[TG3]: Set minimal hw interrupt mitigation.
[linux-2.6/verdex.git] / drivers / char / watchdog / pcwd_usb.c
blob1127201d73b8940d3205c1a244f5b4920c4b42ca
1 /*
2 * Berkshire USB-PC Watchdog Card Driver
4 * (c) Copyright 2004 Wim Van Sebroeck <wim@iguana.be>.
6 * Based on source code of the following authors:
7 * Ken Hollis <kenji@bitgate.com>,
8 * Alan Cox <alan@redhat.com>,
9 * Matt Domsch <Matt_Domsch@dell.com>,
10 * Rob Radez <rob@osinvestor.com>,
11 * Greg Kroah-Hartman <greg@kroah.com>
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License
15 * as published by the Free Software Foundation; either version
16 * 2 of the License, or (at your option) any later version.
18 * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
19 * provide warranty for any of this software. This material is
20 * provided "AS-IS" and at no charge.
22 * Thanks also to Simon Machell at Berkshire Products Inc. for
23 * providing the test hardware. More info is available at
24 * http://www.berkprod.com/ or http://www.pcwatchdog.com/
27 #include <linux/config.h>
28 #include <linux/kernel.h>
29 #include <linux/errno.h>
30 #include <linux/init.h>
31 #include <linux/slab.h>
32 #include <linux/module.h>
33 #include <linux/moduleparam.h>
34 #include <linux/types.h>
35 #include <linux/delay.h>
36 #include <linux/miscdevice.h>
37 #include <linux/watchdog.h>
38 #include <linux/notifier.h>
39 #include <linux/reboot.h>
40 #include <linux/fs.h>
41 #include <linux/smp_lock.h>
42 #include <linux/completion.h>
43 #include <asm/uaccess.h>
44 #include <linux/usb.h>
47 #ifdef CONFIG_USB_DEBUG
48 static int debug = 1;
49 #else
50 static int debug;
51 #endif
53 /* Use our own dbg macro */
54 #undef dbg
55 #define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG PFX format "\n" , ## arg); } while (0)
58 /* Module and Version Information */
59 #define DRIVER_VERSION "1.01"
60 #define DRIVER_DATE "15 Mar 2005"
61 #define DRIVER_AUTHOR "Wim Van Sebroeck <wim@iguana.be>"
62 #define DRIVER_DESC "Berkshire USB-PC Watchdog driver"
63 #define DRIVER_LICENSE "GPL"
64 #define DRIVER_NAME "pcwd_usb"
65 #define PFX DRIVER_NAME ": "
67 MODULE_AUTHOR(DRIVER_AUTHOR);
68 MODULE_DESCRIPTION(DRIVER_DESC);
69 MODULE_LICENSE(DRIVER_LICENSE);
70 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
71 MODULE_ALIAS_MISCDEV(TEMP_MINOR);
73 /* Module Parameters */
74 module_param(debug, int, 0);
75 MODULE_PARM_DESC(debug, "Debug enabled or not");
77 #define WATCHDOG_HEARTBEAT 2 /* 2 sec default heartbeat */
78 static int heartbeat = WATCHDOG_HEARTBEAT;
79 module_param(heartbeat, int, 0);
80 MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0<heartbeat<65536, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
82 #ifdef CONFIG_WATCHDOG_NOWAYOUT
83 static int nowayout = 1;
84 #else
85 static int nowayout = 0;
86 #endif
88 module_param(nowayout, int, 0);
89 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
91 /* The vendor and product id's for the USB-PC Watchdog card */
92 #define USB_PCWD_VENDOR_ID 0x0c98
93 #define USB_PCWD_PRODUCT_ID 0x1140
95 /* table of devices that work with this driver */
96 static struct usb_device_id usb_pcwd_table [] = {
97 { USB_DEVICE(USB_PCWD_VENDOR_ID, USB_PCWD_PRODUCT_ID) },
98 { } /* Terminating entry */
100 MODULE_DEVICE_TABLE (usb, usb_pcwd_table);
102 /* according to documentation max. time to process a command for the USB
103 * watchdog card is 100 or 200 ms, so we give it 250 ms to do it's job */
