1 /* $Id: sbus.c,v 1.19 2002/01/23 11:27:32 davem Exp $
2 * sbus.c: UltraSparc SBUS controller support.
4 * Copyright (C) 1999 David S. Miller (davem@redhat.com)
7 #include <linux/kernel.h>
8 #include <linux/types.h>
10 #include <linux/spinlock.h>
11 #include <linux/slab.h>
12 #include <linux/init.h>
13 #include <linux/interrupt.h>
19 #include <asm/cache.h>
22 #include <asm/starfire.h>
24 #include "iommu_common.h"
26 /* These should be allocated on an SMP_CACHE_BYTES
27 * aligned boundary for optimal performance.
29 * On SYSIO, using an 8K page size we have 1GB of SBUS
30 * DMA space mapped. We divide this space into equally
31 * sized clusters. We allocate a DMA mapping from the
32 * cluster that matches the order of the allocation, or
33 * if the order is greater than the number of clusters,
34 * we try to allocate from the last cluster.
38 #define ONE_GIG (1UL * 1024UL * 1024UL * 1024UL)
39 #define CLUSTER_SIZE (ONE_GIG / NCLUSTERS)
40 #define CLUSTER_MASK (CLUSTER_SIZE - 1)
41 #define CLUSTER_NPAGES (CLUSTER_SIZE >> IO_PAGE_SHIFT)
42 #define MAP_BASE ((u32)0xc0000000)
45 /*0x00*/spinlock_t lock
;
47 /*0x08*/iopte_t
*page_table
;
48 /*0x10*/unsigned long strbuf_regs
;
49 /*0x18*/unsigned long iommu_regs
;
50 /*0x20*/unsigned long sbus_control_reg
;
52 /*0x28*/volatile unsigned long strbuf_flushflag
;
54 /* If NCLUSTERS is ever decresed to 4 or lower,
55 * you must increase the size of the type of
56 * these counters. You have been duly warned. -DaveM
61 } alloc_info
[NCLUSTERS
];
63 /* The lowest used consistent mapping entry. Since
64 * we allocate consistent maps out of cluster 0 this
65 * is relative to the beginning of closter 0.
67 /*0x50*/u32 lowest_consistent_map
;
70 /* Offsets from iommu_regs */
71 #define SYSIO_IOMMUREG_BASE 0x2400UL
72 #define IOMMU_CONTROL (0x2400UL - 0x2400UL) /* IOMMU control register */
73 #define IOMMU_TSBBASE (0x2408UL - 0x2400UL) /* TSB base address register */
74 #define IOMMU_FLUSH (0x2410UL - 0x2400UL) /* IOMMU flush register */
75 #define IOMMU_VADIAG (0x4400UL - 0x2400UL) /* SBUS virtual address diagnostic */
76 #define IOMMU_TAGCMP (0x4408UL - 0x2400UL) /* TLB tag compare diagnostics */
77 #define IOMMU_LRUDIAG (0x4500UL - 0x2400UL) /* IOMMU LRU queue diagnostics */
78 #define IOMMU_TAGDIAG (0x4580UL - 0x2400UL) /* TLB tag diagnostics */
79 #define IOMMU_DRAMDIAG (0x4600UL - 0x2400UL) /* TLB data RAM diagnostics */
81 #define IOMMU_DRAM_VALID (1UL << 30UL)
83 static void __iommu_flushall(struct sbus_iommu
*iommu
)
85 unsigned long tag
= iommu
->iommu_regs
+ IOMMU_TAGDIAG
;
88 for (entry
= 0; entry
< 16; entry
++) {
92 upa_readq(iommu
->sbus_control_reg
);
94 for (entry
= 0; entry
< NCLUSTERS
; entry
++) {
95 iommu
->alloc_info
[entry
].flush
=
96 iommu
->alloc_info
[entry
].next
;
100 static void iommu_flush(struct sbus_iommu
*iommu
, u32 base
, unsigned long npages
)
103 upa_writeq(base
+ (npages
<< IO_PAGE_SHIFT
),
104 iommu
->iommu_regs
+ IOMMU_FLUSH
);
105 upa_readq(iommu
->sbus_control_reg
);
108 /* Offsets from strbuf_regs */
109 #define SYSIO_STRBUFREG_BASE 0x2800UL
110 #define STRBUF_CONTROL (0x2800UL - 0x2800UL) /* Control */
111 #define STRBUF_PFLUSH (0x2808UL - 0x2800UL) /* Page flush/invalidate */
112 #define STRBUF_FSYNC (0x2810UL - 0x2800UL) /* Flush synchronization */
113 #define STRBUF_DRAMDIAG (0x5000UL - 0x2800UL) /* data RAM diagnostic */
114 #define STRBUF_ERRDIAG (0x5400UL - 0x2800UL) /* error status diagnostics */
115 #define STRBUF_PTAGDIAG (0x5800UL - 0x2800UL) /* Page tag diagnostics */
116 #define STRBUF_LTAGDIAG (0x5900UL - 0x2800UL) /* Line tag diagnostics */
118 #define STRBUF_TAG_VALID 0x02UL
120 static void strbuf_flush(struct sbus_iommu
*iommu
, u32 base
, unsigned long npages
)
122 iommu
->strbuf_flushflag
= 0UL;
124 upa_writeq(base
+ (npages
<< IO_PAGE_SHIFT
),
125 iommu
->strbuf_regs
+ STRBUF_PFLUSH
);
127 /* Whoopee cushion! */
128 upa_writeq(__pa(&iommu
->strbuf_flushflag
),
129 iommu
->strbuf_regs
+ STRBUF_FSYNC
);
130 upa_readq(iommu
->sbus_control_reg
);
131 while (iommu
->strbuf_flushflag
== 0UL)
135 static iopte_t
*alloc_streaming_cluster(struct sbus_iommu
*iommu
, unsigned long npages
)
137 iopte_t
*iopte
, *limit
, *first
, *cluster
;
138 unsigned long cnum
, ent
, nent
, flush_point
, found
;
142 while ((1UL << cnum
) < npages
)
144 if(cnum
>= NCLUSTERS
) {
145 nent
= 1UL << (cnum
- NCLUSTERS
);
146 cnum
= NCLUSTERS
- 1;
148 iopte
= iommu
->page_table
+ (cnum
* CLUSTER_NPAGES
);
151 limit
= (iommu
->page_table
+
152 iommu
->lowest_consistent_map
);
154 limit
= (iopte
+ CLUSTER_NPAGES
);
156 iopte
+= ((ent
= iommu
->alloc_info
[cnum
].next
) << cnum
);
157 flush_point
= iommu
->alloc_info
[cnum
].flush
;
163 if (iopte_val(*iopte
) == 0UL) {
168 /* Used cluster in the way */
176 iopte
+= (1 << cnum
);
178 if (iopte
>= limit
) {
179 iopte
= (iommu
->page_table
+ (cnum
* CLUSTER_NPAGES
));
182 /* Multiple cluster allocations must not wrap */
186 if (ent
== flush_point
)
187 __iommu_flushall(iommu
);
192 /* ent/iopte points to the last cluster entry we're going to use,
193 * so save our place for the next allocation.
