[TG3]: Set minimal hw interrupt mitigation.
[linux-2.6/verdex.git] / arch / alpha / kernel / sys_eb64p.c
blob61a79c354f0bdece82ed231db04aae15706fc226
1 /*
2 * linux/arch/alpha/kernel/sys_eb64p.c
4 * Copyright (C) 1995 David A Rusling
5 * Copyright (C) 1996 Jay A Estabrook
6 * Copyright (C) 1998, 1999 Richard Henderson
8 * Code supporting the EB64+ and EB66.
9 */
11 #include <linux/config.h>
12 #include <linux/kernel.h>
13 #include <linux/types.h>
14 #include <linux/mm.h>
15 #include <linux/sched.h>
16 #include <linux/pci.h>
17 #include <linux/init.h>
18 #include <linux/bitops.h>
20 #include <asm/ptrace.h>
21 #include <asm/system.h>
22 #include <asm/dma.h>
23 #include <asm/irq.h>
24 #include <asm/mmu_context.h>
25 #include <asm/io.h>
26 #include <asm/pgtable.h>
27 #include <asm/core_apecs.h>
28 #include <asm/core_lca.h>
29 #include <asm/hwrpb.h>
30 #include <asm/tlbflush.h>
32 #include "proto.h"
33 #include "irq_impl.h"
34 #include "pci_impl.h"
35 #include "machvec_impl.h"
38 /* Note mask bit is true for DISABLED irqs. */
39 static unsigned int cached_irq_mask = -1;
41 static inline void
42 eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
44 outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26));
47 static inline void
48 eb64p_enable_irq(unsigned int irq)
50 eb64p_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq));
53 static void
54 eb64p_disable_irq(unsigned int irq)
56 eb64p_update_irq_hw(irq, cached_irq_mask |= 1 << irq);
59 static unsigned int
60 eb64p_startup_irq(unsigned int irq)
62 eb64p_enable_irq(irq);
63 return 0; /* never anything pending */
66 static void
67 eb64p_end_irq(unsigned int irq)
69 if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
70 eb64p_enable_irq(irq);
73 static struct hw_interrupt_type eb64p_irq_type = {
74 .typename = "EB64P",
75 .startup = eb64p_startup_irq,
76 .shutdown = eb64p_disable_irq,
77 .enable = eb64p_enable_irq,
78 .disable = eb64p_disable_irq,
79 .ack = eb64p_disable_irq,
80 .end = eb64p_end_irq,
83 static void
84 eb64p_device_interrupt(unsigned long vector, struct pt_regs *regs)
86 unsigned long pld;
87 unsigned int i;
89 /* Read the interrupt summary registers */
90 pld = inb(0x26) | (inb(0x27) << 8);
93 * Now, for every possible bit set, work through
94 * them and call the appropriate interrupt handler.
96 while (pld) {
97 i = ffz(~pld);
98 pld &= pld - 1; /* clear least bit set */
100 if (i == 5) {
101 isa_device_interrupt(vector, regs);
102 } else {
103 handle_irq(16 + i, regs);
108 static void __init
109 eb64p_init_irq(void)
111 long i;
113 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
115 * CABRIO SRM may not set variation correctly, so here we test
116 * the high word of the interrupt summary register for the RAZ
117 * bits, and hope that a true EB64+ would read all ones...
119 if (inw(0x806) != 0xffff) {
120 extern struct alpha_machine_vector cabriolet_mv;
122 printk("Detected Cabriolet: correcting HWRPB.\n");
124 hwrpb->sys_variation |= 2L << 10;
125 hwrpb_update_checksum(hwrpb);
127 alpha_mv = cabriolet_mv;
128 alpha_mv.init_irq();
129 return;
131 #endif /* GENERIC */
133 outb(0xff, 0x26);
134 outb(0xff, 0x27);
136 init_i8259a_irqs();
138 for (i = 16; i < 32; ++i) {
139 irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
140 irq_desc[i].handler = &eb64p_irq_type;
143 common_init_isa_dma();
144 setup_irq(16+5, &isa_cascade_irqaction);
148 * PCI Fixup configuration.
