?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[PATCH] W1: w1_netlink: New init/fini netlink callbacks.
[linux-2.6/verdex.git] / drivers / hwmon / lm85.c
blobab214df9624bc423376bef632b4a87d0d1f2cf96
1 /*
2 lm85.c - Part of lm_sensors, Linux kernel modules for hardware
3 monitoring
4 Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
5 Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com>
6 Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de>
7 Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com>
8
9 Chip details at <http://www.national.com/ds/LM/LM85.pdf>
10
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 2 of the License, or
14 (at your option) any later version.
15
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
20
21 You should have received a copy of the GNU General Public License
22 along with this program; if not, write to the Free Software
23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 */
25
26 #include <linux/module.h>
27 #include <linux/init.h>
28 #include <linux/slab.h>
29 #include <linux/jiffies.h>
30 #include <linux/i2c.h>
31 #include <linux/hwmon.h>
32 #include <linux/hwmon-vid.h>
33 #include <linux/err.h>
34
35 /* Addresses to scan */
36 static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
37
38 /* Insmod parameters */
39 I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
40
41 /* The LM85 registers */
42
43 #define LM85_REG_IN(nr) (0x20 + (nr))
44 #define LM85_REG_IN_MIN(nr) (0x44 + (nr) * 2)
45 #define LM85_REG_IN_MAX(nr) (0x45 + (nr) * 2)
46
47 #define LM85_REG_TEMP(nr) (0x25 + (nr))
48 #define LM85_REG_TEMP_MIN(nr) (0x4e + (nr) * 2)
49 #define LM85_REG_TEMP_MAX(nr) (0x4f + (nr) * 2)
50
51 /* Fan speeds are LSB, MSB (2 bytes) */
52 #define LM85_REG_FAN(nr) (0x28 + (nr) *2)
53 #define LM85_REG_FAN_MIN(nr) (0x54 + (nr) *2)
54
55 #define LM85_REG_PWM(nr) (0x30 + (nr))
56
57 #define ADT7463_REG_OPPOINT(nr) (0x33 + (nr))
58
59 #define ADT7463_REG_TMIN_CTL1 0x36
60 #define ADT7463_REG_TMIN_CTL2 0x37
61
62 #define LM85_REG_DEVICE 0x3d
63 #define LM85_REG_COMPANY 0x3e
64 #define LM85_REG_VERSTEP 0x3f
65 /* These are the recognized values for the above regs */
66 #define LM85_DEVICE_ADX 0x27
67 #define LM85_COMPANY_NATIONAL 0x01
68 #define LM85_COMPANY_ANALOG_DEV 0x41
69 #define LM85_COMPANY_SMSC 0x5c
70 #define LM85_VERSTEP_VMASK 0xf0
71 #define LM85_VERSTEP_GENERIC 0x60
72 #define LM85_VERSTEP_LM85C 0x60
73 #define LM85_VERSTEP_LM85B 0x62
74 #define LM85_VERSTEP_ADM1027 0x60
75 #define LM85_VERSTEP_ADT7463 0x62
76 #define LM85_VERSTEP_ADT7463C 0x6A
77 #define LM85_VERSTEP_EMC6D100_A0 0x60
78 #define LM85_VERSTEP_EMC6D100_A1 0x61
79 #define LM85_VERSTEP_EMC6D102 0x65
80
81 #define LM85_REG_CONFIG 0x40
82
83 #define LM85_REG_ALARM1 0x41
84 #define LM85_REG_ALARM2 0x42
85
86 #define LM85_REG_VID 0x43
87
88 /* Automated FAN control */
89 #define LM85_REG_AFAN_CONFIG(nr) (0x5c + (nr))
90 #define LM85_REG_AFAN_RANGE(nr) (0x5f + (nr))
91 #define LM85_REG_AFAN_SPIKE1 0x62
92 #define LM85_REG_AFAN_SPIKE2 0x63
93 #define LM85_REG_AFAN_MINPWM(nr) (0x64 + (nr))
94 #define LM85_REG_AFAN_LIMIT(nr) (0x67 + (nr))
95 #define LM85_REG_AFAN_CRITICAL(nr) (0x6a + (nr))
96 #define LM85_REG_AFAN_HYST1 0x6d
97 #define LM85_REG_AFAN_HYST2 0x6e
98
99 #define LM85_REG_TACH_MODE 0x74
100 #define LM85_REG_SPINUP_CTL 0x75
101
102 #define ADM1027_REG_TEMP_OFFSET(nr) (0x70 + (nr))
103 #define ADM1027_REG_CONFIG2 0x73
104 #define ADM1027_REG_INTMASK1 0x74
105 #define ADM1027_REG_INTMASK2 0x75
106 #define ADM1027_REG_EXTEND_ADC1 0x76
107 #define ADM1027_REG_EXTEND_ADC2 0x77
108 #define ADM1027_REG_CONFIG3 0x78
109 #define ADM1027_REG_FAN_PPR 0x7b
110
111 #define ADT7463_REG_THERM 0x79
112 #define ADT7463_REG_THERM_LIMIT 0x7A
113
114 #define EMC6D100_REG_ALARM3 0x7d
115 /* IN5, IN6 and IN7 */
116 #define EMC6D100_REG_IN(nr) (0x70 + ((nr)-5))
117 #define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2)
118 #define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2)
119 #define EMC6D102_REG_EXTEND_ADC1 0x85
120 #define EMC6D102_REG_EXTEND_ADC2 0x86
121 #define EMC6D102_REG_EXTEND_ADC3 0x87
122 #define EMC6D102_REG_EXTEND_ADC4 0x88
123
124 #define LM85_ALARM_IN0 0x0001
125 #define LM85_ALARM_IN1 0x0002
126 #define LM85_ALARM_IN2 0x0004
127 #define LM85_ALARM_IN3 0x0008
128 #define LM85_ALARM_TEMP1 0x0010
129 #define LM85_ALARM_TEMP2 0x0020
130 #define LM85_ALARM_TEMP3 0x0040
131 #define LM85_ALARM_ALARM2 0x0080
132 #define LM85_ALARM_IN4 0x0100
133 #define LM85_ALARM_RESERVED 0x0200
134 #define LM85_ALARM_FAN1 0x0400
135 #define LM85_ALARM_FAN2 0x0800
136 #define LM85_ALARM_FAN3 0x1000
137 #define LM85_ALARM_FAN4 0x2000
138 #define LM85_ALARM_TEMP1_FAULT 0x4000
139 #define LM85_ALARM_TEMP3_FAULT 0x8000
140
141
142 /* Conversions. Rounding and limit checking is only done on the TO_REG
143 variants. Note that you should be a bit careful with which arguments
144 these macros are called: arguments may be evaluated more than once.
145 */
146
147 /* IN are scaled acording to built-in resistors */
148 static int lm85_scaling[] = { /* .001 Volts */
149 2500, 2250, 3300, 5000, 12000,
150 3300, 1500, 1800 /*EMC6D100*/
151 };
152 #define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from))
153
154 #define INS_TO_REG(n,val) \
155 SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255)
156
157 #define INSEXT_FROM_REG(n,val,ext,scale) \
158 SCALE((val)*(scale) + (ext),192*(scale),lm85_scaling[n])
159
160 #define INS_FROM_REG(n,val) INSEXT_FROM_REG(n,val,0,1)
161
162 /* FAN speed is measured using 90kHz clock */
163 #define FAN_TO_REG(val) (SENSORS_LIMIT( (val)<=0?0: 5400000/(val),0,65534))
164 #define FAN_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:5400000/(val))
165
166 /* Temperature is reported in .001 degC increments */
167 #define TEMP_TO_REG(val) \
168 SENSORS_LIMIT(SCALE(val,1000,1),-127,127)
169 #define TEMPEXT_FROM_REG(val,ext,scale) \
170 SCALE((val)*scale + (ext),scale,1000)
171 #define TEMP_FROM_REG(val) \
172 TEMPEXT_FROM_REG(val,0,1)
173
174 #define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255))
175 #define PWM_FROM_REG(val) (val)
176
177
178 /* ZONEs have the following parameters:
179 * Limit (low) temp, 1. degC
180 * Hysteresis (below limit), 1. degC (0-15)
181 * Range of speed control, .1 degC (2-80)
182 * Critical (high) temp, 1. degC
183 *
184 * FAN PWMs have the following parameters:
185 * Reference Zone, 1, 2, 3, etc.
