1 /******************************************************************************
3 * (C)Copyright 1998,1999 SysKonnect,
4 * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
6 * See the file "skfddi.c" for further information.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * The information in this file is provided "AS IS" without warranty.
15 ******************************************************************************/
19 Physical Connection Management
23 * Hardware independent state machine implemantation
24 * The following external SMT functions are referenced :
30 * The following external HW dependent functions are referenced :
35 * The following HW dependent events are required :
49 #include "h/supern_2.h"
51 #include "h/smtstate.h"
54 static const char ID_sccs
[] = "@(#)pcmplc.c 2.55 99/08/05 (C) SK " ;
58 extern int snmp_fddi_trap(
60 struct s_smc
* smc
, int type
, int index
65 extern int plc_is_installed(
76 #define GO_STATE(x) (mib->fddiPORTPCMState = (x)|AFLAG)
77 #define ACTIONS_DONE() (mib->fddiPORTPCMState &= ~AFLAG)
78 #define ACTIONS(x) (x|AFLAG)
96 * symbolic state names
98 static const char * const pcm_states
[] = {
99 "PC0_OFF","PC1_BREAK","PC2_TRACE","PC3_CONNECT","PC4_NEXT",
100 "PC5_SIGNAL","PC6_JOIN","PC7_VERIFY","PC8_ACTIVE","PC9_MAINT"
104 * symbolic event names
106 static const char * const pcm_events
[] = {
107 "NONE","PC_START","PC_STOP","PC_LOOP","PC_JOIN","PC_SIGNAL",
108 "PC_REJECT","PC_MAINT","PC_TRACE","PC_PDR",
109 "PC_ENABLE","PC_DISABLE",
110 "PC_QLS","PC_ILS","PC_MLS","PC_HLS","PC_LS_PDR","PC_LS_NONE",
111 "PC_TIMEOUT_TB_MAX","PC_TIMEOUT_TB_MIN",
112 "PC_TIMEOUT_C_MIN","PC_TIMEOUT_T_OUT",
113 "PC_TIMEOUT_TL_MIN","PC_TIMEOUT_T_NEXT","PC_TIMEOUT_LCT",
120 * PCL-S control register
121 * this register in the PLC-S controls the scrambling parameters
123 #define PLCS_CONTROL_C_U 0
124 #define PLCS_CONTROL_C_S (PL_C_SDOFF_ENABLE | PL_C_SDON_ENABLE | \
126 #define PLCS_FASSERT_U 0
127 #define PLCS_FASSERT_S 0xFd76 /* 52.0 us */
128 #define PLCS_FDEASSERT_U 0
129 #define PLCS_FDEASSERT_S 0
132 * PCL-S control register
133 * this register in the PLC-S controls the scrambling parameters
134 * can be patched for ANSI compliance if standard changes
136 static const u_char plcs_control_c_u
[17] = "PLC_CNTRL_C_U=\0\0" ;
137 static const u_char plcs_control_c_s
[17] = "PLC_CNTRL_C_S=\01\02" ;
139 #define PLCS_CONTROL_C_U (plcs_control_c_u[14] | (plcs_control_c_u[15]<<8))
140 #define PLCS_CONTROL_C_S (plcs_control_c_s[14] | (plcs_control_c_s[15]<<8))
141 #endif /* nMOT_ELM */
146 /* struct definition see 'cmtdef.h' (also used by CFM) */
157 #define LCT_LEM_MAX 255
160 * PLC timing parameter
163 #define PLC_MS(m) ((int)((0x10000L-(m*100000L/2048))))
164 #define SLOW_TL_MIN PLC_MS(6)
165 #define SLOW_C_MIN PLC_MS(10)
167 static const struct plt
{
168 int timer
; /* relative plc timer address */
169 int para
; /* default timing parameters */
171 { PL_C_MIN
, SLOW_C_MIN
}, /* min t. to remain Connect State */
172 { PL_TL_MIN
, SLOW_TL_MIN
}, /* min t. to transmit a Line State */
173 { PL_TB_MIN
, TP_TB_MIN
}, /* min break time */
174 { PL_T_OUT
, TP_T_OUT
}, /* Signaling timeout */
175 { PL_LC_LENGTH
, TP_LC_LENGTH
}, /* Link Confidence Test Time */
176 { PL_T_SCRUB
, TP_T_SCRUB
}, /* Scrub Time == MAC TVX time ! */
177 { PL_NS_MAX
, TP_NS_MAX
}, /* max t. that noise is tolerated */
186 * Do we need the EBUF error during signaling, too, to detect SUPERNET_3
189 static int plc_imsk_na
= PL_PCM_CODE
| PL_TRACE_PROP
| PL_PCM_BREAK
|
190 PL_PCM_ENABLED
| PL_SELF_TEST
| PL_EBUF_ERR
;
191 #else /* SUPERNET_3 */
193 * We do NOT need the elasticity buffer error during signaling.
195 static int plc_imsk_na
= PL_PCM_CODE
| PL_TRACE_PROP
| PL_PCM_BREAK
|
196 PL_PCM_ENABLED
| PL_SELF_TEST
;
197 #endif /* SUPERNET_3 */
198 static int plc_imsk_act
= PL_PCM_CODE
| PL_TRACE_PROP
| PL_PCM_BREAK
|
199 PL_PCM_ENABLED
| PL_SELF_TEST
| PL_EBUF_ERR
;
201 /* external functions */
202 void all_selection_criteria(struct s_smc
*smc
);
204 /* internal functions */
205 static void pcm_fsm(struct s_smc
*smc
, struct s_phy
*phy
, int cmd
);
206 static void pc_rcode_actions(struct s_smc
*smc
, int bit
, struct s_phy
*phy
);
207 static void pc_tcode_actions(struct s_smc
*smc
, const int bit
, struct s_phy
*phy
);
208 static void reset_lem_struct(struct s_phy
*phy
);
209 static void plc_init(struct s_smc
*smc
, int p
);
210 static void sm_ph_lem_start(struct s_smc
*smc
, int np
, int threshold
);
211 static void sm_ph_lem_stop(struct s_smc
*smc
, int np
);
212 static void sm_ph_linestate(struct s_smc
*smc
, int phy
, int ls
);
213 static void real_init_plc(struct s_smc
*smc
);
216 * SMT timer interface
219 static void start_pcm_timer0(struct s_smc
*smc
, u_long value
, int event
,
222 phy
->timer0_exp
= FALSE
; /* clear timer event flag */
223 smt_timer_start(smc
,&phy
->pcm_timer0
,value
,
224 EV_TOKEN(EVENT_PCM
+phy
->np
,event
)) ;
227 * SMT timer interface
230 static void stop_pcm_timer0(struct s_smc
