2 * linux/drivers/s390/cio/cmf.c ($Revision: 1.16 $)
4 * Linux on zSeries Channel Measurement Facility support
6 * Copyright 2000,2003 IBM Corporation
8 * Author: Arnd Bergmann <arndb@de.ibm.com>
10 * original idea from Natarajan Krishnaswami <nkrishna@us.ibm.com>
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
27 #include <linux/bootmem.h>
28 #include <linux/device.h>
29 #include <linux/init.h>
30 #include <linux/list.h>
31 #include <linux/module.h>
32 #include <linux/moduleparam.h>
34 #include <asm/ccwdev.h>
44 /* parameter to enable cmf during boot, possible uses are:
45 * "s390cmf" -- enable cmf and allocate 2 MB of ram so measuring can be
46 * used on any subchannel
47 * "s390cmf=<num>" -- enable cmf and allocate enough memory to measure
48 * <num> subchannel, where <num> is an integer
49 * between 1 and 65535, default is 1024
51 #define ARGSTRING "s390cmf"
53 /* indices for READCMB */
55 /* basic and exended format: */
58 cmb_device_connect_time
,
59 cmb_function_pending_time
,
60 cmb_device_disconnect_time
,
61 cmb_control_unit_queuing_time
,
62 cmb_device_active_only_time
,
63 /* extended format only: */
65 cmb_initial_command_response_time
,
69 * enum cmb_format - types of supported measurement block formats
71 * @CMF_BASIC: traditional channel measurement blocks supported
72 * by all machines that we run on
73 * @CMF_EXTENDED: improved format that was introduced with the z990
75 * @CMF_AUTODETECT: default: use extended format when running on a z990
76 * or later machine, otherwise fall back to basic format
84 * format - actual format for all measurement blocks
86 * The format module parameter can be set to a value of 0 (zero)
87 * or 1, indicating basic or extended format as described for
90 static int format
= CMF_AUTODETECT
;
91 module_param(format
, bool, 0444);
94 * struct cmb_operations - functions to use depending on cmb_format
96 * all these functions operate on a struct cmf_device. There is only
97 * one instance of struct cmb_operations because all cmf_device
98 * objects are guaranteed to be of the same type.
100 * @alloc: allocate memory for a channel measurement block,
101 * either with the help of a special pool or with kmalloc
102 * @free: free memory allocated with @alloc
103 * @set: enable or disable measurement
104 * @readall: read a measurement block in a common format
105 * @reset: clear the data in the associated measurement block and
106 * reset its time stamp
108 struct cmb_operations
{
109 int (*alloc
) (struct ccw_device
*);
110 void(*free
) (struct ccw_device
*);
111 int (*set
) (struct ccw_device
*, u32
);
112 u64 (*read
) (struct ccw_device
*, int);
113 int (*readall
)(struct ccw_device
*, struct cmbdata
*);
114 void (*reset
) (struct ccw_device
*);
116 struct attribute_group
*attr_group
;
118 static struct cmb_operations
*cmbops
;
120 /* our user interface is designed in terms of nanoseconds,
121 * while the hardware measures total times in its own
123 static inline u64
time_to_nsec(u32 value
)
125 return ((u64
)value
) * 128000ull;
129 * Users are usually interested in average times,
130 * not accumulated time.
131 * This also helps us with atomicity problems
132 * when reading sinlge values.
