?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[TG3]: Set minimal hw interrupt mitigation.
[linux-2.6/verdex.git] / drivers / serial / amba-pl010.c
blob2884b310e54d2d01f50d012d4394343b08b5717a
1 /*
2 * linux/drivers/char/amba.c
3 *
4 * Driver for AMBA serial ports
5 *
6 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
7 *
8 * Copyright 1999 ARM Limited
9 * Copyright (C) 2000 Deep Blue Solutions Ltd.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 *
25 * $Id: amba.c,v 1.41 2002/07/28 10:03:27 rmk Exp $
26 *
27 * This is a generic driver for ARM AMBA-type serial ports. They
28 * have a lot of 16550-like features, but are not register compatible.
29 * Note that although they do have CTS, DCD and DSR inputs, they do
30 * not have an RI input, nor do they have DTR or RTS outputs. If
31 * required, these have to be supplied via some other means (eg, GPIO)
32 * and hooked into this driver.
33 */
34 #include <linux/config.h>
35
36 #if defined(CONFIG_SERIAL_AMBA_PL010_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
37 #define SUPPORT_SYSRQ
38 #endif
39
40 #include <linux/module.h>
41 #include <linux/ioport.h>
42 #include <linux/init.h>
43 #include <linux/console.h>
44 #include <linux/sysrq.h>
45 #include <linux/device.h>
46 #include <linux/tty.h>
47 #include <linux/tty_flip.h>
48 #include <linux/serial_core.h>
49 #include <linux/serial.h>
50
51 #include <asm/io.h>
52 #include <asm/irq.h>
53 #include <asm/hardware/amba.h>
54 #include <asm/hardware/amba_serial.h>
55
56 #define UART_NR 2
57
58 #define SERIAL_AMBA_MAJOR 204
59 #define SERIAL_AMBA_MINOR 16
60 #define SERIAL_AMBA_NR UART_NR
61
62 #define AMBA_ISR_PASS_LIMIT 256
63
64 /*
65 * Access macros for the AMBA UARTs
66 */
67 #define UART_GET_INT_STATUS(p) readb((p)->membase + UART010_IIR)
68 #define UART_PUT_ICR(p, c) writel((c), (p)->membase + UART010_ICR)
69 #define UART_GET_FR(p) readb((p)->membase + UART01x_FR)
70 #define UART_GET_CHAR(p) readb((p)->membase + UART01x_DR)
71 #define UART_PUT_CHAR(p, c) writel((c), (p)->membase + UART01x_DR)
72 #define UART_GET_RSR(p) readb((p)->membase + UART01x_RSR)
73 #define UART_GET_CR(p) readb((p)->membase + UART010_CR)
74 #define UART_PUT_CR(p,c) writel((c), (p)->membase + UART010_CR)
75 #define UART_GET_LCRL(p) readb((p)->membase + UART010_LCRL)
76 #define UART_PUT_LCRL(p,c) writel((c), (p)->membase + UART010_LCRL)
77 #define UART_GET_LCRM(p) readb((p)->membase + UART010_LCRM)
78 #define UART_PUT_LCRM(p,c) writel((c), (p)->membase + UART010_LCRM)
79 #define UART_GET_LCRH(p) readb((p)->membase + UART010_LCRH)
80 #define UART_PUT_LCRH(p,c) writel((c), (p)->membase + UART010_LCRH)
81 #define UART_RX_DATA(s) (((s) & UART01x_FR_RXFE) == 0)
82 #define UART_TX_READY(s) (((s) & UART01x_FR_TXFF) == 0)
83 #define UART_TX_EMPTY(p) ((UART_GET_FR(p) & UART01x_FR_TMSK) == 0)
84
85 #define UART_DUMMY_RSR_RX /*256*/0
86 #define UART_PORT_SIZE 64
87
88 /*
89 * On the Integrator platform, the port RTS and DTR are provided by
90 * bits in the following SC_CTRLS register bits:
91 * RTS DTR
92 * UART0 7 6
93 * UART1 5 4
94 */
95 #define SC_CTRLC (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET)
96 #define SC_CTRLS (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET)
97
98 /*
99 * We wrap our port structure around the generic uart_port.