195 if ((iopte
+ (1 << cnum
)) >= limit
)
199 iommu
->alloc_info
[cnum
].next
= ent
;
200 if (ent
== flush_point
)
201 __iommu_flushall(iommu
);
203 /* I've got your streaming cluster right here buddy boy... */
207 printk(KERN_EMERG
"sbus: alloc_streaming_cluster of npages(%ld) failed!\n",
212 static void free_streaming_cluster(struct sbus_iommu
*iommu
, u32 base
, unsigned long npages
)
214 unsigned long cnum
, ent
, nent
;
219 while ((1UL << cnum
) < npages
)
221 if(cnum
>= NCLUSTERS
) {
222 nent
= 1UL << (cnum
- NCLUSTERS
);
223 cnum
= NCLUSTERS
- 1;
225 ent
= (base
& CLUSTER_MASK
) >> (IO_PAGE_SHIFT
+ cnum
);
226 iopte
= iommu
->page_table
+ ((base
- MAP_BASE
) >> IO_PAGE_SHIFT
);
228 iopte_val(*iopte
) = 0UL;
232 /* If the global flush might not have caught this entry,
233 * adjust the flush point such that we will flush before
234 * ever trying to reuse it.
236 #define between(X,Y,Z) (((Z) - (Y)) >= ((X) - (Y)))
237 if (between(ent
, iommu
->alloc_info
[cnum
].next
, iommu
->alloc_info
[cnum
].flush
))
238 iommu
->alloc_info
[cnum
].flush
= ent
;
242 /* We allocate consistent mappings from the end of cluster zero. */
243 static iopte_t
*alloc_consistent_cluster(struct sbus_iommu
*iommu
, unsigned long npages
)
247 iopte
= iommu
->page_table
+ (1 * CLUSTER_NPAGES
);
248 while (iopte
> iommu
->page_table
) {
250 if (!(iopte_val(*iopte
) & IOPTE_VALID
)) {
251 unsigned long tmp
= npages
;
255 if (iopte_val(*iopte
) & IOPTE_VALID
)
259 u32 entry
= (iopte
- iommu
->page_table
);
261 if (entry
< iommu
->lowest_consistent_map
)
262 iommu
->lowest_consistent_map
= entry
;
270 static void free_consistent_cluster(struct sbus_iommu
*iommu
, u32 base
, unsigned long npages
)
272 iopte_t
*iopte
= iommu
->page_table
+ ((base
- MAP_BASE
) >> IO_PAGE_SHIFT
);
274 if ((iopte
- iommu
->page_table
) == iommu
->lowest_consistent_map
) {
275 iopte_t
*walk
= iopte
+ npages
;
278 limit
= iommu
->page_table
+ CLUSTER_NPAGES
;
279 while (walk
< limit
) {
280 if (iopte_val(*walk
) != 0UL)
284 iommu
->lowest_consistent_map
=
285 (walk
- iommu
->page_table
);
289 *iopte
++ = __iopte(0UL);
292 void *sbus_alloc_consistent(struct sbus_dev
*sdev
, size_t size
, dma_addr_t
*dvma_addr
)
294 unsigned long order
, first_page
, flags
;
295 struct sbus_iommu
*iommu
;
300 if (size
<= 0 || sdev
== NULL
|| dvma_addr
== NULL
)
303 size
= IO_PAGE_ALIGN(size
);
304 order
= get_order(size
);
307 first_page
= __get_free_pages(GFP_KERNEL
, order
);
308 if (first_page
== 0UL)
310 memset((char *)first_page
, 0, PAGE_SIZE
<< order
);
312 iommu
= sdev
->bus
->iommu
;
314 spin_lock_irqsave(&iommu
->lock
, flags
);
315 iopte
= alloc_consistent_cluster(iommu
, size
>> IO_PAGE_SHIFT
);
317 spin_unlock_irqrestore(&iommu
->lock
, flags
);
318 free_pages(first_page
, order
);
322 /* Ok, we're committed at this point. */
323 *dvma_addr
= MAP_BASE
+ ((iopte
- iommu
->page_table
) << IO_PAGE_SHIFT
);
324 ret
= (void *) first_page
;
325 npages
= size
>> IO_PAGE_SHIFT
;
327 *iopte
++ = __iopte(IOPTE_VALID
| IOPTE_CACHE
| IOPTE_WRITE
|
328 (__pa(first_page
) & IOPTE_PAGE
));
329 first_page
+= IO_PAGE_SIZE
;
331 iommu_flush(iommu
, *dvma_addr
, size
>> IO_PAGE_SHIFT
);
332 spin_unlock_irqrestore(&iommu
->lock
, flags
);
337 void sbus_free_consistent(struct sbus_dev
*sdev
, size_t size
, void *cpu
, dma_addr_t dvma
)
339 unsigned long order
, npages
;
340 struct sbus_iommu
*iommu
