1 /* $Id: nj_u.c,v 2.14.2.3 2004/01/13 14:31:26 keil Exp $
3 * This software may be used and distributed according to the terms
4 * of the GNU General Public License, incorporated herein by reference.
8 #include <linux/config.h>
9 #include <linux/init.h>
13 #include <linux/pci.h>
14 #include <linux/interrupt.h>
15 #include <linux/ppp_defs.h>
18 static const char *NETjet_U_revision
= "$Revision: 2.14.2.3 $";
20 static u_char
dummyrr(struct IsdnCardState
*cs
, int chan
, u_char off
)
25 static void dummywr(struct IsdnCardState
*cs
, int chan
, u_char off
, u_char value
)
30 netjet_u_interrupt(int intno
, void *dev_id
, struct pt_regs
*regs
)
32 struct IsdnCardState
*cs
= dev_id
;
36 spin_lock_irqsave(&cs
->lock
, flags
);
37 if (!((sval
= bytein(cs
->hw
.njet
.base
+ NETJET_IRQSTAT1
)) &
39 val
= NETjet_ReadIC(cs
, ICC_ISTA
);
40 if (cs
->debug
& L1_DEB_ISAC
)
41 debugl1(cs
, "tiger: i1 %x %x", sval
, val
);
43 icc_interrupt(cs
, val
);
44 NETjet_WriteIC(cs
, ICC_MASK
, 0xFF);
45 NETjet_WriteIC(cs
, ICC_MASK
, 0x0);
48 /* start new code 13/07/00 GE */
49 /* set bits in sval to indicate which page is free */
50 if (inl(cs
->hw
.njet
.base
+ NETJET_DMA_WRITE_ADR
) <
51 inl(cs
->hw
.njet
.base
+ NETJET_DMA_WRITE_IRQ
))
52 /* the 2nd write page is free */
54 else /* the 1st write page is free */
56 if (inl(cs
->hw
.njet
.base
+ NETJET_DMA_READ_ADR
) <
57 inl(cs
->hw
.njet
.base
+ NETJET_DMA_READ_IRQ
))
58 /* the 2nd read page is free */
60 else /* the 1st read page is free */
62 if (sval
!= cs
->hw
.njet
.last_is0
) /* we have a DMA interrupt */
64 if (test_and_set_bit(FLG_LOCK_ATOMIC
, &cs
->HW_Flags
)) {
65 spin_unlock_irqrestore(&cs
->lock
, flags
);
68 cs
->hw
.njet
.irqstat0
= sval
;
69 if ((cs
->hw
.njet
.irqstat0
& NETJET_IRQM0_READ
) !=
70 (cs
->hw
.njet
.last_is0
& NETJET_IRQM0_READ
))
71 /* we have a read dma int */
73 if ((cs
->hw
.njet
.irqstat0
& NETJET_IRQM0_WRITE
) !=
74 (cs
->hw
.njet
.last_is0
& NETJET_IRQM0_WRITE
))
75 /* we have a write dma int */
77 /* end new code 13/07/00 GE */
78 test_and_clear_bit(FLG_LOCK_ATOMIC
, &cs
->HW_Flags
);
80 spin_unlock_irqrestore(&cs
->lock
, flags
);
85 reset_netjet_u(struct IsdnCardState
*cs
)
87 cs
->hw
.njet
.ctrl_reg
= 0xff; /* Reset On */
88 byteout(cs
->hw
.njet
.base
+ NETJET_CTRL
, cs
->hw
.njet
.ctrl_reg
);
90 cs
->hw
.njet
.ctrl_reg
= 0x40; /* Reset Off and status read clear */
91 /* now edge triggered for TJ320 GE 13/07/00 */
92 byteout(cs
->hw
.njet
.base
+ NETJET_CTRL
, cs
->hw
.njet
.ctrl_reg
);
94 cs
->hw
.njet
.auxd
= 0xC0;
95 cs
->hw
.njet
.dmactrl
= 0;
96 byteout(cs
->hw
.njet
.auxa
, 0);
97 byteout(cs
->hw
.njet
.base
+ NETJET_AUXCTRL
, ~NETJET_ISACIRQ
);
98 byteout(cs
->hw
.njet
.base
+ NETJET_IRQMASK1
, NETJET_ISACIRQ
);
99 byteout(cs
->hw
.njet
.auxa
, cs
->hw
.njet
.auxd
);
103 NETjet_U_card_msg(struct IsdnCardState
*cs
, int mt
, void *arg
)
109 spin_lock_irqsave(&cs
->lock
, flags
);
111 spin_unlock_irqrestore(&cs