134 static inline u64
time_to_avg_nsec(u32 value
, u32 count
)
138 /* no samples yet, avoid division by 0 */
142 /* value comes in units of 128 µsec */
143 ret
= time_to_nsec(value
);
149 /* activate or deactivate the channel monitor. When area is NULL,
150 * the monitor is deactivated. The channel monitor needs to
151 * be active in order to measure subchannels, which also need
154 cmf_activate(void *area
, unsigned int onoff
)
156 register void * __gpr2
asm("2");
157 register long __gpr1
asm("1");
160 __gpr1
= onoff
? 2 : 0;
161 /* activate channel measurement */
162 asm("schm" : : "d" (__gpr2
), "d" (__gpr1
) );
166 set_schib(struct ccw_device
*cdev
, u32 mme
, int mbfc
, unsigned long address
)
170 struct subchannel
*sch
;
173 sch
= to_subchannel(cdev
->dev
.parent
);
175 /* msch can silently fail, so do it again if necessary */
176 for (retry
= 0; retry
< 3; retry
++) {
178 stsch(sch
->irq
, schib
);
179 schib
->pmcw
.mme
= mme
;
180 schib
->pmcw
.mbfc
= mbfc
;
181 /* address can be either a block address or a block index */
183 schib
->mba
= address
;
185 schib
->pmcw
.mbi
= address
;
187 /* try to submit it */
188 switch(ret
= msch_err(sch
->irq
, schib
)) {
192 case 2: /* in I/O or status pending */
195 case 3: /* subchannel is no longer valid */
198 default: /* msch caught an exception */
202 stsch(sch
->irq
, schib
); /* restore the schib */
207 /* check if it worked */
208 if (schib
->pmcw
.mme
== mme
&&
209 schib
->pmcw
.mbfc
== mbfc
&&
210 (mbfc
? (schib
->mba
== address
)
211 : (schib
->pmcw
.mbi
== address
)))
220 struct set_schib_struct
{
223 unsigned long address
;
224 wait_queue_head_t wait
;
228 static int set_schib_wait(struct ccw_device
*cdev
, u32 mme
,
229 int mbfc
, unsigned long address
)
231 struct set_schib_struct s
= {
235 .wait
= __WAIT_QUEUE_HEAD_INITIALIZER(s
.wait
),
238 spin_lock_irq(cdev
->ccwlock
);
239 s
.ret
= set_schib(cdev
, mme
, mbfc
, address
);
240 if (s
.ret
!= -EBUSY
) {
244 if (cdev
->private->state
!= DEV_STATE_ONLINE
) {
246 /* if the device is not online, don't even try again */
249 cdev
->private->state
= DEV_STATE_CMFCHANGE
;
250 cdev
->private->cmb_wait
= &s
;
253 spin_unlock_irq(cdev
->ccwlock
);
254 if (wait_event_interruptible(s
.wait
, s
.ret
!= 1)) {
255 spin_lock_irq(cdev
->ccwlock
);
257 s
.ret
= -ERESTARTSYS
;
258 cdev
->private->cmb_wait
= 0;
259 if (cdev
->private->state
== DEV_STATE_CMFCHANGE
)
260 cdev
->private->state
= DEV_STATE_ONLINE
;
262 spin_unlock_irq(cdev
->ccwlock
);
267 spin_unlock_irq(cdev
->ccwlock
);
271 void retry_set_schib(struct ccw_device
*cdev
)
273 struct set_schib_struct
*s
;
275 s
= cdev
->private->cmb_wait
;
276 cdev
->private->cmb_wait
= 0;
281 s
->ret
= set_schib(cdev
, s
->mme
, s
->mbfc
, s
->address
);
286 * struct cmb_area - container for global cmb data
288 * @mem: pointer to CMBs (only in basic measurement mode)
289 * @list: contains a linked list of all subchannels
290 * @lock: protect concurrent access to @mem and @list
294 struct list_head list
;
299 static struct cmb_area cmb_area
= {
300 .lock
= SPIN_LOCK_UNLOCKED
,
301 .list
= LIST_HEAD_INIT(cmb_area
.list
),
302 .num_channels
= 1024,
306 /* ****** old style CMB handling ********/
310 * Basic channel measurement blocks are allocated in one contiguous
311 * block of memory, which can not be moved as long as any channel
312 * is active. Therefore, a maximum number of subchannels needs to
313 * be defined somewhere. This is a module parameter, defaulting to
314 * a resonable value of 1024, or 32 kb of memory.
315 * Current kernels don't allow kmalloc with more than 128kb, so the
319 module_param_named(maxchannels
, cmb_area
.num_channels
, uint
, 0444);
322 * struct cmb - basic channel measurement block
324 * cmb as used by the hardware the fields are described in z/Architecture
325 * Principles of Operation, chapter 17.
326 * The area to be a contiguous array and may not be reallocated or freed.
327 * Only one cmb area can be present in the system.