100 */
101 struct uart_amba_port {
102 struct uart_port port;
103 unsigned int dtr_mask;
104 unsigned int rts_mask;
105 unsigned int old_status;
106 };
107
108 static void pl010_stop_tx(struct uart_port *port, unsigned int tty_stop)
109 {
110 unsigned int cr;
111
112 cr = UART_GET_CR(port);
113 cr &= ~UART010_CR_TIE;
114 UART_PUT_CR(port, cr);
115 }
116
117 static void pl010_start_tx(struct uart_port *port, unsigned int tty_start)
118 {
119 unsigned int cr;
120
121 cr = UART_GET_CR(port);
122 cr |= UART010_CR_TIE;
123 UART_PUT_CR(port, cr);
124 }
125
126 static void pl010_stop_rx(struct uart_port *port)
127 {
128 unsigned int cr;
129
130 cr = UART_GET_CR(port);
131 cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
132 UART_PUT_CR(port, cr);
133 }
134
135 static void pl010_enable_ms(struct uart_port *port)
136 {
137 unsigned int cr;
138
139 cr = UART_GET_CR(port);
140 cr |= UART010_CR_MSIE;
141 UART_PUT_CR(port, cr);
142 }
143
144 static void
145 #ifdef SUPPORT_SYSRQ
146 pl010_rx_chars(struct uart_port *port, struct pt_regs *regs)
147 #else
148 pl010_rx_chars(struct uart_port *port)
149 #endif
150 {
151 struct tty_struct *tty = port->info->tty;
152 unsigned int status, ch, flag, rsr, max_count = 256;
153
154 status = UART_GET_FR(port);
155 while (UART_RX_DATA(status) && max_count--) {
156 if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
157 if (tty->low_latency)
158 tty_flip_buffer_push(tty);
159 /*
160 * If this failed then we will throw away the
161 * bytes but must do so to clear interrupts.
162 */
163 }
164
165 ch = UART_GET_CHAR(port);
166 flag = TTY_NORMAL;
167
168 port->icount.rx++;
169
170 /*
171 * Note that the error handling code is
172 * out of the main execution path
173 */
174 rsr = UART_GET_RSR(port) | UART_DUMMY_RSR_RX;
175 if (unlikely(rsr & UART01x_RSR_ANY)) {
176 if (rsr & UART01x_RSR_BE) {
177 rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
178 port->icount.brk++;
179 if (uart_handle_break(port))
180 goto ignore_char;
181 } else if (rsr & UART01x_RSR_PE)
182 port->icount.parity++;
183 else if (rsr & UART01x_RSR_FE)
184 port->icount.frame++;
185 if (rsr & UART01x_RSR_OE)
186 port->icount.overrun++;
187
188 rsr &= port->read_status_mask;
189
190 if (rsr & UART01x_RSR_BE)
191 flag = TTY_BREAK;
192 else if (rsr & UART01x_RSR_PE)
193 flag = TTY_PARITY;
194 else if (rsr & UART01x_RSR_FE)
195 flag = TTY_FRAME;
196 }
197
198 if (uart_handle_sysrq_char(port, ch, regs))
199 goto ignore_char;
200
201 uart_insert_char(port, rsr, UART01x_RSR_OE, ch, flag);
202
203 ignore_char:
204 status = UART_GET_FR(port);
205 }
206 tty_flip_buffer_push(tty);
207 return;
208 }
209
210 static void pl010_tx_chars(struct uart_port *port)
211 {
212 struct circ_buf *xmit = &port->info->xmit;
213 int count;
214
215 if (port->x_char) {
216 UART_PUT_CHAR(port, port->x_char);
217 port->icount.tx++;
218 port->x_char = 0;
219 return;
220 }
221 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
222 pl010_stop_tx(port, 0);
223 return;
224 }
225
226 count = port->fifosize >> 1;
227 do {
228 UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
229 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
230 port->icount.tx++;
231 if (uart_circ_empty(xmit))
232 break;
233 } while (--count > 0);
234
235 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
236 uart_write_wakeup(port);
237
238 if (uart_circ_empty(xmit))
239 pl010_stop_tx(port, 0);
240 }
241
242 static void pl010_modem_status(struct uart_port *port)
243 {
244 struct uart_amba_port *uap = (struct uart_amba_port *)port;
245 unsigned int status, delta;
246
247 UART_PUT_ICR(&uap->port, 0);
248
249 status = UART_GET_FR(&uap->port) & UART01x_FR_MODEM_ANY;
250
251 delta = status ^ uap->old_status;
252 uap->old_status = status;
253
254 if (!delta)
255 return;
256
