?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[TG3]: Set minimal hw interrupt mitigation.
[linux-2.6/verdex.git] / drivers / serial / sunsu.c
blobddc97c905e14cc7a158a22f339379d0129e81551
1 /* $Id: su.c,v 1.55 2002/01/08 16:00:16 davem Exp $
2 * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI
3 *
4 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
5 * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com)
6 *
7 * This is mainly a variation of 8250.c, credits go to authors mentioned
8 * therein. In fact this driver should be merged into the generic 8250.c
9 * infrastructure perhaps using a 8250_sparc.c module.
10 *
11 * Fixed to use tty_get_baud_rate().
12 * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
13 *
14 * Converted to new 2.5.x UART layer.
15 * David S. Miller (davem@redhat.com), 2002-Jul-29
16 */
17
18 #include <linux/config.h>
19 #include <linux/module.h>
20 #include <linux/kernel.h>
21 #include <linux/sched.h>
22 #include <linux/spinlock.h>
23 #include <linux/errno.h>
24 #include <linux/tty.h>
25 #include <linux/tty_flip.h>
26 #include <linux/major.h>
27 #include <linux/string.h>
28 #include <linux/ptrace.h>
29 #include <linux/ioport.h>
30 #include <linux/circ_buf.h>
31 #include <linux/serial.h>
32 #include <linux/sysrq.h>
33 #include <linux/console.h>
34 #ifdef CONFIG_SERIO
35 #include <linux/serio.h>
36 #endif
37 #include <linux/serial_reg.h>
38 #include <linux/init.h>
39 #include <linux/delay.h>
40
41 #include <asm/io.h>
42 #include <asm/irq.h>
43 #include <asm/oplib.h>
44 #include <asm/ebus.h>
45 #ifdef CONFIG_SPARC64
46 #include <asm/isa.h>
47 #endif
48
49 #if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
50 #define SUPPORT_SYSRQ
51 #endif
52
53 #include <linux/serial_core.h>
54
55 #include "suncore.h"
56
57 /* We are on a NS PC87303 clocked with 24.0 MHz, which results
58 * in a UART clock of 1.8462 MHz.
59 */
60 #define SU_BASE_BAUD (1846200 / 16)
61
62 enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT };
63 static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" };
64
65 /*
66 * Here we define the default xmit fifo size used for each type of UART.
67 */
68 static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = {
69 { "unknown", 1, 0 },
70 { "8250", 1, 0 },
71 { "16450", 1, 0 },
72 { "16550", 1, 0 },
73 { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
74 { "Cirrus", 1, 0 },
75 { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
76 { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
77 { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO },
78 { "Startech", 1, 0 },
79 { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO },
80 { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
81 { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
82 { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO }
83 };
84
85 struct uart_sunsu_port {
86 struct uart_port port;
87 unsigned char acr;
88 unsigned char ier;
89 unsigned short rev;
90 unsigned char lcr;
91 unsigned int lsr_break_flag;
92 unsigned int cflag;
93
94 /* Probing information. */
95 enum su_type su_type;
96 unsigned int type_probed; /* XXX Stupid */
97 int port_node;
98
99 #ifdef CONFIG_SERIO
100 struct serio *serio;
101 int serio_open;
102 #endif
103 };
104
105 #define _INLINE_
106
107 static _INLINE_ unsigned int serial_in(struct uart_sunsu_port *up, int offset)
108 {
109 offset <<= up->port.regshift;
110
111 switch (up->port.iotype) {
112 case SERIAL_IO_HUB6:
113 outb(up->port.hub6 - 1 + offset, up->port.iobase);
114 return inb(up->port.iobase + 1);
115
116 case SERIAL_IO_MEM:
117 return readb(up->port.membase + offset);
118
119 default:
120 return inb(up->port.iobase + offset);
121 }
122 }
123
124 static _INLINE_ void
125 serial_out(struct uart_sunsu_port *up, int offset, int value)
126 {
127 #ifndef CONFIG_SPARC64
128 /*
129 * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are
130 * connected with a gate then go to SlavIO. When IRQ4 goes tristated
131 * gate outputs a logical one. Since we use level triggered interrupts
132 * we have lockup and watchdog reset. We cannot mask IRQ because
133 * keyboard shares IRQ with us (Word has it as Bob Smelik's design).
134 * This problem is similar to what Alpha people suffer, see serial.c.
135 */
136 if (offset == UART_MCR)
137 value |= UART_MCR_OUT2;
138 #endif
139 offset <<= up->port.regshift;
140
141 switch (up->port.iotype) {
142 case SERIAL_IO_HUB6:
143 outb(up->port.hub6 - 1 + offset, up->port.iobase);
144 outb(value, up->port.iobase + 1);
145 break;
146
147 case SERIAL_IO_MEM:
148 writeb(value, up->port.membase + offset);
149 break;
150
151 default:
152 outb(value, up->port.iobase + offset);
153 }
154 }
155
156 /*
157 * We used to support using pause I/O for certain machines. We
158 * haven't supported this for a while, but just in case it's badly
159 * needed for certain old 386 machines, I've left these #define's
160 * in....
161 */
162 #define serial_inp(up, offset) serial_in(up, offset)
163 #define serial_outp(up, offset, value) serial_out(up, offset, value)
164
165
166 /*
167 * For the 16C950
168 */
169 static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value)
170 {
171 serial_out(up, UART_SCR, offset);
172 serial_out(up, UART_ICR, value);
173 }
174
175 #if 0 /* Unused currently */
176 static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset)
177 {
178 unsigned int value;
179
180 serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
181 serial_out(up, UART_SCR, offset);
182 value = serial_in(up, UART_ICR);
183 serial_icr_write(up, UART_ACR, up->acr);
184
185 return value;
186 }
187 #endif
188
189 #ifdef CONFIG_SERIAL_8250_RSA
190 /*
191 * Attempts to turn on the RSA FIFO. Returns zero on failure.
192 * We set the port uart clock rate if we succeed.
193 */
194 static int __enable_rsa(struct uart_sunsu_port *up)
195 {
196 unsigned char mode;
197 int result;
198
199 mode = serial_inp(up, UART_RSA_MSR);
200 result = mode & UART_RSA_MSR_FIFO;
201
202 if (!result) {
203 serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
204 mode = serial_inp(up, UART_RSA_MSR);
205 result = mode & UART_RSA_MSR_FIFO;
206 }
207
208 if (result)
209 up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
210
211 return result;
212 }
213
214 static void enable_rsa(struct uart_sunsu_port *up)
215 {
216 if (up->port.type == PORT_RSA) {
217 if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
218 spin_lock_irq(&up->port.lock);
219 __enable_rsa(up);
220 spin_unlock_irq(&up->port.lock);
221 }
222 if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
223 serial_outp(up, UART_RSA_FRR, 0);
224 }
225 }
226
227 /*
228 * Attempts to turn off the RSA FIFO. Returns zero on failure.
229 * It is unknown why interrupts were disabled in here. However,
230 * the caller is expected to preserve this behaviour by grabbing
231 * the spinlock before calling this function.