;
342 if (size
<= 0 || sdev
== NULL
|| cpu
== NULL
)
345 npages
= IO_PAGE_ALIGN(size
) >> IO_PAGE_SHIFT
;
346 iommu
= sdev
->bus
->iommu
;
348 spin_lock_irq(&iommu
->lock
);
349 free_consistent_cluster(iommu
, dvma
, npages
);
350 iommu_flush(iommu
, dvma
, npages
);
351 spin_unlock_irq(&iommu
->lock
);
353 order
= get_order(size
);
355 free_pages((unsigned long)cpu
, order
);
358 dma_addr_t
sbus_map_single(struct sbus_dev
*sdev
, void *ptr
, size_t size
, int dir
)
360 struct sbus_iommu
*iommu
= sdev
->bus
->iommu
;
361 unsigned long npages
, pbase
, flags
;
363 u32 dma_base
, offset
;
364 unsigned long iopte_bits
;
366 if (dir
== SBUS_DMA_NONE
)
369 pbase
= (unsigned long) ptr
;
370 offset
= (u32
) (pbase
& ~IO_PAGE_MASK
);
371 size
= (IO_PAGE_ALIGN(pbase
+ size
) - (pbase
& IO_PAGE_MASK
));
372 pbase
= (unsigned long) __pa(pbase
& IO_PAGE_MASK
);
374 spin_lock_irqsave(&iommu
->lock
, flags
);
375 npages
= size
>> IO_PAGE_SHIFT
;
376 iopte
= alloc_streaming_cluster(iommu
, npages
);
379 dma_base
= MAP_BASE
+ ((iopte
- iommu
->page_table
) << IO_PAGE_SHIFT
);
380 npages
= size
>> IO_PAGE_SHIFT
;
381 iopte_bits
= IOPTE_VALID
| IOPTE_STBUF
| IOPTE_CACHE
;
382 if (dir
!= SBUS_DMA_TODEVICE
)
383 iopte_bits
|= IOPTE_WRITE
;
385 *iopte
++ = __iopte(iopte_bits
| (pbase
& IOPTE_PAGE
));
386 pbase
+= IO_PAGE_SIZE
;
388 npages
= size
>> IO_PAGE_SHIFT
;
389 spin_unlock_irqrestore(&iommu
->lock
, flags
);
391 return (dma_base
| offset
);
394 spin_unlock_irqrestore(&iommu
->lock
, flags
);
399 void sbus_unmap_single(struct sbus_dev
*sdev
, dma_addr_t dma_addr
, size_t size
, int direction
)
401 struct sbus_iommu
*iommu
= sdev
->bus
->iommu
;
402 u32 dma_base
= dma_addr
& IO_PAGE_MASK
;
405 size
= (IO_PAGE_ALIGN(dma_addr
+ size
) - dma_base
);
407 spin_lock_irqsave(&iommu
->lock
, flags
);
408 free_streaming_cluster(iommu
, dma_base
, size
>> IO_PAGE_SHIFT
);
409 strbuf_flush(iommu
, dma_base
, size
>> IO_PAGE_SHIFT
);
410 spin_unlock_irqrestore(&iommu
->lock
, flags
);
413 #define SG_ENT_PHYS_ADDRESS(SG) \
414 (__pa(page_address((SG)->page)) + (SG)->offset)
416 static inline void fill_sg(iopte_t
*iopte
, struct scatterlist
*sg
, int nused
, int nelems
, unsigned long iopte_bits
)
418 struct scatterlist
*dma_sg
= sg
;
419 struct scatterlist
*sg_end
= sg
+ nelems
;
422 for (i
= 0; i
< nused
; i
++) {
423 unsigned long pteval
= ~0UL;
426 dma_npages
= ((dma_sg
->dma_address
& (IO_PAGE_SIZE
- 1UL)) +
428 ((IO_PAGE_SIZE
- 1UL))) >> IO_PAGE_SHIFT
;
430 unsigned long offset
;
433 /* If we are here, we know we have at least one
434 * more page to map. So walk forward until we
435 * hit a page crossing, and begin creating new
436 * mappings from that spot.
441 tmp
= (unsigned long) SG_ENT_PHYS_ADDRESS(sg
);
443 if (((tmp
^ pteval
) >> IO_PAGE_SHIFT
) != 0UL) {
444 pteval
= tmp
& IO_PAGE_MASK
;
445 offset
= tmp
& (IO_PAGE_SIZE
- 1UL);
448 if (((tmp
^ (tmp
+ len
- 1UL)) >> IO_PAGE_SHIFT
) != 0UL) {
449 pteval
= (tmp
+ IO_PAGE_SIZE
) & IO_PAGE_MASK
;
451 len
-= (IO_PAGE_SIZE
- (tmp
& (IO_PAGE_SIZE
- 1UL)));
457 pteval
= ((pteval
& IOPTE_PAGE
) | iopte_bits
);
459 *iopte
++ = __iopte(pteval
);
460 pteval
+= IO_PAGE_SIZE
;
461 len
-= (IO_PAGE_SIZE
- offset
);
466 pteval
= (pteval
& IOPTE_PAGE
) + len
;
469 /* Skip over any tail mappings we've fully mapped,
470 * adjusting pteval along the way. Stop when we
471 * detect a page crossing event.