186 * Spinup time, .05 sec
187 * PWM value at limit/low temp, 1 count
188 * PWM Frequency, 1. Hz
189 * PWM is Min or OFF below limit, flag
190 * Invert PWM output, flag
191 *
192 * Some chips filter the temp, others the fan.
193 * Filter constant (or disabled) .1 seconds
194 */
195
196 /* These are the zone temperature range encodings in .001 degree C */
197 static int lm85_range_map[] = {
198 2000, 2500, 3300, 4000, 5000, 6600,
199 8000, 10000, 13300, 16000, 20000, 26600,
200 32000, 40000, 53300, 80000
201 };
202 static int RANGE_TO_REG( int range )
203 {
204 int i;
205
206 if ( range < lm85_range_map[0] ) {
207 return 0 ;
208 } else if ( range > lm85_range_map[15] ) {
209 return 15 ;
210 } else { /* find closest match */
211 for ( i = 14 ; i >= 0 ; --i ) {
212 if ( range > lm85_range_map[i] ) { /* range bracketed */
213 if ((lm85_range_map[i+1] - range) <
214 (range - lm85_range_map[i])) {
215 i++;
216 break;
217 }
218 break;
219 }
220 }
221 }
222 return( i & 0x0f );
223 }
224 #define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])
225
226 /* These are the Acoustic Enhancement, or Temperature smoothing encodings
227 * NOTE: The enable/disable bit is INCLUDED in these encodings as the
228 * MSB (bit 3, value 8). If the enable bit is 0, the encoded value
229 * is ignored, or set to 0.
230 */
231 /* These are the PWM frequency encodings */
232 static int lm85_freq_map[] = { /* .1 Hz */
233 100, 150, 230, 300, 380, 470, 620, 940
234 };
235 static int FREQ_TO_REG( int freq )
236 {
237 int i;
238
239 if( freq >= lm85_freq_map[7] ) { return 7 ; }
240 for( i = 0 ; i < 7 ; ++i )
241 if( freq <= lm85_freq_map[i] )
242 break ;
243 return( i & 0x07 );
244 }
245 #define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07])
246
247 /* Since we can't use strings, I'm abusing these numbers
248 * to stand in for the following meanings:
249 * 1 -- PWM responds to Zone 1
250 * 2 -- PWM responds to Zone 2
251 * 3 -- PWM responds to Zone 3
252 * 23 -- PWM responds to the higher temp of Zone 2 or 3
253 * 123 -- PWM responds to highest of Zone 1, 2, or 3
254 * 0 -- PWM is always at 0% (ie, off)
255 * -1 -- PWM is always at 100%
256 * -2 -- PWM responds to manual control
257 */
258
259 static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
260 #define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07])
261
262 static int ZONE_TO_REG( int zone )
263 {
264 int i;
265
266 for( i = 0 ; i <= 7 ; ++i )
267 if( zone == lm85_zone_map[i] )
268 break ;
269 if( i > 7 ) /* Not found. */
270 i = 3; /* Always 100% */
271 return( (i & 0x07)<<5 );
272 }
273
274 #define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15))
275 #define HYST_FROM_REG(val) ((val)*1000)
276
277 #define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127))
278 #define OFFSET_FROM_REG(val) ((val)*25)
279
280 #define PPR_MASK(fan) (0x03<<(fan *2))
281 #define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2))
282 #define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1)
283
284 /* Chip sampling rates
285 *
286 * Some sensors are not updated more frequently than once per second
287 * so it doesn't make sense to read them more often than that.
288 * We cache the results and return the saved data if the driver
289 * is called again before a second has elapsed.
290 *
291 * Also, there is significant configuration data for this chip
292 * given the automatic PWM fan control that is possible. There
293 * are about 47 bytes of config data to only 22 bytes of actual
294 * readings. So, we keep the config data up to date in the cache
295 * when it is written and only sample it once every 1 *minute*
296 */
297 #define LM85_DATA_INTERVAL (HZ + HZ / 2)
298 #define LM85_CONFIG_INTERVAL (1 * 60 * HZ)
299
300 /* For each registered LM85, we need to keep some data in memory. That
301 data is pointed to by lm85_list[NR]->data. The structure itself is
302 dynamically allocated, at the same time when a new lm85 client is
303 allocated. */
304
305 /* LM85 can automatically adjust fan speeds based on temperature
306 * This structure encapsulates an entire Zone config. There are
307 * three zones (one for each temperature input) on the lm85
308 */
309 struct lm85_zone {
310 s8 limit; /* Low temp limit */
311 u8 hyst; /* Low limit hysteresis. (0-15) */
312 u8 range; /* Temp range, encoded */
313 s8 critical; /* "All fans ON" temp limit */
314 u8 off_desired; /* Actual "off" temperature specified. Preserved
315 * to prevent "drift" as other autofan control
316 * values change.
317 */
318 u8 max_desired; /* Actual "max" temperature specified. Preserved
319 * to prevent "drift" as other autofan control
320 * values change.
321 */
322 };
323
324 struct lm85_autofan {
325 u8 config; /* Register value */
326 u8 freq; /* PWM frequency, encoded */
327 u8 min_pwm; /* Minimum PWM value, encoded */
328 u8 min_off; /* Min PWM or OFF below "limit", flag */
329 };
330
331 struct lm85_data {
332 struct i2c_client client;
333 struct class_device *class_dev;
334 struct semaphore lock;
335 enum chips type;
336
337 struct semaphore update_lock;
338 int valid; /* !=0 if following fields are valid */
339 unsigned long last_reading; /* In jiffies */
340 unsigned long last_config; /* In jiffies */
341
342 u8 in[8]; /* Register value */
343 u8 in_max[8]; /* Register value */
344 u8 in_min[8]; /* Register value */
345 s8 temp[3]; /* Register value */
346 s8 temp_min[3]; /* Register value */
347 s8 temp_max[3]; /* Register value */
348 s8 temp_offset[3]; /* Register value */
349 u16 fan[4]; /* Register value */
350 u16 fan_min[4]; /* Register value */
351 u8 pwm[3]; /* Register value */
352 u8 spinup_ctl; /* Register encoding, combined */
353 u8 tach_mode; /* Register encoding, combined */
354 u8 temp_ext[3]; /* Decoded values */
355 u8 in_ext[8]; /* Decoded values */
356 u8 adc_scale; /* ADC Extended bits scaling factor */
357 u8 fan_ppr; /* Register value */
358 u8 smooth[3]; /* Register encoding */
359 u8 vid; /* Register value */
360 u8 vrm; /* VRM version */
361 u8 syncpwm3; /* Saved PWM3 for TACH 2,3,4 config */
362 u8 oppoint[3]; /* Register value */
363 u16 tmin_ctl; /* Register value */
364 unsigned long therm_total; /* Cummulative therm count */
365 u8 therm_limit; /* Register value */
366 u32 alarms; /* Register encoding, combined */
367 struct lm85_autofan autofan[3];
368 struct lm85_zone zone[3];
369 };
370
371 static int lm85_attach_adapter(struct i2c_adapter *adapter);
372 static int lm85_detect(struct i2c_adapter *adapter, int address,
373 int kind);
374 static int lm85_detach_client(struct i2c_client *client);
375
376 static int lm85_read_value(struct i2c_client *client, u8 register);
377 static int lm85_write_value(struct i2c_client *client, u8 register, int value);
378 static struct lm85_data *lm85_update_device(struct device *dev);
379 static void lm85_init_client(struct i2c_client *client);
380
381
382 static struct i2c_driver lm85_driver = {
383 .owner = THIS_MODULE,
384 .name = "lm85",
385 .id = I2C_DRIVERID_LM85,
386 .flags = I2C_DF_NOTIFY,
387 .attach_adapter = lm85_attach_adapter,
388 .detach_client = lm85_detach_client,
389 };
390
391
392 /* 4 Fans */
393 static ssize_t show_fan(struct device *dev, char *buf, int nr)
394 {
395 struct lm85_data *data = lm85_update_device(dev);
396 return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) );
397 }
398 static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
399 {
400 struct lm85_data *data = lm85_update_device(dev);
401 return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) );