->lock
, flags
);
114 release_io_netjet(cs
);
117 spin_lock_irqsave(&cs
->lock
, flags
);
120 clear_pending_icc_ints(cs
);
122 /* Reenable all IRQ */
123 cs
->writeisac(cs
, ICC_MASK
, 0);
124 spin_unlock_irqrestore(&cs
->lock
, flags
);
132 static struct pci_dev
*dev_netjet __initdata
= NULL
;
135 setup_netjet_u(struct IsdnCard
*card
)
138 struct IsdnCardState
*cs
= card
->cs
;
143 #error "not running on big endian machines now"
145 strcpy(tmp
, NETjet_U_revision
);
146 printk(KERN_INFO
"HiSax: Traverse Tech. NETspider-U driver Rev. %s\n", HiSax_getrev(tmp
));
147 if (cs
->typ
!= ISDN_CTYPE_NETJET_U
)
149 test_and_clear_bit(FLG_LOCK_ATOMIC
, &cs
->HW_Flags
);
155 if ((dev_netjet
= pci_find_device(PCI_VENDOR_ID_TIGERJET
,
156 PCI_DEVICE_ID_TIGERJET_300
, dev_netjet
))) {
157 if (pci_enable_device(dev_netjet
))
159 pci_set_master(dev_netjet
);
160 cs
->irq
= dev_netjet
->irq
;
162 printk(KERN_WARNING
"NETspider-U: No IRQ for PCI card found\n");
165 cs
->hw
.njet
.base
= pci_resource_start(dev_netjet
, 0);
166 if (!cs
->hw
.njet
.base
) {
167 printk(KERN_WARNING
"NETspider-U: No IO-Adr for PCI card found\n");
171 printk(KERN_WARNING
"NETspider-U: No PCI card found\n");
175 cs
->hw
.njet
.auxa
= cs
->hw
.njet
.base
+ NETJET_AUXDATA
;
176 cs
->hw
.njet
.isac
= cs
->hw
.njet
.base
| NETJET_ISAC_OFF
;
179 cs
->hw
.njet
.ctrl_reg
= 0xff; /* Reset On */
180 byteout(cs
->hw
.njet
.base
+ NETJET_CTRL
, cs
->hw
.njet
.ctrl_reg
);
183 cs
->hw
.njet
.ctrl_reg
= 0x00; /* Reset Off and status read clear */
184 byteout(cs
->hw
.njet
.base
+ NETJET_CTRL
, cs
->hw
.njet
.ctrl_reg
);
187 cs
->hw
.njet
.auxd
= 0xC0;
188 cs
->hw
.njet
.dmactrl
= 0;
190 byteout(cs
->hw
.njet
.auxa
, 0);
191 byteout(cs
->hw
.njet
.base
+ NETJET_AUXCTRL
, ~NETJET_ISACIRQ
);
192 byteout(cs
->hw
.njet
.base
+ NETJET_IRQMASK1
, NETJET_ISACIRQ
);
193 byteout(cs
->hw
.njet
.auxa
, cs
->hw
.njet
.auxd
);
195 switch ( ( ( NETjet_ReadIC( cs
, ICC_RBCH
) >> 5 ) & 3 ) )
201 printk( KERN_WARNING
"NETspider-U: NETjet-S PCI card found\n" );
205 printk( KERN_WARNING
"NETspider-U: No PCI card found\n" );
212 printk(KERN_WARNING
"NETspider-U: NO_PCI_BIOS\n");
213 printk(KERN_WARNING
"NETspider-U: unable to config NETspider-U PCI\n");
216 #endif /* CONFIG_PCI */
221 "NETspider-U: PCI card configured at %#lx IRQ %d\n",
222 cs
->hw
.njet
.base
, cs
->irq
);
223 if (!request_region(cs
->hw
.njet
.base
, bytecnt
, "netspider-u isdn")) {
225 "HiSax: %s config port %#lx-%#lx already in use\n",
228 cs
->hw
.njet
.base
+ bytecnt
);
232 cs
->readisac
= &NETjet_ReadIC
;
233 cs
->writeisac
= &NETjet_WriteIC
;
234 cs
->readisacfifo
= &NETjet_ReadICfifo
;
235 cs
->writeisacfifo
= &NETjet_WriteICfifo
;
236 cs
->BC_Read_Reg
= &dummyrr
;
237 cs
->BC_Write_Reg
= &dummywr
;
238 cs
->BC_Send_Data
= &netjet_fill_dma
;
239 cs
->cardmsg
= &NETjet_U_card_msg
;
240 cs
->irq_func
= &netjet_u_interrupt
;
241 cs
->irq_flags
|= SA_SHIRQ
;
242 ICCVersion(cs
, "NETspider-U:");