[PATCH] W1: w1_netlink: New init/fini netlink callbacks.

[linux-2.6/verdex.git] / drivers / net / wireless / spectrum_cs.c

/*
 * Driver for 802.11b cards using RAM-loadable Symbol firmware, such as
 * Symbol Wireless Networker LA4100, CompactFlash cards by Socket
 * Communications and Intel PRO/Wireless 2011B.
 *
 * The driver implements Symbol firmware download.  The rest is handled
 * in hermes.c and orinoco.c.
 *
 * Utilities for downloading the Symbol firmware are available at
 * http://sourceforge.net/projects/orinoco/
 *
 * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
 * Portions based on orinoco_cs.c:
 *      Copyright (C) David Gibson, Linuxcare Australia
 * Portions based on Spectrum24tDnld.c from original spectrum24 driver:
 *      Copyright (C) Symbol Technologies.
 *
 * See copyright notice in file orinoco.c.
 */

#define DRIVER_NAME "spectrum_cs"
#define PFX DRIVER_NAME ": "

#include <linux/config.h>
#ifdef  __IN_PCMCIA_PACKAGE__
#include <pcmcia/k_compat.h>
#endif /* __IN_PCMCIA_PACKAGE__ */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/wireless.h>

#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>

#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/system.h>

#include "orinoco.h"

/*
 * If SPECTRUM_FW_INCLUDED is defined, the firmware is hardcoded into
 * the driver.  Use get_symbol_fw script to generate spectrum_fw.h and
 * copy it to the same directory as spectrum_cs.c.
 *
 * If SPECTRUM_FW_INCLUDED is not defined, the firmware is loaded at the
 * runtime using hotplug.  Use the same get_symbol_fw script to generate
 * files symbol_sp24t_prim_fw symbol_sp24t_sec_fw, copy them to the
 * hotplug firmware directory (typically /usr/lib/hotplug/firmware) and
 * make sure that you have hotplug installed and enabled in the kernel.
 */
/* #define SPECTRUM_FW_INCLUDED 1 */

#ifdef SPECTRUM_FW_INCLUDED
/* Header with the firmware */
#include "spectrum_fw.h"
#else   /* !SPECTRUM_FW_INCLUDED */
#include <linux/firmware.h>
static unsigned char *primsym;
static unsigned char *secsym;
static const char primary_fw_name[] = "symbol_sp24t_prim_fw";
static const char secondary_fw_name[] = "symbol_sp24t_sec_fw";
#endif  /* !SPECTRUM_FW_INCLUDED */

/********************************************************************/
/* Module stuff                                                     */
/********************************************************************/

MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
MODULE_DESCRIPTION("Driver for Symbol Spectrum24 Trilogy cards with firmware downloader");
MODULE_LICENSE("Dual MPL/GPL");

/* Module parameters */

/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
 * don't have any CIS entry for it. This workaround it... */
static int ignore_cis_vcc; /* = 0 */
module_param(ignore_cis_vcc, int, 0);
MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");

/********************************************************************/
/* Magic constants                                                  */
/********************************************************************/

/*
 * The dev_info variable is the "key" that is used to match up this
 * device driver with appropriate cards, through the card
 * configuration database.
 */
static dev_info_t dev_info = DRIVER_NAME;

/********************************************************************/
/* Data structures                                                  */
/********************************************************************/

/* PCMCIA specific device information (goes in the card field of
 * struct orinoco_private */
struct orinoco_pccard {
        dev_link_t link;
        dev_node_t node;
};

/*
 * A linked list of "instances" of the device.  Each actual PCMCIA
 * card corresponds to one device instance, and is described by one
 * dev_link_t structure (defined in ds.h).
 */
static dev_link_t *dev_list; /* = NULL */

/********************************************************************/
/* Function prototypes                                              */
/********************************************************************/

/* device methods */
static int spectrum_cs_hard_reset(struct orinoco_private *priv);

/* PCMCIA gumpf */
static void spectrum_cs_config(dev_link_t * link);
static void spectrum_cs_release(dev_link_t * link);
static int spectrum_cs_event(event_t event, int priority,
                            event_callback_args_t * args);

static dev_link_t *spectrum_cs_attach(void);
static void spectrum_cs_detach(dev_link_t *);

