drivers/isdn/hisax/st5481.h

   1 /*
   2  * Driver for ST5481 USB ISDN modem
   3  *
   4  * Author       Frode Isaksen
   5  * Copyright    2001 by Frode Isaksen      <fisaksen@bewan.com>
   6  *              2001 by Kai Germaschewski  <kai.germaschewski@gmx.de>
   7  *
   8  * This software may be used and distributed according to the terms
   9  * of the GNU General Public License, incorporated herein by reference.
  10  *
  11  */
  12
  13 #ifndef _ST5481_H_
  14 #define _ST5481_H_
  15
  16 #include <linux/config.h>
  17
  18 // USB IDs, the Product Id is in the range 0x4810-0x481F
  19
  20 #define ST_VENDOR_ID 0x0483
  21 #define ST5481_PRODUCT_ID 0x4810
  22 #define ST5481_PRODUCT_ID_MASK 0xFFF0
  23
  24 // ST5481 endpoints when using alternative setting 3 (2B+D).
  25 // To get the endpoint address, OR with 0x80 for IN endpoints.
  26
  27 #define EP_CTRL   0x00U /* Control endpoint */
  28 #define EP_INT    0x01U /* Interrupt endpoint */
  29 #define EP_B1_OUT 0x02U /* B1 channel out */
  30 #define EP_B1_IN  0x03U /* B1 channel in */
  31 #define EP_B2_OUT 0x04U /* B2 channel out */
  32 #define EP_B2_IN  0x05U /* B2 channel in */
  33 #define EP_D_OUT  0x06U /* D channel out */
  34 #define EP_D_IN   0x07U /* D channel in */
  35
  36 // Number of isochronous packets. With 20 packets we get
  37 // 50 interrupts/sec for each endpoint.
  38
  39 #define NUM_ISO_PACKETS_D      20
  40 #define NUM_ISO_PACKETS_B      20
  41
  42 // Size of each isochronous packet.
  43 // In outgoing direction we need to match ISDN data rates:
  44 // D:  2 bytes / msec -> 16 kbit / s
  45 // B: 16 bytes / msec -> 64 kbit / s
  46 #define SIZE_ISO_PACKETS_D_IN  16
  47 #define SIZE_ISO_PACKETS_D_OUT 2
  48 #define SIZE_ISO_PACKETS_B_IN  32
  49 #define SIZE_ISO_PACKETS_B_OUT 8
  50
  51 // If we overrun/underrun, we send one packet with +/- 2 bytes
  52 #define B_FLOW_ADJUST 2
  53
  54 // Registers that are written using vendor specific device request
  55 // on endpoint 0.
  56
  57 #define LBA                     0x02 /* S loopback */
  58 #define SET_DEFAULT             0x06 /* Soft reset */
  59 #define LBB                     0x1D /* S maintenance loopback */
  60 #define STT                     0x1e /* S force transmission signals */
  61 #define SDA_MIN                 0x20 /* SDA-sin minimal value */
  62 #define SDA_MAX                 0x21 /* SDA-sin maximal value */
  63 #define SDELAY_VALUE            0x22 /* Delay between Tx and Rx clock */
  64 #define IN_D_COUNTER            0x36 /* D receive channel fifo counter */
  65 #define OUT_D_COUNTER           0x37 /* D transmit channel fifo counter */
  66 #define IN_B1_COUNTER           0x38 /* B1 receive channel fifo counter */
  67 #define OUT_B1_COUNTER          0x39 /* B1 transmit channel fifo counter */
  68 #define IN_B2_COUNTER           0x3a /* B2 receive channel fifo counter */
  69 #define OUT_B2_COUNTER          0x3b /* B2 transmit channel fifo counter */
  70 #define FFCTRL_IN_D             0x3C /* D receive channel fifo threshold low */
  71 #define FFCTRH_IN_D             0x3D /* D receive channel fifo threshold high */
  72 #define FFCTRL_OUT_D            0x3E /* D transmit channel fifo threshold low */
  73 #define FFCTRH_OUT_D            0x3F /* D transmit channel fifo threshold high */
  74 #define FFCTRL_IN_B1            0x40 /* B1 receive channel fifo threshold low */
  75 #define FFCTRH_IN_B1            0x41 /* B1 receive channel fifo threshold high */
  76 #define FFCTRL_OUT_B1           0x42 /* B1 transmit channel fifo threshold low */
  77 #define FFCTRH_OUT_B1           0x43 /* B1 transmit channel fifo threshold high */
  78 #define FFCTRL_IN_B2            0x44 /* B2 receive channel fifo threshold low */
  79 #define FFCTRH_IN_B2            0x45 /* B2 receive channel fifo threshold high */
  80 #define FFCTRL_OUT_B2           0x46 /* B2 transmit channel fifo threshold low */
  81 #define FFCTRH_OUT_B2           0x47 /* B2 transmit channel fifo threshold high */
  82 #define MPMSK                   0x4A /* Multi purpose interrupt MASK register */
  83 #define FFMSK_D                 0x4c /* D fifo interrupt MASK register */
  84 #define FFMSK_B1                0x4e /* B1 fifo interrupt MASK register */
  85 #define FFMSK_B2                0x50 /* B2 fifo interrupt MASK register */
  86 #define GPIO_DIR                0x52 /* GPIO pins direction registers */
  87 #define GPIO_OUT                0x53 /* GPIO pins output register */
  88 #define GPIO_IN                 0x54 /* GPIO pins input register */
  89 #define TXCI                    0x56 /* CI command to be transmitted */
  90
  91
  92 // Format of the interrupt packet received on endpoint 1:
  93 //
  94 // +--------+--------+--------+--------+--------+--------+
  95 // !MPINT   !FFINT_D !FFINT_B1!FFINT_B2!CCIST   !GPIO_INT!
