1 /****************************************************************************/
4 * nettel.c -- mappings for NETtel/SecureEdge/SnapGear (x86) boards.
6 * (C) Copyright 2000-2001, Greg Ungerer (gerg@snapgear.com)
7 * (C) Copyright 2001-2002, SnapGear (www.snapgear.com)
9 * $Id: nettel.c,v 1.10 2005/01/05 17:11:29 dwmw2 Exp $
12 /****************************************************************************/
14 #include <linux/module.h>
15 #include <linux/init.h>
16 #include <linux/types.h>
17 #include <linux/kernel.h>
18 #include <linux/mtd/mtd.h>
19 #include <linux/mtd/map.h>
20 #include <linux/mtd/partitions.h>
21 #include <linux/mtd/cfi.h>
22 #include <linux/reboot.h>
25 /****************************************************************************/
27 #define INTEL_BUSWIDTH 1
28 #define AMD_WINDOW_MAXSIZE 0x00200000
29 #define AMD_BUSWIDTH 1
32 * PAR masks and shifts, assuming 64K pages.
34 #define SC520_PAR_ADDR_MASK 0x00003fff
35 #define SC520_PAR_ADDR_SHIFT 16
36 #define SC520_PAR_TO_ADDR(par) \
37 (((par)&SC520_PAR_ADDR_MASK) << SC520_PAR_ADDR_SHIFT)
39 #define SC520_PAR_SIZE_MASK 0x01ffc000
40 #define SC520_PAR_SIZE_SHIFT 2
41 #define SC520_PAR_TO_SIZE(par) \
42 ((((par)&SC520_PAR_SIZE_MASK) << SC520_PAR_SIZE_SHIFT) + (64*1024))
44 #define SC520_PAR(cs, addr, size) \
46 ((((size)-(64*1024)) >> SC520_PAR_SIZE_SHIFT) & SC520_PAR_SIZE_MASK) | \
47 (((addr) >> SC520_PAR_ADDR_SHIFT) & SC520_PAR_ADDR_MASK))
49 #define SC520_PAR_BOOTCS 0x8a000000
50 #define SC520_PAR_ROMCS1 0xaa000000
51 #define SC520_PAR_ROMCS2 0xca000000 /* Cache disabled, 64K page */
53 static void *nettel_mmcrp
= NULL
;
55 #ifdef CONFIG_MTD_CFI_INTELEXT
56 static struct mtd_info
*intel_mtd
;
58 static struct mtd_info
*amd_mtd
;
60 /****************************************************************************/
62 /****************************************************************************/
64 #ifdef CONFIG_MTD_CFI_INTELEXT
65 static struct map_info nettel_intel_map
= {
66 .name
= "SnapGear Intel",
68 .bankwidth
= INTEL_BUSWIDTH
,
71 static struct mtd_partition nettel_intel_partitions
[] = {
73 .name
= "SnapGear kernel",
78 .name
= "SnapGear filesystem",
82 .name
= "SnapGear config",
87 .name
= "SnapGear Intel",
91 .name
= "SnapGear BIOS Config",
96 .name
= "SnapGear BIOS",
103 static struct map_info nettel_amd_map
= {
104 .name
= "SnapGear AMD",
105 .size
= AMD_WINDOW_MAXSIZE
,
106 .bankwidth
= AMD_BUSWIDTH
,
109 static struct mtd_partition nettel_amd_partitions
[] = {
111 .name
= "SnapGear BIOS config",
112 .offset
= 0x000e0000,
116 .name
= "SnapGear BIOS",
117 .offset
= 0x000f0000,
121 .name
= "SnapGear AMD",
125 .name
= "SnapGear high BIOS",
126 .offset
= 0x001f0000,
131 #define NUM_AMD_PARTITIONS \
132 (sizeof(nettel_amd_partitions)/sizeof(nettel_amd_partitions[0]))
134 /****************************************************************************/
136 #ifdef CONFIG_MTD_CFI_INTELEXT
139 * Set the Intel flash back to read mode since some old boot
142 static int nettel_reboot_notifier(struct notifier_block
*nb
, unsigned long val
, void *v
)
144 struct cfi_private
*cfi
= nettel_intel_map
.fldrv_priv
;
147 /* Make sure all FLASH chips are put back into read mode */
148 for (b
= 0; (b
< nettel_intel_partitions
[3].size
); b
+= 0x100000) {
149 cfi_send_gen_cmd(0xff, 0x55, b
, &nettel_intel_map
, cfi
,
150 cfi
->device_type
, NULL
);
155 static struct notifier_block nettel_notifier_block
= {
156 nettel_reboot_notifier
, NULL
, 0
160 * Erase the configuration file system.