/********************************************************************/
/* Firmware downloader                                              */
/********************************************************************/

/* Position of PDA in the adapter memory */
#define EEPROM_ADDR     0x3000
#define EEPROM_LEN      0x200
#define PDA_OFFSET      0x100

#define PDA_ADDR        (EEPROM_ADDR + PDA_OFFSET)
#define PDA_WORDS       ((EEPROM_LEN - PDA_OFFSET) / 2)

/* Constants for the CISREG_CCSR register */
#define HCR_RUN         0x07    /* run firmware after reset */
#define HCR_IDLE        0x0E    /* don't run firmware after reset */
#define HCR_MEM16       0x10    /* memory width bit, should be preserved */

/*
 * AUX port access.  To unlock the AUX port write the access keys to the
 * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
 * register.  Then read it and make sure it's HERMES_AUX_ENABLED.
 */
#define HERMES_AUX_ENABLE       0x8000  /* Enable auxiliary port access */
#define HERMES_AUX_DISABLE      0x4000  /* Disable to auxiliary port access */
#define HERMES_AUX_ENABLED      0xC000  /* Auxiliary port is open */

#define HERMES_AUX_PW0  0xFE01
#define HERMES_AUX_PW1  0xDC23
#define HERMES_AUX_PW2  0xBA45

/* End markers */
#define PDI_END         0x00000000      /* End of PDA */
#define BLOCK_END       0xFFFFFFFF      /* Last image block */
#define TEXT_END        0x1A            /* End of text header */

/*
 * The following structures have little-endian fields denoted by
 * the leading underscore.  Don't access them directly - use inline
 * functions defined below.
 */

/*
 * The binary image to be downloaded consists of series of data blocks.
 * Each block has the following structure.
 */
struct dblock {
        u32 _addr;              /* adapter address where to write the block */
        u16 _len;               /* length of the data only, in bytes */
        char data[0];           /* data to be written */
} __attribute__ ((packed));

/*
 * Plug Data References are located in in the image after the last data
 * block.  They refer to areas in the adapter memory where the plug data
 * items with matching ID should be written.
 */
struct pdr {
        u32 _id;                /* record ID */
        u32 _addr;              /* adapter address where to write the data */
        u32 _len;               /* expected length of the data, in bytes */
        char next[0];           /* next PDR starts here */
} __attribute__ ((packed));


/*
 * Plug Data Items are located in the EEPROM read from the adapter by
 * primary firmware.  They refer to the device-specific data that should
 * be plugged into the secondary firmware.
 */
struct pdi {
        u16 _len;               /* length of ID and data, in words */
        u16 _id;                /* record ID */
        char data[0];           /* plug data */
} __attribute__ ((packed));;


/* Functions for access to little-endian data */
static inline u32
dblock_addr(const struct dblock *blk)
{
        return le32_to_cpu(blk->_addr);
}

static inline u32
dblock_len(const struct dblock *blk)
{
        return le16_to_cpu(blk->_len);
}

static inline u32
pdr_id(const struct pdr *pdr)
{
        return le32_to_cpu(pdr->_id);
}

static inline u32
pdr_addr(const struct pdr *pdr)
{
        return le32_to_cpu(pdr->_addr);
}

static inline u32
pdr_len(const struct pdr *pdr)
{
        return le32_to_cpu(pdr->_len);
}

static inline u32
pdi_id(const struct pdi *pdi)
{
        return le16_to_cpu(pdi->_id);
}

/* Return length of the data only, in bytes */
static inline u32
pdi_len(const struct pdi *pdi)
{
        return 2 * (le16_to_cpu(pdi->_len) - 1);
}


/* Set address of the auxiliary port */
static inline void
spectrum_aux_setaddr(hermes_t *hw, u32 addr)
{
        hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
        hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
}


/* Open access to the auxiliary port */
static int
spectrum_aux_open(hermes_t *hw)
{
        int i;

        /* Already open? */
        if (hermes_read_reg(hw, HERMES_CONTROL) == HERMES_AUX_ENABLED)
                return 0;

        hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
        hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
        hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
        hermes_write_reg(hw, HERMES_CONTROL, HERMES_AUX_ENABLE);

        for (i = 0; i < 20; i++) {
                udelay(10);
                if (hermes_read_reg(hw, HERMES_CONTROL) ==
                    HERMES_AUX_ENABLED)
                        return 0;
        }

        return -EBUSY;
}


#define CS_CHECK(fn, ret) \
  do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)

/*
 * Reset the card using configuration registers COR and CCSR.
 * If IDLE is 1, stop the firmware, so that it can be safely rewritten.
 */
static int
spectrum_reset(dev_link_t *link, int idle)
{
        int last_ret, last_fn;
        conf_reg_t reg;
        u_int save_cor;

        /* Doing it if hardware is gone is guaranteed crash */
        if (!(link->state & DEV_CONFIG))
                return -ENODEV;

        /* Save original COR value */
        reg.Function = 0;
        reg.Action = CS_READ;
        reg.Offset = CISREG_COR;
        CS_CHECK(AccessConfigurationRegister,
                 pcmcia_access_configuration_register(link->handle, &reg));
        save_cor = reg.Value;

        /* Soft-Reset card */
        reg.Action = CS_WRITE;
        reg.Offset = CISREG_COR;
        reg.Value = (save_cor | COR_SOFT_RESET);
        CS_CHECK(AccessConfigurationRegister,
                 pcmcia_access_configuration_register(link->handle, &reg));
        udelay(1000);

        /* Read CCSR */
        reg.Action = CS_READ;
        reg.Offset = CISREG_CCSR;
        CS_CHECK(AccessConfigurationRegister,
                 pcmcia_access_configuration_register(link->handle, &reg));

        /*
         * Start or stop the firmware.  Memory width bit should be
         * preserved from the value we've just read.
         */
        reg.Action = CS_WRITE;
        reg.Offset = CISREG_CCSR;
        reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
        CS_CHECK(AccessConfigurationRegister,
                 pcmcia_access_configuration_register(link->handle, &reg));
        udelay(1000);

        /* Restore original COR configuration index */
        reg.Action = CS_WRITE;
        reg.Offset = CISREG_COR;
        reg.Value = (save_cor & ~COR_SOFT_RESET);
        CS_CHECK(AccessConfigurationRegister,
                 pcmcia_access_configuration_register(link->handle, &reg));
        udelay(1000);
        return 0;

      cs_failed:
        cs_error(link->handle, last_fn, last_ret);
        return -ENODEV;
}


/*
 * Scan PDR for the record with the specified RECORD_ID.
 * If it's not found, return NULL.
 */
static struct pdr *
spectrum_find_pdr(struct pdr *first_pdr, u32 record_id)
{
        struct pdr *pdr = first_pdr;

        while (pdr_id(pdr) != PDI_END) {
                /*
                 * PDR area is currently not terminated by PDI_END.
                 * It's followed by CRC records, which have the type
                 * field where PDR has length.  The type can be 0 or 1.
                 */
                if (pdr_len(pdr) < 2)
                        return NULL;

                /* If the record ID matches, we are done */
                if (pdr_id(pdr) == record_id)
                        return pdr;

                pdr = (struct pdr *) pdr->next;
        }
        return NULL;
}


/* Process one Plug Data Item - find corresponding PDR and plug it */
static int
spectrum_plug_pdi(hermes_t *hw, struct pdr *first_pdr, struct pdi *pdi)
{
        struct pdr *pdr;

        /* Find the PDI corresponding to this PDR */
        pdr = spectrum_find_pdr(first_pdr, pdi_id(pdi));

        /* No match is found, safe to ignore */
        if (!pdr)
                return 0;

        /* Lengths of the data in PDI and PDR must match */
        if (pdi_len(pdi) != pdr_len(pdr))
                return -EINVAL;

        /* do the actual plugging */
        spectrum_aux_setaddr(hw, pdr_addr(pdr));
        hermes_write_words(hw, HERMES_AUXDATA, pdi->data,
                           pdi_len(pdi) / 2);

        return 0;
}


/* Read PDA from the adapter */
static int
spectrum_read_pda(hermes_t *hw, u16 *pda, int pda_len)
{
        int ret;
        int pda_size;

        /* Issue command to read EEPROM */
        ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
        if (ret)
                return ret;

        /* Open auxiliary port */
        ret = spectrum_aux_open(hw);
        if (ret)
                return ret;

