3 * linux/drivers/s390/cio/qdio.c
5 * Linux for S/390 QDIO base support, Hipersocket base support
8 * Copyright 2000,2002 IBM Corporation
9 * Author(s): Utz Bacher <utz.bacher@de.ibm.com>
10 * 2.6 cio integration by Cornelia Huck <cohuck@de.ibm.com>
12 * Restriction: only 63 iqdio subchannels would have its own indicator,
13 * after that, subsequent subchannels share one indicator
18 * This program is free software; you can redistribute it and/or modify
19 * it under the terms of the GNU General Public License as published by
20 * the Free Software Foundation; either version 2, or (at your option)
23 * This program is distributed in the hope that it will be useful,
24 * but WITHOUT ANY WARRANTY; without even the implied warranty of
25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
26 * GNU General Public License for more details.
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, write to the Free Software
30 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
33 #include <linux/config.h>
34 #include <linux/module.h>
35 #include <linux/init.h>
37 #include <linux/slab.h>
38 #include <linux/kernel.h>
39 #include <linux/proc_fs.h>
40 #include <linux/timer.h>
42 #include <asm/ccwdev.h>
44 #include <asm/atomic.h>
45 #include <asm/semaphore.h>
46 #include <asm/timex.h>
48 #include <asm/debug.h>
59 #define VERSION_QDIO_C "$Revision: 1.101 $"
61 /****************** MODULE PARAMETER VARIABLES ********************/
62 MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>");
63 MODULE_DESCRIPTION("QDIO base support version 2, " \
64 "Copyright 2000 IBM Corporation");
65 MODULE_LICENSE("GPL");
67 /******************** HERE WE GO ***********************************/
69 static const char version
[] = "QDIO base support version 2 ("
70 VERSION_QDIO_C
"/" VERSION_QDIO_H
"/" VERSION_CIO_QDIO_H
")";
72 #ifdef QDIO_PERFORMANCE_STATS
73 static int proc_perf_file_registration
;
74 static unsigned long i_p_c
, i_p_nc
, o_p_c
, o_p_nc
, ii_p_c
, ii_p_nc
;
75 static struct qdio_perf_stats perf_stats
;
76 #endif /* QDIO_PERFORMANCE_STATS */
78 static int hydra_thinints
;
81 static int indicator_used
[INDICATORS_PER_CACHELINE
];
82 static __u32
* volatile indicators
;
83 static __u32
volatile spare_indicator
;
84 static atomic_t spare_indicator_usecount
;
86 static debug_info_t
*qdio_dbf_setup
;
87 static debug_info_t
*qdio_dbf_sbal
;
88 static debug_info_t
*qdio_dbf_trace
;
89 static debug_info_t
*qdio_dbf_sense
;
90 #ifdef CONFIG_QDIO_DEBUG
91 static debug_info_t
*qdio_dbf_slsb_out
;
92 static debug_info_t
*qdio_dbf_slsb_in
;
93 #endif /* CONFIG_QDIO_DEBUG */
96 static volatile struct qdio_q
*tiq_list
=NULL
; /* volatile as it could change
97 during a while loop */
98 static DEFINE_SPINLOCK(ttiq_list_lock
);
99 static int register_thinint_result
;
100 static void tiqdio_tl(unsigned long);
101 static DECLARE_TASKLET(tiqdio_tasklet
,tiqdio_tl
,0);
103 /* not a macro, as one of the arguments is atomic_read */
105 qdio_min(int a
,int b
)
113 /***************** SCRUBBER HELPER ROUTINES **********************/
116 qdio_get_micros(void)
118 return (get_clock() >> 10); /* time>>12 is microseconds */
122 * unfortunately, we can't just xchg the values; in do_QDIO we want to reserve
123 * the q in any case, so that we'll not be interrupted when we are in
124 * qdio_mark_tiq... shouldn't have a really bad impact, as reserving almost
125 * ever works (last famous words)
128 qdio_reserve_q(struct qdio_q
*q
)
130 return atomic_add_return(1,&q
->use_count
) - 1;
134 qdio_release_q(struct qdio_q
*q
)
136 atomic_dec(&q
->use_count
);
139 static volatile inline void
140 qdio_set_slsb(volatile char *slsb
, unsigned char value
)
142 xchg((char*)slsb
,value
);
146 qdio_siga_sync(struct qdio_q
*q
, unsigned int gpr2
,
151 QDIO_DBF_TEXT4(0,trace
,"sigasync");
152 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
154 #ifdef QDIO_PERFORMANCE_STATS
155 perf_stats
.siga_syncs
++;
156 #endif /* QDIO_PERFORMANCE_STATS */
158 cc
= do_siga_sync(q
->irq
, gpr2
, gpr3
);
160 QDIO_DBF_HEX3(0,trace
,&cc
,sizeof(int*));
166 qdio_siga_sync_q(struct qdio_q
*q
)
169 return qdio_siga_sync(q
, 0, q
->mask
);
170 return qdio_siga_sync(q
, q
->mask
, 0);
174 * returns QDIO_SIGA_ERROR_ACCESS_EXCEPTION as cc, when SIGA returns
175 * an access exception
178 qdio_siga_output(struct qdio_q
*q
)
184 #ifdef QDIO_PERFORMANCE_STATS
185 perf_stats
.siga_outs
++;
186 #endif /* QDIO_PERFORMANCE_STATS */
188 QDIO_DBF_TEXT4(0,trace
,"sigaout");
189 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
192 cc
= do_siga_output(q
->irq
, q
->mask
, &busy_bit
);
193 //QDIO_PRINT_ERR("cc=%x, busy=%x\n",cc,busy_bit);
194 if ((cc
==2) && (busy_bit
) && (q
->is_iqdio_q
)) {
197 if ((NOW
-start_time
)>QDIO_BUSY_BIT_PATIENCE
)
203 if ((cc
==2) && (busy_bit
))
204 cc
|= QDIO_SIGA_ERROR_B_BIT_SET
;
207 QDIO_DBF_HEX3(0,trace
,&cc
,sizeof(int*));
213 qdio_siga_input(struct qdio_q
*q
)
217 QDIO_DBF_TEXT4(0,trace
,"sigain");
218 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
220 #ifdef QDIO_PERFORMANCE_STATS
221 perf_stats
.siga_ins
++;
222 #endif /* QDIO_PERFORMANCE_STATS */
224 cc
= do_siga_input(q
->irq
, q
->mask
);
227 QDIO_DBF_HEX3(0,trace
,&cc
,sizeof(int*));
232 /* locked by the locks in qdio_activate and qdio_cleanup */
233 static __u32
volatile *
234 qdio_get_indicator(void)
238 for (i
=1;i
<INDICATORS_PER_CACHELINE
;i
++)
239 if (!indicator_used
[i
]) {
243 atomic_inc(&spare_indicator_usecount
);
244 return (__u32
* volatile) &spare_indicator
;
247 /* locked by the locks in qdio_activate and qdio_cleanup */
249 qdio_put_indicator(__u32
*addr
)
253 if ( (addr
) && (addr
!=&spare_indicator
) ) {
257 if (addr
== &spare_indicator
)
258 atomic_dec(&spare_indicator_usecount
);
261 static inline volatile void
262 tiqdio_clear_summary_bit(__u32
*location
)
264 QDIO_DBF_TEXT5(0,trace
,"clrsummb");
265 QDIO_DBF_HEX5(0,trace
,&location
,sizeof(void*));
270 static inline volatile void
271 tiqdio_set_summary_bit(__u32
*location
)
273 QDIO_DBF_TEXT5(0,trace
,"setsummb");
274 QDIO_DBF_HEX5(0,trace
,&location
,sizeof(void*));
280 tiqdio_sched_tl(void)
282 tasklet_hi_schedule(&tiqdio_tasklet
);
286 qdio_mark_tiq(struct qdio_q
*q
)
290 QDIO_DBF_TEXT4(0,trace
,"mark iq");
291 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
293 spin_lock_irqsave(&ttiq_list_lock
,flags
);
294 if (unlikely(atomic_read(&q
->is_in_shutdown
)))
300 if ((q
->list_prev
) || (q
->list_next
))
308 q
->list_next
=tiq_list
;
309 q
->list_prev
=tiq_list
->list_prev
;
310 tiq_list
->list_prev
->list_next
=q
;
311 tiq_list
->list_prev
=q
;
313 spin_unlock_irqrestore(&ttiq_list_lock
,flags
);
315 tiqdio_set_summary_bit((__u32
*)q
->dev_st_chg_ind
);
319 spin_unlock_irqrestore(&ttiq_list_lock
,flags
);
324 qdio_mark_q(struct qdio_q
*q
)
326 QDIO_DBF_TEXT4(0,trace
,"mark q");
327 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
329 if (unlikely(atomic_read(&q
->is_in_shutdown
)))
332 tasklet_schedule(&q
->tasklet
);
336 qdio_stop_polling(struct qdio_q
*q
)
338 #ifdef QDIO_USE_PROCESSING_STATE
341 if (!atomic_swap(&q
->polling
,0))
344 QDIO_DBF_TEXT4(0,trace
,"stoppoll");
345 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
347 /* show the card that we are not polling anymore */
351 gsf
=GET_SAVED_FRONTIER(q
);
352 set_slsb(&q
->slsb
.acc
.val
[(gsf
+QDIO_MAX_BUFFERS_PER_Q
-1)&
353 (QDIO_MAX_BUFFERS_PER_Q
-1)],
354 SLSB_P_INPUT_NOT_INIT
);
356 * we don't issue this SYNC_MEMORY, as we trust Rick T and
357 * moreover will not use the PROCESSING state under VM, so
358 * q->polling was 0 anyway
361 if (q
->slsb
.acc
.val
[gsf
]!=SLSB_P_INPUT_PRIMED
)
364 * set our summary bit again, as otherwise there is a
365 * small window we can miss between resetting it and
366 * checking for PRIMED state
369 tiqdio_set_summary_bit((__u32
*)q
->dev_st_chg_ind
);
372 #else /* QDIO_USE_PROCESSING_STATE */
374 #endif /* QDIO_USE_PROCESSING_STATE */
378 * see the comment in do_QDIO and before qdio_reserve_q about the
379 * sophisticated locking outside of unmark_q, so that we don't need to
380 * disable the interrupts :-)
383 qdio_unmark_q(struct qdio_q
*q
)
387 QDIO_DBF_TEXT4(0,trace
,"unmark q");
388 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
390 if ((!q
->list_prev
)||(!q
->list_next
))
393 if ((q
->is_thinint_q
)&&(q
->is_input_q
)) {
395 spin_lock_irqsave(&ttiq_list_lock
,flags
);
396 /* in case cleanup has done this already and simultanously
397 * qdio_unmark_q is called from the interrupt handler, we've
398 * got to check this in this specific case again */
399 if ((!q
->list_prev
)||(!q
->list_next
))
401 if (q
->list_next
==q
) {
402 /* q was the only interesting q */
407 q
->list_next
->list_prev
=q
->list_prev
;
408 q
->list_prev
->list_next
=q
->list_next
;
409 tiq_list
=q
->list_next
;
414 spin_unlock_irqrestore(&ttiq_list_lock
,flags
);
418 static inline unsigned long
419 tiqdio_clear_global_summary(void)
423 QDIO_DBF_TEXT5(0,trace
,"clrglobl");
425 time
= do_clear_global_summary();
427 QDIO_DBF_HEX5(0,trace
,&time
,sizeof(unsigned long));
433 /************************* OUTBOUND ROUTINES *******************************/
436 qdio_get_outbound_buffer_frontier(struct qdio_q
*q
)
440 int first_not_to_check
;
443 QDIO_DBF_TEXT4(0,trace
,"getobfro");
444 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
446 slsb
=&q
->slsb
.acc
.val
[0];
447 f_mod_no
=f
=q
->first_to_check
;
449 * f points to already processed elements, so f+no_used is correct...
450 * ... but: we don't check 128 buffers, as otherwise
451 * qdio_has_outbound_q_moved would return 0
453 first_not_to_check
=f
+qdio_min(atomic_read(&q
->number_of_buffers_used
),
454 (QDIO_MAX_BUFFERS_PER_Q
-1));
456 if ((!q
->is_iqdio_q
)&&(!q
->hydra_gives_outbound_pcis
))
460 if (f
==first_not_to_check
)
463 switch(slsb
[f_mod_no
]) {
465 /* the adapter has not fetched the output yet */
466 case SLSB_CU_OUTPUT_PRIMED
:
467 QDIO_DBF_TEXT5(0,trace
,"outpprim");
470 /* the adapter got it */
471 case SLSB_P_OUTPUT_EMPTY
:
472 atomic_dec(&q
->number_of_buffers_used
);
474 f_mod_no
=f
&(QDIO_MAX_BUFFERS_PER_Q
-1);
475 QDIO_DBF_TEXT5(0,trace
,"outpempt");
478 case SLSB_P_OUTPUT_ERROR
:
479 QDIO_DBF_TEXT3(0,trace
,"outperr");
480 sprintf(dbf_text
,"%x-%x-%x",f_mod_no
,
481 q
->sbal
[f_mod_no
]->element
[14].sbalf
.value
,
482 q
->sbal
[f_mod_no
]->element
[15].sbalf
.value
);
483 QDIO_DBF_TEXT3(1,trace
,dbf_text
);
484 QDIO_DBF_HEX2(1,sbal
,q
->sbal
[f_mod_no
],256);
486 /* kind of process the buffer */
487 set_slsb(&q
->slsb
.acc
.val
[f_mod_no
], SLSB_P_OUTPUT_NOT_INIT
);
490 * we increment the frontier, as this buffer
491 * was processed obviously
493 atomic_dec(&q
->number_of_buffers_used
);
494 f_mod_no
=(f_mod_no
+1)&(QDIO_MAX_BUFFERS_PER_Q
-1);
497 q
->error_status_flags
|=
498 QDIO_STATUS_MORE_THAN_ONE_QDIO_ERROR
;
499 q
->qdio_error
=SLSB_P_OUTPUT_ERROR
;
500 q
->error_status_flags
|=QDIO_STATUS_LOOK_FOR_ERROR
;
506 QDIO_DBF_TEXT5(0,trace
,"outpni");
509 return (q
->first_to_check
=f_mod_no
);
512 /* all buffers are processed */
514 qdio_is_outbound_q_done(struct qdio_q
*q
)
517 #ifdef CONFIG_QDIO_DEBUG
521 no_used
=atomic_read(&q
->number_of_buffers_used
);
523 #ifdef CONFIG_QDIO_DEBUG
525 sprintf(dbf_text
,"oqisnt%02x",no_used
);
526 QDIO_DBF_TEXT4(0,trace
,dbf_text
);
528 QDIO_DBF_TEXT4(0,trace
,"oqisdone");
530 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
531 #endif /* CONFIG_QDIO_DEBUG */
536 qdio_has_outbound_q_moved(struct qdio_q
*q
)
540 i
=qdio_get_outbound_buffer_frontier(q
);
542 if ( (i
!=GET_SAVED_FRONTIER(q
)) ||
543 (q
->error_status_flags
&QDIO_STATUS_LOOK_FOR_ERROR
) ) {
545 QDIO_DBF_TEXT4(0,trace
,"oqhasmvd");
546 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
549 QDIO_DBF_TEXT4(0,trace
,"oqhsntmv");
550 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
556 qdio_kick_outbound_q(struct qdio_q
*q
)
559 #ifdef CONFIG_QDIO_DEBUG
562 QDIO_DBF_TEXT4(0,trace
,"kickoutq");
563 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
564 #endif /* CONFIG_QDIO_DEBUG */
569 /* here's the story with cc=2 and busy bit set (thanks, Rick):
570 * VM's CP could present us cc=2 and busy bit set on SIGA-write
571 * during reconfiguration of their Guest LAN (only in HIPERS mode,
572 * QDIO mode is asynchronous -- cc=2 and busy bit there will take
573 * the queues down immediately; and not being under VM we have a
574 * problem on cc=2 and busy bit set right away).
576 * Therefore qdio_siga_output will try for a short time constantly,
577 * if such a condition occurs. If it doesn't change, it will
578 * increase the busy_siga_counter and save the timestamp, and
579 * schedule the queue for later processing (via mark_q, using the
580 * queue tasklet). __qdio_outbound_processing will check out the
581 * counter. If non-zero, it will call qdio_kick_outbound_q as often
582 * as the value of the counter. This will attempt further SIGA
583 * instructions. For each successful SIGA, the counter is
584 * decreased, for failing SIGAs the counter remains the same, after
586 * After some time of no movement, qdio_kick_outbound_q will
587 * finally fail and reflect corresponding error codes to call
588 * the upper layer module and have it take the queues down.
590 * Note that this is a change from the original HiperSockets design
591 * (saying cc=2 and busy bit means take the queues down), but in
592 * these days Guest LAN didn't exist... excessive cc=2 with busy bit
593 * conditions will still take the queues down, but the threshold is
594 * higher due to the Guest LAN environment.
598 result
=qdio_siga_output(q
);
602 /* went smooth this time, reset timestamp */
603 #ifdef CONFIG_QDIO_DEBUG
604 QDIO_DBF_TEXT3(0,trace
,"cc2reslv");
605 sprintf(dbf_text
,"%4x%2x%2x",q
->irq
,q
->q_no
,
606 atomic_read(&q
->busy_siga_counter
));
607 QDIO_DBF_TEXT3(0,trace
,dbf_text
);
608 #endif /* CONFIG_QDIO_DEBUG */
609 q
->timing
.busy_start
=0;
611 case (2|QDIO_SIGA_ERROR_B_BIT_SET
):
612 /* cc=2 and busy bit: */
613 atomic_inc(&q
->busy_siga_counter
);
615 /* if the last siga was successful, save
617 if (!q
->timing
.busy_start
)
618 q
->timing
.busy_start
=NOW
;
620 /* if we're in time, don't touch error_status_flags
622 if (NOW
-q
->timing
.busy_start
<QDIO_BUSY_BIT_GIVE_UP
) {
626 QDIO_DBF_TEXT2(0,trace
,"cc2REPRT");
627 #ifdef CONFIG_QDIO_DEBUG
628 sprintf(dbf_text
,"%4x%2x%2x",q
->irq
,q
->q_no
,
629 atomic_read(&q
->busy_siga_counter
));
630 QDIO_DBF_TEXT3(0,trace
,dbf_text
);
631 #endif /* CONFIG_QDIO_DEBUG */
632 /* else fallthrough and report error */
634 /* for plain cc=1, 2 or 3: */
636 q
->error_status_flags
|=
637 QDIO_STATUS_MORE_THAN_ONE_SIGA_ERROR
;
638 q
->error_status_flags
|=
639 QDIO_STATUS_LOOK_FOR_ERROR
;
640 q
->siga_error
=result
;
645 qdio_kick_outbound_handler(struct qdio_q
*q
)
647 int start
, end
, real_end
, count
;
648 #ifdef CONFIG_QDIO_DEBUG
652 start
= q
->first_element_to_kick
;
653 /* last_move_ftc was just updated */
654 real_end
= GET_SAVED_FRONTIER(q
);
655 end
= (real_end
+QDIO_MAX_BUFFERS_PER_Q
-1)&
656 (QDIO_MAX_BUFFERS_PER_Q
-1);
657 count
= (end
+QDIO_MAX_BUFFERS_PER_Q
+1-start
)&
658 (QDIO_MAX_BUFFERS_PER_Q
-1);
660 #ifdef CONFIG_QDIO_DEBUG
661 QDIO_DBF_TEXT4(0,trace
,"kickouth");
662 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
664 sprintf(dbf_text
,"s=%2xc=%2x",start
,count
);
665 QDIO_DBF_TEXT4(0,trace
,dbf_text
);
666 #endif /* CONFIG_QDIO_DEBUG */
668 if (q
->state
==QDIO_IRQ_STATE_ACTIVE
)
669 q
->handler(q
->cdev
,QDIO_STATUS_OUTBOUND_INT
|
670 q
->error_status_flags
,
671 q
->qdio_error
,q
->siga_error
,q
->q_no
,start
,count
,
674 /* for the next time: */
675 q
->first_element_to_kick
=real_end
;
678 q
->error_status_flags
=0;
682 __qdio_outbound_processing(struct qdio_q
*q
)
686 QDIO_DBF_TEXT4(0,trace
,"qoutproc");
687 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
689 if (unlikely(qdio_reserve_q(q
))) {
691 #ifdef QDIO_PERFORMANCE_STATS
693 #endif /* QDIO_PERFORMANCE_STATS */
694 /* as we're sissies, we'll check next time */
695 if (likely(!atomic_read(&q
->is_in_shutdown
))) {
697 QDIO_DBF_TEXT4(0,trace
,"busy,agn");
701 #ifdef QDIO_PERFORMANCE_STATS
703 perf_stats
.tl_runs
++;
704 #endif /* QDIO_PERFORMANCE_STATS */
706 /* see comment in qdio_kick_outbound_q */
707 siga_attempts
=atomic_read(&q
->busy_siga_counter
);
708 while (siga_attempts
) {
709 atomic_dec(&q
->busy_siga_counter
);
710 qdio_kick_outbound_q(q
);
714 if (qdio_has_outbound_q_moved(q
))
715 qdio_kick_outbound_handler(q
);
719 * for asynchronous queues, we better check, if the fill
720 * level is too high. for synchronous queues, the fill
721 * level will never be that high.