402 }
403 static ssize_t set_fan_min(struct device *dev, const char *buf,
404 size_t count, int nr)
405 {
406 struct i2c_client *client = to_i2c_client(dev);
407 struct lm85_data *data = i2c_get_clientdata(client);
408 long val = simple_strtol(buf, NULL, 10);
409
410 down(&data->update_lock);
411 data->fan_min[nr] = FAN_TO_REG(val);
412 lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]);
413 up(&data->update_lock);
414 return count;
415 }
416
417 #define show_fan_offset(offset) \
418 static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
419 { \
420 return show_fan(dev, buf, offset - 1); \
421 } \
422 static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
423 { \
424 return show_fan_min(dev, buf, offset - 1); \
425 } \
426 static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \
427 const char *buf, size_t count) \
428 { \
429 return set_fan_min(dev, buf, count, offset - 1); \
430 } \
431 static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, \
432 NULL); \
433 static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
434 show_fan_##offset##_min, set_fan_##offset##_min);
435
436 show_fan_offset(1);
437 show_fan_offset(2);
438 show_fan_offset(3);
439 show_fan_offset(4);
440
441 /* vid, vrm, alarms */
442
443 static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
444 {
445 struct lm85_data *data = lm85_update_device(dev);
446 return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
447 }
448
449 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
450
451 static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
452 {
453 struct lm85_data *data = lm85_update_device(dev);
454 return sprintf(buf, "%ld\n", (long) data->vrm);
455 }
456
457 static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
458 {
459 struct i2c_client *client = to_i2c_client(dev);
460 struct lm85_data *data = i2c_get_clientdata(client);
461 u32 val;
462
463 val = simple_strtoul(buf, NULL, 10);
464 data->vrm = val;
465 return count;
466 }
467
468 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
469
470 static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
471 {
472 struct lm85_data *data = lm85_update_device(dev);
473 return sprintf(buf, "%u\n", data->alarms);
474 }
475
476 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
477
478 /* pwm */
479
480 static ssize_t show_pwm(struct device *dev, char *buf, int nr)
481 {
482 struct lm85_data *data = lm85_update_device(dev);
483 return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) );
484 }
485 static ssize_t set_pwm(struct device *dev, const char *buf,
486 size_t count, int nr)
487 {
488 struct i2c_client *client = to_i2c_client(dev);
489 struct lm85_data *data = i2c_get_clientdata(client);
490 long val = simple_strtol(buf, NULL, 10);
491
492 down(&data->update_lock);
493 data->pwm[nr] = PWM_TO_REG(val);
494 lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]);
495 up(&data->update_lock);
496 return count;
497 }
498 static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr)
499 {
500 struct lm85_data *data = lm85_update_device(dev);
501 int pwm_zone;
502
503 pwm_zone = ZONE_FROM_REG(data->autofan[nr].config);
504 return sprintf(buf,"%d\n", (pwm_zone != 0 && pwm_zone != -1) );
505 }
506
507 #define show_pwm_reg(offset) \
508 static ssize_t show_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
509 { \
510 return show_pwm(dev, buf, offset - 1); \
511 } \
512 static ssize_t set_pwm_##offset (struct device *dev, struct device_attribute *attr, \
513 const char *buf, size_t count) \
514 { \
515 return set_pwm(dev, buf, count, offset - 1); \
516 } \
517 static ssize_t show_pwm_enable##offset (struct device *dev, struct device_attribute *attr, char *buf) \
518 { \
519 return show_pwm_enable(dev, buf, offset - 1); \
520 } \
521 static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
522 show_pwm_##offset, set_pwm_##offset); \
523 static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO, \
524 show_pwm_enable##offset, NULL);
525
526 show_pwm_reg(1);
527 show_pwm_reg(2);
528 show_pwm_reg(3);
529
530 /* Voltages */
531
532 static ssize_t show_in(struct device *dev, char *buf, int nr)
533 {
534 struct lm85_data *data = lm85_update_device(dev);
535 return sprintf( buf, "%d\n", INSEXT_FROM_REG(nr,
536 data->in[nr],
537 data->in_ext[nr],
538 data->adc_scale) );
539 }
540 static ssize_t show_in_min(struct device *dev, char *buf, int nr)
541 {
542 struct lm85_data *data = lm85_update_device(dev);
543 return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) );
544 }
545 static ssize_t set_in_min(struct device *dev, const char *buf,
546 size_t count, int nr)
547 {
548 struct i2c_client *client = to_i2c_client(dev);
549 struct lm85_data *data = i2c_get_clientdata(client);
550 long val = simple_strtol(buf, NULL, 10);
551
552 down(&data->update_lock);
553 data->in_min[nr] = INS_TO_REG(nr, val);
554 lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]);
555 up(&data->update_lock);
556 return count;
557 }
558 static ssize_t show_in_max(struct device *dev, char *buf, int nr)
559 {
560 struct lm85_data *data = lm85_update_device(dev);
561 return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) );
562 }
563 static ssize_t set_in_max(struct device *dev, const char *buf,
564 size_t count, int nr)
565 {
566 struct i2c_client *client = to_i2c_client(dev);
567 struct lm85_data *data = i2c_get_clientdata(client);
568 long val = simple_strtol(buf, NULL, 10);
569
570 down(&data->update_lock);
571 data->in_max[nr] = INS_TO_REG(nr, val);
572 lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]);
573 up(&data->update_lock);
574 return count;
575 }
576 #define show_in_reg(offset) \
577 static ssize_t show_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
578 { \
579 return show_in(dev, buf, offset); \
580 } \
581 static ssize_t show_in_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
582 { \
583 return show_in_min(dev, buf, offset); \
584 } \
585 static ssize_t show_in_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
586 { \
587 return show_in_max(dev, buf, offset); \
588 } \
589 static ssize_t set_in_##offset##_min (struct device *dev, struct device_attribute *attr, \
590 const char *buf, size_t count) \
591 { \
592 return set_in_min(dev, buf, count, offset); \
593 } \
594 static ssize_t set_in_##offset##_max (struct device *dev, struct device_attribute *attr, \
595 const char *buf, size_t count) \
596 { \
597 return set_in_max(dev, buf, count, offset); \
598 } \
599 static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in_##offset, \
600 NULL); \
601 static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
602 show_in_##offset##_min, set_in_##offset##_min); \
603 static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
604 show_in_##offset##_max, set_in_##offset##_max);
605
606 show_in_reg(0);
607 show_in_reg(1);
608 show_in_reg(2);
609 show_in_reg(3);
610 show_in_reg(4);
611
612 /* Temps */
613
614 static ssize_t show_temp(struct device *dev, char *buf, int nr)
615 {
616 struct lm85_data *data = lm85_update_device(dev);
617 return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr],
618 data->temp_ext[nr],
619 data->adc_scale) );
620 }
621 static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
622 {
623 struct lm85_data *data = lm85_update_device(dev);
624 return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) );
625 }
626 static ssize_t set_temp_min(struct device *dev, const char *buf,
627 size_t count, int nr)
628 {
