struct ieee80211_crypt_data
*entry
;
2800 for (ptr
= local
->crypt_deinit_list
.next
, n
= ptr
->next
;
2801 ptr
!= &local
->crypt_deinit_list
; ptr
= n
, n
= ptr
->next
) {
2802 entry
= list_entry(ptr
, struct ieee80211_crypt_data
, list
);
2804 if (atomic_read(&entry
->refcnt
) != 0 && !force
)
2810 entry
->ops
->deinit(entry
->priv
);
2816 static void prism2_crypt_deinit_handler(unsigned long data
)
2818 local_info_t
*local
= (local_info_t
*) data
;
2819 unsigned long flags
;
2821 spin_lock_irqsave(&local
->lock
, flags
);
2822 prism2_crypt_deinit_entries(local
, 0);
2823 if (!list_empty(&local
->crypt_deinit_list
)) {
2824 printk(KERN_DEBUG
"%s: entries remaining in delayed crypt "
2825 "deletion list\n", local
->dev
->name
);
2826 local
->crypt_deinit_timer
.expires
= jiffies
+ HZ
;
2827 add_timer(&local
->crypt_deinit_timer
);
2829 spin_unlock_irqrestore(&local
->lock
, flags
);
2834 static void hostap_passive_scan(unsigned long data
)
2836 local_info_t
*local
= (local_info_t
*) data
;
2837 struct net_device
*dev
= local
->dev
;
2840 if (local
->passive_scan_interval
<= 0)
2843 if (local
->passive_scan_state
== PASSIVE_SCAN_LISTEN
) {
2846 /* Even though host system does not really know when the WLAN
2847 * MAC is sending frames, try to avoid changing channels for
2848 * passive scanning when a host-generated frame is being
2850 if (test_bit(HOSTAP_BITS_TRANSMIT
, &local
->bits
)) {
2851 printk(KERN_DEBUG
"%s: passive scan detected pending "
2852 "TX - delaying\n", dev
->name
);
2853 local
->passive_scan_timer
.expires
= jiffies
+ HZ
/ 10;
2854 add_timer(&local
->passive_scan_timer
);
2859 local
->passive_scan_channel
++;
2860 if (local
->passive_scan_channel
> 14)
2861 local
->passive_scan_channel
= 1;
2863 } while (!(local
->channel_mask
&
2864 (1 << (local
->passive_scan_channel
- 1))) &&
2867 if (max_tries
== 0) {
2868 printk(KERN_INFO
"%s: no allowed passive scan channels"
2869 " found\n", dev
->name
);
2873 printk(KERN_DEBUG
"%s: passive scan channel %d\n",
2874 dev
->name
, local
->passive_scan_channel
);
2875 channel
= local
->passive_scan_channel
;
2876 local
->passive_scan_state
= PASSIVE_SCAN_WAIT
;
2877 local
->passive_scan_timer
.expires
= jiffies
+ HZ
/ 10;
2879 channel
= local
->channel
;
2880 local
->passive_scan_state
= PASSIVE_SCAN_LISTEN
;
2881 local
->passive_scan_timer
.expires
= jiffies
+
2882 local
->passive_scan_interval
* HZ
;
2885 if (hfa384x_cmd_callback(dev
, HFA384X_CMDCODE_TEST
|
2886 (HFA384X_TEST_CHANGE_CHANNEL
<< 8),
2888 printk(KERN_ERR
"%s: passive scan channel set %d "
2889 "failed\n", dev
->name
, channel
);
2891 add_timer(&local
->passive_scan_timer
);
2895 /* Called only as a scheduled task when communications quality values should
2897 static void handle_comms_qual_update(void *data
)
2899 local_info_t
*local
= data
;
2900 prism2_update_comms_qual(local
->dev
);
