?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[TG3]: Set minimal hw interrupt mitigation.
[linux-2.6/verdex.git] / drivers / cdrom / sbpcd.h
blob2f2225f13c6f045075246f833712756d1a4a85d4
1 /*
2 * sbpcd.h Specify interface address and interface type here.
3 */
4
5 /*
6 * Attention! This file contains user-serviceable parts!
7 * I recommend to make use of it...
8 * If you feel helpless, look into Documentation/cdrom/sbpcd
9 * (good idea anyway, at least before mailing me).
10 *
11 * The definitions for the first controller can get overridden by
12 * the kernel command line ("lilo boot option").
13 * Examples:
14 * sbpcd=0x300,LaserMate
15 * or
16 * sbpcd=0x230,SoundBlaster
17 * or
18 * sbpcd=0x338,SoundScape
19 * or
20 * sbpcd=0x2C0,Teac16bit
21 *
22 * If sbpcd gets used as a module, you can load it with
23 * insmod sbpcd.o sbpcd=0x300,0
24 * or
25 * insmod sbpcd.o sbpcd=0x230,1
26 * or
27 * insmod sbpcd.o sbpcd=0x338,2
28 * or
29 * insmod sbpcd.o sbpcd=0x2C0,3
30 * respective to override the configured address and type.
31 */
32
33 /*
34 * define your CDROM port base address as CDROM_PORT
35 * and specify the type of your interface card as SBPRO.
36 *
37 * address:
38 * ========
39 * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...
40 * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ...
41 * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to
42 * specify the REAL address here, not the configuration port address. Look
43 * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let
44 * sbpcd auto-probe, if you are not firm with the address.
45 * There are some soundcards on the market with 0x0630, 0x0650, ...; their
46 * type is not obvious (both types are possible).
47 *
48 * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1.
49 * if your soundcard has its CDROM port above 0x300, specify
50 * that address and try SBPRO 0 first.
51 * if your SoundScape configuration port is at 0x330, specify
52 * 0x338 and SBPRO 2.
53 *
54 * interface type:
55 * ===============
56 * set SBPRO to 1 for "true" SoundBlaster card
57 * set SBPRO to 0 for "compatible" soundcards and
58 * for "poor" (no sound) interface cards.
59 * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards
60 * set SBPRO to 3 for Teac 16bit interface cards
61 *
62 * Almost all "compatible" sound boards need to set SBPRO to 0.
63 * If SBPRO is set wrong, the drives will get found - but any
64 * data access will give errors (audio access will work).
65 * The "OmniCD" no-sound interface card from CreativeLabs and most Teac
66 * interface cards need SBPRO 1.
67 *
68 * sound base:
69 * ===========
70 * The SOUND_BASE definition tells if we should try to turn the CD sound
71 * channels on. It will only be of use regarding soundcards with a SbPro
72 * compatible mixer.
73 *
74 * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels
75 * #define SOUND_BASE 0 leaves the soundcard untouched
76 */
77 #define CDROM_PORT 0x340 /* <-----------<< port address */
78 #define SBPRO 0 /* <-----------<< interface type */
79 #define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
80 #define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */
81
82 /*
83 * some more or less user dependent definitions - service them!
84 */
85
86 /* Set this to 0 once you have configured your interface definitions right. */
87 #define DISTRIBUTION 1
88
89 /*
90 * Time to wait after giving a message.
91 * This gets important if you enable non-standard DBG_xxx flags.
92 * You will see what happens if you omit the pause or make it
93 * too short. Be warned!
94 */
95 #define KLOGD_PAUSE 1
96
97 /* tray control: eject tray if no disk is in */
98 #if DISTRIBUTION
99 #define JUKEBOX 0
100 #else
101 #define JUKEBOX 1
102 #endif /* DISTRIBUTION */
103
104 /* tray control: eject tray after last use */
105 #if DISTRIBUTION
106 #define EJECT 0
107 #else
108 #define EJECT 1
109 #endif /* DISTRIBUTION */
110
111 /* max. number of audio frames to read with one */
112 /* request (allocates n* 2352 bytes kernel memory!) */
113 /* may be freely adjusted, f.e. 75 (= 1 sec.), at */
114 /* runtime by use of the CDROMAUDIOBUFSIZ ioctl. */
115 #define READ_AUDIO 0
116
117 /* Optimizations for the Teac CD-55A drive read performance.
