[TG3]: Set minimal hw interrupt mitigation.

[linux-2.6/verdex.git] / arch / arm / mach-s3c2410 / clock.c

/* linux/arch/arm/mach-s3c2410/clock.c
 *
 * Copyright (c) 2004-2005 Simtec Electronics
 *      Ben Dooks <ben@simtec.co.uk>
 *
 * S3C2410 Clock control support
 *
 * Based on, and code from linux/arch/arm/mach-versatile/clock.c
 **
 **  Copyright (C) 2004 ARM Limited.
 **  Written by Deep Blue Solutions Limited.
 *
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
*/

#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/device.h>
#include <linux/sysdev.h>

#include <linux/interrupt.h>
#include <linux/ioport.h>

#include <asm/hardware.h>
#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/io.h>

#include <asm/hardware/clock.h>
#include <asm/arch/regs-clock.h>

#include "clock.h"
#include "cpu.h"

/* clock information */

static LIST_HEAD(clocks);
static DECLARE_MUTEX(clocks_sem);

/* old functions */

void inline s3c24xx_clk_enable(unsigned int clocks, unsigned int enable)
{
        unsigned long clkcon;
        unsigned long flags;

        local_irq_save(flags);

        clkcon = __raw_readl(S3C2410_CLKCON);
        clkcon &= ~clocks;

        if (enable)
                clkcon |= clocks;

        /* ensure none of the special function bits set */
        clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);

        __raw_writel(clkcon, S3C2410_CLKCON);

        local_irq_restore(flags);
}

/* enable and disable calls for use with the clk struct */

static int clk_null_enable(struct clk *clk, int enable)
{
        return 0;
}

int s3c24xx_clkcon_enable(struct clk *clk, int enable)
{
        s3c24xx_clk_enable(clk->ctrlbit, enable);
        return 0;
}

/* Clock API calls */

struct clk *clk_get(struct device *dev, const char *id)
{
        struct clk *p;
        struct clk *clk = ERR_PTR(-ENOENT);
        int idno;

        idno = (dev == NULL) ? -1 : to_platform_device(dev)->id;

        down(&clocks_sem);

        list_for_each_entry(p, &clocks, list) {
                if (p->id == idno &&
                    strcmp(id, p->name) == 0 &&
                    try_module_get(p->owner)) {
                        clk = p;
                        break;
                }
        }

        /* check for the case where a device was supplied, but the
         * clock that was being searched for is not device specific */

        if (IS_ERR(clk)) {
                list_for_each_entry(p, &clocks, list) {
                        if (p->id == -1 && strcmp(id, p->name) == 0 &&
                            try_module_get(p->owner)) {
                                clk = p;
                                break;
                        }
                }
        }

        up(&clocks_sem);
        return clk;
}

void clk_put(struct clk *clk)
{
        module_put(clk->owner);
}

int clk_enable(struct clk *clk)
{
        if (IS_ERR(clk))
                return -EINVAL;

        return (clk->enable)(clk, 1);
}

void clk_disable(struct clk *clk)
{
        if (!IS_ERR(clk))
                (clk->enable)(clk, 0);
}


int clk_use(struct clk *clk)
{
        atomic_inc(&clk->used);
        return 0;
}


void clk_unuse(struct clk *clk)
{
        atomic_dec(&clk->used);
}

unsigned long clk_get_rate(struct clk *clk)
{
        if (IS_ERR(clk))
                return 0;

        if (clk->rate != 0)
                return clk->rate;

        while (clk->parent != NULL && clk->rate == 0)
                clk = clk->parent;

        return clk->rate;
}

long clk_round_rate(struct clk *clk, unsigned long rate)
{
        return rate;
}

int clk_set_rate(struct clk *clk, unsigned long rate)
{
        return -EINVAL;
}

struct clk *clk_get_parent(struct clk *clk)
{
        return clk->parent;
}

EXPORT_SYMBOL(clk_get);
EXPORT_SYMBOL(clk_put);
EXPORT_SYMBOL(clk_enable);
EXPORT_SYMBOL(clk_disable);
EXPORT_SYMBOL(clk_use);
EXPORT_SYMBOL(clk_unuse);
EXPORT_SYMBOL(clk_get_rate);
EXPORT_SYMBOL(clk_round_rate);
EXPORT_SYMBOL(clk_set_rate);
EXPORT_SYMBOL(clk_get_parent);