150 * There are two 8 bit external summary registers as follows:
152 * Summary @ 0x26:
153 * Bit Meaning
154 * 0 Interrupt Line A from slot 0
155 * 1 Interrupt Line A from slot 1
156 * 2 Interrupt Line B from slot 0
157 * 3 Interrupt Line B from slot 1
158 * 4 Interrupt Line C from slot 0
159 * 5 Interrupt line from the two ISA PICs
160 * 6 Tulip
161 * 7 NCR SCSI
163 * Summary @ 0x27
164 * Bit Meaning
165 * 0 Interrupt Line C from slot 1
166 * 1 Interrupt Line D from slot 0
167 * 2 Interrupt Line D from slot 1
168 * 3 RAZ
169 * 4 RAZ
170 * 5 RAZ
171 * 6 RAZ
172 * 7 RAZ
174 * The device to slot mapping looks like:
176 * Slot Device
177 * 5 NCR SCSI controller
178 * 6 PCI on board slot 0
179 * 7 PCI on board slot 1
180 * 8 Intel SIO PCI-ISA bridge chip
181 * 9 Tulip - DECchip 21040 Ethernet controller
184 * This two layered interrupt approach means that we allocate IRQ 16 and
185 * above for PCI interrupts. The IRQ relates to which bit the interrupt
186 * comes in on. This makes interrupt processing much easier.
189 static int __init
190 eb64p_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
192 static char irq_tab[5][5] __initdata = {
193 /*INT INTA INTB INTC INTD */
194 {16+7, 16+7, 16+7, 16+7, 16+7}, /* IdSel 5, slot ?, ?? */
195 {16+0, 16+0, 16+2, 16+4, 16+9}, /* IdSel 6, slot ?, ?? */
196 {16+1, 16+1, 16+3, 16+8, 16+10}, /* IdSel 7, slot ?, ?? */
197 { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */
198 {16+6, 16+6, 16+6, 16+6, 16+6}, /* IdSel 9, TULIP */
200 const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
201 return COMMON_TABLE_LOOKUP;
206 * The System Vector
209 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB64P)
210 struct alpha_machine_vector eb64p_mv __initmv = {
211 .vector_name = "EB64+",
212 DO_EV4_MMU,
213 DO_DEFAULT_RTC,
214 DO_APECS_IO,
215 .machine_check = apecs_machine_check,
216 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
217 .min_io_address = DEFAULT_IO_BASE,
218 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
220 .nr_irqs = 32,
221 .device_interrupt = eb64p_device_interrupt,
223 .init_arch = apecs_init_arch,
224 .init_irq = eb64p_init_irq,
225 .init_rtc = common_init_rtc,
226 .init_pci = common_init_pci,
227 .kill_arch = NULL,
228 .pci_map_irq = eb64p_map_irq,
229 .pci_swizzle = common_swizzle,
231 ALIAS_MV(eb64p)
232 #endif
234 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66)
235 struct alpha_machine_vector eb66_mv __initmv = {
236 .vector_name = "EB66",
237 DO_EV4_MMU,
238 DO_DEFAULT_RTC,
239 DO_LCA_IO,
240 .machine_check = lca_machine_check,
241 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
242 .min_io_address = DEFAULT_IO_BASE,
243 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
245 .nr_irqs = 32,
246 .device_interrupt = eb64p_device_interrupt,
248 .init_arch = lca_init_arch,
249 .init_irq = eb64p_init_irq,
250 .init_rtc = common_init_rtc,
251 .init_pci = common_init_pci,
252 .pci_map_irq = eb64p_map_irq,
253 .pci_swizzle = common_swizzle,
255 ALIAS_MV(eb66)
256 #endif