232 */
233 static void disable_rsa(struct uart_sunsu_port *up)
234 {
235 unsigned char mode;
236 int result;
237
238 if (up->port.type == PORT_RSA &&
239 up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
240 spin_lock_irq(&up->port.lock);
241
242 mode = serial_inp(up, UART_RSA_MSR);
243 result = !(mode & UART_RSA_MSR_FIFO);
244
245 if (!result) {
246 serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
247 mode = serial_inp(up, UART_RSA_MSR);
248 result = !(mode & UART_RSA_MSR_FIFO);
249 }
250
251 if (result)
252 up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
253 spin_unlock_irq(&up->port.lock);
254 }
255 }
256 #endif /* CONFIG_SERIAL_8250_RSA */
257
258 static void sunsu_stop_tx(struct uart_port *port, unsigned int tty_stop)
259 {
260 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
261
262 if (up->ier & UART_IER_THRI) {
263 up->ier &= ~UART_IER_THRI;
264 serial_out(up, UART_IER, up->ier);
265 }
266 if (up->port.type == PORT_16C950 && tty_stop) {
267 up->acr |= UART_ACR_TXDIS;
268 serial_icr_write(up, UART_ACR, up->acr);
269 }
270 }
271
272 static void sunsu_start_tx(struct uart_port *port, unsigned int tty_start)
273 {
274 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
275
276 if (!(up->ier & UART_IER_THRI)) {
277 up->ier |= UART_IER_THRI;
278 serial_out(up, UART_IER, up->ier);
279 }
280 /*
281 * We only do this from uart_start
282 */
283 if (tty_start && up->port.type == PORT_16C950) {
284 up->acr &= ~UART_ACR_TXDIS;
285 serial_icr_write(up, UART_ACR, up->acr);
286 }
287 }
288
289 static void sunsu_stop_rx(struct uart_port *port)
290 {
291 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
292 unsigned long flags;
293
294 spin_lock_irqsave(&up->port.lock, flags);
295 up->ier &= ~UART_IER_RLSI;
296 up->port.read_status_mask &= ~UART_LSR_DR;
297 serial_out(up, UART_IER, up->ier);
298 spin_unlock_irqrestore(&up->port.lock, flags);
299 }
300
301 static void sunsu_enable_ms(struct uart_port *port)
302 {
303 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
304 unsigned long flags;
305
306 spin_lock_irqsave(&up->port.lock, flags);
307 up->ier |= UART_IER_MSI;
308 serial_out(up, UART_IER, up->ier);
309 spin_unlock_irqrestore(&up->port.lock, flags);
310 }
311
312 static _INLINE_ struct tty_struct *
313 receive_chars(struct uart_sunsu_port *up, unsigned char *status, struct pt_regs *regs)
314 {
315 struct tty_struct *tty = up->port.info->tty;
316 unsigned char ch;
317 int max_count = 256;
318 int saw_console_brk = 0;
319
320 do {
321 if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
322 tty->flip.work.func((void *)tty);
323 if (tty->flip.count >= TTY_FLIPBUF_SIZE)
324 return tty; // if TTY_DONT_FLIP is set
325 }
326 ch = serial_inp(up, UART_RX);
327 *tty->flip.char_buf_ptr = ch;
328 *tty->flip.flag_buf_ptr = TTY_NORMAL;
329 up->port.icount.rx++;
330
331 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
332 UART_LSR_FE | UART_LSR_OE))) {
333 /*
334 * For statistics only
335 */
336 if (*status & UART_LSR_BI) {
337 *status &= ~(UART_LSR_FE | UART_LSR_PE);
338 up->port.icount.brk++;
339 if (up->port.cons != NULL &&
340 up->port.line == up->port.cons->index)
341 saw_console_brk = 1;
342 /*
343 * We do the SysRQ and SAK checking
344 * here because otherwise the break
345 * may get masked by ignore_status_mask
346 * or read_status_mask.
347 */
348 if (uart_handle_break(&up->port))
349 goto ignore_char;
350 } else if (*status & UART_LSR_PE)
351 up->port.icount.parity++;
352 else if (*status & UART_LSR_FE)
353 up->port.icount.frame++;
354 if (*status & UART_LSR_OE)
355 up->port.icount.overrun++;
356
357 /*
358 * Mask off conditions which should be ingored.
359 */
360 *status &= up->port.read_status_mask;
361
362 if (up->port.cons != NULL &&
363 up->port.line == up->port.cons->index) {
364 /* Recover the break flag from console xmit */
365 *status |= up->lsr_break_flag;
366 up->lsr_break_flag = 0;
367 }
368
369 if (*status & UART_LSR_BI) {
370 *tty->flip.flag_buf_ptr = TTY_BREAK;
371 } else if (*status & UART_LSR_PE)
372 *tty->flip.flag_buf_ptr = TTY_PARITY;
373 else if (*status & UART_LSR_FE)
374 *tty->flip.flag_buf_ptr = TTY_FRAME;
375 }
376 if (uart_handle_sysrq_char(&up->port, ch, regs))
377 goto ignore_char;
378 if ((*status & up->port.ignore_status_mask) == 0) {
379 tty->flip.flag_buf_ptr++;
380 tty->flip.char_buf_ptr++;
381 tty->flip.count++;
382 }
383 if ((*status & UART_LSR_OE) &&
384 tty->flip.count < TTY_FLIPBUF_SIZE) {
385 /*
386 * Overrun is special, since it's reported
387 * immediately, and doesn't affect the current
388 * character.