257 if (delta & UART01x_FR_DCD)
258 uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
259
260 if (delta & UART01x_FR_DSR)
261 uap->port.icount.dsr++;
262
263 if (delta & UART01x_FR_CTS)
264 uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
265
266 wake_up_interruptible(&uap->port.info->delta_msr_wait);
267 }
268
269 static irqreturn_t pl010_int(int irq, void *dev_id, struct pt_regs *regs)
270 {
271 struct uart_port *port = dev_id;
272 unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
273 int handled = 0;
274
275 spin_lock(&port->lock);
276
277 status = UART_GET_INT_STATUS(port);
278 if (status) {
279 do {
280 if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
281 #ifdef SUPPORT_SYSRQ
282 pl010_rx_chars(port, regs);
283 #else
284 pl010_rx_chars(port);
285 #endif
286 if (status & UART010_IIR_MIS)
287 pl010_modem_status(port);
288 if (status & UART010_IIR_TIS)
289 pl010_tx_chars(port);
290
291 if (pass_counter-- == 0)
292 break;
293
294 status = UART_GET_INT_STATUS(port);
295 } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
296 UART010_IIR_TIS));
297 handled = 1;
298 }
299
300 spin_unlock(&port->lock);
301
302 return IRQ_RETVAL(handled);
303 }
304
305 static unsigned int pl010_tx_empty(struct uart_port *port)
306 {
307 return UART_GET_FR(port) & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
308 }
309
310 static unsigned int pl010_get_mctrl(struct uart_port *port)
311 {
312 unsigned int result = 0;
313 unsigned int status;
314
315 status = UART_GET_FR(port);
316 if (status & UART01x_FR_DCD)
317 result |= TIOCM_CAR;
318 if (status & UART01x_FR_DSR)
319 result |= TIOCM_DSR;
320 if (status & UART01x_FR_CTS)
321 result |= TIOCM_CTS;
322
323 return result;
324 }
325
326 static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl)
327 {
328 struct uart_amba_port *uap = (struct uart_amba_port *)port;
329 unsigned int ctrls = 0, ctrlc = 0;
330
331 if (mctrl & TIOCM_RTS)
332 ctrlc |= uap->rts_mask;
333 else
334 ctrls |= uap->rts_mask;
335
336 if (mctrl & TIOCM_DTR)
337 ctrlc |= uap->dtr_mask;
338 else
339 ctrls |= uap->dtr_mask;
340
341 __raw_writel(ctrls, SC_CTRLS);
342 __raw_writel(ctrlc, SC_CTRLC);
343 }
344
345 static void pl010_break_ctl(struct uart_port *port, int break_state)
346 {
347 unsigned long flags;
348 unsigned int lcr_h;
349
350 spin_lock_irqsave(&port->lock, flags);
351 lcr_h = UART_GET_LCRH(port);
352 if (break_state == -1)
353 lcr_h |= UART01x_LCRH_BRK;
354 else
355 lcr_h &= ~UART01x_LCRH_BRK;
356 UART_PUT_LCRH(port, lcr_h);
357 spin_unlock_irqrestore(&port->lock, flags);
358 }
359
360 static int pl010_startup(struct uart_port *port)
361 {
362 struct uart_amba_port *uap = (struct uart_amba_port *)port;
363 int retval;
364
365 /*
366 * Allocate the IRQ
367 */
368 retval = request_irq(port->irq, pl010_int, 0, "uart-pl010", port);
369 if (retval)
370 return retval;
371
372 /*
373 * initialise the old status of the modem signals
374 */
375 uap->old_status = UART_GET_FR(port) & UART01x_FR_MODEM_ANY;
376
377 /*
378 * Finally, enable interrupts
379 */
380 UART_PUT_CR(port, UART01x_CR_UARTEN | UART010_CR_RIE |
381 UART010_CR_RTIE);
382
383 return 0;
384 }
385
386 static void pl010_shutdown(struct uart_port *port)
387 {
388 /*
389 * Free the interrupt
390 */
391 free_irq(port->irq, port);
392
393 /*
394 * disable all interrupts, disable the port
395 */
396 UART_PUT_CR(port, 0);
397
398 /* disable break condition and fifos */
399 UART_PUT_LCRH(port, UART_GET_LCRH(port) &
400 ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN));
401 }
402
403 static void
404 pl010_set_termios(struct uart_port *port, struct termios *termios,
405 struct termios *old)
406 {
407 unsigned int lcr_h, old_cr;
408 unsigned long flags;
409 unsigned int baud, quot;
410
411 /*
412 * Ask the core to calculate the divisor for us.