473 while (sg
< sg_end
&&
474 (pteval
<< (64 - IO_PAGE_SHIFT
)) != 0UL &&
475 (pteval
== SG_ENT_PHYS_ADDRESS(sg
)) &&
477 (SG_ENT_PHYS_ADDRESS(sg
) + sg
->length
- 1UL)) >> IO_PAGE_SHIFT
) == 0UL) {
478 pteval
+= sg
->length
;
481 if ((pteval
<< (64 - IO_PAGE_SHIFT
)) == 0UL)
483 } while (dma_npages
!= 0);
488 int sbus_map_sg(struct sbus_dev
*sdev
, struct scatterlist
*sg
, int nents
, int dir
)
490 struct sbus_iommu
*iommu
= sdev
->bus
->iommu
;
491 unsigned long flags
, npages
;
494 struct scatterlist
*sgtmp
;
496 unsigned long iopte_bits
;
498 if (dir
== SBUS_DMA_NONE
)
501 /* Fast path single entry scatterlists. */
504 sbus_map_single(sdev
,
505 (page_address(sg
->page
) + sg
->offset
),
507 sg
->dma_length
= sg
->length
;
511 npages
= prepare_sg(sg
, nents
);
513 spin_lock_irqsave(&iommu
->lock
, flags
);
514 iopte
= alloc_streaming_cluster(iommu
, npages
);
517 dma_base
= MAP_BASE
+ ((iopte
- iommu
->page_table
) << IO_PAGE_SHIFT
);
519 /* Normalize DVMA addresses. */
523 while (used
&& sgtmp
->dma_length
) {
524 sgtmp
->dma_address
+= dma_base
;
530 iopte_bits
= IOPTE_VALID
| IOPTE_STBUF
| IOPTE_CACHE
;
531 if (dir
!= SBUS_DMA_TODEVICE
)
532 iopte_bits
|= IOPTE_WRITE
;
534 fill_sg(iopte
, sg
, used
, nents
, iopte_bits
);
536 verify_sglist(sg
, nents
, iopte
, npages
);
538 spin_unlock_irqrestore(&iommu
->lock
, flags
);
543 spin_unlock_irqrestore(&iommu
->lock
, flags
);
548 void sbus_unmap_sg(struct sbus_dev
*sdev
, struct scatterlist
*sg
, int nents
, int direction
)
550 unsigned long size
, flags
;
551 struct sbus_iommu
*iommu
;
555 /* Fast path single entry scatterlists. */
557 sbus_unmap_single(sdev
, sg
->dma_address
, sg
->dma_length
, direction
);
561 dvma_base
= sg
[0].dma_address
& IO_PAGE_MASK
;
562 for (i
= 0; i
< nents
; i
++) {
563 if (sg
[i
].dma_length
== 0)
567 size
= IO_PAGE_ALIGN(sg
[i
].dma_address
+ sg
[i
].dma_length
) - dvma_base
;
569 iommu
= sdev
->bus
->iommu
;
570 spin_lock_irqsave(&iommu
->lock
, flags
);
571 free_streaming_cluster(iommu
, dvma_base
, size
>> IO_PAGE_SHIFT
);
572 strbuf_flush(iommu
, dvma_base
, size
>> IO_PAGE_SHIFT
);
573 spin_unlock_irqrestore(&iommu
->lock
, flags
);
576 void sbus_dma_sync_single_for_cpu(struct sbus_dev
*sdev
, dma_addr_t base
, size_t size
, int direction
)
578 struct sbus_iommu
*iommu
= sdev
->bus
->iommu
;
581 size
= (IO_PAGE_ALIGN(base
+ size
) - (base
& IO_PAGE_MASK
));
583 spin_lock_irqsave(&iommu
->lock
, flags
);
584 strbuf_flush(iommu
, base
& IO_PAGE_MASK
, size
>> IO_PAGE_SHIFT
);
585 spin_unlock_irqrestore(&iommu
->lock
, flags
);
588 void sbus_dma_sync_single_for_device(struct sbus_dev
*sdev
, dma_addr_t base
, size_t size
, int direction
)
592 void sbus_dma_sync_sg_for_cpu(struct sbus_dev
*sdev
, struct scatterlist
*sg
, int nents
, int direction
)
594 struct sbus_iommu
*iommu
= sdev
->bus
->iommu
;
595 unsigned long flags
, size
;
599 base
= sg
[0].dma_address
& IO_PAGE_MASK
;
600 for (i
= 0; i
< nents
; i
++) {
601 if (sg
[i
].dma_length
== 0)
605 size
= IO_PAGE_ALIGN(sg
[i
].dma_address
+ sg
[i
].dma_length
) - base
;
607 spin_lock_irqsave(&iommu
->lock
, flags
);
608 strbuf_flush(iommu
, base
, size
>> IO_PAGE_SHIFT
);
609 spin_unlock_irqrestore(&iommu
->lock
, flags
);
612 void sbus_dma_sync_sg_for_device(struct sbus_dev
*sdev
, struct scatterlist
*sg
, int nents
, int direction
)
616 /* Enable 64-bit DVMA mode for the given device. */
617 void sbus_set_sbus64(struct sbus_dev
*sdev
, int bursts
)
619 struct sbus_iommu
*iommu
= sdev
->bus
->iommu
;
620 int slot
= sdev
->slot
;
621 unsigned long cfg_reg
;
624 cfg_reg
= iommu
->sbus_control_reg
;
652 val
= upa_readq(cfg_reg
);
653 if (val
& (1UL << 14UL)) {
654 /* Extended transfer mode already enabled. */
658 val
|= (1UL << 14UL);
660 if (bursts
& DMA_BURST8
)
662 if (bursts
& DMA_BURST16
)
664 if (bursts
& DMA_BURST32
)
666 if (bursts
& DMA_BURST64
)
668 upa_writeq(val
, cfg_reg
);
671 /* SBUS SYSIO INO number to Sparc PIL level. */
672 static unsigned char sysio_ino_to_pil
[] = {
673 0, 4, 4, 7, 5, 7, 8, 9, /* SBUS slot 0 */
674 0, 4, 4, 7, 5, 7, 8, 9, /* SBUS slot 1 */
675 0, 4, 4, 7, 5, 7, 8, 9, /* SBUS slot 2 */
676 0, 4, 4, 7, 5, 7, 8, 9, /* SBUS slot 3 */
677 4, /* Onboard SCSI */
678 5, /* Onboard Ethernet */
679 /*XXX*/ 8, /* Onboard BPP */
682 /*XXX*/15, /* PowerFail */
685 12, /* Zilog Serial Channels (incl. Keyboard/Mouse lines) */
687 0, /* Spare Hardware (bogon for now) */
688 0, /* Keyboard (bogon for now) */
689 0, /* Mouse (bogon for now) */
690 0, /* Serial (bogon for now) */
691 0, 0, /* Bogon, Bogon */
694 0, 0, /* Bogon, Bogon */
695 15, /* Uncorrectable SBUS Error */
696 15, /* Correctable SBUS Error */
698 /*XXX*/ 0, /* Power Management (bogon for now) */
701 /* INO number to IMAP register offset for SYSIO external IRQ's.
