[TG3]: Set minimal hw interrupt mitigation.
[linux-2.6/verdex.git] / drivers / sbus / sbus.c
blob5d30a3ebfccd4b34a4c28e985041e7e2eba6e523
1 /* $Id: sbus.c,v 1.100 2002/01/24 15:36:24 davem Exp $
2 * sbus.c: SBus support routines.
4 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
5 */
7 #include <linux/kernel.h>
8 #include <linux/slab.h>
9 #include <linux/config.h>
10 #include <linux/init.h>
11 #include <linux/pci.h>
13 #include <asm/system.h>
14 #include <asm/sbus.h>
15 #include <asm/dma.h>
16 #include <asm/oplib.h>
17 #include <asm/bpp.h>
18 #include <asm/irq.h>
20 struct sbus_bus *sbus_root = NULL;
22 static struct linux_prom_irqs irqs[PROMINTR_MAX] __initdata = { { 0 } };
23 #ifdef CONFIG_SPARC32
24 static int interrupts[PROMINTR_MAX] __initdata = { 0 };
25 #endif
27 #ifdef CONFIG_PCI
28 extern int pcic_present(void);
29 #endif
31 /* Perhaps when I figure out more about the iommu we'll put a
32 * device registration routine here that probe_sbus() calls to
33 * setup the iommu for each Sbus.
36 /* We call this for each SBus device, and fill the structure based
37 * upon the prom device tree. We return the start of memory after
38 * the things we have allocated.
41 /* #define DEBUG_FILL */
43 static void __init fill_sbus_device(int prom_node, struct sbus_dev *sdev)
45 unsigned long address, base;
46 int len;
48 sdev->prom_node = prom_node;
49 prom_getstring(prom_node, "name",
50 sdev->prom_name, sizeof(sdev->prom_name));
51 address = prom_getint(prom_node, "address");
52 len = prom_getproperty(prom_node, "reg",
53 (char *) sdev->reg_addrs,
54 sizeof(sdev->reg_addrs));
55 if (len == -1) {
56 sdev->num_registers = 0;
57 goto no_regs;
60 if (len % sizeof(struct linux_prom_registers)) {
61 prom_printf("fill_sbus_device: proplen for regs of %s "
62 " was %d, need multiple of %d\n",
63 sdev->prom_name, len,
64 (int) sizeof(struct linux_prom_registers));
65 prom_halt();
67 if (len > (sizeof(struct linux_prom_registers) * PROMREG_MAX)) {
68 prom_printf("fill_sbus_device: Too many register properties "
69 "for device %s, len=%d\n",
70 sdev->prom_name, len);
71 prom_halt();
73 sdev->num_registers = len / sizeof(struct linux_prom_registers);
74 sdev->ranges_applied = 0;
76 base = (unsigned long) sdev->reg_addrs[0].phys_addr;
78 /* Compute the slot number. */
79 if (base >= SUN_SBUS_BVADDR && sparc_cpu_model == sun4m) {
80 sdev->slot = sbus_dev_slot(base);
81 } else {
82 sdev->slot = sdev->reg_addrs[0].which_io;
85 no_regs:
86 len = prom_getproperty(prom_node, "ranges",
87 (char *)sdev->device_ranges,
88 sizeof(sdev->device_ranges));
89 if (len == -1) {
90 sdev->num_device_ranges = 0;
91 goto no_ranges;
93 if (len % sizeof(struct linux_prom_ranges)) {
94 prom_printf("fill_sbus_device: proplen for ranges of %s "
95 " was %d, need multiple of %d\n",
96 sdev->prom_name, len,
97 (int) sizeof(struct linux_prom_ranges));
98 prom_halt();
100 if (len > (sizeof(struct linux_prom_ranges) * PROMREG_MAX)) {
101 prom_printf("fill_sbus_device: Too many range properties "
102 "for device %s, len=%d\n",
103 sdev->prom_name, len);
104 prom_halt();
106 sdev->num_device_ranges =
107 len / sizeof(struct linux_prom_ranges);
109 no_ranges:
110 /* XXX Unfortunately, IRQ issues are very arch specific.