413 */
414 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
415 quot = uart_get_divisor(port, baud);
416
417 switch (termios->c_cflag & CSIZE) {
418 case CS5:
419 lcr_h = UART01x_LCRH_WLEN_5;
420 break;
421 case CS6:
422 lcr_h = UART01x_LCRH_WLEN_6;
423 break;
424 case CS7:
425 lcr_h = UART01x_LCRH_WLEN_7;
426 break;
427 default: // CS8
428 lcr_h = UART01x_LCRH_WLEN_8;
429 break;
430 }
431 if (termios->c_cflag & CSTOPB)
432 lcr_h |= UART01x_LCRH_STP2;
433 if (termios->c_cflag & PARENB) {
434 lcr_h |= UART01x_LCRH_PEN;
435 if (!(termios->c_cflag & PARODD))
436 lcr_h |= UART01x_LCRH_EPS;
437 }
438 if (port->fifosize > 1)
439 lcr_h |= UART01x_LCRH_FEN;
440
441 spin_lock_irqsave(&port->lock, flags);
442
443 /*
444 * Update the per-port timeout.
445 */
446 uart_update_timeout(port, termios->c_cflag, baud);
447
448 port->read_status_mask = UART01x_RSR_OE;
449 if (termios->c_iflag & INPCK)
450 port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
451 if (termios->c_iflag & (BRKINT | PARMRK))
452 port->read_status_mask |= UART01x_RSR_BE;
453
454 /*
455 * Characters to ignore
456 */
457 port->ignore_status_mask = 0;
458 if (termios->c_iflag & IGNPAR)
459 port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
460 if (termios->c_iflag & IGNBRK) {
461 port->ignore_status_mask |= UART01x_RSR_BE;
462 /*
463 * If we're ignoring parity and break indicators,
464 * ignore overruns too (for real raw support).
465 */
466 if (termios->c_iflag & IGNPAR)
467 port->ignore_status_mask |= UART01x_RSR_OE;
468 }
469
470 /*
471 * Ignore all characters if CREAD is not set.
472 */
473 if ((termios->c_cflag & CREAD) == 0)
474 port->ignore_status_mask |= UART_DUMMY_RSR_RX;
475
476 /* first, disable everything */
477 old_cr = UART_GET_CR(port) & ~UART010_CR_MSIE;
478
479 if (UART_ENABLE_MS(port, termios->c_cflag))
480 old_cr |= UART010_CR_MSIE;
481
482 UART_PUT_CR(port, 0);
483
484 /* Set baud rate */
485 quot -= 1;
486 UART_PUT_LCRM(port, ((quot & 0xf00) >> 8));
487 UART_PUT_LCRL(port, (quot & 0xff));
488
489 /*
490 * ----------v----------v----------v----------v-----
491 * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
492 * ----------^----------^----------^----------^-----
493 */
494 UART_PUT_LCRH(port, lcr_h);
495 UART_PUT_CR(port, old_cr);
496
497 spin_unlock_irqrestore(&port->lock, flags);
498 }
499
500 static const char *pl010_type(struct uart_port *port)
501 {
502 return port->type == PORT_AMBA ? "AMBA" : NULL;
503 }
504
505 /*
506 * Release the memory region(s) being used by 'port'
507 */
508 static void pl010_release_port(struct uart_port *port)
509 {
510 release_mem_region(port->mapbase, UART_PORT_SIZE);
511 }
512
513 /*
514 * Request the memory region(s) being used by 'port'
515 */
516 static int pl010_request_port(struct uart_port *port)
517 {
518 return request_mem_region(port->mapbase, UART_PORT_SIZE, "uart-pl010")
519 != NULL ? 0 : -EBUSY;
520 }
521
522 /*
523 * Configure/autoconfigure the port.
524 */
525 static void pl010_config_port(struct uart_port *port, int flags)
526 {
527 if (flags & UART_CONFIG_TYPE) {
528 port->type = PORT_AMBA;
529 pl010_request_port(port);
530 }
531 }
532
533 /*
534 * verify the new serial_struct (for TIOCSSERIAL).