332 u32 device_connect_time
;
333 u32 function_pending_time
;
334 u32 device_disconnect_time
;
335 u32 control_unit_queuing_time
;
336 u32 device_active_only_time
;
340 /* insert a single device into the cmb_area list
341 * called with cmb_area.lock held from alloc_cmb
344 alloc_cmb_single (struct ccw_device
*cdev
)
347 struct ccw_device_private
*node
;
350 spin_lock_irq(cdev
->ccwlock
);
351 if (!list_empty(&cdev
->private->cmb_list
)) {
356 /* find first unused cmb in cmb_area.mem.
357 * this is a little tricky: cmb_area.list
358 * remains sorted by ->cmb pointers */
360 list_for_each_entry(node
, &cmb_area
.list
, cmb_list
) {
361 if ((struct cmb
*)node
->cmb
> cmb
)
365 if (cmb
- cmb_area
.mem
>= cmb_area
.num_channels
) {
371 list_add_tail(&cdev
->private->cmb_list
, &node
->cmb_list
);
372 cdev
->private->cmb
= cmb
;
375 spin_unlock_irq(cdev
->ccwlock
);
380 alloc_cmb (struct ccw_device
*cdev
)
386 spin_lock(&cmb_area
.lock
);
389 /* there is no user yet, so we need a new area */
390 size
= sizeof(struct cmb
) * cmb_area
.num_channels
;
391 WARN_ON(!list_empty(&cmb_area
.list
));
393 spin_unlock(&cmb_area
.lock
);
394 mem
= (void*)__get_free_pages(GFP_KERNEL
| GFP_DMA
,
396 spin_lock(&cmb_area
.lock
);
399 /* ok, another thread was faster */
400 free_pages((unsigned long)mem
, get_order(size
));
407 memset(mem
, 0, size
);
409 cmf_activate(cmb_area
.mem
, 1);
413 /* do the actual allocation */
414 ret
= alloc_cmb_single(cdev
);
416 spin_unlock(&cmb_area
.lock
);
422 free_cmb(struct ccw_device
*cdev
)
424 struct ccw_device_private
*priv
;
426 priv
= cdev
->private;
428 spin_lock(&cmb_area
.lock
);
429 spin_lock_irq(cdev
->ccwlock
);
431 if (list_empty(&priv
->cmb_list
)) {
437 list_del_init(&priv
->cmb_list
);
439 if (list_empty(&cmb_area
.list
)) {
441 size
= sizeof(struct cmb
) * cmb_area
.num_channels
;
442 cmf_activate(NULL
, 0);
443 free_pages((unsigned long)cmb_area
.mem
, get_order(size
));
447 spin_unlock_irq(cdev
->ccwlock
);
448 spin_unlock(&cmb_area
.lock
);
452 set_cmb(struct ccw_device
*cdev
, u32 mme
)
456 if (!cdev
->private->cmb
)
459 offset
= mme
? (struct cmb
*)cdev
->private->cmb
- cmb_area
.mem
: 0;
461 return set_schib_wait(cdev
, mme
, 0, offset
);
465 read_cmb (struct ccw_device
*cdev
, int index
)
467 /* yes, we have to put it on the stack
468 * because the cmb must only be accessed
469 * atomically, e.g. with mvc */
474 spin_lock_irqsave(cdev
->ccwlock
, flags
);
475 if (!cdev
->private->cmb
) {
476 spin_unlock_irqrestore(cdev
->ccwlock
, flags
);
480 cmb
= *(struct cmb
*)cdev
->private->cmb
;
481 spin_unlock_irqrestore(cdev
->ccwlock
, flags
);
484 case cmb_ssch_rsch_count
:
485 return cmb
.ssch_rsch_count
;
486 case cmb_sample_count
:
487 return cmb
.sample_count
;
488 case cmb_device_connect_time
:
489 val
= cmb
.device_connect_time
;
491 case cmb_function_pending_time
:
492 val
= cmb
.function_pending_time
;
494 case cmb_device_disconnect_time
:
495 val
= cmb
.device_disconnect_time
;
497 case cmb_control_unit_queuing_time
:
498 val
= cmb
.control_unit_queuing_time
;
500 case cmb_device_active_only_time
:
501 val
= cmb
.device_active_only_time
;
506 return time_to_avg_nsec(val
, cmb
.sample_count
);