104 #define USB_COMMAND_TIMEOUT 250
106 /* Watchdog's internal commands */
107 #define CMD_READ_TEMP 0x02 /* Read Temperature; Re-trigger Watchdog */
108 #define CMD_TRIGGER CMD_READ_TEMP
109 #define CMD_GET_STATUS 0x04 /* Get Status Information */
110 #define CMD_GET_FIRMWARE_VERSION 0x08 /* Get Firmware Version */
111 #define CMD_GET_DIP_SWITCH_SETTINGS 0x0c /* Get Dip Switch Settings */
112 #define CMD_READ_WATCHDOG_TIMEOUT 0x18 /* Read Current Watchdog Time */
113 #define CMD_WRITE_WATCHDOG_TIMEOUT 0x19 /* Write Current Watchdog Time */
114 #define CMD_ENABLE_WATCHDOG 0x30 /* Enable / Disable Watchdog */
115 #define CMD_DISABLE_WATCHDOG CMD_ENABLE_WATCHDOG
117 /* Some defines that I like to be somewhere else like include/linux/usb_hid.h */
118 #define HID_REQ_SET_REPORT 0x09
119 #define HID_DT_REPORT (USB_TYPE_CLASS | 0x02)
121 /* We can only use 1 card due to the /dev/watchdog restriction */
122 static int cards_found;
124 /* some internal variables */
125 static unsigned long is_active;
126 static char expect_release;
128 /* Structure to hold all of our device specific stuff */
129 struct usb_pcwd_private {
130 struct usb_device * udev; /* save off the usb device pointer */
131 struct usb_interface * interface; /* the interface for this device */
133 unsigned int interface_number; /* the interface number used for cmd's */
135 unsigned char * intr_buffer; /* the buffer to intr data */
136 dma_addr_t intr_dma; /* the dma address for the intr buffer */
137 size_t intr_size; /* the size of the intr buffer */
138 struct urb * intr_urb; /* the urb used for the intr pipe */
140 unsigned char cmd_command; /* The command that is reported back */
141 unsigned char cmd_data_msb; /* The data MSB that is reported back */
142 unsigned char cmd_data_lsb; /* The data LSB that is reported back */
143 atomic_t cmd_received; /* true if we received a report after a command */
145 int exists; /* Wether or not the device exists */
146 struct semaphore sem; /* locks this structure */
148 static struct usb_pcwd_private *usb_pcwd_device;
150 /* prevent races between open() and disconnect() */
151 static DECLARE_MUTEX (disconnect_sem);
153 /* local function prototypes */
154 static int usb_pcwd_probe (struct usb_interface *interface, const struct usb_device_id *id);
155 static void usb_pcwd_disconnect (struct usb_interface *interface);
157 /* usb specific object needed to register this driver with the usb subsystem */
158 static struct usb_driver usb_pcwd_driver = {
159 .owner = THIS_MODULE,
160 .name = DRIVER_NAME,
161 .probe = usb_pcwd_probe,
162 .disconnect = usb_pcwd_disconnect,
163 .id_table = usb_pcwd_table,
167 static void usb_pcwd_intr_done(struct urb *urb, struct pt_regs *regs)
169 struct usb_pcwd_private *usb_pcwd = (struct usb_pcwd_private *)urb->context;
170 unsigned char *data = usb_pcwd->intr_buffer;
171 int retval;
173 switch (urb->status) {
174 case 0: /* success */
175 break;
176 case -ECONNRESET: /* unlink */
177 case -ENOENT:
178 case -ESHUTDOWN:
179 /* this urb is terminated, clean up */
180 dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
181 return;
182 /* -EPIPE: should clear the halt */
183 default: /* error */
184 dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
185 goto resubmit;
188 dbg("received following data cmd=0x%02x msb=0x%02x lsb=0x%02x",
189 data[0], data[1], data[2]);
191 usb_pcwd->cmd_command = data[0];
192 usb_pcwd->cmd_data_msb = data[1];
193 usb_pcwd->cmd_data_lsb = data[2];