723 if (atomic_read(&q
->number_of_buffers_used
)>
724 IQDIO_FILL_LEVEL_TO_POLL
)
727 } else if (!q
->hydra_gives_outbound_pcis
)
728 if (!qdio_is_outbound_q_done(q
))
735 qdio_outbound_processing(struct qdio_q
*q
)
737 __qdio_outbound_processing(q
);
740 /************************* INBOUND ROUTINES *******************************/
744 qdio_get_inbound_buffer_frontier(struct qdio_q
*q
)
748 int first_not_to_check
;
749 #ifdef CONFIG_QDIO_DEBUG
751 #endif /* CONFIG_QDIO_DEBUG */
752 #ifdef QDIO_USE_PROCESSING_STATE
753 int last_position
=-1;
754 #endif /* QDIO_USE_PROCESSING_STATE */
756 QDIO_DBF_TEXT4(0,trace
,"getibfro");
757 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
759 slsb
=&q
->slsb
.acc
.val
[0];
760 f_mod_no
=f
=q
->first_to_check
;
762 * we don't check 128 buffers, as otherwise qdio_has_inbound_q_moved
765 first_not_to_check
=f
+qdio_min(atomic_read(&q
->number_of_buffers_used
),
766 (QDIO_MAX_BUFFERS_PER_Q
-1));
769 * we don't use this one, as a PCI or we after a thin interrupt
770 * will sync the queues
775 f_mod_no
=f
&(QDIO_MAX_BUFFERS_PER_Q
-1);
776 if (f
==first_not_to_check
)
778 switch (slsb
[f_mod_no
]) {
780 /* CU_EMPTY means frontier is reached */
781 case SLSB_CU_INPUT_EMPTY
:
782 QDIO_DBF_TEXT5(0,trace
,"inptempt");
785 /* P_PRIMED means set slsb to P_PROCESSING and move on */
786 case SLSB_P_INPUT_PRIMED
:
787 QDIO_DBF_TEXT5(0,trace
,"inptprim");
789 #ifdef QDIO_USE_PROCESSING_STATE
791 * as soon as running under VM, polling the input queues will
792 * kill VM in terms of CP overhead
795 set_slsb(&slsb
[f_mod_no
],SLSB_P_INPUT_NOT_INIT
);
797 /* set the previous buffer to NOT_INIT. The current
798 * buffer will be set to PROCESSING at the end of
799 * this function to avoid further interrupts. */
800 if (last_position
>=0)
801 set_slsb(&slsb
[last_position
],
802 SLSB_P_INPUT_NOT_INIT
);
803 atomic_set(&q
->polling
,1);
804 last_position
=f_mod_no
;
806 #else /* QDIO_USE_PROCESSING_STATE */
807 set_slsb(&slsb
[f_mod_no
],SLSB_P_INPUT_NOT_INIT
);
808 #endif /* QDIO_USE_PROCESSING_STATE */
810 * not needed, as the inbound queue will be synced on the next
811 * siga-r, resp. tiqdio_is_inbound_q_done will do the siga-s
815 atomic_dec(&q
->number_of_buffers_used
);
818 case SLSB_P_INPUT_NOT_INIT
:
819 case SLSB_P_INPUT_PROCESSING
:
820 QDIO_DBF_TEXT5(0,trace
,"inpnipro");
823 /* P_ERROR means frontier is reached, break and report error */
824 case SLSB_P_INPUT_ERROR
:
825 #ifdef CONFIG_QDIO_DEBUG
826 sprintf(dbf_text
,"inperr%2x",f_mod_no
);
827 QDIO_DBF_TEXT3(1,trace
,dbf_text
);
828 #endif /* CONFIG_QDIO_DEBUG */
829 QDIO_DBF_HEX2(1,sbal
,q
->sbal
[f_mod_no
],256);
831 /* kind of process the buffer */
832 set_slsb(&slsb
[f_mod_no
],SLSB_P_INPUT_NOT_INIT
);
835 q
->error_status_flags
|=
836 QDIO_STATUS_MORE_THAN_ONE_QDIO_ERROR
;
837 q
->qdio_error
=SLSB_P_INPUT_ERROR
;
838 q
->error_status_flags
|=QDIO_STATUS_LOOK_FOR_ERROR
;
840 /* we increment the frontier, as this buffer
841 * was processed obviously */
842 f_mod_no
=(f_mod_no
+1)&(QDIO_MAX_BUFFERS_PER_Q
-1);
843 atomic_dec(&q
->number_of_buffers_used
);
845 #ifdef QDIO_USE_PROCESSING_STATE
847 #endif /* QDIO_USE_PROCESSING_STATE */
851 /* everything else means frontier not changed (HALTED or so) */
856 q
->first_to_check
=f_mod_no
;
858 #ifdef QDIO_USE_PROCESSING_STATE
859 if (last_position
>=0)
860 set_slsb(&slsb
[last_position
],SLSB_P_INPUT_PROCESSING
);
861 #endif /* QDIO_USE_PROCESSING_STATE */
863 QDIO_DBF_HEX4(0,trace
,&q
->first_to_check
,sizeof(int));
865 return q
->first_to_check
;
869 qdio_has_inbound_q_moved(struct qdio_q
*q
)
873 #ifdef QDIO_PERFORMANCE_STATS
874 static int old_pcis
=0;
875 static int old_thinints
=0;
877 if ((old_pcis
==perf_stats
.pcis
)&&(old_thinints
==perf_stats
.thinints
))
878 perf_stats
.start_time_inbound
=NOW
;
880 old_pcis
=perf_stats
.pcis
;
881 #endif /* QDIO_PERFORMANCE_STATS */
883 i
=qdio_get_inbound_buffer_frontier(q
);
884 if ( (i
!=GET_SAVED_FRONTIER(q
)) ||
885 (q
->error_status_flags
&QDIO_STATUS_LOOK_FOR_ERROR
) ) {
887 if ((!q
->siga_sync
)&&(!q
->hydra_gives_outbound_pcis
))
890 QDIO_DBF_TEXT4(0,trace
,"inhasmvd");
891 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
894 QDIO_DBF_TEXT4(0,trace
,"inhsntmv");
895 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
900 /* means, no more buffers to be filled */
902 tiqdio_is_inbound_q_done(struct qdio_q
*q
)
905 #ifdef CONFIG_QDIO_DEBUG
909 no_used
=atomic_read(&q
->number_of_buffers_used
);
911 /* propagate the change from 82 to 80 through VM */
914 #ifdef CONFIG_QDIO_DEBUG
916 sprintf(dbf_text
,"iqisnt%02x",no_used
);
917 QDIO_DBF_TEXT4(0,trace
,dbf_text
);
919 QDIO_DBF_TEXT4(0,trace
,"iniqisdo");
921 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
922 #endif /* CONFIG_QDIO_DEBUG */
928 /* we'll check for more primed buffers in qeth_stop_polling */
931 if (q
->slsb
.acc
.val
[q
->first_to_check
]!=SLSB_P_INPUT_PRIMED
)
933 * nothing more to do, if next buffer is not PRIMED.
934 * note that we did a SYNC_MEMORY before, that there
935 * has been a sychnronization.
936 * we will return 0 below, as there is nothing to do
937 * (stop_polling not necessary, as we have not been
938 * using the PROCESSING state
943 * ok, the next input buffer is primed. that means, that device state
944 * change indicator and adapter local summary are set, so we will find
946 * we will return 0 below, as there is nothing to do, except scheduling
947 * ourselves for the next time.
949 tiqdio_set_summary_bit((__u32
*)q
->dev_st_chg_ind
);
955 qdio_is_inbound_q_done(struct qdio_q
*q
)
958 #ifdef CONFIG_QDIO_DEBUG
962 no_used
=atomic_read(&q
->number_of_buffers_used
);
965 * we need that one for synchronization with the adapter, as it
966 * does a kind of PCI avoidance
971 QDIO_DBF_TEXT4(0,trace
,"inqisdnA");
972 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
973 QDIO_DBF_TEXT4(0,trace
,dbf_text
);
977 if (q
->slsb
.acc
.val
[q
->first_to_check
]==SLSB_P_INPUT_PRIMED
) {
978 /* we got something to do */
979 QDIO_DBF_TEXT4(0,trace
,"inqisntA");
980 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
984 /* on VM, we don't poll, so the q is always done here */
987 if (q
->hydra_gives_outbound_pcis
)
991 * at this point we know, that inbound first_to_check
992 * has (probably) not moved (see qdio_inbound_processing)
994 if (NOW
>GET_SAVED_TIMESTAMP(q
)+q
->timing
.threshold
) {
995 #ifdef CONFIG_QDIO_DEBUG
996 QDIO_DBF_TEXT4(0,trace
,"inqisdon");
997 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
998 sprintf(dbf_text
,"pf%02xcn%02x",q
->first_to_check
,no_used
);
999 QDIO_DBF_TEXT4(0,trace
,dbf_text
);
1000 #endif /* CONFIG_QDIO_DEBUG */
1003 #ifdef CONFIG_QDIO_DEBUG
1004 QDIO_DBF_TEXT4(0,trace
,"inqisntd");
1005 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
1006 sprintf(dbf_text
,"pf%02xcn%02x",q
->first_to_check
,no_used
);
1007 QDIO_DBF_TEXT4(0,trace
,dbf_text
);
1008 #endif /* CONFIG_QDIO_DEBUG */
1014 qdio_kick_inbound_handler(struct qdio_q
*q
)
1016 int count
, start
, end
, real_end
, i
;
1017 #ifdef CONFIG_QDIO_DEBUG
1021 QDIO_DBF_TEXT4(0,trace
,"kickinh");
1022 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
1024 start
=q
->first_element_to_kick
;
1025 real_end
=q
->first_to_check
;
1026 end
=(real_end
+QDIO_MAX_BUFFERS_PER_Q
-1)&(QDIO_MAX_BUFFERS_PER_Q
-1);
1034 i
=(i
+1)&(QDIO_MAX_BUFFERS_PER_Q
-1);
1037 #ifdef CONFIG_QDIO_DEBUG
1038 sprintf(dbf_text
,"s=%2xc=%2x",start
,count
);
1039 QDIO_DBF_TEXT4(0,trace
,dbf_text
);
1040 #endif /* CONFIG_QDIO_DEBUG */
1042 if (likely(q
->state
==QDIO_IRQ_STATE_ACTIVE
))
1044 QDIO_STATUS_INBOUND_INT
|q
->error_status_flags
,
1045 q
->qdio_error
,q
->siga_error
,q
->q_no
,start
,count
,
1048 /* for the next time: */
1049 q
->first_element_to_kick
=real_end
;
1052 q
->error_status_flags
=0;
1054 #ifdef QDIO_PERFORMANCE_STATS
1055 perf_stats
.inbound_time
+=NOW
-perf_stats
.start_time_inbound
;
1056 perf_stats
.inbound_cnt
++;
1057 #endif /* QDIO_PERFORMANCE_STATS */
1061 __tiqdio_inbound_processing(struct qdio_q
*q
, int spare_ind_was_set
)
1063 struct qdio_irq
*irq_ptr
;
1067 QDIO_DBF_TEXT4(0,trace
,"iqinproc");
1068 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
1071 * we first want to reserve the q, so that we know, that we don't
1072 * interrupt ourselves and call qdio_unmark_q, as is_in_shutdown might
1075 if (unlikely(qdio_reserve_q(q
))) {
1077 #ifdef QDIO_PERFORMANCE_STATS
1079 #endif /* QDIO_PERFORMANCE_STATS */
1081 * as we might just be about to stop polling, we make
1082 * sure that we check again at least once more
1087 #ifdef QDIO_PERFORMANCE_STATS
1089 #endif /* QDIO_PERFORMANCE_STATS */
1090 if (unlikely(atomic_read(&q
->is_in_shutdown
))) {
1096 * we reset spare_ind_was_set, when the queue does not use the
1099 if (spare_ind_was_set
)
1100 spare_ind_was_set
= (q
->dev_st_chg_ind
== &spare_indicator
);
1102 if (!(*(q
->dev_st_chg_ind
)) && !spare_ind_was_set
)
1105 * q->dev_st_chg_ind is the indicator, be it shared or not.
1106 * only clear it, if indicator is non-shared
1108 if (!spare_ind_was_set
)
1109 tiqdio_clear_summary_bit((__u32
*)q
->dev_st_chg_ind
);
1111 if (q
->hydra_gives_outbound_pcis
) {
1112 if (!q
->siga_sync_done_on_thinints
) {
1114 } else if ((!q
->siga_sync_done_on_outb_tis
)&&
1115 (q
->hydra_gives_outbound_pcis
)) {
1116 SYNC_MEMORY_ALL_OUTB
;
1122 * maybe we have to do work on our outbound queues... at least
1123 * we have to check the outbound-int-capable thinint-capable
1126 if (q
->hydra_gives_outbound_pcis
) {
1127 irq_ptr
= (struct qdio_irq
*)q
->irq_ptr
;
1128 for (i
=0;i
<irq_ptr
->no_output_qs
;i
++) {
1129 oq
= irq_ptr
->output_qs
[i
];
1130 #ifdef QDIO_PERFORMANCE_STATS
1131 perf_stats
.tl_runs
--;
1132 #endif /* QDIO_PERFORMANCE_STATS */
1133 if (!qdio_is_outbound_q_done(oq
))
1134 __qdio_outbound_processing(oq
);
1138 if (!qdio_has_inbound_q_moved(q
))
1141 qdio_kick_inbound_handler(q
);
1142 if (tiqdio_is_inbound_q_done(q
))
1143 if (!qdio_stop_polling(q
)) {
1145 * we set the flags to get into the stuff next time,
1146 * see also comment in qdio_stop_polling
1148 tiqdio_set_summary_bit((__u32
*)q
->dev_st_chg_ind
);
1156 tiqdio_inbound_processing(struct qdio_q
*q
)
1158 __tiqdio_inbound_processing(q
, atomic_read(&spare_indicator_usecount
));
1162 __qdio_inbound_processing(struct qdio_q
*q
)
1166 QDIO_DBF_TEXT4(0,trace
,"qinproc");
1167 QDIO_DBF_HEX4(0,trace
,&q
,sizeof(void*));
1169 if (unlikely(qdio_reserve_q(q
))) {
1171 #ifdef QDIO_PERFORMANCE_STATS
1173 #endif /* QDIO_PERFORMANCE_STATS */
1174 /* as we're sissies, we'll check next time */
1175 if (likely(!atomic_read(&q
->is_in_shutdown
))) {
1177 QDIO_DBF_TEXT4(0,trace
,"busy,agn");
1181 #ifdef QDIO_PERFORMANCE_STATS
1183 perf_stats
.tl_runs
++;
1184 #endif /* QDIO_PERFORMANCE_STATS */
1187 if (qdio_has_inbound_q_moved(q
)) {
1188 qdio_kick_inbound_handler(q
);
1189 if (!qdio_stop_polling(q
)) {
1191 if (q_laps
<QDIO_Q_LAPS
)
1196 if (!qdio_is_inbound_q_done(q
))
1197 /* means poll time is not yet over */
1205 qdio_inbound_processing(struct qdio_q
*q
)
1207 __qdio_inbound_processing(q
);
1210 /************************* MAIN ROUTINES *******************************/
1212 #ifdef QDIO_USE_PROCESSING_STATE
1214 tiqdio_reset_processing_state(struct qdio_q
*q
, int q_laps
)
1222 * under VM, we have not used the PROCESSING state, so no
1223 * need to stop polling
1228 if (unlikely(qdio_reserve_q(q
))) {
1230 #ifdef QDIO_PERFORMANCE_STATS
1232 #endif /* QDIO_PERFORMANCE_STATS */
1234 * as we might just be about to stop polling, we make
1235 * sure that we check again at least once more
1239 * sanity -- we'd get here without setting the
1242 tiqdio_set_summary_bit((__u32
*)q
->dev_st_chg_ind
);
1246 if (qdio_stop_polling(q
)) {
1250 if (q_laps
<QDIO_Q_LAPS
-1) {
1255 * we set the flags to get into the stuff
1256 * next time, see also comment in qdio_stop_polling
1258 tiqdio_set_summary_bit((__u32
*)q
->dev_st_chg_ind
);
1264 #endif /* QDIO_USE_PROCESSING_STATE */
1267 tiqdio_inbound_checks(void)
1270 int spare_ind_was_set
=0;
1271 #ifdef QDIO_USE_PROCESSING_STATE
1273 #endif /* QDIO_USE_PROCESSING_STATE */
1275 QDIO_DBF_TEXT4(0,trace
,"iqdinbck");
1276 QDIO_DBF_TEXT5(0,trace
,"iqlocsum");
1278 #ifdef QDIO_USE_PROCESSING_STATE
1280 #endif /* QDIO_USE_PROCESSING_STATE */
1282 /* when the spare indicator is used and set, save that and clear it */
1283 if ((atomic_read(&spare_indicator_usecount
)) && spare_indicator
) {
1284 spare_ind_was_set
= 1;
1285 tiqdio_clear_summary_bit((__u32
*)&spare_indicator
);
1288 q
=(struct qdio_q
*)tiq_list
;
1292 __tiqdio_inbound_processing(q
, spare_ind_was_set
);
1293 q
=(struct qdio_q
*)q
->list_next
;
1294 } while (q
!=(struct qdio_q
*)tiq_list
);
1296 #ifdef QDIO_USE_PROCESSING_STATE
1297 q
=(struct qdio_q
*)tiq_list
;
1301 ret
= tiqdio_reset_processing_state(q
, q_laps
);
1308 q
= (struct qdio_q
*)q
->list_next
;
1314 } while (q
!=(struct qdio_q
*)tiq_list
);
1315 #endif /* QDIO_USE_PROCESSING_STATE */
1319 tiqdio_tl(unsigned long data
)
1321 QDIO_DBF_TEXT4(0,trace
,"iqdio_tl");
1323 #ifdef QDIO_PERFORMANCE_STATS
1324 perf_stats
.tl_runs
++;
1325 #endif /* QDIO_PERFORMANCE_STATS */
1327 tiqdio_inbound_checks();
1330 /********************* GENERAL HELPER_ROUTINES ***********************/
1333 qdio_release_irq_memory(struct qdio_irq
*irq_ptr
)
1337 for (i
=0;i
<QDIO_MAX_QUEUES_PER_IRQ
;i
++) {
1338 if (!irq_ptr
->input_qs
[i
])
1341 if (irq_ptr
->input_qs
[i
]->slib
)
1342 kfree(irq_ptr
->input_qs
[i
]->slib
);
1343 kfree(irq_ptr
->input_qs
[i
]);
1346 if (!irq_ptr
->output_qs
[i
])
1349 if (irq_ptr
->output_qs
[i
]->slib
)
1350 kfree(irq_ptr
->output_qs
[i
]->slib
);
1351 kfree(irq_ptr
->output_qs
[i
]);
1354 kfree(irq_ptr
->qdr
);
1359 qdio_set_impl_params(struct qdio_irq
*irq_ptr
,
1360 unsigned int qib_param_field_format
,
1361 /* pointer to 128 bytes or NULL, if no param field */
1362 unsigned char *qib_param_field
,
1363 /* pointer to no_queues*128 words of data or NULL */
1364 unsigned int no_input_qs
,
1365 unsigned int no_output_qs
,
1366 unsigned long *input_slib_elements
,
1367 unsigned long *output_slib_elements
)
1374 irq_ptr
->qib
.pfmt
=qib_param_field_format
;
1375 if (qib_param_field
)
1376 memcpy(irq_ptr
->qib
.parm
,qib_param_field
,
1377 QDIO_MAX_BUFFERS_PER_Q
);
1379 if (input_slib_elements
)
1380 for (i
=0;i
<no_input_qs
;i
++) {
1381 for (j
=0;j
<QDIO_MAX_BUFFERS_PER_Q
;j
++)
1382 irq_ptr
->input_qs
[i
]->slib
->slibe
[j
].parms
=
1383 input_slib_elements
[
1384 i
*QDIO_MAX_BUFFERS_PER_Q
+j
];
1386 if (output_slib_elements
)
1387 for (i
=0;i
<no_output_qs
;i
++) {
1388 for (j
=0;j
<QDIO_MAX_BUFFERS_PER_Q
;j
++)
1389 irq_ptr
->output_qs
[i
]->slib
->slibe
[j
].parms
=
1390 output_slib_elements
[
1391 i
*QDIO_MAX_BUFFERS_PER_Q
+j
];
1396 qdio_alloc_qs(struct qdio_irq
*irq_ptr
,
1397 int no_input_qs
, int no_output_qs
)
1403 for (i
=0;i
<no_input_qs
;i
++) {
1404 q
=kmalloc(sizeof(struct qdio_q
),GFP_KERNEL
);
1407 QDIO_PRINT_ERR("kmalloc of q failed!\n");
1411 memset(q
,0,sizeof(struct qdio_q
));
1413 q
->slib
=kmalloc(PAGE_SIZE
,GFP_KERNEL
);
1415 QDIO_PRINT_ERR("kmalloc of slib failed!\n");
1419 irq_ptr
->input_qs
[i
]=q
;
1422 for (i
=0;i
<no_output_qs
;i
++) {
1423 q
=kmalloc(sizeof(struct qdio_q
),GFP_KERNEL
);
1429 memset(q
,0,sizeof(struct qdio_q
));
1431 q
->slib
=kmalloc(PAGE_SIZE
,GFP_KERNEL
);
1433 QDIO_PRINT_ERR("kmalloc of slib failed!\n");
1437 irq_ptr
->output_qs
[i
]=q
;
1446 qdio_fill_qs(struct qdio_irq
*irq_ptr
, struct ccw_device
*cdev
,
1447 int no_input_qs
, int no_output_qs
,
1448 qdio_handler_t
*input_handler
,
1449 qdio_handler_t
*output_handler
,
1450 unsigned long int_parm
,int q_format
,
1451 unsigned long flags
,
1452 void **inbound_sbals_array
,
1453 void **outbound_sbals_array
)
1457 char dbf_text
[20]; /* see qdio_initialize */
1461 sprintf(dbf_text
,"qfqs%4x",cdev
->private->irq
);
1462 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
1463 for (i
=0;i
<no_input_qs
;i
++) {
1464 q
=irq_ptr
->input_qs
[i
];
1466 memset(q
,0,((char*)&q
->slib
)-((char*)q
));
1467 sprintf(dbf_text
,"in-q%4x",i
);
1468 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
1469 QDIO_DBF_HEX0(0,setup
,&q
,sizeof(void*));
1471 memset(q
->slib
,0,PAGE_SIZE
);
1472 q
->sl
=(struct sl
*)(((char*)q
->slib
)+PAGE_SIZE
/2);
1476 for (j
=0;j
<QDIO_MAX_BUFFERS_PER_Q
;j
++)
1477 q
->sbal
[j
]=*(inbound_sbals_array
++);
1479 q
->queue_type
=q_format
;
1480 q
->int_parm
=int_parm
;
1481 q
->irq
=irq_ptr
->irq
;
1482 q
->irq_ptr
= irq_ptr
;
1487 q
->first_to_check
=0;
1489 q
->handler
=input_handler
;
1490 q
->dev_st_chg_ind
=irq_ptr
->dev_st_chg_ind
;
1492 q
->tasklet
.data
=(unsigned long)q
;
1493 /* q->is_thinint_q isn't valid at this time, but
1494 * irq_ptr->is_thinint_irq is */
1495 q
->tasklet
.func
=(void(*)(unsigned long))
1496 ((irq_ptr
->is_thinint_irq
)?&tiqdio_inbound_processing
:
1497 &qdio_inbound_processing
);
1499 /* actually this is not used for inbound queues. yet. */
1500 atomic_set(&q
->busy_siga_counter
,0);
1501 q
->timing
.busy_start
=0;
1503 /* for (j=0;j<QDIO_STATS_NUMBER;j++)
1504 q->timing.last_transfer_times[j]=(qdio_get_micros()/
1505 QDIO_STATS_NUMBER)*j;
1506 q->timing.last_transfer_index=QDIO_STATS_NUMBER-1;
1510 if (i
>0) irq_ptr
->input_qs
[i
-1]->slib
->nsliba
=
1511 (unsigned long)(q
->slib
);
1512 q
->slib
->sla
=(unsigned long)(q
->sl
);
1513 q
->slib
->slsba
=(unsigned long)(&q
->slsb
.acc
.val
[0]);
1516 for (j
=0;j
<QDIO_MAX_BUFFERS_PER_Q
;j
++)
1517 q
->sl
->element
[j
].sbal
=(unsigned long)(q
->sbal
[j
]);
1519 QDIO_DBF_TEXT2(0,setup
,"sl-sb-b0");
1521 QDIO_DBF_HEX2(0,setup
,&ptr
,sizeof(void*));
1522 ptr
=(void*)&q
->slsb
;
1523 QDIO_DBF_HEX2(0,setup
,&ptr
,sizeof(void*));
1524 ptr
=(void*)q
->sbal
[0];
1525 QDIO_DBF_HEX2(0,setup
,&ptr
,sizeof(void*));
1528 for (j
=0;j
<QDIO_MAX_BUFFERS_PER_Q
;j
++) {
1529 set_slsb(&q
->slsb
.acc
.val
[j
],
1530 SLSB_P_INPUT_NOT_INIT
);
1531 /* q->sbal[j]->element[1].sbalf.i1.key=QDIO_STORAGE_KEY;*/
1535 for (i
=0;i
<no_output_qs
;i
++) {
1536 q
=irq_ptr
->output_qs
[i
];
1537 memset(q
,0,((char*)&q
->slib
)-((char*)q
));
1539 sprintf(dbf_text
,"outq%4x",i
);
1540 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
1541 QDIO_DBF_HEX0(0,setup
,&q
,sizeof(void*));
1543 memset(q
->slib
,0,PAGE_SIZE
);
1544 q
->sl
=(struct sl
*)(((char*)q
->slib
)+PAGE_SIZE
/2);
1548 for (j
=0;j
<QDIO_MAX_BUFFERS_PER_Q
;j
++)
1549 q
->sbal
[j
]=*(outbound_sbals_array
++);
1551 q
->queue_type
=q_format
;
1552 q
->int_parm
=int_parm
;
1554 q
->irq
=irq_ptr
->irq
;
1556 q
->irq_ptr
= irq_ptr
;
1559 q
->first_to_check
=0;
1561 q
->handler
=output_handler
;
1563 q
->tasklet
.data
=(unsigned long)q
;
1564 q
->tasklet
.func
=(void(*)(unsigned long))
1565 &qdio_outbound_processing
;
1567 atomic_set(&q
->busy_siga_counter
,0);
1568 q
->timing
.busy_start
=0;
1571 if (i
>0) irq_ptr
->output_qs
[i
-1]->slib
->nsliba
=
1572 (unsigned long)(q
->slib
);
1573 q
->slib
->sla
=(unsigned long)(q
->sl
);
1574 q
->slib
->slsba
=(unsigned long)(&q
->slsb
.acc
.val
[0]);
1577 for (j
=0;j
<QDIO_MAX_BUFFERS_PER_Q
;j
++)
1578 q
->sl
->element
[j
].sbal
=(unsigned long)(q
->sbal
[j
]);
1580 QDIO_DBF_TEXT2(0,setup
,"sl-sb-b0");
1582 QDIO_DBF_HEX2(0,setup
,&ptr
,sizeof(void*));
1583 ptr
=(void*)&q
->slsb
;
1584 QDIO_DBF_HEX2(0,setup
,&ptr
,sizeof(void*));
1585 ptr
=(void*)q
->sbal
[0];
1586 QDIO_DBF_HEX2(0,setup
,&ptr
,sizeof(void*));
1589 for (j
=0;j
<QDIO_MAX_BUFFERS_PER_Q
;j
++) {
1590 set_slsb(&q
->slsb
.acc
.val
[j
],
1591 SLSB_P_OUTPUT_NOT_INIT
);
1592 /* q->sbal[j]->element[1].sbalf.i1.key=QDIO_STORAGE_KEY;*/
1598 qdio_fill_thresholds(struct qdio_irq
*irq_ptr
,
1599 unsigned int no_input_qs
,
1600 unsigned int no_output_qs
,
1601 unsigned int min_input_threshold
,
1602 unsigned int max_input_threshold
,
1603 unsigned int min_output_threshold
,
1604 unsigned int max_output_threshold
)
1609 for (i
=0;i
<no_input_qs
;i
++) {
1610 q
=irq_ptr
->input_qs
[i
];
1611 q
->timing
.threshold
=max_input_threshold
;
1612 /* for (j=0;j<QDIO_STATS_CLASSES;j++) {
1613 q->threshold_classes[j].threshold=
1614 min_input_threshold+
1615 (max_input_threshold-min_input_threshold)/
1618 qdio_use_thresholds(q,QDIO_STATS_CLASSES/2);*/
1620 for (i
=0;i
<no_output_qs
;i
++) {
1621 q
=irq_ptr
->output_qs
[i
];
1622 q
->timing
.threshold
=max_output_threshold
;
1623 /* for (j=0;j<QDIO_STATS_CLASSES;j++) {
1624 q->threshold_classes[j].threshold=
1625 min_output_threshold+
1626 (max_output_threshold-min_output_threshold)/
1629 qdio_use_thresholds(q,QDIO_STATS_CLASSES/2);*/
1634 tiqdio_thinint_handler(void)
1636 QDIO_DBF_TEXT4(0,trace
,"thin_int");
1638 #ifdef QDIO_PERFORMANCE_STATS
1639 perf_stats
.thinints
++;
1640 perf_stats
.start_time_inbound
=NOW
;
1641 #endif /* QDIO_PERFORMANCE_STATS */
1643 /* SVS only when needed:
1644 * issue SVS to benefit from iqdio interrupt avoidance
1645 * (SVS clears AISOI)*/
1647 tiqdio_clear_global_summary();
1649 tiqdio_inbound_checks();
1654 qdio_set_state(struct qdio_irq
*irq_ptr
, enum qdio_irq_states state
)
1657 #ifdef CONFIG_QDIO_DEBUG
1660 QDIO_DBF_TEXT5(0,trace
,"newstate");
1661 sprintf(dbf_text
,"%4x%4x",irq_ptr
->irq
,state
);
1662 QDIO_DBF_TEXT5(0,trace
,dbf_text
);
1663 #endif /* CONFIG_QDIO_DEBUG */
1665 irq_ptr
->state
=state
;
1666 for (i
=0;i
<irq_ptr
->no_input_qs
;i
++)
1667 irq_ptr
->input_qs
[i
]->state
=state
;
1668 for (i
=0;i
<irq_ptr
->no_output_qs
;i
++)
1669 irq_ptr
->output_qs
[i
]->state
=state
;
1674 qdio_irq_check_sense(int irq
, struct irb
*irb
)
1678 if (irb
->esw
.esw0
.erw
.cons
) {
1679 sprintf(dbf_text
,"sens%4x",irq
);
1680 QDIO_DBF_TEXT2(1,trace
,dbf_text
);
1681 QDIO_DBF_HEX0(0,sense
,irb
,QDIO_DBF_SENSE_LEN
);
1683 QDIO_PRINT_WARN("sense data available on qdio channel.\n");
1684 HEXDUMP16(WARN
,"irb: ",irb
);
1685 HEXDUMP16(WARN
,"sense data: ",irb
->ecw
);
1691 qdio_handle_pci(struct qdio_irq
*irq_ptr
)
1696 #ifdef QDIO_PERFORMANCE_STATS
1698 perf_stats
.start_time_inbound
=NOW
;
1699 #endif /* QDIO_PERFORMANCE_STATS */
1700 for (i
=0;i
<irq_ptr
->no_input_qs
;i
++) {
1701 q
=irq_ptr
->input_qs
[i
];
1702 if (q
->is_input_q
&QDIO_FLAG_NO_INPUT_INTERRUPT_CONTEXT
)
1705 #ifdef QDIO_PERFORMANCE_STATS
1706 perf_stats
.tl_runs
--;
1707 #endif /* QDIO_PERFORMANCE_STATS */
1708 __qdio_inbound_processing(q
);
1711 if (!irq_ptr
->hydra_gives_outbound_pcis
)
1713 for (i
=0;i
<irq_ptr
->no_output_qs
;i
++) {
1714 q
=irq_ptr
->output_qs
[i
];
1715 #ifdef QDIO_PERFORMANCE_STATS
1716 perf_stats
.tl_runs
--;
1717 #endif /* QDIO_PERFORMANCE_STATS */
1718 if (qdio_is_outbound_q_done(q
))
1720 if (!irq_ptr
->sync_done_on_outb_pcis
)
1722 __qdio_outbound_processing(q
);
1726 static void qdio_establish_handle_irq(struct ccw_device
*, int, int);
1729 qdio_handle_activate_check(struct ccw_device
*cdev
, unsigned long intparm
,
1730 int cstat
, int dstat
)
1732 struct qdio_irq
*irq_ptr
;
1736 irq_ptr
= cdev
->private->qdio_data
;
1738 QDIO_DBF_TEXT2(1, trace
, "ick2");
1739 sprintf(dbf_text
,"%s", cdev
->dev
.bus_id
);
1740 QDIO_DBF_TEXT2(1,trace
,dbf_text
);
1741 QDIO_DBF_HEX2(0,trace
,&intparm
,sizeof(int));
1742 QDIO_DBF_HEX2(0,trace
,&dstat
,sizeof(int));
1743 QDIO_DBF_HEX2(0,trace
,&cstat
,sizeof(int));
1744 QDIO_PRINT_ERR("received check condition on activate " \
1745 "queues on device %s (cs=x%x, ds=x%x).\n",
1746 cdev
->dev
.bus_id
, cstat
, dstat
);
1747 if (irq_ptr
->no_input_qs
) {
1748 q
=irq_ptr
->input_qs
[0];
1749 } else if (irq_ptr
->no_output_qs
) {
1750 q
=irq_ptr
->output_qs
[0];
1752 QDIO_PRINT_ERR("oops... no queue registered for device %s!?\n",
1754 goto omit_handler_call
;
1756 q
->handler(q
->cdev
,QDIO_STATUS_ACTIVATE_CHECK_CONDITION
|
1757 QDIO_STATUS_LOOK_FOR_ERROR
,
1758 0,0,0,-1,-1,q
->int_parm
);
1760 qdio_set_state(irq_ptr
,QDIO_IRQ_STATE_STOPPED
);
1765 qdio_call_shutdown(void *data
)
1767 struct ccw_device
*cdev
;
1769 cdev
= (struct ccw_device
*)data
;
1770 qdio_shutdown(cdev
, QDIO_FLAG_CLEANUP_USING_CLEAR
);
1771 put_device(&cdev
->dev
);
1775 qdio_timeout_handler(struct ccw_device
*cdev
)
1777 struct qdio_irq
*irq_ptr
;
1780 QDIO_DBF_TEXT2(0, trace
, "qtoh");
1781 sprintf(dbf_text
, "%s", cdev
->dev
.bus_id
);
1782 QDIO_DBF_TEXT2(0, trace
, dbf_text
);
1784 irq_ptr
= cdev
->private->qdio_data
;
