[TG3]: Set minimal hw interrupt mitigation.
[linux-2.6/verdex.git] / drivers / media / radio / radio-gemtek.c
blob202bfe6819b887297c06492442de0dd4edacc8f6
1 /* GemTek radio card driver for Linux (C) 1998 Jonas Munsin <jmunsin@iki.fi>
3 * GemTek hasn't released any specs on the card, so the protocol had to
4 * be reverse engineered with dosemu.
6 * Besides the protocol changes, this is mostly a copy of:
8 * RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff
9 *
10 * Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood
11 * Converted to new API by Alan Cox <Alan.Cox@linux.org>
12 * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
14 * TODO: Allow for more than one of these foolish entities :-)
18 #include <linux/module.h> /* Modules */
19 #include <linux/init.h> /* Initdata */
20 #include <linux/ioport.h> /* check_region, request_region */
21 #include <linux/delay.h> /* udelay */
22 #include <asm/io.h> /* outb, outb_p */
23 #include <asm/uaccess.h> /* copy to/from user */
24 #include <linux/videodev.h> /* kernel radio structs */
25 #include <linux/config.h> /* CONFIG_RADIO_GEMTEK_PORT */
26 #include <linux/spinlock.h>
28 #ifndef CONFIG_RADIO_GEMTEK_PORT
29 #define CONFIG_RADIO_GEMTEK_PORT -1
30 #endif
32 static int io = CONFIG_RADIO_GEMTEK_PORT;
33 static int radio_nr = -1;
34 static spinlock_t lock;
36 struct gemtek_device
38 int port;
39 unsigned long curfreq;
40 int muted;
44 /* local things */
46 /* the correct way to mute the gemtek may be to write the last written
47 * frequency || 0x10, but just writing 0x10 once seems to do it as well
49 static void gemtek_mute(struct gemtek_device *dev)
51 if(dev->muted)
52 return;
53 spin_lock(&lock);
54 outb(0x10, io);
55 spin_unlock(&lock);
56 dev->muted = 1;
59 static void gemtek_unmute(struct gemtek_device *dev)
61 if(dev->muted == 0)
62 return;
63 spin_lock(&lock);
64 outb(0x20, io);
65 spin_unlock(&lock);
66 dev->muted = 0;
69 static void zero(void)
71 outb_p(0x04, io);
72 udelay(5);
73 outb_p(0x05, io);
74 udelay(5);
77 static void one(void)
79 outb_p(0x06, io);
80 udelay(5);
81 outb_p(0x07, io);
82 udelay(5);
85 static int gemtek_setfreq(struct gemtek_device *dev, unsigned long freq)
87 int i;
89 /* freq = 78.25*((float)freq/16000.0 + 10.52); */
91 freq /= 16;
92 freq += 10520;
93 freq *= 7825;
94 freq /= 100000;
96 spin_lock(&lock);
98 /* 2 start bits */
99 outb_p(0x03, io);
100 udelay(5);
101 outb_p(0x07, io);
102 udelay(5);
104 /* 28 frequency bits (lsb first) */
105 for (i = 0; i < 14; i++)
106 if (freq & (1 << i))
107 one();
108 else
109 zero();
110 /* 36 unknown bits */
111 for (i = 0; i < 11; i++)
112 zero();
113 one();
114 for (i = 0; i < 4; i++)
115 zero();
116 one();
117 zero();
119 /* 2 end bits */
120 outb_p(0x03, io);
121 udelay(5);
122 outb_p(0x07, io);
123 udelay(5);
125 spin_unlock(&lock);
127 return 0;
130 static int gemtek_getsigstr(struct gemtek_device *dev)
132 spin_lock(&lock);
133 inb(io);
134 udelay(5);
135 spin_unlock(&lock);
136 if (inb(io) & 8) /* bit set = no signal present */
137 return 0;
138 return 1; /* signal present */
141 static int gemtek_do_ioctl(struct inode *inode, struct file *file,
142 unsigned int cmd, void *arg)
144 struct video_device *dev = video_devdata(file);
145 struct gemtek_device *rt=dev->priv;
147 switch(cmd)
149 case VIDIOCGCAP:
151 struct video_capability *v = arg;
152 memset(v,0,sizeof(*v));
153 v->type=VID_TYPE_TUNER;