*smc
, struct s_phy
*phy
)
232 if (phy
->pcm_timer0
.tm_active
)
233 smt_timer_stop(smc
,&phy
->pcm_timer0
) ;
237 init PCM state machine (called by driver)
238 clear all PCM vars and flags
240 void pcm_init(struct s_smc
*smc
)
245 struct fddi_mib_p
*mib
;
247 for (np
= 0,phy
= smc
->y
; np
< NUMPHYS
; np
++,phy
++) {
248 /* Indicates the type of PHY being used */
250 mib
->fddiPORTPCMState
= ACTIONS(PC0_OFF
) ;
252 switch (smc
->s
.sas
) {
255 mib
->fddiPORTMy_Type
= (np
== PS
) ? TS
: TM
;
258 mib
->fddiPORTMy_Type
= (np
== PA
) ? TA
:
259 (np
== PB
) ? TB
: TM
;
262 mib
->fddiPORTMy_Type
= TM
;
266 mib
->fddiPORTMy_Type
= (np
== PS
) ? TS
: TNONE
;
267 mib
->fddiPORTHardwarePresent
= (np
== PS
) ? TRUE
:
270 smc
->y
[PA
].mib
->fddiPORTPCMState
= PC0_OFF
;
272 smc
->y
[PB
].mib
->fddiPORTPCMState
= PC0_OFF
;
276 mib
->fddiPORTMy_Type
= (np
== PB
) ? TB
: TA
;
283 phy
->pmd_scramble
= 0 ;
284 switch (phy
->pmd_type
[PMD_SK_PMD
]) {
286 mib
->fddiPORTPMDClass
= MIB_PMDCLASS_MULTI
;
289 mib
->fddiPORTPMDClass
= MIB_PMDCLASS_LCF
;
292 mib
->fddiPORTPMDClass
= MIB_PMDCLASS_TP
;
295 mib
->fddiPORTPMDClass
= MIB_PMDCLASS_TP
;
296 phy
->pmd_scramble
= TRUE
;
299 mib
->fddiPORTPMDClass
= MIB_PMDCLASS_TP
;
300 phy
->pmd_scramble
= TRUE
;
303 mib
->fddiPORTPMDClass
= MIB_PMDCLASS_SINGLE1
;
306 mib
->fddiPORTPMDClass
= MIB_PMDCLASS_SINGLE2
;
309 mib
->fddiPORTPMDClass
= MIB_PMDCLASS_SINGLE2
;
312 mib
->fddiPORTPMDClass
= MIB_PMDCLASS_SINGLE1
;
315 mib
->fddiPORTPMDClass
= MIB_PMDCLASS_UNKNOWN
;
318 mib
->fddiPORTPMDClass
= MIB_PMDCLASS_TP
;
321 mib
->fddiPORTPMDClass
= MIB_PMDCLASS_TP
;
324 mib
->fddiPORTPMDClass
= MIB_PMDCLASS_UNKNOWN
;
328 * A and B port can be on primary and secondary path
330 switch (mib
->fddiPORTMy_Type
) {
332 mib
->fddiPORTAvailablePaths
|= MIB_PATH_S
;
333 mib
->fddiPORTRequestedPaths
[1] = MIB_P_PATH_LOCAL
;
334 mib
->fddiPORTRequestedPaths
[2] =
336 MIB_P_PATH_CON_ALTER
|
337 MIB_P_PATH_SEC_PREFER
;
338 mib
->fddiPORTRequestedPaths
[3] =
340 MIB_P_PATH_CON_ALTER
|
341 MIB_P_PATH_SEC_PREFER
|
345 mib
->fddiPORTAvailablePaths
|= MIB_PATH_S
;
346 mib
->fddiPORTRequestedPaths
[1] = MIB_P_PATH_LOCAL
;
347 mib
->fddiPORTRequestedPaths
[2] =
349 MIB_P_PATH_PRIM_PREFER
;
350 mib
->fddiPORTRequestedPaths
[3] =
352 MIB_P_PATH_PRIM_PREFER
|
353 MIB_P_PATH_CON_PREFER
|
357 mib
->fddiPORTAvailablePaths
|= MIB_PATH_S
;
358 mib
->fddiPORTRequestedPaths
[1] = MIB_P_PATH_LOCAL
;
359 mib
->fddiPORTRequestedPaths
[2] =
361 MIB_P_PATH_CON_ALTER
|
362 MIB_P_PATH_PRIM_PREFER
;
363 mib
->fddiPORTRequestedPaths
[3] =
365 MIB_P_PATH_CON_ALTER
|
366 MIB_P_PATH_PRIM_PREFER
;
369 mib
->fddiPORTRequestedPaths
[1] = MIB_P_PATH_LOCAL
;
370 mib
->fddiPORTRequestedPaths
[2] =
372 MIB_P_PATH_SEC_ALTER
|
373 MIB_P_PATH_PRIM_ALTER
;
374 mib
->fddiPORTRequestedPaths
[3] = 0 ;
378 phy
->pc_lem_fail
= FALSE
;
379 mib
->fddiPORTPCMStateX
= mib
->fddiPORTPCMState
;
380 mib
->fddiPORTLCTFail_Ct
= 0 ;
381 mib
->fddiPORTBS_Flag
= 0 ;
382 mib
->fddiPORTCurrentPath
= MIB_PATH_ISOLATED
;
383 mib
->fddiPORTNeighborType
= TNONE
;
389 phy
->phy_name
= '0' + np
- PM
;
391 phy
->phy_name
= 'A' + np
;
392 phy
->wc_flag
= FALSE
; /* set by SMT */
393 memset((char *)&phy
->lem
,0,sizeof(struct lem_counter
)) ;
394 reset_lem_struct(phy
) ;
395 memset((char *)&phy
->plc
,0,sizeof(struct s_plc
)) ;
396 phy
->plc
.p_state
= PS_OFF
;
397 for (i
= 0 ; i
< NUMBITS
; i
++) {
404 void init_plc(struct s_smc
*smc
)
410 * this is an obsolete public entry point that has to remain
411 * for compat. It is used by various drivers.
412 * the work is now done in real_init_plc()
413 * which is called from pcm_init() ;
417 static void real_init_plc(struct s_smc
*smc
)
421 for (p
= 0 ; p
< NUMPHYS
; p
++)
425 static void plc_init(struct s_smc
*smc
, int p
)
429 int rev
; /* Revision of PLC-x */
432 /* transit PCM state machine to MAINT state */
433 outpw(PLC(p
,PL_CNTRL_B
),0) ;
434 outpw(PLC(p
,PL_CNTRL_B
),PL_PCM_STOP
) ;
435 outpw(PLC(p
,PL_CNTRL_A
),0) ;
438 * if PLC-S then set control register C
441 rev
= inpw(PLC(p
,PL_STATUS_A
)) & PLC_REV_MASK
;
442 if (rev
!= PLC_REVISION_A
)
445 if (smc
->y
[p
].pmd_scramble
) {
446 outpw(PLC(p
,PL_CNTRL_C
),PLCS_CONTROL_C_S
) ;
448 outpw(PLC(p
,PL_T_FOT_ASS
),PLCS_FASSERT_S
) ;
449 outpw(PLC(p
,PL_T_FOT_DEASS
),PLCS_FDEASSERT_S
) ;
453 outpw(PLC(p
,PL_CNTRL_C
),PLCS_CONTROL_C_U
) ;
455 outpw(PLC(p
,PL_T_FOT_ASS
),PLCS_FASSERT_U
) ;
456 outpw(PLC(p
,PL_T_FOT_DEASS
),PLCS_FDEASSERT_U
) ;
464 for ( i
= 0 ; pltm
[i
].timer
; i
++) /* set timer parameter reg */
465 outpw(PLC(p
,pltm
[i
].timer
),pltm
[i
].para
) ;
467 (void)inpw(PLC(p
,PL_INTR_EVENT
)) ; /* clear interrupt event reg */
468 plc_clear_irq(smc
,p
) ;
469 outpw(PLC(p
,PL_INTR_MASK
),plc_imsk_na
); /* enable non active irq's */
472 * if PCM is configured for class s, it will NOT go to the
473 * REMOVE state if offline (page 3-36;)
474 * in the concentrator, all inactive PHYS always must be in
476 * there's no real need to use this feature at all ..