702 * This should conform to both Sunfire/Wildfire server and Fusion
705 #define SYSIO_IMAP_SLOT0 0x2c04UL
706 #define SYSIO_IMAP_SLOT1 0x2c0cUL
707 #define SYSIO_IMAP_SLOT2 0x2c14UL
708 #define SYSIO_IMAP_SLOT3 0x2c1cUL
709 #define SYSIO_IMAP_SCSI 0x3004UL
710 #define SYSIO_IMAP_ETH 0x300cUL
711 #define SYSIO_IMAP_BPP 0x3014UL
712 #define SYSIO_IMAP_AUDIO 0x301cUL
713 #define SYSIO_IMAP_PFAIL 0x3024UL
714 #define SYSIO_IMAP_KMS 0x302cUL
715 #define SYSIO_IMAP_FLPY 0x3034UL
716 #define SYSIO_IMAP_SHW 0x303cUL
717 #define SYSIO_IMAP_KBD 0x3044UL
718 #define SYSIO_IMAP_MS 0x304cUL
719 #define SYSIO_IMAP_SER 0x3054UL
720 #define SYSIO_IMAP_TIM0 0x3064UL
721 #define SYSIO_IMAP_TIM1 0x306cUL
722 #define SYSIO_IMAP_UE 0x3074UL
723 #define SYSIO_IMAP_CE 0x307cUL
724 #define SYSIO_IMAP_SBERR 0x3084UL
725 #define SYSIO_IMAP_PMGMT 0x308cUL
726 #define SYSIO_IMAP_GFX 0x3094UL
727 #define SYSIO_IMAP_EUPA 0x309cUL
729 #define bogon ((unsigned long) -1)
730 static unsigned long sysio_irq_offsets
[] = {
731 /* SBUS Slot 0 --> 3, level 1 --> 7 */
732 SYSIO_IMAP_SLOT0
, SYSIO_IMAP_SLOT0
, SYSIO_IMAP_SLOT0
, SYSIO_IMAP_SLOT0
,
733 SYSIO_IMAP_SLOT0
, SYSIO_IMAP_SLOT0
, SYSIO_IMAP_SLOT0
, SYSIO_IMAP_SLOT0
,
734 SYSIO_IMAP_SLOT1
, SYSIO_IMAP_SLOT1
, SYSIO_IMAP_SLOT1
, SYSIO_IMAP_SLOT1
,
735 SYSIO_IMAP_SLOT1
, SYSIO_IMAP_SLOT1
, SYSIO_IMAP_SLOT1
, SYSIO_IMAP_SLOT1
,
736 SYSIO_IMAP_SLOT2
, SYSIO_IMAP_SLOT2
, SYSIO_IMAP_SLOT2
, SYSIO_IMAP_SLOT2
,
737 SYSIO_IMAP_SLOT2
, SYSIO_IMAP_SLOT2
, SYSIO_IMAP_SLOT2
, SYSIO_IMAP_SLOT2
,
738 SYSIO_IMAP_SLOT3
, SYSIO_IMAP_SLOT3
, SYSIO_IMAP_SLOT3
, SYSIO_IMAP_SLOT3
,
739 SYSIO_IMAP_SLOT3
, SYSIO_IMAP_SLOT3
, SYSIO_IMAP_SLOT3
, SYSIO_IMAP_SLOT3
,
741 /* Onboard devices (not relevant/used on SunFire). */
770 #define NUM_SYSIO_OFFSETS (sizeof(sysio_irq_offsets) / sizeof(sysio_irq_offsets[0]))
772 /* Convert Interrupt Mapping register pointer to associated
773 * Interrupt Clear register pointer, SYSIO specific version.
775 #define SYSIO_ICLR_UNUSED0 0x3400UL
776 #define SYSIO_ICLR_SLOT0 0x340cUL
777 #define SYSIO_ICLR_SLOT1 0x344cUL
778 #define SYSIO_ICLR_SLOT2 0x348cUL
779 #define SYSIO_ICLR_SLOT3 0x34ccUL
780 static unsigned long sysio_imap_to_iclr(unsigned long imap
)
782 unsigned long diff
= SYSIO_ICLR_UNUSED0
- SYSIO_IMAP_SLOT0
;
786 unsigned int sbus_build_irq(void *buscookie
, unsigned int ino
)
788 struct sbus_bus
*sbus
= (struct sbus_bus
*)buscookie
;
789 struct sbus_iommu
*iommu
= sbus
->iommu
;
790 unsigned long reg_base
= iommu
->sbus_control_reg
- 0x2000UL
;
791 unsigned long imap
, iclr
;
792 int pil
, sbus_level
= 0;
794 pil
= sysio_ino_to_pil
[ino
];
796 printk("sbus_irq_build: Bad SYSIO INO[%x]\n", ino
);
797 panic("Bad SYSIO IRQ translations...");
800 if (PIL_RESERVED(pil
))
803 imap
= sysio_irq_offsets
[ino
];
804 if (imap
== ((unsigned long)-1)) {
805 prom_printf("get_irq_translations: Bad SYSIO INO[%x] cpu[%d]\n",
811 /* SYSIO inconsistency. For external SLOTS, we have to select
812 * the right ICLR register based upon the lower SBUS irq level
816 iclr
= sysio_imap_to_iclr(imap
);
818 int sbus_slot
= (ino
& 0x18)>>3;
820 sbus_level
= ino
& 0x7;
824 iclr
= reg_base
+ SYSIO_ICLR_SLOT0
;
827 iclr
= reg_base
+ SYSIO_ICLR_SLOT1
;
830 iclr
= reg_base
+ SYSIO_ICLR_SLOT2
;
834 iclr
= reg_base
+ SYSIO_ICLR_SLOT3
;
838 iclr
+= ((unsigned long)sbus_level
- 1UL) * 8UL;
840 return build_irq(pil
, sbus_level
, iclr
, imap
);
843 /* Error interrupt handling. */
844 #define SYSIO_UE_AFSR 0x0030UL
845 #define SYSIO_UE_AFAR 0x0038UL
846 #define SYSIO_UEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */
847 #define SYSIO_UEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */
848 #define SYSIO_UEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */
849 #define SYSIO_UEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO is cause */