1785 sprintf(dbf_text
, "state:%d", irq_ptr
->state
);
1786 QDIO_DBF_TEXT2(0, trace
, dbf_text
);
1788 switch (irq_ptr
->state
) {
1789 case QDIO_IRQ_STATE_INACTIVE
:
1790 QDIO_PRINT_ERR("establish queues on irq %04x: timed out\n",
1792 QDIO_DBF_TEXT2(1,setup
,"eq:timeo");
1793 qdio_set_state(irq_ptr
, QDIO_IRQ_STATE_ERR
);
1795 case QDIO_IRQ_STATE_CLEANUP
:
1796 QDIO_PRINT_INFO("Did not get interrupt on cleanup, irq=0x%x.\n",
1798 qdio_set_state(irq_ptr
, QDIO_IRQ_STATE_ERR
);
1800 case QDIO_IRQ_STATE_ESTABLISHED
:
1801 case QDIO_IRQ_STATE_ACTIVE
:
1802 /* I/O has been terminated by common I/O layer. */
1803 QDIO_PRINT_INFO("Queues on irq %04x killed by cio.\n",
1805 QDIO_DBF_TEXT2(1, trace
, "cio:term");
1806 qdio_set_state(irq_ptr
, QDIO_IRQ_STATE_STOPPED
);
1807 if (get_device(&cdev
->dev
)) {
1808 /* Can't call shutdown from interrupt context. */
1809 PREPARE_WORK(&cdev
->private->kick_work
,
1810 qdio_call_shutdown
, (void *)cdev
);
1811 queue_work(ccw_device_work
, &cdev
->private->kick_work
);
1817 ccw_device_set_timeout(cdev
, 0);
1818 wake_up(&cdev
->private->wait_q
);
1822 qdio_handler(struct ccw_device
*cdev
, unsigned long intparm
, struct irb
*irb
)
1824 struct qdio_irq
*irq_ptr
;
1828 #ifdef CONFIG_QDIO_DEBUG
1829 QDIO_DBF_TEXT4(0, trace
, "qint");
1830 sprintf(dbf_text
, "%s", cdev
->dev
.bus_id
);
1831 QDIO_DBF_TEXT4(0, trace
, dbf_text
);
1832 #endif /* CONFIG_QDIO_DEBUG */
1835 QDIO_PRINT_ERR("got unsolicited interrupt in qdio " \
1836 "handler, device %s\n", cdev
->dev
.bus_id
);
1840 irq_ptr
= cdev
->private->qdio_data
;
1842 QDIO_DBF_TEXT2(1, trace
, "uint");
1843 sprintf(dbf_text
,"%s", cdev
->dev
.bus_id
);
1844 QDIO_DBF_TEXT2(1,trace
,dbf_text
);
1845 QDIO_PRINT_ERR("received interrupt on unused device %s!\n",
1851 /* Currently running i/o is in error. */
1852 switch (PTR_ERR(irb
)) {
1854 QDIO_PRINT_ERR("i/o error on device %s\n",
1858 qdio_timeout_handler(cdev
);
1861 QDIO_PRINT_ERR("unknown error state %ld on device %s\n",
1862 PTR_ERR(irb
), cdev
->dev
.bus_id
);
1867 qdio_irq_check_sense(irq_ptr
->irq
, irb
);
1869 #ifdef CONFIG_QDIO_DEBUG
1870 sprintf(dbf_text
, "state:%d", irq_ptr
->state
);
1871 QDIO_DBF_TEXT4(0, trace
, dbf_text
);
1872 #endif /* CONFIG_QDIO_DEBUG */
1874 cstat
= irb
->scsw
.cstat
;
1875 dstat
= irb
->scsw
.dstat
;
1877 switch (irq_ptr
->state
) {
1878 case QDIO_IRQ_STATE_INACTIVE
:
1879 qdio_establish_handle_irq(cdev
, cstat
, dstat
);
1882 case QDIO_IRQ_STATE_CLEANUP
:
1883 qdio_set_state(irq_ptr
, QDIO_IRQ_STATE_INACTIVE
);
1886 case QDIO_IRQ_STATE_ESTABLISHED
:
1887 case QDIO_IRQ_STATE_ACTIVE
:
1888 if (cstat
& SCHN_STAT_PCI
) {
1889 qdio_handle_pci(irq_ptr
);
1893 if ((cstat
&~SCHN_STAT_PCI
)||dstat
) {
1894 qdio_handle_activate_check(cdev
, intparm
, cstat
, dstat
);
1898 QDIO_PRINT_ERR("got interrupt for queues in state %d on " \
1900 irq_ptr
->state
, cdev
->dev
.bus_id
);
1902 wake_up(&cdev
->private->wait_q
);
1907 qdio_synchronize(struct ccw_device
*cdev
, unsigned int flags
,
1908 unsigned int queue_number
)
1912 struct qdio_irq
*irq_ptr
;
1914 #ifdef CONFIG_QDIO_DEBUG
1915 char dbf_text
[15]="SyncXXXX";
1918 irq_ptr
= cdev
->private->qdio_data
;
1922 #ifdef CONFIG_QDIO_DEBUG
1923 *((int*)(&dbf_text
[4])) = irq_ptr
->irq
;
1924 QDIO_DBF_HEX4(0,trace
,dbf_text
,QDIO_DBF_TRACE_LEN
);
1925 *((int*)(&dbf_text
[0]))=flags
;
1926 *((int*)(&dbf_text
[4]))=queue_number
;
1927 QDIO_DBF_HEX4(0,trace
,dbf_text
,QDIO_DBF_TRACE_LEN
);
1928 #endif /* CONFIG_QDIO_DEBUG */
1930 if (flags
&QDIO_FLAG_SYNC_INPUT
) {
1931 q
=irq_ptr
->input_qs
[queue_number
];
1934 cc
= do_siga_sync(q
->irq
, 0, q
->mask
);
1935 } else if (flags
&QDIO_FLAG_SYNC_OUTPUT
) {
1936 q
=irq_ptr
->output_qs
[queue_number
];
1939 cc
= do_siga_sync(q
->irq
, q
->mask
, 0);
1945 QDIO_DBF_HEX3(0,trace
,&ptr
,sizeof(int));
1950 static unsigned char
1951 qdio_check_siga_needs(int sch
)
1954 unsigned char qdioac
;
1957 struct chsc_header request
;
1963 struct chsc_header response
;
1978 ssqd_area
= (void *)get_zeroed_page(GFP_KERNEL
| GFP_DMA
);
1980 QDIO_PRINT_WARN("Could not get memory for chsc. Using all " \
1981 "SIGAs for sch x%x.\n", sch
);
1982 return CHSC_FLAG_SIGA_INPUT_NECESSARY
||
1983 CHSC_FLAG_SIGA_OUTPUT_NECESSARY
||
1984 CHSC_FLAG_SIGA_SYNC_NECESSARY
; /* all flags set */
1986 ssqd_area
->request
= (struct chsc_header
) {
1991 ssqd_area
->first_sch
= sch
;
1992 ssqd_area
->last_sch
= sch
;
1994 result
=chsc(ssqd_area
);
1997 QDIO_PRINT_WARN("CHSC returned cc %i. Using all " \
1998 "SIGAs for sch x%x.\n",
2000 qdioac
= CHSC_FLAG_SIGA_INPUT_NECESSARY
||
2001 CHSC_FLAG_SIGA_OUTPUT_NECESSARY
||
2002 CHSC_FLAG_SIGA_SYNC_NECESSARY
; /* all flags set */
2006 if (ssqd_area
->response
.code
!= QDIO_CHSC_RESPONSE_CODE_OK
) {
2007 QDIO_PRINT_WARN("response upon checking SIGA needs " \
2008 "is 0x%x. Using all SIGAs for sch x%x.\n",
2009 ssqd_area
->response
.code
, sch
);
2010 qdioac
= CHSC_FLAG_SIGA_INPUT_NECESSARY
||
2011 CHSC_FLAG_SIGA_OUTPUT_NECESSARY
||
2012 CHSC_FLAG_SIGA_SYNC_NECESSARY
; /* all flags set */
2015 if (!(ssqd_area
->flags
& CHSC_FLAG_QDIO_CAPABILITY
) ||
2016 !(ssqd_area
->flags
& CHSC_FLAG_VALIDITY
) ||
2017 (ssqd_area
->sch
!= sch
)) {
2018 QDIO_PRINT_WARN("huh? problems checking out sch x%x... " \
2019 "using all SIGAs.\n",sch
);
2020 qdioac
= CHSC_FLAG_SIGA_INPUT_NECESSARY
|
2021 CHSC_FLAG_SIGA_OUTPUT_NECESSARY
|
2022 CHSC_FLAG_SIGA_SYNC_NECESSARY
; /* worst case */
2026 qdioac
= ssqd_area
->qdioac
;
2028 free_page ((unsigned long) ssqd_area
);
2033 tiqdio_check_chsc_availability(void)
2037 if (!css_characteristics_avail
)
2040 /* Check for bit 41. */
2041 if (!css_general_characteristics
.aif
) {
2042 QDIO_PRINT_WARN("Adapter interruption facility not " \
2047 /* Check for bits 107 and 108. */
2048 if (!css_chsc_characteristics
.scssc
||
2049 !css_chsc_characteristics
.scsscf
) {
2050 QDIO_PRINT_WARN("Set Chan Subsys. Char. & Fast-CHSCs " \
2051 "not available.\n");
2055 /* Check for OSA/FCP thin interrupts (bit 67). */
2056 hydra_thinints
= css_general_characteristics
.aif_osa
;
2057 sprintf(dbf_text
,"hydrati%1x", hydra_thinints
);
2058 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2060 /* Check for aif time delay disablement fac (bit 56). If installed,
2061 * omit svs even under lpar (good point by rick again) */
2062 omit_svs
= css_general_characteristics
.aif_tdd
;
2063 sprintf(dbf_text
,"omitsvs%1x", omit_svs
);
2064 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2070 tiqdio_set_subchannel_ind(struct qdio_irq
*irq_ptr
, int reset_to_zero
)
2072 unsigned long real_addr_local_summary_bit
;
2073 unsigned long real_addr_dev_st_chg_ind
;
2077 unsigned int resp_code
;
2081 struct chsc_header request
;
2086 u64 summary_indicator_addr
;
2087 u64 subchannel_indicator_addr
;
2092 u32 word_with_d_bit
;
2093 /* set to 0x10000000 to enable
2094 * time delay disablement facility */
2097 u32 reserved6
[1004];
2098 struct chsc_header response
;
2102 if (!irq_ptr
->is_thinint_irq
)
2105 if (reset_to_zero
) {
2106 real_addr_local_summary_bit
=0;
2107 real_addr_dev_st_chg_ind
=0;
2109 real_addr_local_summary_bit
=
2110 virt_to_phys((volatile void *)indicators
);
2111 real_addr_dev_st_chg_ind
=
2112 virt_to_phys((volatile void *)irq_ptr
->dev_st_chg_ind
);
2115 scssc_area
= (void *)get_zeroed_page(GFP_KERNEL
| GFP_DMA
);
2117 QDIO_PRINT_WARN("No memory for setting indicators on " \
2118 "subchannel x%x.\n", irq_ptr
->irq
);
2121 scssc_area
->request
= (struct chsc_header
) {
2125 scssc_area
->operation_code
= 0;
2127 scssc_area
->summary_indicator_addr
= real_addr_local_summary_bit
;
2128 scssc_area
->subchannel_indicator_addr
= real_addr_dev_st_chg_ind
;
2129 scssc_area
->ks
= QDIO_STORAGE_KEY
;
2130 scssc_area
->kc
= QDIO_STORAGE_KEY
;
2131 scssc_area
->isc
= TIQDIO_THININT_ISC
;
2132 scssc_area
->subsystem_id
= (1<<16) + irq_ptr
->irq
;
2133 /* enables the time delay disablement facility. Don't care
2134 * whether it is really there (i.e. we haven't checked for
2136 if (css_general_characteristics
.aif_tdd
)
2137 scssc_area
->word_with_d_bit
= 0x10000000;
2139 QDIO_PRINT_WARN("Time delay disablement facility " \
2144 result
= chsc(scssc_area
);
2146 QDIO_PRINT_WARN("could not set indicators on irq x%x, " \
2147 "cc=%i.\n",irq_ptr
->irq
,result
);
2152 resp_code
= scssc_area
->response
.code
;
2153 if (resp_code
!=QDIO_CHSC_RESPONSE_CODE_OK
) {
2154 QDIO_PRINT_WARN("response upon setting indicators " \
2155 "is 0x%x.\n",resp_code
);
2156 sprintf(dbf_text
,"sidR%4x",resp_code
);
2157 QDIO_DBF_TEXT1(0,trace
,dbf_text
);
2158 QDIO_DBF_TEXT1(0,setup
,dbf_text
);
2159 ptr
=&scssc_area
->response
;
2160 QDIO_DBF_HEX2(1,setup
,&ptr
,QDIO_DBF_SETUP_LEN
);
2165 QDIO_DBF_TEXT2(0,setup
,"setscind");
2166 QDIO_DBF_HEX2(0,setup
,&real_addr_local_summary_bit
,
2167 sizeof(unsigned long));
2168 QDIO_DBF_HEX2(0,setup
,&real_addr_dev_st_chg_ind
,sizeof(unsigned long));
2171 free_page ((unsigned long) scssc_area
);
2177 tiqdio_set_delay_target(struct qdio_irq
*irq_ptr
, unsigned long delay_target
)
2179 unsigned int resp_code
;
2185 struct chsc_header request
;
2192 u32 reserved5
[1009];
2193 struct chsc_header response
;
2197 if (!irq_ptr
->is_thinint_irq
)
2200 scsscf_area
= (void *)get_zeroed_page(GFP_KERNEL
| GFP_DMA
);
2202 QDIO_PRINT_WARN("No memory for setting delay target on " \
2203 "subchannel x%x.\n", irq_ptr
->irq
);
2206 scsscf_area
->request
= (struct chsc_header
) {
2211 scsscf_area
->delay_target
= delay_target
<<16;
2213 result
=chsc(scsscf_area
);
2215 QDIO_PRINT_WARN("could not set delay target on irq x%x, " \
2216 "cc=%i. Continuing.\n",irq_ptr
->irq
,result
);
2221 resp_code
= scsscf_area
->response
.code
;
2222 if (resp_code
!=QDIO_CHSC_RESPONSE_CODE_OK
) {
2223 QDIO_PRINT_WARN("response upon setting delay target " \
2224 "is 0x%x. Continuing.\n",resp_code
);
2225 sprintf(dbf_text
,"sdtR%4x",resp_code
);
2226 QDIO_DBF_TEXT1(0,trace
,dbf_text
);
2227 QDIO_DBF_TEXT1(0,setup
,dbf_text
);
2228 ptr
=&scsscf_area
->response
;
2229 QDIO_DBF_HEX2(1,trace
,&ptr
,QDIO_DBF_TRACE_LEN
);
2231 QDIO_DBF_TEXT2(0,trace
,"delytrgt");
2232 QDIO_DBF_HEX2(0,trace
,&delay_target
,sizeof(unsigned long));
2233 result
= 0; /* not critical */
2235 free_page ((unsigned long) scsscf_area
);
2240 qdio_cleanup(struct ccw_device
*cdev
, int how
)
2242 struct qdio_irq
*irq_ptr
;
2246 irq_ptr
= cdev
->private->qdio_data
;
2250 sprintf(dbf_text
,"qcln%4x",irq_ptr
->irq
);
2251 QDIO_DBF_TEXT1(0,trace
,dbf_text
);
2252 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2254 rc
= qdio_shutdown(cdev
, how
);
2255 if ((rc
== 0) || (rc
== -EINPROGRESS
))
2256 rc
= qdio_free(cdev
);
2261 qdio_shutdown(struct ccw_device
*cdev
, int how
)
2263 struct qdio_irq
*irq_ptr
;
2267 unsigned long flags
;
2271 irq_ptr
= cdev
->private->qdio_data
;
2275 down(&irq_ptr
->setting_up_sema
);
2277 sprintf(dbf_text
,"qsqs%4x",irq_ptr
->irq
);
2278 QDIO_DBF_TEXT1(0,trace
,dbf_text
);
2279 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2281 /* mark all qs as uninteresting */
2282 for (i
=0;i
<irq_ptr
->no_input_qs
;i
++)
2283 atomic_set(&irq_ptr
->input_qs
[i
]->is_in_shutdown
,1);
2285 for (i
=0;i
<irq_ptr
->no_output_qs
;i
++)
2286 atomic_set(&irq_ptr
->output_qs
[i
]->is_in_shutdown
,1);
2288 tasklet_kill(&tiqdio_tasklet
);
2290 for (i
=0;i
<irq_ptr
->no_input_qs
;i
++) {
2291 qdio_unmark_q(irq_ptr
->input_qs
[i
]);
2292 tasklet_kill(&irq_ptr
->input_qs
[i
]->tasklet
);
2293 wait_event_interruptible_timeout(cdev
->private->wait_q
,
2294 !atomic_read(&irq_ptr
->
2297 QDIO_NO_USE_COUNT_TIMEOUT
);
2298 if (atomic_read(&irq_ptr
->input_qs
[i
]->use_count
))
2299 result
=-EINPROGRESS
;
2302 for (i
=0;i
<irq_ptr
->no_output_qs
;i
++) {
2303 tasklet_kill(&irq_ptr
->output_qs
[i
]->tasklet
);
2304 wait_event_interruptible_timeout(cdev
->private->wait_q
,
2305 !atomic_read(&irq_ptr
->
2308 QDIO_NO_USE_COUNT_TIMEOUT
);
2309 if (atomic_read(&irq_ptr
->output_qs
[i
]->use_count
))
2310 result
=-EINPROGRESS
;
2313 /* cleanup subchannel */
2314 spin_lock_irqsave(get_ccwdev_lock(cdev
),flags
);
2315 if (how
&QDIO_FLAG_CLEANUP_USING_CLEAR
) {
2316 rc
= ccw_device_clear(cdev
, QDIO_DOING_CLEANUP
);
2317 timeout
=QDIO_CLEANUP_CLEAR_TIMEOUT
;
2318 } else if (how
&QDIO_FLAG_CLEANUP_USING_HALT
) {
2319 rc
= ccw_device_halt(cdev
, QDIO_DOING_CLEANUP
);
2320 timeout
=QDIO_CLEANUP_HALT_TIMEOUT
;
2321 } else { /* default behaviour */
2322 rc
= ccw_device_halt(cdev
, QDIO_DOING_CLEANUP
);
2323 timeout
=QDIO_CLEANUP_HALT_TIMEOUT
;
2325 if (rc
== -ENODEV
) {
2326 /* No need to wait for device no longer present. */
2327 qdio_set_state(irq_ptr
, QDIO_IRQ_STATE_INACTIVE
);
2328 spin_unlock_irqrestore(get_ccwdev_lock(cdev
), flags
);
2329 } else if (((void *)cdev
->handler
!= (void *)qdio_handler
) && rc
== 0) {
2331 * Whoever put another handler there, has to cope with the
2332 * interrupt theirself. Might happen if qdio_shutdown was
2333 * called on already shutdown queues, but this shouldn't have
2336 qdio_set_state(irq_ptr
, QDIO_IRQ_STATE_INACTIVE
);
2337 spin_unlock_irqrestore(get_ccwdev_lock(cdev
), flags
);
2338 } else if (rc
== 0) {
2339 qdio_set_state(irq_ptr
, QDIO_IRQ_STATE_CLEANUP
);
2340 ccw_device_set_timeout(cdev
, timeout
);
2341 spin_unlock_irqrestore(get_ccwdev_lock(cdev
),flags
);
2343 wait_event(cdev
->private->wait_q
,
2344 irq_ptr
->state
== QDIO_IRQ_STATE_INACTIVE
||
2345 irq_ptr
->state
== QDIO_IRQ_STATE_ERR
);
2347 QDIO_PRINT_INFO("ccw_device_{halt,clear} returned %d for "
2348 "device %s\n", result
, cdev
->dev
.bus_id
);
2349 spin_unlock_irqrestore(get_ccwdev_lock(cdev
), flags
);
2353 if (irq_ptr
->is_thinint_irq
) {
2354 qdio_put_indicator((__u32
*)irq_ptr
->dev_st_chg_ind
);
2355 tiqdio_set_subchannel_ind(irq_ptr
,1);
2356 /* reset adapter interrupt indicators */
2359 /* exchange int handlers, if necessary */
2360 if ((void*)cdev
->handler
== (void*)qdio_handler
)
2361 cdev
->handler
=irq_ptr
->original_int_handler
;
2363 /* Ignore errors. */
2364 qdio_set_state(irq_ptr
, QDIO_IRQ_STATE_INACTIVE
);
2365 ccw_device_set_timeout(cdev
, 0);
2367 up(&irq_ptr
->setting_up_sema
);
2372 qdio_free(struct ccw_device
*cdev
)
2374 struct qdio_irq
*irq_ptr
;
2377 irq_ptr
= cdev
->private->qdio_data
;
2381 down(&irq_ptr
->setting_up_sema
);
2383 sprintf(dbf_text
,"qfqs%4x",irq_ptr
->irq
);
2384 QDIO_DBF_TEXT1(0,trace
,dbf_text
);
2385 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2387 cdev
->private->qdio_data
= 0;
2389 up(&irq_ptr
->setting_up_sema
);
2391 qdio_release_irq_memory(irq_ptr
);
2392 module_put(THIS_MODULE
);
2397 qdio_allocate_do_dbf(struct qdio_initialize
*init_data
)
2399 char dbf_text
[20]; /* if a printf printed out more than 8 chars */
2401 sprintf(dbf_text
,"qfmt:%x",init_data
->q_format
);
2402 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2403 QDIO_DBF_HEX0(0,setup
,init_data
->adapter_name
,8);
2404 sprintf(dbf_text
,"qpff%4x",init_data
->qib_param_field_format
);
2405 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2406 QDIO_DBF_HEX0(0,setup
,&init_data
->qib_param_field
,sizeof(char*));
2407 QDIO_DBF_HEX0(0,setup
,&init_data
->input_slib_elements
,sizeof(long*));
2408 QDIO_DBF_HEX0(0,setup
,&init_data
->output_slib_elements
,sizeof(long*));
2409 sprintf(dbf_text
,"miit%4x",init_data