2904 /* Software watchdog - called as a timer. Hardware interrupt (Tick event) is
2905 * used to monitor that local->last_tick_timer is being updated. If not,
2906 * interrupt busy-loop is assumed and driver tries to recover by masking out
2908 static void hostap_tick_timer(unsigned long data
)
2910 static unsigned long last_inquire
= 0;
2911 local_info_t
*local
= (local_info_t
*) data
;
2912 local
->last_tick_timer
= jiffies
;
2914 /* Inquire CommTallies every 10 seconds to keep the statistics updated
2915 * more often during low load and when using 32-bit tallies. */
2916 if ((!last_inquire
|| time_after(jiffies
, last_inquire
+ 10 * HZ
)) &&
2917 !local
->hw_downloading
&& local
->hw_ready
&&
2918 !local
->hw_resetting
&& local
->dev_enabled
) {
2919 hfa384x_cmd_callback(local
->dev
, HFA384X_CMDCODE_INQUIRE
,
2920 HFA384X_INFO_COMMTALLIES
, NULL
, 0);
2921 last_inquire
= jiffies
;
2924 if ((local
->last_comms_qual_update
== 0 ||
2925 time_after(jiffies
, local
->last_comms_qual_update
+ 10 * HZ
)) &&
2926 (local
->iw_mode
== IW_MODE_INFRA
||
2927 local
->iw_mode
== IW_MODE_ADHOC
)) {
2928 schedule_work(&local
->comms_qual_update
);
2931 local
->tick_timer
.expires
= jiffies
+ 2 * HZ
;
2932 add_timer(&local
->tick_timer
);
2936 #ifndef PRISM2_NO_PROCFS_DEBUG
2937 static int prism2_registers_proc_read(char *page
, char **start
, off_t off
,
2938 int count
, int *eof
, void *data
)
2941 local_info_t
*local
= (local_info_t
*) data
;
2948 #define SHOW_REG(n) \
2949 p += sprintf(p, #n "=%04x\n", hfa384x_read_reg(local->dev, HFA384X_##n##_OFF))
2967 SHOW_REG(TXCOMPLFID
);
2968 SHOW_REG(SWSUPPORT0
);
2969 SHOW_REG(SWSUPPORT1
);
2970 SHOW_REG(SWSUPPORT2
);
2974 /* Do not read data registers, because they change the state of the
2975 * MAC (offset += 2) */
2976 /* SHOW_REG(DATA0); */
2977 /* SHOW_REG(DATA1); */
2979 SHOW_REG(AUXOFFSET
);
2980 /* SHOW_REG(AUXDATA); */
2984 SHOW_REG(PCI_M0_ADDRH
);
2985 SHOW_REG(PCI_M0_ADDRL
);
2986 SHOW_REG(PCI_M0_LEN
);
2987 SHOW_REG(PCI_M0_CTL
);
2988 SHOW_REG(PCI_STATUS
);
2989 SHOW_REG(PCI_M1_ADDRH
);
2990 SHOW_REG(PCI_M1_ADDRL
);
2991 SHOW_REG(PCI_M1_LEN
);
2992 SHOW_REG(PCI_M1_CTL
);
2993 #endif /* PRISM2_PCI */
2997 #endif /* PRISM2_NO_PROCFS_DEBUG */
3000 struct set_tim_data
{
3001 struct list_head list
;
3006 static int prism2_set_tim(struct net_device
*dev
, int aid
, int set
)
3008 struct list_head
*ptr
;
3009 struct set_tim_data
*new_entry
;
3010 struct hostap_interface
*iface
;
3011 local_info_t
*local
;
3013 iface
= netdev_priv(dev
);
3014 local
= iface
->local
;
3016 new_entry
= (struct set_tim_data
*)
3017 kmalloc(sizeof(*new_entry
), GFP_ATOMIC
);
3018 if (new_entry
== NULL
) {
3019 printk(KERN_DEBUG
"%s: prism2_set_tim: kmalloc failed\n",
3023 memset(new_entry
, 0, sizeof(*new_entry
));
3024 new_entry
->aid
= aid
;
3025 new_entry
->set
= set
;
3027 spin_lock_bh(&local
->set_tim_lock
);
3028 list_for_each(ptr
, &local
->set_tim_list