111 * XXX Pull this crud out into an arch specific area
112 * XXX at some point. -DaveM
114 #ifdef CONFIG_SPARC64
115 len = prom_getproperty(prom_node, "interrupts",
116 (char *) irqs, sizeof(irqs));
117 if (len == -1 || len == 0) {
118 sdev->irqs[0] = 0;
119 sdev->num_irqs = 0;
120 } else {
121 unsigned int pri = irqs[0].pri;
123 sdev->num_irqs = 1;
124 if (pri < 0x20)
125 pri += sdev->slot * 8;
127 sdev->irqs[0] = sbus_build_irq(sdev->bus, pri);
129 #endif /* CONFIG_SPARC64 */
131 #ifdef CONFIG_SPARC32
132 len = prom_getproperty(prom_node, "intr",
133 (char *)irqs, sizeof(irqs));
134 if (len != -1) {
135 sdev->num_irqs = len / 8;
136 if (sdev->num_irqs == 0) {
137 sdev->irqs[0] = 0;
138 } else if (sparc_cpu_model == sun4d) {
139 extern unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq);
141 for (len = 0; len < sdev->num_irqs; len++)
142 sdev->irqs[len] = sun4d_build_irq(sdev, irqs[len].pri);
143 } else {
144 for (len = 0; len < sdev->num_irqs; len++)
145 sdev->irqs[len] = irqs[len].pri;
147 } else {
148 /* No "intr" node found-- check for "interrupts" node.
149 * This node contains SBus interrupt levels, not IPLs
150 * as in "intr", and no vector values. We convert
151 * SBus interrupt levels to PILs (platform specific).
153 len = prom_getproperty(prom_node, "interrupts",
154 (char *)interrupts, sizeof(interrupts));
155 if (len == -1) {
156 sdev->irqs[0] = 0;
157 sdev->num_irqs = 0;
158 } else {
159 sdev->num_irqs = len / sizeof(int);
160 for (len = 0; len < sdev->num_irqs; len++) {
161 sdev->irqs[len] = sbint_to_irq(sdev, interrupts[len]);
165 #endif /* CONFIG_SPARC32 */
168 /* This routine gets called from whoever needs the sbus first, to scan
169 * the SBus device tree. Currently it just prints out the devices
170 * found on the bus and builds trees of SBUS structs and attached
171 * devices.
174 extern void iommu_init(int iommu_node, struct sbus_bus *sbus);
175 extern void iounit_init(int sbi_node, int iounit_node, struct sbus_bus *sbus);
176 void sun4_init(void);
177 #ifdef CONFIG_SUN_AUXIO
178 extern void auxio_probe(void);
179 #endif
181 static void __init sbus_do_child_siblings(int start_node,
182 struct sbus_dev *child,
183 struct sbus_dev *parent,
184 struct sbus_bus *sbus)
186 struct sbus_dev *this_dev = child;
187 int this_node = start_node;
189 /* Child already filled in, just need to traverse siblings. */
190 child->child = NULL;
191 child->parent = parent;
192 while((this_node = prom_getsibling(this_node)) != 0) {
193 this_dev->next = kmalloc(sizeof(struct sbus_dev), GFP_ATOMIC);
194 this_dev = this_dev->next;
195 this_dev->next = NULL;
196 this_dev->parent = parent;
198 this_dev->bus = sbus;
199 fill_sbus_device(this_node, this_dev);
201 if(prom_getchild(this_node)) {
202 this_dev->child = kmalloc(sizeof(struct sbus_dev),
203 GFP_ATOMIC);
204 this_dev->child->bus = sbus;
205 this_dev->child->next = NULL;
206 fill_sbus_device(prom_getchild(this_node), this_dev->child);
207 sbus_do_child_siblings(prom_getchild(this_node),
208 this_dev->child, this_dev, sbus);
209 } else {
210 this_dev->child = NULL;
216 * XXX This functions appears to be a distorted version of
217 * prom_sbus_ranges_init(), with all sun4d stuff cut away.