161 * Used to support the software reset button.
163 static void nettel_erasecallback(struct erase_info
*done
)
165 wait_queue_head_t
*wait_q
= (wait_queue_head_t
*)done
->priv
;
169 static struct erase_info nettel_erase
;
171 int nettel_eraseconfig(void)
173 struct mtd_info
*mtd
;
174 DECLARE_WAITQUEUE(wait
, current
);
175 wait_queue_head_t wait_q
;
178 init_waitqueue_head(&wait_q
);
179 mtd
= get_mtd_device(NULL
, 2);
181 nettel_erase
.mtd
= mtd
;
182 nettel_erase
.callback
= nettel_erasecallback
;
183 nettel_erase
.callback
= NULL
;
184 nettel_erase
.addr
= 0;
185 nettel_erase
.len
= mtd
->size
;
186 nettel_erase
.priv
= (u_long
) &wait_q
;
187 nettel_erase
.priv
= 0;
189 set_current_state(TASK_INTERRUPTIBLE
);
190 add_wait_queue(&wait_q
, &wait
);
192 ret
= MTD_ERASE(mtd
, &nettel_erase
);
194 set_current_state(TASK_RUNNING
);
195 remove_wait_queue(&wait_q
, &wait
);
200 schedule(); /* Wait for erase to finish. */
201 remove_wait_queue(&wait_q
, &wait
);
211 int nettel_eraseconfig(void)
218 /****************************************************************************/
220 int __init
nettel_init(void)
222 volatile unsigned long *amdpar
;
223 unsigned long amdaddr
, maxsize
;
224 int num_amd_partitions
=0;
225 #ifdef CONFIG_MTD_CFI_INTELEXT
226 volatile unsigned long *intel0par
, *intel1par
;
227 unsigned long orig_bootcspar
, orig_romcs1par
;
228 unsigned long intel0addr
, intel0size
;
229 unsigned long intel1addr
, intel1size
;
230 int intelboot
, intel0cs
, intel1cs
;
231 int num_intel_partitions
;
235 nettel_mmcrp
= (void *) ioremap_nocache(0xfffef000, 4096);
236 if (nettel_mmcrp
== NULL
) {
237 printk("SNAPGEAR: failed to disable MMCR cache??\n");
241 /* Set CPU clock to be 33.000MHz */
242 *((unsigned char *) (nettel_mmcrp
+ 0xc64)) = 0x01;
244 amdpar
= (volatile unsigned long *) (nettel_mmcrp
+ 0xc4);
246 #ifdef CONFIG_MTD_CFI_INTELEXT
248 intel0cs
= SC520_PAR_ROMCS1
;
249 intel0par
= (volatile unsigned long *) (nettel_mmcrp
+ 0xc0);
250 intel1cs
= SC520_PAR_ROMCS2
;
251 intel1par
= (volatile unsigned long *) (nettel_mmcrp
+ 0xbc);
254 * Save the CS settings then ensure ROMCS1 and ROMCS2 are off,
255 * otherwise they might clash with where we try to map BOOTCS.
257 orig_bootcspar
= *amdpar
;
258 orig_romcs1par
= *intel0par
;
264 * The first thing to do is determine if we have a separate
265 * boot FLASH device. Typically this is a small (1 to 2MB)
266 * AMD FLASH part. It seems that device size is about the
267 * only way to tell if this is the case...