479 if ((smc
->s
.sas
== SMT_SAS
) && (p
== PS
)) {
480 outpw(PLC(p
,PL_CNTRL_B
),PL_CLASS_S
) ;
486 * control PCM state machine
488 static void plc_go_state(struct s_smc
*smc
, int p
, int state
)
495 port
= (HW_PTR
) (PLC(p
,PL_CNTRL_B
)) ;
496 val
= inpw(port
) & ~(PL_PCM_CNTRL
| PL_MAINT
) ;
498 outpw(port
,val
| state
) ;
502 * read current line state (called by ECM & PCM)
504 int sm_pm_get_ls(struct s_smc
*smc
, int phy
)
509 if (!plc_is_installed(smc
,phy
))
513 state
= inpw(PLC(phy
,PL_STATUS_A
)) & PL_LINE_ST
;
537 static int plc_send_bits(struct s_smc
*smc
, struct s_phy
*phy
, int len
)
539 int np
= phy
->np
; /* PHY index */
545 /* create bit vector */
546 for (i
= len
-1,n
= 0 ; i
>= 0 ; i
--) {
547 n
= (n
<<1) | phy
->t_val
[phy
->bitn
+i
] ;
549 if (inpw(PLC(np
,PL_STATUS_B
)) & PL_PCM_SIGNAL
) {
551 printf("PL_PCM_SIGNAL is set\n") ;
555 /* write bit[n] & length = 1 to regs */
556 outpw(PLC(np
,PL_VECTOR_LEN
),len
-1) ; /* len=nr-1 */
557 outpw(PLC(np
,PL_XMIT_VECTOR
),n
) ;
561 if (smc
->debug
.d_plc
& 0x80)
563 if (debug
.d_plc
& 0x80)
565 printf("SIGNALING bit %d .. %d\n",phy
->bitn
,phy
->bitn
+len
-1) ;
574 void plc_config_mux(struct s_smc
*smc
, int mux
)
576 if (smc
->s
.sas
!= SMT_DAS
)
578 if (mux
== MUX_WRAPB
) {
579 SETMASK(PLC(PA
,PL_CNTRL_B
),PL_CONFIG_CNTRL
,PL_CONFIG_CNTRL
) ;
580 SETMASK(PLC(PA
,PL_CNTRL_A
),PL_SC_REM_LOOP
,PL_SC_REM_LOOP
) ;
583 CLEAR(PLC(PA
,PL_CNTRL_B
),PL_CONFIG_CNTRL
) ;
584 CLEAR(PLC(PA
,PL_CNTRL_A
),PL_SC_REM_LOOP
) ;
586 CLEAR(PLC(PB
,PL_CNTRL_B
),PL_CONFIG_CNTRL
) ;
587 CLEAR(PLC(PB
,PL_CNTRL_A
),PL_SC_REM_LOOP
) ;
592 called by dispatcher & fddi_init() (driver)
598 void pcm(struct s_smc
*smc
, const int np
, int event
)
603 struct fddi_mib_p
*mib
;
607 * ignore 2nd PHY if SAS
609 if ((np
!= PS
) && (smc
->s
.sas
== SMT_SAS
))
614 oldstate
= mib
->fddiPORTPCMState
;
616 DB_PCM("PCM %c: state %s",
618 (mib
->fddiPORTPCMState
& AFLAG
) ? "ACTIONS " : "") ;
619 DB_PCM("%s, event %s\n",
620 pcm_states
[mib
->fddiPORTPCMState
& ~AFLAG
],
622 state
= mib
->fddiPORTPCMState
;
623 pcm_fsm(smc
,phy
,event
) ;
625 } while (state
!= mib
->fddiPORTPCMState
) ;
627 * because the PLC does the bit signaling for us,
628 * we're always in SIGNAL state
629 * the MIB want's to see CONNECT
630 * we therefore fake an entry in the MIB
632 if (state
== PC5_SIGNAL
)
633 mib
->fddiPORTPCMStateX
= PC3_CONNECT
;
635 mib
->fddiPORTPCMStateX
= state
;
641 if ( mib
->fddiPORTPCMState
!= oldstate
&&
642 ((oldstate
== PC8_ACTIVE
) || (mib
->fddiPORTPCMState
== PC8_ACTIVE
))) {
643 smt_srf_event(smc
,SMT_EVENT_PORT_PATH_CHANGE
,
644 (int) (INDEX_PORT
+ phy
->np
),0) ;
649 /* check whether a snmp-trap has to be sent */
651 if ( mib
->fddiPORTPCMState
!= oldstate
) {
652 /* a real state change took place */
653 DB_SNMP ("PCM from %d to %d\n", oldstate
, mib
->fddiPORTPCMState
);
654 if ( mib
->fddiPORTPCMState
== PC0_OFF
) {
655 /* send first trap */
656 snmp_fddi_trap (smc
, 1, (int) mib
->fddiPORTIndex
);
657 } else if ( oldstate
== PC0_OFF
) {
658 /* send second trap */
659 snmp_fddi_trap (smc
, 2, (int) mib
->fddiPORTIndex
);
660 } else if ( mib
->fddiPORTPCMState
!= PC2_TRACE
&&
661 oldstate
== PC8_ACTIVE
) {
662 /* send third trap */
663 snmp_fddi_trap (smc
, 3, (int) mib
->fddiPORTIndex
);
664 } else if ( mib
->fddiPORTPCMState
== PC8_ACTIVE
) {
665 /* send fourth trap */
666 snmp_fddi_trap (smc
, 4, (int) mib
->fddiPORTIndex
);
671 pcm_state_change(smc
,np
,state
) ;
677 static void pcm_fsm(struct s_smc
*smc
, struct s_phy
*phy
, int cmd
)
680 int np
= phy
->np
; /* PHY index */
682 struct fddi_mib_p
*mib
;
684 u_short plc_rev
; /* Revision of the plc */
685 #endif /* nMOT_ELM */
691 * general transitions independent of state
696 if (mib
->fddiPORTPCMState
!= PC9_MAINT
) {
698 AIX_EVENT(smc
, (u_long
) FDDI_RING_STATUS
, (u_long
)
699 FDDI_PORT_EVENT
, (u_long
) FDDI_PORT_STOP
,
700 smt_get_port_event_word(smc
));
705 if (mib
->fddiPORTPCMState
!= PC9_MAINT
)
706 GO_STATE(PC1_BREAK
) ;
710 GO_STATE(PC9_MAINT
) ;
711 AIX_EVENT(smc
, (u_long
) FDDI_RING_STATUS
, (u_long
)
712 FDDI_PORT_EVENT
, (u_long
) FDDI_PORT_DISABLED
,
713 smt_get_port_event_word(smc
));
715 case PC_TIMEOUT_LCT
:
716 /* if long or extended LCT */
717 stop_pcm_timer0(smc
,phy
) ;
718 CLEAR(PLC(np
,PL_CNTRL_B
),PL_LONG
) ;
719 /* end of LCT is indicate by PCM_CODE (initiate PCM event) */
723 switch(mib
->fddiPORTPCMState
) {
724 case ACTIONS(PC0_OFF
) :
725 stop_pcm_timer0(smc
,phy
) ;
726 outpw(PLC(np
,PL_CNTRL_A
),0) ;
727 CLEAR(PLC(np
,PL_CNTRL_B
),PL_PC_JOIN
) ;
728 CLEAR(PLC(np
,PL_CNTRL_B
),PL_LONG
) ;
729 sm_ph_lem_stop(smc
,np
) ; /* disable LEM */
730 phy
->cf_loop
= FALSE
;
731 phy
->cf_join
= FALSE
;
732 queue_event(smc
,EVENT_CFM
,CF_JOIN
+np
) ;
733 plc_go_state(smc
,np
,PL_PCM_STOP
) ;
734 mib
->fddiPORTConnectState
= PCM_DISABLED
;
739 if (cmd
== PC_MAINT
) {
740 GO_STATE(PC9_MAINT
) ;
744 case ACTIONS(PC1_BREAK
) :
745 /* Stop the LCT timer if we came from Signal state */
746 stop_pcm_timer0(smc
,phy
) ;
748 plc_go_state(smc
,np
,0) ;
749 CLEAR(PLC(np
,PL_CNTRL_B
),PL_PC_JOIN
) ;
750 CLEAR(PLC(np
,PL_CNTRL_B
),PL_LONG
) ;
751 sm_ph_lem_stop(smc
,np
) ; /* disable LEM */
753 * if vector is already loaded, go to OFF to clear PCM_SIGNAL
756 if (inpw(PLC(np
,PL_STATUS_B
)) & PL_PCM_SIGNAL
) {
757 plc_go_state(smc
,np
,PL_PCM_STOP
) ;
762 * Go to OFF state in any case.
764 plc_go_state(smc
,np
,PL_PCM_STOP
) ;
766 if (mib
->fddiPORTPC_Withhold
== PC_WH_NONE
)
767 mib
->fddiPORTConnectState
= PCM_CONNECTING
;
768 phy
->cf_loop
= FALSE
;
769 phy
->cf_join
= FALSE
;
770 queue_event(smc
,EVENT_CFM
,CF_JOIN
+np
) ;
771 phy
->ls_flag
= FALSE
;
772 phy
->pc_mode
= PM_NONE
; /* needed by CFM */
773 phy
->bitn
= 0 ; /* bit signaling start bit */
774 for (i
= 0 ; i
< 3 ; i
++)
775 pc_tcode_actions(smc
,i
,phy
) ;
777 /* Set the non-active interrupt mask register */
778 outpw(PLC(np
,PL_INTR_MASK
),plc_imsk_na
) ;
781 * If the LCT was stopped. There might be a
782 * PCM_CODE interrupt event present.
783 * This must be cleared.
785 (void)inpw(PLC(np
,PL_INTR_EVENT
)) ;
787 /* Get the plc revision for revision dependent code */
788 plc_rev
= inpw(PLC(np
,PL_STATUS_A
)) & PLC_REV_MASK
;
790 if (plc_rev
!= PLC_REV_SN3
)
794 * No supernet III PLC, so set Xmit verctor and
795 * length BEFORE starting the state machine.
797 if (plc_send_bits(smc
,phy
,3)) {
803 * Now give the Start command.
804 * - The start command shall be done before setting the bits
805 * to be signaled. (In PLC-S description and PLCS in SN3.
806 * - The start command shall be issued AFTER setting the
807 * XMIT vector and the XMIT length register.