389 */
390 *tty->flip.flag_buf_ptr = TTY_OVERRUN;
391 tty->flip.flag_buf_ptr++;
392 tty->flip.char_buf_ptr++;
393 tty->flip.count++;
394 }
395 ignore_char:
396 *status = serial_inp(up, UART_LSR);
397 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
398
399 if (saw_console_brk)
400 sun_do_break();
401
402 return tty;
403 }
404
405 static _INLINE_ void transmit_chars(struct uart_sunsu_port *up)
406 {
407 struct circ_buf *xmit = &up->port.info->xmit;
408 int count;
409
410 if (up->port.x_char) {
411 serial_outp(up, UART_TX, up->port.x_char);
412 up->port.icount.tx++;
413 up->port.x_char = 0;
414 return;
415 }
416 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
417 sunsu_stop_tx(&up->port, 0);
418 return;
419 }
420
421 count = up->port.fifosize;
422 do {
423 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
424 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
425 up->port.icount.tx++;
426 if (uart_circ_empty(xmit))
427 break;
428 } while (--count > 0);
429
430 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
431 uart_write_wakeup(&up->port);
432
433 if (uart_circ_empty(xmit))
434 sunsu_stop_tx(&up->port, 0);
435 }
436
437 static _INLINE_ void check_modem_status(struct uart_sunsu_port *up)
438 {
439 int status;
440
441 status = serial_in(up, UART_MSR);
442
443 if ((status & UART_MSR_ANY_DELTA) == 0)
444 return;
445
446 if (status & UART_MSR_TERI)
447 up->port.icount.rng++;
448 if (status & UART_MSR_DDSR)
449 up->port.icount.dsr++;
450 if (status & UART_MSR_DDCD)
451 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
452 if (status & UART_MSR_DCTS)
453 uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
454
455 wake_up_interruptible(&up->port.info->delta_msr_wait);
456 }
457
458 static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id, struct pt_regs *regs)
459 {
460 struct uart_sunsu_port *up = dev_id;
461 unsigned long flags;
462 unsigned char status;
463
464 spin_lock_irqsave(&up->port.lock, flags);
465
466 do {
467 struct tty_struct *tty;
468
469 status = serial_inp(up, UART_LSR);
470 tty = NULL;
471 if (status & UART_LSR_DR)
472 tty = receive_chars(up, &status, regs);
473 check_modem_status(up);
474 if (status & UART_LSR_THRE)
475 transmit_chars(up);
476
477 spin_unlock_irqrestore(&up->port.lock, flags);
478
479 if (tty)
480 tty_flip_buffer_push(tty);
481
482 spin_lock_irqsave(&up->port.lock, flags);
483
484 } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT));
485
486 spin_unlock_irqrestore(&up->port.lock, flags);
487
488 return IRQ_HANDLED;
489 }
490
491 /* Separate interrupt handling path for keyboard/mouse ports. */
492
493 static void
494 sunsu_change_speed(struct uart_port *port, unsigned int cflag,
495 unsigned int iflag, unsigned int quot);
496
497 static void sunsu_change_mouse_baud(struct uart_sunsu_port *up)
498 {
499 unsigned int cur_cflag = up->cflag;
500 int quot, new_baud;
501
502 up->cflag &= ~CBAUD;
503 up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
504
505 quot = up->port.uartclk / (16 * new_baud);
506
507 spin_unlock(&up->port.lock);
508
509 sunsu_change_speed(&up->port, up->cflag, 0, quot);
510
511 spin_lock(&up->port.lock);
512 }
513
514 static void receive_kbd_ms_chars(struct uart_sunsu_port *up, struct pt_regs *regs, int is_break)
515 {
516 do {
517 unsigned char ch = serial_inp(up, UART_RX);
518
519 /* Stop-A is handled by drivers/char/keyboard.c now. */
520 if (up->su_type == SU_PORT_KBD) {
521 #ifdef CONFIG_SERIO
522 serio_interrupt(up->serio, ch, 0, regs);
523 #endif
524 } else if (up->su_type == SU_PORT_MS) {
525 int ret = suncore_mouse_baud_detection(ch, is_break);
526
527 switch (ret) {
528 case 2:
529 sunsu_change_mouse_baud(up);
530 /* fallthru */
531 case 1:
532 break;
533
534 case 0:
535 #ifdef CONFIG_SERIO
536 serio_interrupt(up->serio, ch, 0, regs);
537 #endif
538 break;
539 };
540 }
541 } while (serial_in(up, UART_LSR) & UART_LSR_DR);
542 }
543
544 static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id, struct pt_regs *regs)
545 {
546 struct uart_sunsu_port *up = dev_id;
547
548 if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) {
549 unsigned char status = serial_inp(up, UART_LSR);
550
551 if ((status & UART_LSR_DR) || (status & UART_LSR_BI))
552 receive_kbd_ms_chars(up, regs,
553 (status & UART_LSR_BI) != 0);
554 }
555
556 return IRQ_HANDLED;
557 }
558
559 static unsigned int sunsu_tx_empty(struct uart_port *port)
560 {
561 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
562 unsigned long flags;
563 unsigned int ret;
564
565 spin_lock_irqsave(&up->port.lock, flags);
566 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
567 spin_unlock_irqrestore(&up->port.lock, flags);
568
569 return ret;
570 }
571
572 static unsigned int sunsu_get_mctrl(struct uart_port *port)
573 {
574 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
575 unsigned long flags;
576 unsigned char status;
577 unsigned int ret;
578
579 spin_lock_irqsave(&up->port.lock, flags);
580 status = serial_in(up, UART_MSR);
581 spin_unlock_irqrestore(&up->port.lock, flags);
582
583 ret = 0;
584 if (status & UART_MSR_DCD)
585 ret |= TIOCM_CAR;
586 if (status & UART_MSR_RI)
587 ret |= TIOCM_RNG;
588 if (status & UART_MSR_DSR)
589 ret |= TIOCM_DSR;
590 if (status & UART_MSR_CTS)
591 ret |= TIOCM_CTS;
592 return ret;
593 }
594
595 static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl)
596 {
597 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
598 unsigned char mcr = 0;
599
600 if (mctrl & TIOCM_RTS)
601 mcr |= UART_MCR_RTS;
602 if (mctrl & TIOCM_DTR)
603 mcr |= UART_MCR_DTR;
604 if (mctrl & TIOCM_OUT1)
605 mcr |= UART_MCR_OUT1;
606 if (mctrl & TIOCM_OUT2)
607 mcr |= UART_MCR_OUT2;
608 if (mctrl & TIOCM_LOOP)
609 mcr |= UART_MCR_LOOP;
610
611 serial_out(up, UART_MCR, mcr);
612 }
613
614 static void sunsu_break_ctl(struct uart_port *port, int break_state)
615 {
616 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
617 unsigned long flags;
618
619 spin_lock_irqsave(&up->port.lock, flags);
620 if (break_state == -1)
621 up->lcr |= UART_LCR_SBC;
622 else
623 up->lcr &= ~UART_LCR_SBC;
624 serial_out(up, UART_LCR, up->lcr);
625 spin_unlock_irqrestore(&up->port.lock, flags);
626 }
627
628 static int sunsu_startup(struct uart_port *port)
629 {
630 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
631 unsigned long flags;
632 int retval;
633
634 if (up->port.type == PORT_16C950) {
635 /* Wake up and initialize UART */
636 up->acr = 0;
637 serial_outp(up, UART_LCR, 0xBF);
638 serial_outp(up, UART_EFR, UART_EFR_ECB);
639 serial_outp(up, UART_IER, 0);
640 serial_outp(up, UART_LCR, 0);
641 serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
642 serial_outp(up, UART_LCR, 0xBF);
643 serial_outp(up, UART_EFR, UART_EFR_ECB);
644 serial_outp(up, UART_LCR, 0);
645 }
646
647 #ifdef CONFIG_SERIAL_8250_RSA
648 /*
649 * If this is an RSA port, see if we can kick it up to the
650 * higher speed clock.
651 */
652 enable_rsa(up);
653 #endif
654
655 /*
656 * Clear the FIFO buffers and disable them.
657 * (they will be reeanbled in set_termios())
658 */
659 if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
660 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
661 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
662 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
663 serial_outp(up, UART_FCR, 0);
664 }
665
666 /*
667 * Clear the interrupt registers.
668 */
669 (void) serial_inp(up, UART_LSR);
670 (void) serial_inp(up, UART_RX);
671 (void) serial_inp(up, UART_IIR);
672 (void) serial_inp(up, UART_MSR);
673
674 /*
675 * At this point, there's no way the LSR could still be 0xff;
676 * if it is, then bail out, because there's likely no UART
677 * here.