        /* read PDA from EEPROM */
        spectrum_aux_setaddr(hw, PDA_ADDR);
        hermes_read_words(hw, HERMES_AUXDATA, pda, pda_len / 2);

        /* Check PDA length */
        pda_size = le16_to_cpu(pda[0]);
        if (pda_size > pda_len)
                return -EINVAL;

        return 0;
}


/* Parse PDA and write the records into the adapter */
static int
spectrum_apply_pda(hermes_t *hw, const struct dblock *first_block,
                   u16 *pda)
{
        int ret;
        struct pdi *pdi;
        struct pdr *first_pdr;
        const struct dblock *blk = first_block;

        /* Skip all blocks to locate Plug Data References */
        while (dblock_addr(blk) != BLOCK_END)
                blk = (struct dblock *) &blk->data[dblock_len(blk)];

        first_pdr = (struct pdr *) blk;

        /* Go through every PDI and plug them into the adapter */
        pdi = (struct pdi *) (pda + 2);
        while (pdi_id(pdi) != PDI_END) {
                ret = spectrum_plug_pdi(hw, first_pdr, pdi);
                if (ret)
                        return ret;

                /* Increment to the next PDI */
                pdi = (struct pdi *) &pdi->data[pdi_len(pdi)];
        }
        return 0;
}


/* Load firmware blocks into the adapter */
static int
spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block)
{
        const struct dblock *blk;
        u32 blkaddr;
        u32 blklen;

        blk = first_block;
        blkaddr = dblock_addr(blk);
        blklen = dblock_len(blk);

        while (dblock_addr(blk) != BLOCK_END) {
                spectrum_aux_setaddr(hw, blkaddr);
                hermes_write_words(hw, HERMES_AUXDATA, blk->data,
                                   blklen / 2);

                blk = (struct dblock *) &blk->data[blklen];
                blkaddr = dblock_addr(blk);
                blklen = dblock_len(blk);
        }
        return 0;
}


/*
 * Process a firmware image - stop the card, load the firmware, reset
 * the card and make sure it responds.  For the secondary firmware take
 * care of the PDA - read it and then write it on top of the firmware.
 */
static int
spectrum_dl_image(hermes_t *hw, dev_link_t *link,
                  const unsigned char *image)
{
        int ret;
        const unsigned char *ptr;
        const struct dblock *first_block;

        /* Plug Data Area (PDA) */
        u16 pda[PDA_WORDS];

        /* Binary block begins after the 0x1A marker */
        ptr = image;
        while (*ptr++ != TEXT_END);
        first_block = (const struct dblock *) ptr;

        /* Read the PDA */
        if (image != primsym) {
                ret = spectrum_read_pda(hw, pda, sizeof(pda));
                if (ret)
                        return ret;
        }

        /* Stop the firmware, so that it can be safely rewritten */
        ret = spectrum_reset(link, 1);
        if (ret)
                return ret;

        /* Program the adapter with new firmware */
        ret = spectrum_load_blocks(hw, first_block);
        if (ret)
                return ret;

        /* Write the PDA to the adapter */
        if (image != primsym) {
                ret = spectrum_apply_pda(hw, first_block, pda);
                if (ret)
                        return ret;
        }

        /* Run the firmware */
        ret = spectrum_reset(link, 0);
        if (ret)
                return ret;

        /* Reset hermes chip and make sure it responds */
        ret = hermes_init(hw);

        /* hermes_reset() should return 0 with the secondary firmware */
        if (image != primsym && ret != 0)
                return -ENODEV;

        /* And this should work with any firmware */
        if (!hermes_present(hw))
                return -ENODEV;

        return 0;
}


/*
 * Download the firmware into the card, this also does a PCMCIA soft
 * reset on the card, to make sure it's in a sane state.
 */
static int
spectrum_dl_firmware(hermes_t *hw, dev_link_t *link)
{
        int ret;
        client_handle_t handle = link->handle;