154 v->channels=1;
155 v->audios=1;
156 strcpy(v->name, "GemTek");
157 return 0;
159 case VIDIOCGTUNER:
161 struct video_tuner *v = arg;
162 if(v->tuner) /* Only 1 tuner */
163 return -EINVAL;
164 v->rangelow=87*16000;
165 v->rangehigh=108*16000;
166 v->flags=VIDEO_TUNER_LOW;
167 v->mode=VIDEO_MODE_AUTO;
168 v->signal=0xFFFF*gemtek_getsigstr(rt);
169 strcpy(v->name, "FM");
170 return 0;
172 case VIDIOCSTUNER:
174 struct video_tuner *v = arg;
175 if(v->tuner!=0)
176 return -EINVAL;
177 /* Only 1 tuner so no setting needed ! */
178 return 0;
180 case VIDIOCGFREQ:
182 unsigned long *freq = arg;
183 *freq = rt->curfreq;
184 return 0;
186 case VIDIOCSFREQ:
188 unsigned long *freq = arg;
189 rt->curfreq = *freq;
190 /* needs to be called twice in order for getsigstr to work */
191 gemtek_setfreq(rt, rt->curfreq);
192 gemtek_setfreq(rt, rt->curfreq);
193 return 0;
195 case VIDIOCGAUDIO:
197 struct video_audio *v = arg;
198 memset(v,0, sizeof(*v));
199 v->flags|=VIDEO_AUDIO_MUTABLE;
200 v->volume=1;
201 v->step=65535;
202 strcpy(v->name, "Radio");
203 return 0;
205 case VIDIOCSAUDIO:
207 struct video_audio *v = arg;
208 if(v->audio)
209 return -EINVAL;
211 if(v->flags&VIDEO_AUDIO_MUTE)
212 gemtek_mute(rt);
213 else
214 gemtek_unmute(rt);
216 return 0;
218 default:
219 return -ENOIOCTLCMD;
223 static int gemtek_ioctl(struct inode *inode, struct file *file,
224 unsigned int cmd, unsigned long arg)
226 return video_usercopy(inode, file, cmd, arg, gemtek_do_ioctl);
229 static struct gemtek_device gemtek_unit;
231 static struct file_operations gemtek_fops = {
232 .owner = THIS_MODULE,
233 .open = video_exclusive_open,
234 .release = video_exclusive_release,
235 .ioctl = gemtek_ioctl,
236 .llseek = no_llseek,
239 static struct video_device gemtek_radio=
241 .owner = THIS_MODULE,
242 .name = "GemTek radio",
243 .type = VID_TYPE_TUNER,
244 .hardware = VID_HARDWARE_GEMTEK,
245 .fops = &gemtek_fops,
248 static int __init gemtek_init(void)
250 if(io==-1)
252 printk(KERN_ERR "You must set an I/O address with io=0x20c, io=0x30c, io=0x24c or io=0x34c (io=0x020c or io=0x248 for the combined sound/radiocard)\n");
253 return -EINVAL;
256 if (!request_region(io, 4, "gemtek"))
258 printk(KERN_ERR "gemtek: port 0x%x already in use\n", io);
259 return -EBUSY;
262 gemtek_radio.priv=&gemtek_unit;
264 if(video_register_device(&gemtek_radio, VFL_TYPE_RADIO, radio_nr)==-1)
266 release_region(io, 4);
267 return -EINVAL;
269 printk(KERN_INFO "GemTek Radio Card driver.\n");
271 spin_lock_init(&lock);
273 /* this is _maybe_ unnecessary */
274 outb(0x01, io);
276 /* mute card - prevents noisy bootups */
277 gemtek_unit.muted = 0;
278 gemtek_mute(&gemtek_unit);
280 return 0;
283 MODULE_AUTHOR("Jonas Munsin");
284 MODULE_DESCRIPTION("A driver for the GemTek Radio Card");
285 MODULE_LICENSE("GPL");
287 module_param(io, int, 0);
288 MODULE_PARM_DESC(io, "I/O address of the GemTek card (0x20c, 0x30c, 0x24c or 0x34c (0x20c or 0x248 have been reported to work for the combined sound/radiocard)).");
289 module_param(radio_nr, int, 0);
291 static void __exit gemtek_cleanup(void)
293 video_unregister_device(&gemtek_radio);
294 release_region(io,4);
297 module_init(gemtek_init);
298 module_exit(gemtek_cleanup);
301 Local variables:
302 compile-command: "gcc -c -DMODVERSIONS -D__KERNEL__ -DMODULE -O6 -Wall -Wstrict-prototypes -I /home/blp/tmp/linux-2.1.111-rtrack/include radio-rtrack2.c"
303 End: