[TG3]: Set minimal hw interrupt mitigation.
[linux-2.6/verdex.git] / sound / pci / cs46xx / dsp_spos.h
blob90871bf9762f51cdc4078b2ae9583657a7cc3865
1 /*
2 * The driver for the Cirrus Logic's Sound Fusion CS46XX based soundcards
3 * Copyright (c) by Jaroslav Kysela <perex@suse.cz>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 * 2002-07 Benny Sjostrand benny@hostmobility.com
26 #ifdef CONFIG_SND_CS46XX_NEW_DSP /* hack ... */
27 #ifndef __DSP_SPOS_H__
28 #define __DSP_SPOS_H__
30 #define DSP_MAX_SYMBOLS 1024
31 #define DSP_MAX_MODULES 64
33 #define DSP_CODE_BYTE_SIZE 0x00007000UL
34 #define DSP_PARAMETER_BYTE_SIZE 0x00003000UL
35 #define DSP_SAMPLE_BYTE_SIZE 0x00003800UL
36 #define DSP_PARAMETER_BYTE_OFFSET 0x00000000UL
37 #define DSP_SAMPLE_BYTE_OFFSET 0x00010000UL
38 #define DSP_CODE_BYTE_OFFSET 0x00020000UL
40 #define WIDE_INSTR_MASK 0x0040
41 #define WIDE_LADD_INSTR_MASK 0x0380
43 /* this instruction types
44 needs to be reallocated when load
45 code into DSP */
46 typedef enum {
47 WIDE_FOR_BEGIN_LOOP = 0x20,
48 WIDE_FOR_BEGIN_LOOP2,
50 WIDE_COND_GOTO_ADDR = 0x30,
51 WIDE_COND_GOTO_CALL,
53 WIDE_TBEQ_COND_GOTO_ADDR = 0x70,
54 WIDE_TBEQ_COND_CALL_ADDR,
55 WIDE_TBEQ_NCOND_GOTO_ADDR,
56 WIDE_TBEQ_NCOND_CALL_ADDR,
57 WIDE_TBEQ_COND_GOTO1_ADDR,
58 WIDE_TBEQ_COND_CALL1_ADDR,
59 WIDE_TBEQ_NCOND_GOTOI_ADDR,
60 WIDE_TBEQ_NCOND_CALL1_ADDR,
61 } wide_opcode_t;
63 /* SAMPLE segment */
64 #define VARI_DECIMATE_BUF1 0x0000
65 #define WRITE_BACK_BUF1 0x0400
66 #define CODEC_INPUT_BUF1 0x0500
67 #define PCM_READER_BUF1 0x0600
68 #define SRC_DELAY_BUF1 0x0680
69 #define VARI_DECIMATE_BUF0 0x0780
70 #define SRC_OUTPUT_BUF1 0x07A0
71 #define ASYNC_IP_OUTPUT_BUFFER1 0x0A00
72 #define OUTPUT_SNOOP_BUFFER 0x0B00
73 #define SPDIFI_IP_OUTPUT_BUFFER1 0x0E00
74 #define SPDIFO_IP_OUTPUT_BUFFER1 0x1000
75 #define MIX_SAMPLE_BUF1 0x1400
76 #define MIX_SAMPLE_BUF2 0x2E80
77 #define MIX_SAMPLE_BUF3 0x2F00
78 #define MIX_SAMPLE_BUF4 0x2F80
79 #define MIX_SAMPLE_BUF5 0x3000
81 /* Task stack address */
82 #define HFG_STACK 0x066A
83 #define FG_STACK 0x066E
84 #define BG_STACK 0x068E
86 /* SCB's addresses */
87 #define SPOSCB_ADDR 0x070
88 #define BG_TREE_SCB_ADDR 0x635
89 #define NULL_SCB_ADDR 0x000
90 #define TIMINGMASTER_SCB_ADDR 0x010
91 #define CODECOUT_SCB_ADDR 0x020
92 #define PCMREADER_SCB_ADDR 0x030
93 #define WRITEBACK_SCB_ADDR 0x040
94 #define CODECIN_SCB_ADDR 0x080
95 #define MASTERMIX_SCB_ADDR 0x090
96 #define SRCTASK_SCB_ADDR 0x0A0
97 #define VARIDECIMATE_SCB_ADDR 0x0B0
98 #define PCMSERIALIN_SCB_ADDR 0x0C0
99 #define FG_TASK_HEADER_ADDR 0x600
100 #define ASYNCTX_SCB_ADDR 0x0E0
101 #define ASYNCRX_SCB_ADDR 0x0F0
102 #define SRCTASKII_SCB_ADDR 0x100
103 #define OUTPUTSNOOP_SCB_ADDR 0x110
104 #define PCMSERIALINII_SCB_ADDR 0x120
105 #define SPIOWRITE_SCB_ADDR 0x130
106 #define REAR_CODECOUT_SCB_ADDR 0x140
107 #define OUTPUTSNOOPII_SCB_ADDR 0x150
108 #define PCMSERIALIN_PCM_SCB_ADDR 0x160
109 #define RECORD_MIXER_SCB_ADDR 0x170
110 #define REAR_MIXER_SCB_ADDR 0x180
111 #define CLFE_MIXER_SCB_ADDR 0x190
112 #define CLFE_CODEC_SCB_ADDR 0x1A0
114 /* hyperforground SCB's*/
115 #define HFG_TREE_SCB 0xBA0
116 #define SPDIFI_SCB_INST 0xBB0
117 #define SPDIFO_SCB_INST 0xBC0
118 #define WRITE_BACK_SPB 0x0D0
120 /* offsets */
121 #define AsyncCIOFIFOPointer 0xd
122 #define SPDIFOFIFOPointer 0xd
123 #define SPDIFIFIFOPointer 0xd
124 #define TCBData 0xb
125 #define HFGFlags 0xa
126 #define TCBContextBlk 0x10
127 #define AFGTxAccumPhi 0x4
128 #define SCBsubListPtr 0x9
129 #define SCBfuncEntryPtr 0xA
130 #define SRCCorPerGof 0x2
131 #define SRCPhiIncr6Int26Frac 0xd
132 #define SCBVolumeCtrl 0xe
134 /* conf */
135 #define UseASER1Input 1
140 * The following defines are for the flags in the rsConfig01/23 registers of
141 * the SP.