269 amdaddr
= 0x20000000;
270 maxsize
= AMD_WINDOW_MAXSIZE
;
272 *amdpar
= SC520_PAR(SC520_PAR_BOOTCS
, amdaddr
, maxsize
);
275 nettel_amd_map
.phys
= amdaddr
;
276 nettel_amd_map
.virt
= ioremap_nocache(amdaddr
, maxsize
);
277 if (!nettel_amd_map
.virt
) {
278 printk("SNAPGEAR: failed to ioremap() BOOTCS\n");
281 simple_map_init(&nettel_amd_map
);
283 if ((amd_mtd
= do_map_probe("jedec_probe", &nettel_amd_map
))) {
284 printk(KERN_NOTICE
"SNAPGEAR: AMD flash device size = %dK\n",
287 amd_mtd
->owner
= THIS_MODULE
;
289 /* The high BIOS partition is only present for 2MB units */
290 num_amd_partitions
= NUM_AMD_PARTITIONS
;
291 if (amd_mtd
->size
< AMD_WINDOW_MAXSIZE
)
292 num_amd_partitions
--;
293 /* Don't add the partition until after the primary INTEL's */
295 #ifdef CONFIG_MTD_CFI_INTELEXT
297 * Map the Intel flash into memory after the AMD
298 * It has to start on a multiple of maxsize.
300 maxsize
= SC520_PAR_TO_SIZE(orig_romcs1par
);
301 if (maxsize
< (32 * 1024 * 1024))
302 maxsize
= (32 * 1024 * 1024);
303 intel0addr
= amdaddr
+ maxsize
;
306 #ifdef CONFIG_MTD_CFI_INTELEXT
307 /* INTEL boot FLASH */
310 if (!orig_romcs1par
) {
311 intel0cs
= SC520_PAR_BOOTCS
;
312 intel0par
= (volatile unsigned long *)
313 (nettel_mmcrp
+ 0xc4);
314 intel1cs
= SC520_PAR_ROMCS1
;
315 intel1par
= (volatile unsigned long *)
316 (nettel_mmcrp
+ 0xc0);
318 intel0addr
= SC520_PAR_TO_ADDR(orig_bootcspar
);
319 maxsize
= SC520_PAR_TO_SIZE(orig_bootcspar
);
321 /* Kernel base is on ROMCS1, not BOOTCS */
322 intel0cs
= SC520_PAR_ROMCS1
;
323 intel0par
= (volatile unsigned long *)
324 (nettel_mmcrp
+ 0xc0);
325 intel1cs
= SC520_PAR_BOOTCS
;
326 intel1par
= (volatile unsigned long *)
327 (nettel_mmcrp
+ 0xc4);
329 intel0addr
= SC520_PAR_TO_ADDR(orig_romcs1par
);
330 maxsize
= SC520_PAR_TO_SIZE(orig_romcs1par
);
333 /* Destroy useless AMD MTD mapping */
335 iounmap(nettel_amd_map
.virt
);
336 nettel_amd_map
.virt
= NULL
;
338 /* Only AMD flash supported */
343 #ifdef CONFIG_MTD_CFI_INTELEXT
345 * We have determined the INTEL FLASH configuration, so lets
346 * go ahead and probe for them now.
349 /* Set PAR to the maximum size */
350 if (maxsize
< (32 * 1024 * 1024))
351 maxsize
= (32 * 1024 * 1024);
352 *intel0par
= SC520_PAR(intel0cs
, intel0addr
, maxsize
);
354 /* Turn other PAR off so the first probe doesn't find it */
357 /* Probe for the the size of the first Intel flash */
358 nettel_intel_map
.size
= maxsize
;
359 nettel_intel_map
.phys
= intel0addr
;
360 nettel_intel_map
.virt
= ioremap_nocache(intel0addr
, maxsize
);
361 if (!nettel_intel_map
.virt
) {
362 printk("SNAPGEAR: failed to ioremap() ROMCS1\n");
365 simple_map_init(&nettel_intel_map
);
367 intel_mtd
= do_map_probe("cfi_probe", &nettel_intel_map
);
369 iounmap(nettel_intel_map
.virt
);
373 /* Set PAR to the detected size */
374 intel0size
= intel_mtd
->size
;
375 *intel0par
= SC520_PAR(intel0cs
, intel0addr
, intel0size
);
378 * Map second Intel FLASH right after first. Set its size to the
379 * same maxsize used for the first Intel FLASH.