) {
3029 struct set_tim_data
*entry
=
3030 list_entry(ptr
, struct set_tim_data
, list
);
3031 if (entry
->aid
== aid
) {
3032 PDEBUG(DEBUG_PS2
, "%s: prism2_set_tim: aid=%d "
3034 local
->dev
->name
, aid
, entry
->set
, set
);
3042 list_add_tail(&new_entry
->list
, &local
->set_tim_list
);
3043 spin_unlock_bh(&local
->set_tim_lock
);
3045 schedule_work(&local
->set_tim_queue
);
3051 static void handle_set_tim_queue(void *data
)
3053 local_info_t
*local
= (local_info_t
*) data
;
3054 struct set_tim_data
*entry
;
3059 spin_lock_bh(&local
->set_tim_lock
);
3060 if (!list_empty(&local
->set_tim_list
)) {
3061 entry
= list_entry(local
->set_tim_list
.next
,
3062 struct set_tim_data
, list
);
3063 list_del(&entry
->list
);
3065 spin_unlock_bh(&local
->set_tim_lock
);
3069 PDEBUG(DEBUG_PS2
, "%s: handle_set_tim_queue: aid=%d set=%d\n",
3070 local
->dev
->name
, entry
->aid
, entry
->set
);
3075 if (hostap_set_word(local
->dev
, HFA384X_RID_CNFTIMCTRL
, val
)) {
3076 printk(KERN_DEBUG
"%s: set_tim failed (aid=%d "
3078 local
->dev
->name
, entry
->aid
, entry
->set
);
3086 static void prism2_clear_set_tim_queue(local_info_t
*local
)
3088 struct list_head
*ptr
, *n
;
3090 list_for_each_safe(ptr
, n
, &local
->set_tim_list
) {
3091 struct set_tim_data
*entry
;
3092 entry
= list_entry(ptr
, struct set_tim_data
, list
);
3093 list_del(&entry
->list
);
3099 static struct net_device
*
3100 prism2_init_local_data(struct prism2_helper_functions
*funcs
, int card_idx
,
3101 struct device
*sdev
)
3103 struct net_device
*dev
;
3104 struct hostap_interface
*iface
;
3105 struct local_info
*local
;
3111 len
= strlen(dev_template
);
3112 if (len
>= IFNAMSIZ
|| strstr(dev_template
, "%d") == NULL
) {
3113 printk(KERN_WARNING
"hostap: Invalid dev_template='%s'\n",
3118 len
= sizeof(struct hostap_interface
) +
3119 3 + sizeof(struct local_info
) +
3120 3 + sizeof(struct ap_data
);
3122 dev
= alloc_etherdev(len
);
3126 iface
= netdev_priv(dev
);
3127 local
= (struct local_info
*) ((((long) (iface
+ 1)) + 3) & ~3);
3128 local
->ap
= (struct ap_data
*) ((((long) (local
+ 1)) + 3) & ~3);
3129 local
->dev
= iface
->dev
= dev
;
3130 iface
->local
= local
;
3131 iface
->type
= HOSTAP_INTERFACE_MASTER
;
3132 INIT_LIST_HEAD(&local
->hostap_interfaces
);
3134 local
->hw_module
= THIS_MODULE
;
3136 #ifdef PRISM2_IO_DEBUG
3137 local
->io_debug_enabled
= 1;
3138 #endif /* PRISM2_IO_DEBUG */
3140 local
->func
= funcs
;
3141 local
->func
->cmd
= hfa384x_cmd
;
3142 local
->func
->read_regs
= hfa384x_read_regs
;
3143 local
->func
->get_rid
= hfa384x_get_rid
;
3144 local
->func
->set_rid
= hfa384x_set_rid
;
3145 local
->func
->hw_enable
= prism2_hw_enable
;
3146 local
->func
->hw_config
= prism2_hw_config
;
3147 local
->func
->hw_reset
= prism2_hw_reset
;
3148 local
->func
->hw_shutdown
= prism2_hw_shutdown
;
3149 local
->func
->reset_port
= prism2_reset_port
;
3150 local
->func