195 /* notify anyone waiting that the cmd has finished */
196 atomic_set (&usb_pcwd->cmd_received, 1);
198 resubmit:
199 retval = usb_submit_urb (urb, GFP_ATOMIC);
200 if (retval)
201 printk(KERN_ERR PFX "can't resubmit intr, usb_submit_urb failed with result %d\n",
202 retval);
205 static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, unsigned char cmd,
206 unsigned char *msb, unsigned char *lsb)
208 int got_response, count;
209 unsigned char buf[6];
211 /* We will not send any commands if the USB PCWD device does not exist */
212 if ((!usb_pcwd) || (!usb_pcwd->exists))
213 return -1;
215 /* The USB PC Watchdog uses a 6 byte report format. The board currently uses
216 * only 3 of the six bytes of the report. */
217 buf[0] = cmd; /* Byte 0 = CMD */
218 buf[1] = *msb; /* Byte 1 = Data MSB */
219 buf[2] = *lsb; /* Byte 2 = Data LSB */
220 buf[3] = buf[4] = buf[5] = 0; /* All other bytes not used */
222 dbg("sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x",
223 buf[0], buf[1], buf[2]);
225 atomic_set (&usb_pcwd->cmd_received, 0);
227 if (usb_control_msg(usb_pcwd->udev, usb_sndctrlpipe(usb_pcwd->udev, 0),
228 HID_REQ_SET_REPORT, HID_DT_REPORT,
229 0x0200, usb_pcwd->interface_number, buf, sizeof(buf),
230 USB_COMMAND_TIMEOUT) != sizeof(buf)) {
231 dbg("usb_pcwd_send_command: error in usb_control_msg for cmd 0x%x 0x%x 0x%x\n", cmd, *msb, *lsb);
233 /* wait till the usb card processed the command,
234 * with a max. timeout of USB_COMMAND_TIMEOUT */
235 got_response = 0;
236 for (count = 0; (count < USB_COMMAND_TIMEOUT) && (!got_response); count++) {
237 mdelay(1);
238 if (atomic_read (&usb_pcwd->cmd_received))
239 got_response = 1;
242 if ((got_response) && (cmd == usb_pcwd->cmd_command)) {
243 /* read back response */
244 *msb = usb_pcwd->cmd_data_msb;
245 *lsb = usb_pcwd->cmd_data_lsb;
248 return got_response;
251 static int usb_pcwd_start(struct usb_pcwd_private *usb_pcwd)
253 unsigned char msb = 0x00;
254 unsigned char lsb = 0x00;
255 int retval;
257 /* Enable Watchdog */
258 retval = usb_pcwd_send_command(usb_pcwd, CMD_ENABLE_WATCHDOG, &msb, &lsb);
260 if ((retval == 0) || (lsb == 0)) {
261 printk(KERN_ERR PFX "Card did not acknowledge enable attempt\n");
262 return -1;
265 return 0;
268 static int usb_pcwd_stop(struct usb_pcwd_private *usb_pcwd)
270 unsigned char msb = 0xA5;
271 unsigned char lsb = 0xC3;
272 int retval;
274 /* Disable Watchdog */
275 retval = usb_pcwd_send_command(usb_pcwd, CMD_DISABLE_WATCHDOG, &msb, &lsb);
277 if ((retval == 0) || (lsb != 0)) {
278 printk(KERN_ERR PFX "Card did not acknowledge disable attempt\n");
279 return -1;
282 return 0;
285 static int usb_pcwd_keepalive(struct usb_pcwd_private *usb_pcwd)
287 unsigned char dummy;
289 /* Re-trigger Watchdog */
290 usb_pcwd_send_command(usb_pcwd, CMD_TRIGGER, &dummy, &dummy);
292 return 0;
295 static int usb_pcwd_set_heartbeat(struct usb_pcwd_private *usb_pcwd, int t)
297 unsigned char msb = t / 256;
298 unsigned char lsb = t % 256;
300 if ((t < 0x0001) || (t > 0xFFFF))
301 return -EINVAL;
303 /* Write new heartbeat to watchdog */
304 usb_pcwd_send_command(usb_pcwd, CMD_WRITE_WATCHDOG_TIMEOUT, &msb, &lsb);
306 heartbeat = t;
307 return 0;
310 static int usb_pcwd_get_temperature(struct usb_pcwd_private *usb_pcwd, int *temperature)
312 unsigned char msb, lsb;
314 usb_pcwd_send_command(usb_pcwd, CMD_READ_TEMP, &msb, &lsb);
317 * Convert celsius to fahrenheit, since this was
318 * the decided 'standard' for this return value.