510 readall_cmb (struct ccw_device
*cdev
, struct cmbdata
*data
)
512 /* yes, we have to put it on the stack
513 * because the cmb must only be accessed
514 * atomically, e.g. with mvc */
519 spin_lock_irqsave(cdev
->ccwlock
, flags
);
520 if (!cdev
->private->cmb
) {
521 spin_unlock_irqrestore(cdev
->ccwlock
, flags
);
525 cmb
= *(struct cmb
*)cdev
->private->cmb
;
526 time
= get_clock() - cdev
->private->cmb_start_time
;
527 spin_unlock_irqrestore(cdev
->ccwlock
, flags
);
529 memset(data
, 0, sizeof(struct cmbdata
));
531 /* we only know values before device_busy_time */
532 data
->size
= offsetof(struct cmbdata
, device_busy_time
);
534 /* convert to nanoseconds */
535 data
->elapsed_time
= (time
* 1000) >> 12;
537 /* copy data to new structure */
538 data
->ssch_rsch_count
= cmb
.ssch_rsch_count
;
539 data
->sample_count
= cmb
.sample_count
;
541 /* time fields are converted to nanoseconds while copying */
542 data
->device_connect_time
= time_to_nsec(cmb
.device_connect_time
);
543 data
->function_pending_time
= time_to_nsec(cmb
.function_pending_time
);
544 data
->device_disconnect_time
= time_to_nsec(cmb
.device_disconnect_time
);
545 data
->control_unit_queuing_time
546 = time_to_nsec(cmb
.control_unit_queuing_time
);
547 data
->device_active_only_time
548 = time_to_nsec(cmb
.device_active_only_time
);
554 reset_cmb(struct ccw_device
*cdev
)
557 spin_lock_irq(cdev
->ccwlock
);
558 cmb
= cdev
->private->cmb
;
560 memset (cmb
, 0, sizeof (*cmb
));
561 cdev
->private->cmb_start_time
= get_clock();
562 spin_unlock_irq(cdev
->ccwlock
);
565 static struct attribute_group cmf_attr_group
;
567 static struct cmb_operations cmbops_basic
= {
572 .readall
= readall_cmb
,
574 .attr_group
= &cmf_attr_group
,
577 /* ******** extended cmb handling ********/
580 * struct cmbe - extended channel measurement block
582 * cmb as used by the hardware, may be in any 64 bit physical location,
583 * the fields are described in z/Architecture Principles of Operation,
584 * third edition, chapter 17.
589 u32 device_connect_time
;
590 u32 function_pending_time
;
591 u32 device_disconnect_time
;
592 u32 control_unit_queuing_time
;
593 u32 device_active_only_time
;
594 u32 device_busy_time
;
595 u32 initial_command_response_time
;
599 /* kmalloc only guarantees 8 byte alignment, but we need cmbe
600 * pointers to be naturally aligned. Make sure to allocate
601 * enough space for two cmbes */
602 static inline struct cmbe
* cmbe_align(struct cmbe
*c
)
605 addr
= ((unsigned long)c
+ sizeof (struct cmbe
) - sizeof(long)) &
606 ~(sizeof (struct cmbe
) - sizeof(long));
607 return (struct cmbe
*)addr
;
611 alloc_cmbe (struct ccw_device
*cdev
)
614 cmbe
= kmalloc (sizeof (*cmbe
) * 2, GFP_KERNEL
);
618 spin_lock_irq(cdev
->ccwlock
);
619 if (cdev
->private->cmb
) {
621 spin_unlock_irq(cdev
->ccwlock
);
625 cdev
->private->cmb
= cmbe
;
626 spin_unlock_irq(cdev
->ccwlock
);
628 /* activate global measurement if this is the first channel */
629 spin_lock(&cmb_area
.lock
);
630 if (list_empty(&cmb_area
.list
))
631 cmf_activate(NULL
, 1);
632 list_add_tail(&cdev
->private->cmb_list
, &cmb_area
.list
);
633 spin_unlock(&cmb_area
.lock
);
639 free_cmbe (struct ccw_device