850 #define SYSIO_UEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */
851 #define SYSIO_UEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/
852 #define SYSIO_UEAFSR_RESV1 0x03ff000000000000UL /* Reserved */
853 #define SYSIO_UEAFSR_DOFF 0x0000e00000000000UL /* Doubleword Offset */
854 #define SYSIO_UEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */
855 #define SYSIO_UEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */
856 #define SYSIO_UEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */
857 static irqreturn_t
sysio_ue_handler(int irq
, void *dev_id
, struct pt_regs
*regs
)
859 struct sbus_bus
*sbus
= dev_id
;
860 struct sbus_iommu
*iommu
= sbus
->iommu
;
861 unsigned long reg_base
= iommu
->sbus_control_reg
- 0x2000UL
;
862 unsigned long afsr_reg
, afar_reg
;
863 unsigned long afsr
, afar
, error_bits
;
866 afsr_reg
= reg_base
+ SYSIO_UE_AFSR
;
867 afar_reg
= reg_base
+ SYSIO_UE_AFAR
;
869 /* Latch error status. */
870 afsr
= upa_readq(afsr_reg
);
871 afar
= upa_readq(afar_reg
);
873 /* Clear primary/secondary error status bits. */
875 (SYSIO_UEAFSR_PPIO
| SYSIO_UEAFSR_PDRD
| SYSIO_UEAFSR_PDWR
|
876 SYSIO_UEAFSR_SPIO
| SYSIO_UEAFSR_SDRD
| SYSIO_UEAFSR_SDWR
);
877 upa_writeq(error_bits
, afsr_reg
);
880 printk("SYSIO[%x]: Uncorrectable ECC Error, primary error type[%s]\n",
882 (((error_bits
& SYSIO_UEAFSR_PPIO
) ?
884 ((error_bits
& SYSIO_UEAFSR_PDRD
) ?
886 ((error_bits
& SYSIO_UEAFSR_PDWR
) ?
887 "DVMA Write" : "???")))));
888 printk("SYSIO[%x]: DOFF[%lx] SIZE[%lx] MID[%lx]\n",
890 (afsr
& SYSIO_UEAFSR_DOFF
) >> 45UL,
891 (afsr
& SYSIO_UEAFSR_SIZE
) >> 42UL,
892 (afsr
& SYSIO_UEAFSR_MID
) >> 37UL);
893 printk("SYSIO[%x]: AFAR[%016lx]\n", sbus
->portid
, afar
);
894 printk("SYSIO[%x]: Secondary UE errors [", sbus
->portid
);
896 if (afsr
& SYSIO_UEAFSR_SPIO
) {
900 if (afsr
& SYSIO_UEAFSR_SDRD
) {
902 printk("(DVMA Read)");
904 if (afsr
& SYSIO_UEAFSR_SDWR
) {
906 printk("(DVMA Write)");
915 #define SYSIO_CE_AFSR 0x0040UL
916 #define SYSIO_CE_AFAR 0x0048UL
917 #define SYSIO_CEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */
918 #define SYSIO_CEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */
919 #define SYSIO_CEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */
920 #define SYSIO_CEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO cause */
921 #define SYSIO_CEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */
922 #define SYSIO_CEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/
923 #define SYSIO_CEAFSR_RESV1 0x0300000000000000UL /* Reserved */
924 #define SYSIO_CEAFSR_ESYND 0x00ff000000000000UL /* Syndrome Bits */
925 #define SYSIO_CEAFSR_DOFF 0x0000e00000000000UL /* Double Offset */
926 #define SYSIO_CEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */
927 #define SYSIO_CEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */
928 #define SYSIO_CEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */
929 static irqreturn_t
sysio_ce_handler(int irq
, void *dev_id
, struct pt_regs
*regs
)
931 struct sbus_bus
*sbus
= dev_id
;
932 struct sbus_iommu
*iommu
= sbus
->iommu
;
933 unsigned long reg_base
= iommu
->sbus_control_reg
- 0x2000UL
;
934 unsigned long afsr_reg
, afar_reg
;
935 unsigned long afsr
, afar
, error_bits
;
938 afsr_reg
= reg_base
+ SYSIO_CE_AFSR
;
939 afar_reg
= reg_base
+ SYSIO_CE_AFAR
;
941 /* Latch error status. */
942 afsr
= upa_readq(afsr_reg
);
943 afar
= upa_readq(afar_reg
);
945 /* Clear primary/secondary error status bits. */
947 (SYSIO_CEAFSR_PPIO
| SYSIO_CEAFSR_PDRD
| SYSIO_CEAFSR_PDWR
|
948 SYSIO_CEAFSR_SPIO
| SYSIO_CEAFSR_SDRD
| SYSIO_CEAFSR_SDWR
);
949 upa_writeq(error_bits
, afsr_reg
);
951 printk("SYSIO[%x]: Correctable ECC Error, primary error type[%s]\n",
953 (((error_bits
& SYSIO_CEAFSR_PPIO
) ?
955 ((error_bits
& SYSIO_CEAFSR_PDRD
) ?
957 ((error_bits
& SYSIO_CEAFSR_PDWR
) ?