320 *temperature = (lsb * 9 / 5) + 32;
322 return 0;
326 * /dev/watchdog handling
329 static ssize_t usb_pcwd_write(struct file *file, const char __user *data,
330 size_t len, loff_t *ppos)
332 /* See if we got the magic character 'V' and reload the timer */
333 if (len) {
334 if (!nowayout) {
335 size_t i;
337 /* note: just in case someone wrote the magic character
338 * five months ago... */
339 expect_release = 0;
341 /* scan to see whether or not we got the magic character */
342 for (i = 0; i != len; i++) {
343 char c;
344 if(get_user(c, data+i))
345 return -EFAULT;
346 if (c == 'V')
347 expect_release = 42;
351 /* someone wrote to us, we should reload the timer */
352 usb_pcwd_keepalive(usb_pcwd_device);
354 return len;
357 static int usb_pcwd_ioctl(struct inode *inode, struct file *file,
358 unsigned int cmd, unsigned long arg)
360 void __user *argp = (void __user *)arg;
361 int __user *p = argp;
362 static struct watchdog_info ident = {
363 .options = WDIOF_KEEPALIVEPING |
364 WDIOF_SETTIMEOUT |
365 WDIOF_MAGICCLOSE,
366 .firmware_version = 1,
367 .identity = DRIVER_NAME,
370 switch (cmd) {
371 case WDIOC_GETSUPPORT:
372 return copy_to_user(argp, &ident,
373 sizeof (ident)) ? -EFAULT : 0;
375 case WDIOC_GETSTATUS:
376 case WDIOC_GETBOOTSTATUS:
377 return put_user(0, p);
379 case WDIOC_GETTEMP:
381 int temperature;
383 if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature))
384 return -EFAULT;
386 return put_user(temperature, p);
389 case WDIOC_KEEPALIVE:
390 usb_pcwd_keepalive(usb_pcwd_device);
391 return 0;
393 case WDIOC_SETOPTIONS:
395 int new_options, retval = -EINVAL;
397 if (get_user (new_options, p))
398 return -EFAULT;
400 if (new_options & WDIOS_DISABLECARD) {
401 usb_pcwd_stop(usb_pcwd_device);
402 retval = 0;
405 if (new_options & WDIOS_ENABLECARD) {
406 usb_pcwd_start(usb_pcwd_device);
407 retval = 0;
410 return retval;
413 case WDIOC_SETTIMEOUT:
415 int new_heartbeat;
417 if (get_user(new_heartbeat, p))
418 return -EFAULT;
420 if (usb_pcwd_set_heartbeat(usb_pcwd_device, new_heartbeat))
421 return -EINVAL;
423 usb_pcwd_keepalive(usb_pcwd_device);
424 /* Fall */
427 case WDIOC_GETTIMEOUT:
428 return put_user(heartbeat, p);
430 default:
431 return -ENOIOCTLCMD;
435 static int usb_pcwd_open(struct inode *inode, struct file *file)
437 /* /dev/watchdog can only be opened once */
438 if (test_and_set_bit(0, &is_active))
439 return -EBUSY;
441 /* Activate */
442 usb_pcwd_start(usb_pcwd_device);
443 usb_pcwd_keepalive(usb_pcwd_device);
444 return nonseekable_open(inode, file);
447 static int usb_pcwd_release(struct inode *inode, struct file *file)
450 * Shut off the timer.
452 if (expect_release == 42) {
453 usb_pcwd_stop(usb_pcwd_device);
454 } else {
455 printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
456 usb_pcwd_keepalive(usb_pcwd_device);
458 expect_release = 0;
459 clear_bit(0, &is_active);
460 return 0;
464 * /dev/temperature handling
467 static ssize_t usb_pcwd_temperature_read(struct file *file, char __user *data,
468 size_t len, loff_t *ppos)
470 int temperature;
472 if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature))
473 return -EFAULT;
475 if (copy_to_user(data, &temperature, 1))
476 return -EFAULT;
478 return 1;
481 static int usb_pcwd_temperature_open(struct inode *inode, struct file *file)
483 return nonseekable_open(inode, file);
486 static int usb_pcwd_temperature_release(struct inode *inode, struct file *file)
488 return 0;
492 * Notify system
495 static int usb_pcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
497 if (code==SYS_DOWN || code==SYS_HALT) {
498 /* Turn the WDT off */
499 usb_pcwd_stop(usb_pcwd_device);
502 return NOTIFY_DONE;
506 * Kernel Interfaces
509 static struct file_operations usb_pcwd_fops = {
510 .owner = THIS_MODULE,
511 .llseek = no_llseek,
512 .write = usb_pcwd_write,
513 .ioctl = usb_pcwd_ioctl,
514 .open = usb_pcwd_open,
515 .release = usb_pcwd_release,
518 static struct miscdevice usb_pcwd_miscdev = {
519 .minor = WATCHDOG_MINOR,
520 .name = "watchdog",
521 .fops = &usb_pcwd_fops,
524 static struct file_operations usb_pcwd_temperature_fops = {
525 .owner = THIS_MODULE,
526 .llseek = no_llseek,
527 .read = usb_pcwd_temperature_read,
528 .open = usb_pcwd_temperature_open,
529 .release = usb_pcwd_temperature_release,
532 static struct miscdevice usb_pcwd_temperature_miscdev = {
533 .minor = TEMP_MINOR,
534 .name = "temperature",
535 .fops = &usb_pcwd_temperature_fops,
538 static struct notifier_block usb_pcwd_notifier = {
539 .notifier_call = usb_pcwd_notify_sys,
543 * usb_pcwd_delete
545 static inline void usb_pcwd_delete (struct usb_pcwd_private *usb_pcwd)
547 if (usb_pcwd->intr_urb != NULL)
548 usb_free_urb (usb_pcwd->intr_urb);
549 if (usb_pcwd->intr_buffer != NULL)
550 usb_buffer_free(usb_pcwd->udev, usb_pcwd->intr_size,
551 usb_pcwd->intr_buffer, usb_pcwd->intr_dma);
552 kfree (usb_pcwd);
556 * usb_pcwd_probe
558 * Called by the usb core when a new device is connected that it thinks
559 * this driver might be interested in.