*cdev
)
641 spin_lock_irq(cdev
->ccwlock
);
642 if (cdev
->private->cmb
)
643 kfree(cdev
->private->cmb
);
644 cdev
->private->cmb
= NULL
;
645 spin_unlock_irq(cdev
->ccwlock
);
647 /* deactivate global measurement if this is the last channel */
648 spin_lock(&cmb_area
.lock
);
649 list_del_init(&cdev
->private->cmb_list
);
650 if (list_empty(&cmb_area
.list
))
651 cmf_activate(NULL
, 0);
652 spin_unlock(&cmb_area
.lock
);
656 set_cmbe(struct ccw_device
*cdev
, u32 mme
)
660 if (!cdev
->private->cmb
)
662 mba
= mme
? (unsigned long) cmbe_align(cdev
->private->cmb
) : 0;
664 return set_schib_wait(cdev
, mme
, 1, mba
);
669 read_cmbe (struct ccw_device
*cdev
, int index
)
671 /* yes, we have to put it on the stack
672 * because the cmb must only be accessed
673 * atomically, e.g. with mvc */
678 spin_lock_irqsave(cdev
->ccwlock
, flags
);
679 if (!cdev
->private->cmb
) {
680 spin_unlock_irqrestore(cdev
->ccwlock
, flags
);
684 cmb
= *cmbe_align(cdev
->private->cmb
);
685 spin_unlock_irqrestore(cdev
->ccwlock
, flags
);
688 case cmb_ssch_rsch_count
:
689 return cmb
.ssch_rsch_count
;
690 case cmb_sample_count
:
691 return cmb
.sample_count
;
692 case cmb_device_connect_time
:
693 val
= cmb
.device_connect_time
;
695 case cmb_function_pending_time
:
696 val
= cmb
.function_pending_time
;
698 case cmb_device_disconnect_time
:
699 val
= cmb
.device_disconnect_time
;
701 case cmb_control_unit_queuing_time
:
702 val
= cmb
.control_unit_queuing_time
;
704 case cmb_device_active_only_time
:
705 val
= cmb
.device_active_only_time
;
707 case cmb_device_busy_time
:
708 val
= cmb
.device_busy_time
;
710 case cmb_initial_command_response_time
:
711 val
= cmb
.initial_command_response_time
;
716 return time_to_avg_nsec(val
, cmb
.sample_count
);
720 readall_cmbe (struct ccw_device
*cdev
, struct cmbdata
*data
)
722 /* yes, we have to put it on the stack
723 * because the cmb must only be accessed
724 * atomically, e.g. with mvc */
729 spin_lock_irqsave(cdev
->ccwlock
, flags
);
730 if (!cdev
->private->cmb
) {
731 spin_unlock_irqrestore(cdev
->ccwlock
, flags
);
735 cmb
= *cmbe_align(cdev
->private->cmb
);
736 time
= get_clock() - cdev
->private->cmb_start_time
;
737 spin_unlock_irqrestore(cdev
->ccwlock
, flags
);
739 memset (data
, 0, sizeof(struct cmbdata
));
741 /* we only know values before device_busy_time */
742 data
->size
= offsetof(struct cmbdata
, device_busy_time
);
744 /* conver to nanoseconds */
745 data
->elapsed_time
= (time
* 1000) >> 12;
747 /* copy data to new structure */
748 data
->ssch_rsch_count
= cmb
.ssch_rsch_count
;
749 data
->sample_count
= cmb
.sample_count
;
751 /* time fields are converted to nanoseconds while copying */
752 data
->device_connect_time
= time_to_nsec(cmb
.device_connect_time
);
753 data
->function_pending_time
= time_to_nsec(cmb
.function_pending_time
);
754 data
->device_disconnect_time
= time_to_nsec(cmb
.device_disconnect_time
);
755 data
->control_unit_queuing_time
756 = time_to_nsec(cmb
.control_unit_queuing_time
);
757 data
->device_active_only_time
758 = time_to_nsec(cmb
.device_active_only_time
);
759 data
->device_busy_time
= time_to_nsec(cmb
.device_busy_time
);
760 data
->initial_command_response_time