  96 // +--------+--------+--------+--------+--------+--------+
  97
  98 // Offsets in the interrupt packet
  99
 100 #define MPINT                   0
 101 #define FFINT_D                 1
 102 #define FFINT_B1                2
 103 #define FFINT_B2                3
 104 #define CCIST                   4
 105 #define GPIO_INT                5
 106 #define INT_PKT_SIZE            6
 107
 108 // MPINT
 109 #define LSD_INT                 0x80 /* S line activity detected */
 110 #define RXCI_INT                0x40 /* Indicate primitive arrived */
 111 #define DEN_INT                 0x20 /* Signal enabling data out of D Tx fifo */
 112 #define DCOLL_INT               0x10 /* D channel collision */
 113 #define AMIVN_INT               0x04 /* AMI violation number reached 2 */
 114 #define INFOI_INT               0x04 /* INFOi changed */
 115 #define DRXON_INT               0x02 /* Reception channel active */
 116 #define GPCHG_INT               0x01 /* GPIO pin value changed */
 117
 118 // FFINT_x
 119 #define IN_OVERRUN              0x80 /* In fifo overrun */
 120 #define OUT_UNDERRUN            0x40 /* Out fifo underrun */
 121 #define IN_UP                   0x20 /* In fifo thresholdh up-crossed */
 122 #define IN_DOWN                 0x10 /* In fifo thresholdl down-crossed */
 123 #define OUT_UP                  0x08 /* Out fifo thresholdh up-crossed */
 124 #define OUT_DOWN                0x04 /* Out fifo thresholdl down-crossed */
 125 #define IN_COUNTER_ZEROED       0x02 /* In down-counter reached 0 */
 126 #define OUT_COUNTER_ZEROED      0x01 /* Out down-counter reached 0 */
 127
 128 #define ANY_REC_INT     (IN_OVERRUN+IN_UP+IN_DOWN+IN_COUNTER_ZEROED)
 129 #define ANY_XMIT_INT    (OUT_UNDERRUN+OUT_UP+OUT_DOWN+OUT_COUNTER_ZEROED)
 130
 131
 132 // Level 1 commands that are sent using the TXCI device request
 133 #define ST5481_CMD_DR            0x0 /* Deactivation Request */
 134 #define ST5481_CMD_RES           0x1 /* state machine RESet */
 135 #define ST5481_CMD_TM1           0x2 /* Test Mode 1 */
 136 #define ST5481_CMD_TM2           0x3 /* Test Mode 2 */
 137 #define ST5481_CMD_PUP           0x7 /* Power UP */
 138 #define ST5481_CMD_AR8           0x8 /* Activation Request class 1 */
 139 #define ST5481_CMD_AR10          0x9 /* Activation Request class 2 */
 140 #define ST5481_CMD_ARL           0xA /* Activation Request Loopback */
 141 #define ST5481_CMD_PDN           0xF /* Power DoWn */
 142
 143 // Turn on/off the LEDs using the GPIO device request.