218 * Ask DaveM what is going on here, how is sun4d supposed to work... XXX
220 /* added back sun4d patch from Thomas Bogendoerfer - should be OK (crn) */
222 static void __init sbus_bus_ranges_init(int parent_node, struct sbus_bus *sbus)
224 int len;
226 len = prom_getproperty(sbus->prom_node, "ranges",
227 (char *) sbus->sbus_ranges,
228 sizeof(sbus->sbus_ranges));
229 if (len == -1 || len == 0) {
230 sbus->num_sbus_ranges = 0;
231 return;
233 sbus->num_sbus_ranges = len / sizeof(struct linux_prom_ranges);
234 #ifdef CONFIG_SPARC32
235 if (sparc_cpu_model == sun4d) {
236 struct linux_prom_ranges iounit_ranges[PROMREG_MAX];
237 int num_iounit_ranges;
239 len = prom_getproperty(parent_node, "ranges",
240 (char *) iounit_ranges,
241 sizeof (iounit_ranges));
242 if (len != -1) {
243 num_iounit_ranges = (len/sizeof(struct linux_prom_ranges));
244 prom_adjust_ranges (sbus->sbus_ranges, sbus->num_sbus_ranges, iounit_ranges, num_iounit_ranges);
247 #endif
250 static void __init __apply_ranges_to_regs(struct linux_prom_ranges *ranges,
251 int num_ranges,
252 struct linux_prom_registers *regs,
253 int num_regs)
255 if (num_ranges) {
256 int regnum;
258 for (regnum = 0; regnum < num_regs; regnum++) {
259 int rngnum;
261 for (rngnum = 0; rngnum < num_ranges; rngnum++) {
262 if (regs[regnum].which_io == ranges[rngnum].ot_child_space)
263 break;
265 if (rngnum == num_ranges) {
266 /* We used to flag this as an error. Actually
267 * some devices do not report the regs as we expect.
268 * For example, see SUNW,pln device. In that case
269 * the reg property is in a format internal to that
270 * node, ie. it is not in the SBUS register space
271 * per se. -DaveM
273 return;
275 regs[regnum].which_io = ranges[rngnum].ot_parent_space;
276 regs[regnum].phys_addr -= ranges[rngnum].ot_child_base;
277 regs[regnum].phys_addr += ranges[rngnum].ot_parent_base;
282 static void __init __fixup_regs_sdev(struct sbus_dev *sdev)
284 if (sdev->num_registers != 0) {
285 struct sbus_dev *parent = sdev->parent;
286 int i;
288 while (parent != NULL) {
289 __apply_ranges_to_regs(parent->device_ranges,
290 parent->num_device_ranges,
291 sdev->reg_addrs,
292 sdev->num_registers);
294 parent = parent->parent;
297 __apply_ranges_to_regs(sdev->bus->sbus_ranges,
298 sdev->bus->num_sbus_ranges,
299 sdev->reg_addrs,
300 sdev->num_registers);
302 for (i = 0; i < sdev->num_registers; i++) {
303 struct resource *res = &sdev->resource[i];
305 res->start = sdev->reg_addrs[i].phys_addr;
306 res->end = (res->start +
307 (unsigned long)sdev->reg_addrs[i].reg_size - 1UL);
308 res->flags = IORESOURCE_IO |
309 (sdev->reg_addrs[i].which_io & 0xff);
314 static void __init sbus_fixup_all_regs(struct sbus_dev *first_sdev)
316 struct sbus_dev *sdev;
318 for (sdev = first_sdev; sdev; sdev = sdev->next) {
319 if (sdev->child)