#ifndef SPECTRUM_FW_INCLUDED
        const struct firmware *fw_entry;

        if (request_firmware(&fw_entry, primary_fw_name,
                             &handle_to_dev(handle)) == 0) {
                primsym = fw_entry->data;
        } else {
                printk(KERN_ERR PFX "Cannot find firmware: %s\n",
                       primary_fw_name);
                return -ENOENT;
        }

        if (request_firmware(&fw_entry, secondary_fw_name,
                             &handle_to_dev(handle)) == 0) {
                secsym = fw_entry->data;
        } else {
                printk(KERN_ERR PFX "Cannot find firmware: %s\n",
                       secondary_fw_name);
                return -ENOENT;
        }
#endif

        /* Load primary firmware */
        ret = spectrum_dl_image(hw, link, primsym);
        if (ret) {
                printk(KERN_ERR PFX "Primary firmware download failed\n");
                return ret;
        }

        /* Load secondary firmware */
        ret = spectrum_dl_image(hw, link, secsym);

        if (ret) {
                printk(KERN_ERR PFX "Secondary firmware download failed\n");
        }

        return ret;
}

/********************************************************************/
/* Device methods                                                   */
/********************************************************************/

static int
spectrum_cs_hard_reset(struct orinoco_private *priv)
{
        struct orinoco_pccard *card = priv->card;
        dev_link_t *link = &card->link;
        int err;

        if (!hermes_present(&priv->hw)) {
                /* The firmware needs to be reloaded */
                if (spectrum_dl_firmware(&priv->hw, &card->link) != 0) {
                        printk(KERN_ERR PFX "Firmware download failed\n");
                        err = -ENODEV;
                }
        } else {
                /* Soft reset using COR and HCR */
                spectrum_reset(link, 0);
        }

        return 0;
}

/********************************************************************/
/* PCMCIA stuff                                                     */
/********************************************************************/

/*
 * This creates an "instance" of the driver, allocating local data
 * structures for one device.  The device is registered with Card
 * Services.
 * 
 * The dev_link structure is initialized, but we don't actually
 * configure the card at this point -- we wait until we receive a card
 * insertion event.  */
static dev_link_t *
spectrum_cs_attach(void)
{
        struct net_device *dev;
        struct orinoco_private *priv;
        struct orinoco_pccard *card;
        dev_link_t *link;
        client_reg_t client_reg;
        int ret;

        dev = alloc_orinocodev(sizeof(*card), spectrum_cs_hard_reset);
        if (! dev)
                return NULL;
        priv = netdev_priv(dev);
        card = priv->card;

        /* Link both structures together */
        link = &card->link;
        link->priv = dev;

        /* Interrupt setup */
        link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
        link->irq.IRQInfo1 = IRQ_LEVEL_ID;
        link->irq.Handler = orinoco_interrupt;
        link->irq.Instance = dev; 

        /* General socket configuration defaults can go here.  In this
         * client, we assume very little, and rely on the CIS for
         * almost everything.  In most clients, many details (i.e.,
         * number, sizes, and attributes of IO windows) are fixed by
         * the nature of the device, and can be hard-wired here. */
        link->conf.Attributes = 0;
        link->conf.IntType = INT_MEMORY_AND_IO;

        /* Register with Card Services */
        /* FIXME: need a lock? */
        link->next = dev_list;
        dev_list = link;

        client_reg.dev_info = &dev_info;
        client_reg.Version = 0x0210; /* FIXME: what does this mean? */
        client_reg.event_callback_args.client_data = link;

        ret = pcmcia_register_client(&link->handle, &client_reg);
        if (ret != CS_SUCCESS) {
                cs_error(link->handle, RegisterClient, ret);
                spectrum_cs_detach(link);
                return NULL;
        }

        return link;
}                               /* spectrum_cs_attach */

/*
 * This deletes a driver "instance".  The device is de-registered with
 * Card Services.  If it has been released, all local data structures
 * are freed.  Otherwise, the structures will be freed when the device
 * is released.
 */
static void spectrum_cs_detach(dev_link_t *link)
{
        dev_link_t **linkp;
        struct net_device *dev = link->priv;

        /* Locate device structure */
        for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
                if (*linkp == link)
                        break;

        BUG_ON(*linkp == NULL);

        if (link->state & DEV_CONFIG)
                spectrum_cs_release(link);

        /* Break the link with Card Services */
        if (link->handle)
                pcmcia_deregister_client(link->handle);

        /* Unlink device structure, and free it */
        *linkp = link->next;
        DEBUG(0, PFX "detach: link=%p link->dev=%p\n", link, link->dev);
        if (link->dev) {
                DEBUG(0, PFX "About to unregister net device %p\n",
                      dev);
                unregister_netdev(dev);
        }
        free_orinocodev(dev);
}                               /* spectrum_cs_detach */

/*
 * spectrum_cs_config() is scheduled to run after a CARD_INSERTION
 * event is received, to configure the PCMCIA socket, and to make the
 * device available to the system.
 */

static void
spectrum_cs_config(dev_link_t *link)
{
        struct net_device *dev = link->priv;
        client_handle_t handle = link->handle;
        struct orinoco_private *priv = netdev_priv(dev);
        struct orinoco_pccard *card = priv->card;
        hermes_t *hw = &priv->hw;
        int last_fn, last_ret;
        u_char buf[64];
        config_info_t conf;
        cisinfo_t info;
        tuple_t tuple;
        cisparse_t parse;
        void __iomem *mem;

        CS_CHECK(ValidateCIS, pcmcia_validate_cis(handle, &info));

        /*
         * This reads the card's CONFIG tuple to find its
         * configuration registers.
         */
        tuple.DesiredTuple = CISTPL_CONFIG;
        tuple.Attributes = 0;
        tuple.TupleData = buf;
        tuple.TupleDataMax = sizeof(buf);
        tuple.TupleOffset = 0;
        CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
        CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
        CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
        link->conf.ConfigBase = parse.config.base;
        link->conf.Present = parse.config.rmask[0];

        /* Configure card */
        link->state |= DEV_CONFIG;

        /* Look up the current Vcc */
        CS_CHECK(GetConfigurationInfo,
                 pcmcia_get_configuration_info(handle, &conf));
        link->conf.Vcc = conf.Vcc;

        /*
         * In this loop, we scan the CIS for configuration table
         * entries, each of which describes a valid card
         * configuration, including voltage, IO window, memory window,
         * and interrupt settings.
         *
         * We make no assumptions about the card to be configured: we
         * use just the information available in the CIS.  In an ideal
         * world, this would work for any PCMCIA card, but it requires
         * a complete and accurate CIS.  In practice, a driver usually
         * "knows" most of these things without consulting the CIS,
         * and most client drivers will only use the CIS to fill in
         * implementation-defined details.
         */
        tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
        CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
        while (1) {
                cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
                cistpl_cftable_entry_t dflt = { .index = 0 };

                if ( (pcmcia_get_tuple_data(handle, &tuple) != 0)
                    || (pcmcia_parse_tuple(handle, &tuple, &parse) != 0))
                        goto next_entry;

                if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
                        dflt = *cfg;
                if (cfg->index == 0)
                        goto next_entry;
                link->conf.ConfigIndex = cfg->index;

                /* Does this card need audio output? */
                if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
                        link->conf.Attributes |= CONF_ENABLE_SPKR;
                        link->conf.Status = CCSR_AUDIO_ENA;
                }

                /* Use power settings for Vcc and Vpp if present */
                /* Note that the CIS values need to be rescaled */
                if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
                        if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
                                DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n",  conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
                                if (!ignore_cis_vcc)
                                        goto next_entry;
                        }
                } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
                        if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
                                DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n",  conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
                                if(!ignore_cis_vcc)
                                        goto next_entry;
                        }
                }

                if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
                        link->conf.Vpp1 = link->conf.Vpp2 =
                            cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
                else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
                        link->conf.Vpp1 = link->conf.Vpp2 =
                            dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
                
                /* Do we need to allocate an interrupt? */
                link->conf.Attributes |= CONF_ENABLE_IRQ;

                /* IO window settings */
                link->io.NumPorts1 = link->io.NumPorts2 = 0;
                if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
                        cistpl_io_t *io =
                            (cfg->io.nwin) ? &cfg->io : &dflt.io;
                        link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
                        if (!(io->flags & CISTPL_IO_8BIT))
                                link->io.Attributes1 =
                                    IO_DATA_PATH_WIDTH_16;
                        if (!(io->flags & CISTPL_IO_16BIT))
                                link->io.Attributes1 =
                                    IO_DATA_PATH_WIDTH_8;
                        link->io.IOAddrLines =
                            io->flags & CISTPL_IO_LINES_MASK;
                        link->io.BasePort1 = io->win[0].base;
                        link->io.NumPorts1 = io->win[0].len;
                        if (io->nwin > 1) {
                                link->io.Attributes2 =
                                    link->io.Attributes1;
                                link->io.BasePort2 = io->win[1].base;
                                link->io.NumPorts2 = io->win[1].len;
                        }