761 = time_to_nsec(cmb
.initial_command_response_time
);
767 reset_cmbe(struct ccw_device
*cdev
)
770 spin_lock_irq(cdev
->ccwlock
);
771 cmb
= cmbe_align(cdev
->private->cmb
);
773 memset (cmb
, 0, sizeof (*cmb
));
774 cdev
->private->cmb_start_time
= get_clock();
775 spin_unlock_irq(cdev
->ccwlock
);
778 static struct attribute_group cmf_attr_group_ext
;
780 static struct cmb_operations cmbops_extended
= {
785 .readall
= readall_cmbe
,
787 .attr_group
= &cmf_attr_group_ext
,
792 cmb_show_attr(struct device
*dev
, char *buf
, enum cmb_index idx
)
794 return sprintf(buf
, "%lld\n",
795 (unsigned long long) cmf_read(to_ccwdev(dev
), idx
));
799 cmb_show_avg_sample_interval(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
801 struct ccw_device
*cdev
;
805 cdev
= to_ccwdev(dev
);
806 interval
= get_clock() - cdev
->private->cmb_start_time
;
807 count
= cmf_read(cdev
, cmb_sample_count
);
812 return sprintf(buf
, "%ld\n", interval
);
816 cmb_show_avg_utilization(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
823 ret
= cmf_readall(to_ccwdev(dev
), &data
);
827 utilization
= data
.device_connect_time
+
828 data
.function_pending_time
+
829 data
.device_disconnect_time
;
831 /* shift to avoid long long division */
832 while (-1ul < (data
.elapsed_time
| utilization
)) {
834 data
.elapsed_time
>>= 8;
837 /* calculate value in 0.1 percent units */
838 t
= (unsigned long) data
.elapsed_time
/ 1000;
839 u
= (unsigned long) utilization
/ t
;
841 return sprintf(buf
, "%02ld.%01ld%%\n", u
/ 10, u
- (u
/ 10) * 10);
844 #define cmf_attr(name) \
845 static ssize_t show_ ## name (struct device * dev, struct device_attribute *attr, char * buf) \
846 { return cmb_show_attr((dev), buf, cmb_ ## name); } \
847 static DEVICE_ATTR(name, 0444, show_ ## name, NULL);
849 #define cmf_attr_avg(name) \
850 static ssize_t show_avg_ ## name (struct device * dev, struct device_attribute *attr, char * buf) \
851 { return cmb_show_attr((dev), buf, cmb_ ## name); } \
852 static DEVICE_ATTR(avg_ ## name, 0444, show_avg_ ## name, NULL);
854 cmf_attr(ssch_rsch_count
);
855 cmf_attr(sample_count
);
856 cmf_attr_avg(device_connect_time
);
857 cmf_attr_avg(function_pending_time
);
858 cmf_attr_avg(device_disconnect_time
);
859 cmf_attr_avg(control_unit_queuing_time
);
860 cmf_attr_avg(device_active_only_time
);
861 cmf_attr_avg(device_busy_time
);
862 cmf_attr_avg(initial_command_response_time
);
864 static DEVICE_ATTR(avg_sample_interval
, 0444, cmb_show_avg_sample_interval
, NULL
);
865 static DEVICE_ATTR(avg_utilization
, 0444, cmb_show_avg_utilization
, NULL
);
867 static struct attribute
*cmf_attributes
[] = {
868 &dev_attr_avg_sample_interval
.attr
,
869 &dev_attr_avg_utilization
.attr
,
870 &dev_attr_ssch_rsch_count
.attr
,
871 &dev_attr_sample_count
.attr
,
872 &dev_attr_avg_device_connect_time
.attr
,
873 &dev_attr_avg_function_pending_time
.attr
,
874 &dev_attr_avg_device_disconnect_time
.attr
,
875 &dev_attr_avg_control_unit_queuing_time
.attr
,
876 &dev_attr_avg_device_active_only_time
.attr
,
880 static struct attribute_group cmf_attr_group
= {
882 .attrs
= cmf_attributes
,
885 static struct attribute
*cmf_attributes_ext
[] = {
886 &dev_attr_avg_sample_interval
