[TG3]: Set minimal hw interrupt mitigation.
[linux-2.6/verdex.git] / drivers / isdn / hisax / niccy.c
blobcf77d8360975dd07b999375ac0773ab050548ada
1 /* $Id: niccy.c,v 1.21.2.4 2004/01/13 23:48:39 keil Exp $
3 * low level stuff for Dr. Neuhaus NICCY PnP and NICCY PCI and
4 * compatible (SAGEM cybermodem)
6 * Author Karsten Keil
7 * Copyright by Karsten Keil <keil@isdn4linux.de>
8 *
9 * This software may be used and distributed according to the terms
10 * of the GNU General Public License, incorporated herein by reference.
12 * Thanks to Dr. Neuhaus and SAGEM for information
17 #include <linux/config.h>
18 #include <linux/init.h>
19 #include "hisax.h"
20 #include "isac.h"
21 #include "hscx.h"
22 #include "isdnl1.h"
23 #include <linux/pci.h>
24 #include <linux/isapnp.h>
26 extern const char *CardType[];
27 const char *niccy_revision = "$Revision: 1.21.2.4 $";
29 #define byteout(addr,val) outb(val,addr)
30 #define bytein(addr) inb(addr)
32 #define ISAC_PCI_DATA 0
33 #define HSCX_PCI_DATA 1
34 #define ISAC_PCI_ADDR 2
35 #define HSCX_PCI_ADDR 3
36 #define ISAC_PNP 0
37 #define HSCX_PNP 1
39 /* SUB Types */
40 #define NICCY_PNP 1
41 #define NICCY_PCI 2
43 /* PCI stuff */
44 #define PCI_IRQ_CTRL_REG 0x38
45 #define PCI_IRQ_ENABLE 0x1f00
46 #define PCI_IRQ_DISABLE 0xff0000
47 #define PCI_IRQ_ASSERT 0x800000
49 static inline u_char
50 readreg(unsigned int ale, unsigned int adr, u_char off)
52 register u_char ret;
54 byteout(ale, off);
55 ret = bytein(adr);
56 return (ret);
59 static inline void
60 readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
62 byteout(ale, off);
63 insb(adr, data, size);
67 static inline void
68 writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
70 byteout(ale, off);
71 byteout(adr, data);
74 static inline void
75 writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
77 byteout(ale, off);
78 outsb(adr, data, size);
81 /* Interface functions */
83 static u_char
84 ReadISAC(struct IsdnCardState *cs, u_char offset)
86 return (readreg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, offset));
89 static void
90 WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
92 writereg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, offset, value);
95 static void
96 ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
98 readfifo(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, 0, data, size);
101 static void
102 WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
104 writefifo(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, 0, data, size);
107 static u_char
108 ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
110 return (readreg(cs->hw.niccy.hscx_ale,
111 cs->hw.niccy.hscx, offset + (hscx ? 0x40 : 0)));
114 static void
115 WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
117 writereg(cs->hw.niccy.hscx_ale,
118 cs->hw.niccy.hscx, offset + (hscx ? 0x40 : 0), value);
121 #define READHSCX(cs, nr, reg) readreg(cs->hw.niccy.hscx_ale, \
122 cs->hw.niccy.hscx, reg + (nr ? 0x40 : 0))
123 #define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.niccy.hscx_ale, \
124 cs->hw.niccy.hscx, reg + (nr ? 0x40 : 0), data)
126 #define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.niccy.hscx_ale, \
127 cs->hw.niccy.hscx, (nr ? 0x40 : 0), ptr, cnt)
129 #define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.niccy.hscx_ale, \
130 cs->hw.niccy.hscx, (nr ? 0x40 : 0), ptr, cnt)
132 #include "hscx_irq.c"
134 static irqreturn_t
135 niccy_interrupt(int intno, void *dev_id, struct pt_regs *regs)
137 struct IsdnCardState *cs = dev_id;
138 u_char val;
139 u_long flags;
141 spin_lock_irqsave(&cs->lock, flags);
142 if (cs->subtyp == NICCY_PCI) {
143 int ival;
144 ival = inl(cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG);