                        /* This reserves IO space but doesn't actually enable it */
                        if (pcmcia_request_io(link->handle, &link->io) != 0)
                                goto next_entry;
                }


                /* If we got this far, we're cool! */

                break;
                
        next_entry:
                if (link->io.NumPorts1)
                        pcmcia_release_io(link->handle, &link->io);
                last_ret = pcmcia_get_next_tuple(handle, &tuple);
                if (last_ret  == CS_NO_MORE_ITEMS) {
                        printk(KERN_ERR PFX "GetNextTuple(): No matching "
                               "CIS configuration.  Maybe you need the "
                               "ignore_cis_vcc=1 parameter.\n");
                        goto cs_failed;
                }
        }

        /*
         * Allocate an interrupt line.  Note that this does not assign
         * a handler to the interrupt, unless the 'Handler' member of
         * the irq structure is initialized.
         */
        CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));

        /* We initialize the hermes structure before completing PCMCIA
         * configuration just in case the interrupt handler gets
         * called. */
        mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
        if (!mem)
                goto cs_failed;

        hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);

        /*
         * This actually configures the PCMCIA socket -- setting up
         * the I/O windows and the interrupt mapping, and putting the
         * card and host interface into "Memory and IO" mode.
         */
        CS_CHECK(RequestConfiguration,
                 pcmcia_request_configuration(link->handle, &link->conf));

        /* Ok, we have the configuration, prepare to register the netdev */
        dev->base_addr = link->io.BasePort1;
        dev->irq = link->irq.AssignedIRQ;
        SET_MODULE_OWNER(dev);
        card->node.major = card->node.minor = 0;

        /* Reset card and download firmware */
        if (spectrum_cs_hard_reset(priv) != 0) {
                goto failed;
        }

        SET_NETDEV_DEV(dev, &handle_to_dev(handle));
        /* Tell the stack we exist */
        if (register_netdev(dev) != 0) {
                printk(KERN_ERR PFX "register_netdev() failed\n");
                goto failed;
        }

        /* At this point, the dev_node_t structure(s) needs to be
         * initialized and arranged in a linked list at link->dev. */
        strcpy(card->node.dev_name, dev->name);
        link->dev = &card->node; /* link->dev being non-NULL is also
                                    used to indicate that the
                                    net_device has been registered */
        link->state &= ~DEV_CONFIG_PENDING;

        /* Finally, report what we've done */
        printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d",
               dev->name, link->conf.ConfigIndex,
               link->conf.Vcc / 10, link->conf.Vcc % 10);
        if (link->conf.Vpp1)
                printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
                       link->conf.Vpp1 % 10);
        printk(", irq %d", link->irq.AssignedIRQ);
        if (link->io.NumPorts1)
                printk(", io 0x%04x-0x%04x", link->io.BasePort1,
                       link->io.BasePort1 + link->io.NumPorts1 - 1);
        if (link->io.NumPorts2)
                printk(" & 0x%04x-0x%04x", link->io.BasePort2,
                       link->io.BasePort2 + link->io.NumPorts2 - 1);
        printk("\n");

        return;

 cs_failed:
        cs_error(link->handle, last_fn, last_ret);

 failed:
        spectrum_cs_release(link);
}                               /* spectrum_cs_config */

/*
 * After a card is removed, spectrum_cs_release() will unregister the
 * device, and release the PCMCIA configuration.  If the device is
 * still open, this will be postponed until it is closed.
 */
static void
spectrum_cs_release(dev_link_t *link)
{
        struct net_device *dev = link->priv;
        struct orinoco_private *priv = netdev_priv(dev);
        unsigned long flags;

        /* We're committed to taking the device away now, so mark the
         * hardware as unavailable */
        spin_lock_irqsave(&priv->lock, flags);
        priv->hw_unavailable++;
        spin_unlock_irqrestore(&priv->lock, flags);