->schedule_reset
= prism2_schedule_reset
;
3151 #ifdef PRISM2_DOWNLOAD_SUPPORT
3152 local
->func
->read_aux
= prism2_download_aux_dump
;
3153 local
->func
->download
= prism2_download
;
3154 #endif /* PRISM2_DOWNLOAD_SUPPORT */
3155 local
->func
->tx
= prism2_tx_80211
;
3156 local
->func
->set_tim
= prism2_set_tim
;
3157 local
->func
->need_tx_headroom
= 0; /* no need to add txdesc in
3158 * skb->data (FIX: maybe for DMA bus
3163 rwlock_init(&local
->iface_lock
);
3164 spin_lock_init(&local
->txfidlock
);
3165 spin_lock_init(&local
->cmdlock
);
3166 spin_lock_init(&local
->baplock
);
3167 spin_lock_init(&local
->lock
);
3168 init_MUTEX(&local
->rid_bap_sem
);
3170 if (card_idx
< 0 || card_idx
>= MAX_PARM_DEVICES
)
3172 local
->card_idx
= card_idx
;
3174 len
= strlen(essid
);
3175 memcpy(local
->essid
, essid
,
3176 len
> MAX_SSID_LEN
? MAX_SSID_LEN
: len
);
3177 local
->essid
[MAX_SSID_LEN
] = '\0';
3178 i
= GET_INT_PARM(iw_mode
, card_idx
);
3179 if ((i
>= IW_MODE_ADHOC
&& i
<= IW_MODE_REPEAT
) ||
3180 i
== IW_MODE_MONITOR
) {
3183 printk(KERN_WARNING
"prism2: Unknown iw_mode %d; using "
3184 "IW_MODE_MASTER\n", i
);
3185 local
->iw_mode
= IW_MODE_MASTER
;
3187 local
->channel
= GET_INT_PARM(channel
, card_idx
);
3188 local
->beacon_int
= GET_INT_PARM(beacon_int
, card_idx
);
3189 local
->dtim_period
= GET_INT_PARM(dtim_period
, card_idx
);
3190 local
->wds_max_connections
= 16;
3191 local
->tx_control
= HFA384X_TX_CTRL_FLAGS
;
3192 local
->manual_retry_count
= -1;
3193 local
->rts_threshold
= 2347;
3194 local
->fragm_threshold
= 2346;
3195 local
->rssi_to_dBm
= 100; /* default; to be overriden by
3196 * cnfDbmAdjust, if available */
3197 local
->auth_algs
= PRISM2_AUTH_OPEN
| PRISM2_AUTH_SHARED_KEY
;
3198 local
->sram_type
= -1;
3199 local
->scan_channel_mask
= 0xffff;
3201 /* Initialize task queue structures */
3202 INIT_WORK(&local
->reset_queue
, handle_reset_queue
, local
);
3203 INIT_WORK(&local
->set_multicast_list_queue
,
3204 hostap_set_multicast_list_queue
, local
->dev
);
3206 INIT_WORK(&local
->set_tim_queue
, handle_set_tim_queue
, local
);
3207 INIT_LIST_HEAD(&local
->set_tim_list
);
3208 spin_lock_init(&local
->set_tim_lock
);
3210 INIT_WORK(&local
->comms_qual_update
, handle_comms_qual_update
, local
);
3212 /* Initialize tasklets for handling hardware IRQ related operations
3213 * outside hw IRQ handler */
3214 #define HOSTAP_TASKLET_INIT(q, f, d) \
3215 do { memset((q), 0, sizeof(*(q))); (q)->func = (f); (q)->data = (d); } \
3217 HOSTAP_TASKLET_INIT(&local
->bap_tasklet
, hostap_bap_tasklet
,
3218 (unsigned long) local
);
3220 HOSTAP_TASKLET_INIT(&local
->info_tasklet
, hostap_info_tasklet
,
3221 (unsigned long) local
);
3222 hostap_info_init(local
);
3224 HOSTAP_TASKLET_INIT(&local
->rx_tasklet
,
3225 hostap_rx_tasklet
, (unsigned long) local
);
3226 skb_queue_head_init(&local
->rx_list
);
3228 HOSTAP_TASKLET_INIT(&local