678 */
679 if (!(up->port.flags & ASYNC_BUGGY_UART) &&
680 (serial_inp(up, UART_LSR) == 0xff)) {
681 printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
682 return -ENODEV;
683 }
684
685 if (up->su_type != SU_PORT_PORT) {
686 retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt,
687 SA_SHIRQ, su_typev[up->su_type], up);
688 } else {
689 retval = request_irq(up->port.irq, sunsu_serial_interrupt,
690 SA_SHIRQ, su_typev[up->su_type], up);
691 }
692 if (retval) {
693 printk("su: Cannot register IRQ %d\n", up->port.irq);
694 return retval;
695 }
696
697 /*
698 * Now, initialize the UART
699 */
700 serial_outp(up, UART_LCR, UART_LCR_WLEN8);
701
702 spin_lock_irqsave(&up->port.lock, flags);
703
704 up->port.mctrl |= TIOCM_OUT2;
705
706 sunsu_set_mctrl(&up->port, up->port.mctrl);
707 spin_unlock_irqrestore(&up->port.lock, flags);
708
709 /*
710 * Finally, enable interrupts. Note: Modem status interrupts
711 * are set via set_termios(), which will be occurring imminently
712 * anyway, so we don't enable them here.
713 */
714 up->ier = UART_IER_RLSI | UART_IER_RDI;
715 serial_outp(up, UART_IER, up->ier);
716
717 if (up->port.flags & ASYNC_FOURPORT) {
718 unsigned int icp;
719 /*
720 * Enable interrupts on the AST Fourport board
721 */
722 icp = (up->port.iobase & 0xfe0) | 0x01f;
723 outb_p(0x80, icp);
724 (void) inb_p(icp);
725 }
726
727 /*
728 * And clear the interrupt registers again for luck.
729 */
730 (void) serial_inp(up, UART_LSR);
731 (void) serial_inp(up, UART_RX);
732 (void) serial_inp(up, UART_IIR);
733 (void) serial_inp(up, UART_MSR);
734
735 return 0;
736 }
737
738 static void sunsu_shutdown(struct uart_port *port)
739 {
740 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
741 unsigned long flags;
742
743 /*
744 * Disable interrupts from this port
745 */
746 up->ier = 0;
747 serial_outp(up, UART_IER, 0);
748
749 spin_lock_irqsave(&up->port.lock, flags);
750 if (up->port.flags & ASYNC_FOURPORT) {
751 /* reset interrupts on the AST Fourport board */
752 inb((up->port.iobase & 0xfe0) | 0x1f);
753 up->port.mctrl |= TIOCM_OUT1;
754 } else
755 up->port.mctrl &= ~TIOCM_OUT2;
756
757 sunsu_set_mctrl(&up->port, up->port.mctrl);
758 spin_unlock_irqrestore(&up->port.lock, flags);
759
760 /*
761 * Disable break condition and FIFOs
762 */
763 serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
764 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
765 UART_FCR_CLEAR_RCVR |
766 UART_FCR_CLEAR_XMIT);
767 serial_outp(up, UART_FCR, 0);
768
769 #ifdef CONFIG_SERIAL_8250_RSA
770 /*
771 * Reset the RSA board back to 115kbps compat mode.
772 */
773 disable_rsa(up);
774 #endif
775
776 /*
777 * Read data port to reset things.
778 */
779 (void) serial_in(up, UART_RX);
780
781 free_irq(up->port.irq, up);
782 }
783
784 static void
785 sunsu_change_speed(struct uart_port *port, unsigned int cflag,
786 unsigned int iflag, unsigned int quot)
787 {
788 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
789 unsigned char cval, fcr = 0;
790 unsigned long flags;
791
792 switch (cflag & CSIZE) {
793 case CS5:
794 cval = 0x00;
795 break;
796 case CS6:
797 cval = 0x01;
798 break;
799 case CS7:
800 cval = 0x02;
801 break;
802 default:
803 case CS8:
804 cval = 0x03;
805 break;
806 }
807
808 if (cflag & CSTOPB)
809 cval |= 0x04;
810 if (cflag & PARENB)
811 cval |= UART_LCR_PARITY;
812 if (!(cflag & PARODD))
813 cval |= UART_LCR_EPAR;
814 #ifdef CMSPAR
815 if (cflag & CMSPAR)
816 cval |= UART_LCR_SPAR;
817 #endif
818
819 /*
820 * Work around a bug in the Oxford Semiconductor 952 rev B
821 * chip which causes it to seriously miscalculate baud rates
822 * when DLL is 0.
823 */
824 if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 &&
825 up->rev == 0x5201)
826 quot ++;
827
828 if (uart_config[up->port.type].flags & UART_USE_FIFO) {
829 if ((up->port.uartclk / quot) < (2400 * 16))
830 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
831 #ifdef CONFIG_SERIAL_8250_RSA
832 else if (up->port.type == PORT_RSA)
833 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14;
834 #endif
835 else
836 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
837 }
838 if (up->port.type == PORT_16750)
839 fcr |= UART_FCR7_64BYTE;
840
841 /*
842 * Ok, we're now changing the port state. Do it with
843 * interrupts disabled.
844 */
845 spin_lock_irqsave(&up->port.lock, flags);
846
847 /*
848 * Update the per-port timeout.
849 */
850 uart_update_timeout(port, cflag, (port->uartclk / (16 * quot)));
851
852 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
853 if (iflag & INPCK)
854 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
855 if (iflag & (BRKINT | PARMRK))
856 up->port.read_status_mask |= UART_LSR_BI;
857
858 /*
859 * Characteres to ignore
860 */
861 up->port.ignore_status_mask = 0;
862 if (iflag & IGNPAR)
863 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
864 if (iflag & IGNBRK) {
865 up->port.ignore_status_mask |= UART_LSR_BI;
866 /*
867 * If we're ignoring parity and break indicators,
868 * ignore overruns too (for real raw support).
869 */
870 if (iflag & IGNPAR)
871 up->port.ignore_status_mask |= UART_LSR_OE;
872 }
873
874 /*
875 * ignore all characters if CREAD is not set
876 */
877 if ((cflag & CREAD) == 0)
878 up->port.ignore_status_mask |= UART_LSR_DR;
879
880 /*
881 * CTS flow control flag and modem status interrupts
882 */
883 up->ier &= ~UART_IER_MSI;
884 if (UART_ENABLE_MS(&up->port, cflag))
885 up->ier |= UART_IER_MSI;
886
887 serial_out(up, UART_IER, up->ier);
888
889 if (uart_config[up->port.type].flags & UART_STARTECH) {
890 serial_outp(up, UART_LCR, 0xBF);
891 serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);
892 }
893 serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
894 serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
895 serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
896 if (up->port.type == PORT_16750)
897 serial_outp(up, UART_FCR, fcr); /* set fcr */
898 serial_outp(up, UART_LCR, cval); /* reset DLAB */
899 up->lcr = cval; /* Save LCR */
900 if (up->port.type != PORT_16750) {
901 if (fcr & UART_FCR_ENABLE_FIFO) {
902 /* emulated UARTs (Lucent Venus 167x) need two steps */
903 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
904 }
905 serial_outp(up, UART_FCR, fcr); /* set fcr */
906 }
907
908 up->cflag = cflag;
909
910 spin_unlock_irqrestore(&up->port.lock, flags);
911 }
912
913 static void
914 sunsu_set_termios(struct uart_port *port, struct termios *termios,
915 struct termios *old)
916 {
917 unsigned int baud, quot;
918
919 /*
920 * Ask the core to calculate the divisor for us.