.attr
,
887 &dev_attr_avg_utilization
.attr
,
888 &dev_attr_ssch_rsch_count
.attr
,
889 &dev_attr_sample_count
.attr
,
890 &dev_attr_avg_device_connect_time
.attr
,
891 &dev_attr_avg_function_pending_time
.attr
,
892 &dev_attr_avg_device_disconnect_time
.attr
,
893 &dev_attr_avg_control_unit_queuing_time
.attr
,
894 &dev_attr_avg_device_active_only_time
.attr
,
895 &dev_attr_avg_device_busy_time
.attr
,
896 &dev_attr_avg_initial_command_response_time
.attr
,
900 static struct attribute_group cmf_attr_group_ext
= {
902 .attrs
= cmf_attributes_ext
,
905 static ssize_t
cmb_enable_show(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
907 return sprintf(buf
, "%d\n", to_ccwdev(dev
)->private->cmb
? 1 : 0);
910 static ssize_t
cmb_enable_store(struct device
*dev
, struct device_attribute
*attr
, const char *buf
, size_t c
)
912 struct ccw_device
*cdev
;
915 cdev
= to_ccwdev(dev
);
919 ret
= disable_cmf(cdev
);
921 printk(KERN_INFO
"disable_cmf failed (%d)\n", ret
);
924 ret
= enable_cmf(cdev
);
925 if (ret
&& ret
!= -EBUSY
)
926 printk(KERN_INFO
"enable_cmf failed (%d)\n", ret
);
933 DEVICE_ATTR(cmb_enable
, 0644, cmb_enable_show
, cmb_enable_store
);
935 /* enable_cmf/disable_cmf: module interface for cmf (de)activation */
937 enable_cmf(struct ccw_device
*cdev
)
941 ret
= cmbops
->alloc(cdev
);
945 ret
= cmbops
->set(cdev
, 2);
950 ret
= sysfs_create_group(&cdev
->dev
.kobj
, cmbops
->attr_group
);
953 cmbops
->set(cdev
, 0); //FIXME: this can fail
959 disable_cmf(struct ccw_device
*cdev
)
963 ret
= cmbops
->set(cdev
, 0);
967 sysfs_remove_group(&cdev
->dev
.kobj
, cmbops
->attr_group
);
972 cmf_read(struct ccw_device
*cdev
, int index
)
974 return cmbops
->read(cdev
, index
);
978 cmf_readall(struct ccw_device
*cdev
, struct cmbdata
*data
)
980 return cmbops
->readall(cdev
, data
);
987 char *detect_string
= "parameter";
989 /* We cannot really autoprobe this. If the user did not give a parameter,
990 see if we are running on z990 or up, otherwise fall back to basic mode. */
992 if (format
== CMF_AUTODETECT
) {
993 if (!css_characteristics_avail
||
994 !css_general_characteristics
.ext_mb
) {
997 format
= CMF_EXTENDED
;
999 detect_string
= "autodetected";
1001 detect_string
= "parameter";
1006 format_string
= "basic";
1007 cmbops
= &cmbops_basic
;
1008 if (cmb_area
.num_channels
> 4096 || cmb_area
.num_channels
< 1) {
1009 printk(KERN_ERR
"Basic channel measurement facility"
1010 " can only use 1 to 4096 devices\n"
1011 KERN_ERR
"when the cmf driver is built"
1012 " as a loadable module\n");
1017 format_string
= "extended";
1018 cmbops
= &cmbops_extended
;
1021 printk(KERN_ERR
"Invalid format %d for channel "
1022 "measurement facility\n", format
);
1026 printk(KERN_INFO
"Channel measurement facility using %s format (%s)\n",
1027 format_string
, detect_string
);
1031 module_init(init_cmf
);
1034 MODULE_AUTHOR("Arnd Bergmann <arndb@de.ibm.com>");
1035 MODULE_LICENSE("GPL");
1036 MODULE_DESCRIPTION("channel measurement facility base driver\n"
1037 "Copyright 2003 IBM Corporation\n");
1039 EXPORT_SYMBOL_GPL(enable_cmf
);
1040 EXPORT_SYMBOL_GPL(disable_cmf
);
1041 EXPORT_SYMBOL_GPL(cmf_read
);
1042 EXPORT_SYMBOL_GPL(cmf_readall
);