->sta_tx_exc_tasklet
,
3229 hostap_sta_tx_exc_tasklet
, (unsigned long) local
);
3230 skb_queue_head_init(&local
->sta_tx_exc_list
);
3232 INIT_LIST_HEAD(&local
->cmd_queue
);
3233 init_waitqueue_head(&local
->hostscan_wq
);
3234 INIT_LIST_HEAD(&local
->crypt_deinit_list
);
3235 init_timer(&local
->crypt_deinit_timer
);
3236 local
->crypt_deinit_timer
.data
= (unsigned long) local
;
3237 local
->crypt_deinit_timer
.function
= prism2_crypt_deinit_handler
;
3239 init_timer(&local
->passive_scan_timer
);
3240 local
->passive_scan_timer
.data
= (unsigned long) local
;
3241 local
->passive_scan_timer
.function
= hostap_passive_scan
;
3243 init_timer(&local
->tick_timer
);
3244 local
->tick_timer
.data
= (unsigned long) local
;
3245 local
->tick_timer
.function
= hostap_tick_timer
;
3246 local
->tick_timer
.expires
= jiffies
+ 2 * HZ
;
3247 add_timer(&local
->tick_timer
);
3249 INIT_LIST_HEAD(&local
->bss_list
);
3251 hostap_setup_dev(dev
, local
, 1);
3252 local
->saved_eth_header_parse
= dev
->hard_header_parse
;
3254 dev
->hard_start_xmit
= hostap_master_start_xmit
;
3255 dev
->type
= ARPHRD_IEEE80211
;
3256 dev
->hard_header_parse
= hostap_80211_header_parse
;
3259 ret
= dev_alloc_name(dev
, "wifi%d");
3260 SET_NETDEV_DEV(dev
, sdev
);
3262 ret
= register_netdevice(dev
);
3265 printk(KERN_WARNING
"%s: register netdevice failed!\n",
3269 printk(KERN_INFO
"%s: Registered netdevice %s\n", dev_info
, dev
->name
);
3271 #ifndef PRISM2_NO_PROCFS_DEBUG
3272 create_proc_read_entry("registers", 0, local
->proc
,
3273 prism2_registers_proc_read
, local
);
3274 #endif /* PRISM2_NO_PROCFS_DEBUG */
3276 hostap_init_data(local
);
3285 static int hostap_hw_ready(struct net_device
*dev
)
3287 struct hostap_interface
*iface
;
3288 struct local_info
*local
;
3290 iface
= netdev_priv(dev
);
3291 local
= iface
->local
;
3292 local
->ddev
= hostap_add_interface(local
, HOSTAP_INTERFACE_MAIN
, 0,
3296 if (local
->iw_mode
== IW_MODE_INFRA
||
3297 local
->iw_mode
== IW_MODE_ADHOC
) {
3298 netif_carrier_off(local
->dev
);
3299 netif_carrier_off(local
->ddev
);
3301 hostap_init_proc(local
);
3302 hostap_init_ap_proc(local
);
3310 static void prism2_free_local_data(struct net_device
*dev
)
3312 struct hostap_tx_callback_info
*tx_cb
, *tx_cb_prev
;
3314 struct hostap_interface
*iface
;
3315 struct local_info
*local
;
3316 struct list_head
*ptr
, *n
;
3321 iface
= netdev_priv(dev
);
3322 local
= iface
->local
;
3324 /* Unregister all netdevs before freeing local data. */
3325 list_for_each_safe(ptr
, n
, &local
->hostap_interfaces
) {
3326 iface
= list_entry(ptr
, struct hostap_interface
, list
);
3327 if (iface
->type
== HOSTAP_INTERFACE_MASTER
) {
3328 /* special handling for this interface below */
3331 hostap_remove_interface(iface
->dev
, 0, 1);
3334 unregister_netdev(local
->dev
);
3336 flush_scheduled_work();
3338 if (timer_pending(&local
->crypt_deinit_timer