118 * SBP_TEAC_SPEED can be changed here, or one can set the
119 * variable "teac" when loading as a module.
120 * Valid settings are:
121 * 0 - very slow - the recommended "DISTRIBUTION 1" setup.
122 * 1 - 2x performance with little overhead. No busy waiting.
123 * 2 - 4x performance with 5ms overhead per read. Busy wait.
124 *
125 * Setting SBP_TEAC_SPEED or the variable 'teac' to anything
126 * other than 0 may cause problems. If you run into them, first
127 * change SBP_TEAC_SPEED back to 0 and see if your drive responds
128 * normally. If yes, you are "allowed" to report your case - to help
129 * me with the driver, not to solve your hassle. Don´t mail if you
130 * simply are stuck into your own "tuning" experiments, you know?
131 */
132 #define SBP_TEAC_SPEED 1
133
134 /*==========================================================================*/
135 /*==========================================================================*/
136 /*
137 * nothing to change below here if you are not fully aware what you're doing
138 */
139 #ifndef _LINUX_SBPCD_H
140
141 #define _LINUX_SBPCD_H
142 /*==========================================================================*/
143 /*==========================================================================*/
144 /*
145 * driver's own read_ahead, data mode
146 */
147 #define SBP_BUFFER_FRAMES 8
148
149 #define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */
150 #undef FUTURE
151 #undef SAFE_MIXED
152
153 #define TEST_UPC 0
154 #define SPEA_TEST 0
155 #define TEST_STI 0
156 #define OLD_BUSY 0
157 #undef PATH_CHECK
158 #ifndef SOUND_BASE
159 #define SOUND_BASE 0
160 #endif
161 #if DISTRIBUTION
162 #undef SBP_TEAC_SPEED
163 #define SBP_TEAC_SPEED 0
164 #endif
165 /*==========================================================================*/
166 /*
167 * DDI interface definitions
168 * "invented" by Fred N. van Kempen..
169 */
170 #define DDIOCSDBG 0x9000
171
172 /*==========================================================================*/
173 /*
174 * "private" IOCTL functions
175 */
176 #define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */
177
178 /*==========================================================================*/
179 /*
180 * Debug output levels
181 */
182 #define DBG_INF 1 /* necessary information */
183 #define DBG_BSZ 2 /* BLOCK_SIZE trace */
184 #define DBG_REA 3 /* READ status trace */
185 #define DBG_CHK 4 /* MEDIA CHECK trace */
186 #define DBG_TIM 5 /* datarate timer test */
187 #define DBG_INI 6 /* initialization trace */
188 #define DBG_TOC 7 /* tell TocEntry values */
189 #define DBG_IOC 8 /* ioctl trace */
190 #define DBG_STA 9 /* ResponseStatus() trace */
191 #define DBG_ERR 10 /* cc_ReadError() trace */
192 #define DBG_CMD 11 /* cmd_out() trace */
193 #define DBG_WRN 12 /* give explanation before auto-probing */
194 #define DBG_MUL 13 /* multi session code test */
195 #define DBG_IDX 14 /* test code for drive_id !=0 */
196 #define DBG_IOX 15 /* some special information */
197 #define DBG_DID 16 /* drive ID test */
198 #define DBG_RES 17 /* drive reset info */
199 #define DBG_SPI 18 /* SpinUp test */
200 #define DBG_IOS 19 /* ioctl trace: subchannel functions */
201 #define DBG_IO2 20 /* ioctl trace: general */
202 #define DBG_UPC 21 /* show UPC information */
203 #define DBG_XA1 22 /* XA mode debugging */
204 #define DBG_LCK 23 /* door (un)lock info */
205 #define DBG_SQ1 24 /* dump SubQ frame */
206 #define DBG_AUD 25 /* READ AUDIO debugging */
207 #define DBG_SEQ 26 /* Sequoia interface configuration trace */
208 #define DBG_LCS 27 /* Longshine LCS-7260 debugging trace */