320 sbus_fixup_all_regs(sdev->child);
321 __fixup_regs_sdev(sdev);
325 extern void register_proc_sparc_ioport(void);
326 extern void firetruck_init(void);
328 #ifdef CONFIG_SUN4
329 extern void sun4_dvma_init(void);
330 #endif
332 static int __init sbus_init(void)
334 int nd, this_sbus, sbus_devs, topnd, iommund;
335 unsigned int sbus_clock;
336 struct sbus_bus *sbus;
337 struct sbus_dev *this_dev;
338 int num_sbus = 0; /* How many did we find? */
340 #ifdef CONFIG_SPARC32
341 register_proc_sparc_ioport();
342 #endif
344 #ifdef CONFIG_SUN4
345 sun4_dvma_init();
346 return 0;
347 #endif
349 topnd = prom_getchild(prom_root_node);
351 /* Finding the first sbus is a special case... */
352 iommund = 0;
353 if(sparc_cpu_model == sun4u) {
354 nd = prom_searchsiblings(topnd, "sbus");
355 if(nd == 0) {
356 #ifdef CONFIG_PCI
357 if (!pcic_present()) {
358 prom_printf("Neither SBUS nor PCI found.\n");
359 prom_halt();
360 } else {
361 #ifdef CONFIG_SPARC64
362 firetruck_init();
363 #endif
365 return 0;
366 #else
367 prom_printf("YEEE, UltraSparc sbus not found\n");
368 prom_halt();
369 #endif
371 } else if(sparc_cpu_model == sun4d) {
372 if((iommund = prom_searchsiblings(topnd, "io-unit")) == 0 ||
373 (nd = prom_getchild(iommund)) == 0 ||
374 (nd = prom_searchsiblings(nd, "sbi")) == 0) {
375 panic("sbi not found");
377 } else if((nd = prom_searchsiblings(topnd, "sbus")) == 0) {
378 if((iommund = prom_searchsiblings(topnd, "iommu")) == 0 ||
379 (nd = prom_getchild(iommund)) == 0 ||
380 (nd = prom_searchsiblings(nd, "sbus")) == 0) {
381 #ifdef CONFIG_PCI
382 if (!pcic_present()) {
383 prom_printf("Neither SBUS nor PCI found.\n");
384 prom_halt();
386 return 0;
387 #else
388 /* No reason to run further - the data access trap will occur. */
389 panic("sbus not found");
390 #endif
394 /* Ok, we've found the first one, allocate first SBus struct
395 * and place in chain.
397 sbus = sbus_root = kmalloc(sizeof(struct sbus_bus), GFP_ATOMIC);
398 sbus->next = NULL;
399 sbus->prom_node = nd;
400 this_sbus = nd;
402 if(iommund && sparc_cpu_model != sun4u && sparc_cpu_model != sun4d)
403 iommu_init(iommund, sbus);
405 /* Loop until we find no more SBUS's */
406 while(this_sbus) {
407 #ifdef CONFIG_SPARC64
408 /* IOMMU hides inside SBUS/SYSIO prom node on Ultra. */
409 if(sparc_cpu_model == sun4u) {
410 extern void sbus_iommu_init(int prom_node, struct sbus_bus *sbus);
412 sbus_iommu_init(this_sbus, sbus);
414 #endif /* CONFIG_SPARC64 */
416 #ifdef CONFIG_SPARC32
417 if (sparc_cpu_model == sun4d)
418 iounit_init(this_sbus, iommund, sbus);
419 #endif /* CONFIG_SPARC32 */
420 printk("sbus%d: ", num_sbus);
421 sbus_clock = prom_getint(this_sbus, "clock-frequency");
422 if(sbus_clock == -1)
423 sbus_clock = (25*1000*1000);
424 printk("Clock %d.%d MHz\n", (int) ((sbus_clock/1000)/1000),
425 (int) (((sbus_clock/1000)%1000 != 0) ?
