?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[TG3]: Set minimal hw interrupt mitigation.
[linux-2.6/verdex.git] / drivers / media / video / stradis.c
blobb57743571087b892d3a351f7c07d769d5976db90
1 /*
2 * stradis.c - stradis 4:2:2 mpeg decoder driver
3 *
4 * Stradis 4:2:2 MPEG-2 Decoder Driver
5 * Copyright (C) 1999 Nathan Laredo <laredo@gnu.org>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
21
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/errno.h>
25 #include <linux/fs.h>
26 #include <linux/kernel.h>
27 #include <linux/major.h>
28 #include <linux/slab.h>
29 #include <linux/mm.h>
30 #include <linux/init.h>
31 #include <linux/poll.h>
32 #include <linux/pci.h>
33 #include <linux/signal.h>
34 #include <asm/io.h>
35 #include <linux/ioport.h>
36 #include <asm/pgtable.h>
37 #include <asm/page.h>
38 #include <linux/sched.h>
39 #include <asm/types.h>
40 #include <linux/types.h>
41 #include <linux/interrupt.h>
42 #include <asm/uaccess.h>
43 #include <linux/vmalloc.h>
44 #include <linux/videodev.h>
45
46 #include "saa7146.h"
47 #include "saa7146reg.h"
48 #include "ibmmpeg2.h"
49 #include "saa7121.h"
50 #include "cs8420.h"
51
52 #define DEBUG(x) /* debug driver */
53 #undef IDEBUG /* debug irq handler */
54 #undef MDEBUG /* debug memory management */
55
56 #define SAA7146_MAX 6
57
58 static struct saa7146 saa7146s[SAA7146_MAX];
59
60 static int saa_num = 0; /* number of SAA7146s in use */
61
62 static int video_nr = -1;
63 module_param(video_nr, int, 0);
64 MODULE_LICENSE("GPL");
65
66
67 #define nDebNormal 0x00480000
68 #define nDebNoInc 0x00480000
69 #define nDebVideo 0xd0480000
70 #define nDebAudio 0xd0400000
71 #define nDebDMA 0x02c80000
72
73 #define oDebNormal 0x13c80000
74 #define oDebNoInc 0x13c80000
75 #define oDebVideo 0xd1080000
76 #define oDebAudio 0xd1080000
77 #define oDebDMA 0x03080000
78
79 #define NewCard (saa->boardcfg[3])
80 #define ChipControl (saa->boardcfg[1])
81 #define NTSCFirstActive (saa->boardcfg[4])
82 #define PALFirstActive (saa->boardcfg[5])
83 #define NTSCLastActive (saa->boardcfg[54])
84 #define PALLastActive (saa->boardcfg[55])
85 #define Have2MB (saa->boardcfg[18] & 0x40)
86 #define HaveCS8420 (saa->boardcfg[18] & 0x04)
87 #define IBMMPEGCD20 (saa->boardcfg[18] & 0x20)
88 #define HaveCS3310 (saa->boardcfg[18] & 0x01)
89 #define CS3310MaxLvl ((saa->boardcfg[30] << 8) | saa->boardcfg[31])
90 #define HaveCS4341 (saa->boardcfg[40] == 2)
91 #define SDIType (saa->boardcfg[27])
92 #define CurrentMode (saa->boardcfg[2])
93
94 #define debNormal (NewCard ? nDebNormal : oDebNormal)
95 #define debNoInc (NewCard ? nDebNoInc : oDebNoInc)
96 #define debVideo (NewCard ? nDebVideo : oDebVideo)
97 #define debAudio (NewCard ? nDebAudio : oDebAudio)
98 #define debDMA (NewCard ? nDebDMA : oDebDMA)
99
100 #ifdef USE_RESCUE_EEPROM_SDM275
101 static unsigned char rescue_eeprom[64] = {
102 0x00,0x01,0x04,0x13,0x26,0x0f,0x10,0x00,0x00,0x00,0x43,0x63,0x22,0x01,0x29,0x15,0x73,0x00,0x1f, 'd', 'e', 'c', 'x', 'l', 'd', 'v', 'a',0x02,0x00,0x01,0x00,0xcc,0xa4,0x63,0x09,0xe2,0x10,0x00,0x0a,0x00,0x02,0x02, 'd', 'e', 'c', 'x', 'l', 'a',0x00,0x00,0x42,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
103 };
104 #endif
105
106 /* ----------------------------------------------------------------------- */
107 /* Hardware I2C functions */
108 static void I2CWipe(struct saa7146 *saa)
109 {
110 int i;
111 /* set i2c to ~=100kHz, abort transfer, clear busy */
112 saawrite(0x600 | SAA7146_I2C_ABORT, SAA7146_I2C_STATUS);
113 saawrite((SAA7146_MC2_UPLD_I2C << 16) |
114 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
115 /* wait for i2c registers to be programmed */
116 for (i = 0; i < 1000 &&
117 !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
118 schedule();
119 saawrite(0x600, SAA7146_I2C_STATUS);
120 saawrite((SAA7146_MC2_UPLD_I2C << 16) |
121 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
122 /* wait for i2c registers to be programmed */
123 for (i = 0; i < 1000 &&
124 !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
125 schedule();
126 saawrite(0x600, SAA7146_I2C_STATUS);
127 saawrite((SAA7146_MC2_UPLD_I2C << 16) |
128 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
129 /* wait for i2c registers to be programmed */
130 for (i = 0; i < 1000 &&
131 !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
132 schedule();
133 }
134
135 /* read I2C */
136 static int I2CRead(struct saa7146 *saa, unsigned char addr,
137 unsigned char subaddr, int dosub)
138 {
139 int i;
140
141 if (saaread(SAA7146_I2C_STATUS) & 0x3c)
142 I2CWipe(saa);
143 for (i = 0; i < 1000 &&
144 (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++)
145 schedule();
146 if (i == 1000)
147 I2CWipe(saa);
148 if (dosub)
149 saawrite(((addr & 0xfe) << 24) | (((addr | 1) & 0xff) << 8) |
150 ((subaddr & 0xff) << 16) | 0xed, SAA7146_I2C_TRANSFER);
151 else
152 saawrite(((addr & 0xfe) << 24) | (((addr | 1) & 0xff) << 16) |
153 0xf1, SAA7146_I2C_TRANSFER);
154 saawrite((SAA7146_MC2_UPLD_I2C << 16) |
155 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
156 /* wait for i2c registers to be programmed */
157 for (i = 0; i < 1000 &&
158 !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
159 schedule();
160 /* wait for valid data */
161 for (i = 0; i < 1000 &&
162 (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++)
163 schedule();
164 if (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_ERR)
165 return -1;
166 if (i == 1000)
167 printk("i2c setup read timeout\n");
168 saawrite(0x41, SAA7146_I2C_TRANSFER);
169 saawrite((SAA7146_MC2_UPLD_I2C << 16) |
170 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
171 /* wait for i2c registers to be programmed */
172 for (i = 0; i < 1000 &&
173 !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
174 schedule();
175 /* wait for valid data */
176 for (i = 0; i < 1000 &&
177 (saaread(SAA7146_I2C_TRANSFER) & SAA7146_I2C_BUSY); i++)
178 schedule();
179 if (saaread(SAA7146_I2C_TRANSFER) & SAA7146_I2C_ERR)
180 return -1;
181 if (i == 1000)
182 printk("i2c read timeout\n");
183 return ((saaread(SAA7146_I2C_TRANSFER) >> 24) & 0xff);
184 }
185
186 /* set both to write both bytes, reset it to write only b1 */
187
188 static int I2CWrite(struct saa7146 *saa, unsigned char addr, unsigned char b1,
189 unsigned char b2, int both)
190 {
191 int i;
192 u32 data;
193
194 if (saaread(SAA7146_I2C_STATUS) & 0x3c)
195 I2CWipe(saa);
196 for (i = 0; i < 1000 &&
197 (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++)
198 schedule();
199 if (i == 1000)
200 I2CWipe(saa);
201 data = ((addr & 0xfe) << 24) | ((b1 & 0xff) << 16);
202 if (both)
203 data |= ((b2 & 0xff) << 8) | 0xe5;
204 else
205 data |= 0xd1;
206 saawrite(data, SAA7146_I2C_TRANSFER);
207 saawrite((SAA7146_MC2_UPLD_I2C << 16) | SAA7146_MC2_UPLD_I2C,
208 SAA7146_MC2);
209 return 0;
210 }
211
212 static void attach_inform(struct saa7146 *saa, int id)
213 {
214 int i;
215
216 DEBUG(printk(KERN_DEBUG "stradis%d: i2c: device found=%02x\n", saa->nr, id));
217 if (id == 0xa0) { /* we have rev2 or later board, fill in info */
218 for (i = 0; i < 64; i++)
219 saa->boardcfg[i] = I2CRead(saa, 0xa0, i, 1);
220 #ifdef USE_RESCUE_EEPROM_SDM275
221 if (saa->boardcfg[0] != 0) {
222 printk("stradis%d: WARNING: EEPROM STORED VALUES HAVE BEEN IGNORED\n", saa->nr);
223 for (i = 0; i < 64; i++)
224 saa->boardcfg[i] = rescue_eeprom[i];
225 }
226 #endif
227 printk("stradis%d: config =", saa->nr);
228 for (i = 0; i < 51; i++) {
229 printk(" %02x",saa->boardcfg[i]);
230 }
231 printk("\n");
232 }
233 }
234
235 static void I2CBusScan(struct saa7146 *saa)
236 {
237 int i;
238 for (i = 0; i < 0xff; i += 2)
239 if ((I2CRead(saa, i, 0, 0)) >= 0)
240 attach_inform(saa, i);
241 }
242
243 static int debiwait_maxwait = 0;
244
245 static int wait_for_debi_done(struct saa7146 *saa)
246 {
247 int i;
248
249 /* wait for registers to be programmed */
250 for (i = 0; i < 100000 &&
251 !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_DEBI); i++)
252 saaread(SAA7146_MC2);
253 /* wait for transfer to complete */
254 for (i = 0; i < 500000 &&
255 (saaread(SAA7146_PSR) & SAA7146_PSR_DEBI_S); i++)
256 saaread(SAA7146_MC2);
257 if (i > debiwait_maxwait)
258 printk("wait-for-debi-done maxwait: %d\n",
259 debiwait_maxwait = i);
260
261 if (i == 500000)
262 return -1;
263 return 0;
264 }
265
266 static int debiwrite(struct saa7146 *saa, u32 config, int addr,
267 u32 val, int count)
268 {
269 u32 cmd;
270 if (count <= 0 || count > 32764)
271 return -1;
272 if (wait_for_debi_done(saa) < 0)
273 return -1;
274 saawrite(config, SAA7146_DEBI_CONFIG);
275 if (count <= 4) /* immediate transfer */
276 saawrite(val, SAA7146_DEBI_AD);
277 else /* block transfer */
278 saawrite(virt_to_bus(saa->dmadebi), SAA7146_DEBI_AD);
279 saawrite((cmd = (count << 17) | (addr & 0xffff)), SAA7146_DEBI_COMMAND);
280 saawrite((SAA7146_MC2_UPLD_DEBI << 16) | SAA7146_MC2_UPLD_DEBI,
281 SAA7146_MC2);
282 return 0;
283 }
284
285 static u32 debiread(struct saa7146 *saa, u32 config, int addr, int count)
286 {
287 u32 result = 0;
288
289 if (count > 32764 || count <= 0)
290 return 0;
291 if (wait_for_debi_done(saa) < 0)
292 return 0;
293 saawrite(virt_to_bus(saa->dmadebi), SAA7146_DEBI_AD);
294 saawrite((count << 17) | 0x10000 | (addr & 0xffff),
295 SAA7146_DEBI_COMMAND);
296 saawrite(config, SAA7146_DEBI_CONFIG);
297 saawrite((SAA7146_MC2_UPLD_DEBI << 16) | SAA7146_MC2_UPLD_DEBI,
298 SAA7146_MC2);
