[PATCH] W1: w1_netlink: New init/fini netlink callbacks.

[linux-2.6/verdex.git] / drivers / s390 / char / tape_34xx.c

/*
 *  drivers/s390/char/tape_34xx.c
 *    tape device discipline for 3480/3490 tapes.
 *
 *  S390 and zSeries version
 *    Copyright (C) 2001,2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
 *    Author(s): Carsten Otte <cotte@de.ibm.com>
 *               Tuan Ngo-Anh <ngoanh@de.ibm.com>
 *               Martin Schwidefsky <schwidefsky@de.ibm.com>
 */

#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bio.h>
#include <linux/workqueue.h>

#define TAPE_DBF_AREA   tape_34xx_dbf

#include "tape.h"
#include "tape_std.h"

#define PRINTK_HEADER "TAPE_34XX: "

/*
 * Pointer to debug area.
 */
debug_info_t *TAPE_DBF_AREA = NULL;
EXPORT_SYMBOL(TAPE_DBF_AREA);

enum tape_34xx_type {
        tape_3480,
        tape_3490,
};

#define TAPE34XX_FMT_3480       0
#define TAPE34XX_FMT_3480_2_XF  1
#define TAPE34XX_FMT_3480_XF    2

struct tape_34xx_block_id {
        unsigned int    wrap            : 1;
        unsigned int    segment         : 7;
        unsigned int    format          : 2;
        unsigned int    block           : 22;
};

/*
 * A list of block ID's is used to faster seek blocks.
 */
struct tape_34xx_sbid {
        struct list_head                list;
        struct tape_34xx_block_id       bid;
};

static void tape_34xx_delete_sbid_from(struct tape_device *, int);

/*
 * Medium sense for 34xx tapes. There is no 'real' medium sense call.
 * So we just do a normal sense.
 */
static int
tape_34xx_medium_sense(struct tape_device *device)
{
        struct tape_request *request;
        unsigned char       *sense;
        int                  rc;

        request = tape_alloc_request(1, 32);
        if (IS_ERR(request)) {
                DBF_EXCEPTION(6, "MSEN fail\n");
                return PTR_ERR(request);
        }

        request->op = TO_MSEN;
        tape_ccw_end(request->cpaddr, SENSE, 32, request->cpdata);

        rc = tape_do_io_interruptible(device, request);
        if (request->rc == 0) {
                sense = request->cpdata;

                /*
                 * This isn't quite correct. But since INTERVENTION_REQUIRED
                 * means that the drive is 'neither ready nor on-line' it is
                 * only slightly inaccurate to say there is no tape loaded if
                 * the drive isn't online...
                 */
                if (sense[0] & SENSE_INTERVENTION_REQUIRED)
                        tape_med_state_set(device, MS_UNLOADED);
                else
                        tape_med_state_set(device, MS_LOADED);

                if (sense[1] & SENSE_WRITE_PROTECT)
                        device->tape_generic_status |= GMT_WR_PROT(~0);
                else
                        device->tape_generic_status &= ~GMT_WR_PROT(~0);
        } else {
                DBF_EVENT(4, "tape_34xx: medium sense failed with rc=%d\n",
                        request->rc);
        }
        tape_free_request(request);

        return rc;
}

/*
 * These functions are currently used only to schedule a medium_sense for
 * later execution. This is because we get an interrupt whenever a medium
 * is inserted but cannot call tape_do_io* from an interrupt context.
 * Maybe that's useful for other actions we want to start from the
 * interrupt handler.
 */
static void
tape_34xx_work_handler(void *data)
{
        struct {
                struct tape_device      *device;
                enum tape_op             op;
                struct work_struct       work;
        } *p = data;

        switch(p->op) {
                case TO_MSEN:
                        tape_34xx_medium_sense(p->device);
                        break;
                default:
                        DBF_EVENT(3, "T34XX: internal error: unknown work\n");
        }

        p->device = tape_put_device(p->device);
        kfree(p);
}

static int
tape_34xx_schedule_work(struct tape_device *device, enum tape_op op)
{
        struct {
                struct tape_device      *device;
                enum tape_op             op;
                struct work_struct       work;
        } *p;

        if ((p = kmalloc(sizeof(*p), GFP_ATOMIC)) == NULL)
                return -ENOMEM;

        memset(p, 0, sizeof(*p));
        INIT_WORK(&p->work, tape_34xx_work_handler, p);

        p->device = tape_get_device_reference(device);
        p->op     = op;

        schedule_work(&p->work);
        return 0;
}

/*
 * Done Handler is called when dev stat = DEVICE-END (successful operation)
 */
static inline int
tape_34xx_done(struct tape_request *request)
{
        DBF_EVENT(6, "%s done\n", tape_op_verbose[request->op]);

        switch (request->op) {
                case TO_DSE:
                case TO_RUN:
                case TO_WRI:
                case TO_WTM:
                case TO_ASSIGN:
                case TO_UNASSIGN:
                        tape_34xx_delete_sbid_from(request->device, 0);
                        break;
                default:
                        ;
        }
        return TAPE_IO_SUCCESS;
}

static inline int
tape_34xx_erp_failed(struct tape_request *request, int rc)
{
        DBF_EVENT(3, "Error recovery failed for %s (RC=%d)\n",
                  tape_op_verbose[request->op], rc);
        return rc;
}

static inline int
tape_34xx_erp_succeeded(struct tape_request *request)
{
        DBF_EVENT(3, "Error Recovery successful for %s\n",
                  tape_op_verbose[request->op]);
        return tape_34xx_done(request);
}

static inline int
tape_34xx_erp_retry(struct tape_request *request)
{
        DBF_EVENT(3, "xerp retr %s\n", tape_op_verbose[request->op]);
        return TAPE_IO_RETRY;
}