809 * We do it exactly according this specs for the old PLC and
810 * the new PLCS inside the SN3.
811 * For the usual PLCS we try it the way it is done for the
812 * old PLC and set the XMIT registers again, if the PLC is
813 * not in SIGNAL state. This is done according to an PLCS
817 plc_go_state(smc
,np
,PL_PCM_START
) ;
820 * workaround for PLC-S eng. sample errata
823 if (!(inpw(PLC(np
,PL_STATUS_B
)) & PL_PCM_SIGNAL
))
825 if (((inpw(PLC(np
,PL_STATUS_A
)) & PLC_REV_MASK
) !=
827 !(inpw(PLC(np
,PL_STATUS_B
)) & PL_PCM_SIGNAL
))
828 #endif /* nMOT_ELM */
831 * Set register again (PLCS errata) or the first time
834 (void) plc_send_bits(smc
,phy
,3) ;
840 GO_STATE(PC5_SIGNAL
) ;
841 plc
->p_state
= PS_BIT3
;
848 case ACTIONS(PC2_TRACE
) :
849 plc_go_state(smc
,np
,PL_PCM_TRACE
) ;
855 case PC3_CONNECT
: /* these states are done by hardware */
859 case ACTIONS(PC5_SIGNAL
) :
862 if ((cmd
!= PC_SIGNAL
) && (cmd
!= PC_TIMEOUT_LCT
))
864 switch (plc
->p_state
) {
866 for (i
= 0 ; i
<= 2 ; i
++)
867 pc_rcode_actions(smc
,i
,phy
) ;
868 pc_tcode_actions(smc
,3,phy
) ;
869 plc
->p_state
= PS_BIT4
;
873 if (plc_send_bits(smc
,phy
,1)) {
878 pc_rcode_actions(smc
,3,phy
) ;
879 for (i
= 4 ; i
<= 6 ; i
++)
880 pc_tcode_actions(smc
,i
,phy
) ;
881 plc
->p_state
= PS_BIT7
;
885 if (plc_send_bits(smc
,phy
,3)) {
890 for (i
= 3 ; i
<= 6 ; i
++)
891 pc_rcode_actions(smc
,i
,phy
) ;
892 plc
->p_state
= PS_LCT
;
896 sm_ph_lem_start(smc
,np
,(int)smc
->s
.lct_short
) ; /* enable LEM */
898 i
= inpw(PLC(np
,PL_CNTRL_B
)) & ~PL_PC_LOOP
;
899 outpw(PLC(np
,PL_CNTRL_B
),i
) ; /* must be cleared */
900 outpw(PLC(np
,PL_CNTRL_B
),i
| PL_RLBP
) ;
903 /* check for local LCT failure */
904 pc_tcode_actions(smc
,7,phy
) ;
908 plc
->p_state
= PS_BIT8
;
912 if (plc_send_bits(smc
,phy
,1)) {
917 /* check for remote LCT failure */
918 pc_rcode_actions(smc
,7,phy
) ;
919 if (phy
->t_val
[7] || phy
->r_val
[7]) {
920 plc_go_state(smc
,np
,PL_PCM_STOP
) ;
921 GO_STATE(PC1_BREAK
) ;
924 for (i
= 8 ; i
<= 9 ; i
++)
925 pc_tcode_actions(smc
,i
,phy
) ;
926 plc
->p_state
= PS_JOIN
;
930 if (plc_send_bits(smc
,phy
,2)) {
935 for (i
= 8 ; i
<= 9 ; i
++)
936 pc_rcode_actions(smc
,i
,phy
) ;
937 plc
->p_state
= PS_ACTIVE
;
943 case ACTIONS(PC6_JOIN
) :
945 * prevent mux error when going from WRAP_A to WRAP_B
947 if (smc
->s
.sas
== SMT_DAS
&& np
== PB
&&
948 (smc
->y
[PA
].pc_mode
== PM_TREE
||
949 smc
->y
[PB
].pc_mode
== PM_TREE
)) {
950 SETMASK(PLC(np
,PL_CNTRL_A
),
951 PL_SC_REM_LOOP
,PL_SC_REM_LOOP
) ;
952 SETMASK(PLC(np
,PL_CNTRL_B
),
953 PL_CONFIG_CNTRL
,PL_CONFIG_CNTRL
) ;
955 SETMASK(PLC(np
,PL_CNTRL_B
),PL_PC_JOIN
,PL_PC_JOIN
) ;
956 SETMASK(PLC(np
,PL_CNTRL_B
),PL_PC_JOIN
,PL_PC_JOIN
) ;
961 switch (plc
->p_state
) {
965 phy
->cf_join
= TRUE
;
966 queue_event(smc
,EVENT_CFM
,CF_JOIN
+np
) ; ;
969 GO_STATE(PC8_ACTIVE
) ;
971 if (cmd
== PC_TRACE
) {
972 GO_STATE(PC2_TRACE
) ;
982 case ACTIONS(PC8_ACTIVE
) :
986 sm_ph_lem_start(smc
,(int)phy
->np
,LCT_LEM_MAX
) ;
988 phy
->tr_flag
= FALSE
;
989 mib
->fddiPORTConnectState
= PCM_ACTIVE
;
991 /* Set the active interrupt mask register */
992 outpw(PLC(np
,PL_INTR_MASK
),plc_imsk_act
) ;
997 /*PC81 is done by PL_TNE_EXPIRED irq */
999 if (cmd
== PC_TRACE
) {
1000 GO_STATE(PC2_TRACE
) ;
1003 /*PC88c: is done by TRACE_PROP irq */
1006 case ACTIONS(PC9_MAINT
) :
1007 stop_pcm_timer0(smc
,phy
) ;
1008 CLEAR(PLC(np
,PL_CNTRL_B
),PL_PC_JOIN
) ;
1009 CLEAR(PLC(np
,PL_CNTRL_B
),PL_LONG
) ;
1010 CLEAR(PLC(np
,PL_INTR_MASK
),PL_LE_CTR
) ; /* disable LEM int. */
1011 sm_ph_lem_stop(smc
,np
) ; /* disable LEM */
1012 phy
->cf_loop
= FALSE
;
1013 phy
->cf_join
= FALSE
;
1014 queue_event(smc
,EVENT_CFM
,CF_JOIN
+np
) ;
1015 plc_go_state(smc
,np
,PL_PCM_STOP
) ;
1016 mib
->fddiPORTConnectState
= PCM_DISABLED
;
1017 SETMASK(PLC(np
,PL_CNTRL_B
),PL_MAINT
,PL_MAINT
) ;
1018 sm_ph_linestate(smc
,np
,(int) MIB2LS(mib
->fddiPORTMaint_LS
)) ;
1019 outpw(PLC(np
,PL_CNTRL_A
),PL_SC_BYPASS
) ;
1023 DB_PCMN(1,"PCM %c : MAINT\n",phy
->phy_name
,0) ;
1025 if (cmd
== PC_ENABLE
) {
1032 SMT_PANIC(smc
,SMT_E0118
, SMT_E0118_MSG
) ;
1038 * force line state on a PHY output (only in MAINT state)
1040 static void sm_ph_linestate(struct s_smc
*smc
, int phy
, int ls
)
1046 cntrl
= (inpw(PLC(phy
,PL_CNTRL_B
)) & ~PL_MAINT_LS
) |
1047 PL_PCM_STOP
| PL_MAINT
;
1049 case PC_QLS
: /* Force Quiet */
1050 cntrl
|= PL_M_QUI0
;
1052 case PC_MLS
: /* Force Master */
1053 cntrl
|= PL_M_MASTR
;
1055 case PC_HLS
: /* Force Halt */
1056 cntrl
|= PL_M_HALT
;
1059 case PC_ILS
: /* Force Idle */
1060 cntrl
|= PL_M_IDLE
;
1062 case PC_LS_PDR
: /* Enable repeat filter */
1063 cntrl
|= PL_M_TPDR
;
1066 outpw(PLC(phy
,PL_CNTRL_B
),cntrl
) ;
1069 static void reset_lem_struct(struct s_phy
*phy
)
1071 struct lem_counter
*lem
= &phy
->lem
;
1073 phy
->mib
->fddiPORTLer_Estimate
= 15 ;
1074 lem
->lem_float_ber
= 15 * 100 ;
1078 * link error monitor
1080 static void lem_evaluate(struct s_smc
*smc
, struct s_phy
*phy
)
1084 struct lem_counter
*lem
= &phy
->lem
;
1085 struct fddi_mib_p
*mib
;
1093 errors
= inpw(PLC(((int) phy
->np
),PL_LINK_ERR_CTR
)) ;
1094 lem
->lem_errors
+= errors
;
1095 mib
->fddiPORTLem_Ct
+= errors
;
1097 errors
= lem
->lem_errors
;
1099 * calculation is called on a intervall of 8 seconds
1100 * -> this means, that one error in 8 sec. is one of 8*125*10E6
1101 * the same as BER = 10E-9
1103 * -> 9 errors in 8 seconds mean:
1104 * BER = 9 * 10E-9 and this is
1105 * < 10E-8, so the limit of 10E-8 is not reached!
