drivers/char/rio/daemon.h

   1 /*
   2 ** -----------------------------------------------------------------------------
   3 **
   4 **  Perle Specialix driver for Linux
   5 **  Ported from existing RIO Driver for SCO sources.
   6  *
   7  *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
   8  *
   9  *      This program is free software; you can redistribute it and/or modify
  10  *      it under the terms of the GNU General Public License as published by
  11  *      the Free Software Foundation; either version 2 of the License, or
  12  *      (at your option) any later version.
  13  *
  14  *      This program is distributed in the hope that it will be useful,
  15  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *      GNU General Public License for more details.
  18  *
  19  *      You should have received a copy of the GNU General Public License
  20  *      along with this program; if not, write to the Free Software
  21  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22 **
  23 **      Module          : daemon.h
  24 **      SID             : 1.3
  25 **      Last Modified   : 11/6/98 11:34:09
  26 **      Retrieved       : 11/6/98 11:34:21
  27 **
  28 **  ident @(#)daemon.h  1.3
  29 **
  30 ** -----------------------------------------------------------------------------
  31 */
  32
  33 #ifndef __rio_daemon_h__
  34 #define __rio_daemon_h__
  35
  36 #ifdef SCCS_LABELS
  37 #ifndef lint
  38 static char *_daemon_h_sccs_ = "@(#)daemon.h    1.3";
  39 #endif
  40 #endif
  41
  42
  43 /*
  44 ** structures used on /dev/rio
  45 */
  46
  47 struct Error
  48 {
  49         uint    Error;
  50         uint    Entry;
  51         uint    Other;
  52 };
  53
  54 struct DownLoad
  55 {
  56         char    *DataP;
  57         uint    Count;
  58         uint    ProductCode;
  59 };
  60
  61 /*
  62 ** A few constants....
  63 */
  64 #ifndef MAX_VERSION_LEN
  65 #define MAX_VERSION_LEN 256
  66 #endif
  67
  68 #ifndef MAX_XP_CTRL_LEN
  69 #define MAX_XP_CTRL_LEN 16              /* ALSO IN PORT.H */
  70 #endif
  71
  72 struct  PortSetup
  73 {
  74         uint    From;   /* Set/Clear XP & IXANY Control from this port.... */
  75         uint    To;     /* .... to this port */
  76         uint    XpCps;                  /* at this speed */
  77         char    XpOn[MAX_XP_CTRL_LEN];  /* this is the start string */
  78         char    XpOff[MAX_XP_CTRL_LEN]; /* this is the stop string */
  79         uchar   IxAny;                  /* enable/disable IXANY */
  80         uchar   IxOn;                   /* enable/disable IXON */
  81         uchar   Lock;                   /* lock port params */
  82         uchar   Store;                  /* store params across closes */
  83         uchar   Drain;                  /* close only when drained */
  84 };
  85
  86 struct  LpbReq
  87 {
  88         uint    Host;
  89         uint    Link;
  90         struct  LPB     *LpbP;
  91 };
  92
  93 struct  RupReq
  94 {
  95         uint    HostNum;
  96         uint    RupNum;
  97         struct  RUP     *RupP;
  98 };
  99
 100 struct  PortReq
 101 {
 102         uint    SysPort;
 103         struct  Port    *PortP;
 104 };
 105
 106 struct  StreamInfo
 107 {
 108         uint    SysPort;
 109 #if 0
 110         queue_t RQueue;
 111         queue_t WQueue;
 112 #else
 113         int RQueue;
 114         int WQueue;
 115 #endif
 116 };
 117
 118 struct  HostReq
 119 {
 120         uint    HostNum;
 121         struct  Host    *HostP;
 122 };
 123
 124 struct  HostDpRam
 125 {
 126         uint    HostNum;
 127         struct  DpRam   *DpRamP;
 128 };
 129
 130 struct  DebugCtrl
 131 {
 132         uint    SysPort;
 133         uint    Debug;
 134         uint    Wait;
 135 };
 136
 137 struct  MapInfo
 138 {
 139         uint    FirstPort;      /* 8 ports, starting from this (tty) number */
 140         uint    RtaUnique;      /* reside on this RTA (unique number) */
 141 };
 142
 143 struct  MapIn
 144 {
 145         uint    NumEntries;             /* How many port sets are we mapping? */
 146         struct  MapInfo *MapInfoP;      /* Pointer to (user space) info */
 147 };
 148
 149 struct  SendPack
 150 {
 151         unsigned int    PortNum;
 152         unsigned char   Len;
 153         unsigned char   Data[PKT_MAX_DATA_LEN];
 154 };
 155
 156 struct SpecialRupCmd
 157 {
 158         struct  PKT             Packet;
 159         unsigned short  Host;
 160         unsigned short  RupNum;
 161 };
 162
 163 struct  IdentifyRta
 164 {
 165         ulong   RtaUnique;
 166         uchar   ID;
 167 };
 168
 169 struct  KillNeighbour
 170 {
 171         ulong   UniqueNum;
 172         uchar   Link;
 173 };
 174
 175 struct rioVersion {
 176     char        version[MAX_VERSION_LEN];
 177     char        relid[MAX_VERSION_LEN];
 178     int         buildLevel;
 179     char        buildDate[MAX_VERSION_LEN];
 180 };
 181
 182
 183 /*
 184 **      RIOC commands are for the daemon type operations
 185 **
 186 ** 09.12.1998 ARG - ESIL 0776 part fix
 187 ** Definition for 'RIOC' also appears in rioioctl.h, so we'd better do a
 188 ** #ifndef here first.