299 if (count > 4) /* not an immediate transfer */
300 return count;
301 wait_for_debi_done(saa);
302 result = saaread(SAA7146_DEBI_AD);
303 if (count == 1)
304 result &= 0xff;
305 if (count == 2)
306 result &= 0xffff;
307 if (count == 3)
308 result &= 0xffffff;
309 return result;
310 }
311
312 #if 0 /* unused */
313 /* MUST be a multiple of 8 bytes and 8-byte aligned and < 32768 bytes */
314 /* data copied into saa->dmadebi buffer, caller must re-enable interrupts */
315 static void ibm_block_dram_read(struct saa7146 *saa, int address, int bytes)
316 {
317 int i, j;
318 u32 *buf;
319 buf = (u32 *) saa->dmadebi;
320 if (bytes > 0x7000)
321 bytes = 0x7000;
322 saawrite(0, SAA7146_IER); /* disable interrupts */
323 for (i=0; i < 10000 &&
324 (debiread(saa, debNormal, IBM_MP2_DRAM_CMD_STAT, 2)
325 & 0x8000); i++)
326 saaread(SAA7146_MC2);
327 if (i == 10000)
328 printk(KERN_ERR "stradis%d: dram_busy never cleared\n",
329 saa->nr);
330 debiwrite(saa, debNormal, IBM_MP2_SRC_ADDR, (address<<16) |
331 (address>>16), 4);
332 debiwrite(saa, debNormal, IBM_MP2_BLOCK_SIZE, bytes, 2);
333 debiwrite(saa, debNormal, IBM_MP2_CMD_STAT, 0x8a10, 2);
334 for (j = 0; j < bytes/4; j++) {
335 for (i = 0; i < 10000 &&
336 (!(debiread(saa, debNormal, IBM_MP2_DRAM_CMD_STAT, 2)
337 & 0x4000)); i++)
338 saaread(SAA7146_MC2);
339 if (i == 10000)
340 printk(KERN_ERR "stradis%d: dram_ready never set\n",
341 saa->nr);
342 buf[j] = debiread(saa, debNormal, IBM_MP2_DRAM_DATA, 4);
343 }
344 }
345 #endif /* unused */
346
347 static void do_irq_send_data(struct saa7146 *saa)
348 {
349 int split, audbytes, vidbytes;
350
351 saawrite(SAA7146_PSR_PIN1, SAA7146_IER);
352 /* if special feature mode in effect, disable audio sending */
353 if (saa->playmode != VID_PLAY_NORMAL)
354 saa->audtail = saa->audhead = 0;
355 if (saa->audhead <= saa->audtail)
356 audbytes = saa->audtail - saa->audhead;
357 else
358 audbytes = 65536 - (saa->audhead - saa->audtail);
359 if (saa->vidhead <= saa->vidtail)
360 vidbytes = saa->vidtail - saa->vidhead;
361 else
362 vidbytes = 524288 - (saa->vidhead - saa->vidtail);
363 if (audbytes == 0 && vidbytes == 0 && saa->osdtail == saa->osdhead) {
364 saawrite(0, SAA7146_IER);
365 return;
366 }
367 /* if at least 1 block audio waiting and audio fifo isn't full */
368 if (audbytes >= 2048 && (debiread(saa, debNormal,
369 IBM_MP2_AUD_FIFO, 2) & 0xff) < 60) {
370 if (saa->audhead > saa->audtail)
371 split = 65536 - saa->audhead;
372 else
373 split = 0;
374 audbytes = 2048;
375 if (split > 0 && split < 2048) {
376 memcpy(saa->dmadebi, saa->audbuf + saa->audhead,
377 split);
378 saa->audhead = 0;
379 audbytes -= split;
380 } else
381 split = 0;
382 memcpy(saa->dmadebi + split, saa->audbuf + saa->audhead,
383 audbytes);
384 saa->audhead += audbytes;
385 saa->audhead &= 0xffff;
386 debiwrite(saa, debAudio, (NewCard? IBM_MP2_AUD_FIFO :
387 IBM_MP2_AUD_FIFOW), 0, 2048);
388 wake_up_interruptible(&saa->audq);
389 /* if at least 1 block video waiting and video fifo isn't full */
390 } else if (vidbytes >= 30720 && (debiread(saa, debNormal,
391 IBM_MP2_FIFO, 2)) < 16384) {
392 if (saa->vidhead > saa->vidtail)
393 split = 524288 - saa->vidhead;
394 else
395 split = 0;
396 vidbytes = 30720;
397 if (split > 0 && split < 30720) {
398 memcpy(saa->dmadebi, saa->vidbuf + saa->vidhead,
399 split);
400 saa->vidhead = 0;
401 vidbytes -= split;
402 } else
403 split = 0;
404 memcpy(saa->dmadebi + split, saa->vidbuf + saa->vidhead,
405 vidbytes);
406 saa->vidhead += vidbytes;
407 saa->vidhead &= 0x7ffff;
408 debiwrite(saa, debVideo, (NewCard ? IBM_MP2_FIFO :
409 IBM_MP2_FIFOW), 0, 30720);
410 wake_up_interruptible(&saa->vidq);
411 }
412 saawrite(SAA7146_PSR_DEBI_S | SAA7146_PSR_PIN1, SAA7146_IER);
413 }
414
415 static void send_osd_data(struct saa7146 *saa)
416 {
417 int size = saa->osdtail - saa->osdhead;
418 if (size > 30720)
419 size = 30720;
420 /* ensure some multiple of 8 bytes is transferred */
421 size = 8 * ((size + 8)>>3);
422 if (size) {
423 debiwrite(saa, debNormal, IBM_MP2_OSD_ADDR,
424 (saa->osdhead>>3), 2);
425 memcpy(saa->dmadebi, &saa->osdbuf[saa->osdhead], size);
426 saa->osdhead += size;
427 /* block transfer of next 8 bytes to ~32k bytes */
428 debiwrite(saa, debNormal, IBM_MP2_OSD_DATA, 0, size);
429 }
430 if (saa->osdhead >= saa->osdtail) {
431 saa->osdhead = saa->osdtail = 0;
432 debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2);
433 }
434 }
435
436 static irqreturn_t saa7146_irq(int irq, void *dev_id, struct pt_regs *regs)
437 {
438 struct saa7146 *saa = (struct saa7146 *) dev_id;
439 u32 stat, astat;
440 int count;
441 int handled = 0;
442
443 count = 0;
444 while (1) {
445 /* get/clear interrupt status bits */
446 stat = saaread(SAA7146_ISR);
447 astat = stat & saaread(SAA7146_IER);
448 if (!astat)
449 break;
450 handled = 1;
451 saawrite(astat, SAA7146_ISR);
452 if (astat & SAA7146_PSR_DEBI_S) {
453 do_irq_send_data(saa);
454 }
455 if (astat & SAA7146_PSR_PIN1) {
456 int istat;
457 /* the following read will trigger DEBI_S */
458 istat = debiread(saa, debNormal, IBM_MP2_HOST_INT, 2);
459 if (istat & 1) {
460 saawrite(0, SAA7146_IER);
461 send_osd_data(saa);
462 saawrite(SAA7146_PSR_DEBI_S |
463 SAA7146_PSR_PIN1, SAA7146_IER);
464 }
465 if (istat & 0x20) { /* Video Start */
466 saa->vidinfo.frame_count++;
467 }
468 if (istat & 0x400) { /* Picture Start */
469 /* update temporal reference */
470 }
471 if (istat & 0x200) { /* Picture Resolution Change */
472 /* read new resolution */
473 }
474 if (istat & 0x100) { /* New User Data found */
475 /* read new user data */
476 }
477 if (istat & 0x1000) { /* new GOP/SMPTE */
478 /* read new SMPTE */
479 }
480 if (istat & 0x8000) { /* Sequence Start Code */
481 /* reset frame counter, load sizes */
482 saa->vidinfo.frame_count = 0;
483 saa->vidinfo.h_size = 704;
484 saa->vidinfo.v_size = 480;
485 #if 0
486 if (saa->endmarkhead != saa->endmarktail) {
487 saa->audhead =
488 saa->endmark[saa->endmarkhead];
489 saa->endmarkhead++;
490 if (saa->endmarkhead >= MAX_MARKS)
491 saa->endmarkhead = 0;
492 }
493 #endif
494 }
495 if (istat & 0x4000) { /* Sequence Error Code */
496 if (saa->endmarkhead != saa->endmarktail) {
497 saa->audhead =
498 saa->endmark[saa->endmarkhead];
499 saa->endmarkhead++;
500 if (saa->endmarkhead >= MAX_MARKS)
501 saa->endmarkhead = 0;
502 }
503 }
504 }
505 #ifdef IDEBUG
506 if (astat & SAA7146_PSR_PPEF) {
507 IDEBUG(printk("stradis%d irq: PPEF\n", saa->nr));
508 }
509 if (astat & SAA7146_PSR_PABO) {
510 IDEBUG(printk("stradis%d irq: PABO\n", saa->nr));
511 }
512 if (astat & SAA7146_PSR_PPED) {
513 IDEBUG(printk("stradis%d irq: PPED\n", saa->nr));
514 }
515 if (astat & SAA7146_PSR_RPS_I1) {
516 IDEBUG(printk("stradis%d irq: RPS_I1\n", saa->nr));
517 }
518 if (astat & SAA7146_PSR_RPS_I0) {
519 IDEBUG(printk("stradis%d irq: RPS_I0\n", saa->nr));
520 }
521 if (astat & SAA7146_PSR_RPS_LATE1) {
522 IDEBUG(printk("stradis%d irq: RPS_LATE1\n", saa->nr));
523 }
524 if (astat & SAA7146_PSR_RPS_LATE0) {
525 IDEBUG(printk("stradis%d irq: RPS_LATE0\n", saa->nr));
526 }
527 if (astat & SAA7146_PSR_RPS_E1) {
528 IDEBUG(printk("stradis%d irq: RPS_E1\n", saa->nr));
529 }
530 if (astat & SAA7146_PSR_RPS_E0) {
531 IDEBUG(printk("stradis%d irq: RPS_E0\n", saa->nr));
532 }
533 if (astat & SAA7146_PSR_RPS_TO1) {
534 IDEBUG(printk("stradis%d irq: RPS_TO1\n", saa->nr));
535 }
536 if (astat & SAA7146_PSR_RPS_TO0) {
537 IDEBUG(printk("stradis%d irq: RPS_TO0\n", saa->nr));
538 }
539 if (astat & SAA7146_PSR_UPLD) {
540 IDEBUG(printk("stradis%d irq: UPLD\n", saa->nr));
541 }
542 if (astat & SAA7146_PSR_DEBI_E) {
543 IDEBUG(printk("stradis%d irq: DEBI_E\n", saa->nr));
544 }
545 if (astat & SAA7146_PSR_I2C_S) {
546 IDEBUG(printk("stradis%d irq: I2C_S\n", saa->nr));
547 }
548 if (astat & SAA7146_PSR_I2C_E) {
549 IDEBUG(printk("stradis%d irq: I2C_E\n", saa->nr));
550 }
551 if (astat & SAA7146_PSR_A2_IN) {
552 IDEBUG(printk("stradis%d irq: A2_IN\n", saa->nr));
553 }
554 if (astat & SAA7146_PSR_A2_OUT) {
555 IDEBUG(printk("stradis%d irq: A2_OUT\n", saa->nr));
556 }
557 if (astat & SAA7146_PSR_A1_IN) {
558 IDEBUG(printk("stradis%d irq: A1_IN\n", saa->nr));
559 }
560 if (astat & SAA7146_PSR_A1_OUT) {
561 IDEBUG(printk("stradis%d irq: A1_OUT\n", saa->nr));
562 }
563 if (astat & SAA7146_PSR_AFOU) {
564 IDEBUG(printk("stradis%d irq: AFOU\n", saa->nr));
565 }
566 if (astat & SAA7146_PSR_V_PE) {
567 IDEBUG(printk("stradis%d irq: V_PE\n", saa->nr));
568 }
569 if (astat & SAA7146_PSR_VFOU) {
570 IDEBUG(printk("stradis%d irq: VFOU\n", saa->nr));
571 }
572 if (astat & SAA7146_PSR_FIDA) {
573 IDEBUG(printk("stradis%d irq: FIDA\n", saa->nr));
574 }
575 if (astat & SAA7146_PSR_FIDB) {
576 IDEBUG(printk("stradis%d irq: FIDB\n", saa->nr));
577 }
578 if (astat & SAA7146_PSR_PIN3) {
579 IDEBUG(printk("stradis%d irq: PIN3\n", saa->nr));
580 }
581 if (astat & SAA7146_PSR_PIN2) {
582 IDEBUG(printk("stradis%d irq: PIN2\n", saa->nr));
583 }
584 if (astat & SAA7146_PSR_PIN0) {
585 IDEBUG(printk("stradis%d irq: PIN0\n", saa->nr));
586 }
587 if (astat & SAA7146_PSR_ECS) {
588 IDEBUG(printk("stradis%d irq: ECS\n", saa->nr));
589 }
590 if (astat & SAA7146_PSR_EC3S) {
591 IDEBUG(printk("stradis%d irq: EC3S\n", saa->nr));
592 }
593 if (astat & SAA7146_PSR_EC0S) {
594 IDEBUG(printk("stradis%d irq: EC0S\n", saa->nr));
595 }
596 #endif
597 count++;
598 if (count > 15)
599 printk(KERN_WARNING "stradis%d: irq loop %d\n",
600 saa->nr, count);