/*
 * This function is called, when no request is outstanding and we get an
 * interrupt
 */
static int
tape_34xx_unsolicited_irq(struct tape_device *device, struct irb *irb)
{
        if (irb->scsw.dstat == 0x85 /* READY */) {
                /* A medium was inserted in the drive. */
                DBF_EVENT(6, "xuud med\n");
                tape_34xx_delete_sbid_from(device, 0);
                tape_34xx_schedule_work(device, TO_MSEN);
        } else {
                DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id);
                PRINT_WARN("Unsolicited IRQ (Device End) caught.\n");
                tape_dump_sense(device, NULL, irb);
        }
        return TAPE_IO_SUCCESS;
}

/*
 * Read Opposite Error Recovery Function:
 * Used, when Read Forward does not work
 */
static int
tape_34xx_erp_read_opposite(struct tape_device *device,
                            struct tape_request *request)
{
        if (request->op == TO_RFO) {
                /*
                 * We did read forward, but the data could not be read
                 * *correctly*. We transform the request to a read backward
                 * and try again.
                 */
                tape_std_read_backward(device, request);
                return tape_34xx_erp_retry(request);
        }
        if (request->op != TO_RBA)
                PRINT_ERR("read_opposite called with state:%s\n",
                          tape_op_verbose[request->op]);
        /*
         * We tried to read forward and backward, but hat no
         * success -> failed.
         */
        return tape_34xx_erp_failed(request, -EIO);
}

static int
tape_34xx_erp_bug(struct tape_device *device, struct tape_request *request,
                  struct irb *irb, int no)
{
        if (request->op != TO_ASSIGN) {
                PRINT_WARN("An unexpected condition #%d was caught in "
                           "tape error recovery.\n", no);
                PRINT_WARN("Please report this incident.\n");
                if (request)
                        PRINT_WARN("Operation of tape:%s\n",
                                   tape_op_verbose[request->op]);
                tape_dump_sense(device, request, irb);
        }
        return tape_34xx_erp_failed(request, -EIO);
}

/*
 * Handle data overrun between cu and drive. The channel speed might
 * be too slow.
 */
static int
tape_34xx_erp_overrun(struct tape_device *device, struct tape_request *request,
                      struct irb *irb)
{
        if (irb->ecw[3] == 0x40) {
                PRINT_WARN ("Data overrun error between control-unit "
                            "and drive. Use a faster channel connection, "
                            "if possible! \n");
                return tape_34xx_erp_failed(request, -EIO);
        }
        return tape_34xx_erp_bug(device, request, irb, -1);
}

/*
 * Handle record sequence error.
 */
static int
tape_34xx_erp_sequence(struct tape_device *device,
                       struct tape_request *request, struct irb *irb)
{
        if (irb->ecw[3] == 0x41) {
                /*
                 * cu detected incorrect block-id sequence on tape.
                 */
                PRINT_WARN("Illegal block-id sequence found!\n");
                return tape_34xx_erp_failed(request, -EIO);
        }
        /*
         * Record sequence error bit is set, but erpa does not
         * show record sequence error.
         */
        return tape_34xx_erp_bug(device, request, irb, -2);
}

/*
 * This function analyses the tape's sense-data in case of a unit-check.
 * If possible, it tries to recover from the error. Else the user is
 * informed about the problem.
 */
static int
tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
                     struct irb *irb)
{
        int inhibit_cu_recovery;
        __u8* sense;

        inhibit_cu_recovery = (*device->modeset_byte & 0x80) ? 1 : 0;
        sense = irb->ecw;

#ifdef CONFIG_S390_TAPE_BLOCK
        if (request->op == TO_BLOCK) {
                /*
                 * Recovery for block device requests. Set the block_position
                 * to something invalid and retry.
                 */
                device->blk_data.block_position = -1;
                if (request->retries-- <= 0)
                        return tape_34xx_erp_failed(request, -EIO);
                else
                        return tape_34xx_erp_retry(request);
        }
#endif

        if (
                sense[0] & SENSE_COMMAND_REJECT &&
                sense[1] & SENSE_WRITE_PROTECT
        ) {
                if (
                        request->op == TO_DSE ||
                        request->op == TO_WRI ||
                        request->op == TO_WTM
                ) {
                        /* medium is write protected */
                        return tape_34xx_erp_failed(request, -EACCES);
                } else {
                        return tape_34xx_erp_bug(device, request, irb, -3);
                }
        }

        /*
         * Special cases for various tape-states when reaching
         * end of recorded area
         *
         * FIXME: Maybe a special case of the special case:
         *        sense[0] == SENSE_EQUIPMENT_CHECK &&
         *        sense[1] == SENSE_DRIVE_ONLINE    &&
         *        sense[3] == 0x47 (Volume Fenced)
         *
         *        This was caused by continued FSF or FSR after an
         *        'End Of Data'.
         */
        if ((
                sense[0] == SENSE_DATA_CHECK      ||
                sense[0] == SENSE_EQUIPMENT_CHECK ||
                sense[0] == SENSE_EQUIPMENT_CHECK + SENSE_DEFERRED_UNIT_CHECK
        ) && (
                sense[1] == SENSE_DRIVE_ONLINE ||
                sense[1] == SENSE_BEGINNING_OF_TAPE + SENSE_WRITE_MODE
        )) {
                switch (request->op) {
                /*
                 * sense[0] == SENSE_DATA_CHECK   &&
                 * sense[1] == SENSE_DRIVE_ONLINE
                 * sense[3] == 0x36 (End Of Data)
                 *
                 * Further seeks might return a 'Volume Fenced'.
                 */
                case TO_FSF:
                case TO_FSB:
                        /* Trying to seek beyond end of recorded area */
                        return tape_34xx_erp_failed(request, -ENOSPC);
                case TO_BSB:
                        return tape_34xx_erp_retry(request);