209 #define DBG_CD2 28 /* MKE/Funai CD200 debugging trace */
210 #define DBG_TEA 29 /* TEAC CD-55A debugging trace */
211 #define DBG_ECS 30 /* ECS-AT (Vertos 100) debugging trace */
212 #define DBG_000 31 /* unnecessary information */
213
214 /*==========================================================================*/
215 /*==========================================================================*/
216
217 /*
218 * bits of flags_cmd_out:
219 */
220 #define f_respo3 0x100
221 #define f_putcmd 0x80
222 #define f_respo2 0x40
223 #define f_lopsta 0x20
224 #define f_getsta 0x10
225 #define f_ResponseStatus 0x08
226 #define f_obey_p_check 0x04
227 #define f_bit1 0x02
228 #define f_wait_if_busy 0x01
229
230 /*
231 * diskstate_flags:
232 */
233 #define x80_bit 0x80
234 #define upc_bit 0x40
235 #define volume_bit 0x20
236 #define toc_bit 0x10
237 #define multisession_bit 0x08
238 #define cd_size_bit 0x04
239 #define subq_bit 0x02
240 #define frame_size_bit 0x01
241
242 /*
243 * disk states (bits of diskstate_flags):
244 */
245 #define upc_valid (current_drive->diskstate_flags&upc_bit)
246 #define volume_valid (current_drive->diskstate_flags&volume_bit)
247 #define toc_valid (current_drive->diskstate_flags&toc_bit)
248 #define cd_size_valid (current_drive->diskstate_flags&cd_size_bit)
249 #define subq_valid (current_drive->diskstate_flags&subq_bit)
250 #define frame_size_valid (current_drive->diskstate_flags&frame_size_bit)
251
252 /*
253 * the status_bits variable
254 */
255 #define p_success 0x100
256 #define p_door_closed 0x80
257 #define p_caddy_in 0x40
258 #define p_spinning 0x20
259 #define p_check 0x10
260 #define p_busy_new 0x08
261 #define p_door_locked 0x04
262 #define p_disk_ok 0x01
263
264 /*
265 * LCS-7260 special status result bits:
266 */
267 #define p_lcs_door_locked 0x02
268 #define p_lcs_door_closed 0x01 /* probably disk_in */
269
270 /*
271 * CR-52x special status result bits:
272 */
273 #define p_caddin_old 0x40
274 #define p_success_old 0x08
275 #define p_busy_old 0x04
276 #define p_bit_1 0x02 /* hopefully unused now */
277
278 /*
279 * "generation specific" defs of the status result bits:
280 */
281 #define p0_door_closed 0x80
282 #define p0_caddy_in 0x40
283 #define p0_spinning 0x20
284 #define p0_check 0x10
285 #define p0_success 0x08 /* unused */
286 #define p0_busy 0x04
287 #define p0_bit_1 0x02 /* unused */
288 #define p0_disk_ok 0x01
289
290 #define pL_disk_in 0x40
291 #define pL_spinning 0x20
292 #define pL_check 0x10
293 #define pL_success 0x08 /* unused ?? */
294 #define pL_busy 0x04
295 #define pL_door_locked 0x02
296 #define pL_door_closed 0x01
297
298 #define pV_door_closed 0x40
299 #define pV_spinning 0x20
300 #define pV_check 0x10
301 #define pV_success 0x08
302 #define pV_busy 0x04
303 #define pV_door_locked 0x02
304 #define pV_disk_ok 0x01
305
306 #define p1_door_closed 0x80
307 #define p1_disk_in 0x40
308 #define p1_spinning 0x20
309 #define p1_check 0x10
310 #define p1_busy 0x08
311 #define p1_door_locked 0x04
312 #define p1_bit_1 0x02 /* unused */
313 #define p1_disk_ok 0x01
314
315 #define p2_disk_ok 0x80
316 #define p2_door_locked 0x40
317 #define p2_spinning 0x20
318 #define p2_busy2 0x10
319 #define p2_busy1 0x08
320 #define p2_door_closed 0x04
321 #define p2_disk_in 0x02
322 #define p2_check 0x01
323
324 /*
325 * used drive states:
326 */
327 #define st_door_closed (current_drive->status_bits&p_door_closed)
328 #define st_caddy_in (current_drive->status_bits&p_caddy_in)
329 #define st_spinning (current_drive->status_bits&p_spinning)
330 #define st_check (current_drive->status_bits&p_check)