601 if (count > 20) {
602 saawrite(0, SAA7146_IER);
603 printk(KERN_ERR
604 "stradis%d: IRQ loop cleared\n", saa->nr);
605 }
606 }
607 return IRQ_RETVAL(handled);
608 }
609
610 static int ibm_send_command(struct saa7146 *saa,
611 int command, int data, int chain)
612 {
613 int i;
614
615 if (chain)
616 debiwrite(saa, debNormal, IBM_MP2_COMMAND, (command << 1) | 1, 2);
617 else
618 debiwrite(saa, debNormal, IBM_MP2_COMMAND, command << 1, 2);
619 debiwrite(saa, debNormal, IBM_MP2_CMD_DATA, data, 2);
620 debiwrite(saa, debNormal, IBM_MP2_CMD_STAT, 1, 2);
621 for (i = 0; i < 100 &&
622 (debiread(saa, debNormal, IBM_MP2_CMD_STAT, 2) & 1); i++)
623 schedule();
624 if (i == 100)
625 return -1;
626 return 0;
627 }
628
629 static void cs4341_setlevel(struct saa7146 *saa, int left, int right)
630 {
631 I2CWrite(saa, 0x22, 0x03, left > 94 ? 94 : left, 2);
632 I2CWrite(saa, 0x22, 0x04, right > 94 ? 94 : right, 2);
633 }
634
635 static void initialize_cs4341(struct saa7146 *saa)
636 {
637 int i;
638 for (i = 0; i < 200; i++) {
639 /* auto mute off, power on, no de-emphasis */
640 /* I2S data up to 24-bit 64xFs internal SCLK */
641 I2CWrite(saa, 0x22, 0x01, 0x11, 2);
642 /* ATAPI mixer settings */
643 I2CWrite(saa, 0x22, 0x02, 0x49, 2);
644 /* attenuation left 3db */
645 I2CWrite(saa, 0x22, 0x03, 0x00, 2);
646 /* attenuation right 3db */
647 I2CWrite(saa, 0x22, 0x04, 0x00, 2);
648 I2CWrite(saa, 0x22, 0x01, 0x10, 2);
649 if (I2CRead(saa, 0x22, 0x02, 1) == 0x49)
650 break;
651 schedule();
652 }
653 printk("stradis%d: CS4341 initialized (%d)\n", saa->nr, i);
654 return;
655 }
656
657 static void initialize_cs8420(struct saa7146 *saa, int pro)
658 {
659 int i;
660 u8 *sequence;
661 if (pro)
662 sequence = mode8420pro;
663 else
664 sequence = mode8420con;
665 for (i = 0; i < INIT8420LEN; i++)
666 I2CWrite(saa, 0x20, init8420[i * 2],
667 init8420[i * 2 + 1], 2);
668 for (i = 0; i < MODE8420LEN; i++)
669 I2CWrite(saa, 0x20, sequence[i * 2],
670 sequence[i * 2 + 1], 2);
671 printk("stradis%d: CS8420 initialized\n", saa->nr);
672 }
673
674 static void initialize_saa7121(struct saa7146 *saa, int dopal)
675 {
676 int i, mod;
677 u8 *sequence;
678 if (dopal)
679 sequence = init7121pal;
680 else
681 sequence = init7121ntsc;
682 mod = saaread(SAA7146_PSR) & 0x08;
683 /* initialize PAL/NTSC video encoder */
684 for (i = 0; i < INIT7121LEN; i++) {
685 if (NewCard) { /* handle new card encoder differences */
686 if (sequence[i*2] == 0x3a)
687 I2CWrite(saa, 0x88, 0x3a, 0x13, 2);
688 else if (sequence[i*2] == 0x6b)
689 I2CWrite(saa, 0x88, 0x6b, 0x20, 2);
690 else if (sequence[i*2] == 0x6c)
691 I2CWrite(saa, 0x88, 0x6c,
692 dopal ? 0x09 : 0xf5, 2);
693 else if (sequence[i*2] == 0x6d)
694 I2CWrite(saa, 0x88, 0x6d,
695 dopal ? 0x20 : 0x00, 2);
696 else if (sequence[i*2] == 0x7a)
697 I2CWrite(saa, 0x88, 0x7a,
698 dopal ? (PALFirstActive - 1) :
699 (NTSCFirstActive - 4), 2);
700 else if (sequence[i*2] == 0x7b)
701 I2CWrite(saa, 0x88, 0x7b,
702 dopal ? PALLastActive :
703 NTSCLastActive, 2);
704 else I2CWrite(saa, 0x88, sequence[i * 2],
705 sequence[i * 2 + 1], 2);
706 } else {
707 if (sequence[i*2] == 0x6b && mod)
708 I2CWrite(saa, 0x88, 0x6b,
709 (sequence[i * 2 + 1] ^ 0x09), 2);
710 else if (sequence[i*2] == 0x7a)
711 I2CWrite(saa, 0x88, 0x7a,
712 dopal ? (PALFirstActive - 1) :
713 (NTSCFirstActive - 4), 2);
714 else if (sequence[i*2] == 0x7b)
715 I2CWrite(saa, 0x88, 0x7b,
716 dopal ? PALLastActive :
717 NTSCLastActive, 2);
718 else
719 I2CWrite(saa, 0x88, sequence[i * 2],
720 sequence[i * 2 + 1], 2);
721 }
722 }
723 }
724
725 static void set_genlock_offset(struct saa7146 *saa, int noffset)
726 {
727 int nCode;
728 int PixelsPerLine = 858;
729 if (CurrentMode == VIDEO_MODE_PAL)
730 PixelsPerLine = 864;
731 if (noffset > 500)
732 noffset = 500;
733 else if (noffset < -500)
734 noffset = -500;
735 nCode = noffset + 0x100;
736 if (nCode == 1)
737 nCode = 0x401;
738 else if (nCode < 1) nCode = 0x400 + PixelsPerLine + nCode;
739 debiwrite(saa, debNormal, XILINX_GLDELAY, nCode, 2);
740 }
741
742 static void set_out_format(struct saa7146 *saa, int mode)
743 {
744 initialize_saa7121(saa, (mode == VIDEO_MODE_NTSC ? 0 : 1));
745 saa->boardcfg[2] = mode;
746 /* do not adjust analog video parameters here, use saa7121 init */
747 /* you will affect the SDI output on the new card */
748 if (mode == VIDEO_MODE_PAL) { /* PAL */
749 debiwrite(saa, debNormal, XILINX_CTL0, 0x0808, 2);
750 mdelay(50);
751 saawrite(0x012002c0, SAA7146_NUM_LINE_BYTE1);
752 if (NewCard) {
753 debiwrite(saa, debNormal, IBM_MP2_DISP_MODE,
754 0xe100, 2);
755 mdelay(50);
756 }
757 debiwrite(saa, debNormal, IBM_MP2_DISP_MODE,
758 NewCard ? 0xe500: 0x6500, 2);
759 debiwrite(saa, debNormal, IBM_MP2_DISP_DLY,
760 (1 << 8) |
761 (NewCard ? PALFirstActive : PALFirstActive-6), 2);
762 } else { /* NTSC */
763 debiwrite(saa, debNormal, XILINX_CTL0, 0x0800, 2);
764 mdelay(50);
765 saawrite(0x00f002c0, SAA7146_NUM_LINE_BYTE1);
766 debiwrite(saa, debNormal, IBM_MP2_DISP_MODE,
767 NewCard ? 0xe100: 0x6100, 2);
768 debiwrite(saa, debNormal, IBM_MP2_DISP_DLY,
769 (1 << 8) |
770 (NewCard ? NTSCFirstActive : NTSCFirstActive-6), 2);
771 }
772 }
773
774
775 /* Intialize bitmangler to map from a byte value to the mangled word that
776 * must be output to program the Xilinx part through the DEBI port.
777 * Xilinx Data Bit->DEBI Bit: 0->15 1->7 2->6 3->12 4->11 5->2 6->1 7->0
778 * transfer FPGA code, init IBM chip, transfer IBM microcode
779 * rev2 card mangles: 0->7 1->6 2->5 3->4 4->3 5->2 6->1 7->0
780 */
781 static u16 bitmangler[256];
782
783 static int initialize_fpga(struct video_code *bitdata)
784 {
785 int i, num, startindex, failure = 0, loadtwo, loadfile = 0;
786 u16 *dmabuf;
787 u8 *newdma;
788 struct saa7146 *saa;
789
790 /* verify fpga code */
791 for (startindex = 0; startindex < bitdata->datasize; startindex++)
792 if (bitdata->data[startindex] == 255)
793 break;
794 if (startindex == bitdata->datasize) {
795 printk(KERN_INFO "stradis: bad fpga code\n");
796 return -1;
797 }
798 /* initialize all detected cards */
799 for (num = 0; num < saa_num; num++) {
800 saa = &saa7146s[num];
801 if (saa->boardcfg[0] > 20)
802 continue; /* card was programmed */
803 loadtwo = (saa->boardcfg[18] & 0x10);
804 if (!NewCard) /* we have an old board */
805 for (i = 0; i < 256; i++)
806 bitmangler[i] = ((i & 0x01) << 15) |
807 ((i & 0x02) << 6) | ((i & 0x04) << 4) |
808 ((i & 0x08) << 9) | ((i & 0x10) << 7) |
809 ((i & 0x20) >> 3) | ((i & 0x40) >> 5) |
810 ((i & 0x80) >> 7);
811 else /* else we have a new board */
812 for (i = 0; i < 256; i++)
813 bitmangler[i] = ((i & 0x01) << 7) |
814 ((i & 0x02) << 5) | ((i & 0x04) << 3) |
815 ((i & 0x08) << 1) | ((i & 0x10) >> 1) |
816 ((i & 0x20) >> 3) | ((i & 0x40) >> 5) |
817 ((i & 0x80) >> 7);
818
819 dmabuf = (u16 *) saa->dmadebi;
820 newdma = (u8 *) saa->dmadebi;
821 if (NewCard) { /* SDM2xxx */
822 if (!strncmp(bitdata->loadwhat, "decoder2", 8))
823 continue; /* fpga not for this card */
824 if (!strncmp(&saa->boardcfg[42],
825 bitdata->loadwhat, 8)) {
826 loadfile = 1;
827 } else if (loadtwo && !strncmp(&saa->boardcfg[19],
828 bitdata->loadwhat, 8)) {
829 loadfile = 2;
830 } else if (!saa->boardcfg[42] && /* special */
831 !strncmp("decxl", bitdata->loadwhat, 8)) {
832 loadfile = 1;
833 } else
834 continue; /* fpga not for this card */
835 if (loadfile != 1 && loadfile != 2) {
836 continue; /* skip to next card */
837 }
838 if (saa->boardcfg[0] && loadfile == 1 )
839 continue; /* skip to next card */
840 if (saa->boardcfg[0] != 1 && loadfile == 2)
841 continue; /* skip to next card */
842 saa->boardcfg[0]++; /* mark fpga handled */
843 printk("stradis%d: loading %s\n", saa->nr,
844 bitdata->loadwhat);
845 if (loadtwo && loadfile == 2)
846 goto send_fpga_stuff;
847 /* turn on the Audio interface to set PROG low */
848 saawrite(0x00400040, SAA7146_GPIO_CTRL);
849 saaread(SAA7146_PSR); /* ensure posted write */
850 /* wait for everyone to reset */
851 mdelay(10);
852 saawrite(0x00400000, SAA7146_GPIO_CTRL);
853 } else { /* original card */
854 if (strncmp(bitdata->loadwhat, "decoder2", 8))
855 continue; /* fpga not for this card */
856 /* Pull the Xilinx PROG signal WS3 low */
857 saawrite(0x02000200, SAA7146_MC1);
858 /* Turn on the Audio interface so can set PROG low */
859 saawrite(0x000000c0, SAA7146_ACON1);
860 /* Pull the Xilinx INIT signal (GPIO2) low */
861 saawrite(0x00400000, SAA7146_GPIO_CTRL);
862 /* Make sure everybody resets */
863 saaread(SAA7146_PSR); /* ensure posted write */
864 mdelay(10);
865 /* Release the Xilinx PROG signal */
866 saawrite(0x00000000, SAA7146_ACON1);
867 /* Turn off the Audio interface */
868 saawrite(0x02000000, SAA7146_MC1);
869 }
870 /* Release Xilinx INIT signal (WS2) */
871 saawrite(0x00000000, SAA7146_GPIO_CTRL);
872 /* Wait for the INIT to go High */
873 for (i = 0; i < 10000 &&
874 !(saaread(SAA7146_PSR) & SAA7146_PSR_PIN2); i++)
875 schedule();
876 if (i == 1000) {
877 printk(KERN_INFO "stradis%d: no fpga INIT\n", saa->nr);
878 return -1;
879 }
880 send_fpga_stuff:
881 if (NewCard) {
882 for (i = startindex; i < bitdata->datasize; i++)
883 newdma[i - startindex] =
884 bitmangler[bitdata->data[i]];
885 debiwrite(saa, 0x01420000, 0, 0,
886 ((bitdata->datasize - startindex) + 5));
887 if (loadtwo) {
888 if (loadfile == 1) {
889 printk("stradis%d: "
890 "awaiting 2nd FPGA bitfile\n",
891 saa->nr);
892 continue; /* skip to next card */