561 static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_device_id *id)
563 struct usb_device *udev = interface_to_usbdev(interface);
564 struct usb_host_interface *iface_desc;
565 struct usb_endpoint_descriptor *endpoint;
566 struct usb_pcwd_private *usb_pcwd = NULL;
567 int pipe, maxp;
568 int retval = -ENOMEM;
569 int got_fw_rev;
570 unsigned char fw_rev_major, fw_rev_minor;
571 char fw_ver_str[20];
572 unsigned char option_switches, dummy;
574 cards_found++;
575 if (cards_found > 1) {
576 printk(KERN_ERR PFX "This driver only supports 1 device\n");
577 return -ENODEV;
580 /* get the active interface descriptor */
581 iface_desc = interface->cur_altsetting;
583 /* check out that we have a HID device */
584 if (!(iface_desc->desc.bInterfaceClass == USB_CLASS_HID)) {
585 printk(KERN_ERR PFX "The device isn't a Human Interface Device\n");
586 return -ENODEV;
589 /* check out the endpoint: it has to be Interrupt & IN */
590 endpoint = &iface_desc->endpoint[0].desc;
592 if (!((endpoint->bEndpointAddress & USB_DIR_IN) &&
593 ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
594 == USB_ENDPOINT_XFER_INT))) {
595 /* we didn't find a Interrupt endpoint with direction IN */
596 printk(KERN_ERR PFX "Couldn't find an INTR & IN endpoint\n");
597 return -ENODEV;
600 /* get a handle to the interrupt data pipe */
601 pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
602 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
604 /* allocate memory for our device and initialize it */
605 usb_pcwd = kmalloc (sizeof(struct usb_pcwd_private), GFP_KERNEL);
606 if (usb_pcwd == NULL) {
607 printk(KERN_ERR PFX "Out of memory\n");
608 goto error;
610 memset (usb_pcwd, 0x00, sizeof (*usb_pcwd));
612 usb_pcwd_device = usb_pcwd;
614 init_MUTEX (&usb_pcwd->sem);
615 usb_pcwd->udev = udev;
616 usb_pcwd->interface = interface;
617 usb_pcwd->interface_number = iface_desc->desc.bInterfaceNumber;
618 usb_pcwd->intr_size = (le16_to_cpu(endpoint->wMaxPacketSize) > 8 ? le16_to_cpu(endpoint->wMaxPacketSize) : 8);
620 /* set up the memory buffer's */
621 if (!(usb_pcwd->intr_buffer = usb_buffer_alloc(udev, usb_pcwd->intr_size, SLAB_ATOMIC, &usb_pcwd->intr_dma))) {
622 printk(KERN_ERR PFX "Out of memory\n");
623 goto error;
626 /* allocate the urb's */
627 usb_pcwd->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
628 if (!usb_pcwd->intr_urb) {
629 printk(KERN_ERR PFX "Out of memory\n");
630 goto error;
633 /* initialise the intr urb's */
634 usb_fill_int_urb(usb_pcwd->intr_urb, udev, pipe,
635 usb_pcwd->intr_buffer, usb_pcwd->intr_size,
636 usb_pcwd_intr_done, usb_pcwd, endpoint->bInterval);
637 usb_pcwd->intr_urb->transfer_dma = usb_pcwd->intr_dma;
638 usb_pcwd->intr_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
640 /* register our interrupt URB with the USB system */
641 if (usb_submit_urb(usb_pcwd->intr_urb, GFP_KERNEL)) {
642 printk(KERN_ERR PFX "Problem registering interrupt URB\n");
643 retval = -EIO; /* failure */
644 goto error;
647 /* The device exists and can be communicated with */
648 usb_pcwd->exists = 1;
650 /* disable card */
651 usb_pcwd_stop(usb_pcwd);
653 /* Get the Firmware Version */
654 got_fw_rev = usb_pcwd_send_command(usb_pcwd, CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor);
655 if (got_fw_rev) {
656 sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor);
657 } else {
658 sprintf(fw_ver_str, "<card no answer>");