629 struct i2c_client *client = to_i2c_client(dev);
630 struct lm85_data *data = i2c_get_clientdata(client);
631 long val = simple_strtol(buf, NULL, 10);
632
633 down(&data->update_lock);
634 data->temp_min[nr] = TEMP_TO_REG(val);
635 lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]);
636 up(&data->update_lock);
637 return count;
638 }
639 static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
640 {
641 struct lm85_data *data = lm85_update_device(dev);
642 return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) );
643 }
644 static ssize_t set_temp_max(struct device *dev, const char *buf,
645 size_t count, int nr)
646 {
647 struct i2c_client *client = to_i2c_client(dev);
648 struct lm85_data *data = i2c_get_clientdata(client);
649 long val = simple_strtol(buf, NULL, 10);
650
651 down(&data->update_lock);
652 data->temp_max[nr] = TEMP_TO_REG(val);
653 lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]);
654 up(&data->update_lock);
655 return count;
656 }
657 #define show_temp_reg(offset) \
658 static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
659 { \
660 return show_temp(dev, buf, offset - 1); \
661 } \
662 static ssize_t show_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
663 { \
664 return show_temp_min(dev, buf, offset - 1); \
665 } \
666 static ssize_t show_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
667 { \
668 return show_temp_max(dev, buf, offset - 1); \
669 } \
670 static ssize_t set_temp_##offset##_min (struct device *dev, struct device_attribute *attr, \
671 const char *buf, size_t count) \
672 { \
673 return set_temp_min(dev, buf, count, offset - 1); \
674 } \
675 static ssize_t set_temp_##offset##_max (struct device *dev, struct device_attribute *attr, \
676 const char *buf, size_t count) \
677 { \
678 return set_temp_max(dev, buf, count, offset - 1); \
679 } \
680 static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, \
681 NULL); \
682 static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
683 show_temp_##offset##_min, set_temp_##offset##_min); \
684 static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
685 show_temp_##offset##_max, set_temp_##offset##_max);
686
687 show_temp_reg(1);
688 show_temp_reg(2);
689 show_temp_reg(3);
690
691
692 /* Automatic PWM control */
693
694 static ssize_t show_pwm_auto_channels(struct device *dev, char *buf, int nr)
695 {
696 struct lm85_data *data = lm85_update_device(dev);
697 return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config));
698 }
699 static ssize_t set_pwm_auto_channels(struct device *dev, const char *buf,
700 size_t count, int nr)
701 {
702 struct i2c_client *client = to_i2c_client(dev);
703 struct lm85_data *data = i2c_get_clientdata(client);
704 long val = simple_strtol(buf, NULL, 10);
705
706 down(&data->update_lock);
707 data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
708 | ZONE_TO_REG(val) ;
709 lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
710 data->autofan[nr].config);
711 up(&data->update_lock);
712 return count;
713 }
714 static ssize_t show_pwm_auto_pwm_min(struct device *dev, char *buf, int nr)
715 {
716 struct lm85_data *data = lm85_update_device(dev);
717 return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
718 }
719 static ssize_t set_pwm_auto_pwm_min(struct device *dev, const char *buf,
720 size_t count, int nr)
721 {
722 struct i2c_client *client = to_i2c_client(dev);
723 struct lm85_data *data = i2c_get_clientdata(client);
724 long val = simple_strtol(buf, NULL, 10);
725
726 down(&data->update_lock);
727 data->autofan[nr].min_pwm = PWM_TO_REG(val);
728 lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr),
729 data->autofan[nr].min_pwm);
730 up(&data->update_lock);
731 return count;
732 }
733 static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, char *buf, int nr)
734 {
735 struct lm85_data *data = lm85_update_device(dev);
736 return sprintf(buf,"%d\n", data->autofan[nr].min_off);
737 }
738 static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, const char *buf,
739 size_t count, int nr)
740 {
741 struct i2c_client *client = to_i2c_client(dev);
742 struct lm85_data *data = i2c_get_clientdata(client);
743 long val = simple_strtol(buf, NULL, 10);
744
745 down(&data->update_lock);
746 data->autofan[nr].min_off = val;
747 lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0]
748 | data->syncpwm3
749 | (data->autofan[0].min_off ? 0x20 : 0)
750 | (data->autofan[1].min_off ? 0x40 : 0)
751 | (data->autofan[2].min_off ? 0x80 : 0)
752 );
753 up(&data->update_lock);
754 return count;
755 }
756 static ssize_t show_pwm_auto_pwm_freq(struct device *dev, char *buf, int nr)
757 {
758 struct lm85_data *data = lm85_update_device(dev);
759 return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
760 }
761 static ssize_t set_pwm_auto_pwm_freq(struct device *dev, const char *buf,
762 size_t count, int nr)
763 {
764 struct i2c_client *client = to_i2c_client(dev);
765 struct lm85_data *data = i2c_get_clientdata(client);
766 long val = simple_strtol(buf, NULL, 10);
767
768 down(&data->update_lock);
769 data->autofan[nr].freq = FREQ_TO_REG(val);
770 lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
771 (data->zone[nr].range << 4)
772 | data->autofan[nr].freq
773 );
774 up(&data->update_lock);
775 return count;
776 }
777 #define pwm_auto(offset) \
778 static ssize_t show_pwm##offset##_auto_channels (struct device *dev, struct device_attribute *attr, \
779 char *buf) \
780 { \
781 return show_pwm_auto_channels(dev, buf, offset - 1); \
782 } \
783 static ssize_t set_pwm##offset##_auto_channels (struct device *dev, struct device_attribute *attr, \
784 const char *buf, size_t count) \
785 { \
786 return set_pwm_auto_channels(dev, buf, count, offset - 1); \
787 } \
788 static ssize_t show_pwm##offset##_auto_pwm_min (struct device *dev, struct device_attribute *attr, \
789 char *buf) \
790 { \
791 return show_pwm_auto_pwm_min(dev, buf, offset - 1); \
792 } \
793 static ssize_t set_pwm##offset##_auto_pwm_min (struct device *dev, struct device_attribute *attr, \
794 const char *buf, size_t count) \
795 { \
796 return set_pwm_auto_pwm_min(dev, buf, count, offset - 1); \
797 } \
798 static ssize_t show_pwm##offset##_auto_pwm_minctl (struct device *dev, struct device_attribute *attr, \
799 char *buf) \
800 { \
801 return show_pwm_auto_pwm_minctl(dev, buf, offset - 1); \
802 } \
803 static ssize_t set_pwm##offset##_auto_pwm_minctl (struct device *dev, struct device_attribute *attr, \
804 const char *buf, size_t count) \
805 { \
806 return set_pwm_auto_pwm_minctl(dev, buf, count, offset - 1); \
807 } \
808 static ssize_t show_pwm##offset##_auto_pwm_freq (struct device *dev, struct device_attribute *attr, \
809 char *buf) \
810 { \
811 return show_pwm_auto_pwm_freq(dev, buf, offset - 1); \
812 } \
813 static ssize_t set_pwm##offset##_auto_pwm_freq(struct device *dev, struct device_attribute *attr, \
814 const char *buf, size_t count) \
815 { \
816 return set_pwm_auto_pwm_freq(dev, buf, count, offset - 1); \
817 } \
818 static DEVICE_ATTR(pwm##offset##_auto_channels, S_IRUGO | S_IWUSR, \
819 show_pwm##offset##_auto_channels, \
820 set_pwm##offset##_auto_channels); \
821 static DEVICE_ATTR(pwm##offset##_auto_pwm_min, S_IRUGO | S_IWUSR, \
822 show_pwm##offset##_auto_pwm_min, \
823 set_pwm##offset##_auto_pwm_min); \
824 static DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, S_IRUGO | S_IWUSR, \
825 show_pwm##offset##_auto_pwm_minctl, \
826 set_pwm##offset##_auto_pwm_minctl); \