                /*
                 * sense[0] == SENSE_DATA_CHECK   &&
                 * sense[1] == SENSE_DRIVE_ONLINE &&
                 * sense[3] == 0x36 (End Of Data)
                 */
                case TO_LBL:
                        /* Block could not be located. */
                        tape_34xx_delete_sbid_from(device, 0);
                        return tape_34xx_erp_failed(request, -EIO);

                case TO_RFO:
                        /* Read beyond end of recorded area -> 0 bytes read */
                        return tape_34xx_erp_failed(request, 0);

                /*
                 * sense[0] == SENSE_EQUIPMENT_CHECK &&
                 * sense[1] == SENSE_DRIVE_ONLINE    &&
                 * sense[3] == 0x38 (Physical End Of Volume)
                 */
                case TO_WRI:
                        /* Writing at physical end of volume */
                        return tape_34xx_erp_failed(request, -ENOSPC);
                default:
                        PRINT_ERR("Invalid op in %s:%i\n",
                                  __FUNCTION__, __LINE__);
                        return tape_34xx_erp_failed(request, 0);
                }
        }

        /* Sensing special bits */
        if (sense[0] & SENSE_BUS_OUT_CHECK)
                return tape_34xx_erp_retry(request);

        if (sense[0] & SENSE_DATA_CHECK) {
                /*
                 * hardware failure, damaged tape or improper
                 * operating conditions
                 */
                switch (sense[3]) {
                case 0x23:
                        /* a read data check occurred */
                        if ((sense[2] & SENSE_TAPE_SYNC_MODE) ||
                            inhibit_cu_recovery)
                                // data check is not permanent, may be
                                // recovered. We always use async-mode with
                                // cu-recovery, so this should *never* happen.
                                return tape_34xx_erp_bug(device, request,
                                                         irb, -4);

                        /* data check is permanent, CU recovery has failed */
                        PRINT_WARN("Permanent read error\n");
                        return tape_34xx_erp_failed(request, -EIO);
                case 0x25:
                        // a write data check occurred
                        if ((sense[2] & SENSE_TAPE_SYNC_MODE) ||
                            inhibit_cu_recovery)
                                // data check is not permanent, may be
                                // recovered. We always use async-mode with
                                // cu-recovery, so this should *never* happen.
                                return tape_34xx_erp_bug(device, request,
                                                         irb, -5);

                        // data check is permanent, cu-recovery has failed
                        PRINT_WARN("Permanent write error\n");
                        return tape_34xx_erp_failed(request, -EIO);
                case 0x26:
                        /* Data Check (read opposite) occurred. */
                        return tape_34xx_erp_read_opposite(device, request);
                case 0x28:
                        /* ID-Mark at tape start couldn't be written */
                        PRINT_WARN("ID-Mark could not be written.\n");
                        return tape_34xx_erp_failed(request, -EIO);
                case 0x31:
                        /* Tape void. Tried to read beyond end of device. */
                        PRINT_WARN("Read beyond end of recorded area.\n");
                        return tape_34xx_erp_failed(request, -ENOSPC);
                case 0x41:
                        /* Record sequence error. */
                        PRINT_WARN("Invalid block-id sequence found.\n");
                        return tape_34xx_erp_failed(request, -EIO);
                default:
                        /* all data checks for 3480 should result in one of
                         * the above erpa-codes. For 3490, other data-check
                         * conditions do exist. */
                        if (device->cdev->id.driver_info == tape_3480)
                                return tape_34xx_erp_bug(device, request,
                                                         irb, -6);
                }
        }

        if (sense[0] & SENSE_OVERRUN)
                return tape_34xx_erp_overrun(device, request, irb);

        if (sense[1] & SENSE_RECORD_SEQUENCE_ERR)
                return tape_34xx_erp_sequence(device, request, irb);