921 */
922 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
923 quot = uart_get_divisor(port, baud);
924
925 sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot);
926 }
927
928 static void sunsu_release_port(struct uart_port *port)
929 {
930 }
931
932 static int sunsu_request_port(struct uart_port *port)
933 {
934 return 0;
935 }
936
937 static void sunsu_config_port(struct uart_port *port, int flags)
938 {
939 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
940
941 if (flags & UART_CONFIG_TYPE) {
942 /*
943 * We are supposed to call autoconfig here, but this requires
944 * splitting all the OBP probing crap from the UART probing.
945 * We'll do it when we kill sunsu.c altogether.
946 */
947 port->type = up->type_probed; /* XXX */
948 }
949 }
950
951 static int
952 sunsu_verify_port(struct uart_port *port, struct serial_struct *ser)
953 {
954 return -EINVAL;
955 }
956
957 static const char *
958 sunsu_type(struct uart_port *port)
959 {
960 int type = port->type;
961
962 if (type >= ARRAY_SIZE(uart_config))
963 type = 0;
964 return uart_config[type].name;
965 }
966
967 static struct uart_ops sunsu_pops = {
968 .tx_empty = sunsu_tx_empty,
969 .set_mctrl = sunsu_set_mctrl,
970 .get_mctrl = sunsu_get_mctrl,
971 .stop_tx = sunsu_stop_tx,
972 .start_tx = sunsu_start_tx,
973 .stop_rx = sunsu_stop_rx,
974 .enable_ms = sunsu_enable_ms,
975 .break_ctl = sunsu_break_ctl,
976 .startup = sunsu_startup,
977 .shutdown = sunsu_shutdown,
978 .set_termios = sunsu_set_termios,
979 .type = sunsu_type,
980 .release_port = sunsu_release_port,
981 .request_port = sunsu_request_port,
982 .config_port = sunsu_config_port,
983 .verify_port = sunsu_verify_port,
984 };
985
986 #define UART_NR 4
987
988 static struct uart_sunsu_port sunsu_ports[UART_NR];
989
990 #ifdef CONFIG_SERIO
991
992 static DEFINE_SPINLOCK(sunsu_serio_lock);
993
994 static int sunsu_serio_write(struct serio *serio, unsigned char ch)
995 {
996 struct uart_sunsu_port *up = serio->port_data;
997 unsigned long flags;
998 int lsr;
999
1000 spin_lock_irqsave(&sunsu_serio_lock, flags);
1001
1002 do {
1003 lsr = serial_in(up, UART_LSR);
1004 } while (!(lsr & UART_LSR_THRE));
1005
1006 /* Send the character out. */
1007 serial_out(up, UART_TX, ch);
1008
1009 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1010
1011 return 0;
1012 }
1013
1014 static int sunsu_serio_open(struct serio *serio)
1015 {
1016 struct uart_sunsu_port *up = serio->port_data;
1017 unsigned long flags;
1018 int ret;
1019
1020 spin_lock_irqsave(&sunsu_serio_lock, flags);
1021 if (!up->serio_open) {
1022 up->serio_open = 1;
1023 ret = 0;
1024 } else
1025 ret = -EBUSY;
1026 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1027
1028 return ret;
1029 }
1030
1031 static void sunsu_serio_close(struct serio *serio)
1032 {
1033 struct uart_sunsu_port *up = serio->port_data;
1034 unsigned long flags;
1035
1036 spin_lock_irqsave(&sunsu_serio_lock, flags);
1037 up->serio_open = 0;
1038 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1039 }
1040
1041 #endif /* CONFIG_SERIO */
1042
1043 static void sunsu_autoconfig(struct uart_sunsu_port *up)
1044 {
1045 unsigned char status1, status2, scratch, scratch2, scratch3;
1046 unsigned char save_lcr, save_mcr;
1047 struct linux_ebus_device *dev = NULL;
1048 struct linux_ebus *ebus;
1049 #ifdef CONFIG_SPARC64
1050 struct sparc_isa_bridge *isa_br;
1051 struct sparc_isa_device *isa_dev;
1052 #endif
1053 #ifndef CONFIG_SPARC64
1054 struct linux_prom_registers reg0;
1055 #endif
1056 unsigned long flags;
1057
1058 if (!up->port_node || !up->su_type)
1059 return;
1060
1061 up->type_probed = PORT_UNKNOWN;
1062 up->port.iotype = SERIAL_IO_MEM;
1063
1064 /*
1065 * First we look for Ebus-bases su's
1066 */
1067 for_each_ebus(ebus) {
1068 for_each_ebusdev(dev, ebus) {
1069 if (dev->prom_node == up->port_node) {
1070 /*
1071 * The EBus is broken on sparc; it delivers
1072 * virtual addresses in resources. Oh well...
1073 * This is correct on sparc64, though.
1074 */
1075 up->port.membase = (char *) dev->resource[0].start;
1076 /*
1077 * This is correct on both architectures.
1078 */
1079 up->port.mapbase = dev->resource[0].start;
1080 up->port.irq = dev->irqs[0];
1081 goto ebus_done;
1082 }
1083 }
1084 }
1085
1086 #ifdef CONFIG_SPARC64
1087 for_each_isa(isa_br) {
1088 for_each_isadev(isa_dev, isa_br) {
1089 if (isa_dev->prom_node == up->port_node) {
1090 /* Same on sparc64. Cool architecure... */
1091 up->port.membase = (char *) isa_dev->resource.start;
1092 up->port.mapbase = isa_dev->resource.start;
1093 up->port.irq = isa_dev->irq;
1094 goto ebus_done;
1095 }
1096 }
1097 }
1098 #endif
1099
1100 #ifdef CONFIG_SPARC64
1101 /*
1102 * Not on Ebus, bailing.
1103 */
1104 return;
1105 #else
1106 /*
1107 * Not on Ebus, must be OBIO.
1108 */
1109 if (prom_getproperty(up->port_node, "reg",
1110 (char *)&reg0, sizeof(reg0)) == -1) {
1111 prom_printf("sunsu: no \"reg\" property\n");
1112 return;
1113 }
1114 prom_apply_obio_ranges(&reg0, 1);
1115 if (reg0.which_io != 0) { /* Just in case... */
1116 prom_printf("sunsu: bus number nonzero: 0x%x:%x\n",
1117 reg0.which_io, reg0.phys_addr);
1118 return;
1119 }
1120 up->port.mapbase = reg0.phys_addr;
1121 if ((up->port.membase = ioremap(reg0.phys_addr, reg0.reg_size)) == 0) {
1122 prom_printf("sunsu: Cannot map registers.\n");
1123 return;
1124 }
1125
1126 /*
1127 * 0x20 is sun4m thing, Dave Redman heritage.