827 static DEVICE_ATTR(pwm##offset##_auto_pwm_freq, S_IRUGO | S_IWUSR, \
828 show_pwm##offset##_auto_pwm_freq, \
829 set_pwm##offset##_auto_pwm_freq);
830 pwm_auto(1);
831 pwm_auto(2);
832 pwm_auto(3);
833
834 /* Temperature settings for automatic PWM control */
835
836 static ssize_t show_temp_auto_temp_off(struct device *dev, char *buf, int nr)
837 {
838 struct lm85_data *data = lm85_update_device(dev);
839 return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
840 HYST_FROM_REG(data->zone[nr].hyst));
841 }
842 static ssize_t set_temp_auto_temp_off(struct device *dev, const char *buf,
843 size_t count, int nr)
844 {
845 struct i2c_client *client = to_i2c_client(dev);
846 struct lm85_data *data = i2c_get_clientdata(client);
847 int min;
848 long val = simple_strtol(buf, NULL, 10);
849
850 down(&data->update_lock);
851 min = TEMP_FROM_REG(data->zone[nr].limit);
852 data->zone[nr].off_desired = TEMP_TO_REG(val);
853 data->zone[nr].hyst = HYST_TO_REG(min - val);
854 if ( nr == 0 || nr == 1 ) {
855 lm85_write_value(client, LM85_REG_AFAN_HYST1,
856 (data->zone[0].hyst << 4)
857 | data->zone[1].hyst
858 );
859 } else {
860 lm85_write_value(client, LM85_REG_AFAN_HYST2,
861 (data->zone[2].hyst << 4)
862 );
863 }
864 up(&data->update_lock);
865 return count;
866 }
867 static ssize_t show_temp_auto_temp_min(struct device *dev, char *buf, int nr)
868 {
869 struct lm85_data *data = lm85_update_device(dev);
870 return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) );
871 }
872 static ssize_t set_temp_auto_temp_min(struct device *dev, const char *buf,
873 size_t count, int nr)
874 {
875 struct i2c_client *client = to_i2c_client(dev);
876 struct lm85_data *data = i2c_get_clientdata(client);
877 long val = simple_strtol(buf, NULL, 10);
878
879 down(&data->update_lock);
880 data->zone[nr].limit = TEMP_TO_REG(val);
881 lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr),
882 data->zone[nr].limit);
883
884 /* Update temp_auto_max and temp_auto_range */
885 data->zone[nr].range = RANGE_TO_REG(
886 TEMP_FROM_REG(data->zone[nr].max_desired) -
887 TEMP_FROM_REG(data->zone[nr].limit));
888 lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
889 ((data->zone[nr].range & 0x0f) << 4)
890 | (data->autofan[nr].freq & 0x07));
891
892 /* Update temp_auto_hyst and temp_auto_off */
893 data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG(
894 data->zone[nr].limit) - TEMP_FROM_REG(
895 data->zone[nr].off_desired));
896 if ( nr == 0 || nr == 1 ) {
897 lm85_write_value(client, LM85_REG_AFAN_HYST1,
898 (data->zone[0].hyst << 4)
899 | data->zone[1].hyst
900 );
901 } else {
902 lm85_write_value(client, LM85_REG_AFAN_HYST2,
903 (data->zone[2].hyst << 4)
904 );
905 }
906 up(&data->update_lock);
907 return count;
908 }
909 static ssize_t show_temp_auto_temp_max(struct device *dev, char *buf, int nr)
910 {
911 struct lm85_data *data = lm85_update_device(dev);
912 return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
913 RANGE_FROM_REG(data->zone[nr].range));
914 }
915 static ssize_t set_temp_auto_temp_max(struct device *dev, const char *buf,
916 size_t count, int nr)
917 {
918 struct i2c_client *client = to_i2c_client(dev);
919 struct lm85_data *data = i2c_get_clientdata(client);
920 int min;
921 long val = simple_strtol(buf, NULL, 10);
922
923 down(&data->update_lock);
924 min = TEMP_FROM_REG(data->zone[nr].limit);
925 data->zone[nr].max_desired = TEMP_TO_REG(val);
926 data->zone[nr].range = RANGE_TO_REG(
927 val - min);
928 lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
929 ((data->zone[nr].range & 0x0f) << 4)
930 | (data->autofan[nr].freq & 0x07));
931 up(&data->update_lock);
932 return count;
933 }
934 static ssize_t show_temp_auto_temp_crit(struct device *dev, char *buf, int nr)
935 {
936 struct lm85_data *data = lm85_update_device(dev);
937 return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical));
938 }
939 static ssize_t set_temp_auto_temp_crit(struct device *dev, const char *buf,
940 size_t count, int nr)
941 {
942 struct i2c_client *client = to_i2c_client(dev);
943 struct lm85_data *data = i2c_get_clientdata(client);
944 long val = simple_strtol(buf, NULL, 10);
945
946 down(&data->update_lock);
947 data->zone[nr].critical = TEMP_TO_REG(val);
948 lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr),
949 data->zone[nr].critical);
950 up(&data->update_lock);
951 return count;
952 }
953 #define temp_auto(offset) \
954 static ssize_t show_temp##offset##_auto_temp_off (struct device *dev, struct device_attribute *attr, \
955 char *buf) \
956 { \
957 return show_temp_auto_temp_off(dev, buf, offset - 1); \
958 } \
959 static ssize_t set_temp##offset##_auto_temp_off (struct device *dev, struct device_attribute *attr, \
960 const char *buf, size_t count) \
961 { \
962 return set_temp_auto_temp_off(dev, buf, count, offset - 1); \
963 } \
964 static ssize_t show_temp##offset##_auto_temp_min (struct device *dev, struct device_attribute *attr, \
965 char *buf) \
966 { \
967 return show_temp_auto_temp_min(dev, buf, offset - 1); \
968 } \
969 static ssize_t set_temp##offset##_auto_temp_min (struct device *dev, struct device_attribute *attr, \
970 const char *buf, size_t count) \
971 { \
972 return set_temp_auto_temp_min(dev, buf, count, offset - 1); \
973 } \
974 static ssize_t show_temp##offset##_auto_temp_max (struct device *dev, struct device_attribute *attr, \
975 char *buf) \
976 { \
977 return show_temp_auto_temp_max(dev, buf, offset - 1); \
978 } \
979 static ssize_t set_temp##offset##_auto_temp_max (struct device *dev, struct device_attribute *attr, \
980 const char *buf, size_t count) \
981 { \
982 return set_temp_auto_temp_max(dev, buf, count, offset - 1); \
983 } \
984 static ssize_t show_temp##offset##_auto_temp_crit (struct device *dev, struct device_attribute *attr, \
985 char *buf) \
986 { \
987 return show_temp_auto_temp_crit(dev, buf, offset - 1); \
988 } \
989 static ssize_t set_temp##offset##_auto_temp_crit (struct device *dev, struct device_attribute *attr, \
990 const char *buf, size_t count) \
991 { \
992 return set_temp_auto_temp_crit(dev, buf, count, offset - 1); \
993 } \
994 static DEVICE_ATTR(temp##offset##_auto_temp_off, S_IRUGO | S_IWUSR, \
995 show_temp##offset##_auto_temp_off, \
996 set_temp##offset##_auto_temp_off); \
997 static DEVICE_ATTR(temp##offset##_auto_temp_min, S_IRUGO | S_IWUSR, \
998 show_temp##offset##_auto_temp_min, \
999 set_temp##offset##_auto_temp_min); \
1000 static DEVICE_ATTR(temp##offset##_auto_temp_max, S_IRUGO | S_IWUSR, \
1001 show_temp##offset##_auto_temp_max, \
1002 set_temp##offset##_auto_temp_max); \
1003 static DEVICE_ATTR(temp##offset##_auto_temp_crit, S_IRUGO | S_IWUSR, \
1004 show_temp##offset##_auto_temp_crit, \
1005 set_temp##offset##_auto_temp_crit);
1006 temp_auto(1);
1007 temp_auto(2);
1008 temp_auto(3);
1009
1010 int lm85_attach_adapter(struct i2c_adapter *adapter)
1011 {
1012 if (!(adapter->class & I2C_CLASS_HWMON))
1013 return 0;
1014 return i2c_probe(adapter, &addr_data, lm85_detect);
1015 }
1016
1017 int lm85_detect(struct i2c_adapter *adapter, int address,
1018 int kind)
1019 {
1020 int company, verstep ;
1021 struct i2c_client *new_client = NULL;
1022 struct lm85_data *data;
1023 int err = 0;
1024 const char *type_name = "";
1025
1026 if (!i2c_check_functionality(adapter,
1027 I2C_FUNC_SMBUS_BYTE_DATA)) {
1028 /* We need to be able to do byte I/O */
1029 goto ERROR0 ;
1030 };
1031
1032 /* OK. For now, we presume we have a valid client. We now create the
1033 client structure, even though we cannot fill it completely yet.