331 #define st_busy (current_drive->status_bits&p_busy_new)
332 #define st_door_locked (current_drive->status_bits&p_door_locked)
333 #define st_diskok (current_drive->status_bits&p_disk_ok)
334
335 /*
336 * bits of the CDi_status register:
337 */
338 #define s_not_result_ready 0x04 /* 0: "result ready" */
339 #define s_not_data_ready 0x02 /* 0: "data ready" */
340 #define s_attention 0x01 /* 1: "attention required" */
341 /*
342 * usable as:
343 */
344 #define DRV_ATTN ((inb(CDi_status)&s_attention)!=0)
345 #define DATA_READY ((inb(CDi_status)&s_not_data_ready)==0)
346 #define RESULT_READY ((inb(CDi_status)&s_not_result_ready)==0)
347
348 /*
349 * drive families and types (firmware versions):
350 */
351 #define drv_fam0 0x0100 /* CR-52x family */
352 #define drv_199 (drv_fam0+0x01) /* <200 */
353 #define drv_200 (drv_fam0+0x02) /* <201 */
354 #define drv_201 (drv_fam0+0x03) /* <210 */
355 #define drv_210 (drv_fam0+0x04) /* <211 */
356 #define drv_211 (drv_fam0+0x05) /* <300 */
357 #define drv_300 (drv_fam0+0x06) /* >=300 */
358
359 #define drv_fam1 0x0200 /* CR-56x family */
360 #define drv_099 (drv_fam1+0x01) /* <100 */
361 #define drv_100 (drv_fam1+0x02) /* >=100, only 1.02 and 5.00 known */
362
363 #define drv_fam2 0x0400 /* CD200 family */
364
365 #define drv_famT 0x0800 /* TEAC CD-55A */
366
367 #define drv_famL 0x1000 /* Longshine family */
368 #define drv_260 (drv_famL+0x01) /* LCS-7260 */
369 #define drv_e1 (drv_famL+0x01) /* LCS-7260, firmware "A E1" */
370 #define drv_f4 (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */
371
372 #define drv_famV 0x2000 /* ECS-AT (vertos-100) family */
373 #define drv_at (drv_famV+0x01) /* ECS-AT, firmware "1.00" */
374
375 #define fam0_drive (current_drive->drv_type&drv_fam0)
376 #define famL_drive (current_drive->drv_type&drv_famL)
377 #define famV_drive (current_drive->drv_type&drv_famV)
378 #define fam1_drive (current_drive->drv_type&drv_fam1)
379 #define fam2_drive (current_drive->drv_type&drv_fam2)
380 #define famT_drive (current_drive->drv_type&drv_famT)
381 #define fam0L_drive (current_drive->drv_type&(drv_fam0|drv_famL))
382 #define fam0V_drive (current_drive->drv_type&(drv_fam0|drv_famV))
383 #define famLV_drive (current_drive->drv_type&(drv_famL|drv_famV))
384 #define fam0LV_drive (current_drive->drv_type&(drv_fam0|drv_famL|drv_famV))
385 #define fam1L_drive (current_drive->drv_type&(drv_fam1|drv_famL))
386 #define fam1V_drive (current_drive->drv_type&(drv_fam1|drv_famV))
387 #define fam1LV_drive (current_drive->drv_type&(drv_fam1|drv_famL|drv_famV))
388 #define fam01_drive (current_drive->drv_type&(drv_fam0|drv_fam1))
389 #define fam12_drive (current_drive->drv_type&(drv_fam1|drv_fam2))
390 #define fam2T_drive (current_drive->drv_type&(drv_fam2|drv_famT))
391
392 /*
393 * audio states:
394 */
395 #define audio_completed 3 /* Forgot this one! --AJK */
396 #define audio_playing 2
397 #define audio_pausing 1
398
399 /*
400 * drv_pattern, drv_options:
401 */
402 #define speed_auto 0x80
403 #define speed_300 0x40
404 #define speed_150 0x20
405 #define audio_mono 0x04
406
407 /*
408 * values of cmd_type (0 else):
409 */
410 #define READ_M1 0x01 /* "data mode 1": 2048 bytes per frame */
411 #define READ_M2 0x02 /* "data mode 2": 12+2048+280 bytes per frame */
412 #define READ_SC 0x04 /* "subchannel info": 96 bytes per frame */
413 #define READ_AU 0x08 /* "audio frame": 2352 bytes per frame */
414
415 /*
416 * sense_byte:
417 *
418 * values: 00
419 * 01
420 * 81
421 * 82 "raw audio" mode
422 * xx from infobuf[0] after 85 00 00 00 00 00 00
423 */
