[TG3]: Set minimal hw interrupt mitigation.
[linux-2.6/verdex.git] / arch / arm / mach-shark / irq.c
blob6cb67bd3dfd3ebb159fe7f8525de67c6195303d0
1 /*
2 * linux/arch/arm/mach-shark/irq.c
4 * by Alexander Schulz
6 * derived from linux/arch/ppc/kernel/i8259.c and:
7 * include/asm-arm/arch-ebsa110/irq.h
8 * Copyright (C) 1996-1998 Russell King
9 */
11 #include <linux/init.h>
12 #include <linux/fs.h>
13 #include <linux/ptrace.h>
14 #include <linux/interrupt.h>
16 #include <asm/irq.h>
17 #include <asm/io.h>
18 #include <asm/mach/irq.h>
21 * 8259A PIC functions to handle ISA devices:
25 * This contains the irq mask for both 8259A irq controllers,
26 * Let through the cascade-interrupt no. 2 (ff-(1<<2)==fb)
28 static unsigned char cached_irq_mask[2] = { 0xfb, 0xff };
31 * These have to be protected by the irq controller spinlock
32 * before being called.
34 static void shark_disable_8259A_irq(unsigned int irq)
36 unsigned int mask;
37 if (irq<8) {
38 mask = 1 << irq;
39 cached_irq_mask[0] |= mask;
40 outb(cached_irq_mask[1],0xA1);
41 } else {
42 mask = 1 << (irq-8);
43 cached_irq_mask[1] |= mask;
44 outb(cached_irq_mask[0],0x21);
48 static void shark_enable_8259A_irq(unsigned int irq)
50 unsigned int mask;
51 if (irq<8) {
52 mask = ~(1 << irq);
53 cached_irq_mask[0] &= mask;
54 outb(cached_irq_mask[0],0x21);
55 } else {
56 mask = ~(1 << (irq-8));
57 cached_irq_mask[1] &= mask;
58 outb(cached_irq_mask[1],0xA1);
62 static void shark_ack_8259A_irq(unsigned int irq){}
64 static irqreturn_t bogus_int(int irq, void *dev_id, struct pt_regs *regs)
66 printk("Got interrupt %i!\n",irq);
67 return IRQ_NONE;
70 static struct irqaction cascade;
72 static struct irqchip fb_chip = {
73 .ack = shark_ack_8259A_irq,
74 .mask = shark_disable_8259A_irq,
75 .unmask = shark_enable_8259A_irq,
78 void __init shark_init_irq(void)
80 int irq;
82 for (irq = 0; irq < NR_IRQS; irq++) {
83 set_irq_chip(irq, &fb_chip);
84 set_irq_handler(irq, do_edge_IRQ);
85 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
88 /* init master interrupt controller */
89 outb(0x11, 0x20); /* Start init sequence, edge triggered (level: 0x19)*/
90 outb(0x00, 0x21); /* Vector base */
91 outb(0x04, 0x21); /* Cascade (slave) on IRQ2 */
92 outb(0x03, 0x21); /* Select 8086 mode , auto eoi*/
93 outb(0x0A, 0x20);
94 /* init slave interrupt controller */
95 outb(0x11, 0xA0); /* Start init sequence, edge triggered */
96 outb(0x08, 0xA1); /* Vector base */
97 outb(0x02, 0xA1); /* Cascade (slave) on IRQ2 */
98 outb(0x03, 0xA1); /* Select 8086 mode, auto eoi */
99 outb(0x0A, 0xA0);
100 outb(cached_irq_mask[1],0xA1);
101 outb(cached_irq_mask[0],0x21);
102 //request_region(0x20,0x2,"pic1");
103 //request_region(0xA0,0x2,"pic2");
105 cascade.handler = bogus_int;
106 cascade.name = "cascade";
107 setup_irq(2,&cascade);