1034 But it allows us to access lm85_{read,write}_value. */
1035
1036 if (!(data = kmalloc(sizeof(struct lm85_data), GFP_KERNEL))) {
1037 err = -ENOMEM;
1038 goto ERROR0;
1039 }
1040 memset(data, 0, sizeof(struct lm85_data));
1041
1042 new_client = &data->client;
1043 i2c_set_clientdata(new_client, data);
1044 new_client->addr = address;
1045 new_client->adapter = adapter;
1046 new_client->driver = &lm85_driver;
1047 new_client->flags = 0;
1048
1049 /* Now, we do the remaining detection. */
1050
1051 company = lm85_read_value(new_client, LM85_REG_COMPANY);
1052 verstep = lm85_read_value(new_client, LM85_REG_VERSTEP);
1053
1054 dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with"
1055 " COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
1056 i2c_adapter_id(new_client->adapter), new_client->addr,
1057 company, verstep);
1058
1059 /* If auto-detecting, Determine the chip type. */
1060 if (kind <= 0) {
1061 dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n",
1062 i2c_adapter_id(adapter), address );
1063 if( company == LM85_COMPANY_NATIONAL
1064 && verstep == LM85_VERSTEP_LM85C ) {
1065 kind = lm85c ;
1066 } else if( company == LM85_COMPANY_NATIONAL
1067 && verstep == LM85_VERSTEP_LM85B ) {
1068 kind = lm85b ;
1069 } else if( company == LM85_COMPANY_NATIONAL
1070 && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
1071 dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
1072 " Defaulting to LM85.\n", verstep);
1073 kind = any_chip ;
1074 } else if( company == LM85_COMPANY_ANALOG_DEV
1075 && verstep == LM85_VERSTEP_ADM1027 ) {
1076 kind = adm1027 ;
1077 } else if( company == LM85_COMPANY_ANALOG_DEV
1078 && (verstep == LM85_VERSTEP_ADT7463
1079 || verstep == LM85_VERSTEP_ADT7463C) ) {
1080 kind = adt7463 ;
1081 } else if( company == LM85_COMPANY_ANALOG_DEV
1082 && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
1083 dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
1084 " Defaulting to Generic LM85.\n", verstep );
1085 kind = any_chip ;
1086 } else if( company == LM85_COMPANY_SMSC
1087 && (verstep == LM85_VERSTEP_EMC6D100_A0
1088 || verstep == LM85_VERSTEP_EMC6D100_A1) ) {
1089 /* Unfortunately, we can't tell a '100 from a '101
1090 * from the registers. Since a '101 is a '100
1091 * in a package with fewer pins and therefore no
1092 * 3.3V, 1.5V or 1.8V inputs, perhaps if those
1093 * inputs read 0, then it's a '101.
1094 */
1095 kind = emc6d100 ;
1096 } else if( company == LM85_COMPANY_SMSC
1097 && verstep == LM85_VERSTEP_EMC6D102) {
1098 kind = emc6d102 ;
1099 } else if( company == LM85_COMPANY_SMSC
1100 && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
1101 dev_err(&adapter->dev, "lm85: Detected SMSC chip\n");
1102 dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x"
1103 " Defaulting to Generic LM85.\n", verstep );
1104 kind = any_chip ;
1105 } else if( kind == any_chip
1106 && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
1107 dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n");
1108 /* Leave kind as "any_chip" */
1109 } else {
1110 dev_dbg(&adapter->dev, "Autodetection failed\n");
1111 /* Not an LM85 ... */
1112 if( kind == any_chip ) { /* User used force=x,y */
1113 dev_err(&adapter->dev, "Generic LM85 Version 6 not"
1114 " found at %d,0x%02x. Try force_lm85c.\n",
1115 i2c_adapter_id(adapter), address );
1116 }
1117 err = 0 ;
1118 goto ERROR1;
1119 }
1120 }
1121
1122 /* Fill in the chip specific driver values */
1123 if ( kind == any_chip ) {
1124 type_name = "lm85";
1125 } else if ( kind == lm85b ) {
1126 type_name = "lm85b";
1127 } else if ( kind == lm85c ) {
1128 type_name = "lm85c";
1129 } else if ( kind == adm1027 ) {
1130 type_name = "adm1027";
1131 } else if ( kind == adt7463 ) {
1132 type_name = "adt7463";
1133 } else if ( kind == emc6d100){
1134 type_name = "emc6d100";
1135 } else if ( kind == emc6d102 ) {
1136 type_name = "emc6d102";
1137 }
1138 strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
1139
1140 /* Fill in the remaining client fields */
1141 data->type = kind;
1142 data->valid = 0;
1143 init_MUTEX(&data->update_lock);
1144
1145 /* Tell the I2C layer a new client has arrived */
1146 if ((err = i2c_attach_client(new_client)))
1147 goto ERROR1;
1148
1149 /* Set the VRM version */
1150 data->vrm = vid_which_vrm();
1151
1152 /* Initialize the LM85 chip */
1153 lm85_init_client(new_client);
1154
1155 /* Register sysfs hooks */
1156 data->class_dev = hwmon_device_register(&new_client->dev);
1157 if (IS_ERR(data->class_dev)) {
1158 err = PTR_ERR(data->class_dev);
1159 goto ERROR2;
1160 }
1161
1162 device_create_file(&new_client->dev, &dev_attr_fan1_input);
1163 device_create_file(&new_client->dev, &dev_attr_fan2_input);
1164 device_create_file(&new_client->dev, &dev_attr_fan3_input);
1165 device_create_file(&new_client->dev, &dev_attr_fan4_input);
1166 device_create_file(&new_client->dev, &dev_attr_fan1_min);
1167 device_create_file(&new_client->dev, &dev_attr_fan2_min);
1168 device_create_file(&new_client->dev, &dev_attr_fan3_min);
1169 device_create_file(&new_client->dev, &dev_attr_fan4_min);
1170 device_create_file(&new_client->dev, &dev_attr_pwm1);
1171 device_create_file(&new_client->dev, &dev_attr_pwm2);
1172 device_create_file(&new_client->dev, &dev_attr_pwm3);
1173 device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
1174 device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
1175 device_create_file(&new_client->dev, &dev_attr_pwm3_enable);
1176 device_create_file(&new_client->dev, &dev_attr_in0_input);
1177 device_create_file(&new_client->dev, &dev_attr_in1_input);
1178 device_create_file(&new_client->dev, &dev_attr_in2_input);
1179 device_create_file(&new_client->dev, &dev_attr_in3_input);
1180 device_create_file(&new_client->dev, &dev_attr_in4_input);
1181 device_create_file(&new_client->dev, &dev_attr_in0_min);
1182 device_create_file(&new_client->dev, &dev_attr_in1_min);
1183 device_create_file(&new_client->dev, &dev_attr_in2_min);
1184 device_create_file(&new_client->dev, &dev_attr_in3_min);
1185 device_create_file(&new_client->dev, &dev_attr_in4_min);
1186 device_create_file(&new_client->dev, &dev_attr_in0_max);
1187 device_create_file(&new_client->dev, &dev_attr_in1_max);
1188 device_create_file(&new_client->dev, &dev_attr_in2_max);
1189 device_create_file(&new_client->dev, &dev_attr_in3_max);
1190 device_create_file(&new_client->dev, &dev_attr_in4_max);
1191 device_create_file(&new_client->dev, &dev_attr_temp1_input);
1192 device_create_file(&new_client->dev, &dev_attr_temp2_input);
1193 device_create_file(&new_client->dev, &dev_attr_temp3_input);
1194 device_create_file(&new_client->dev, &dev_attr_temp1_min);