 189 ** rioioctl.h also now has #define 'RIO_QUICK_CHECK' as this ioctl is now
 190 ** allowed to be used by customers.
 191 */
 192 #ifndef RIOC
 193 #define RIOC    ('R'<<8)|('i'<<16)|('o'<<24)
 194 #endif
 195
 196 /*
 197 ** Boot stuff
 198 */
 199 #define RIO_GET_TABLE     (RIOC | 100)
 200 #define RIO_PUT_TABLE     (RIOC | 101)
 201 #define RIO_ASSIGN_RTA    (RIOC | 102)
 202 #define RIO_DELETE_RTA    (RIOC | 103)
 203 #define RIO_HOST_FOAD     (RIOC | 104)
 204 #define RIO_QUICK_CHECK   (RIOC | 105)
 205 #define RIO_SIGNALS_ON    (RIOC | 106)
 206 #define RIO_SIGNALS_OFF   (RIOC | 107)
 207 #define RIO_CHANGE_NAME   (RIOC | 108)
 208 #define RIO_DOWNLOAD      (RIOC | 109)
 209 #define RIO_GET_LOG       (RIOC | 110)
 210 #define RIO_SETUP_PORTS   (RIOC | 111)
 211 #define RIO_ALL_MODEM     (RIOC | 112)
 212
 213 /*
 214 ** card state, debug stuff
 215 */
 216 #define RIO_NUM_HOSTS     (RIOC | 120)
 217 #define RIO_HOST_LPB      (RIOC | 121)
 218 #define RIO_HOST_RUP      (RIOC | 122)
 219 #define RIO_HOST_PORT     (RIOC | 123)
 220 #define RIO_PARMS         (RIOC | 124)
 221 #define RIO_HOST_REQ      (RIOC | 125)
 222 #define RIO_READ_CONFIG   (RIOC | 126)
 223 #define RIO_SET_CONFIG    (RIOC | 127)
 224 #define RIO_VERSID        (RIOC | 128)
 225 #define RIO_FLAGS         (RIOC | 129)
 226 #define RIO_SETDEBUG      (RIOC | 130)
 227 #define RIO_GETDEBUG      (RIOC | 131)
 228 #define RIO_READ_LEVELS   (RIOC | 132)
 229 #define RIO_SET_FAST_BUS  (RIOC | 133)
 230 #define RIO_SET_SLOW_BUS  (RIOC | 134)
 231 #define RIO_SET_BYTE_MODE (RIOC | 135)
 232 #define RIO_SET_WORD_MODE (RIOC | 136)
 233 #define RIO_STREAM_INFO   (RIOC | 137)
 234 #define RIO_START_POLLER  (RIOC | 138)
 235 #define RIO_STOP_POLLER   (RIOC | 139)
 236 #define RIO_LAST_ERROR    (RIOC | 140)
 237 #define RIO_TICK          (RIOC | 141)
 238 #define RIO_TOCK          (RIOC | 241)  /* I did this on purpose, you know. */
 239 #define RIO_SEND_PACKET   (RIOC | 142)
 240 #define RIO_SET_BUSY      (RIOC | 143)
 241 #define SPECIAL_RUP_CMD   (RIOC | 144)
 242 #define RIO_FOAD_RTA      (RIOC | 145)
 243 #define RIO_ZOMBIE_RTA    (RIOC | 146)
 244 #define RIO_IDENTIFY_RTA  (RIOC | 147)
 245 #define RIO_KILL_NEIGHBOUR (RIOC | 148)
 246 #define RIO_DEBUG_MEM     (RIOC | 149)
 247 /*
 248 ** 150 - 167 used.....   See below
 249 */
 250 #define RIO_GET_PORT_SETUP (RIOC | 168)
 251 #define RIO_RESUME        (RIOC | 169)
 252 #define RIO_MESG        (RIOC | 170)
 253 #define RIO_NO_MESG     (RIOC | 171)
 254 #define RIO_WHAT_MESG   (RIOC | 172)
 255 #define RIO_HOST_DPRAM  (RIOC | 173)
 256 #define RIO_MAP_B50_TO_50       (RIOC | 174)
 257 #define RIO_MAP_B50_TO_57600    (RIOC | 175)
 258 #define RIO_MAP_B110_TO_110     (RIOC | 176)
 259 #define RIO_MAP_B110_TO_115200  (RIOC | 177)
 260 #define RIO_GET_PORT_PARAMS     (RIOC | 178)
 261 #define RIO_SET_PORT_PARAMS     (RIOC | 179)