893 }
894
895 }
896 } else {
897 for (i = startindex; i < bitdata->datasize; i++)
898 dmabuf[i - startindex] =
899 bitmangler[bitdata->data[i]];
900 debiwrite(saa, 0x014a0000, 0, 0,
901 ((bitdata->datasize - startindex) + 5) * 2);
902 }
903 for (i = 0; i < 1000 &&
904 !(saaread(SAA7146_PSR) & SAA7146_PSR_PIN2); i++)
905 schedule();
906 if (i == 1000) {
907 printk(KERN_INFO "stradis%d: FPGA load failed\n",
908 saa->nr);
909 failure++;
910 continue;
911 }
912 if (!NewCard) {
913 /* Pull the Xilinx INIT signal (GPIO2) low */
914 saawrite(0x00400000, SAA7146_GPIO_CTRL);
915 saaread(SAA7146_PSR); /* ensure posted write */
916 mdelay(2);
917 saawrite(0x00000000, SAA7146_GPIO_CTRL);
918 mdelay(2);
919 }
920 printk(KERN_INFO "stradis%d: FPGA Loaded\n", saa->nr);
921 saa->boardcfg[0] = 26; /* mark fpga programmed */
922 /* set VXCO to its lowest frequency */
923 debiwrite(saa, debNormal, XILINX_PWM, 0, 2);
924 if (NewCard) {
925 /* mute CS3310 */
926 if (HaveCS3310)
927 debiwrite(saa, debNormal, XILINX_CS3310_CMPLT,
928 0, 2);
929 /* set VXCO to PWM mode, release reset, blank on */
930 debiwrite(saa, debNormal, XILINX_CTL0, 0xffc4, 2);
931 mdelay(10);
932 /* unmute CS3310 */
933 if (HaveCS3310)
934 debiwrite(saa, debNormal, XILINX_CTL0,
935 0x2020, 2);
936 }
937 /* set source Black */
938 debiwrite(saa, debNormal, XILINX_CTL0, 0x1707, 2);
939 saa->boardcfg[4] = 22; /* set NTSC First Active Line */
940 saa->boardcfg[5] = 23; /* set PAL First Active Line */
941 saa->boardcfg[54] = 2; /* set NTSC Last Active Line - 256 */
942 saa->boardcfg[55] = 54; /* set PAL Last Active Line - 256 */
943 set_out_format(saa, VIDEO_MODE_NTSC);
944 mdelay(50);
945 /* begin IBM chip init */
946 debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 4, 2);
947 saaread(SAA7146_PSR); /* wait for reset */
948 mdelay(5);
949 debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0, 2);
950 debiread(saa, debNormal, IBM_MP2_CHIP_CONTROL, 2);
951 debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0x10, 2);
952 debiwrite(saa, debNormal, IBM_MP2_CMD_ADDR, 0, 2);
953 debiwrite(saa, debNormal, IBM_MP2_CHIP_MODE, 0x2e, 2);
954 if (NewCard) {
955 mdelay(5);
956 /* set i2s rate converter to 48KHz */
957 debiwrite(saa, debNormal, 0x80c0, 6, 2);
958 /* we must init CS8420 first since rev b pulls i2s */
959 /* master clock low and CS4341 needs i2s master to */
960 /* run the i2c port. */
961 if (HaveCS8420) {
962 /* 0=consumer, 1=pro */
963 initialize_cs8420(saa, 0);
964 }
965 mdelay(5);
966 if (HaveCS4341)
967 initialize_cs4341(saa);
968 }
969 debiwrite(saa, debNormal, IBM_MP2_INFC_CTL, 0x48, 2);
970 debiwrite(saa, debNormal, IBM_MP2_BEEP_CTL, 0xa000, 2);
971 debiwrite(saa, debNormal, IBM_MP2_DISP_LBOR, 0, 2);
972 debiwrite(saa, debNormal, IBM_MP2_DISP_TBOR, 0, 2);
973 if (NewCard)
974 set_genlock_offset(saa, 0);
975 debiwrite(saa, debNormal, IBM_MP2_FRNT_ATTEN, 0, 2);
976 #if 0
977 /* enable genlock */
978 debiwrite(saa, debNormal, XILINX_CTL0, 0x8000, 2);
979 #else
980 /* disable genlock */
981 debiwrite(saa, debNormal, XILINX_CTL0, 0x8080, 2);
982 #endif
983 }
984 return failure;
985 }
986
987 static int do_ibm_reset(struct saa7146 *saa)
988 {
989 /* failure if decoder not previously programmed */
990 if (saa->boardcfg[0] < 37)
991 return -EIO;
992 /* mute CS3310 */
993 if (HaveCS3310)
994 debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, 0, 2);
995 /* disable interrupts */
996 saawrite(0, SAA7146_IER);
997 saa->audhead = saa->audtail = 0;
998 saa->vidhead = saa->vidtail = 0;
999 /* tristate debi bus, disable debi transfers */
1000 saawrite(0x00880000, SAA7146_MC1);
1001 /* ensure posted write */
1002 saaread(SAA7146_MC1);
1003 mdelay(50);
1004 /* re-enable debi transfers */
1005 saawrite(0x00880088, SAA7146_MC1);
1006 /* set source Black */
1007 debiwrite(saa, debNormal, XILINX_CTL0, 0x1707, 2);
1008 /* begin IBM chip init */
1009 set_out_format(saa, CurrentMode);
1010 debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 4, 2);
1011 saaread(SAA7146_PSR); /* wait for reset */
1012 mdelay(5);
1013 debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0, 2);
1014 debiread(saa, debNormal, IBM_MP2_CHIP_CONTROL, 2);
1015 debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, ChipControl, 2);
1016 debiwrite(saa, debNormal, IBM_MP2_CHIP_MODE, 0x2e, 2);
1017 if (NewCard) {
1018 mdelay(5);
1019 /* set i2s rate converter to 48KHz */
1020 debiwrite(saa, debNormal, 0x80c0, 6, 2);
1021 /* we must init CS8420 first since rev b pulls i2s */
1022 /* master clock low and CS4341 needs i2s master to */
1023 /* run the i2c port. */
1024 if (HaveCS8420) {
1025 /* 0=consumer, 1=pro */
1026 initialize_cs8420(saa, 1);
1027 }
1028 mdelay(5);
1029 if (HaveCS4341)
1030 initialize_cs4341(saa);
1031 }
1032 debiwrite(saa, debNormal, IBM_MP2_INFC_CTL, 0x48, 2);
1033 debiwrite(saa, debNormal, IBM_MP2_BEEP_CTL, 0xa000, 2);
1034 debiwrite(saa, debNormal, IBM_MP2_DISP_LBOR, 0, 2);
1035 debiwrite(saa, debNormal, IBM_MP2_DISP_TBOR, 0, 2);
1036 if (NewCard)
1037 set_genlock_offset(saa, 0);
1038 debiwrite(saa, debNormal, IBM_MP2_FRNT_ATTEN, 0, 2);
1039 debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0x2000, 2);
1040 debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4552, 2);
1041 if (ibm_send_command(saa, IBM_MP2_CONFIG_DECODER,
1042 (ChipControl == 0x43 ? 0xe800 : 0xe000), 1)) {
1043 printk(KERN_ERR "stradis%d: IBM config failed\n", saa->nr);
1044 }
1045 if (HaveCS3310) {
1046 int i = CS3310MaxLvl;
1047 debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, ((i<<8)|i), 2);
1048 }
1049 /* start video decoder */
1050 debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, ChipControl, 2);
1051 /* 256k vid, 3520 bytes aud */
1052 debiwrite(saa, debNormal, IBM_MP2_RB_THRESHOLD, 0x4037, 2);
1053 debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4573, 2);
1054 ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
1055 /* enable buffer threshold irq */
1056 debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2);
1057 /* clear pending interrupts */
1058 debiread(saa, debNormal, IBM_MP2_HOST_INT, 2);
1059 debiwrite(saa, debNormal, XILINX_CTL0, 0x1711, 2);
1060 return 0;
1061 }
1062
1063 /* load the decoder microcode */
1064 static int initialize_ibmmpeg2(struct video_code *microcode)
1065 {
1066 int i, num;
1067 struct saa7146 *saa;
1068
1069 for (num = 0; num < saa_num; num++) {
1070 saa = &saa7146s[num];
1071 /* check that FPGA is loaded */
1072 debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0xa55a, 2);
1073 if ((i = debiread(saa, debNormal, IBM_MP2_OSD_SIZE, 2)) !=
1074 0xa55a) {
1075 printk(KERN_INFO "stradis%d: %04x != 0xa55a\n",
1076 saa->nr, i);
1077 #if 0
1078 return -1;
1079 #endif
1080 }
1081 if (!strncmp(microcode->loadwhat, "decoder.vid", 11)) {
1082 if (saa->boardcfg[0] > 27)
1083 continue; /* skip to next card */
1084 /* load video control store */
1085 saa->boardcfg[1] = 0x13; /* no-sync default */
1086 debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 1, 2);
1087 debiwrite(saa, debNormal, IBM_MP2_PROC_IADDR, 0, 2);
1088 for (i = 0; i < microcode->datasize / 2; i++)
1089 debiwrite(saa, debNormal, IBM_MP2_PROC_IDATA,
1090 (microcode->data[i * 2] << 8) |
1091 microcode->data[i * 2 + 1], 2);
1092 debiwrite(saa, debNormal, IBM_MP2_PROC_IADDR, 0, 2);
1093 debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 0, 2);
1094 debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
1095 ChipControl, 2);
1096 saa->boardcfg[0] = 28;
1097 }
1098 if (!strncmp(microcode->loadwhat, "decoder.aud", 11)) {
1099 if (saa->boardcfg[0] > 35)
1100 continue; /* skip to next card */
1101 /* load audio control store */
1102 debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 1, 2);
1103 debiwrite(saa, debNormal, IBM_MP2_AUD_IADDR, 0, 2);
1104 for (i = 0; i < microcode->datasize; i++)
1105 debiwrite(saa, debNormal, IBM_MP2_AUD_IDATA,
1106 microcode->data[i], 1);
1107 debiwrite(saa, debNormal, IBM_MP2_AUD_IADDR, 0, 2);
1108 debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 0, 2);
1109 debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0x2000, 2);
1110 debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4552, 2);
1111 if (ibm_send_command(saa, IBM_MP2_CONFIG_DECODER,
1112 0xe000, 1)) {
1113 printk(KERN_ERR
1114 "stradis%d: IBM config failed\n",
1115 saa->nr);
1116 return -1;
1117 }
1118 /* set PWM to center value */
1119 if (NewCard) {
1120 debiwrite(saa, debNormal, XILINX_PWM,
1121 saa->boardcfg[14] +
1122 (saa->boardcfg[13]<<8), 2);
1123 } else
1124 debiwrite(saa, debNormal, XILINX_PWM,
1125 0x46, 2);
1126 if (HaveCS3310) {
1127 i = CS3310MaxLvl;
1128 debiwrite(saa, debNormal,
1129 XILINX_CS3310_CMPLT, ((i<<8)|i), 2);
1130 }
1131 printk(KERN_INFO
1132 "stradis%d: IBM MPEGCD%d Initialized\n",
1133 saa->nr, 18 + (debiread(saa, debNormal,
1134 IBM_MP2_CHIP_CONTROL, 2) >> 12));
1135 /* start video decoder */
1136 debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
1137 ChipControl, 2);
1138 debiwrite(saa, debNormal, IBM_MP2_RB_THRESHOLD,
1139 0x4037, 2); /* 256k vid, 3520 bytes aud */
1140 debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4573, 2);
1141 ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
1142 /* enable buffer threshold irq */
1143 debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2);
1144 debiread(saa, debNormal, IBM_MP2_HOST_INT, 2);
1145 /* enable gpio irq */
1146 saawrite(0x00002000, SAA7146_GPIO_CTRL);