        /* Sensing erpa codes */
        switch (sense[3]) {
        case 0x00:
                /* Unit check with erpa code 0. Report and ignore. */
                PRINT_WARN("Non-error sense was found. "
                           "Unit-check will be ignored.\n");
                return TAPE_IO_SUCCESS;
        case 0x21:
                /*
                 * Data streaming not operational. CU will switch to
                 * interlock mode. Reissue the command.
                 */
                PRINT_WARN("Data streaming not operational. "
                           "Switching to interlock-mode.\n");
                return tape_34xx_erp_retry(request);
        case 0x22:
                /*
                 * Path equipment check. Might be drive adapter error, buffer
                 * error on the lower interface, internal path not usable,
                 * or error during cartridge load.
                 */
                PRINT_WARN("A path equipment check occurred. One of the "
                           "following conditions occurred:\n");
                PRINT_WARN("drive adapter error, buffer error on the lower "
                           "interface, internal path not usable, error "
                           "during cartridge load.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x24:
                /*
                 * Load display check. Load display was command was issued,
                 * but the drive is displaying a drive check message. Can
                 * be threated as "device end".
                 */
                return tape_34xx_erp_succeeded(request);
        case 0x27:
                /*
                 * Command reject. May indicate illegal channel program or
                 * buffer over/underrun. Since all channel programs are
                 * issued by this driver and ought be correct, we assume a
                 * over/underrun situation and retry the channel program.
                 */
                return tape_34xx_erp_retry(request);
        case 0x29:
                /*
                 * Function incompatible. Either the tape is idrc compressed
                 * but the hardware isn't capable to do idrc, or a perform
                 * subsystem func is issued and the CU is not on-line.
                 */
                PRINT_WARN ("Function incompatible. Try to switch off idrc\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x2a:
                /*
                 * Unsolicited environmental data. An internal counter
                 * overflows, we can ignore this and reissue the cmd.
                 */
                return tape_34xx_erp_retry(request);
        case 0x2b:
                /*
                 * Environmental data present. Indicates either unload
                 * completed ok or read buffered log command completed ok.
                 */
                if (request->op == TO_RUN) {
                        /* Rewind unload completed ok. */
                        tape_med_state_set(device, MS_UNLOADED);
                        return tape_34xx_erp_succeeded(request);
                }
                /* tape_34xx doesn't use read buffered log commands. */
                return tape_34xx_erp_bug(device, request, irb, sense[3]);
        case 0x2c:
                /*
                 * Permanent equipment check. CU has tried recovery, but
                 * did not succeed.
                 */
                return tape_34xx_erp_failed(request, -EIO);
        case 0x2d:
                /* Data security erase failure. */
                if (request->op == TO_DSE)
                        return tape_34xx_erp_failed(request, -EIO);
                /* Data security erase failure, but no such command issued. */
                return tape_34xx_erp_bug(device, request, irb, sense[3]);
        case 0x2e:
                /*
                 * Not capable. This indicates either that the drive fails
                 * reading the format id mark or that that format specified
                 * is not supported by the drive.
                 */
                PRINT_WARN("Drive not capable processing the tape format!\n");
                return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
        case 0x30:
                /* The medium is write protected. */
                PRINT_WARN("Medium is write protected!\n");
                return tape_34xx_erp_failed(request, -EACCES);
        case 0x32:
                // Tension loss. We cannot recover this, it's an I/O error.
                PRINT_WARN("The drive lost tape tension.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x33:
                /*
                 * Load Failure. The cartridge was not inserted correctly or
                 * the tape is not threaded correctly.
                 */
                PRINT_WARN("Cartridge load failure. Reload the cartridge "
                           "and try again.\n");
                tape_34xx_delete_sbid_from(device, 0);
                return tape_34xx_erp_failed(request, -EIO);
        case 0x34:
                /*
                 * Unload failure. The drive cannot maintain tape tension
                 * and control tape movement during an unload operation.
                 */
                PRINT_WARN("Failure during cartridge unload. "
                           "Please try manually.\n");
                if (request->op == TO_RUN)
                        return tape_34xx_erp_failed(request, -EIO);
                return tape_34xx_erp_bug(device, request, irb, sense[3]);
        case 0x35:
                /*
                 * Drive equipment check. One of the following:
                 * - cu cannot recover from a drive detected error
                 * - a check code message is shown on drive display
                 * - the cartridge loader does not respond correctly
                 * - a failure occurs during an index, load, or unload cycle
                 */
                PRINT_WARN("Equipment check! Please check the drive and "
                           "the cartridge loader.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x36:
                if (device->cdev->id.driver_info == tape_3490)
                        /* End of data. */
                        return tape_34xx_erp_failed(request, -EIO);
                /* This erpa is reserved for 3480 */
                return tape_34xx_erp_bug(device, request, irb, sense[3]);
        case 0x37:
                /*
                 * Tape length error. The tape is shorter than reported in
                 * the beginning-of-tape data.
                 */
                PRINT_WARN("Tape length error.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x38:
                /*
                 * Physical end of tape. A read/write operation reached
                 * the physical end of tape.
                 */
                if (request->op==TO_WRI ||
                    request->op==TO_DSE ||
                    request->op==TO_WTM)
                        return tape_34xx_erp_failed(request, -ENOSPC);
                return tape_34xx_erp_failed(request, -EIO);
        case 0x39:
                /* Backward at Beginning of tape. */
                return tape_34xx_erp_failed(request, -EIO);
        case 0x3a:
                /* Drive switched to not ready. */
                PRINT_WARN("Drive not ready. Turn the ready/not ready switch "
                           "to ready position and try again.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x3b:
                /* Manual rewind or unload. This causes an I/O error. */
                PRINT_WARN("Medium was rewound or unloaded manually.\n");
                tape_34xx_delete_sbid_from(device, 0);
                return tape_34xx_erp_failed(request, -EIO);
        case 0x42:
                /*
                 * Degraded mode. A condition that can cause degraded
                 * performance is detected.
                 */
                PRINT_WARN("Subsystem is running in degraded mode.\n");
                return tape_34xx_erp_retry(request);
        case 0x43:
                /* Drive not ready. */
                tape_34xx_delete_sbid_from(device, 0);
                tape_med_state_set(device, MS_UNLOADED);
                /* Some commands commands are successful even in this case */
                if (sense[1] & SENSE_DRIVE_ONLINE) {
                        switch(request->op) {
                                case TO_ASSIGN:
                                case TO_UNASSIGN:
                                case TO_DIS:
                                case TO_NOP:
                                        return tape_34xx_done(request);
                                        break;
                                default:
                                        break;
                        }
                }
                PRINT_WARN("The drive is not ready.\n");
                return tape_34xx_erp_failed(request, -ENOMEDIUM);
        case 0x44:
                /* Locate Block unsuccessful. */
                if (request->op != TO_BLOCK && request->op != TO_LBL)
                        /* No locate block was issued. */
                        return tape_34xx_erp_bug(device, request,
                                                 irb, sense[3]);
                return tape_34xx_erp_failed(request, -EIO);
        case 0x45:
                /* The drive is assigned to a different channel path. */
                PRINT_WARN("The drive is assigned elsewhere.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x46:
                /*
                 * Drive not on-line. Drive may be switched offline,
                 * the power supply may be switched off or
                 * the drive address may not be set correctly.
                 */
                PRINT_WARN("The drive is not on-line.");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x47:
                /* Volume fenced. CU reports volume integrity is lost. */
                PRINT_WARN("Volume fenced. The volume integrity is lost.\n");
                tape_34xx_delete_sbid_from(device, 0);
                return tape_34xx_erp_failed(request, -EIO);
        case 0x48:
                /* Log sense data and retry request. */
                return tape_34xx_erp_retry(request);
        case 0x49:
                /* Bus out check. A parity check error on the bus was found. */
                PRINT_WARN("Bus out check. A data transfer over the bus "
                           "has been corrupted.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x4a:
                /* Control unit erp failed. */
                PRINT_WARN("The control unit I/O error recovery failed.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x4b:
                /*
                 * CU and drive incompatible. The drive requests micro-program
                 * patches, which are not available on the CU.
                 */
                PRINT_WARN("The drive needs microprogram patches from the "
                           "control unit, which are not available.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x4c:
                /*
                 * Recovered Check-One failure. Cu develops a hardware error,
                 * but is able to recover.
                 */
                return tape_34xx_erp_retry(request);
        case 0x4d:
                if (device->cdev->id.driver_info == tape_3490)
                        /*
                         * Resetting event received. Since the driver does
                         * not support resetting event recovery (which has to
                         * be handled by the I/O Layer), retry our command.
                         */
                        return tape_34xx_erp_retry(request);
                /* This erpa is reserved for 3480. */
                return tape_34xx_erp_bug(device, request, irb, sense[3]);
        case 0x4e:
                if (device->cdev->id.driver_info == tape_3490) {
                        /*
                         * Maximum block size exceeded. This indicates, that
                         * the block to be written is larger than allowed for
                         * buffered mode.
                         */
                        PRINT_WARN("Maximum block size for buffered "
                                   "mode exceeded.\n");
                        return tape_34xx_erp_failed(request, -ENOBUFS);
                }
                /* This erpa is reserved for 3480. */
                return tape_34xx_erp_bug(device, request, irb, sense[3]);
        case 0x50:
                /*
                 * Read buffered log (Overflow). CU is running in extended
                 * buffered log mode, and a counter overflows. This should
                 * never happen, since we're never running in extended
                 * buffered log mode.
                 */
                return tape_34xx_erp_retry(request);
        case 0x51:
                /*
                 * Read buffered log (EOV). EOF processing occurs while the
                 * CU is in extended buffered log mode. This should never
                 * happen, since we're never running in extended buffered
                 * log mode.
                 */
                return tape_34xx_erp_retry(request);
        case 0x52:
                /* End of Volume complete. Rewind unload completed ok. */
                if (request->op == TO_RUN) {
                        tape_med_state_set(device, MS_UNLOADED);
                        tape_34xx_delete_sbid_from(device, 0);
                        return tape_34xx_erp_succeeded(request);
                }
                return tape_34xx_erp_bug(device, request, irb, sense[3]);
        case 0x53:
                /* Global command intercept. */
                return tape_34xx_erp_retry(request);
        case 0x54:
                /* Channel interface recovery (temporary). */
                return tape_34xx_erp_retry(request);
        case 0x55:
                /* Channel interface recovery (permanent). */
                PRINT_WARN("A permanent channel interface error occurred.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x56:
                /* Channel protocol error. */
                PRINT_WARN("A channel protocol error occurred.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x57:
                if (device->cdev->id.driver_info == tape_3480) {
                        /* Attention intercept. */
                        PRINT_WARN("An attention intercept occurred, "
                                   "which will be recovered.\n");
                        return tape_34xx_erp_retry(request);
                } else {
                        /* Global status intercept. */
                        PRINT_WARN("An global status intercept was received, "
                                   "which will be recovered.\n");
                        return tape_34xx_erp_retry(request);
                }
        case 0x5a:
                /*
                 * Tape length incompatible. The tape inserted is too long,
                 * which could cause damage to the tape or the drive.
                 */
                PRINT_WARN("Tape Length Incompatible\n");
                PRINT_WARN("Tape length exceeds IBM enhanced capacity "
                        "cartdridge length or a medium\n");
                PRINT_WARN("with EC-CST identification mark has been mounted "
                        "in a device that writes\n");
                PRINT_WARN("3480 or 3480 XF format.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x5b:
                /* Format 3480 XF incompatible */
                if (sense[1] & SENSE_BEGINNING_OF_TAPE)
                        /* The tape will get overwritten. */
                        return tape_34xx_erp_retry(request);
                PRINT_WARN("Format 3480 XF Incompatible\n");
                PRINT_WARN("Medium has been created in 3480 format. "
                        "To change the format writes\n");
                PRINT_WARN("must be issued at BOT.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x5c:
                /* Format 3480-2 XF incompatible */
                PRINT_WARN("Format 3480-2 XF Incompatible\n");
                PRINT_WARN("Device can only read 3480 or 3480 XF format.\n");
                return tape_34xx_erp_failed(request, -EIO);
        case 0x5d:
                /* Tape length violation. */
                PRINT_WARN("Tape Length Violation\n");
                PRINT_WARN("The mounted tape exceeds IBM Enhanced Capacity "
                        "Cartdridge System Tape length.\n");
                PRINT_WARN("This may cause damage to the drive or tape when "
                        "processing to the EOV\n");
                return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
        case 0x5e:
                /* Compaction algorithm incompatible. */
                PRINT_WARN("Compaction Algorithm Incompatible\n");
                PRINT_WARN("The volume is recorded using an incompatible "
                        "compaction algorithm,\n");
                PRINT_WARN("which is not supported by the device.\n");
                return tape_34xx_erp_failed(request, -EMEDIUMTYPE);