1128 * See arch/sparc/kernel/irq.c.
1129 */
1130 #define IRQ_4M(n) ((n)|0x20)
1131
1132 /*
1133 * There is no intr property on MrCoffee, so hardwire it.
1134 */
1135 up->port.irq = IRQ_4M(13);
1136 #endif
1137
1138 ebus_done:
1139
1140 spin_lock_irqsave(&up->port.lock, flags);
1141
1142 if (!(up->port.flags & ASYNC_BUGGY_UART)) {
1143 /*
1144 * Do a simple existence test first; if we fail this, there's
1145 * no point trying anything else.
1146 *
1147 * 0x80 is used as a nonsense port to prevent against false
1148 * positives due to ISA bus float. The assumption is that
1149 * 0x80 is a non-existent port; which should be safe since
1150 * include/asm/io.h also makes this assumption.
1151 */
1152 scratch = serial_inp(up, UART_IER);
1153 serial_outp(up, UART_IER, 0);
1154 #ifdef __i386__
1155 outb(0xff, 0x080);
1156 #endif
1157 scratch2 = serial_inp(up, UART_IER);
1158 serial_outp(up, UART_IER, 0x0f);
1159 #ifdef __i386__
1160 outb(0, 0x080);
1161 #endif
1162 scratch3 = serial_inp(up, UART_IER);
1163 serial_outp(up, UART_IER, scratch);
1164 if (scratch2 != 0 || scratch3 != 0x0F)
1165 goto out; /* We failed; there's nothing here */
1166 }
1167
1168 save_mcr = serial_in(up, UART_MCR);
1169 save_lcr = serial_in(up, UART_LCR);
1170
1171 /*
1172 * Check to see if a UART is really there. Certain broken
1173 * internal modems based on the Rockwell chipset fail this
1174 * test, because they apparently don't implement the loopback
1175 * test mode. So this test is skipped on the COM 1 through
1176 * COM 4 ports. This *should* be safe, since no board
1177 * manufacturer would be stupid enough to design a board
1178 * that conflicts with COM 1-4 --- we hope!
1179 */
1180 if (!(up->port.flags & ASYNC_SKIP_TEST)) {
1181 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
1182 status1 = serial_inp(up, UART_MSR) & 0xF0;
1183 serial_outp(up, UART_MCR, save_mcr);
1184 if (status1 != 0x90)
1185 goto out; /* We failed loopback test */
1186 }
1187 serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */
1188 serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */
1189 serial_outp(up, UART_LCR, 0);
1190 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1191 scratch = serial_in(up, UART_IIR) >> 6;
1192 switch (scratch) {
1193 case 0:
1194 up->port.type = PORT_16450;
1195 break;
1196 case 1:
1197 up->port.type = PORT_UNKNOWN;
1198 break;
1199 case 2:
1200 up->port.type = PORT_16550;
1201 break;
1202 case 3:
1203 up->port.type = PORT_16550A;
1204 break;
1205 }
1206 if (up->port.type == PORT_16550A) {
1207 /* Check for Startech UART's */
1208 serial_outp(up, UART_LCR, UART_LCR_DLAB);
1209 if (serial_in(up, UART_EFR) == 0) {
1210 up->port.type = PORT_16650;
1211 } else {
1212 serial_outp(up, UART_LCR, 0xBF);
1213 if (serial_in(up, UART_EFR) == 0)
1214 up->port.type = PORT_16650V2;
1215 }
1216 }
1217 if (up->port.type == PORT_16550A) {
1218 /* Check for TI 16750 */
1219 serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);
1220 serial_outp(up, UART_FCR,
1221 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1222 scratch = serial_in(up, UART_IIR) >> 5;
1223 if (scratch == 7) {
1224 /*
1225 * If this is a 16750, and not a cheap UART
1226 * clone, then it should only go into 64 byte
1227 * mode if the UART_FCR7_64BYTE bit was set
1228 * while UART_LCR_DLAB was latched.
1229 */
1230 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1231 serial_outp(up, UART_LCR, 0);
1232 serial_outp(up, UART_FCR,
1233 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1234 scratch = serial_in(up, UART_IIR) >> 5;
1235 if (scratch == 6)
1236 up->port.type = PORT_16750;
1237 }
1238 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1239 }
1240 serial_outp(up, UART_LCR, save_lcr);
1241 if (up->port.type == PORT_16450) {
1242 scratch = serial_in(up, UART_SCR);
1243 serial_outp(up, UART_SCR, 0xa5);
1244 status1 = serial_in(up, UART_SCR);
1245 serial_outp(up, UART_SCR, 0x5a);
1246 status2 = serial_in(up, UART_SCR);
1247 serial_outp(up, UART_SCR, scratch);
1248
1249 if ((status1 != 0xa5) || (status2 != 0x5a))
1250 up->port.type = PORT_8250;
1251 }
1252
1253 up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
1254
1255 if (up->port.type == PORT_UNKNOWN)
1256 goto out;
1257 up->type_probed = up->port.type; /* XXX */
1258
1259 /*
1260 * Reset the UART.