145 if (!(ival & PCI_IRQ_ASSERT)) { /* IRQ not for us (shared) */
146 spin_unlock_irqrestore(&cs->lock, flags);
147 return IRQ_NONE;
149 outl(ival, cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG);
151 val = readreg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_ISTA + 0x40);
152 Start_HSCX:
153 if (val)
154 hscx_int_main(cs, val);
155 val = readreg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, ISAC_ISTA);
156 Start_ISAC:
157 if (val)
158 isac_interrupt(cs, val);
159 val = readreg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_ISTA + 0x40);
160 if (val) {
161 if (cs->debug & L1_DEB_HSCX)
162 debugl1(cs, "HSCX IntStat after IntRoutine");
163 goto Start_HSCX;
165 val = readreg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, ISAC_ISTA);
166 if (val) {
167 if (cs->debug & L1_DEB_ISAC)
168 debugl1(cs, "ISAC IntStat after IntRoutine");
169 goto Start_ISAC;
171 writereg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_MASK, 0xFF);
172 writereg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_MASK + 0x40, 0xFF);
173 writereg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, ISAC_MASK, 0xFF);
174 writereg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, ISAC_MASK, 0);
175 writereg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_MASK, 0);
176 writereg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_MASK + 0x40, 0);
177 spin_unlock_irqrestore(&cs->lock, flags);
178 return IRQ_HANDLED;
181 void
182 release_io_niccy(struct IsdnCardState *cs)
184 if (cs->subtyp == NICCY_PCI) {
185 int val;
187 val = inl(cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG);
188 val &= PCI_IRQ_DISABLE;
189 outl(val, cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG);
190 release_region(cs->hw.niccy.cfg_reg, 0x40);
191 release_region(cs->hw.niccy.isac, 4);
192 } else {
193 release_region(cs->hw.niccy.isac, 2);
194 release_region(cs->hw.niccy.isac_ale, 2);
198 static void
199 niccy_reset(struct IsdnCardState *cs)
201 if (cs->subtyp == NICCY_PCI) {
202 int val;
204 val = inl(cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG);
205 val |= PCI_IRQ_ENABLE;
206 outl(val, cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG);
208 inithscxisac(cs, 3);
211 static int
212 niccy_card_msg(struct IsdnCardState *cs, int mt, void *arg)
214 u_long flags;
216 switch (mt) {
217 case CARD_RESET:
218 spin_lock_irqsave(&cs->lock, flags);
219 niccy_reset(cs);
220 spin_unlock_irqrestore(&cs->lock, flags);
221 return(0);
222 case CARD_RELEASE:
223 release_io_niccy(cs);
224 return(0);
225 case CARD_INIT:
226 spin_lock_irqsave(&cs->lock, flags);
227 niccy_reset(cs);
228 spin_unlock_irqrestore(&cs->lock, flags);
229 return(0);
230 case CARD_TEST:
231 return(0);
233 return(0);
236 static struct pci_dev *niccy_dev __initdata = NULL;
237 #ifdef __ISAPNP__
238 static struct pnp_card *pnp_c __devinitdata = NULL;
239 #endif
241 int __init
242 setup_niccy(struct IsdnCard *card)
244 struct IsdnCardState *cs = card->cs;
245 char tmp[64];
247 strcpy(tmp, niccy_revision);
248 printk(KERN_INFO "HiSax: Niccy driver Rev. %s\n", HiSax_getrev(tmp));
249 if (cs->typ != ISDN_CTYPE_NICCY)
250 return (0);
251 #ifdef __ISAPNP__
252 if (!card->para[1] && isapnp_present()) {
253 struct pnp_dev *pnp_d = NULL;
254 int err;
256 if ((pnp_c = pnp_find_card(
257 ISAPNP_VENDOR('S', 'D', 'A'),
258 ISAPNP_FUNCTION(0x0150), pnp_c))) {
259 if (!(pnp_d = pnp_find_dev(pnp_c,
260 ISAPNP_VENDOR('S', 'D', 'A'),
261 ISAPNP_FUNCTION(0x0150), pnp_d))) {
262 printk(KERN_ERR "NiccyPnP: PnP error card found, no device\n");
263 return (0);
265 pnp_disable_dev(pnp_d);
266 err = pnp_activate_dev(pnp_d);
267 if (err<0) {
268 printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
269 __FUNCTION__, err);
270 return(0);
272 card->para[1] = pnp_port_start(pnp_d, 0);