381 intel1addr
= intel0addr
+ intel0size
;
382 *intel1par
= SC520_PAR(intel1cs
, intel1addr
, maxsize
);
385 maxsize
+= intel0size
;
387 /* Delete the old map and probe again to do both chips */
388 map_destroy(intel_mtd
);
390 iounmap(nettel_intel_map
.virt
);
392 nettel_intel_map
.size
= maxsize
;
393 nettel_intel_map
.virt
= ioremap_nocache(intel0addr
, maxsize
);
394 if (!nettel_intel_map
.virt
) {
395 printk("SNAPGEAR: failed to ioremap() ROMCS1/2\n");
399 intel_mtd
= do_map_probe("cfi_probe", &nettel_intel_map
);
401 iounmap((void *) nettel_intel_map
.virt
);
405 intel1size
= intel_mtd
->size
- intel0size
;
406 if (intel1size
> 0) {
407 *intel1par
= SC520_PAR(intel1cs
, intel1addr
, intel1size
);
413 printk(KERN_NOTICE
"SNAPGEAR: Intel flash device size = %dK\n",
414 (intel_mtd
->size
>> 10));
416 intel_mtd
->owner
= THIS_MODULE
;
418 #ifndef CONFIG_BLK_DEV_INITRD
419 ROOT_DEV
= MKDEV(MTD_BLOCK_MAJOR
, 1);
422 num_intel_partitions
= sizeof(nettel_intel_partitions
) /
423 sizeof(nettel_intel_partitions
[0]);
427 * Adjust offset and size of last boot partition.
428 * Must allow for BIOS region at end of FLASH.
430 nettel_intel_partitions
[1].size
= (intel0size
+ intel1size
) -
431 (1024*1024 + intel_mtd
->erasesize
);
432 nettel_intel_partitions
[3].size
= intel0size
+ intel1size
;
433 nettel_intel_partitions
[4].offset
=
434 (intel0size
+ intel1size
) - intel_mtd
->erasesize
;
435 nettel_intel_partitions
[4].size
= intel_mtd
->erasesize
;
436 nettel_intel_partitions
[5].offset
=
437 nettel_intel_partitions
[4].offset
;
438 nettel_intel_partitions
[5].size
=
439 nettel_intel_partitions
[4].size
;
441 /* No BIOS regions when AMD boot */
442 num_intel_partitions
-= 2;
444 rc
= add_mtd_partitions(intel_mtd
, nettel_intel_partitions
,
445 num_intel_partitions
);
449 rc
= add_mtd_partitions(amd_mtd
, nettel_amd_partitions
,
453 #ifdef CONFIG_MTD_CFI_INTELEXT
454 register_reboot_notifier(&nettel_notifier_block
);
460 /****************************************************************************/
462 void __exit
nettel_cleanup(void)
464 #ifdef CONFIG_MTD_CFI_INTELEXT
465 unregister_reboot_notifier(&nettel_notifier_block
);
468 del_mtd_partitions(amd_mtd
);
469 map_destroy(amd_mtd
);
471 if (nettel_amd_map
.virt
) {
472 iounmap(nettel_amd_map
.virt
);
473 nettel_amd_map
.virt
= NULL
;
475 #ifdef CONFIG_MTD_CFI_INTELEXT
477 del_mtd_partitions(intel_mtd
);
478 map_destroy(intel_mtd
);
480 if (nettel_intel_map
.virt
) {
481 iounmap(nettel_intel_map
.virt
);
482 nettel_intel_map
.virt
= 0;
487 /****************************************************************************/
489 module_init(nettel_init
);
490 module_exit(nettel_cleanup
);
492 MODULE_LICENSE("GPL");
493 MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>");
494 MODULE_DESCRIPTION("SnapGear/SecureEdge FLASH support");
496 /****************************************************************************/