661 printk(KERN_INFO PFX "Found card (Firmware: %s) with temp option\n",
662 fw_ver_str);
664 /* Get switch settings */
665 usb_pcwd_send_command(usb_pcwd, CMD_GET_DIP_SWITCH_SETTINGS, &dummy, &option_switches);
667 printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
668 option_switches,
669 ((option_switches & 0x10) ? "ON" : "OFF"),
670 ((option_switches & 0x08) ? "ON" : "OFF"));
672 /* Check that the heartbeat value is within it's range ; if not reset to the default */
673 if (usb_pcwd_set_heartbeat(usb_pcwd, heartbeat)) {
674 usb_pcwd_set_heartbeat(usb_pcwd, WATCHDOG_HEARTBEAT);
675 printk(KERN_INFO PFX "heartbeat value must be 0<heartbeat<65536, using %d\n",
676 WATCHDOG_HEARTBEAT);
679 retval = register_reboot_notifier(&usb_pcwd_notifier);
680 if (retval != 0) {
681 printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
682 retval);
683 goto error;
686 retval = misc_register(&usb_pcwd_temperature_miscdev);
687 if (retval != 0) {
688 printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
689 TEMP_MINOR, retval);
690 goto err_out_unregister_reboot;
693 retval = misc_register(&usb_pcwd_miscdev);
694 if (retval != 0) {
695 printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
696 WATCHDOG_MINOR, retval);
697 goto err_out_misc_deregister;
700 /* we can register the device now, as it is ready */
701 usb_set_intfdata (interface, usb_pcwd);
703 printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
704 heartbeat, nowayout);
706 return 0;
708 err_out_misc_deregister:
709 misc_deregister(&usb_pcwd_temperature_miscdev);
710 err_out_unregister_reboot:
711 unregister_reboot_notifier(&usb_pcwd_notifier);
712 error:
713 usb_pcwd_delete (usb_pcwd);
714 usb_pcwd_device = NULL;
715 return retval;
720 * usb_pcwd_disconnect
722 * Called by the usb core when the device is removed from the system.
724 * This routine guarantees that the driver will not submit any more urbs
725 * by clearing dev->udev.
727 static void usb_pcwd_disconnect(struct usb_interface *interface)
729 struct usb_pcwd_private *usb_pcwd;
731 /* prevent races with open() */
732 down (&disconnect_sem);
734 usb_pcwd = usb_get_intfdata (interface);
735 usb_set_intfdata (interface, NULL);
737 down (&usb_pcwd->sem);
739 /* Stop the timer before we leave */
740 if (!nowayout)
741 usb_pcwd_stop(usb_pcwd);
743 /* We should now stop communicating with the USB PCWD device */
744 usb_pcwd->exists = 0;
746 /* Deregister */
747 misc_deregister(&usb_pcwd_miscdev);
748 misc_deregister(&usb_pcwd_temperature_miscdev);
749 unregister_reboot_notifier(&usb_pcwd_notifier);
751 up (&usb_pcwd->sem);
753 /* Delete the USB PCWD device */
754 usb_pcwd_delete(usb_pcwd);
756 cards_found--;
758 up (&disconnect_sem);
760 printk(KERN_INFO PFX "USB PC Watchdog disconnected\n");
766 * usb_pcwd_init
768 static int __init usb_pcwd_init(void)
770 int result;
772 /* register this driver with the USB subsystem */
773 result = usb_register(&usb_pcwd_driver);
774 if (result) {
775 printk(KERN_ERR PFX "usb_register failed. Error number %d\n",
776 result);
777 return result;
780 printk(KERN_INFO PFX DRIVER_DESC " v" DRIVER_VERSION " (" DRIVER_DATE ")\n");
781 return 0;
786 * usb_pcwd_exit
788 static void __exit usb_pcwd_exit(void)
790 /* deregister this driver with the USB subsystem */
791 usb_deregister(&usb_pcwd_driver);
795 module_init (usb_pcwd_init);
796 module_exit (usb_pcwd_exit);