1147 /* enable decoder output to HPS */
1148 debiwrite(saa, debNormal, XILINX_CTL0, 0x1711, 2);
1149 saa->boardcfg[0] = 37;
1150 }
1151 }
1152 return 0;
1153 }
1154
1155 static u32 palette2fmt[] =
1156 { /* some of these YUV translations are wrong */
1157 0xffffffff, 0x86000000, 0x87000000, 0x80000000, 0x8100000, 0x82000000,
1158 0x83000000, 0x00000000, 0x03000000, 0x03000000, 0x0a00000, 0x03000000,
1159 0x06000000, 0x00000000, 0x03000000, 0x0a000000, 0x0300000
1160 };
1161 static int bpp2fmt[4] =
1162 {
1163 VIDEO_PALETTE_HI240, VIDEO_PALETTE_RGB565, VIDEO_PALETTE_RGB24,
1164 VIDEO_PALETTE_RGB32
1165 };
1166
1167 /* I wish I could find a formula to calculate these... */
1168 static u32 h_prescale[64] =
1169 {
1170 0x10000000, 0x18040202, 0x18080000, 0x380c0606, 0x38100204, 0x38140808,
1171 0x38180000, 0x381c0000, 0x3820161c, 0x38242a3b, 0x38281230, 0x382c4460,
1172 0x38301040, 0x38340080, 0x38380000, 0x383c0000, 0x3840fefe, 0x3844ee9f,
1173 0x3848ee9f, 0x384cee9f, 0x3850ee9f, 0x38542a3b, 0x38581230, 0x385c0000,
1174 0x38600000, 0x38640000, 0x38680000, 0x386c0000, 0x38700000, 0x38740000,
1175 0x38780000, 0x387c0000, 0x30800000, 0x38840000, 0x38880000, 0x388c0000,
1176 0x38900000, 0x38940000, 0x38980000, 0x389c0000, 0x38a00000, 0x38a40000,
1177 0x38a80000, 0x38ac0000, 0x38b00000, 0x38b40000, 0x38b80000, 0x38bc0000,
1178 0x38c00000, 0x38c40000, 0x38c80000, 0x38cc0000, 0x38d00000, 0x38d40000,
1179 0x38d80000, 0x38dc0000, 0x38e00000, 0x38e40000, 0x38e80000, 0x38ec0000,
1180 0x38f00000, 0x38f40000, 0x38f80000, 0x38fc0000,
1181 };
1182 static u32 v_gain[64] =
1183 {
1184 0x016000ff, 0x016100ff, 0x016100ff, 0x016200ff, 0x016200ff, 0x016200ff,
1185 0x016200ff, 0x016300ff, 0x016300ff, 0x016300ff, 0x016300ff, 0x016300ff,
1186 0x016300ff, 0x016300ff, 0x016300ff, 0x016400ff, 0x016400ff, 0x016400ff,
1187 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
1188 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
1189 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
1190 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
1191 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
1192 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
1193 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
1194 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
1195 };
1196
1197
1198 static void saa7146_set_winsize(struct saa7146 *saa)
1199 {
1200 u32 format;
1201 int offset, yacl, ysci;
1202 saa->win.color_fmt = format =
1203 (saa->win.depth == 15) ? palette2fmt[VIDEO_PALETTE_RGB555] :
1204 palette2fmt[bpp2fmt[(saa->win.bpp - 1) & 3]];
1205 offset = saa->win.x * saa->win.bpp + saa->win.y * saa->win.bpl;
1206 saawrite(saa->win.vidadr + offset, SAA7146_BASE_EVEN1);
1207 saawrite(saa->win.vidadr + offset + saa->win.bpl, SAA7146_BASE_ODD1);
1208 saawrite(saa->win.bpl * 2, SAA7146_PITCH1);
1209 saawrite(saa->win.vidadr + saa->win.bpl * saa->win.sheight,
1210 SAA7146_PROT_ADDR1);
1211 saawrite(0, SAA7146_PAGE1);
1212 saawrite(format|0x60, SAA7146_CLIP_FORMAT_CTRL);
1213 offset = (704 / (saa->win.width - 1)) & 0x3f;
1214 saawrite(h_prescale[offset], SAA7146_HPS_H_PRESCALE);
1215 offset = (720896 / saa->win.width) / (offset + 1);
1216 saawrite((offset<<12)|0x0c, SAA7146_HPS_H_SCALE);
1217 if (CurrentMode == VIDEO_MODE_NTSC) {
1218 yacl = /*(480 / saa->win.height - 1) & 0x3f*/ 0;
1219 ysci = 1024 - (saa->win.height * 1024 / 480);
1220 } else {
1221 yacl = /*(576 / saa->win.height - 1) & 0x3f*/ 0;
1222 ysci = 1024 - (saa->win.height * 1024 / 576);
1223 }
1224 saawrite((1<<31)|(ysci<<21)|(yacl<<15), SAA7146_HPS_V_SCALE);
1225 saawrite(v_gain[yacl], SAA7146_HPS_V_GAIN);
1226 saawrite(((SAA7146_MC2_UPLD_DMA1 | SAA7146_MC2_UPLD_HPS_V |
1227 SAA7146_MC2_UPLD_HPS_H) << 16) | (SAA7146_MC2_UPLD_DMA1 |
1228 SAA7146_MC2_UPLD_HPS_V | SAA7146_MC2_UPLD_HPS_H),
1229 SAA7146_MC2);
1230 }
1231
1232 /* clip_draw_rectangle(cm,x,y,w,h) -- handle clipping an area
1233 * bitmap is fixed width, 128 bytes (1024 pixels represented)
1234 * arranged most-sigificant-bit-left in 32-bit words
1235 * based on saa7146 clipping hardware, it swaps bytes if LE
1236 * much of this makes up for egcs brain damage -- so if you
1237 * are wondering "why did he do this?" it is because the C
1238 * was adjusted to generate the optimal asm output without
1239 * writing non-portable __asm__ directives.
1240 */
1241
1242 static void clip_draw_rectangle(u32 *clipmap, int x, int y, int w, int h)
1243 {
1244 register int startword, endword;
1245 register u32 bitsleft, bitsright;
1246 u32 *temp;
1247 if (x < 0) {
1248 w += x;
1249 x = 0;
1250 }
1251 if (y < 0) {
1252 h += y;
1253 y = 0;
1254 }
1255 if (w <= 0 || h <= 0 || x > 1023 || y > 639)
1256 return; /* throw away bad clips */
1257 if (x + w > 1024)
1258 w = 1024 - x;
1259 if (y + h > 640)
1260 h = 640 - y;
1261 startword = (x >> 5);
1262 endword = ((x + w) >> 5);
1263 bitsleft = (0xffffffff >> (x & 31));
1264 bitsright = (0xffffffff << (~((x + w) - (endword<<5))));
1265 temp = &clipmap[(y<<5) + startword];
1266 w = endword - startword;
1267 if (!w) {
1268 bitsleft |= bitsright;
1269 for (y = 0; y < h; y++) {
1270 *temp |= bitsleft;
1271 temp += 32;
1272 }
1273 } else {
1274 for (y = 0; y < h; y++) {
1275 *temp++ |= bitsleft;
1276 for (x = 1; x < w; x++)
1277 *temp++ = 0xffffffff;
1278 *temp |= bitsright;
1279 temp += (32 - w);
1280 }
1281 }
1282 }
1283
1284 static void make_clip_tab(struct saa7146 *saa, struct video_clip *cr, int ncr)
1285 {
1286 int i, width, height;
1287 u32 *clipmap;
1288
1289 clipmap = saa->dmavid2;
1290 if((width=saa->win.width)>1023)
1291 width = 1023; /* sanity check */
1292 if((height=saa->win.height)>640)
1293 height = 639; /* sanity check */
1294 if (ncr > 0) { /* rectangles pased */
1295 /* convert rectangular clips to a bitmap */
1296 memset(clipmap, 0, VIDEO_CLIPMAP_SIZE); /* clear map */
1297 for (i = 0; i < ncr; i++)
1298 clip_draw_rectangle(clipmap, cr[i].x, cr[i].y,
1299 cr[i].width, cr[i].height);
1300 }
1301 /* clip against viewing window AND screen
1302 so we do not have to rely on the user program
1303 */
1304 clip_draw_rectangle(clipmap,(saa->win.x+width>saa->win.swidth) ?
1305 (saa->win.swidth-saa->win.x) : width, 0, 1024, 768);
1306 clip_draw_rectangle(clipmap,0,(saa->win.y+height>saa->win.sheight) ?
1307 (saa->win.sheight-saa->win.y) : height,1024,768);
1308 if (saa->win.x<0)
1309 clip_draw_rectangle(clipmap, 0, 0, -(saa->win.x), 768);
1310 if (saa->win.y<0)
1311 clip_draw_rectangle(clipmap, 0, 0, 1024, -(saa->win.y));
1312 }
1313
1314 static int saa_ioctl(struct inode *inode, struct file *file,
1315 unsigned int cmd, unsigned long argl)
1316 {
1317 struct saa7146 *saa = file->private_data;
1318 void __user *arg = (void __user *)argl;
1319
1320 switch (cmd) {
1321 case VIDIOCGCAP:
1322 {
1323 struct video_capability b;
1324 strcpy(b.name, saa->video_dev.name);
1325 b.type = VID_TYPE_CAPTURE |
1326 VID_TYPE_OVERLAY |
1327 VID_TYPE_CLIPPING |
1328 VID_TYPE_FRAMERAM |
1329 VID_TYPE_SCALES;
1330 b.channels = 1;
1331 b.audios = 1;
1332 b.maxwidth = 768;
1333 b.maxheight = 576;
1334 b.minwidth = 32;
1335 b.minheight = 32;
1336 if (copy_to_user(arg, &b, sizeof(b)))
1337 return -EFAULT;
1338 return 0;
1339 }
1340 case VIDIOCGPICT:
1341 {
1342 struct video_picture p = saa->picture;
1343 if (saa->win.depth == 8)
1344 p.palette = VIDEO_PALETTE_HI240;
1345 if (saa->win.depth == 15)
1346 p.palette = VIDEO_PALETTE_RGB555;
1347 if (saa->win.depth == 16)
1348 p.palette = VIDEO_PALETTE_RGB565;
1349 if (saa->win.depth == 24)
1350 p.palette = VIDEO_PALETTE_RGB24;
1351 if (saa->win.depth == 32)
1352 p.palette = VIDEO_PALETTE_RGB32;
1353 if (copy_to_user(arg, &p, sizeof(p)))
1354 return -EFAULT;
1355 return 0;
1356 }
1357 case VIDIOCSPICT:
1358 {
1359 struct video_picture p;
1360 u32 format;
1361 if (copy_from_user(&p, arg, sizeof(p)))
1362 return -EFAULT;
1363 if (p.palette < sizeof(palette2fmt) / sizeof(u32)) {
1364 format = palette2fmt[p.palette];
1365 saa->win.color_fmt = format;
1366 saawrite(format|0x60, SAA7146_CLIP_FORMAT_CTRL);
1367 }
1368 saawrite(((p.brightness & 0xff00) << 16) |
1369 ((p.contrast & 0xfe00) << 7) |
1370 ((p.colour & 0xfe00) >> 9), SAA7146_BCS_CTRL);
1371 saa->picture = p;
1372 /* upload changed registers */
1373 saawrite(((SAA7146_MC2_UPLD_HPS_H |
1374 SAA7146_MC2_UPLD_HPS_V) << 16) |
1375 SAA7146_MC2_UPLD_HPS_H | SAA7146_MC2_UPLD_HPS_V,
1376 SAA7146_MC2);
1377 return 0;
1378 }
1379 case VIDIOCSWIN:
1380 {
1381 struct video_window vw;
1382 struct video_clip *vcp = NULL;
1383
1384 if (copy_from_user(&vw, arg, sizeof(vw)))
1385 return -EFAULT;
1386
1387 if (vw.flags || vw.width < 16 || vw.height < 16) { /* stop capture */
1388 saawrite((SAA7146_MC1_TR_E_1 << 16), SAA7146_MC1);
1389 return -EINVAL;
1390 }
1391 if (saa->win.bpp < 4) { /* 32-bit align start and adjust width */
1392 int i = vw.x;
1393 vw.x = (vw.x + 3) & ~3;
1394 i = vw.x - i;
1395 vw.width -= i;
1396 }
1397 saa->win.x = vw.x;
1398 saa->win.y = vw.y;
1399 saa->win.width = vw.width;
1400 if (saa->win.width > 768)
1401 saa->win.width = 768;
1402 saa->win.height = vw.height;
1403 if (CurrentMode == VIDEO_MODE_NTSC) {
1404 if (saa->win.height > 480)
1405 saa->win.height = 480;
1406 } else {
1407 if (saa->win.height > 576)
1408 saa->win.height = 576;
1409 }
1410
1411 /* stop capture */
1412 saawrite((SAA7146_MC1_TR_E_1 << 16), SAA7146_MC1);
1413 saa7146_set_winsize(saa);
1414
1415 /*
1416 * Do any clips.