144 #define RSCONFIG_MODULO_SIZE_MASK 0x0000000FL
145 #define RSCONFIG_MODULO_16 0x00000001L
146 #define RSCONFIG_MODULO_32 0x00000002L
147 #define RSCONFIG_MODULO_64 0x00000003L
148 #define RSCONFIG_MODULO_128 0x00000004L
149 #define RSCONFIG_MODULO_256 0x00000005L
150 #define RSCONFIG_MODULO_512 0x00000006L
151 #define RSCONFIG_MODULO_1024 0x00000007L
152 #define RSCONFIG_MODULO_4 0x00000008L
153 #define RSCONFIG_MODULO_8 0x00000009L
154 #define RSCONFIG_SAMPLE_SIZE_MASK 0x000000C0L
155 #define RSCONFIG_SAMPLE_8MONO 0x00000000L
156 #define RSCONFIG_SAMPLE_8STEREO 0x00000040L
157 #define RSCONFIG_SAMPLE_16MONO 0x00000080L
158 #define RSCONFIG_SAMPLE_16STEREO 0x000000C0L
159 #define RSCONFIG_UNDERRUN_ZERO 0x00004000L
160 #define RSCONFIG_DMA_TO_HOST 0x00008000L
161 #define RSCONFIG_STREAM_NUM_MASK 0x00FF0000L
162 #define RSCONFIG_MAX_DMA_SIZE_MASK 0x1F000000L
163 #define RSCONFIG_DMA_ENABLE 0x20000000L
164 #define RSCONFIG_PRIORITY_MASK 0xC0000000L
165 #define RSCONFIG_PRIORITY_HIGH 0x00000000L
166 #define RSCONFIG_PRIORITY_MEDIUM_HIGH 0x40000000L
167 #define RSCONFIG_PRIORITY_MEDIUM_LOW 0x80000000L
168 #define RSCONFIG_PRIORITY_LOW 0xC0000000L
169 #define RSCONFIG_STREAM_NUM_SHIFT 16L
170 #define RSCONFIG_MAX_DMA_SIZE_SHIFT 24L
172 /* SP constants */
173 #define FG_INTERVAL_TIMER_PERIOD 0x0051
174 #define BG_INTERVAL_TIMER_PERIOD 0x0100
177 /* Only SP accessible registers */
178 #define SP_ASER_COUNTDOWN 0x8040
179 #define SP_SPDOUT_FIFO 0x0108
180 #define SP_SPDIN_MI_FIFO 0x01E0
181 #define SP_SPDIN_D_FIFO 0x01F0
182 #define SP_SPDIN_STATUS 0x8048
183 #define SP_SPDIN_CONTROL 0x8049
184 #define SP_SPDIN_FIFOPTR 0x804A
185 #define SP_SPDOUT_STATUS 0x804C
186 #define SP_SPDOUT_CONTROL 0x804D
187 #define SP_SPDOUT_CSUV 0x808E
189 static inline u8 _wrap_all_bits (u8 val) {
190 u8 wrapped;
192 /* wrap all 8 bits */
193 wrapped =
194 ((val & 0x1 ) << 7) |
195 ((val & 0x2 ) << 5) |
196 ((val & 0x4 ) << 3) |
197 ((val & 0x8 ) << 1) |
198 ((val & 0x10) >> 1) |
199 ((val & 0x20) >> 3) |
200 ((val & 0x40) >> 5) |
201 ((val & 0x80) >> 7);
203 return wrapped;
208 static inline void cs46xx_dsp_spos_update_scb (cs46xx_t * chip,dsp_scb_descriptor_t * scb)
210 /* update nextSCB and subListPtr in SCB */
211 snd_cs46xx_poke(chip,
212 (scb->address + SCBsubListPtr) << 2,
213 (scb->sub_list_ptr->address << 0x10) |
214 (scb->next_scb_ptr->address));
217 static inline void cs46xx_dsp_scb_set_volume (cs46xx_t * chip,dsp_scb_descriptor_t * scb,
218 u16 left,u16 right) {
219 unsigned int val = ((0xffff - left) << 16 | (0xffff - right));
221 snd_cs46xx_poke(chip, (scb->address + SCBVolumeCtrl) << 2, val);
222 snd_cs46xx_poke(chip, (scb->address + SCBVolumeCtrl + 1) << 2, val);
224 #endif /* __DSP_SPOS_H__ */
225 #endif /* CONFIG_SND_CS46XX_NEW_DSP */