1108 if (!errors
) ber
= 15 ;
1109 else if (errors
<= 9) ber
= 9 ;
1110 else if (errors
<= 99) ber
= 8 ;
1111 else if (errors
<= 999) ber
= 7 ;
1112 else if (errors
<= 9999) ber
= 6 ;
1113 else if (errors
<= 99999) ber
= 5 ;
1114 else if (errors
<= 999999) ber
= 4 ;
1115 else if (errors
<= 9999999) ber
= 3 ;
1116 else if (errors
<= 99999999) ber
= 2 ;
1117 else if (errors
<= 999999999) ber
= 1 ;
1124 lem
->lem_float_ber
= lem
->lem_float_ber
* 7 + ber
* 3 ;
1125 lem
->lem_float_ber
/= 10 ;
1126 mib
->fddiPORTLer_Estimate
= lem
->lem_float_ber
/ 100 ;
1127 if (mib
->fddiPORTLer_Estimate
< 4) {
1128 mib
->fddiPORTLer_Estimate
= 4 ;
1131 if (lem
->lem_errors
) {
1132 DB_PCMN(1,"LEM %c :\n",phy
->np
== PB
? 'B' : 'A',0) ;
1133 DB_PCMN(1,"errors : %ld\n",lem
->lem_errors
,0) ;
1134 DB_PCMN(1,"sum_errors : %ld\n",mib
->fddiPORTLem_Ct
,0) ;
1135 DB_PCMN(1,"current BER : 10E-%d\n",ber
/100,0) ;
1136 DB_PCMN(1,"float BER : 10E-(%d/100)\n",lem
->lem_float_ber
,0) ;
1137 DB_PCMN(1,"avg. BER : 10E-%d\n",
1138 mib
->fddiPORTLer_Estimate
,0) ;
1141 lem
->lem_errors
= 0L ;
1144 cond
= (mib
->fddiPORTLer_Estimate
<= mib
->fddiPORTLer_Alarm
) ?
1146 #ifdef SMT_EXT_CUTOFF
1147 smt_ler_alarm_check(smc
,phy
,cond
) ;
1148 #endif /* nSMT_EXT_CUTOFF */
1149 if (cond
!= mib
->fddiPORTLerFlag
) {
1150 smt_srf_event(smc
,SMT_COND_PORT_LER
,
1151 (int) (INDEX_PORT
+ phy
->np
) ,cond
) ;
1155 if ( mib
->fddiPORTLer_Estimate
<= mib
->fddiPORTLer_Cutoff
) {
1156 phy
->pc_lem_fail
= TRUE
; /* flag */
1157 mib
->fddiPORTLem_Reject_Ct
++ ;
1159 * "forgive 10e-2" if we cutoff so we can come
1162 lem
->lem_float_ber
+= 2*100 ;
1166 DB_PCMN(1,"PCM: LER cutoff on port %d cutoff %d\n",
1167 phy
->np
, mib
->fddiPORTLer_Cutoff
) ;
1169 #ifdef SMT_EXT_CUTOFF
1170 smt_port_off_event(smc
,phy
->np
);
1171 #else /* nSMT_EXT_CUTOFF */
1172 queue_event(smc
,(int)(EVENT_PCM
+phy
->np
),PC_START
) ;
1173 #endif /* nSMT_EXT_CUTOFF */
1178 * called by SMT to calculate LEM bit error rate
1180 void sm_lem_evaluate(struct s_smc
*smc
)
1184 for (np
= 0 ; np
< NUMPHYS
; np
++)
1185 lem_evaluate(smc
,&smc
->y
[np
]) ;
1188 static void lem_check_lct(struct s_smc
*smc
, struct s_phy
*phy
)
1190 struct lem_counter
*lem
= &phy
->lem
;
1191 struct fddi_mib_p
*mib
;
1196 phy
->pc_lem_fail
= FALSE
; /* flag */
1197 errors
= inpw(PLC(((int)phy
->np
),PL_LINK_ERR_CTR
)) ;
1198 lem
->lem_errors
+= errors
;
1199 mib
->fddiPORTLem_Ct
+= errors
;
1200 if (lem
->lem_errors
) {
1201 switch(phy
->lc_test
) {
1203 if (lem
->lem_errors
>= smc
->s
.lct_short
)
1204 phy
->pc_lem_fail
= TRUE
;
1207 if (lem
->lem_errors
>= smc
->s
.lct_medium
)
1208 phy
->pc_lem_fail
= TRUE
;
1211 if (lem
->lem_errors
>= smc
->s
.lct_long
)
1212 phy
->pc_lem_fail
= TRUE
;
1215 if (lem
->lem_errors
>= smc
->s
.lct_extended
)
1216 phy
->pc_lem_fail
= TRUE
;
1219 DB_PCMN(1," >>errors : %d\n",lem
->lem_errors
,0) ;
1221 if (phy
->pc_lem_fail
) {
1222 mib
->fddiPORTLCTFail_Ct
++ ;
1223 mib
->fddiPORTLem_Reject_Ct
++ ;
1226 mib
->fddiPORTLCTFail_Ct
= 0 ;
1232 static void sm_ph_lem_start(struct s_smc
*smc
, int np
, int threshold
)
1234 struct lem_counter
*lem
= &smc
->y
[np
].lem
;
1237 lem
->lem_errors
= 0L ;
1239 /* Do NOT reset mib->fddiPORTLer_Estimate here. It is called too
1243 outpw(PLC(np
,PL_LE_THRESHOLD
),threshold
) ;
1244 (void)inpw(PLC(np
,PL_LINK_ERR_CTR
)) ; /* clear error counter */
1247 SETMASK(PLC(np
,PL_INTR_MASK
),PL_LE_CTR
,PL_LE_CTR
) ;
1250 static void sm_ph_lem_stop(struct s_smc
*smc
, int np
)
1252 struct lem_counter
*lem
= &smc
->y
[np
].lem
;
1255 CLEAR(PLC(np
,PL_INTR_MASK
),PL_LE_CTR
) ;
1259 void sm_pm_ls_latch(struct s_smc
*smc
, int phy
, int on_off
)
1260 /* int on_off; en- or disable ident. ls */
1264 phy
= phy
; on_off
= on_off
;
1270 * receive actions are called AFTER the bit n is received,
1271 * i.e. if pc_rcode_actions(5) is called, bit 6 is the next bit to be received
1275 * PCM pseudo code 5.1 .. 6.1
1277 static void pc_rcode_actions(struct s_smc
*smc
, int bit
, struct s_phy
*phy
)
1279 struct fddi_mib_p
*mib
;
1283 DB_PCMN(1,"SIG rec %x %x: \n", bit
,phy
->r_val
[bit
] ) ;
1292 if (phy
->r_val
[1] == 0 && phy
->r_val
[2] == 0)
1293 mib
->fddiPORTNeighborType
= TA
;
1294 else if (phy
->r_val
[1] == 0 && phy
->r_val
[2] == 1)
1295 mib
->fddiPORTNeighborType
= TB
;
1296 else if (phy
->r_val
[1] == 1 && phy
->r_val
[2] == 0)
1297 mib
->fddiPORTNeighborType
= TS
;
1298 else if (phy
->r_val
[1] == 1 && phy
->r_val
[2] == 1)
1299 mib
->fddiPORTNeighborType
= TM
;
1302 if (mib
->fddiPORTMy_Type
== TM
&&
1303 mib
->fddiPORTNeighborType
== TM
) {
1304 DB_PCMN(1,"PCM %c : E100 withhold M-M\n",
1306 mib