424
425 /* audio status (bin) */
426 #define aud_00 0x00 /* Audio status byte not supported or not valid */
427 #define audx11 0x0b /* Audio play operation in progress */
428 #define audx12 0x0c /* Audio play operation paused */
429 #define audx13 0x0d /* Audio play operation successfully completed */
430 #define audx14 0x0e /* Audio play operation stopped due to error */
431 #define audx15 0x0f /* No current audio status to return */
432 /* audio status (bcd) */
433 #define aud_11 0x11 /* Audio play operation in progress */
434 #define aud_12 0x12 /* Audio play operation paused */
435 #define aud_13 0x13 /* Audio play operation successfully completed */
436 #define aud_14 0x14 /* Audio play operation stopped due to error */
437 #define aud_15 0x15 /* No current audio status to return */
438
439 /*
440 * highest allowed drive number (MINOR+1)
441 */
442 #define NR_SBPCD 4
443
444 /*
445 * we try to never disable interrupts - seems to work
446 */
447 #define SBPCD_DIS_IRQ 0
448
449 /*
450 * "write byte to port"
451 */
452 #define OUT(x,y) outb(y,x)
453
454 /*==========================================================================*/
455
456 #define MIXER_addr SOUND_BASE+4 /* sound card's address register */
457 #define MIXER_data SOUND_BASE+5 /* sound card's data register */
458 #define MIXER_CD_Volume 0x28 /* internal SB Pro register address */
459
460 /*==========================================================================*/
461
462 #define MAX_TRACKS 99
463
464 #define ERR_DISKCHANGE 615
465
466 /*==========================================================================*/
467 /*
468 * To make conversions easier (machine dependent!)
469 */
470 typedef union _msf
471 {
472 u_int n;
473 u_char c[4];
474 } MSF;
475
476 typedef union _blk
477 {
478 u_int n;
479 u_char c[4];
480 } BLK;
481
482 /*==========================================================================*/
483
484 /*============================================================================
485 ==============================================================================
486
487 COMMAND SET of "old" drives like CR-521, CR-522
488 (the CR-562 family is different):
489
490 No. Command Code
491 --------------------------------------------
492
493 Drive Commands:
494 1 Seek 01
495 2 Read Data 02
496 3 Read XA-Data 03
497 4 Read Header 04
498 5 Spin Up 05
499 6 Spin Down 06
500 7 Diagnostic 07
501 8 Read UPC 08
502 9 Read ISRC 09
503 10 Play Audio 0A
504 11 Play Audio MSF 0B
505 12 Play Audio Track/Index 0C
506
507 Status Commands:
508 13 Read Status 81
509 14 Read Error 82
510 15 Read Drive Version 83
511 16 Mode Select 84
512 17 Mode Sense 85
513 18 Set XA Parameter 86
514 19 Read XA Parameter 87
515 20 Read Capacity 88
516 21 Read SUB_Q 89
517 22 Read Disc Code 8A
518 23 Read Disc Information 8B
519 24 Read TOC 8C
520 25 Pause/Resume 8D
521 26 Read Packet 8E
522 27 Read Path Check 00
523
524
525 all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first
526
527 mnemo 7-byte command #bytes response (r0...rn)
528 ________ ____________________ ____
529
530 Read Status:
531 status: 81. (1) one-byte command, gives the main
532 status byte
533 Read Error:
534 check1: 82 00 00 00 00 00 00. (6) r1: audio status
535
536 Read Packet:
537 check2: 8e xx 00 00 00 00 00. (xx) gets xx bytes response, relating
538 to commands 01 04 05 07 08 09
539
540 Play Audio:
541 play: 0a ll-bb-aa nn-nn-nn. (0) play audio, ll-bb-aa: starting block (lba),
542 nn-nn-nn: #blocks
543 Play Audio MSF:
544 0b mm-ss-ff mm-ss-ff (0) play audio from/to
545
546 Play Audio Track/Index:
547 0c ...