 144 // To use the B LEDs, number_of_leds must be set to 4
 145 #define B1_LED          0x10U
 146 #define B2_LED          0x20U
 147 #define GREEN_LED       0x40U
 148 #define RED_LED         0x80U
 149
 150 // D channel out states
 151 enum {
 152         ST_DOUT_NONE,
 153
 154         ST_DOUT_SHORT_INIT,
 155         ST_DOUT_SHORT_WAIT_DEN,
 156
 157         ST_DOUT_LONG_INIT,
 158         ST_DOUT_LONG_WAIT_DEN,
 159         ST_DOUT_NORMAL,
 160
 161         ST_DOUT_WAIT_FOR_UNDERRUN,
 162         ST_DOUT_WAIT_FOR_NOT_BUSY,
 163         ST_DOUT_WAIT_FOR_STOP,
 164         ST_DOUT_WAIT_FOR_RESET,
 165 };
 166
 167 #define DOUT_STATE_COUNT (ST_DOUT_WAIT_FOR_RESET + 1)
 168
 169 // D channel out events
 170 enum {
 171         EV_DOUT_START_XMIT,
 172         EV_DOUT_COMPLETE,
 173         EV_DOUT_DEN,
 174         EV_DOUT_RESETED,
 175         EV_DOUT_STOPPED,
 176         EV_DOUT_COLL,
 177         EV_DOUT_UNDERRUN,
 178 };
 179
 180 #define DOUT_EVENT_COUNT (EV_DOUT_UNDERRUN + 1)
 181
 182 // ----------------------------------------------------------------------
 183
 184 enum {
 185         ST_L1_F3,
 186         ST_L1_F4,
 187         ST_L1_F6,
 188         ST_L1_F7,
 189         ST_L1_F8,
 190 };
 191
 192 #define L1_STATE_COUNT (ST_L1_F8+1)
 193
 194 // The first 16 entries match the Level 1 indications that
 195 // are found at offset 4 (CCIST) in the interrupt packet
 196
 197 enum {
 198         EV_IND_DP,  // 0000 Deactivation Pending
 199         EV_IND_1,   // 0001
 200         EV_IND_2,   // 0010
 201         EV_IND_3,   // 0011
 202         EV_IND_RSY, // 0100 ReSYnchronizing
 203         EV_IND_5,   // 0101
 204         EV_IND_6,   // 0110
 205         EV_IND_7,   // 0111
 206         EV_IND_AP,  // 1000 Activation Pending
 207         EV_IND_9,   // 1001
 208         EV_IND_10,  // 1010
 209         EV_IND_11,  // 1011
 210         EV_IND_AI8, // 1100 Activation Indication class 8
 211         EV_IND_AI10,// 1101 Activation Indication class 10
 212         EV_IND_AIL, // 1110 Activation Indication Loopback
 213         EV_IND_DI,  // 1111 Deactivation Indication
 214         EV_PH_ACTIVATE_REQ,
 215         EV_PH_DEACTIVATE_REQ,
 216         EV_TIMER3,
 217 };
 218
 219 #define L1_EVENT_COUNT (EV_TIMER3 + 1)
 220
 221 #define ERR(format, arg...) \
 222 printk(KERN_ERR "%s:%s: " format "\n" , __FILE__,  __FUNCTION__ , ## arg)
 223
 224 #define WARN(format, arg...) \
 225 printk(KERN_WARNING "%s:%s: " format "\n" , __FILE__,  __FUNCTION__ , ## arg)
 226
 227 #define INFO(format, arg...) \
 228 printk(KERN_INFO "%s:%s: " format "\n" , __FILE__,  __FUNCTION__ , ## arg)
 229
 230 #include "isdnhdlc.h"
 231 #include "fsm.h"
 232 #include "hisax_if.h"
 233 #include <linux/skbuff.h>
 234
 235 /* ======================================================================
 236  * FIFO handling
 237  */
 238
 239 /* Generic FIFO structure */
 240 struct fifo {
 241         u_char r,w,count,size;
 242         spinlock_t lock;
 243 };
 244
 245 /*
 246  * Init an FIFO
 247  */
 248 static inline void fifo_init(struct fifo *fifo, int size)
 249 {
 250         fifo->r = fifo->w = fifo->count = 0;
 251         fifo->size = size;
 252         spin_lock_init(&fifo->lock);
 253 }
 254
 255 /*
 256  * Add an entry to the FIFO
 257  */
 258 static inline int fifo_add(struct fifo *fifo)
 259 {
 260         unsigned long flags;
 261         int index;
 262
 263         if (!fifo) {
 264                 return -1;
 265         }
 266
 267         spin_lock_irqsave(&fifo->lock, flags);
 268         if (fifo->count == fifo->size) {
 269                 // FIFO full
 270                 index = -1;
 271         } else {
 272                 // Return index where to get the next data to add to the FIFO
 273                 index = fifo->w++ & (fifo->size-1);
 274                 fifo->count++;
 275         }
 276         spin_unlock_irqrestore(&fifo->lock, flags);
 277         return index;
 278 }
 279
 280 /*
 281  * Remove an entry from the FIFO with the index returned.