                /* The following erpas should have been covered earlier. */
        case 0x23: /* Read data check. */
        case 0x25: /* Write data check. */
        case 0x26: /* Data check (read opposite). */
        case 0x28: /* Write id mark check. */
        case 0x31: /* Tape void. */
        case 0x40: /* Overrun error. */
        case 0x41: /* Record sequence error. */
                /* All other erpas are reserved for future use. */
        default:
                return tape_34xx_erp_bug(device, request, irb, sense[3]);
        }
}

/*
 * 3480/3490 interrupt handler
 */
static int
tape_34xx_irq(struct tape_device *device, struct tape_request *request,
              struct irb *irb)
{
        if (request == NULL)
                return tape_34xx_unsolicited_irq(device, irb);

        if ((irb->scsw.dstat & DEV_STAT_UNIT_EXCEP) &&
            (irb->scsw.dstat & DEV_STAT_DEV_END) &&
            (request->op == TO_WRI)) {
                /* Write at end of volume */
                PRINT_INFO("End of volume\n"); /* XXX */
                return tape_34xx_erp_failed(request, -ENOSPC);
        }

        if (irb->scsw.dstat & DEV_STAT_UNIT_CHECK)
                return tape_34xx_unit_check(device, request, irb);

        if (irb->scsw.dstat & DEV_STAT_DEV_END) {
                /*
                 * A unit exception occurs on skipping over a tapemark block.
                 */
                if (irb->scsw.dstat & DEV_STAT_UNIT_EXCEP) {
                        if (request->op == TO_BSB || request->op == TO_FSB)
                                request->rescnt++;
                        else
                                DBF_EVENT(5, "Unit Exception!\n");
                }
                return tape_34xx_done(request);
        }

        DBF_EVENT(6, "xunknownirq\n");
        PRINT_ERR("Unexpected interrupt.\n");
        PRINT_ERR("Current op is: %s", tape_op_verbose[request->op]);
        tape_dump_sense(device, request, irb);
        return TAPE_IO_STOP;
}

/*
 * ioctl_overload
 */
static int
tape_34xx_ioctl(struct tape_device *device, unsigned int cmd, unsigned long arg)
{
        if (cmd == TAPE390_DISPLAY) {
                struct display_struct disp;

                if (copy_from_user(&disp, (char __user *) arg, sizeof(disp)) != 0)
                        return -EFAULT;

                return tape_std_display(device, &disp);
        } else
                return -EINVAL;
}

static inline void
tape_34xx_append_new_sbid(struct tape_34xx_block_id bid, struct list_head *l)
{
        struct tape_34xx_sbid * new_sbid;

        new_sbid = kmalloc(sizeof(*new_sbid), GFP_ATOMIC);
        if (!new_sbid)
                return;

        new_sbid->bid = bid;
        list_add(&new_sbid->list, l);
}

/*
 * Build up the search block ID list. The block ID consists of a logical
 * block number and a hardware specific part. The hardware specific part
 * helps the tape drive to speed up searching for a specific block.
 */
static void
tape_34xx_add_sbid(struct tape_device *device, struct tape_34xx_block_id bid)
{
        struct list_head *      sbid_list;
        struct tape_34xx_sbid * sbid;
        struct list_head *      l;

        /*
         * immediately return if there is no list at all or the block to add
         * is located in segment 1 of wrap 0 because this position is used
         * if no hardware position data is supplied.
         */
        sbid_list = (struct list_head *) device->discdata;
        if (!sbid_list || (bid.segment < 2 && bid.wrap == 0))
                return;

        /*
         * Search the position where to insert the new entry. Hardware
         * acceleration uses only the segment and wrap number. So we
         * need only one entry for a specific wrap/segment combination.
         * If there is a block with a lower number but the same hard-
         * ware position data we just update the block number in the
         * existing entry.
         */
        list_for_each(l, sbid_list) {
                sbid = list_entry(l, struct tape_34xx_sbid, list);

                if (
                        (sbid->bid.segment == bid.segment) &&
                        (sbid->bid.wrap    == bid.wrap)
                ) {
                        if (bid.block < sbid->bid.block)
                                sbid->bid = bid;
                        else return;
                        break;
                }

                /* Sort in according to logical block number. */
                if (bid.block < sbid->bid.block) {
                        tape_34xx_append_new_sbid(bid, l->prev);
                        break;
                }
        }
        /* List empty or new block bigger than last entry. */
        if (l == sbid_list)
                tape_34xx_append_new_sbid(bid, l->prev);

        DBF_LH(4, "Current list is:\n");
        list_for_each(l, sbid_list) {
                sbid = list_entry(l, struct tape_34xx_sbid, list);
                DBF_LH(4, "%d:%03d@%05d\n",
                        sbid->bid.wrap,
                        sbid->bid.segment,
                        sbid->bid.block
                );
        }
}

/*
 * Delete all entries from the search block ID list that belong to tape blocks
 * equal or higher than the given number.
 */
static void
tape_34xx_delete_sbid_from(struct tape_device *device, int from)
{
        struct list_head *      sbid_list;
        struct tape_34xx_sbid * sbid;
        struct list_head *      l;
        struct list_head *      n;

        sbid_list = (struct list_head *) device->discdata;
        if (!sbid_list)
                return;

        list_for_each_safe(l, n, sbid_list) {
                sbid = list_entry(l, struct tape_34xx_sbid, list);
                if (sbid->bid.block >= from) {
                        DBF_LH(4, "Delete sbid %d:%03d@%05d\n",
                                sbid->bid.wrap,
                                sbid->bid.segment,
                                sbid->bid.block
                        );
                        list_del(l);
                        kfree(sbid);
                }
        }
}

/*
 * Merge hardware position data into a block id.
 */
static void
tape_34xx_merge_sbid(
        struct tape_device *            device,
        struct tape_34xx_block_id *     bid
) {
        struct tape_34xx_sbid * sbid;
        struct tape_34xx_sbid * sbid_to_use;
        struct list_head *      sbid_list;
        struct list_head *      l;

        sbid_list = (struct list_head *) device->discdata;
        bid->wrap    = 0;
        bid->segment = 1;

        if (!sbid_list || list_empty(sbid_list))
                return;

        sbid_to_use = NULL;
        list_for_each(l, sbid_list) {
                sbid = list_entry(l, struct tape_34xx_sbid, list);

                if (sbid->bid.block >= bid->block)
                        break;
                sbid_to_use = sbid;
        }
        if (sbid_to_use) {
                bid->wrap    = sbid_to_use->bid.wrap;
                bid->segment = sbid_to_use->bid.segment;
                DBF_LH(4, "Use %d:%03d@%05d for %05d\n",
                        sbid_to_use->bid.wrap,
                        sbid_to_use->bid.segment,
                        sbid_to_use->bid.block,
                        bid->block
                );
        }
}

static int
tape_34xx_setup_device(struct tape_device * device)
{
        int                     rc;
        struct list_head *      discdata;