1261 */
1262 #ifdef CONFIG_SERIAL_8250_RSA
1263 if (up->port.type == PORT_RSA)
1264 serial_outp(up, UART_RSA_FRR, 0);
1265 #endif
1266 serial_outp(up, UART_MCR, save_mcr);
1267 serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |
1268 UART_FCR_CLEAR_RCVR |
1269 UART_FCR_CLEAR_XMIT));
1270 serial_outp(up, UART_FCR, 0);
1271 (void)serial_in(up, UART_RX);
1272 serial_outp(up, UART_IER, 0);
1273
1274 out:
1275 spin_unlock_irqrestore(&up->port.lock, flags);
1276 }
1277
1278 static struct uart_driver sunsu_reg = {
1279 .owner = THIS_MODULE,
1280 .driver_name = "serial",
1281 .devfs_name = "tts/",
1282 .dev_name = "ttyS",
1283 .major = TTY_MAJOR,
1284 };
1285
1286 static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel)
1287 {
1288 int quot, baud;
1289 #ifdef CONFIG_SERIO
1290 struct serio *serio;
1291 #endif
1292
1293 up->port.line = channel;
1294 up->port.type = PORT_UNKNOWN;
1295 up->port.uartclk = (SU_BASE_BAUD * 16);
1296
1297 if (up->su_type == SU_PORT_KBD) {
1298 up->cflag = B1200 | CS8 | CLOCAL | CREAD;
1299 baud = 1200;
1300 } else {
1301 up->cflag = B4800 | CS8 | CLOCAL | CREAD;
1302 baud = 4800;
1303 }
1304 quot = up->port.uartclk / (16 * baud);
1305
1306 sunsu_autoconfig(up);
1307 if (up->port.type == PORT_UNKNOWN)
1308 return -1;
1309
1310 printk(KERN_INFO "su%d at 0x%p (irq = %s) is a %s\n",
1311 channel,
1312 up->port.membase, __irq_itoa(up->port.irq),
1313 sunsu_type(&up->port));
1314
1315 #ifdef CONFIG_SERIO
1316 up->serio = serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
1317 if (serio) {
1318 memset(serio, 0, sizeof(*serio));
1319
1320 serio->port_data = up;
1321
1322 serio->id.type = SERIO_RS232;
1323 if (up->su_type == SU_PORT_KBD) {
1324 serio->id.proto = SERIO_SUNKBD;
1325 strlcpy(serio->name, "sukbd", sizeof(serio->name));
1326 } else {
1327 serio->id.proto = SERIO_SUN;
1328 serio->id.extra = 1;
1329 strlcpy(serio->name, "sums", sizeof(serio->name));
1330 }
1331 strlcpy(serio->phys, (channel == 0 ? "su/serio0" : "su/serio1"),
1332 sizeof(serio->phys));
1333
1334 serio->write = sunsu_serio_write;
1335 serio->open = sunsu_serio_open;
1336 serio->close = sunsu_serio_close;
1337
1338 serio_register_port(serio);
1339 } else {
1340 printk(KERN_WARNING "su%d: not enough memory for serio port\n",
1341 channel);
1342 }
1343 #endif
1344
1345 sunsu_change_speed(&up->port, up->cflag, 0, quot);
1346
1347 sunsu_startup(&up->port);
1348 return 0;
1349 }
1350
1351 /*
1352 * ------------------------------------------------------------
1353 * Serial console driver
1354 * ------------------------------------------------------------
1355 */
1356
1357 #ifdef CONFIG_SERIAL_SUNSU_CONSOLE
1358
1359 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
1360
1361 /*
1362 * Wait for transmitter & holding register to empty
1363 */
1364 static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up)
1365 {
1366 unsigned int status, tmout = 10000;
1367
1368 /* Wait up to 10ms for the character(s) to be sent. */
1369 do {
1370 status = serial_in(up, UART_LSR);
1371
1372 if (status & UART_LSR_BI)
1373 up->lsr_break_flag = UART_LSR_BI;
1374
1375 if (--tmout == 0)
1376 break;
1377 udelay(1);
1378 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
1379
1380 /* Wait up to 1s for flow control if necessary */
1381 if (up->port.flags & ASYNC_CONS_FLOW) {
1382 tmout = 1000000;
1383 while (--tmout &&
1384 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
1385 udelay(1);
1386 }
1387 }
1388
1389 /*
1390 * Print a string to the serial port trying not to disturb
1391 * any possible real use of the port...
1392 */
1393 static void sunsu_console_write(struct console *co, const char *s,
1394 unsigned int count)
1395 {
1396 struct uart_sunsu_port *up = &sunsu_ports[co->index];
1397 unsigned int ier;
1398 int i;
1399
1400 /*
1401 * First save the UER then disable the interrupts
1402 */
1403 ier = serial_in(up, UART_IER);
1404 serial_out(up, UART_IER, 0);
1405
1406 /*
1407 * Now, do each character
1408 */
1409 for (i = 0; i < count; i++, s++) {
1410 wait_for_xmitr(up);
1411
1412 /*
1413 * Send the character out.
1414 * If a LF, also do CR...
1415 */
1416 serial_out(up, UART_TX, *s);
1417 if (*s == 10) {
1418 wait_for_xmitr(up);
1419 serial_out(up, UART_TX, 13);
1420 }
1421 }
1422
1423 /*
1424 * Finally, wait for transmitter to become empty
1425 * and restore the IER
1426 */
1427 wait_for_xmitr(up);
1428 serial_out(up, UART_IER, ier);
1429 }
1430
1431 /*
1432 * Setup initial baud/bits/parity. We do two things here:
1433 * - construct a cflag setting for the first su_open()
1434 * - initialize the serial port
1435 * Return non-zero if we didn't find a serial port.
1436 */
1437 static int __init sunsu_console_setup(struct console *co, char *options)
1438 {
1439 struct uart_port *port;
1440 int baud = 9600;
1441 int bits = 8;
1442 int parity = 'n';
1443 int flow = 'n';
1444
1445 printk("Console: ttyS%d (SU)\n",
1446 (sunsu_reg.minor - 64) + co->index);
1447
1448 /*
1449 * Check whether an invalid uart number has been specified, and
1450 * if so, search for the first available port that does have
1451 * console support.
1452 */
1453 if (co->index >= UART_NR)
1454 co->index = 0;
1455 port = &sunsu_ports[co->index].port;
1456
1457 /*
1458 * Temporary fix.
1459 */
1460 spin_lock_init(&port->lock);
1461
1462 if (options)
1463 uart_parse_options(options, &baud, &parity, &bits, &flow);
1464
1465 return uart_set_options(port, co, baud, parity, bits, flow);
1466 }
1467
1468 static struct console sunsu_cons = {
1469 .name = "ttyS",
1470 .write = sunsu_console_write,
1471 .device = uart_console_device,
1472 .setup = sunsu_console_setup,
1473 .flags = CON_PRINTBUFFER,
1474 .index = -1,
1475 .data = &sunsu_reg,
1476 };
1477 #define SUNSU_CONSOLE (&sunsu_cons)
1478
1479 /*
1480 * Register console.
1481 */
1482
1483 static int __init sunsu_serial_console_init(void)
1484 {
1485 int i;
1486
1487 if (con_is_present())
1488 return 0;
1489
1490 for (i = 0; i < UART_NR; i++) {
1491 int this_minor = sunsu_reg.minor + i;
1492
1493 if ((this_minor - 64) == (serial_console - 1))
1494 break;
1495 }
1496 if (i == UART_NR)
1497 return 0;
1498 if (sunsu_ports[i].port_node == 0)
1499 return 0;
1500
1501 sunsu_cons.index = i;
1502 register_console(&sunsu_cons);
1503 return 0;
1504 }
1505 #else
1506 #define SUNSU_CONSOLE (NULL)
1507 #define sunsu_serial_console_init() do { } while (0)
1508 #endif
1509
1510 static int __init sunsu_serial_init(void)
1511 {
1512 int instance, ret, i;
1513
1514 /* How many instances do we need? */
1515 instance = 0;
1516 for (i = 0; i < UART_NR; i++) {
1517 struct uart_sunsu_port *up = &sunsu_ports[i];
1518
1519 if (up->su_type == SU_PORT_MS ||
1520 up->su_type == SU_PORT_KBD)
1521 continue;
1522
1523 up->port.flags |= ASYNC_BOOT_AUTOCONF;
1524 up->port.type = PORT_UNKNOWN;
1525 up->port.uartclk = (SU_BASE_BAUD * 16);
1526
1527 sunsu_autoconfig(up);
1528 if (up->port.type == PORT_UNKNOWN)
1529 continue;
1530
1531 up->port.line = instance++;
1532 up->port.ops = &sunsu_pops;
1533 }
1534
1535 sunsu_reg.minor = sunserial_current_minor;
1536 sunserial_current_minor += instance;
1537
1538 sunsu_reg.nr = instance;
1539 sunsu_reg.cons = SUNSU_CONSOLE;
1540
1541 ret = uart_register_driver(&sunsu_reg);
1542 if (ret < 0)
1543 return ret;
1544
1545 sunsu_serial_console_init();
1546 for (i = 0; i < UART_NR; i++) {
1547 struct uart_sunsu_port *up = &sunsu_ports[i];
1548
1549 /* Do not register Keyboard/Mouse lines with UART
1550 * layer.
