drivers/scsi/st.h

   1
   2 #ifndef _ST_H
   3 #define _ST_H
   4
   5 #include <linux/completion.h>
   6
   7
   8 /* Descriptor for analyzed sense data */
   9 struct st_cmdstatus {
  10         int midlevel_result;
  11         struct scsi_sense_hdr sense_hdr;
  12         int have_sense;
  13         u64 uremainder64;
  14         u8 flags;
  15         u8 remainder_valid;
  16         u8 fixed_format;
  17         u8 deferred;
  18 };
  19
  20 /* The tape buffer descriptor. */
  21 struct st_buffer {
  22         unsigned char in_use;
  23         unsigned char dma;      /* DMA-able buffer */
  24         unsigned char do_dio;   /* direct i/o set up? */
  25         int buffer_size;
  26         int buffer_blocks;
  27         int buffer_bytes;
  28         int read_pointer;
  29         int writing;
  30         int syscall_result;
  31         struct scsi_request *last_SRpnt;
  32         struct st_cmdstatus cmdstat;
  33         unsigned char *b_data;
  34         unsigned short use_sg;  /* zero or max number of s/g segments for this adapter */
  35         unsigned short sg_segs;         /* number of segments in s/g list */
  36         unsigned short orig_frp_segs;   /* number of segments allocated at first try */
  37         unsigned short frp_segs;        /* number of buffer segments */
  38         unsigned int frp_sg_current;    /* driver buffer length currently in s/g list */
  39         struct st_buf_fragment *frp;    /* the allocated buffer fragment list */
  40         struct scatterlist sg[1];       /* MUST BE last item */
  41 };
  42
  43 /* The tape buffer fragment descriptor */
  44 struct st_buf_fragment {
  45         struct page *page;
  46         unsigned int length;
  47 };
  48
  49 /* The tape mode definition */
  50 struct st_modedef {
  51         unsigned char defined;
  52         unsigned char sysv;     /* SYS V semantics? */
  53         unsigned char do_async_writes;
  54         unsigned char do_buffer_writes;
  55         unsigned char do_read_ahead;
  56         unsigned char defaults_for_writes;
  57         unsigned char default_compression;      /* 0 = don't touch, etc */
  58         short default_density;  /* Forced density, -1 = no value */
  59         int default_blksize;    /* Forced blocksize, -1 = no value */
  60         struct cdev *cdevs[2];  /* Auto-rewind and non-rewind devices */
  61 };
  62
  63 /* Number of modes can be changed by changing ST_NBR_MODE_BITS. The maximum
  64    number of modes is 16 (ST_NBR_MODE_BITS 4) */
  65 #define ST_NBR_MODE_BITS 2
  66 #define ST_NBR_MODES (1 << ST_NBR_MODE_BITS)
  67 #define ST_MODE_SHIFT (7 - ST_NBR_MODE_BITS)
  68 #define ST_MODE_MASK ((ST_NBR_MODES - 1) << ST_MODE_SHIFT)
  69
  70 #define ST_MAX_TAPES 128
  71 #define ST_MAX_TAPE_ENTRIES  (ST_MAX_TAPES << (ST_NBR_MODE_BITS + 1))
  72
  73 /* The status related to each partition */
  74 struct st_partstat {
  75         unsigned char rw;
  76         unsigned char eof;
  77         unsigned char at_sm;
  78         unsigned char last_block_valid;
  79         u32 last_block_visited;
  80         int drv_block;          /* The block where the drive head is */
  81         int drv_file;
  82 };
  83
  84 #define ST_NBR_PARTITIONS 4
  85
  86 /* The tape drive descriptor */
  87 struct scsi_tape {
  88         struct scsi_driver *driver;
  89         struct scsi_device *device;
  90         struct semaphore lock;  /* For serialization */
  91         struct completion wait; /* For SCSI commands */
  92         struct st_buffer *buffer;
  93
  94         /* Drive characteristics */
  95         unsigned char omit_blklims;
  96         unsigned char do_auto_lock;
  97         unsigned char can_bsr;
  98         unsigned char can_partitions;
  99         unsigned char two_fm;
 100         unsigned char fast_mteom;
 101         unsigned char immediate;
 102         unsigned char restr_dma;
 103         unsigned char scsi2_logical;
 104         unsigned char default_drvbuffer;        /* 0xff = don't touch, value 3 bits */