        DBF_EVENT(6, "34xx device setup\n");
        if ((rc = tape_std_assign(device)) == 0) {
                if ((rc = tape_34xx_medium_sense(device)) != 0) {
                        DBF_LH(3, "34xx medium sense returned %d\n", rc);
                }
        }
        discdata = kmalloc(sizeof(struct list_head), GFP_KERNEL);
        if (discdata) {
                        INIT_LIST_HEAD(discdata);
                        device->discdata = discdata;
        }

        return rc;
}

static void
tape_34xx_cleanup_device(struct tape_device *device)
{
        tape_std_unassign(device);
        
        if (device->discdata) {
                tape_34xx_delete_sbid_from(device, 0);
                kfree(device->discdata);
                device->discdata = NULL;
        }
}


/*
 * MTTELL: Tell block. Return the number of block relative to current file.
 */
static int
tape_34xx_mttell(struct tape_device *device, int mt_count)
{
        struct {
                struct tape_34xx_block_id       cbid;
                struct tape_34xx_block_id       dbid;
        } __attribute__ ((packed)) block_id;
        int rc;

        rc = tape_std_read_block_id(device, (__u64 *) &block_id);
        if (rc)
                return rc;

        tape_34xx_add_sbid(device, block_id.cbid);
        return block_id.cbid.block;
}

/*
 * MTSEEK: seek to the specified block.
 */
static int
tape_34xx_mtseek(struct tape_device *device, int mt_count)
{
        struct tape_request *request;
        struct tape_34xx_block_id *     bid;

        if (mt_count > 0x3fffff) {
                DBF_EXCEPTION(6, "xsee parm\n");
                return -EINVAL;
        }
        request = tape_alloc_request(3, 4);
        if (IS_ERR(request))
                return PTR_ERR(request);

        /* setup ccws */
        request->op = TO_LBL;
        bid         = (struct tape_34xx_block_id *) request->cpdata;
        bid->format = (*device->modeset_byte & 0x08) ?
                        TAPE34XX_FMT_3480_XF : TAPE34XX_FMT_3480;
        bid->block  = mt_count;
        tape_34xx_merge_sbid(device, bid);

        tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
        tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata);
        tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL);

        /* execute it */
        return tape_do_io_free(device, request);
}

#ifdef CONFIG_S390_TAPE_BLOCK
/*
 * Tape block read for 34xx.
 */
static struct tape_request *
tape_34xx_bread(struct tape_device *device, struct request *req)
{
        struct tape_request *request;
        struct ccw1 *ccw;
        int count = 0, i;
        unsigned off;
        char *dst;
        struct bio_vec *bv;
        struct bio *bio;
        struct tape_34xx_block_id *     start_block;

        DBF_EVENT(6, "xBREDid:");

        /* Count the number of blocks for the request. */
        rq_for_each_bio(bio, req) {
                bio_for_each_segment(bv, bio, i) {
                        count += bv->bv_len >> (TAPEBLOCK_HSEC_S2B + 9);
                }
        }

        /* Allocate the ccw request. */
        request = tape_alloc_request(3+count+1, 8);
        if (IS_ERR(request))
                return request;

        /* Setup ccws. */
        request->op = TO_BLOCK;
        start_block = (struct tape_34xx_block_id *) request->cpdata;
        start_block->block = req->sector >> TAPEBLOCK_HSEC_S2B;
        DBF_EVENT(6, "start_block = %i\n", start_block->block);

        ccw = request->cpaddr;
        ccw = tape_ccw_cc(ccw, MODE_SET_DB, 1, device->modeset_byte);

        /*
         * We always setup a nop after the mode set ccw. This slot is
         * used in tape_std_check_locate to insert a locate ccw if the
         * current tape position doesn't match the start block to be read.
         * The second nop will be filled with a read block id which is in
         * turn used by tape_34xx_free_bread to populate the segment bid
         * table.
         */
        ccw = tape_ccw_cc(ccw, NOP, 0, NULL);
        ccw = tape_ccw_cc(ccw, NOP, 0, NULL);

        rq_for_each_bio(bio, req) {
                bio_for_each_segment(bv, bio, i) {
                        dst = kmap(bv->bv_page) + bv->bv_offset;
                        for (off = 0; off < bv->bv_len;
                             off += TAPEBLOCK_HSEC_SIZE) {
                                ccw->flags = CCW_FLAG_CC;
                                ccw->cmd_code = READ_FORWARD;
                                ccw->count = TAPEBLOCK_HSEC_SIZE;
                                set_normalized_cda(ccw, (void*) __pa(dst));
                                ccw++;
                                dst += TAPEBLOCK_HSEC_SIZE;
                        }
                }
        }

        ccw = tape_ccw_end(ccw, NOP, 0, NULL);
        DBF_EVENT(6, "xBREDccwg\n");
        return request;
}

static void
tape_34xx_free_bread (struct tape_request *request)
{
        struct ccw1* ccw;

        ccw = request->cpaddr;
        if ((ccw + 2)->cmd_code == READ_BLOCK_ID) {
                struct {
                        struct tape_34xx_block_id       cbid;
                        struct tape_34xx_block_id       dbid;
                } __attribute__ ((packed)) *rbi_data;

                rbi_data = request->cpdata;

                if (request->device)
                        tape_34xx_add_sbid(request->device, rbi_data->cbid);
        }

        /* Last ccw is a nop and doesn't need clear_normalized_cda */
        for (; ccw->flags & CCW_FLAG_CC; ccw++)
                if (ccw->cmd_code == READ_FORWARD)
                        clear_normalized_cda(ccw);
        tape_free_request(request);
}