1195 device_create_file(&new_client->dev, &dev_attr_temp2_min);
1196 device_create_file(&new_client->dev, &dev_attr_temp3_min);
1197 device_create_file(&new_client->dev, &dev_attr_temp1_max);
1198 device_create_file(&new_client->dev, &dev_attr_temp2_max);
1199 device_create_file(&new_client->dev, &dev_attr_temp3_max);
1200 device_create_file(&new_client->dev, &dev_attr_vrm);
1201 device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
1202 device_create_file(&new_client->dev, &dev_attr_alarms);
1203 device_create_file(&new_client->dev, &dev_attr_pwm1_auto_channels);
1204 device_create_file(&new_client->dev, &dev_attr_pwm2_auto_channels);
1205 device_create_file(&new_client->dev, &dev_attr_pwm3_auto_channels);
1206 device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_min);
1207 device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_min);
1208 device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_min);
1209 device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_minctl);
1210 device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_minctl);
1211 device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_minctl);
1212 device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_freq);
1213 device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_freq);
1214 device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_freq);
1215 device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_off);
1216 device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_off);
1217 device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_off);
1218 device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_min);
1219 device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_min);
1220 device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_min);
1221 device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_max);
1222 device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_max);
1223 device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_max);
1224 device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_crit);
1225 device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_crit);
1226 device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_crit);
1227
1228 return 0;
1229
1230 /* Error out and cleanup code */
1231 ERROR2:
1232 i2c_detach_client(new_client);
1233 ERROR1:
1234 kfree(data);
1235 ERROR0:
1236 return err;
1237 }
1238
1239 int lm85_detach_client(struct i2c_client *client)
1240 {
1241 struct lm85_data *data = i2c_get_clientdata(client);
1242 hwmon_device_unregister(data->class_dev);
1243 i2c_detach_client(client);
1244 kfree(data);
1245 return 0;
1246 }
1247
1248
1249 int lm85_read_value(struct i2c_client *client, u8 reg)
1250 {
1251 int res;
1252
1253 /* What size location is it? */
1254 switch( reg ) {
1255 case LM85_REG_FAN(0) : /* Read WORD data */
1256 case LM85_REG_FAN(1) :
1257 case LM85_REG_FAN(2) :
1258 case LM85_REG_FAN(3) :
1259 case LM85_REG_FAN_MIN(0) :
1260 case LM85_REG_FAN_MIN(1) :
1261 case LM85_REG_FAN_MIN(2) :
1262 case LM85_REG_FAN_MIN(3) :
1263 case LM85_REG_ALARM1 : /* Read both bytes at once */
1264 res = i2c_smbus_read_byte_data(client, reg) & 0xff ;
1265 res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ;
1266 break ;
1267 case ADT7463_REG_TMIN_CTL1 : /* Read WORD MSB, LSB */
1268 res = i2c_smbus_read_byte_data(client, reg) << 8 ;
1269 res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ;
1270 break ;
1271 default: /* Read BYTE data */
1272 res = i2c_smbus_read_byte_data(client, reg);
1273 break ;
1274 }
1275
1276 return res ;
1277 }
1278
1279 int lm85_write_value(struct i2c_client *client, u8 reg, int value)
1280 {
1281 int res ;
1282
1283 switch( reg ) {
1284 case LM85_REG_FAN(0) : /* Write WORD data */
1285 case LM85_REG_FAN(1) :
1286 case LM85_REG_FAN(2) :
1287 case LM85_REG_FAN(3) :
1288 case LM85_REG_FAN_MIN(0) :
1289 case LM85_REG_FAN_MIN(1) :
1290 case LM85_REG_FAN_MIN(2) :
1291 case LM85_REG_FAN_MIN(3) :
1292 /* NOTE: ALARM is read only, so not included here */
1293 res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ;
1294 res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ;
1295 break ;
1296 case ADT7463_REG_TMIN_CTL1 : /* Write WORD MSB, LSB */
1297 res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff);
1298 res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ;
1299 break ;
1300 default: /* Write BYTE data */
1301 res = i2c_smbus_write_byte_data(client, reg, value);
1302 break ;
1303 }
1304
1305 return res ;
1306 }
1307
1308 void lm85_init_client(struct i2c_client *client)
1309 {
1310 int value;
1311 struct lm85_data *data = i2c_get_clientdata(client);
1312
1313 dev_dbg(&client->dev, "Initializing device\n");
1314
1315 /* Warn if part was not "READY" */
1316 value = lm85_read_value(client, LM85_REG_CONFIG);
1317 dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value);
1318 if( value & 0x02 ) {
1319 dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n",
1320 i2c_adapter_id(client->adapter), client->addr );
1321 };
1322 if( ! (value & 0x04) ) {
1323 dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n",
1324 i2c_adapter_id(client->adapter), client->addr );
1325 };
1326 if( value & 0x10
1327 && ( data->type == adm1027
1328 || data->type == adt7463 ) ) {
1329 dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set. "
1330 "Please report this to the lm85 maintainer.\n",
1331 i2c_adapter_id(client->adapter), client->addr );
1332 };
1333
1334 /* WE INTENTIONALLY make no changes to the limits,
1335 * offsets, pwms, fans and zones. If they were
1336 * configured, we don't want to mess with them.
1337 * If they weren't, the default is 100% PWM, no
1338 * control and will suffice until 'sensors -s'
1339 * can be run by the user.
1340 */
1341
1342 /* Start monitoring */
1343 value = lm85_read_value(client, LM85_REG_CONFIG);
1344 /* Try to clear LOCK, Set START, save everything else */
1345 value = (value & ~ 0x02) | 0x01 ;
1346 dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value);
1347 lm85_write_value(client, LM85_REG_CONFIG, value);
1348 }
1349
1350 static struct lm85_data *lm85_update_device(struct device *dev)
1351 {
1352 struct i2c_client *client = to_i2c_client(dev);
1353 struct lm85_data *data = i2c_get_clientdata(client);
1354 int i;
1355
1356 down(&data->update_lock);
1357
1358 if ( !data->valid ||
1359 time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) {
1360 /* Things that change quickly */
1361 dev_dbg(&client->dev, "Reading sensor values\n");
1362
1363 /* Have to read extended bits first to "freeze" the
1364 * more significant bits that are read later.