1417 */
1418 if (vw.clipcount < 0) {
1419 if (copy_from_user(saa->dmavid2, vw.clips,
1420 VIDEO_CLIPMAP_SIZE))
1421 return -EFAULT;
1422 }
1423 else if (vw.clipcount > 16384) {
1424 return -EINVAL;
1425 } else if (vw.clipcount > 0) {
1426 if ((vcp = vmalloc(sizeof(struct video_clip) *
1427 (vw.clipcount))) == NULL)
1428 return -ENOMEM;
1429 if (copy_from_user(vcp, vw.clips,
1430 sizeof(struct video_clip) *
1431 vw.clipcount)) {
1432 vfree(vcp);
1433 return -EFAULT;
1434 }
1435 } else /* nothing clipped */
1436 memset(saa->dmavid2, 0, VIDEO_CLIPMAP_SIZE);
1437 make_clip_tab(saa, vcp, vw.clipcount);
1438 if (vw.clipcount > 0)
1439 vfree(vcp);
1440
1441 /* start capture & clip dma if we have an address */
1442 if ((saa->cap & 3) && saa->win.vidadr != 0)
1443 saawrite(((SAA7146_MC1_TR_E_1 |
1444 SAA7146_MC1_TR_E_2) << 16) | 0xffff,
1445 SAA7146_MC1);
1446 return 0;
1447 }
1448 case VIDIOCGWIN:
1449 {
1450 struct video_window vw;
1451 vw.x = saa->win.x;
1452 vw.y = saa->win.y;
1453 vw.width = saa->win.width;
1454 vw.height = saa->win.height;
1455 vw.chromakey = 0;
1456 vw.flags = 0;
1457 if (copy_to_user(arg, &vw, sizeof(vw)))
1458 return -EFAULT;
1459 return 0;
1460 }
1461 case VIDIOCCAPTURE:
1462 {
1463 int v;
1464 if (copy_from_user(&v, arg, sizeof(v)))
1465 return -EFAULT;
1466 if (v == 0) {
1467 saa->cap &= ~1;
1468 saawrite((SAA7146_MC1_TR_E_1 << 16),
1469 SAA7146_MC1);
1470 } else {
1471 if (saa->win.vidadr == 0 || saa->win.width == 0
1472 || saa->win.height == 0)
1473 return -EINVAL;
1474 saa->cap |= 1;
1475 saawrite((SAA7146_MC1_TR_E_1 << 16) | 0xffff,
1476 SAA7146_MC1);
1477 }
1478 return 0;
1479 }
1480 case VIDIOCGFBUF:
1481 {
1482 struct video_buffer v;
1483 v.base = (void *) saa->win.vidadr;
1484 v.height = saa->win.sheight;
1485 v.width = saa->win.swidth;
1486 v.depth = saa->win.depth;
1487 v.bytesperline = saa->win.bpl;
1488 if (copy_to_user(arg, &v, sizeof(v)))
1489 return -EFAULT;
1490 return 0;
1491
1492 }
1493 case VIDIOCSFBUF:
1494 {
1495 struct video_buffer v;
1496 if (!capable(CAP_SYS_ADMIN))
1497 return -EPERM;
1498 if (copy_from_user(&v, arg, sizeof(v)))
1499 return -EFAULT;
1500 if (v.depth != 8 && v.depth != 15 && v.depth != 16 &&
1501 v.depth != 24 && v.depth != 32 && v.width > 16 &&
1502 v.height > 16 && v.bytesperline > 16)
1503 return -EINVAL;
1504 if (v.base)
1505 saa->win.vidadr = (unsigned long) v.base;
1506 saa->win.sheight = v.height;
1507 saa->win.swidth = v.width;
1508 saa->win.bpp = ((v.depth + 7) & 0x38) / 8;
1509 saa->win.depth = v.depth;
1510 saa->win.bpl = v.bytesperline;
1511
1512 DEBUG(printk("Display at %p is %d by %d, bytedepth %d, bpl %d\n",
1513 v.base, v.width, v.height, saa->win.bpp, saa->win.bpl));
1514 saa7146_set_winsize(saa);
1515 return 0;
1516 }
1517 case VIDIOCKEY:
1518 {
1519 /* Will be handled higher up .. */
1520 return 0;
1521 }
1522
1523 case VIDIOCGAUDIO:
1524 {
1525 struct video_audio v;
1526 v = saa->audio_dev;
1527 v.flags &= ~(VIDEO_AUDIO_MUTE | VIDEO_AUDIO_MUTABLE);
1528 v.flags |= VIDEO_AUDIO_MUTABLE | VIDEO_AUDIO_VOLUME;
1529 strcpy(v.name, "MPEG");
1530 v.mode = VIDEO_SOUND_STEREO;
1531 if (copy_to_user(arg, &v, sizeof(v)))
1532 return -EFAULT;
1533 return 0;
1534 }
1535 case VIDIOCSAUDIO:
1536 {
1537 struct video_audio v;
1538 int i;
1539 if (copy_from_user(&v, arg, sizeof(v)))
1540 return -EFAULT;
1541 i = (~(v.volume>>8))&0xff;
1542 if (!HaveCS4341) {
1543 if (v.flags & VIDEO_AUDIO_MUTE) {
1544 debiwrite(saa, debNormal,
1545 IBM_MP2_FRNT_ATTEN,
1546 0xffff, 2);
1547 }
1548 if (!(v.flags & VIDEO_AUDIO_MUTE))
1549 debiwrite(saa, debNormal,
1550 IBM_MP2_FRNT_ATTEN,
1551 0x0000, 2);
1552 if (v.flags & VIDEO_AUDIO_VOLUME)
1553 debiwrite(saa, debNormal,
1554 IBM_MP2_FRNT_ATTEN,
1555 (i<<8)|i, 2);
1556 } else {
1557 if (v.flags & VIDEO_AUDIO_MUTE)
1558 cs4341_setlevel(saa, 0xff, 0xff);
1559 if (!(v.flags & VIDEO_AUDIO_MUTE))
1560 cs4341_setlevel(saa, 0, 0);
1561 if (v.flags & VIDEO_AUDIO_VOLUME)
1562 cs4341_setlevel(saa, i, i);
1563 }
1564 saa->audio_dev = v;
1565 return 0;
1566 }
1567
1568 case VIDIOCGUNIT:
1569 {
1570 struct video_unit vu;
1571 vu.video = saa->video_dev.minor;
1572 vu.vbi = VIDEO_NO_UNIT;
1573 vu.radio = VIDEO_NO_UNIT;
1574 vu.audio = VIDEO_NO_UNIT;
1575 vu.teletext = VIDEO_NO_UNIT;
1576 if (copy_to_user(arg, &vu, sizeof(vu)))
1577 return -EFAULT;
1578 return 0;
1579 }
1580 case VIDIOCSPLAYMODE:
1581 {
1582 struct video_play_mode pmode;
1583 if (copy_from_user((void *) &pmode, arg,
1584 sizeof(struct video_play_mode)))
1585 return -EFAULT;
1586 switch (pmode.mode) {
1587 case VID_PLAY_VID_OUT_MODE:
1588 if (pmode.p1 != VIDEO_MODE_NTSC &&
1589 pmode.p1 != VIDEO_MODE_PAL)
1590 return -EINVAL;
1591 set_out_format(saa, pmode.p1);
1592 return 0;
1593 case VID_PLAY_GENLOCK:
1594 debiwrite(saa, debNormal,
1595 XILINX_CTL0,
1596 (pmode.p1 ? 0x8000 : 0x8080),
1597 2);
1598 if (NewCard)
1599 set_genlock_offset(saa,
1600 pmode.p2);
1601 return 0;
1602 case VID_PLAY_NORMAL:
1603 debiwrite(saa, debNormal,
1604 IBM_MP2_CHIP_CONTROL,
1605 ChipControl, 2);
1606 ibm_send_command(saa,
1607 IBM_MP2_PLAY, 0, 0);
1608 saa->playmode = pmode.mode;
1609 return 0;
1610 case VID_PLAY_PAUSE:
1611 /* IBM removed the PAUSE command */
1612 /* they say use SINGLE_FRAME now */
1613 case VID_PLAY_SINGLE_FRAME:
1614 ibm_send_command(saa,
1615 IBM_MP2_SINGLE_FRAME,
1616 0, 0);
1617 if (saa->playmode == pmode.mode) {
1618 debiwrite(saa, debNormal,
1619 IBM_MP2_CHIP_CONTROL,
1620 ChipControl, 2);
1621 }
1622 saa->playmode = pmode.mode;
1623 return 0;
1624 case VID_PLAY_FAST_FORWARD:
1625 ibm_send_command(saa,
1626 IBM_MP2_FAST_FORWARD, 0, 0);
1627 saa->playmode = pmode.mode;
1628 return 0;
1629 case VID_PLAY_SLOW_MOTION:
1630 ibm_send_command(saa,
1631 IBM_MP2_SLOW_MOTION,
1632 pmode.p1, 0);
1633 saa->playmode = pmode.mode;
1634 return 0;
1635 case VID_PLAY_IMMEDIATE_NORMAL:
1636 /* ensure transfers resume */
1637 debiwrite(saa, debNormal,
1638 IBM_MP2_CHIP_CONTROL,
1639 ChipControl, 2);
1640 ibm_send_command(saa,
1641 IBM_MP2_IMED_NORM_PLAY, 0, 0);
1642 saa->playmode = VID_PLAY_NORMAL;
1643 return 0;
1644 case VID_PLAY_SWITCH_CHANNELS:
1645 saa->audhead = saa->audtail = 0;
1646 saa->vidhead = saa->vidtail = 0;
1647 ibm_send_command(saa,
1648 IBM_MP2_FREEZE_FRAME, 0, 1);
1649 ibm_send_command(saa,
1650 IBM_MP2_RESET_AUD_RATE, 0, 1);
1651 debiwrite(saa, debNormal,
1652 IBM_MP2_CHIP_CONTROL, 0, 2);
1653 ibm_send_command(saa,
1654 IBM_MP2_CHANNEL_SWITCH, 0, 1);
1655 debiwrite(saa, debNormal,
1656 IBM_MP2_CHIP_CONTROL,
1657 ChipControl, 2);
1658 ibm_send_command(saa,
1659 IBM_MP2_PLAY, 0, 0);
1660 saa->playmode = VID_PLAY_NORMAL;
1661 return 0;
1662 case VID_PLAY_FREEZE_FRAME:
1663 ibm_send_command(saa,
1664 IBM_MP2_FREEZE_FRAME, 0, 0);
1665 saa->playmode = pmode.mode;
1666 return 0;
1667 case VID_PLAY_STILL_MODE:
1668 ibm_send_command(saa,
1669 IBM_MP2_SET_STILL_MODE, 0, 0);
1670 saa->playmode = pmode.mode;
1671 return 0;
1672 case VID_PLAY_MASTER_MODE:
1673 if (pmode.p1 == VID_PLAY_MASTER_NONE)
1674 saa->boardcfg[1] = 0x13;
1675 else if (pmode.p1 ==
1676 VID_PLAY_MASTER_VIDEO)
1677 saa->boardcfg[1] = 0x23;
1678 else if (pmode.p1 ==
1679 VID_PLAY_MASTER_AUDIO)
1680 saa->boardcfg[1] = 0x43;
1681 else
1682 return -EINVAL;
1683 debiwrite(saa, debNormal,
1684 IBM_MP2_CHIP_CONTROL,
1685 ChipControl, 2);
1686 return 0;
1687 case VID_PLAY_ACTIVE_SCANLINES:
1688 if (CurrentMode == VIDEO_MODE_PAL) {
1689 if (pmode.p1 < 1 ||
1690 pmode.p2 > 625)
1691 return -EINVAL;
1692 saa->boardcfg[5] = pmode.p1;
1693 saa->boardcfg[55] = (pmode.p1 +
1694 (pmode.p2/2) - 1) &
1695 0xff;
1696 } else {
1697 if (pmode.p1 < 4 ||
1698 pmode.p2 > 525)
1699 return -EINVAL;
1700 saa->boardcfg[4] = pmode.p1;
1701 saa->boardcfg[54] = (pmode.p1 +
1702 (pmode.p2/2) - 4) &
1703 0xff;
1704 }
1705 set_out_format(saa, CurrentMode);
1706 case VID_PLAY_RESET:
1707 return do_ibm_reset(saa);
1708 case VID_PLAY_END_MARK:
1709 if (saa->endmarktail <
1710 saa->endmarkhead) {
1711 if (saa->endmarkhead -
1712 saa->endmarktail < 2)
1713 return -ENOSPC;
1714 } else if (saa->endmarkhead <=
1715 saa->endmarktail) {
1716 if (saa->endmarktail -
1717 saa->endmarkhead >
1718 (MAX_MARKS - 2))
1719 return -ENOSPC;
1720 } else
1721 return -ENOSPC;
1722 saa->endmark[saa->endmarktail] =
1723 saa->audtail;
1724 saa->endmarktail++;
1725 if (saa->endmarktail >= MAX_MARKS)