535 */
536 static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
537 {
538 int ret = 0;
539 if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
540 ret = -EINVAL;
541 if (ser->irq < 0 || ser->irq >= NR_IRQS)
542 ret = -EINVAL;
543 if (ser->baud_base < 9600)
544 ret = -EINVAL;
545 return ret;
546 }
547
548 static struct uart_ops amba_pl010_pops = {
549 .tx_empty = pl010_tx_empty,
550 .set_mctrl = pl010_set_mctrl,
551 .get_mctrl = pl010_get_mctrl,
552 .stop_tx = pl010_stop_tx,
553 .start_tx = pl010_start_tx,
554 .stop_rx = pl010_stop_rx,
555 .enable_ms = pl010_enable_ms,
556 .break_ctl = pl010_break_ctl,
557 .startup = pl010_startup,
558 .shutdown = pl010_shutdown,
559 .set_termios = pl010_set_termios,
560 .type = pl010_type,
561 .release_port = pl010_release_port,
562 .request_port = pl010_request_port,
563 .config_port = pl010_config_port,
564 .verify_port = pl010_verify_port,
565 };
566
567 static struct uart_amba_port amba_ports[UART_NR] = {
568 {
569 .port = {
570 .membase = (void *)IO_ADDRESS(INTEGRATOR_UART0_BASE),
571 .mapbase = INTEGRATOR_UART0_BASE,
572 .iotype = SERIAL_IO_MEM,
573 .irq = IRQ_UARTINT0,
574 .uartclk = 14745600,
575 .fifosize = 16,
576 .ops = &amba_pl010_pops,
577 .flags = ASYNC_BOOT_AUTOCONF,
578 .line = 0,
579 },
580 .dtr_mask = 1 << 5,
581 .rts_mask = 1 << 4,
582 },
583 {
584 .port = {
585 .membase = (void *)IO_ADDRESS(INTEGRATOR_UART1_BASE),
586 .mapbase = INTEGRATOR_UART1_BASE,
587 .iotype = SERIAL_IO_MEM,
588 .irq = IRQ_UARTINT1,
589 .uartclk = 14745600,
590 .fifosize = 16,
591 .ops = &amba_pl010_pops,
592 .flags = ASYNC_BOOT_AUTOCONF,
593 .line = 1,
594 },
595 .dtr_mask = 1 << 7,
596 .rts_mask = 1 << 6,
597 }
598 };
599
600 #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
601
602 static void
603 pl010_console_write(struct console *co, const char *s, unsigned int count)
604 {
605 struct uart_port *port = &amba_ports[co->index].port;
606 unsigned int status, old_cr;
607 int i;
608
609 /*
610 * First save the CR then disable the interrupts
611 */
612 old_cr = UART_GET_CR(port);
613 UART_PUT_CR(port, UART01x_CR_UARTEN);
614
615 /*
616 * Now, do each character
617 */
618 for (i = 0; i < count; i++) {
619 do {
620 status = UART_GET_FR(port);
621 } while (!UART_TX_READY(status));
622 UART_PUT_CHAR(port, s[i]);
623 if (s[i] == '\n') {
624 do {
625 status = UART_GET_FR(port);
626 } while (!UART_TX_READY(status));
627 UART_PUT_CHAR(port, '\r');
628 }
629 }
630
631 /*
632 * Finally, wait for transmitter to become empty
633 * and restore the TCR
634 */
635 do {
636 status = UART_GET_FR(port);
637 } while (status & UART01x_FR_BUSY);
638 UART_PUT_CR(port, old_cr);
639 }
640
641 static void __init
642 pl010_console_get_options(struct uart_port *port, int *baud,
643 int *parity, int *bits)
644 {
645 if (UART_GET_CR(port) & UART01x_CR_UARTEN) {
646 unsigned int lcr_h, quot;
647 lcr_h = UART_GET_LCRH(port);
648
649 *parity = 'n';
650 if (lcr_h & UART01x_LCRH_PEN) {
651 if (lcr_h & UART01x_LCRH_EPS)
652 *parity = 'e';
653 else
654 *parity = 'o';
655 }
656
657 if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
658 *bits = 7;
659 else
660 *bits = 8;
661
662 quot = UART_GET_LCRL(port) | UART_GET_LCRM(port) << 8;
663 *baud = port->uartclk / (16 * (quot + 1));
664 }
665 }
666
667 static int __init pl010_console_setup(struct console *co, char *options)
668 {
669 struct uart_port *port;
670 int baud = 38400;
671 int bits = 8;
672 int parity = 'n';
673 int flow = 'n';
674
675 /*
676 * Check whether an invalid uart number has been specified, and
677 * if so, search for the first available port that does have
678 * console support.