 105         unsigned char cln_mode;                 /* 0 = none, otherwise sense byte nbr */
 106         unsigned char cln_sense_value;
 107         unsigned char cln_sense_mask;
 108         unsigned char use_pf;                   /* Set Page Format bit in all mode selects? */
 109         unsigned char try_dio;                  /* try direct i/o? */
 110         unsigned char c_algo;                   /* compression algorithm */
 111         unsigned char pos_unknown;                      /* after reset position unknown */
 112         int tape_type;
 113         int long_timeout;       /* timeout for commands known to take long time */
 114
 115         unsigned long max_pfn;  /* the maximum page number reachable by the HBA */
 116
 117         /* Mode characteristics */
 118         struct st_modedef modes[ST_NBR_MODES];
 119         int current_mode;
 120
 121         /* Status variables */
 122         int partition;
 123         int new_partition;
 124         int nbr_partitions;     /* zero until partition support enabled */
 125         struct st_partstat ps[ST_NBR_PARTITIONS];
 126         unsigned char dirty;
 127         unsigned char ready;
 128         unsigned char write_prot;
 129         unsigned char drv_write_prot;
 130         unsigned char in_use;
 131         unsigned char blksize_changed;
 132         unsigned char density_changed;
 133         unsigned char compression_changed;
 134         unsigned char drv_buffer;
 135         unsigned char density;
 136         unsigned char door_locked;
 137         unsigned char autorew_dev;   /* auto-rewind device */
 138         unsigned char rew_at_close;  /* rewind necessary at close */
 139         unsigned char inited;
 140         unsigned char cleaning_req;  /* cleaning requested? */
 141         int block_size;
 142         int min_block;
 143         int max_block;
 144         int recover_count;     /* From tape opening */
 145         int recover_reg;       /* From last status call */
 146
 147 #if DEBUG
 148         unsigned char write_pending;
 149         int nbr_finished;
 150         int nbr_waits;
 151         int nbr_requests;
 152         int nbr_dio;
 153         int nbr_pages;
 154         int nbr_combinable;
 155         unsigned char last_cmnd[6];
 156         unsigned char last_sense[16];
 157 #endif
 158         struct gendisk *disk;
 159 };
 160
 161 /* Bit masks for use_pf */
 162 #define USE_PF      1
 163 #define PF_TESTED   2
 164
 165 /* Values of eof */
 166 #define ST_NOEOF        0
 167 #define ST_FM_HIT       1
 168 #define ST_FM           2
 169 #define ST_EOM_OK       3
 170 #define ST_EOM_ERROR    4
 171 #define ST_EOD_1        5
 172 #define ST_EOD_2        6
 173 #define ST_EOD          7
 174 /* EOD hit while reading => ST_EOD_1 => return zero => ST_EOD_2 =>
 175    return zero => ST_EOD, return ENOSPC */
 176 /* When writing: ST_EOM_OK == early warning found, write OK
 177                  ST_EOD_1  == allow trying new write after early warning
 178                  ST_EOM_ERROR == early warning found, not able to write all */
 179
 180 /* Values of rw */
 181 #define ST_IDLE         0
 182 #define ST_READING      1
 183 #define ST_WRITING      2
 184
 185 /* Values of ready state */
 186 #define ST_READY        0
 187 #define ST_NOT_READY    1
 188 #define ST_NO_TAPE      2
 189
 190 /* Values for door lock state */
 191 #define ST_UNLOCKED     0
 192 #define ST_LOCKED_EXPLICIT 1
 193 #define ST_LOCKED_AUTO  2
 194 #define ST_LOCK_FAILS   3
 195
 196 /* Positioning SCSI-commands for Tandberg, etc. drives */
 197 #define QFA_REQUEST_BLOCK       0x02
 198 #define QFA_SEEK_BLOCK          0x0c
 199
 200 /* Setting the binary options */
 201 #define ST_DONT_TOUCH  0
 202 #define ST_NO          1
 203 #define ST_YES         2
 204
 205 #define EXTENDED_SENSE_START  18
 206
 207 /* Masks for some conditions in the sense data */
 208 #define SENSE_FMK   0x80
 209 #define SENSE_EOM   0x40
 210 #define SENSE_ILI   0x20
 211
 212 #endif