/* base clocks */

static struct clk clk_xtal = {
        .name           = "xtal",
        .id             = -1,
        .rate           = 0,
        .parent         = NULL,
        .ctrlbit        = 0,
};

static struct clk clk_f = {
        .name           = "fclk",
        .id             = -1,
        .rate           = 0,
        .parent         = NULL,
        .ctrlbit        = 0,
};

static struct clk clk_h = {
        .name           = "hclk",
        .id             = -1,
        .rate           = 0,
        .parent         = NULL,
        .ctrlbit        = 0,
};

static struct clk clk_p = {
        .name           = "pclk",
        .id             = -1,
        .rate           = 0,
        .parent         = NULL,
        .ctrlbit        = 0,
};

/* clocks that could be registered by external code */

struct clk s3c24xx_dclk0 = {
        .name           = "dclk0",
        .id             = -1,
};

struct clk s3c24xx_dclk1 = {
        .name           = "dclk1",
        .id             = -1,
};

struct clk s3c24xx_clkout0 = {
        .name           = "clkout0",
        .id             = -1,
};

struct clk s3c24xx_clkout1 = {
        .name           = "clkout1",
        .id             = -1,
};

struct clk s3c24xx_uclk = {
        .name           = "uclk",
        .id             = -1,
};


/* clock definitions */

static struct clk init_clocks[] = {
        { .name    = "nand",
          .id      = -1,
          .parent  = &clk_h,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_NAND
        },
        { .name    = "lcd",
          .id      = -1,
          .parent  = &clk_h,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_LCDC
        },
        { .name    = "usb-host",
          .id      = -1,
          .parent  = &clk_h,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_USBH
        },
        { .name    = "usb-device",
          .id      = -1,
          .parent  = &clk_h,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_USBD
        },
        { .name    = "timers",
          .id      = -1,
          .parent  = &clk_p,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_PWMT
        },
        { .name    = "sdi",
          .id      = -1,
          .parent  = &clk_p,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_SDI
        },
        { .name    = "uart",
          .id      = 0,
          .parent  = &clk_p,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_UART0
        },
        { .name    = "uart",
          .id      = 1,
          .parent  = &clk_p,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_UART1
        },
        { .name    = "uart",
          .id      = 2,
          .parent  = &clk_p,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_UART2
        },
        { .name    = "gpio",
          .id      = -1,
          .parent  = &clk_p,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_GPIO
        },
        { .name    = "rtc",
          .id      = -1,
          .parent  = &clk_p,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_RTC
        },
        { .name    = "adc",
          .id      = -1,
          .parent  = &clk_p,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_ADC
        },
        { .name    = "i2c",
          .id      = -1,
          .parent  = &clk_p,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_IIC
        },
        { .name    = "iis",
          .id      = -1,
          .parent  = &clk_p,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_IIS
        },
        { .name    = "spi",
          .id      = -1,
          .parent  = &clk_p,
          .enable  = s3c24xx_clkcon_enable,
          .ctrlbit = S3C2410_CLKCON_SPI
        },
        { .name    = "watchdog",
          .id      = -1,
          .parent  = &clk_p,
          .ctrlbit = 0
        }
};

/* initialise the clock system */

int s3c24xx_register_clock(struct clk *clk)
{
        clk->owner = THIS_MODULE;
        atomic_set(&clk->used, 0);

        if (clk->enable == NULL)
                clk->enable = clk_null_enable;