1551 */
1552 if (up->su_type == SU_PORT_MS ||
1553 up->su_type == SU_PORT_KBD)
1554 continue;
1555
1556 if (up->port.type == PORT_UNKNOWN)
1557 continue;
1558
1559 uart_add_one_port(&sunsu_reg, &up->port);
1560 }
1561
1562 return 0;
1563 }
1564
1565 static int su_node_ok(int node, char *name, int namelen)
1566 {
1567 if (strncmp(name, "su", namelen) == 0 ||
1568 strncmp(name, "su_pnp", namelen) == 0)
1569 return 1;
1570
1571 if (strncmp(name, "serial", namelen) == 0) {
1572 char compat[32];
1573 int clen;
1574
1575 /* Is it _really_ a 'su' device? */
1576 clen = prom_getproperty(node, "compatible", compat, sizeof(compat));
1577 if (clen > 0) {
1578 if (strncmp(compat, "sab82532", 8) == 0) {
1579 /* Nope, Siemens serial, not for us. */
1580 return 0;
1581 }
1582 }
1583 return 1;
1584 }
1585
1586 return 0;
1587 }
1588
1589 #define SU_PROPSIZE 128
1590
1591 /*
1592 * Scan status structure.
1593 * "prop" is a local variable but it eats stack to keep it in each
1594 * stack frame of a recursive procedure.
1595 */
1596 struct su_probe_scan {
1597 int msnode, kbnode; /* PROM nodes for mouse and keyboard */
1598 int msx, kbx; /* minors for mouse and keyboard */
1599 int devices; /* scan index */
1600 char prop[SU_PROPSIZE];
1601 };
1602
1603 /*
1604 * We have several platforms which present 'su' in different parts
1605 * of the device tree. 'su' may be found under obio, ebus, isa and pci.
1606 * We walk over the tree and find them wherever PROM hides them.
1607 */
1608 static void __init su_probe_any(struct su_probe_scan *t, int sunode)
1609 {
1610 struct uart_sunsu_port *up;
1611 int len;
1612
1613 if (t->devices >= UART_NR)
1614 return;
1615
1616 for (; sunode != 0; sunode = prom_getsibling(sunode)) {
1617 len = prom_getproperty(sunode, "name", t->prop, SU_PROPSIZE);
1618 if (len <= 1)
1619 continue; /* Broken PROM node */
1620
1621 if (su_node_ok(sunode, t->prop, len)) {
1622 up = &sunsu_ports[t->devices];
1623 if (t->kbnode != 0 && sunode == t->kbnode) {
1624 t->kbx = t->devices;
1625 up->su_type = SU_PORT_KBD;
1626 } else if (t->msnode != 0 && sunode == t->msnode) {
1627 t->msx = t->devices;
1628 up->su_type = SU_PORT_MS;
1629 } else {
1630 #ifdef CONFIG_SPARC64
1631 /*
1632 * Do not attempt to use the truncated
1633 * keyboard/mouse ports as serial ports
1634 * on Ultras with PC keyboard attached.
1635 */
1636 if (prom_getbool(sunode, "mouse"))
1637 continue;
1638 if (prom_getbool(sunode, "keyboard"))
1639 continue;
1640 #endif
1641 up->su_type = SU_PORT_PORT;
1642 }
1643 up->port_node = sunode;
1644 ++t->devices;
1645 } else {
1646 su_probe_any(t, prom_getchild(sunode));
1647 }
1648 }
1649 }
1650
1651 static int __init sunsu_probe(void)
1652 {
1653 int node;
1654 int len;
1655 struct su_probe_scan scan;
1656
1657 /*
1658 * First, we scan the tree.
1659 */
1660 scan.devices = 0;
1661 scan.msx = -1;
1662 scan.kbx = -1;
1663 scan.kbnode = 0;
1664 scan.msnode = 0;
1665
1666 /*
1667 * Get the nodes for keyboard and mouse from 'aliases'...
1668 */
1669 node = prom_getchild(prom_root_node);
1670 node = prom_searchsiblings(node, "aliases");
1671 if (node != 0) {
1672 len = prom_getproperty(node, "keyboard", scan.prop, SU_PROPSIZE);
1673 if (len > 0) {
1674 scan.prop[len] = 0;
1675 scan.kbnode = prom_finddevice(scan.prop);
1676 }
1677
1678 len = prom_getproperty(node, "mouse", scan.prop, SU_PROPSIZE);
1679 if (len > 0) {
1680 scan.prop[len] = 0;
1681 scan.msnode = prom_finddevice(scan.prop);
1682 }
1683 }
1684
1685 su_probe_any(&scan, prom_getchild(prom_root_node));
1686
1687 /*
1688 * Second, we process the special case of keyboard and mouse.
1689 *
1690 * Currently if we got keyboard and mouse hooked to "su" ports
1691 * we do not use any possible remaining "su" as a serial port.
1692 * Thus, we ignore values of .msx and .kbx, then compact ports.
1693 */
1694 if (scan.msx != -1 && scan.kbx != -1) {
1695 sunsu_ports[0].su_type = SU_PORT_MS;
1696 sunsu_ports[0].port_node = scan.msnode;
1697 sunsu_kbd_ms_init(&sunsu_ports[0], 0);
1698
1699 sunsu_ports[1].su_type = SU_PORT_KBD;
1700 sunsu_ports[1].port_node = scan.kbnode;
1701 sunsu_kbd_ms_init(&sunsu_ports[1], 1);
1702
1703 return 0;
1704 }
1705
1706 if (scan.msx != -1 || scan.kbx != -1) {
1707 printk("sunsu_probe: cannot match keyboard and mouse, confused\n");
1708 return -ENODEV;
1709 }
1710
1711 if (scan.devices == 0)
1712 return -ENODEV;
1713
1714 /*
1715 * Console must be initiated after the generic initialization.
1716 */
1717 sunsu_serial_init();
1718
1719 return 0;
1720 }
1721
1722 static void __exit sunsu_exit(void)
1723 {
1724 int i, saw_uart;
1725
1726 saw_uart = 0;
1727 for (i = 0; i < UART_NR; i++) {
1728 struct uart_sunsu_port *up = &sunsu_ports[i];
1729
1730 if (up->su_type == SU_PORT_MS ||
1731 up->su_type == SU_PORT_KBD) {
1732 #ifdef CONFIG_SERIO
1733 if (up->serio) {
1734 serio_unregister_port(up->serio);
1735 up->serio = NULL;
1736 }
1737 #endif
1738 } else if (up->port.type != PORT_UNKNOWN) {
1739 uart_remove_one_port(&sunsu_reg, &up->port);
1740 saw_uart++;
1741 }
1742 }
1743
1744 if (saw_uart)
1745 uart_unregister_driver(&sunsu_reg);
1746 }
1747
1748 module_init(sunsu_probe);
1749 module_exit(sunsu_exit);
Verdex Pro support