273 card->para[2] = pnp_port_start(pnp_d, 1);
274 card->para[0] = pnp_irq(pnp_d, 0);
275 if (!card->para[0] || !card->para[1] || !card->para[2]) {
276 printk(KERN_ERR "NiccyPnP:some resources are missing %ld/%lx/%lx\n",
277 card->para[0], card->para[1], card->para[2]);
278 pnp_disable_dev(pnp_d);
279 return(0);
281 } else {
282 printk(KERN_INFO "NiccyPnP: no ISAPnP card found\n");
285 #endif
286 if (card->para[1]) {
287 cs->hw.niccy.isac = card->para[1] + ISAC_PNP;
288 cs->hw.niccy.hscx = card->para[1] + HSCX_PNP;
289 cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP;
290 cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP;
291 cs->hw.niccy.cfg_reg = 0;
292 cs->subtyp = NICCY_PNP;
293 cs->irq = card->para[0];
294 if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
295 printk(KERN_WARNING
296 "HiSax: %s data port %x-%x already in use\n",
297 CardType[card->typ],
298 cs->hw.niccy.isac,
299 cs->hw.niccy.isac + 1);
300 return (0);
302 if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
303 printk(KERN_WARNING
304 "HiSax: %s address port %x-%x already in use\n",
305 CardType[card->typ],
306 cs->hw.niccy.isac_ale,
307 cs->hw.niccy.isac_ale + 1);
308 release_region(cs->hw.niccy.isac, 2);
309 return (0);
311 } else {
312 #ifdef CONFIG_PCI
313 u_int pci_ioaddr;
314 cs->subtyp = 0;
315 if ((niccy_dev = pci_find_device(PCI_VENDOR_ID_SATSAGEM,
316 PCI_DEVICE_ID_SATSAGEM_NICCY, niccy_dev))) {
317 if (pci_enable_device(niccy_dev))
318 return(0);
319 /* get IRQ */
320 if (!niccy_dev->irq) {
321 printk(KERN_WARNING "Niccy: No IRQ for PCI card found\n");
322 return(0);
324 cs->irq = niccy_dev->irq;
325 cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0);
326 if (!cs->hw.niccy.cfg_reg) {
327 printk(KERN_WARNING "Niccy: No IO-Adr for PCI cfg found\n");
328 return(0);
330 pci_ioaddr = pci_resource_start(niccy_dev, 1);
331 if (!pci_ioaddr) {
332 printk(KERN_WARNING "Niccy: No IO-Adr for PCI card found\n");
333 return(0);
335 cs->subtyp = NICCY_PCI;
336 } else {
337 printk(KERN_WARNING "Niccy: No PCI card found\n");
338 return(0);
340 cs->irq_flags |= SA_SHIRQ;
341 cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA;
342 cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR;
343 cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA;
344 cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
345 if (!request_region(cs->hw.niccy.isac, 4, "niccy")) {
346 printk(KERN_WARNING
347 "HiSax: %s data port %x-%x already in use\n",
348 CardType[card->typ],
349 cs->hw.niccy.isac,
350 cs->hw.niccy.isac + 4);
351 return (0);
353 if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) {
354 printk(KERN_WARNING
355 "HiSax: %s pci port %x-%x already in use\n",
356 CardType[card->typ],
357 cs->hw.niccy.cfg_reg,
358 cs->hw.niccy.cfg_reg + 0x40);
359 release_region(cs->hw.niccy.isac, 4);
360 return (0);
362 #else
363 printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n");
364 printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n");
365 return (0);
366 #endif /* CONFIG_PCI */
368 printk(KERN_INFO "HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n",
369 CardType[cs->typ], (cs->subtyp==1) ? "PnP":"PCI",
370 cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
371 setup_isac(cs);
372 cs->readisac = &ReadISAC;
373 cs->writeisac = &WriteISAC;
374 cs->readisacfifo = &ReadISACfifo;
375 cs->writeisacfifo = &WriteISACfifo;
376 cs->BC_Read_Reg = &ReadHSCX;
377 cs->BC_Write_Reg = &WriteHSCX;
378 cs->BC_Send_Data = &hscx_fill_fifo;
379 cs->cardmsg = &niccy_card_msg;
380 cs->irq_func = &niccy_interrupt;
381 ISACVersion(cs, "Niccy:");
382 if (HscxVersion(cs, "Niccy:")) {
383 printk(KERN_WARNING
384 "Niccy: wrong HSCX versions check IO address\n");
385 release_io_niccy(cs);
386 return (0);
388 return (1);