1726 saa->endmarktail = 0;
1727 }
1728 return -EINVAL;
1729 }
1730 case VIDIOCSWRITEMODE:
1731 {
1732 int mode;
1733 if (copy_from_user((void *) &mode, arg, sizeof(int)))
1734 return -EFAULT;
1735 if (mode == VID_WRITE_MPEG_AUD ||
1736 mode == VID_WRITE_MPEG_VID ||
1737 mode == VID_WRITE_CC ||
1738 mode == VID_WRITE_TTX ||
1739 mode == VID_WRITE_OSD) {
1740 saa->writemode = mode;
1741 return 0;
1742 }
1743 return -EINVAL;
1744 }
1745 case VIDIOCSMICROCODE:
1746 {
1747 struct video_code ucode;
1748 __u8 *udata;
1749 int i;
1750 if (copy_from_user(&ucode, arg, sizeof(ucode)))
1751 return -EFAULT;
1752 if (ucode.datasize > 65536 || ucode.datasize < 1024 ||
1753 strncmp(ucode.loadwhat, "dec", 3))
1754 return -EINVAL;
1755 if ((udata = vmalloc(ucode.datasize)) == NULL)
1756 return -ENOMEM;
1757 if (copy_from_user(udata, ucode.data, ucode.datasize)) {
1758 vfree(udata);
1759 return -EFAULT;
1760 }
1761 ucode.data = udata;
1762 if (!strncmp(ucode.loadwhat, "decoder.aud", 11)
1763 || !strncmp(ucode.loadwhat, "decoder.vid", 11))
1764 i = initialize_ibmmpeg2(&ucode);
1765 else
1766 i = initialize_fpga(&ucode);
1767 vfree(udata);
1768 if (i)
1769 return -EINVAL;
1770 return 0;
1771
1772 }
1773 case VIDIOCGCHAN: /* this makes xawtv happy */
1774 {
1775 struct video_channel v;
1776 if (copy_from_user(&v, arg, sizeof(v)))
1777 return -EFAULT;
1778 v.flags = VIDEO_VC_AUDIO;
1779 v.tuners = 0;
1780 v.type = VID_TYPE_MPEG_DECODER;
1781 v.norm = CurrentMode;
1782 strcpy(v.name, "MPEG2");
1783 if (copy_to_user(arg, &v, sizeof(v)))
1784 return -EFAULT;
1785 return 0;
1786 }
1787 case VIDIOCSCHAN: /* this makes xawtv happy */
1788 {
1789 struct video_channel v;
1790 if (copy_from_user(&v, arg, sizeof(v)))
1791 return -EFAULT;
1792 /* do nothing */
1793 return 0;
1794 }
1795 default:
1796 return -ENOIOCTLCMD;
1797 }
1798 return 0;
1799 }
1800
1801 static int saa_mmap(struct file *file, struct vm_area_struct *vma)
1802 {
1803 struct saa7146 *saa = file->private_data;
1804 printk(KERN_DEBUG "stradis%d: saa_mmap called\n", saa->nr);
1805 return -EINVAL;
1806 }
1807
1808 static ssize_t saa_read(struct file *file, char __user *buf,
1809 size_t count, loff_t *ppos)
1810 {
1811 return -EINVAL;
1812 }
1813
1814 static ssize_t saa_write(struct file *file, const char __user *buf,
1815 size_t count, loff_t *ppos)
1816 {
1817 struct saa7146 *saa = file->private_data;
1818 unsigned long todo = count;
1819 int blocksize, split;
1820 unsigned long flags;
1821
1822 while (todo > 0) {
1823 if (saa->writemode == VID_WRITE_MPEG_AUD) {
1824 spin_lock_irqsave(&saa->lock, flags);
1825 if (saa->audhead <= saa->audtail)
1826 blocksize = 65536-(saa->audtail - saa->audhead);
1827 else
1828 blocksize = saa->audhead - saa->audtail;
1829 spin_unlock_irqrestore(&saa->lock, flags);
1830 if (blocksize < 16384) {
1831 saawrite(SAA7146_PSR_DEBI_S |
1832 SAA7146_PSR_PIN1, SAA7146_IER);
1833 saawrite(SAA7146_PSR_PIN1, SAA7146_PSR);
1834 /* wait for buffer space to open */
1835 interruptible_sleep_on(&saa->audq);
1836 }
1837 spin_lock_irqsave(&saa->lock, flags);
1838 if (saa->audhead <= saa->audtail) {
1839 blocksize = 65536-(saa->audtail - saa->audhead);
1840 split = 65536 - saa->audtail;
1841 } else {
1842 blocksize = saa->audhead - saa->audtail;
1843 split = 65536;
1844 }
1845 spin_unlock_irqrestore(&saa->lock, flags);
1846 blocksize--;
1847 if (blocksize > todo)
1848 blocksize = todo;
1849 /* double check that we really have space */
1850 if (!blocksize)
1851 return -ENOSPC;
1852 if (split < blocksize) {
1853 if (copy_from_user(saa->audbuf +
1854 saa->audtail, buf, split))
1855 return -EFAULT;
1856 buf += split;
1857 todo -= split;
1858 blocksize -= split;
1859 saa->audtail = 0;
1860 }
1861 if (copy_from_user(saa->audbuf + saa->audtail, buf,
1862 blocksize))
1863 return -EFAULT;
1864 saa->audtail += blocksize;
1865 todo -= blocksize;
1866 buf += blocksize;
1867 saa->audtail &= 0xffff;
1868 } else if (saa->writemode == VID_WRITE_MPEG_VID) {
1869 spin_lock_irqsave(&saa->lock, flags);
1870 if (saa->vidhead <= saa->vidtail)
1871 blocksize=524288-(saa->vidtail - saa->vidhead);
1872 else
1873 blocksize = saa->vidhead - saa->vidtail;
1874 spin_unlock_irqrestore(&saa->lock, flags);
1875 if (blocksize < 65536) {
1876 saawrite(SAA7146_PSR_DEBI_S |
1877 SAA7146_PSR_PIN1, SAA7146_IER);
1878 saawrite(SAA7146_PSR_PIN1, SAA7146_PSR);
1879 /* wait for buffer space to open */
1880 interruptible_sleep_on(&saa->vidq);
1881 }
1882 spin_lock_irqsave(&saa->lock, flags);
1883 if (saa->vidhead <= saa->vidtail) {
1884 blocksize=524288-(saa->vidtail - saa->vidhead);
1885 split = 524288 - saa->vidtail;
1886 } else {
1887 blocksize = saa->vidhead - saa->vidtail;
1888 split = 524288;
1889 }
1890 spin_unlock_irqrestore(&saa->lock, flags);
1891 blocksize--;
1892 if (blocksize > todo)
1893 blocksize = todo;
1894 /* double check that we really have space */
1895 if (!blocksize)
1896 return -ENOSPC;
1897 if (split < blocksize) {
1898 if (copy_from_user(saa->vidbuf +
1899 saa->vidtail, buf, split))
1900 return -EFAULT;
1901 buf += split;
1902 todo -= split;
1903 blocksize -= split;
1904 saa->vidtail = 0;
1905 }
1906 if (copy_from_user(saa->vidbuf + saa->vidtail, buf,
1907 blocksize))
1908 return -EFAULT;
1909 saa->vidtail += blocksize;
1910 todo -= blocksize;
1911 buf += blocksize;
1912 saa->vidtail &= 0x7ffff;
1913 } else if (saa->writemode == VID_WRITE_OSD) {
1914 if (count > 131072)
1915 return -ENOSPC;
1916 if (copy_from_user(saa->osdbuf, buf, count))
1917 return -EFAULT;
1918 buf += count;
1919 saa->osdhead = 0;
1920 saa->osdtail = count;
1921 debiwrite(saa, debNormal, IBM_MP2_OSD_ADDR, 0, 2);
1922 debiwrite(saa, debNormal, IBM_MP2_OSD_LINK_ADDR, 0, 2);
1923 debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00d, 2);
1924 debiwrite(saa, debNormal, IBM_MP2_DISP_MODE,
1925 debiread(saa, debNormal,
1926 IBM_MP2_DISP_MODE, 2) | 1, 2);
1927 /* trigger osd data transfer */
1928 saawrite(SAA7146_PSR_DEBI_S |
1929 SAA7146_PSR_PIN1, SAA7146_IER);
1930 saawrite(SAA7146_PSR_PIN1, SAA7146_PSR);
1931 }
1932 }
1933 return count;
1934 }
1935
1936 static int saa_open(struct inode *inode, struct file *file)
1937 {
1938 struct saa7146 *saa = NULL;
1939 unsigned int minor = iminor(inode);
1940 int i;
1941
1942 for (i = 0; i < SAA7146_MAX; i++) {
1943 if (saa7146s[i].video_dev.minor == minor) {
1944 saa = &saa7146s[i];
1945 }
1946 }
1947 if (saa == NULL) {
1948 return -ENODEV;
1949 }
1950 file->private_data = saa;
1951
1952 //saa->video_dev.busy = 0; /* old hack to support multiple open */
1953 saa->user++;
1954 if (saa->user > 1)
1955 return 0; /* device open already, don't reset */
1956 saa->writemode = VID_WRITE_MPEG_VID; /* default to video */
1957 return 0;
1958 }
1959
1960 static int saa_release(struct inode *inode, struct file *file)
1961 {
1962 struct saa7146 *saa = file->private_data;
1963 saa->user--;
1964 //saa->video_dev.busy = 0; /* old hack to support multiple open */
1965 if (saa->user > 0) /* still someone using device */
1966 return 0;
1967 saawrite(0x007f0000, SAA7146_MC1); /* stop all overlay dma */
1968 return 0;
1969 }
1970
1971 static struct file_operations saa_fops =
1972 {
1973 .owner = THIS_MODULE,
1974 .open = saa_open,
1975 .release = saa_release,
1976 .ioctl = saa_ioctl,
1977 .read = saa_read,
1978 .llseek = no_llseek,
1979 .write = saa_write,
1980 .mmap = saa_mmap,
1981 };
1982
1983 /* template for video_device-structure */
1984 static struct video_device saa_template =
1985 {
1986 .name = "SAA7146A",
1987 .type = VID_TYPE_CAPTURE | VID_TYPE_OVERLAY,
1988 .hardware = VID_HARDWARE_SAA7146,
1989 .fops = &saa_fops,
1990 .minor = -1,
1991 };
1992
1993 static int configure_saa7146(struct pci_dev *dev, int num)
1994 {
1995 int result;
1996 struct saa7146 *saa;
1997
1998 saa = &saa7146s[num];
1999
2000 saa->endmarkhead = saa->endmarktail = 0;
2001 saa->win.x = saa->win.y = 0;
2002 saa->win.width = saa->win.cropwidth = 720;
2003 saa->win.height = saa->win.cropheight = 480;
2004 saa->win.cropx = saa->win.cropy = 0;
2005 saa->win.bpp = 2;
2006 saa->win.depth = 16;
2007 saa->win.color_fmt = palette2fmt[VIDEO_PALETTE_RGB565];
2008 saa->win.bpl = 1024 * saa->win.bpp;
2009 saa->win.swidth = 1024;
2010 saa->win.sheight = 768;
2011 saa->picture.brightness = 32768;
2012 saa->picture.contrast = 38768;