/*
 * check_locate is called just before the tape request is passed to
 * the common io layer for execution. It has to check the current
 * tape position and insert a locate ccw if it doesn't match the
 * start block for the request.
 */
static void
tape_34xx_check_locate(struct tape_device *device, struct tape_request *request)
{
        struct tape_34xx_block_id *     start_block;

        start_block = (struct tape_34xx_block_id *) request->cpdata;
        if (start_block->block == device->blk_data.block_position)
                return;

        DBF_LH(4, "Block seek(%06d+%06d)\n", start_block->block, device->bof);
        start_block->wrap    = 0;
        start_block->segment = 1;
        start_block->format  = (*device->modeset_byte & 0x08) ?
                                TAPE34XX_FMT_3480_XF :
                                TAPE34XX_FMT_3480;
        start_block->block   = start_block->block + device->bof;
        tape_34xx_merge_sbid(device, start_block);
        tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata);
        tape_ccw_cc(request->cpaddr + 2, READ_BLOCK_ID, 8, request->cpdata);
}
#endif

/*
 * List of 3480/3490 magnetic tape commands.
 */
static tape_mtop_fn tape_34xx_mtop[TAPE_NR_MTOPS] = {
        [MTRESET]        = tape_std_mtreset,
        [MTFSF]          = tape_std_mtfsf,
        [MTBSF]          = tape_std_mtbsf,
        [MTFSR]          = tape_std_mtfsr,
        [MTBSR]          = tape_std_mtbsr,
        [MTWEOF]         = tape_std_mtweof,
        [MTREW]          = tape_std_mtrew,
        [MTOFFL]         = tape_std_mtoffl,
        [MTNOP]          = tape_std_mtnop,
        [MTRETEN]        = tape_std_mtreten,
        [MTBSFM]         = tape_std_mtbsfm,
        [MTFSFM]         = tape_std_mtfsfm,
        [MTEOM]          = tape_std_mteom,
        [MTERASE]        = tape_std_mterase,
        [MTRAS1]         = NULL,
        [MTRAS2]         = NULL,
        [MTRAS3]         = NULL,
        [MTSETBLK]       = tape_std_mtsetblk,
        [MTSETDENSITY]   = NULL,
        [MTSEEK]         = tape_34xx_mtseek,
        [MTTELL]         = tape_34xx_mttell,
        [MTSETDRVBUFFER] = NULL,
        [MTFSS]          = NULL,
        [MTBSS]          = NULL,
        [MTWSM]          = NULL,
        [MTLOCK]         = NULL,
        [MTUNLOCK]       = NULL,
        [MTLOAD]         = tape_std_mtload,
        [MTUNLOAD]       = tape_std_mtunload,
        [MTCOMPRESSION]  = tape_std_mtcompression,
        [MTSETPART]      = NULL,
        [MTMKPART]       = NULL
};

/*
 * Tape discipline structure for 3480 and 3490.
 */
static struct tape_discipline tape_discipline_34xx = {
        .owner = THIS_MODULE,
        .setup_device = tape_34xx_setup_device,
        .cleanup_device = tape_34xx_cleanup_device,
        .process_eov = tape_std_process_eov,
        .irq = tape_34xx_irq,
        .read_block = tape_std_read_block,
        .write_block = tape_std_write_block,
#ifdef CONFIG_S390_TAPE_BLOCK
        .bread = tape_34xx_bread,
        .free_bread = tape_34xx_free_bread,
        .check_locate = tape_34xx_check_locate,
#endif
        .ioctl_fn = tape_34xx_ioctl,
        .mtop_array = tape_34xx_mtop
};

static struct ccw_device_id tape_34xx_ids[] = {
        { CCW_DEVICE_DEVTYPE(0x3480, 0, 0x3480, 0), driver_info: tape_3480},
        { CCW_DEVICE_DEVTYPE(0x3490, 0, 0x3490, 0), driver_info: tape_3490},
        { /* end of list */ }
};

static int
tape_34xx_online(struct ccw_device *cdev)
{
        return tape_generic_online(
                cdev->dev.driver_data,
                &tape_discipline_34xx
        );
}

static int
tape_34xx_offline(struct ccw_device *cdev)
{
        return tape_generic_offline(cdev->dev.driver_data);
}

static struct ccw_driver tape_34xx_driver = {
        .name = "tape_34xx",
        .owner = THIS_MODULE,
        .ids = tape_34xx_ids,
        .probe = tape_generic_probe,
        .remove = tape_generic_remove,
        .set_online = tape_34xx_online,
        .set_offline = tape_34xx_offline,
};

static int
tape_34xx_init (void)
{
        int rc;

        TAPE_DBF_AREA = debug_register ( "tape_34xx", 2, 2, 4*sizeof(long));
        debug_register_view(TAPE_DBF_AREA, &debug_sprintf_view);
#ifdef DBF_LIKE_HELL
        debug_set_level(TAPE_DBF_AREA, 6);
#endif

        DBF_EVENT(3, "34xx init: $Revision: 1.23 $\n");
        /* Register driver for 3480/3490 tapes. */
        rc = ccw_driver_register(&tape_34xx_driver);
        if (rc)
                DBF_EVENT(3, "34xx init failed\n");
        else
                DBF_EVENT(3, "34xx registered\n");
        return rc;
}

static void
tape_34xx_exit(void)
{
        ccw_driver_unregister(&tape_34xx_driver);

        debug_unregister(TAPE_DBF_AREA);
}

MODULE_DEVICE_TABLE(ccw, tape_34xx_ids);
MODULE_AUTHOR("(C) 2001-2002 IBM Deutschland Entwicklung GmbH");
MODULE_DESCRIPTION("Linux on zSeries channel attached 3480 tape "
                   "device driver ($Revision: 1.23 $)");
MODULE_LICENSE("GPL");

module_init(tape_34xx_init);
module_exit(tape_34xx_exit);