))
3339 del_timer(&local
->crypt_deinit_timer
);
3340 prism2_crypt_deinit_entries(local
, 1);
3342 if (timer_pending(&local
->passive_scan_timer
))
3343 del_timer(&local
->passive_scan_timer
);
3345 if (timer_pending(&local
->tick_timer
))
3346 del_timer(&local
->tick_timer
);
3348 prism2_clear_cmd_queue(local
);
3350 skb_queue_purge(&local
->info_list
);
3351 skb_queue_purge(&local
->rx_list
);
3352 skb_queue_purge(&local
->sta_tx_exc_list
);
3354 if (local
->dev_enabled
)
3355 prism2_callback(local
, PRISM2_CALLBACK_DISABLE
);
3357 for (i
= 0; i
< WEP_KEYS
; i
++) {
3358 struct ieee80211_crypt_data
*crypt
= local
->crypt
[i
];
3361 crypt
->ops
->deinit(crypt
->priv
);
3363 local
->crypt
[i
] = NULL
;
3367 if (local
->ap
!= NULL
)
3368 hostap_free_data(local
->ap
);
3370 #ifndef PRISM2_NO_PROCFS_DEBUG
3371 if (local
->proc
!= NULL
)
3372 remove_proc_entry("registers", local
->proc
);
3373 #endif /* PRISM2_NO_PROCFS_DEBUG */
3374 hostap_remove_proc(local
);
3376 tx_cb
= local
->tx_callback
;
3377 while (tx_cb
!= NULL
) {
3379 tx_cb
= tx_cb
->next
;
3383 hostap_set_hostapd(local
, 0, 0);
3384 hostap_set_hostapd_sta(local
, 0, 0);
3386 for (i
= 0; i
< PRISM2_FRAG_CACHE_LEN
; i
++) {
3387 if (local
->frag_cache
[i
].skb
!= NULL
)
3388 dev_kfree_skb(local
->frag_cache
[i
].skb
);
3391 #ifdef PRISM2_DOWNLOAD_SUPPORT
3392 prism2_download_free_data(local
->dl_pri
);
3393 prism2_download_free_data(local
->dl_sec
);
3394 #endif /* PRISM2_DOWNLOAD_SUPPORT */
3396 prism2_clear_set_tim_queue(local
);
3398 list_for_each_safe(ptr
, n
, &local
->bss_list
) {
3399 struct hostap_bss_info
*bss
=
3400 list_entry(ptr
, struct hostap_bss_info
, list
);
3405 kfree(local
->last_scan_results
);
3406 kfree(local
->generic_elem
);
3408 free_netdev(local
->dev
);
3413 static void prism2_suspend(struct net_device
*dev
)
3415 struct hostap_interface
*iface
;
3416 struct local_info
*local
;
3417 union iwreq_data wrqu
;
3420 local
= iface
->local
;
3422 /* Send disconnect event, e.g., to trigger reassociation after resume
3423 * if wpa_supplicant is used. */
3424 memset(&wrqu
, 0, sizeof(wrqu
));
3425 wrqu
.ap_addr
.sa_family
= ARPHRD_ETHER
;
3426 wireless_send_event(local
->dev
, SIOCGIWAP
, &wrqu
, NULL
);
3428 /* Disable hardware and firmware */
3429 prism2_hw_shutdown(dev
, 0);
3431 #endif /* PRISM2_PLX */
3434 /* These might at some point be compiled separately and used as separate
3435 * kernel modules or linked into one */
3436 #ifdef PRISM2_DOWNLOAD_SUPPORT
3437 #include "hostap_download.c"
3438 #endif /* PRISM2_DOWNLOAD_SUPPORT */
3440 #ifdef PRISM2_CALLBACK
3441 /* External hostap_callback.c file can be used to, e.g., blink activity led.
3442 * This can use platform specific code and must define prism2_callback()
3443 * function (if PRISM2_CALLBACK is not defined, these function calls are not
3445 #include "hostap_callback.c"
3446 #endif /* PRISM2_CALLBACK */