->fddiPORTPC_Withhold
= PC_WH_M_M
;
1307 RS_SET(smc
,RS_EVENT
) ;
1309 else if (phy
->t_val
[3] || phy
->r_val
[3]) {
1310 mib
->fddiPORTPC_Withhold
= PC_WH_NONE
;
1311 if (mib
->fddiPORTMy_Type
== TM
||
1312 mib
->fddiPORTNeighborType
== TM
)
1313 phy
->pc_mode
= PM_TREE
;
1315 phy
->pc_mode
= PM_PEER
;
1317 /* reevaluate the selection criteria (wc_flag) */
1318 all_selection_criteria (smc
);
1321 mib
->fddiPORTPC_Withhold
= PC_WH_PATH
;
1325 mib
->fddiPORTPC_Withhold
= PC_WH_OTHER
;
1326 RS_SET(smc
,RS_EVENT
) ;
1327 DB_PCMN(1,"PCM %c : E101 withhold other\n",
1330 phy
->twisted
= ((mib
->fddiPORTMy_Type
!= TS
) &&
1331 (mib
->fddiPORTMy_Type
!= TM
) &&
1332 (mib
->fddiPORTNeighborType
==
1333 mib
->fddiPORTMy_Type
)) ;
1335 DB_PCMN(1,"PCM %c : E102 !!! TWISTED !!!\n",
1342 if (phy
->t_val
[4] || phy
->r_val
[4]) {
1343 if ((phy
->t_val
[4] && phy
->t_val
[5]) ||
1344 (phy
->r_val
[4] && phy
->r_val
[5]) )
1345 phy
->lc_test
= LC_EXTENDED
;
1347 phy
->lc_test
= LC_LONG
;
1349 else if (phy
->t_val
[5] || phy
->r_val
[5])
1350 phy
->lc_test
= LC_MEDIUM
;
1352 phy
->lc_test
= LC_SHORT
;
1353 switch (phy
->lc_test
) {
1354 case LC_SHORT
: /* 50ms */
1355 outpw(PLC((int)phy
->np
,PL_LC_LENGTH
), TP_LC_LENGTH
) ;
1356 phy
->t_next
[7] = smc
->s
.pcm_lc_short
;
1358 case LC_MEDIUM
: /* 500ms */
1359 outpw(PLC((int)phy
->np
,PL_LC_LENGTH
), TP_LC_LONGLN
) ;
1360 phy
->t_next
[7] = smc
->s
.pcm_lc_medium
;
1363 SETMASK(PLC((int)phy
->np
,PL_CNTRL_B
),PL_LONG
,PL_LONG
) ;
1364 phy
->t_next
[7] = smc
->s
.pcm_lc_long
;
1367 SETMASK(PLC((int)phy
->np
,PL_CNTRL_B
),PL_LONG
,PL_LONG
) ;
1368 phy
->t_next
[7] = smc
->s
.pcm_lc_extended
;
1371 if (phy
->t_next
[7] > smc
->s
.pcm_lc_medium
) {
1372 start_pcm_timer0(smc
,phy
->t_next
[7],PC_TIMEOUT_LCT
,phy
);
1374 DB_PCMN(1,"LCT timer = %ld us\n", phy
->t_next
[7], 0) ;
1375 phy
->t_next
[9] = smc
->s
.pcm_t_next_9
;
1378 if (phy
->t_val
[6]) {
1379 phy
->cf_loop
= TRUE
;
1381 phy
->td_flag
= TRUE
;
1384 if (phy
->t_val
[7] || phy
->r_val
[7]) {
1385 DB_PCMN(1,"PCM %c : E103 LCT fail %s\n",
1386 phy
->phy_name
,phy
->t_val
[7]? "local":"remote") ;
1387 queue_event(smc
,(int)(EVENT_PCM
+phy
->np
),PC_START
) ;
1391 if (phy
->t_val
[8] || phy
->r_val
[8]) {
1393 phy
->cf_loop
= TRUE
;
1394 phy
->td_flag
= TRUE
;
1398 if (phy
->r_val
[9]) {
1399 /* neighbor intends to have MAC on output */ ;
1400 mib
->fddiPORTMacIndicated
.R_val
= TRUE
;
1403 /* neighbor does not intend to have MAC on output */ ;
1404 mib
->fddiPORTMacIndicated
.R_val
= FALSE
;
1411 * PCM pseudo code 5.1 .. 6.1
1413 static void pc_tcode_actions(struct s_smc
*smc
, const int bit
, struct s_phy
*phy
)
1416 struct fddi_mib_p
*mib
;
1422 phy
->t_val
[0] = 0 ; /* no escape used */
1425 if (mib
->fddiPORTMy_Type
== TS
|| mib
->fddiPORTMy_Type
== TM
)
1431 if (mib
->fddiPORTMy_Type
== TB
|| mib
->fddiPORTMy_Type
== TM
)
1441 type
= mib
->fddiPORTMy_Type
;
1442 ne
= mib
->fddiPORTNeighborType
;
1443 policy
= smc
->mib
.fddiSMTConnectionPolicy
;
1445 phy
->t_val
[3] = 1 ; /* Accept connection */
1449 ((policy
& POLICY_AA
) && ne
== TA
) ||
1450 ((policy
& POLICY_AB
) && ne
== TB
) ||
1451 ((policy
& POLICY_AS
) && ne
== TS
) ||
1452 ((policy
& POLICY_AM
) && ne
== TM
) )
1453 phy
->t_val
[3] = 0 ; /* Reject */
1457 ((policy
& POLICY_BA
) && ne
== TA
) ||
1458 ((policy
& POLICY_BB
) && ne
== TB
) ||
1459 ((policy
& POLICY_BS
) && ne
== TS
) ||
1460 ((policy
& POLICY_BM
) && ne
== TM
) )
1461 phy
->t_val
[3] = 0 ; /* Reject */
1465 ((policy
& POLICY_SA
) && ne
== TA
) ||
1466 ((policy
& POLICY_SB
) && ne
== TB
) ||
1467 ((policy
& POLICY_SS
) && ne
== TS
) ||
1468 ((policy
& POLICY_SM
) && ne
== TM
) )
1469 phy
->t_val
[3] = 0 ; /* Reject */
1473 ((policy
& POLICY_MA
) && ne
== TA
) ||
1474 ((policy
& POLICY_MB
) && ne
== TB
) ||
1475 ((policy
& POLICY_MS
) && ne
== TS
) ||
1476 ((policy
& POLICY_MM
) && ne
== TM
) )
1477 phy
->t_val
[3] = 0 ; /* Reject */
1482 * detect undesirable connection attempt event
1484 if ( (type
== TA
&& ne
== TA
) ||
1485 (type
== TA
&& ne
== TS
) ||
1486 (type
== TB
&& ne
== TB
) ||
1487 (type
== TB
&& ne
== TS
) ||
1488 (type
== TS
&& ne
== TA
) ||
1489 (type
== TS
&& ne
== TB
) ) {
1490 smt_srf_event(smc
,SMT_EVENT_PORT_CONNECTION
,
1491 (int) (INDEX_PORT
+ phy
->np
) ,0) ;
1497 if (mib
->fddiPORTPC_Withhold
== PC_WH_NONE
) {
1498 if (phy
->pc_lem_fail
) {
1499 phy
->t_val
[4] = 1 ; /* long */
1504 if (mib
->fddiPORTLCTFail_Ct
> 0)
1505 phy
->t_val
[5] = 1 ; /* medium */
1507 phy
->t_val
[5] = 0 ; /* short */
1510 * Implementers choice: use medium
1511 * instead of short when undesired
1512 * connection attempt is made.