 262 #define RIO_GET_PORT_TTY        (RIOC | 180)
 263 #define RIO_SET_PORT_TTY        (RIOC | 181)
 264 #define RIO_SYSLOG_ONLY (RIOC | 182)
 265 #define RIO_SYSLOG_CONS (RIOC | 183)
 266 #define RIO_CONS_ONLY   (RIOC | 184)
 267 #define RIO_BLOCK_OPENS (RIOC | 185)
 268
 269 /*
 270 ** 02.03.1999 ARG - ESIL 0820 fix :
 271 ** RIOBootMode is no longer use by the driver, so these ioctls
 272 ** are now obsolete :
 273 **
 274 #define RIO_GET_BOOT_MODE       (RIOC | 186)
 275 #define RIO_SET_BOOT_MODE       (RIOC | 187)
 276 **
 277 */
 278
 279 #define RIO_MEM_DUMP    (RIOC | 189)
 280 #define RIO_READ_REGISTER       (RIOC | 190)
 281 #define RIO_GET_MODTYPE (RIOC | 191)
 282 #define RIO_SET_TIMER   (RIOC | 192)
 283 #define RIO_READ_CHECK  (RIOC | 196)
 284 #define RIO_WAITING_FOR_RESTART (RIOC | 197)
 285 #define RIO_BIND_RTA    (RIOC | 198)
 286 #define RIO_GET_BINDINGS        (RIOC | 199)
 287 #define RIO_PUT_BINDINGS        (RIOC | 200)
 288
 289 #define RIO_MAKE_DEV            (RIOC | 201)
 290 #define RIO_MINOR               (RIOC | 202)
 291
 292 #define RIO_IDENTIFY_DRIVER     (RIOC | 203)
 293 #define RIO_DISPLAY_HOST_CFG    (RIOC | 204)
 294
 295
 296 /*
 297 ** MAKE_DEV / MINOR stuff
 298 */
 299 #define RIO_DEV_DIRECT          0x0000
 300 #define RIO_DEV_MODEM           0x0200
 301 #define RIO_DEV_XPRINT          0x0400
 302 #define RIO_DEV_MASK            0x0600
 303
 304 /*
 305 ** port management, xprint stuff
 306 */
 307 #define rIOCN(N)        (RIOC|(N))
 308 #define rIOCR(N,T)      (RIOC|(N))
 309 #define rIOCW(N,T)      (RIOC|(N))
 310
 311 #define RIO_GET_XP_ON     rIOCR(150,char[16])   /* start xprint string */
 312 #define RIO_SET_XP_ON     rIOCW(151,char[16])
 313 #define RIO_GET_XP_OFF    rIOCR(152,char[16])   /* finish xprint string */
 314 #define RIO_SET_XP_OFF    rIOCW(153,char[16])
 315 #define RIO_GET_XP_CPS    rIOCR(154,int)        /* xprint CPS */
 316 #define RIO_SET_XP_CPS    rIOCW(155,int)
 317 #define RIO_GET_IXANY     rIOCR(156,int)        /* ixany allowed? */
 318 #define RIO_SET_IXANY     rIOCW(157,int)
 319 #define RIO_SET_IXANY_ON  rIOCN(158)            /* allow ixany */
 320 #define RIO_SET_IXANY_OFF rIOCN(159)            /* disallow ixany */
 321 #define RIO_GET_MODEM     rIOCR(160,int)        /* port is modem/direct line? */
 322 #define RIO_SET_MODEM     rIOCW(161,int)
 323 #define RIO_SET_MODEM_ON  rIOCN(162)            /* port is a modem */
 324 #define RIO_SET_MODEM_OFF rIOCN(163)            /* port is direct */
 325 #define RIO_GET_IXON      rIOCR(164,int)        /* ixon allowed? */
 326 #define RIO_SET_IXON      rIOCW(165,int)
 327 #define RIO_SET_IXON_ON   rIOCN(166)            /* allow ixon */
 328 #define RIO_SET_IXON_OFF  rIOCN(167)            /* disallow ixon */
 329
 330 #define RIO_GET_SIVIEW    ((('s')<<8) | 106)    /* backwards compatible with SI */
 331
 332 #define RIO_IOCTL_UNKNOWN       -2
 333
 334 #endif