548
549 Pause/Resume:
550 pause: 8d pr 00 00 00 00 00. (0) pause (pr=00)
551 resume (pr=80) audio playing
552
553 Mode Select:
554 84 00 nn-nn ??.?? 00 (0) nn-nn: 2048 or 2340
555 possibly defines transfer size
556
557 set_vol: 84 83 00 00 sw le 00. (0) sw(itch): lrxxxxxx (off=1)
558 le(vel): min=0, max=FF, else half
559 (firmware 2.11)
560
561 Mode Sense:
562 get_vol: 85 03 00 00 00 00 00. (2) tell current audio volume setting
563
564 Read Disc Information:
565 tocdesc: 8b 00 00 00 00 00 00. (6) read the toc descriptor ("msf-bin"-format)
566
567 Read TOC:
568 tocent: 8c fl nn 00 00 00 00. (8) read toc entry #nn
569 (fl=0:"lba"-, =2:"msf-bin"-format)
570
571 Read Capacity:
572 capacit: 88 00 00 00 00 00 00. (5) "read CD-ROM capacity"
573
574
575 Read Path Check:
576 ping: 00 00 00 00 00 00 00. (2) r0=AA, r1=55
577 ("ping" if the drive is connected)
578
579 Read Drive Version:
580 ident: 83 00 00 00 00 00 00. (12) gives "MATSHITAn.nn"
581 (n.nn = 2.01, 2.11., 3.00, ...)
582
583 Seek:
584 seek: 01 00 ll-bb-aa 00 00. (0)
585 seek: 01 02 mm-ss-ff 00 00. (0)
586
587 Read Data:
588 read: 02 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2048 bytes,
589 starting at block xx-xx-xx
590 fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
591
592 Read XA-Data:
593 read: 03 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2340 bytes,
594 starting at block xx-xx-xx
595 fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
596
597 Read SUB_Q:
598 89 fl 00 00 00 00 00. (13) r0: audio status, r4-r7: lba/msf,
599 fl=0: "lba", fl=2: "msf"
600
601 Read Disc Code:
602 8a 00 00 00 00 00 00. (14) possibly extended "check condition"-info
603
604 Read Header:
605 04 00 ll-bb-aa 00 00. (0) 4 bytes response with "check2"
606 04 02 mm-ss-ff 00 00. (0) 4 bytes response with "check2"
607
608 Spin Up:
609 05 00 ll-bb-aa 00 00. (0) possibly implies a "seek"
610
611 Spin Down:
612 06 ...
613
614 Diagnostic:
615 07 00 ll-bb-aa 00 00. (2) 2 bytes response with "check2"
616 07 02 mm-ss-ff 00 00. (2) 2 bytes response with "check2"
617
618 Read UPC:
619 08 00 ll-bb-aa 00 00. (16)
620 08 02 mm-ss-ff 00 00. (16)
621
622 Read ISRC:
623 09 00 ll-bb-aa 00 00. (15) 15 bytes response with "check2"
624 09 02 mm-ss-ff 00 00. (15) 15 bytes response with "check2"
625
626 Set XA Parameter:
627 86 ...
628
629 Read XA Parameter:
630 87 ...
631
632 ==============================================================================
633 ============================================================================*/
634
635 /*
636 * commands
637 *
638 * CR-52x: CMD0_
639 * CR-56x: CMD1_
640 * CD200: CMD2_
641 * LCS-7260: CMDL_
642 * TEAC CD-55A: CMDT_
643 * ECS-AT: CMDV_
644 */
645 #define CMD1_RESET 0x0a
646 #define CMD2_RESET 0x01
647 #define CMDT_RESET 0xc0
648
649 #define CMD1_LOCK_CTL 0x0c
650 #define CMD2_LOCK_CTL 0x1e
651 #define CMDT_LOCK_CTL CMD2_LOCK_CTL
652 #define CMDL_LOCK_CTL 0x0e
653 #define CMDV_LOCK_CTL CMDL_LOCK_CTL
654
655 #define CMD1_TRAY_CTL 0x07
656 #define CMD2_TRAY_CTL 0x1b
657 #define CMDT_TRAY_CTL CMD2_TRAY_CTL
658 #define CMDL_TRAY_CTL 0x0d
659 #define CMDV_TRAY_CTL CMDL_TRAY_CTL
660
661 #define CMD1_MULTISESS 0x8d
662 #define CMDL_MULTISESS 0x8c
663 #define CMDV_MULTISESS CMDL_MULTISESS
664
665 #define CMD1_SUBCHANINF 0x11
666 #define CMD2_SUBCHANINF 0x??