 282  */
 283 static inline int fifo_remove(struct fifo *fifo)
 284 {
 285         unsigned long flags;
 286         int index;
 287
 288         if (!fifo) {
 289                 return -1;
 290         }
 291
 292         spin_lock_irqsave(&fifo->lock, flags);
 293         if (!fifo->count) {
 294                 // FIFO empty
 295                 index = -1;
 296         } else {
 297                 // Return index where to get the next data from the FIFO
 298                 index = fifo->r++ & (fifo->size-1);
 299                 fifo->count--;
 300         }
 301         spin_unlock_irqrestore(&fifo->lock, flags);
 302
 303         return index;
 304 }
 305
 306 /* ======================================================================
 307  * control pipe
 308  */
 309 typedef void (*ctrl_complete_t)(void *);
 310
 311 typedef struct ctrl_msg {
 312         struct usb_ctrlrequest dr;
 313         ctrl_complete_t complete;
 314         void *context;
 315 } ctrl_msg;
 316
 317 /* FIFO of ctrl messages waiting to be sent */
 318 #define MAX_EP0_MSG 16
 319 struct ctrl_msg_fifo {
 320         struct fifo f;
 321         struct ctrl_msg data[MAX_EP0_MSG];
 322 };
 323
 324 #define MAX_DFRAME_LEN_L1       300
 325 #define HSCX_BUFMAX     4096
 326
 327 struct st5481_ctrl {
 328         struct ctrl_msg_fifo msg_fifo;
 329         unsigned long busy;
 330         struct urb *urb;
 331 };
 332
 333 struct st5481_intr {
 334   //    struct evt_fifo evt_fifo;
 335         struct urb *urb;
 336 };
 337
 338 struct st5481_d_out {
 339         struct isdnhdlc_vars hdlc_state;
 340         struct urb *urb[2]; /* double buffering */
 341         unsigned long busy;
 342         struct sk_buff *tx_skb;
 343         struct FsmInst fsm;
 344 };
 345
 346 struct st5481_b_out {
 347         struct isdnhdlc_vars hdlc_state;
 348         struct urb *urb[2]; /* double buffering */
 349         u_char flow_event;
 350         u_long busy;
 351         struct sk_buff *tx_skb;
 352 };
 353
 354 struct st5481_in {
 355         struct isdnhdlc_vars hdlc_state;
 356         struct urb *urb[2]; /* double buffering */
 357         int mode;
 358         int bufsize;
 359         unsigned int num_packets;
 360         unsigned int packet_size;
 361         unsigned char ep, counter;
 362         unsigned char *rcvbuf;
 363         struct st5481_adapter *adapter;
 364         struct hisax_if *hisax_if;
 365 };
 366
 367 int st5481_setup_in(struct st5481_in *in);
 368 void st5481_release_in(struct st5481_in *in);
 369 void st5481_in_mode(struct st5481_in *in, int mode);
 370
 371 struct st5481_bcs {
 372         struct hisax_b_if b_if;
 373         struct st5481_adapter *adapter;
 374         struct st5481_in b_in;
 375         struct st5481_b_out b_out;
 376         int channel;
 377         int mode;
 378 };
 379
 380 struct st5481_adapter {
 381         struct list_head list;
 382         int number_of_leds;
 383         struct usb_device *usb_dev;
 384         struct hisax_d_if hisax_d_if;
 385
 386         struct st5481_ctrl ctrl;
 387         struct st5481_intr intr;
 388         struct st5481_in d_in;
 389         struct st5481_d_out d_out;
 390
 391         unsigned char leds;
 392         unsigned int led_counter;
 393
 394         unsigned long event;
 395
 396         struct FsmInst l1m;
 397         struct FsmTimer timer;
 398
 399         struct st5481_bcs bcs[2];
 400 };
 401
 402 #define TIMER3_VALUE 7000
 403
 404 /* ======================================================================
 405  *
 406  */
 407
 408 /*
 409  * Submit an URB with error reporting. This is a macro so
 410  * the __FUNCTION__ returns the caller function name.
 411  */
 412 #define SUBMIT_URB(urb, mem_flags) \
 413 ({ \
 414         int status; \
 415         if ((status = usb_submit_urb(urb, mem_flags)) < 0) { \
 416                 WARN("usb_submit_urb failed,status=%d", status); \
 417         } \
 418         status; \
 419 })
 420
 421 /*
 422  * USB double buffering, return the URB index (0 or 1).