1515 phy
->t_val
[5] = 1 ; /* medium */
1517 mib
->fddiPORTConnectState
= PCM_CONNECTING
;
1520 mib
->fddiPORTConnectState
= PCM_STANDBY
;
1521 phy
->t_val
[4] = 1 ; /* extended */
1528 /* we do NOT have a MAC for LCT */
1532 phy
->cf_loop
= FALSE
;
1533 lem_check_lct(smc
,phy
) ;
1534 if (phy
->pc_lem_fail
) {
1535 DB_PCMN(1,"PCM %c : E104 LCT failed\n",
1543 phy
->t_val
[8] = 0 ; /* Don't request MAC loopback */
1547 if ((mib
->fddiPORTPC_Withhold
!= PC_WH_NONE
) ||
1548 ((smc
->s
.sas
== SMT_DAS
) && (phy
->wc_flag
))) {
1549 queue_event(smc
,EVENT_PCM
+np
,PC_START
) ;
1552 phy
->t_val
[9] = FALSE
;
1553 switch (smc
->s
.sas
) {
1556 * MAC intended on output
1558 if (phy
->pc_mode
== PM_TREE
) {
1559 if ((np
== PB
) || ((np
== PA
) &&
1560 (smc
->y
[PB
].mib
->fddiPORTConnectState
!=
1562 phy
->t_val
[9] = TRUE
;
1566 phy
->t_val
[9] = TRUE
;
1571 phy
->t_val
[9] = TRUE
;
1576 * MAC intended on output
1579 phy
->t_val
[9] = TRUE
;
1583 mib
->fddiPORTMacIndicated
.T_val
= phy
->t_val
[9] ;
1586 DB_PCMN(1,"SIG snd %x %x: \n", bit
,phy
->t_val
[bit
] ) ;
1590 * return status twisted (called by SMT)
1592 int pcm_status_twisted(struct s_smc
*smc
)
1595 if (smc
->s
.sas
!= SMT_DAS
)
1597 if (smc
->y
[PA
].twisted
&& (smc
->y
[PA
].mib
->fddiPORTPCMState
== PC8_ACTIVE
))
1599 if (smc
->y
[PB
].twisted
&& (smc
->y
[PB
].mib
->fddiPORTPCMState
== PC8_ACTIVE
))
1605 * return status (called by SMT)
1611 void pcm_status_state(struct s_smc
*smc
, int np
, int *type
, int *state
,
1612 int *remote
, int *mac
)
1614 struct s_phy
*phy
= &smc
->y
[np
] ;
1615 struct fddi_mib_p
*mib
;
1619 /* remote PHY type and MAC - set only if active */
1621 *type
= mib
->fddiPORTMy_Type
; /* our PHY type */
1622 *state
= mib
->fddiPORTConnectState
;
1623 *remote
= mib
->fddiPORTNeighborType
;
1625 switch(mib
->fddiPORTPCMState
) {
1627 *mac
= mib
->fddiPORTMacIndicated
.R_val
;
1633 * return rooted station status (called by SMT)
1635 int pcm_rooted_station(struct s_smc
*smc
)
1639 for (n
= 0 ; n
< NUMPHYS
; n
++) {
1640 if (smc
->y
[n
].mib
->fddiPORTPCMState
== PC8_ACTIVE
&&
1641 smc
->y
[n
].mib
->fddiPORTNeighborType
== TM
)
1648 * Interrupt actions for PLC & PCM events
1650 void plc_irq(struct s_smc
*smc
, int np
, unsigned int cmd
)
1651 /* int np; PHY index */
1653 struct s_phy
*phy
= &smc
->y
[np
] ;
1654 struct s_plc
*plc
= &phy
->plc
;
1658 #endif /* SUPERNET_3 */
1661 if (np
>= smc
->s
.numphys
) {
1665 if (cmd
& PL_EBUF_ERR
) { /* elastic buff. det. over-|underflow*/
1667 * Check whether the SRF Condition occurred.
1669 if (!plc
->ebuf_cont
&& phy
->mib
->fddiPORTPCMState
== PC8_ACTIVE
){
1671 * This is the real Elasticity Error.
1672 * More than one in a row are treated as a
1674 * Only count this in the active state.
1676 phy
->mib
->fddiPORTEBError_Ct
++ ;
1681 if (plc
->ebuf_cont
<= 1000) {
1683 * Prevent counter from being wrapped after
1684 * hanging years in that interrupt.
1686 plc
->ebuf_cont
++ ; /* Ebuf continous error */
1690 if (plc
->ebuf_cont
== 1000 &&
1691 ((inpw(PLC(np
,PL_STATUS_A
)) & PLC_REV_MASK
) ==
1694 * This interrupt remeained high for at least
1695 * 1000 consecutive interrupt calls.
1697 * This is caused by a hardware error of the
1698 * ORION part of the Supernet III chipset.
1700 * Disable this bit from the mask.
1702 corr_mask
= (plc_imsk_na
& ~PL_EBUF_ERR
) ;
1703 outpw(PLC(np
,PL_INTR_MASK
),corr_mask
);
1706 * Disconnect from the ring.
1707 * Call the driver with the reset indication.
1709 queue_event(smc
,EVENT_ECM
,EC_DISCONNECT
) ;
1712 * Make an error log entry.
1714 SMT_ERR_LOG(smc
,SMT_E0136
, SMT_E0136_MSG
) ;
1717 * Indicate the Reset.
1719 drv_reset_indication(smc
) ;
1721 #endif /* SUPERNET_3 */
1723 /* Reset the continous error variable */
1724 plc
->ebuf_cont
= 0 ; /* reset Ebuf continous error */
1726 if (cmd
& PL_PHYINV
) { /* physical layer invalid signal */
1729 if (cmd
& PL_VSYM_CTR
) { /* violation symbol counter has incr.*/
1732 if (cmd
& PL_MINI_CTR
) { /* dep. on PLC_CNTRL_A's MINI_CTR_INT*/
1735 if (cmd
& PL_LE_CTR
) { /* link error event counter */
1739 * note: PL_LINK_ERR_CTR MUST be read to clear it
1741 j
= inpw(PLC(np
,PL_LE_THRESHOLD
)) ;
1742 i
= inpw(PLC(np
,PL_LINK_ERR_CTR
)) ;
1745 /* wrapped around */
1749 if (phy
->lem
.lem_on
) {
1750 /* Note: Lem errors shall only be counted when
1751 * link is ACTIVE or LCT is active.
1753 phy
->lem
.lem_errors
+= i
;
1754 phy
->mib
->fddiPORTLem_Ct
+= i
;
1757 if (cmd
& PL_TPC_EXPIRED
) { /* TPC timer reached zero */
1758 if (plc
->p_state
== PS_LCT
) {
1766 if (cmd
& PL_LS_MATCH
) { /* LS == LS in PLC_CNTRL_B's MATCH_LS*/
1767 switch (inpw(PLC(np
,PL_CNTRL_B
)) & PL_MATCH_LS
) {
1768 case PL_I_IDLE
: phy
->curr_ls
= PC_ILS
; break ;
1769 case PL_I_HALT
: phy
->curr_ls
= PC_HLS
; break ;
1770 case PL_I_MASTR
: phy
->curr_ls
= PC_MLS
; break ;
1771 case PL_I_QUIET
: phy
->curr_ls
= PC_QLS
; break ;
1774 if (cmd
& PL_PCM_BREAK
) { /* PCM has entered the BREAK state */
1777 reason
= inpw(PLC(np
,PL_STATUS_B
)) & PL_BREAK_REASON
;
1780 case PL_B_PCS
: plc
->b_pcs
++ ; break ;
1781 case PL_B_TPC
: plc
->b_tpc
++ ; break ;
1782 case PL_B_TNE
: plc
->b_tne
++ ; break ;
1783 case PL_B_QLS
: plc
->b_qls
++ ; break ;
1784 case PL_B_ILS
: plc
->b_ils
++ ; break ;
1785 case PL_B_HLS
: plc
->b_hls
++ ; break ;
1788 /*jd 05-Aug-1999 changed: Bug #10419 */
1789 DB_PCMN(1,"PLC %d: MDcF = %x\n", np
, smc
->e
.DisconnectFlag
);
1790 if (smc
->e
.DisconnectFlag
== FALSE
) {
1791 DB_PCMN(1,"PLC %d: restart (reason %x)\n", np
, reason
);
1792 queue_event(smc
,EVENT_PCM
+np
,PC_START
) ;
1795 DB_PCMN(1,"PLC %d: NO!! restart (reason %x)\n", np
, reason
);
1800 * If both CODE & ENABLE are set ignore enable
1802 if (cmd
& PL_PCM_CODE
) { /* receive last sign.-bit | LCT complete */
1803 queue_event(smc
,EVENT_PCM
+np
,PC_SIGNAL
) ;
1804 n
= inpw(PLC(np
,PL_RCV_VECTOR
)) ;
1805 for (i
= 0 ; i
< plc
->p_bits
; i
++) {
1806 phy
->r_val
[plc
->p_start
+i
] = n
& 1 ;
1810 else if (cmd
& PL_PCM_ENABLED
) { /* asserted SC_JOIN, scrub.completed*/
1811 queue_event(smc
,EVENT_PCM
+np
,PC_JOIN
) ;
1813 if (cmd
& PL_TRACE_PROP
) { /* MLS while PC8_ACTIV || PC2_TRACE */
1815 if (!phy
->tr_flag
) {
1816 DB_PCMN(1,"PCM : irq TRACE_PROP %d %d\n",
1817 np
,smc
->mib
.fddiSMTECMState
) ;
1818 phy
->tr_flag
= TRUE
;
1819 smc
->e
.trace_prop
|= ENTITY_BIT(ENTITY_PHY(np
)) ;
1820 queue_event(smc
,EVENT_ECM
,EC_TRACE_PROP
) ;
1824 * filter PLC glitch ???