679 */
680 if (co->index >= UART_NR)
681 co->index = 0;
682 port = &amba_ports[co->index].port;
683
684 if (options)
685 uart_parse_options(options, &baud, &parity, &bits, &flow);
686 else
687 pl010_console_get_options(port, &baud, &parity, &bits);
688
689 return uart_set_options(port, co, baud, parity, bits, flow);
690 }
691
692 extern struct uart_driver amba_reg;
693 static struct console amba_console = {
694 .name = "ttyAM",
695 .write = pl010_console_write,
696 .device = uart_console_device,
697 .setup = pl010_console_setup,
698 .flags = CON_PRINTBUFFER,
699 .index = -1,
700 .data = &amba_reg,
701 };
702
703 static int __init amba_console_init(void)
704 {
705 /*
706 * All port initializations are done statically
707 */
708 register_console(&amba_console);
709 return 0;
710 }
711 console_initcall(amba_console_init);
712
713 static int __init amba_late_console_init(void)
714 {
715 if (!(amba_console.flags & CON_ENABLED))
716 register_console(&amba_console);
717 return 0;
718 }
719 late_initcall(amba_late_console_init);
720
721 #define AMBA_CONSOLE &amba_console
722 #else
723 #define AMBA_CONSOLE NULL
724 #endif
725
726 static struct uart_driver amba_reg = {
727 .owner = THIS_MODULE,
728 .driver_name = "ttyAM",
729 .dev_name = "ttyAM",
730 .major = SERIAL_AMBA_MAJOR,
731 .minor = SERIAL_AMBA_MINOR,
732 .nr = UART_NR,
733 .cons = AMBA_CONSOLE,
734 };
735
736 static int pl010_probe(struct amba_device *dev, void *id)
737 {
738 int i;
739
740 for (i = 0; i < UART_NR; i++) {
741 if (amba_ports[i].port.mapbase != dev->res.start)
742 continue;
743
744 amba_ports[i].port.dev = &dev->dev;
745 uart_add_one_port(&amba_reg, &amba_ports[i].port);
746 amba_set_drvdata(dev, &amba_ports[i]);
747 break;
748 }
749
750 return 0;
751 }
752
753 static int pl010_remove(struct amba_device *dev)
754 {
755 struct uart_amba_port *uap = amba_get_drvdata(dev);
756
757 if (uap)
758 uart_remove_one_port(&amba_reg, &uap->port);
759
760 amba_set_drvdata(dev, NULL);
761
762 return 0;
763 }
764
765 static int pl010_suspend(struct amba_device *dev, pm_message_t state)
766 {
767 struct uart_amba_port *uap = amba_get_drvdata(dev);
768
769 if (uap)
770 uart_suspend_port(&amba_reg, &uap->port);
771
772 return 0;
773 }
774
775 static int pl010_resume(struct amba_device *dev)
776 {
777 struct uart_amba_port *uap = amba_get_drvdata(dev);
778
779 if (uap)
780 uart_resume_port(&amba_reg, &uap->port);
781
782 return 0;
783 }
784
785 static struct amba_id pl010_ids[] __initdata = {
786 {
787 .id = 0x00041010,
788 .mask = 0x000fffff,
789 },
790 { 0, 0 },
791 };
792
793 static struct amba_driver pl010_driver = {
794 .drv = {
795 .name = "uart-pl010",
796 },
797 .id_table = pl010_ids,
798 .probe = pl010_probe,
799 .remove = pl010_remove,
800 .suspend = pl010_suspend,
801 .resume = pl010_resume,
802 };
803
804 static int __init pl010_init(void)
805 {
806 int ret;
807
808 printk(KERN_INFO "Serial: AMBA driver $Revision: 1.41 $\n");
809
810 ret = uart_register_driver(&amba_reg);
811 if (ret == 0) {
812 ret = amba_driver_register(&pl010_driver);
813 if (ret)
814 uart_unregister_driver(&amba_reg);
815 }
816 return ret;
817 }
818
819 static void __exit pl010_exit(void)
820 {
821 amba_driver_unregister(&pl010_driver);
822 uart_unregister_driver(&amba_reg);
823 }
824
825 module_init(pl010_init);
826 module_exit(pl010_exit);
827
828 MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
829 MODULE_DESCRIPTION("ARM AMBA serial port driver $Revision: 1.41 $");
830 MODULE_LICENSE("GPL");
Verdex Pro support