1365 */
1366 if ( (data->type == adm1027) || (data->type == adt7463) ) {
1367 int ext1 = lm85_read_value(client,
1368 ADM1027_REG_EXTEND_ADC1);
1369 int ext2 = lm85_read_value(client,
1370 ADM1027_REG_EXTEND_ADC2);
1371 int val = (ext1 << 8) + ext2;
1372
1373 for(i = 0; i <= 4; i++)
1374 data->in_ext[i] = (val>>(i * 2))&0x03;
1375
1376 for(i = 0; i <= 2; i++)
1377 data->temp_ext[i] = (val>>((i + 5) * 2))&0x03;
1378 }
1379
1380 /* adc_scale is 2^(number of LSBs). There are 4 extra bits in
1381 the emc6d102 and 2 in the adt7463 and adm1027. In all
1382 other chips ext is always 0 and the value of scale is
1383 irrelevant. So it is left in 4*/
1384 data->adc_scale = (data->type == emc6d102 ) ? 16 : 4;
1385
1386 for (i = 0; i <= 4; ++i) {
1387 data->in[i] =
1388 lm85_read_value(client, LM85_REG_IN(i));
1389 }
1390
1391 for (i = 0; i <= 3; ++i) {
1392 data->fan[i] =
1393 lm85_read_value(client, LM85_REG_FAN(i));
1394 }
1395
1396 for (i = 0; i <= 2; ++i) {
1397 data->temp[i] =
1398 lm85_read_value(client, LM85_REG_TEMP(i));
1399 }
1400
1401 for (i = 0; i <= 2; ++i) {
1402 data->pwm[i] =
1403 lm85_read_value(client, LM85_REG_PWM(i));
1404 }
1405
1406 data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
1407
1408 if ( data->type == adt7463 ) {
1409 if( data->therm_total < ULONG_MAX - 256 ) {
1410 data->therm_total +=
1411 lm85_read_value(client, ADT7463_REG_THERM );
1412 }
1413 } else if ( data->type == emc6d100 ) {
1414 /* Three more voltage sensors */
1415 for (i = 5; i <= 7; ++i) {
1416 data->in[i] =
1417 lm85_read_value(client, EMC6D100_REG_IN(i));
1418 }
1419 /* More alarm bits */
1420 data->alarms |=
1421 lm85_read_value(client, EMC6D100_REG_ALARM3) << 16;
1422 } else if (data->type == emc6d102 ) {
1423 /* Have to read LSB bits after the MSB ones because
1424 the reading of the MSB bits has frozen the
1425 LSBs (backward from the ADM1027).
1426 */
1427 int ext1 = lm85_read_value(client,
1428 EMC6D102_REG_EXTEND_ADC1);
1429 int ext2 = lm85_read_value(client,
1430 EMC6D102_REG_EXTEND_ADC2);
1431 int ext3 = lm85_read_value(client,
1432 EMC6D102_REG_EXTEND_ADC3);
1433 int ext4 = lm85_read_value(client,
1434 EMC6D102_REG_EXTEND_ADC4);
1435 data->in_ext[0] = ext3 & 0x0f;
1436 data->in_ext[1] = ext4 & 0x0f;
1437 data->in_ext[2] = (ext4 >> 4) & 0x0f;
1438 data->in_ext[3] = (ext3 >> 4) & 0x0f;
1439 data->in_ext[4] = (ext2 >> 4) & 0x0f;
1440
1441 data->temp_ext[0] = ext1 & 0x0f;
1442 data->temp_ext[1] = ext2 & 0x0f;
1443 data->temp_ext[2] = (ext1 >> 4) & 0x0f;
1444 }
1445
1446 data->last_reading = jiffies ;
1447 }; /* last_reading */
1448
1449 if ( !data->valid ||
1450 time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) {
1451 /* Things that don't change often */
1452 dev_dbg(&client->dev, "Reading config values\n");
1453
1454 for (i = 0; i <= 4; ++i) {
1455 data->in_min[i] =
1456 lm85_read_value(client, LM85_REG_IN_MIN(i));
1457 data->in_max[i] =
1458 lm85_read_value(client, LM85_REG_IN_MAX(i));
1459 }
1460
1461 if ( data->type == emc6d100 ) {
1462 for (i = 5; i <= 7; ++i) {
1463 data->in_min[i] =
1464 lm85_read_value(client, EMC6D100_REG_IN_MIN(i));
1465 data->in_max[i] =
1466 lm85_read_value(client, EMC6D100_REG_IN_MAX(i));
1467 }
1468 }
1469
1470 for (i = 0; i <= 3; ++i) {
1471 data->fan_min[i] =
1472 lm85_read_value(client, LM85_REG_FAN_MIN(i));
1473 }
1474
1475 for (i = 0; i <= 2; ++i) {
1476 data->temp_min[i] =
1477 lm85_read_value(client, LM85_REG_TEMP_MIN(i));
1478 data->temp_max[i] =
1479 lm85_read_value(client, LM85_REG_TEMP_MAX(i));
1480 }
1481
1482 data->vid = lm85_read_value(client, LM85_REG_VID);
1483
1484 for (i = 0; i <= 2; ++i) {
1485 int val ;
1486 data->autofan[i].config =
1487 lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
1488 val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
1489 data->autofan[i].freq = val & 0x07 ;
1490 data->zone[i].range = (val >> 4) & 0x0f ;
1491 data->autofan[i].min_pwm =
1492 lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
1493 data->zone[i].limit =
1494 lm85_read_value(client, LM85_REG_AFAN_LIMIT(i));
1495 data->zone[i].critical =
1496 lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i));
1497 }
1498
1499 i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
1500 data->smooth[0] = i & 0x0f ;
1501 data->syncpwm3 = i & 0x10 ; /* Save PWM3 config */
1502 data->autofan[0].min_off = (i & 0x20) != 0 ;
1503 data->autofan[1].min_off = (i & 0x40) != 0 ;
1504 data->autofan[2].min_off = (i & 0x80) != 0 ;
1505 i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2);
1506 data->smooth[1] = (i>>4) & 0x0f ;
1507 data->smooth[2] = i & 0x0f ;
1508
1509 i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
1510 data->zone[0].hyst = (i>>4) & 0x0f ;
1511 data->zone[1].hyst = i & 0x0f ;
1512
1513 i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
1514 data->zone[2].hyst = (i>>4) & 0x0f ;
1515
1516 if ( (data->type == lm85b) || (data->type == lm85c) ) {
1517 data->tach_mode = lm85_read_value(client,
1518 LM85_REG_TACH_MODE );
1519 data->spinup_ctl = lm85_read_value(client,
1520 LM85_REG_SPINUP_CTL );
1521 } else if ( (data->type == adt7463) || (data->type == adm1027) ) {
1522 if ( data->type == adt7463 ) {
1523 for (i = 0; i <= 2; ++i) {
1524 data->oppoint[i] = lm85_read_value(client,
1525 ADT7463_REG_OPPOINT(i) );
1526 }
1527 data->tmin_ctl = lm85_read_value(client,
1528 ADT7463_REG_TMIN_CTL1 );
1529 data->therm_limit = lm85_read_value(client,
1530 ADT7463_REG_THERM_LIMIT );
1531 }
1532 for (i = 0; i <= 2; ++i) {
1533 data->temp_offset[i] = lm85_read_value(client,
1534 ADM1027_REG_TEMP_OFFSET(i) );
1535 }
1536 data->tach_mode = lm85_read_value(client,
1537 ADM1027_REG_CONFIG3 );
1538 data->fan_ppr = lm85_read_value(client,
1539 ADM1027_REG_FAN_PPR );
1540 }
1541
1542 data->last_config = jiffies;
1543 }; /* last_config */
1544
1545 data->valid = 1;
1546
1547 up(&data->update_lock);
1548
1549 return data;
1550 }
1551
1552
1553 static int __init sm_lm85_init(void)
1554 {
1555 return i2c_add_driver(&lm85_driver);
1556 }
1557
1558 static void __exit sm_lm85_exit(void)
1559 {
1560 i2c_del_driver(&lm85_driver);
1561 }
1562
1563 /* Thanks to Richard Barrington for adding the LM85 to sensors-detect.
1564 * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with
1565 * post 2.7.0 CVS changes.
1566 */
1567 MODULE_LICENSE("GPL");
1568 MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>, Justin Thiessen <jthiessen@penguincomputing.com");
1569 MODULE_DESCRIPTION("LM85-B, LM85-C driver");
1570
1571 module_init(sm_lm85_init);
1572 module_exit(sm_lm85_exit);
Verdex Pro support