1825 * QLS || HLS only while in PC2_TRACE state
1827 if ((cmd
& PL_SELF_TEST
) && (phy
->mib
->fddiPORTPCMState
== PC2_TRACE
)) {
1829 if (smc
->e
.path_test
== PT_PASSED
) {
1830 DB_PCMN(1,"PCM : state = %s %d\n", get_pcmstate(smc
,np
),
1831 phy
->mib
->fddiPORTPCMState
) ;
1833 smc
->e
.path_test
= PT_PENDING
;
1834 queue_event(smc
,EVENT_ECM
,EC_PATH_TEST
) ;
1837 if (cmd
& PL_TNE_EXPIRED
) { /* TNE: length of noise events */
1838 /* break_required (TNE > NS_Max) */
1839 if (phy
->mib
->fddiPORTPCMState
== PC8_ACTIVE
) {
1840 if (!phy
->tr_flag
) {
1841 DB_PCMN(1,"PCM %c : PC81 %s\n",phy
->phy_name
,"NSE");
1842 queue_event(smc
,EVENT_PCM
+np
,PC_START
) ;
1848 if (cmd
& PL_NP_ERR
) { /* NP has requested to r/w an inv reg*/
1854 /* pin inactiv (GND) */
1855 if (cmd
& PL_PARITY_ERR
) { /* p. error dedected on TX9-0 inp */
1858 if (cmd
& PL_LSDO
) { /* carrier detected */
1864 void pcm_set_lct_short(struct s_smc
*smc
, int n
)
1866 if (n
<= 0 || n
> 1000)
1868 smc
->s
.lct_short
= n
;
1875 void pcm_get_state(struct s_smc
*smc
, struct smt_state
*state
)
1878 struct pcm_state
*pcs
;
1883 struct fddi_mib_p
*mib
;
1885 for (i
= 0, phy
= smc
->y
, pcs
= state
->pcm_state
; i
< NUMPHYS
;
1886 i
++ , phy
++, pcs
++ ) {
1888 pcs
->pcm_type
= (u_char
) mib
->fddiPORTMy_Type
;
1889 pcs
->pcm_state
= (u_char
) mib
->fddiPORTPCMState
;
1890 pcs
->pcm_mode
= phy
->pc_mode
;
1891 pcs
->pcm_neighbor
= (u_char
) mib
->fddiPORTNeighborType
;
1892 pcs
->pcm_bsf
= mib
->fddiPORTBS_Flag
;
1893 pcs
->pcm_lsf
= phy
->ls_flag
;
1894 pcs
->pcm_lct_fail
= (u_char
) mib
->fddiPORTLCTFail_Ct
;
1895 pcs
->pcm_ls_rx
= LS2MIB(sm_pm_get_ls(smc
,i
)) ;
1896 for (ii
= 0, rbits
= tbits
= 0 ; ii
< NUMBITS
; ii
++) {
1899 if (phy
->r_val
[NUMBITS
-1-ii
])
1901 if (phy
->t_val
[NUMBITS
-1-ii
])
1904 pcs
->pcm_r_val
= rbits
;
1905 pcs
->pcm_t_val
= tbits
;
1909 int get_pcm_state(struct s_smc
*smc
, int np
)
1915 switch (inpw(PLC(np
,PL_STATUS_B
)) & PL_PCM_STATE
) {
1916 case PL_PC0
: pcs
= PC_STOP
; break ;
1917 case PL_PC1
: pcs
= PC_START
; break ;
1918 case PL_PC2
: pcs
= PC_TRACE
; break ;
1919 case PL_PC3
: pcs
= PC_SIGNAL
; break ;
1920 case PL_PC4
: pcs
= PC_SIGNAL
; break ;
1921 case PL_PC5
: pcs
= PC_SIGNAL
; break ;
1922 case PL_PC6
: pcs
= PC_JOIN
; break ;
1923 case PL_PC7
: pcs
= PC_JOIN
; break ;
1924 case PL_PC8
: pcs
= PC_ENABLE
; break ;
1925 case PL_PC9
: pcs
= PC_MAINT
; break ;
1926 default : pcs
= PC_DISABLE
; break ;
1931 char *get_linestate(struct s_smc
*smc
, int np
)
1937 switch (inpw(PLC(np
,PL_STATUS_A
)) & PL_LINE_ST
) {
1938 case PL_L_NLS
: ls
= "NOISE" ; break ;
1939 case PL_L_ALS
: ls
= "ACTIV" ; break ;
1940 case PL_L_UND
: ls
= "UNDEF" ; break ;
1941 case PL_L_ILS4
: ls
= "ILS 4" ; break ;
1942 case PL_L_QLS
: ls
= "QLS" ; break ;
1943 case PL_L_MLS
: ls
= "MLS" ; break ;
1944 case PL_L_HLS
: ls
= "HLS" ; break ;
1945 case PL_L_ILS16
:ls
= "ILS16" ; break ;
1947 default: ls
= "unknown" ; break ;
1953 char *get_pcmstate(struct s_smc
*smc
, int np
)
1959 switch (inpw(PLC(np
,PL_STATUS_B
)) & PL_PCM_STATE
) {
1960 case PL_PC0
: pcs
= "OFF" ; break ;
1961 case PL_PC1
: pcs
= "BREAK" ; break ;
1962 case PL_PC2
: pcs
= "TRACE" ; break ;
1963 case PL_PC3
: pcs
= "CONNECT"; break ;
1964 case PL_PC4
: pcs
= "NEXT" ; break ;
1965 case PL_PC5
: pcs
= "SIGNAL" ; break ;
1966 case PL_PC6
: pcs
= "JOIN" ; break ;
1967 case PL_PC7
: pcs
= "VERIFY" ; break ;
1968 case PL_PC8
: pcs
= "ACTIV" ; break ;
1969 case PL_PC9
: pcs
= "MAINT" ; break ;
1970 default : pcs
= "UNKNOWN" ; break ;
1975 void list_phy(struct s_smc
*smc
)
1980 for (np
= 0 ; np
< NUMPHYS
; np
++) {
1981 plc
= &smc
->y
[np
].plc
;
1982 printf("PHY %d:\tERRORS\t\t\tBREAK_REASONS\t\tSTATES:\n",np
) ;
1983 printf("\tsoft_error: %ld \t\tPC_Start : %ld\n",
1984 plc
->soft_err
,plc
->b_pcs
);
1985 printf("\tparity_err: %ld \t\tTPC exp. : %ld\t\tLine: %s\n",
1986 plc
->parity_err
,plc
->b_tpc
,get_linestate(smc
,np
)) ;
1987 printf("\tebuf_error: %ld \t\tTNE exp. : %ld\n",
1988 plc
->ebuf_err
,plc
->b_tne
) ;
1989 printf("\tphyinvalid: %ld \t\tQLS det. : %ld\t\tPCM : %s\n",
1990 plc
->phyinv
,plc
->b_qls
,get_pcmstate(smc
,np
)) ;
1991 printf("\tviosym_ctr: %ld \t\tILS det. : %ld\n",
1992 plc
->vsym_ctr
,plc
->b_ils
) ;
1993 printf("\tmingap_ctr: %ld \t\tHLS det. : %ld\n",
1994 plc
->mini_ctr
,plc
->b_hls
) ;
1995 printf("\tnodepr_err: %ld\n",plc
->np_err
) ;
1996 printf("\tTPC_exp : %ld\n",plc
->tpc_exp
) ;
1997 printf("\tLEM_err : %ld\n",smc
->y
[np
].lem
.lem_errors
) ;
2003 void pcm_lem_dump(struct s_smc
*smc
)
2007 struct fddi_mib_p
*mib
;
2009 char *entostring() ;
2011 printf("PHY errors BER\n") ;
2012 printf("----------------------\n") ;
2013 for (i
= 0,phy
= smc
->y
; i
< NUMPHYS
; i
++,phy
++) {
2014 if (!plc_is_installed(smc
,i
))
2017 printf("%s\t%ld\t10E-%d\n",
2018 entostring(smc
,ENTITY_PHY(i
)),
2019 mib
->fddiPORTLem_Ct
,
2020 mib
->fddiPORTLer_Estimate
) ;