        /* Don't bother checking to see if these succeed or not */
        pcmcia_release_configuration(link->handle);
        if (link->io.NumPorts1)
                pcmcia_release_io(link->handle, &link->io);
        if (link->irq.AssignedIRQ)
                pcmcia_release_irq(link->handle, &link->irq);
        link->state &= ~DEV_CONFIG;
        if (priv->hw.iobase)
                ioport_unmap(priv->hw.iobase);
}                               /* spectrum_cs_release */

/*
 * The card status event handler.  Mostly, this schedules other stuff
 * to run after an event is received.
 */
static int
spectrum_cs_event(event_t event, int priority,
                       event_callback_args_t * args)
{
        dev_link_t *link = args->client_data;
        struct net_device *dev = link->priv;
        struct orinoco_private *priv = netdev_priv(dev);
        int err = 0;
        unsigned long flags;

        switch (event) {
        case CS_EVENT_CARD_REMOVAL:
                link->state &= ~DEV_PRESENT;
                if (link->state & DEV_CONFIG) {
                        unsigned long flags;

                        spin_lock_irqsave(&priv->lock, flags);
                        netif_device_detach(dev);
                        priv->hw_unavailable++;
                        spin_unlock_irqrestore(&priv->lock, flags);
                }
                break;

        case CS_EVENT_CARD_INSERTION:
                link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
                spectrum_cs_config(link);
                break;

        case CS_EVENT_PM_SUSPEND:
                link->state |= DEV_SUSPEND;
                /* Fall through... */
        case CS_EVENT_RESET_PHYSICAL:
                /* Mark the device as stopped, to block IO until later */
                if (link->state & DEV_CONFIG) {
                        /* This is probably racy, but I can't think of
                           a better way, short of rewriting the PCMCIA
                           layer to not suck :-( */
                        spin_lock_irqsave(&priv->lock, flags);

                        err = __orinoco_down(dev);
                        if (err)
                                printk(KERN_WARNING "%s: %s: Error %d downing interface\n",
                                       dev->name,
                                       event == CS_EVENT_PM_SUSPEND ? "SUSPEND" : "RESET_PHYSICAL",
                                       err);

                        netif_device_detach(dev);
                        priv->hw_unavailable++;

                        spin_unlock_irqrestore(&priv->lock, flags);

                        pcmcia_release_configuration(link->handle);
                }
                break;

        case CS_EVENT_PM_RESUME:
                link->state &= ~DEV_SUSPEND;
                /* Fall through... */
        case CS_EVENT_CARD_RESET:
                if (link->state & DEV_CONFIG) {
                        /* FIXME: should we double check that this is
                         * the same card as we had before */
                        pcmcia_request_configuration(link->handle, &link->conf);
                        netif_device_attach(dev);
                        priv->hw_unavailable--;
                        schedule_work(&priv->reset_work);
                }
                break;
        }

        return err;
}                               /* spectrum_cs_event */

/********************************************************************/
/* Module initialization                                            */
/********************************************************************/

/* Can't be declared "const" or the whole __initdata section will
 * become const */
static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
        " (Pavel Roskin <proski@gnu.org>,"
        " David Gibson <hermes@gibson.dropbear.id.au>, et al)";

static struct pcmcia_device_id spectrum_cs_ids[] = {
        PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4100 */
        PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */
        PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0001), /* Intel PRO/Wireless 2011B */
        PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids);

static struct pcmcia_driver orinoco_driver = {
        .owner          = THIS_MODULE,
        .drv            = {
                .name   = DRIVER_NAME,
        },
        .attach         = spectrum_cs_attach,
        .event          = spectrum_cs_event,
        .detach         = spectrum_cs_detach,
        .id_table       = spectrum_cs_ids,
};

static int __init
init_spectrum_cs(void)
{
        printk(KERN_DEBUG "%s\n", version);

        return pcmcia_register_driver(&orinoco_driver);
}

static void __exit
exit_spectrum_cs(void)
{
        pcmcia_unregister_driver(&orinoco_driver);
        BUG_ON(dev_list != NULL);
}

module_init(init_spectrum_cs);
module_exit(exit_spectrum_cs);