958 "DVMA Write" : "???")))));
960 /* XXX Use syndrome and afar to print out module string just like
961 * XXX UDB CE trap handler does... -DaveM
963 printk("SYSIO[%x]: DOFF[%lx] ECC Syndrome[%lx] Size[%lx] MID[%lx]\n",
965 (afsr
& SYSIO_CEAFSR_DOFF
) >> 45UL,
966 (afsr
& SYSIO_CEAFSR_ESYND
) >> 48UL,
967 (afsr
& SYSIO_CEAFSR_SIZE
) >> 42UL,
968 (afsr
& SYSIO_CEAFSR_MID
) >> 37UL);
969 printk("SYSIO[%x]: AFAR[%016lx]\n", sbus
->portid
, afar
);
971 printk("SYSIO[%x]: Secondary CE errors [", sbus
->portid
);
973 if (afsr
& SYSIO_CEAFSR_SPIO
) {
977 if (afsr
& SYSIO_CEAFSR_SDRD
) {
979 printk("(DVMA Read)");
981 if (afsr
& SYSIO_CEAFSR_SDWR
) {
983 printk("(DVMA Write)");
992 #define SYSIO_SBUS_AFSR 0x2010UL
993 #define SYSIO_SBUS_AFAR 0x2018UL
994 #define SYSIO_SBAFSR_PLE 0x8000000000000000UL /* Primary Late PIO Error */
995 #define SYSIO_SBAFSR_PTO 0x4000000000000000UL /* Primary SBUS Timeout */
996 #define SYSIO_SBAFSR_PBERR 0x2000000000000000UL /* Primary SBUS Error ACK */
997 #define SYSIO_SBAFSR_SLE 0x1000000000000000UL /* Secondary Late PIO Error */
998 #define SYSIO_SBAFSR_STO 0x0800000000000000UL /* Secondary SBUS Timeout */
999 #define SYSIO_SBAFSR_SBERR 0x0400000000000000UL /* Secondary SBUS Error ACK */
1000 #define SYSIO_SBAFSR_RESV1 0x03ff000000000000UL /* Reserved */
1001 #define SYSIO_SBAFSR_RD 0x0000800000000000UL /* Primary was late PIO read */
1002 #define SYSIO_SBAFSR_RESV2 0x0000600000000000UL /* Reserved */
1003 #define SYSIO_SBAFSR_SIZE 0x00001c0000000000UL /* Size of transfer */
1004 #define SYSIO_SBAFSR_MID 0x000003e000000000UL /* MID causing the error */
1005 #define SYSIO_SBAFSR_RESV3 0x0000001fffffffffUL /* Reserved */
1006 static irqreturn_t
sysio_sbus_error_handler(int irq
, void *dev_id
, struct pt_regs
*regs
)
1008 struct sbus_bus
*sbus
= dev_id
;
1009 struct sbus_iommu
*iommu
= sbus
->iommu
;
1010 unsigned long afsr_reg
, afar_reg
, reg_base
;
1011 unsigned long afsr
, afar
, error_bits
;
1014 reg_base
= iommu
->sbus_control_reg
- 0x2000UL
;
1015 afsr_reg
= reg_base
+ SYSIO_SBUS_AFSR
;
1016 afar_reg
= reg_base
+ SYSIO_SBUS_AFAR
;
1018 afsr
= upa_readq(afsr_reg
);
1019 afar
= upa_readq(afar_reg
);
1021 /* Clear primary/secondary error status bits. */
1023 (SYSIO_SBAFSR_PLE
| SYSIO_SBAFSR_PTO
| SYSIO_SBAFSR_PBERR
|
1024 SYSIO_SBAFSR_SLE
| SYSIO_SBAFSR_STO
| SYSIO_SBAFSR_SBERR
);
1025 upa_writeq(error_bits
, afsr_reg
);
1027 /* Log the error. */
1028 printk("SYSIO[%x]: SBUS Error, primary error type[%s] read(%d)\n",
1030 (((error_bits
& SYSIO_SBAFSR_PLE
) ?
1032 ((error_bits
& SYSIO_SBAFSR_PTO
) ?
1034 ((error_bits
& SYSIO_SBAFSR_PBERR
) ?
1035 "Error Ack" : "???")))),
1036 (afsr
& SYSIO_SBAFSR_RD
) ? 1 : 0);
1037 printk("SYSIO[%x]: size[%lx] MID[%lx]\n",
1039 (afsr
& SYSIO_SBAFSR_SIZE
) >> 42UL,
1040 (afsr
& SYSIO_SBAFSR_MID
) >> 37UL);
1041 printk("SYSIO[%x]: AFAR[%016lx]\n", sbus
->portid
, afar
);
1042 printk("SYSIO[%x]: Secondary SBUS errors [", sbus
->portid
);
1044 if (afsr
& SYSIO_SBAFSR_SLE
) {
1046 printk("(Late PIO Error)");
1048 if (afsr
& SYSIO_SBAFSR_STO
) {
1050 printk("(Time Out)");
1052 if (afsr
& SYSIO_SBAFSR_SBERR
) {
1054 printk("(Error Ack)");
1060 /* XXX check iommu/strbuf for further error status XXX */
1065 #define ECC_CONTROL 0x0020UL
1066 #define SYSIO_ECNTRL_ECCEN 0x8000000000000000UL /* Enable ECC Checking */
1067 #define SYSIO_ECNTRL_UEEN 0x4000000000000000UL /* Enable UE Interrupts */
1068 #define SYSIO_ECNTRL_CEEN 0x2000000000000000UL /* Enable CE Interrupts */
1070 #define SYSIO_UE_INO 0x34
1071 #define SYSIO_CE_INO 0x35
1072 #define SYSIO_SBUSERR_INO 0x36
1074 static void __init
sysio_register_error_handlers(struct sbus_bus
*sbus
)
1076 struct sbus_iommu
*iommu
= sbus
->iommu
;
1077 unsigned long reg_base
= iommu
->sbus_control_reg
- 0x2000UL
;
1081 irq
= sbus_build_irq(sbus
, SYSIO_UE_INO
);
1082 if (request_irq(irq
, sysio_ue_handler
,
1083 SA_SHIRQ
, "SYSIO UE", sbus
) < 0) {
1084 prom_printf("SYSIO[%x]: Cannot register UE interrupt.\n",
1089 irq
= sbus_build_irq(sbus
, SYSIO_CE_INO
);
1090 if (request_irq(irq
, sysio_ce_handler
,
1091 SA_SHIRQ
, "SYSIO CE", sbus
) < 0) {
1092 prom_printf("SYSIO[%x]: Cannot register CE interrupt.\n",
1097 irq
= sbus_build_irq(sbus
, SYSIO_SBUSERR_INO
);
1098 if (request_irq(irq
, sysio_sbus_error_handler
,
1099 SA_SHIRQ
, "SYSIO SBUS Error", sbus
) < 0) {
1100 prom_printf("SYSIO[%x]: Cannot register SBUS Error interrupt.\n",
1105 /* Now turn the error interrupts on and also enable ECC checking. */
1106 upa_writeq((SYSIO_ECNTRL_ECCEN
|
1109 reg_base
+ ECC_CONTROL
);
1111 control
= upa_readq(iommu
->sbus_control_reg
);
1112 control
|= 0x100UL
; /* SBUS Error Interrupt Enable */
1113 upa_writeq(control
, iommu
->sbus_control_reg
);
1116 /* Boot time initialization. */
1117 void __init
sbus_iommu_init(int prom_node
, struct sbus_bus
*sbus
)
1119 struct linux_prom64_registers rprop
;
1120 struct sbus_iommu
*iommu
;
1121 unsigned long regs
, tsb_base
;
1125 sbus
->portid
= prom_getintdefault(sbus
->prom_node
,
1128 err
= prom_getproperty(prom_node
, "reg",
1129 (char *)&rprop
, sizeof(rprop
));
1131 prom_printf("sbus_iommu_init: Cannot map SYSIO control registers.\n");
1134 regs
= rprop
.phys_addr
;
1136 iommu
= kmalloc(sizeof(*iommu
) + SMP_CACHE_BYTES
, GFP_ATOMIC
);
1137 if (iommu
== NULL
) {
1138 prom_printf("sbus_iommu_init: Fatal error, kmalloc(iommu) failed\n");
1142 /* Align on E$ line boundary. */
1143 iommu
= (struct sbus_iommu
*)
1144 (((unsigned long)iommu
+ (SMP_CACHE_BYTES
- 1UL)) &
1145 ~(SMP_CACHE_BYTES
- 1UL));
1147 memset(iommu
, 0, sizeof(*iommu
));
1149 /* We start with no consistent mappings. */
1150 iommu
->lowest_consistent_map
= CLUSTER_NPAGES
;
1152 for (i
= 0; i
< NCLUSTERS
; i
++) {
1153 iommu
->alloc_info
[i
].flush
= 0;
1154 iommu
->alloc_info
[i
].next
= 0;
1157 /* Setup spinlock. */
1158 spin_lock_init(&iommu
->lock
);
1160 /* Init register offsets. */
1161 iommu
->iommu_regs
= regs
+ SYSIO_IOMMUREG_BASE
;
1162 iommu
->strbuf_regs
= regs
+ SYSIO_STRBUFREG_BASE
;
1164 /* The SYSIO SBUS control register is used for dummy reads
1165 * in order to ensure write completion.
1167 iommu
->sbus_control_reg
= regs
+ 0x2000UL
;
1169 /* Link into SYSIO software state. */
1170 sbus
->iommu
= iommu
;
1172 printk("SYSIO: UPA portID %x, at %016lx\n",
1173 sbus
->portid
, regs
);
1175 /* Setup for TSB_SIZE=7, TBW_SIZE=0, MMU_DE=1, MMU_EN=1 */
1176 control
= upa_readq(iommu
->iommu_regs
+ IOMMU_CONTROL
);
1177 control
= ((7UL << 16UL) |
1182 /* Using the above configuration we need 1MB iommu page
1183 * table (128K ioptes * 8 bytes per iopte). This is
1184 * page order 7 on UltraSparc.
1186 tsb_base
= __get_free_pages(GFP_ATOMIC
, get_order(IO_TSB_SIZE
));
1187 if (tsb_base
== 0UL) {
1188 prom_printf("sbus_iommu_init: Fatal error, cannot alloc TSB table.\n");
1192 iommu
->page_table
= (iopte_t
*) tsb_base
;
1193 memset(iommu
->page_table
, 0, IO_TSB_SIZE
);
1195 upa_writeq(control
, iommu
->iommu_regs
+ IOMMU_CONTROL
);
1197 /* Clean out any cruft in the IOMMU using
1198 * diagnostic accesses.
1200 for (i
= 0; i
< 16; i
++) {
1201 unsigned long dram
= iommu
->iommu_regs
+ IOMMU_DRAMDIAG
;
1202 unsigned long tag
= iommu
->iommu_regs
+ IOMMU_TAGDIAG
;
1204 dram
+= (unsigned long)i
* 8UL;
1205 tag
+= (unsigned long)i
* 8UL;
1206 upa_writeq(0, dram
);
1209 upa_readq(iommu
->sbus_control_reg
);
1211 /* Give the TSB to SYSIO. */
1212 upa_writeq(__pa(tsb_base
), iommu
->iommu_regs
+ IOMMU_TSBBASE
);
1214 /* Setup streaming buffer, DE=1 SB_EN=1 */
1215 control
= (1UL << 1UL) | (1UL << 0UL);
1216 upa_writeq(control
, iommu
->strbuf_regs
+ STRBUF_CONTROL
);
1218 /* Clear out the tags using diagnostics. */
1219 for (i
= 0; i
< 16; i
++) {
1220 unsigned long ptag
, ltag
;
1222 ptag
= iommu
->strbuf_regs
+ STRBUF_PTAGDIAG
;
1223 ltag
= iommu
->strbuf_regs
+ STRBUF_LTAGDIAG
;
1224 ptag
+= (unsigned long)i
* 8UL;
1225 ltag
+= (unsigned long)i
* 8UL;
1227 upa_writeq(0UL, ptag
);
1228 upa_writeq(0UL, ltag
);
1231 /* Enable DVMA arbitration for all devices/slots. */
1232 control
= upa_readq(iommu
->sbus_control_reg
);
1234 upa_writeq(control
, iommu
->sbus_control_reg
);
1236 /* Now some Xfire specific grot... */
1237 if (this_is_starfire
)
1238 sbus
->starfire_cookie
= starfire_hookup(sbus
->portid
);
1240 sbus
->starfire_cookie
= NULL
;
1242 sysio_register_error_handlers(sbus
);