667
668 #define CMD1_ABORT 0x08
669 #define CMD2_ABORT 0x08
670 #define CMDT_ABORT 0x08
671
672 #define CMD2_x02 0x02
673
674 #define CMD2_SETSPEED 0xda
675
676 #define CMD0_PATH_CHECK 0x00
677 #define CMD1_PATH_CHECK 0x???
678 #define CMD2_PATH_CHECK 0x???
679 #define CMDT_PATH_CHECK 0x???
680 #define CMDL_PATH_CHECK CMD0_PATH_CHECK
681 #define CMDV_PATH_CHECK CMD0_PATH_CHECK
682
683 #define CMD0_SEEK 0x01
684 #define CMD1_SEEK CMD0_SEEK
685 #define CMD2_SEEK 0x2b
686 #define CMDT_SEEK CMD2_SEEK
687 #define CMDL_SEEK CMD0_SEEK
688 #define CMDV_SEEK CMD0_SEEK
689
690 #define CMD0_READ 0x02
691 #define CMD1_READ 0x10
692 #define CMD2_READ 0x28
693 #define CMDT_READ CMD2_READ
694 #define CMDL_READ CMD0_READ
695 #define CMDV_READ CMD0_READ
696
697 #define CMD0_READ_XA 0x03
698 #define CMD2_READ_XA 0xd4
699 #define CMD2_READ_XA2 0xd5
700 #define CMDL_READ_XA CMD0_READ_XA /* really ?? */
701 #define CMDV_READ_XA CMD0_READ_XA
702
703 #define CMD0_READ_HEAD 0x04
704
705 #define CMD0_SPINUP 0x05
706 #define CMD1_SPINUP 0x02
707 #define CMD2_SPINUP CMD2_TRAY_CTL
708 #define CMDL_SPINUP CMD0_SPINUP
709 #define CMDV_SPINUP CMD0_SPINUP
710
711 #define CMD0_SPINDOWN 0x06 /* really??? */
712 #define CMD1_SPINDOWN 0x06
713 #define CMD2_SPINDOWN CMD2_TRAY_CTL
714 #define CMDL_SPINDOWN 0x0d
715 #define CMDV_SPINDOWN CMD0_SPINDOWN
716
717 #define CMD0_DIAG 0x07
718
719 #define CMD0_READ_UPC 0x08
720 #define CMD1_READ_UPC 0x88
721 #define CMD2_READ_UPC 0x???
722 #define CMDL_READ_UPC CMD0_READ_UPC
723 #define CMDV_READ_UPC 0x8f
724
725 #define CMD0_READ_ISRC 0x09
726
727 #define CMD0_PLAY 0x0a
728 #define CMD1_PLAY 0x???
729 #define CMD2_PLAY 0x???
730 #define CMDL_PLAY CMD0_PLAY
731 #define CMDV_PLAY CMD0_PLAY
732
733 #define CMD0_PLAY_MSF 0x0b
734 #define CMD1_PLAY_MSF 0x0e
735 #define CMD2_PLAY_MSF 0x47
736 #define CMDT_PLAY_MSF CMD2_PLAY_MSF
737 #define CMDL_PLAY_MSF 0x???