 423  */
 424 static inline int get_buf_nr(struct urb *urbs[], struct urb *urb)
 425 {
 426         return (urbs[0]==urb ? 0 : 1);
 427 }
 428
 429 /* ---------------------------------------------------------------------- */
 430
 431 /* B Channel */
 432
 433 int  st5481_setup_b(struct st5481_bcs *bcs);
 434 void st5481_release_b(struct st5481_bcs *bcs);
 435 void st5481_d_l2l1(struct hisax_if *hisax_d_if, int pr, void *arg);
 436
 437 /* D Channel */
 438
 439 int  st5481_setup_d(struct st5481_adapter *adapter);
 440 void st5481_release_d(struct st5481_adapter *adapter);
 441 void st5481_b_l2l1(struct hisax_if *b_if, int pr, void *arg);
 442 int  st5481_d_init(void);
 443 void st5481_d_exit(void);
 444
 445 /* USB */
 446 void st5481_ph_command(struct st5481_adapter *adapter, unsigned int command);
 447 int st5481_setup_isocpipes(struct urb* urb[2], struct usb_device *dev,
 448                            unsigned int pipe, int num_packets,
 449                            int packet_size, int buf_size,
 450                            usb_complete_t complete, void *context);
 451 void st5481_release_isocpipes(struct urb* urb[2]);
 452
 453 void st5481_usb_pipe_reset(struct st5481_adapter *adapter,
 454                     u_char pipe, ctrl_complete_t complete, void *context);
 455 void st5481_usb_device_ctrl_msg(struct st5481_adapter *adapter,
 456                          u8 request, u16 value,
 457                          ctrl_complete_t complete, void *context);
 458 int  st5481_setup_usb(struct st5481_adapter *adapter);
 459 void st5481_release_usb(struct st5481_adapter *adapter);
 460 void st5481_start(struct st5481_adapter *adapter);
 461 void st5481_stop(struct st5481_adapter *adapter);
 462
 463 // ----------------------------------------------------------------------
 464 // debugging macros
 465
 466 #define __debug_variable st5481_debug
 467 #include "hisax_debug.h"
 468
 469 #ifdef CONFIG_HISAX_DEBUG
 470
 471 extern int st5481_debug;
 472
 473 #define DBG_ISO_PACKET(level,urb) \
 474   if (level & __debug_variable) dump_iso_packet(__FUNCTION__,urb)
 475
 476 static void __attribute__((unused))
 477 dump_iso_packet(const char *name, struct urb *urb)
 478 {
 479         int i,j;
 480         int len,ofs;
 481         u_char *data;
 482
 483         printk(KERN_DEBUG "%s: packets=%d,errors=%d\n",
 484                name,urb->number_of_packets,urb->error_count);
 485         for (i = 0; i  < urb->number_of_packets; ++i) {
 486                 if (urb->pipe & USB_DIR_IN) {
 487                         len = urb->iso_frame_desc[i].actual_length;
 488                 } else {
 489                         len = urb->iso_frame_desc[i].length;
 490                 }
 491                 ofs = urb->iso_frame_desc[i].offset;
 492                 printk(KERN_DEBUG "len=%.2d,ofs=%.3d ",len,ofs);
 493                 if (len) {
 494                         data = urb->transfer_buffer+ofs;
 495                         for (j=0; j < len; j++) {
 496                                 printk ("%.2x", data[j]);
 497                         }
 498                 }
 499                 printk("\n");
 500         }
 501 }
 502
 503 static inline const char *ST5481_CMD_string(int evt)
 504 {
 505         static char s[16];
 506
 507         switch (evt) {
 508         case ST5481_CMD_DR: return "DR";
 509         case ST5481_CMD_RES: return "RES";
 510         case ST5481_CMD_TM1: return "TM1";
 511         case ST5481_CMD_TM2: return "TM2";
 512         case ST5481_CMD_PUP: return "PUP";
 513         case ST5481_CMD_AR8: return "AR8";
 514         case ST5481_CMD_AR10: return "AR10";
 515         case ST5481_CMD_ARL: return "ARL";
 516         case ST5481_CMD_PDN: return "PDN";
 517         };
 518
 519         sprintf(s,"0x%x",evt);
 520         return s;
 521 }
 522
 523 #else
 524
 525 #define DBG_ISO_PACKET(level,urb) do {} while (0)
 526
 527 #endif
 528
 529
 530
 531 #endif