2013 saa->picture.colour = 32768;
2014 saa->cap = 0;
2015 saa->dev = dev;
2016 saa->nr = num;
2017 saa->playmode = VID_PLAY_NORMAL;
2018 memset(saa->boardcfg, 0, 64); /* clear board config area */
2019 saa->saa7146_mem = NULL;
2020 saa->dmavid1 = saa->dmavid2 = saa->dmavid3 = saa->dmaa1in =
2021 saa->dmaa1out = saa->dmaa2in = saa->dmaa2out =
2022 saa->pagevid1 = saa->pagevid2 = saa->pagevid3 = saa->pagea1in =
2023 saa->pagea1out = saa->pagea2in = saa->pagea2out =
2024 saa->pagedebi = saa->dmaRPS1 = saa->dmaRPS2 = saa->pageRPS1 =
2025 saa->pageRPS2 = NULL;
2026 saa->audbuf = saa->vidbuf = saa->osdbuf = saa->dmadebi = NULL;
2027 saa->audhead = saa->vidtail = 0;
2028
2029 init_waitqueue_head(&saa->i2cq);
2030 init_waitqueue_head(&saa->audq);
2031 init_waitqueue_head(&saa->debiq);
2032 init_waitqueue_head(&saa->vidq);
2033 spin_lock_init(&saa->lock);
2034
2035 if (pci_enable_device(dev))
2036 return -EIO;
2037
2038 saa->id = dev->device;
2039 saa->irq = dev->irq;
2040 saa->video_dev.minor = -1;
2041 saa->saa7146_adr = pci_resource_start(dev, 0);
2042 pci_read_config_byte(dev, PCI_CLASS_REVISION, &saa->revision);
2043
2044 saa->saa7146_mem = ioremap(saa->saa7146_adr, 0x200);
2045 if (!saa->saa7146_mem)
2046 return -EIO;
2047
2048 memcpy(&saa->video_dev, &saa_template, sizeof(saa_template));
2049 saawrite(0, SAA7146_IER); /* turn off all interrupts */
2050 result = request_irq(saa->irq, saa7146_irq,
2051 SA_SHIRQ | SA_INTERRUPT, "stradis", (void *) saa);
2052 if (result == -EINVAL)
2053 printk(KERN_ERR "stradis%d: Bad irq number or handler\n",
2054 num);
2055 if (result == -EBUSY)
2056 printk(KERN_ERR "stradis%d: IRQ %ld busy, change your PnP"
2057 " config in BIOS\n", num, saa->irq);
2058 if (result < 0) {
2059 iounmap(saa->saa7146_mem);
2060 return result;
2061 }
2062 pci_set_master(dev);
2063 if (video_register_device(&saa->video_dev, VFL_TYPE_GRABBER, video_nr) < 0) {
2064 iounmap(saa->saa7146_mem);
2065 return -1;
2066 }
2067 return 0;
2068 }
2069
2070 static int init_saa7146(int i)
2071 {
2072 struct saa7146 *saa = &saa7146s[i];
2073
2074 saa->user = 0;
2075 /* reset the saa7146 */
2076 saawrite(0xffff0000, SAA7146_MC1);
2077 mdelay(5);
2078 /* enable debi and i2c transfers and pins */
2079 saawrite(((SAA7146_MC1_EDP | SAA7146_MC1_EI2C |
2080 SAA7146_MC1_TR_E_DEBI) << 16) | 0xffff, SAA7146_MC1);
2081 /* ensure proper state of chip */
2082 saawrite(0x00000000, SAA7146_PAGE1);
2083 saawrite(0x00f302c0, SAA7146_NUM_LINE_BYTE1);
2084 saawrite(0x00000000, SAA7146_PAGE2);
2085 saawrite(0x01400080, SAA7146_NUM_LINE_BYTE2);
2086 saawrite(0x00000000, SAA7146_DD1_INIT);
2087 saawrite(0x00000000, SAA7146_DD1_STREAM_B);
2088 saawrite(0x00000000, SAA7146_DD1_STREAM_A);
2089 saawrite(0x00000000, SAA7146_BRS_CTRL);
2090 saawrite(0x80400040, SAA7146_BCS_CTRL);
2091 saawrite(0x0000e000 /*| (1<<29)*/, SAA7146_HPS_CTRL);
2092 saawrite(0x00000060, SAA7146_CLIP_FORMAT_CTRL);
2093 saawrite(0x00000000, SAA7146_ACON1);
2094 saawrite(0x00000000, SAA7146_ACON2);
2095 saawrite(0x00000600, SAA7146_I2C_STATUS);
2096 saawrite(((SAA7146_MC2_UPLD_D1_B | SAA7146_MC2_UPLD_D1_A |
2097 SAA7146_MC2_UPLD_BRS | SAA7146_MC2_UPLD_HPS_H |
2098 SAA7146_MC2_UPLD_HPS_V | SAA7146_MC2_UPLD_DMA2 |
2099 SAA7146_MC2_UPLD_DMA1 | SAA7146_MC2_UPLD_I2C) << 16) | 0xffff,
2100 SAA7146_MC2);
2101 /* setup arbitration control registers */
2102 saawrite(0x1412121a, SAA7146_PCI_BT_V1);
2103
2104 /* allocate 32k dma buffer + 4k for page table */
2105 if ((saa->dmadebi = kmalloc(32768 + 4096, GFP_KERNEL)) == NULL) {
2106 printk(KERN_ERR "stradis%d: debi kmalloc failed\n", i);
2107 return -1;
2108 }
2109 #if 0
2110 saa->pagedebi = saa->dmadebi + 32768; /* top 4k is for mmu */
2111 saawrite(virt_to_bus(saa->pagedebi) /*|0x800 */ , SAA7146_DEBI_PAGE);
2112 for (i = 0; i < 12; i++) /* setup mmu page table */
2113 saa->pagedebi[i] = virt_to_bus((saa->dmadebi + i * 4096));
2114 #endif
2115 saa->audhead = saa->vidhead = saa->osdhead = 0;
2116 saa->audtail = saa->vidtail = saa->osdtail = 0;
2117 if (saa->vidbuf == NULL)
2118 if ((saa->vidbuf = vmalloc(524288)) == NULL) {
2119 printk(KERN_ERR "stradis%d: malloc failed\n", saa->nr);
2120 return -ENOMEM;
2121 }
2122 if (saa->audbuf == NULL)
2123 if ((saa->audbuf = vmalloc(65536)) == NULL) {
2124 printk(KERN_ERR "stradis%d: malloc failed\n", saa->nr);
2125 vfree(saa->vidbuf);
2126 saa->vidbuf = NULL;
2127 return -ENOMEM;
2128 }
2129 if (saa->osdbuf == NULL)
2130 if ((saa->osdbuf = vmalloc(131072)) == NULL) {
2131 printk(KERN_ERR "stradis%d: malloc failed\n", saa->nr);
2132 vfree(saa->vidbuf);
2133 vfree(saa->audbuf);
2134 saa->vidbuf = saa->audbuf = NULL;
2135 return -ENOMEM;
2136 }
2137 /* allocate 81920 byte buffer for clipping */
2138 if ((saa->dmavid2 = kmalloc(VIDEO_CLIPMAP_SIZE, GFP_KERNEL)) == NULL) {
2139 printk(KERN_ERR "stradis%d: clip kmalloc failed\n", saa->nr);
2140 vfree(saa->vidbuf);
2141 vfree(saa->audbuf);
2142 vfree(saa->osdbuf);
2143 saa->vidbuf = saa->audbuf = saa->osdbuf = NULL;
2144 saa->dmavid2 = NULL;
2145 return -1;
2146 }
2147 memset(saa->dmavid2, 0x00, VIDEO_CLIPMAP_SIZE); /* clip everything */
2148 /* setup clipping registers */
2149 saawrite(virt_to_bus(saa->dmavid2), SAA7146_BASE_EVEN2);
2150 saawrite(virt_to_bus(saa->dmavid2) + 128, SAA7146_BASE_ODD2);
2151 saawrite(virt_to_bus(saa->dmavid2) + VIDEO_CLIPMAP_SIZE,
2152 SAA7146_PROT_ADDR2);
2153 saawrite(256, SAA7146_PITCH2);
2154 saawrite(4, SAA7146_PAGE2); /* dma direction: read, no byteswap */
2155 saawrite(((SAA7146_MC2_UPLD_DMA2) << 16) | SAA7146_MC2_UPLD_DMA2,
2156 SAA7146_MC2);
2157 I2CBusScan(saa);
2158 return 0;
2159 }
2160
2161 static void release_saa(void)
2162 {
2163 u8 command;
2164 int i;
2165 struct saa7146 *saa;
2166
2167 for (i = 0; i < saa_num; i++) {
2168 saa = &saa7146s[i];
2169
2170 /* turn off all capturing, DMA and IRQs */
2171 saawrite(0xffff0000, SAA7146_MC1); /* reset chip */
2172 saawrite(0, SAA7146_MC2);
2173 saawrite(0, SAA7146_IER);
2174 saawrite(0xffffffffUL, SAA7146_ISR);
2175
2176 /* disable PCI bus-mastering */
2177 pci_read_config_byte(saa->dev, PCI_COMMAND, &command);
2178 command &= ~PCI_COMMAND_MASTER;
2179 pci_write_config_byte(saa->dev, PCI_COMMAND, command);
2180
2181 /* unmap and free memory */
2182 saa->audhead = saa->audtail = saa->osdhead = 0;
2183 saa->vidhead = saa->vidtail = saa->osdtail = 0;
2184 vfree(saa->vidbuf);
2185 vfree(saa->audbuf);
2186 vfree(saa->osdbuf);
2187 if (saa->dmavid2)
2188 kfree((void *) saa->dmavid2);
2189 saa->audbuf = saa->vidbuf = saa->osdbuf = NULL;
2190 saa->dmavid2 = NULL;
2191 if (saa->dmadebi)
2192 kfree((void *) saa->dmadebi);
2193 if (saa->dmavid1)
2194 kfree((void *) saa->dmavid1);
2195 if (saa->dmavid2)
2196 kfree((void *) saa->dmavid2);
2197 if (saa->dmavid3)
2198 kfree((void *) saa->dmavid3);
2199 if (saa->dmaa1in)
2200 kfree((void *) saa->dmaa1in);
2201 if (saa->dmaa1out)
2202 kfree((void *) saa->dmaa1out);
2203 if (saa->dmaa2in)
2204 kfree((void *) saa->dmaa2in);
2205 if (saa->dmaa2out)
2206 kfree((void *) saa->dmaa2out);
2207 if (saa->dmaRPS1)
2208 kfree((void *) saa->dmaRPS1);
2209 if (saa->dmaRPS2)
2210 kfree((void *) saa->dmaRPS2);
2211 free_irq(saa->irq, saa);
2212 if (saa->saa7146_mem)
2213 iounmap(saa->saa7146_mem);
2214 if (saa->video_dev.minor != -1)
2215 video_unregister_device(&saa->video_dev);
2216 }
2217 }
2218
2219
2220 static int __init stradis_init (void)
2221 {
2222 struct pci_dev *dev = NULL;
2223 int result = 0, i;
2224
2225 saa_num = 0;
2226
2227 while ((dev = pci_find_device(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA7146, dev))) {
2228 if (!dev->subsystem_vendor)
2229 printk(KERN_INFO "stradis%d: rev1 decoder\n", saa_num);
2230 else
2231 printk(KERN_INFO "stradis%d: SDM2xx found\n", saa_num);
2232 result = configure_saa7146(dev, saa_num++);
2233 if (result)
2234 return result;
2235 }
2236 if (saa_num)
2237 printk(KERN_INFO "stradis: %d card(s) found.\n", saa_num);
2238 else
2239 return -EINVAL;
2240 for (i = 0; i < saa_num; i++)
2241 if (init_saa7146(i) < 0) {
2242 release_saa();
2243 return -EIO;
2244 }
2245 return 0;
2246 }
2247
2248
2249 static void __exit stradis_exit (void)
2250 {
2251 release_saa();
2252 printk(KERN_INFO "stradis: module cleanup complete\n");
2253 }
2254
2255
2256 module_init(stradis_init);
2257 module_exit(stradis_exit);
2258
Verdex Pro support