426 (((sbus_clock/1000)%1000) + 1000) : 0));
428 prom_getstring(this_sbus, "name",
429 sbus->prom_name, sizeof(sbus->prom_name));
430 sbus->clock_freq = sbus_clock;
431 #ifdef CONFIG_SPARC32
432 if (sparc_cpu_model == sun4d) {
433 sbus->devid = prom_getint(iommund, "device-id");
434 sbus->board = prom_getint(iommund, "board#");
436 #endif
438 sbus_bus_ranges_init(iommund, sbus);
440 sbus_devs = prom_getchild(this_sbus);
441 if (!sbus_devs) {
442 sbus->devices = NULL;
443 goto next_bus;
446 sbus->devices = kmalloc(sizeof(struct sbus_dev), GFP_ATOMIC);
448 this_dev = sbus->devices;
449 this_dev->next = NULL;
451 this_dev->bus = sbus;
452 this_dev->parent = NULL;
453 fill_sbus_device(sbus_devs, this_dev);
455 /* Should we traverse for children? */
456 if(prom_getchild(sbus_devs)) {
457 /* Allocate device node */
458 this_dev->child = kmalloc(sizeof(struct sbus_dev),
459 GFP_ATOMIC);
460 /* Fill it */
461 this_dev->child->bus = sbus;
462 this_dev->child->next = NULL;
463 fill_sbus_device(prom_getchild(sbus_devs),
464 this_dev->child);
465 sbus_do_child_siblings(prom_getchild(sbus_devs),
466 this_dev->child,
467 this_dev,
468 sbus);
469 } else {
470 this_dev->child = NULL;
473 while((sbus_devs = prom_getsibling(sbus_devs)) != 0) {
474 /* Allocate device node */
475 this_dev->next = kmalloc(sizeof(struct sbus_dev),
476 GFP_ATOMIC);
477 this_dev = this_dev->next;
478 this_dev->next = NULL;
480 /* Fill it */
481 this_dev->bus = sbus;
482 this_dev->parent = NULL;
483 fill_sbus_device(sbus_devs, this_dev);
485 /* Is there a child node hanging off of us? */
486 if(prom_getchild(sbus_devs)) {
487 /* Get new device struct */
488 this_dev->child = kmalloc(sizeof(struct sbus_dev),
489 GFP_ATOMIC);
490 /* Fill it */
491 this_dev->child->bus = sbus;
492 this_dev->child->next = NULL;
493 fill_sbus_device(prom_getchild(sbus_devs),
494 this_dev->child);
495 sbus_do_child_siblings(prom_getchild(sbus_devs),
496 this_dev->child,
497 this_dev,
498 sbus);
499 } else {
500 this_dev->child = NULL;
504 /* Walk all devices and apply parent ranges. */
505 sbus_fixup_all_regs(sbus->devices);
507 dvma_init(sbus);
508 next_bus:
509 num_sbus++;
510 if(sparc_cpu_model == sun4u) {
511 this_sbus = prom_getsibling(this_sbus);
512 if(!this_sbus)
513 break;
514 this_sbus = prom_searchsiblings(this_sbus, "sbus");
515 } else if(sparc_cpu_model == sun4d) {
516 iommund = prom_getsibling(iommund);
517 if(!iommund)
518 break;
519 iommund = prom_searchsiblings(iommund, "io-unit");
520 if(!iommund)
521 break;
522 this_sbus = prom_searchsiblings(prom_getchild(iommund), "sbi");
523 } else {
524 this_sbus = prom_getsibling(this_sbus);
525 if(!this_sbus)
526 break;
527 this_sbus = prom_searchsiblings(this_sbus, "sbus");
529 if(this_sbus) {
530 sbus->next = kmalloc(sizeof(struct sbus_bus), GFP_ATOMIC);
531 sbus = sbus->next;
532 sbus->next = NULL;
533 sbus->prom_node = this_sbus;
534 } else {
535 break;
537 } /* while(this_sbus) */
539 if (sparc_cpu_model == sun4d) {
540 extern void sun4d_init_sbi_irq(void);
541 sun4d_init_sbi_irq();
544 #ifdef CONFIG_SPARC64
545 if (sparc_cpu_model == sun4u) {
546 firetruck_init();
548 #endif
549 #ifdef CONFIG_SUN_AUXIO
550 if (sparc_cpu_model == sun4u)
551 auxio_probe ();
552 #endif
553 #ifdef CONFIG_SPARC64
554 if (sparc_cpu_model == sun4u) {
555 extern void clock_probe(void);
557 clock_probe();
559 #endif
561 return 0;
564 subsys_initcall(sbus_init);