        /* add to the list of available clocks */

        down(&clocks_sem);
        list_add(&clk->list, &clocks);
        up(&clocks_sem);

        return 0;
}

/* initalise all the clocks */

int __init s3c24xx_setup_clocks(unsigned long xtal,
                                unsigned long fclk,
                                unsigned long hclk,
                                unsigned long pclk)
{
        struct clk *clkp = init_clocks;
        int ptr;
        int ret;

        printk(KERN_INFO "S3C2410 Clocks, (c) 2004 Simtec Electronics\n");

        /* initialise the main system clocks */

        clk_xtal.rate = xtal;

        clk_h.rate = hclk;
        clk_p.rate = pclk;
        clk_f.rate = fclk;

        /* it looks like just setting the register here is not good
         * enough, and causes the odd hang at initial boot time, so
         * do all of them indivdually.
         *
         * I think disabling the LCD clock if the LCD is active is
         * very dangerous, and therefore the bootloader should be
         * careful to not enable the LCD clock if it is not needed.
         *
         * and of course, this looks neater
         */

        s3c24xx_clk_enable(S3C2410_CLKCON_NAND, 0);
        s3c24xx_clk_enable(S3C2410_CLKCON_USBH, 0);
        s3c24xx_clk_enable(S3C2410_CLKCON_USBD, 0);
        s3c24xx_clk_enable(S3C2410_CLKCON_ADC, 0);
        s3c24xx_clk_enable(S3C2410_CLKCON_IIC, 0);
        s3c24xx_clk_enable(S3C2410_CLKCON_SPI, 0);

        /* assume uart clocks are correctly setup */

        /* register our clocks */

        if (s3c24xx_register_clock(&clk_xtal) < 0)
                printk(KERN_ERR "failed to register master xtal\n");

        if (s3c24xx_register_clock(&clk_f) < 0)
                printk(KERN_ERR "failed to register cpu fclk\n");

        if (s3c24xx_register_clock(&clk_h) < 0)
                printk(KERN_ERR "failed to register cpu hclk\n");

        if (s3c24xx_register_clock(&clk_p) < 0)
                printk(KERN_ERR "failed to register cpu pclk\n");

        /* register clocks from clock array */

        for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
                ret = s3c24xx_register_clock(clkp);
                if (ret < 0) {
                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
                               clkp->name, ret);
                }
        }

        return 0;
}

/* S3C2440 extended clock support */

#ifdef CONFIG_CPU_S3C2440

static struct clk s3c2440_clk_upll = {
        .name           = "upll",
        .id             = -1,
};

static struct clk s3c2440_clk_cam = {
        .name           = "camif",
        .parent         = &clk_h,
        .id             = -1,
        .enable         = s3c24xx_clkcon_enable,
        .ctrlbit        = S3C2440_CLKCON_CAMERA,
};

static struct clk s3c2440_clk_ac97 = {
        .name           = "ac97",
        .parent         = &clk_p,
        .id             = -1,
        .enable         = s3c24xx_clkcon_enable,
        .ctrlbit        = S3C2440_CLKCON_CAMERA,
};

static int s3c2440_clk_add(struct sys_device *sysdev)
{
        unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);

        s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate);

        printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n",
               print_mhz(s3c2440_clk_upll.rate));

        s3c24xx_register_clock(&s3c2440_clk_ac97);
        s3c24xx_register_clock(&s3c2440_clk_cam);
        s3c24xx_register_clock(&s3c2440_clk_upll);

        clk_disable(&s3c2440_clk_ac97);
        clk_disable(&s3c2440_clk_cam);

        return 0;
}

static struct sysdev_driver s3c2440_clk_driver = {
        .add    = s3c2440_clk_add,
};

static int s3c24xx_clk_driver(void)
{
        return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
}

arch_initcall(s3c24xx_clk_driver);

#endif /* CONFIG_CPU_S3C2440 */