738
739 #define CMD0_PLAY_TI 0x0c
740 #define CMD1_PLAY_TI 0x0f
741
742 #define CMD0_STATUS 0x81
743 #define CMD1_STATUS 0x05
744 #define CMD2_STATUS 0x00
745 #define CMDT_STATUS CMD2_STATUS
746 #define CMDL_STATUS CMD0_STATUS
747 #define CMDV_STATUS CMD0_STATUS
748 #define CMD2_SEEK_LEADIN 0x00
749
750 #define CMD0_READ_ERR 0x82
751 #define CMD1_READ_ERR CMD0_READ_ERR
752 #define CMD2_READ_ERR 0x03
753 #define CMDT_READ_ERR CMD2_READ_ERR /* get audio status */
754 #define CMDL_READ_ERR CMD0_READ_ERR
755 #define CMDV_READ_ERR CMD0_READ_ERR
756
757 #define CMD0_READ_VER 0x83
758 #define CMD1_READ_VER CMD0_READ_VER
759 #define CMD2_READ_VER 0x12
760 #define CMDT_READ_VER CMD2_READ_VER /* really ?? */
761 #define CMDL_READ_VER CMD0_READ_VER
762 #define CMDV_READ_VER CMD0_READ_VER
763
764 #define CMD0_SETMODE 0x84
765 #define CMD1_SETMODE 0x09
766 #define CMD2_SETMODE 0x55
767 #define CMDT_SETMODE CMD2_SETMODE
768 #define CMDL_SETMODE CMD0_SETMODE
769
770 #define CMD0_GETMODE 0x85
771 #define CMD1_GETMODE 0x84
772 #define CMD2_GETMODE 0x5a
773 #define CMDT_GETMODE CMD2_GETMODE
774 #define CMDL_GETMODE CMD0_GETMODE
775
776 #define CMD0_SET_XA 0x86
777
778 #define CMD0_GET_XA 0x87
779
780 #define CMD0_CAPACITY 0x88
781 #define CMD1_CAPACITY 0x85
782 #define CMD2_CAPACITY 0x25
783 #define CMDL_CAPACITY CMD0_CAPACITY /* missing in some firmware versions */
784
785 #define CMD0_READSUBQ 0x89
786 #define CMD1_READSUBQ 0x87
787 #define CMD2_READSUBQ 0x42
788 #define CMDT_READSUBQ CMD2_READSUBQ
789 #define CMDL_READSUBQ CMD0_READSUBQ
790 #define CMDV_READSUBQ CMD0_READSUBQ
791
792 #define CMD0_DISKCODE 0x8a
793
794 #define CMD0_DISKINFO 0x8b
795 #define CMD1_DISKINFO CMD0_DISKINFO
796 #define CMD2_DISKINFO 0x43
797 #define CMDT_DISKINFO CMD2_DISKINFO
798 #define CMDL_DISKINFO CMD0_DISKINFO
799 #define CMDV_DISKINFO CMD0_DISKINFO
800
801 #define CMD0_READTOC 0x8c
802 #define CMD1_READTOC CMD0_READTOC
803 #define CMD2_READTOC 0x???
804 #define CMDL_READTOC CMD0_READTOC
805 #define CMDV_READTOC CMD0_READTOC
806
807 #define CMD0_PAU_RES 0x8d
808 #define CMD1_PAU_RES 0x0d
809 #define CMD2_PAU_RES 0x4b
810 #define CMDT_PAUSE CMD2_PAU_RES
811 #define CMDL_PAU_RES CMD0_PAU_RES
812 #define CMDV_PAUSE CMD0_PAU_RES
813
814 #define CMD0_PACKET 0x8e
815 #define CMD1_PACKET CMD0_PACKET
816 #define CMD2_PACKET 0x???
817 #define CMDL_PACKET CMD0_PACKET
818 #define CMDV_PACKET 0x???
819
820 /*==========================================================================*/
821 /*==========================================================================*/
822 #endif /* _LINUX_SBPCD_H */
823 /*==========================================================================*/
824 /*
825 * Overrides for Emacs so that we follow Linus's tabbing style.
826 * Emacs will notice this stuff at the end of the file and automatically
827 * adjust the settings for this buffer only. This must remain at the end
828 * of the file.
829 * ---------------------------------------------------------------------------
830 * Local variables:
831 * c-indent-level: 8
832 * c-brace-imaginary-offset: 0
833 * c-brace-offset: -8
834 * c-argdecl-indent: 8
835 * c-label-offset: -8
836 * c-continued-statement-offset: 8
837 * c-continued-brace-offset: 0
838 * End:
839 */
Verdex Pro support