1 /******************************************************************************
3 * Module Name: utinit - Common ACPI subsystem initialization
5 *****************************************************************************/
8 * Copyright (C) 2000 - 2005, R. Byron Moore
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
45 #include <acpi/acpi.h>
46 #include <acpi/acnamesp.h>
47 #include <acpi/acevents.h>
49 #define _COMPONENT ACPI_UTILITIES
50 ACPI_MODULE_NAME ("utinit")
53 /*******************************************************************************
55 * FUNCTION: acpi_ut_fadt_register_error
57 * PARAMETERS: *register_name - Pointer to string identifying register
58 * Value - Actual register contents value
59 * acpi_test_spec_section - TDS section containing assertion
60 * acpi_assertion - Assertion number being tested
62 * RETURN: AE_BAD_VALUE
64 * DESCRIPTION: Display failure message and link failure to TDS assertion
66 ******************************************************************************/
69 acpi_ut_fadt_register_error (
76 ("Invalid FADT value %s=%X at offset %X FADT=%p\n",
77 register_name
, value
, (u32
) offset
, acpi_gbl_FADT
));
81 /******************************************************************************
83 * FUNCTION: acpi_ut_validate_fadt
89 * DESCRIPTION: Validate various ACPI registers in the FADT
91 ******************************************************************************/
94 acpi_ut_validate_fadt (
99 * Verify Fixed ACPI Description Table fields,
100 * but don't abort on any problems, just display error
102 if (acpi_gbl_FADT
->pm1_evt_len
< 4) {
103 acpi_ut_fadt_register_error ("PM1_EVT_LEN",
104 (u32
) acpi_gbl_FADT
->pm1_evt_len
,
105 ACPI_FADT_OFFSET (pm1_evt_len
));
108 if (!acpi_gbl_FADT
->pm1_cnt_len
) {
109 acpi_ut_fadt_register_error ("PM1_CNT_LEN", 0,
110 ACPI_FADT_OFFSET (pm1_cnt_len
));
113 if (!acpi_gbl_FADT
->xpm1a_evt_blk
.address
) {
114 acpi_ut_fadt_register_error ("X_PM1a_EVT_BLK", 0,
115 ACPI_FADT_OFFSET (xpm1a_evt_blk
.address
));
118 if (!acpi_gbl_FADT
->xpm1a_cnt_blk
.address
) {
119 acpi_ut_fadt_register_error ("X_PM1a_CNT_BLK", 0,
120 ACPI_FADT_OFFSET (xpm1a_cnt_blk
.address
));
123 if (!acpi_gbl_FADT
->xpm_tmr_blk
.address
) {
124 acpi_ut_fadt_register_error ("X_PM_TMR_BLK", 0,
125 ACPI_FADT_OFFSET (xpm_tmr_blk
.address
));
128 if ((acpi_gbl_FADT
->xpm2_cnt_blk
.address
&&
129 !acpi_gbl_FADT
->pm2_cnt_len
)) {
130 acpi_ut_fadt_register_error ("PM2_CNT_LEN",
131 (u32
) acpi_gbl_FADT
->pm2_cnt_len
,
132 ACPI_FADT_OFFSET (pm2_cnt_len
));
135 if (acpi_gbl_FADT
->pm_tm_len
< 4) {
136 acpi_ut_fadt_register_error ("PM_TM_LEN",
137 (u32
) acpi_gbl_FADT
->pm_tm_len
,
138 ACPI_FADT_OFFSET (pm_tm_len
));
141 /* Length of GPE blocks must be a multiple of 2 */
143 if (acpi_gbl_FADT
->xgpe0_blk
.address
&&
144 (acpi_gbl_FADT
->gpe0_blk_len
& 1)) {
145 acpi_ut_fadt_register_error ("(x)GPE0_BLK_LEN",
146 (u32
) acpi_gbl_FADT
->gpe0_blk_len
,
147 ACPI_FADT_OFFSET (gpe0_blk_len
));
150 if (acpi_gbl_FADT
->xgpe1_blk
.address
&&
151 (acpi_gbl_FADT
->gpe1_blk_len
& 1)) {
152 acpi_ut_fadt_register_error ("(x)GPE1_BLK_LEN",
153 (u32
) acpi_gbl_FADT
->gpe1_blk_len
,
154 ACPI_FADT_OFFSET (gpe1_blk_len
));
161 /******************************************************************************
163 * FUNCTION: acpi_ut_terminate
169 * DESCRIPTION: free global memory
171 ******************************************************************************/
174 acpi_ut_terminate (void)
176 struct acpi_gpe_block_info
*gpe_block
;
177 struct acpi_gpe_block_info
*next_gpe_block
;
178 struct acpi_gpe_xrupt_info
*gpe_xrupt_info
;
179 struct acpi_gpe_xrupt_info
*next_gpe_xrupt_info
;
182 ACPI_FUNCTION_TRACE ("ut_terminate");
185 /* Free global tables, etc. */
188 /* Free global GPE blocks and related info structures */
190 gpe_xrupt_info
= acpi_gbl_gpe_xrupt_list_head
;
191 while (gpe_xrupt_info
) {
192 gpe_block
= gpe_xrupt_info
->gpe_block_list_head
;
194 next_gpe_block
= gpe_block
->next
;
195 ACPI_MEM_FREE (gpe_block
->event_info
);
196 ACPI_MEM_FREE (gpe_block
->register_info
);
197 ACPI_MEM_FREE (gpe_block
);
199 gpe_block
= next_gpe_block
;
201 next_gpe_xrupt_info
= gpe_xrupt_info
->next
;
202 ACPI_MEM_FREE (gpe_xrupt_info
);
203 gpe_xrupt_info
= next_gpe_xrupt_info
;
210 /*******************************************************************************
212 * FUNCTION: acpi_ut_subsystem_shutdown
218 * DESCRIPTION: Shutdown the various subsystems. Don't delete the mutex
219 * objects here -- because the AML debugger may be still running.
221 ******************************************************************************/
224 acpi_ut_subsystem_shutdown (void)
227 ACPI_FUNCTION_TRACE ("ut_subsystem_shutdown");
229 /* Just exit if subsystem is already shutdown */
231 if (acpi_gbl_shutdown
) {
232 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
, "ACPI Subsystem is already terminated\n"));
236 /* Subsystem appears active, go ahead and shut it down */
238 acpi_gbl_shutdown
= TRUE
;
239 ACPI_DEBUG_PRINT ((ACPI_DB_INFO
, "Shutting down ACPI Subsystem...\n"));
241 /* Close the acpi_event Handling */
243 acpi_ev_terminate ();
245 /* Close the Namespace */
247 acpi_ns_terminate ();
249 /* Close the globals */
251 acpi_ut_terminate ();
253 /* Purge the local caches */
255 (void) acpi_purge_cached_objects ();
257 /* Debug only - display leftover memory allocation, if any */
259 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
260 acpi_ut_dump_allocations (ACPI_UINT32_MAX
, NULL
);