->min_input_threshold
);
2410 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2411 sprintf(dbf_text
,"mait%4x",init_data
->max_input_threshold
);
2412 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2413 sprintf(dbf_text
,"miot%4x",init_data
->min_output_threshold
);
2414 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2415 sprintf(dbf_text
,"maot%4x",init_data
->max_output_threshold
);
2416 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2417 sprintf(dbf_text
,"niq:%4x",init_data
->no_input_qs
);
2418 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2419 sprintf(dbf_text
,"noq:%4x",init_data
->no_output_qs
);
2420 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2421 QDIO_DBF_HEX0(0,setup
,&init_data
->input_handler
,sizeof(void*));
2422 QDIO_DBF_HEX0(0,setup
,&init_data
->output_handler
,sizeof(void*));
2423 QDIO_DBF_HEX0(0,setup
,&init_data
->int_parm
,sizeof(long));
2424 QDIO_DBF_HEX0(0,setup
,&init_data
->flags
,sizeof(long));
2425 QDIO_DBF_HEX0(0,setup
,&init_data
->input_sbal_addr_array
,sizeof(void*));
2426 QDIO_DBF_HEX0(0,setup
,&init_data
->output_sbal_addr_array
,sizeof(void*));
2430 qdio_allocate_fill_input_desc(struct qdio_irq
*irq_ptr
, int i
, int iqfmt
)
2432 irq_ptr
->input_qs
[i
]->is_iqdio_q
= iqfmt
;
2433 irq_ptr
->input_qs
[i
]->is_thinint_q
= irq_ptr
->is_thinint_irq
;
2435 irq_ptr
->qdr
->qdf0
[i
].sliba
=(unsigned long)(irq_ptr
->input_qs
[i
]->slib
);
2437 irq_ptr
->qdr
->qdf0
[i
].sla
=(unsigned long)(irq_ptr
->input_qs
[i
]->sl
);
2439 irq_ptr
->qdr
->qdf0
[i
].slsba
=
2440 (unsigned long)(&irq_ptr
->input_qs
[i
]->slsb
.acc
.val
[0]);
2442 irq_ptr
->qdr
->qdf0
[i
].akey
=QDIO_STORAGE_KEY
;
2443 irq_ptr
->qdr
->qdf0
[i
].bkey
=QDIO_STORAGE_KEY
;
2444 irq_ptr
->qdr
->qdf0
[i
].ckey
=QDIO_STORAGE_KEY
;
2445 irq_ptr
->qdr
->qdf0
[i
].dkey
=QDIO_STORAGE_KEY
;
2449 qdio_allocate_fill_output_desc(struct qdio_irq
*irq_ptr
, int i
,
2452 irq_ptr
->output_qs
[i
]->is_iqdio_q
= iqfmt
;
2453 irq_ptr
->output_qs
[i
]->is_thinint_q
= irq_ptr
->is_thinint_irq
;
2455 irq_ptr
->qdr
->qdf0
[i
+j
].sliba
=(unsigned long)(irq_ptr
->output_qs
[i
]->slib
);
2457 irq_ptr
->qdr
->qdf0
[i
+j
].sla
=(unsigned long)(irq_ptr
->output_qs
[i
]->sl
);
2459 irq_ptr
->qdr
->qdf0
[i
+j
].slsba
=
2460 (unsigned long)(&irq_ptr
->output_qs
[i
]->slsb
.acc
.val
[0]);
2462 irq_ptr
->qdr
->qdf0
[i
+j
].akey
=QDIO_STORAGE_KEY
;
2463 irq_ptr
->qdr
->qdf0
[i
+j
].bkey
=QDIO_STORAGE_KEY
;
2464 irq_ptr
->qdr
->qdf0
[i
+j
].ckey
=QDIO_STORAGE_KEY
;
2465 irq_ptr
->qdr
->qdf0
[i
+j
].dkey
=QDIO_STORAGE_KEY
;
2470 qdio_initialize_set_siga_flags_input(struct qdio_irq
*irq_ptr
)
2474 for (i
=0;i
<irq_ptr
->no_input_qs
;i
++) {
2475 irq_ptr
->input_qs
[i
]->siga_sync
=
2476 irq_ptr
->qdioac
&CHSC_FLAG_SIGA_SYNC_NECESSARY
;
2477 irq_ptr
->input_qs
[i
]->siga_in
=
2478 irq_ptr
->qdioac
&CHSC_FLAG_SIGA_INPUT_NECESSARY
;
2479 irq_ptr
->input_qs
[i
]->siga_out
=
2480 irq_ptr
->qdioac
&CHSC_FLAG_SIGA_OUTPUT_NECESSARY
;
2481 irq_ptr
->input_qs
[i
]->siga_sync_done_on_thinints
=
2482 irq_ptr
->qdioac
&CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS
;
2483 irq_ptr
->input_qs
[i
]->hydra_gives_outbound_pcis
=
2484 irq_ptr
->hydra_gives_outbound_pcis
;
2485 irq_ptr
->input_qs
[i
]->siga_sync_done_on_outb_tis
=
2487 (CHSC_FLAG_SIGA_SYNC_DONE_ON_OUTB_PCIS
|
2488 CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS
))==
2489 (CHSC_FLAG_SIGA_SYNC_DONE_ON_OUTB_PCIS
|
2490 CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS
));
2496 qdio_initialize_set_siga_flags_output(struct qdio_irq
*irq_ptr
)
2500 for (i
=0;i
<irq_ptr
->no_output_qs
;i
++) {
2501 irq_ptr
->output_qs
[i
]->siga_sync
=
2502 irq_ptr
->qdioac
&CHSC_FLAG_SIGA_SYNC_NECESSARY
;
2503 irq_ptr
->output_qs
[i
]->siga_in
=
2504 irq_ptr
->qdioac
&CHSC_FLAG_SIGA_INPUT_NECESSARY
;
2505 irq_ptr
->output_qs
[i
]->siga_out
=
2506 irq_ptr
->qdioac
&CHSC_FLAG_SIGA_OUTPUT_NECESSARY
;
2507 irq_ptr
->output_qs
[i
]->siga_sync_done_on_thinints
=
2508 irq_ptr
->qdioac
&CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS
;
2509 irq_ptr
->output_qs
[i
]->hydra_gives_outbound_pcis
=
2510 irq_ptr
->hydra_gives_outbound_pcis
;
2511 irq_ptr
->output_qs
[i
]->siga_sync_done_on_outb_tis
=
2513 (CHSC_FLAG_SIGA_SYNC_DONE_ON_OUTB_PCIS
|
2514 CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS
))==
2515 (CHSC_FLAG_SIGA_SYNC_DONE_ON_OUTB_PCIS
|
2516 CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS
));
2522 qdio_establish_irq_check_for_errors(struct ccw_device
*cdev
, int cstat
,
2526 struct qdio_irq
*irq_ptr
;
2528 irq_ptr
= cdev
->private->qdio_data
;
2530 if (cstat
|| (dstat
& ~(DEV_STAT_CHN_END
|DEV_STAT_DEV_END
))) {
2531 sprintf(dbf_text
,"ick1%4x",irq_ptr
->irq
);
2532 QDIO_DBF_TEXT2(1,trace
,dbf_text
);
2533 QDIO_DBF_HEX2(0,trace
,&dstat
,sizeof(int));
2534 QDIO_DBF_HEX2(0,trace
,&cstat
,sizeof(int));
2535 QDIO_PRINT_ERR("received check condition on establish " \
2536 "queues on irq 0x%x (cs=x%x, ds=x%x).\n",
2537 irq_ptr
->irq
,cstat
,dstat
);
2538 qdio_set_state(irq_ptr
,QDIO_IRQ_STATE_ERR
);
2541 if (!(dstat
& DEV_STAT_DEV_END
)) {
2542 QDIO_DBF_TEXT2(1,setup
,"eq:no de");
2543 QDIO_DBF_HEX2(0,setup
,&dstat
, sizeof(dstat
));
2544 QDIO_DBF_HEX2(0,setup
,&cstat
, sizeof(cstat
));
2545 QDIO_PRINT_ERR("establish queues on irq %04x: didn't get "
2546 "device end: dstat=%02x, cstat=%02x\n",
2547 irq_ptr
->irq
, dstat
, cstat
);
2548 qdio_set_state(irq_ptr
, QDIO_IRQ_STATE_ERR
);
2552 if (dstat
& ~(DEV_STAT_CHN_END
|DEV_STAT_DEV_END
)) {
2553 QDIO_DBF_TEXT2(1,setup
,"eq:badio");
2554 QDIO_DBF_HEX2(0,setup
,&dstat
, sizeof(dstat
));
2555 QDIO_DBF_HEX2(0,setup
,&cstat
, sizeof(cstat
));
2556 QDIO_PRINT_ERR("establish queues on irq %04x: got "
2557 "the following devstat: dstat=%02x, "
2559 irq_ptr
->irq
, dstat
, cstat
);
2560 qdio_set_state(irq_ptr
, QDIO_IRQ_STATE_ERR
);
2567 qdio_establish_handle_irq(struct ccw_device
*cdev
, int cstat
, int dstat
)
2569 struct qdio_irq
*irq_ptr
;
2572 irq_ptr
= cdev
->private->qdio_data
;
2574 sprintf(dbf_text
,"qehi%4x",cdev
->private->irq
);
2575 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2576 QDIO_DBF_TEXT0(0,trace
,dbf_text
);
2578 if (qdio_establish_irq_check_for_errors(cdev
, cstat
, dstat
)) {
2579 ccw_device_set_timeout(cdev
, 0);
2583 qdio_set_state(irq_ptr
,QDIO_IRQ_STATE_ESTABLISHED
);
2584 ccw_device_set_timeout(cdev
, 0);
2588 qdio_initialize(struct qdio_initialize
*init_data
)
2593 sprintf(dbf_text
,"qini%4x",init_data
->cdev
->private->irq
);
2594 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2595 QDIO_DBF_TEXT0(0,trace
,dbf_text
);
2597 rc
= qdio_allocate(init_data
);
2599 rc
= qdio_establish(init_data
);
2601 qdio_free(init_data
->cdev
);
2609 qdio_allocate(struct qdio_initialize
*init_data
)
2611 struct qdio_irq
*irq_ptr
;
2614 sprintf(dbf_text
,"qalc%4x",init_data
->cdev
->private->irq
);
2615 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2616 QDIO_DBF_TEXT0(0,trace
,dbf_text
);
2617 if ( (init_data
->no_input_qs
>QDIO_MAX_QUEUES_PER_IRQ
) ||
2618 (init_data
->no_output_qs
>QDIO_MAX_QUEUES_PER_IRQ
) ||
2619 ((init_data
->no_input_qs
) && (!init_data
->input_handler
)) ||
2620 ((init_data
->no_output_qs
) && (!init_data
->output_handler
)) )
2623 if (!init_data
->input_sbal_addr_array
)
2626 if (!init_data
->output_sbal_addr_array
)
2629 qdio_allocate_do_dbf(init_data
);
2632 irq_ptr
=kmalloc(sizeof(struct qdio_irq
), GFP_KERNEL
| GFP_DMA
);
2634 QDIO_DBF_TEXT0(0,setup
,"irq_ptr:");
2635 QDIO_DBF_HEX0(0,setup
,&irq_ptr
,sizeof(void*));
2638 QDIO_PRINT_ERR("kmalloc of irq_ptr failed!\n");
2642 memset(irq_ptr
,0,sizeof(struct qdio_irq
));
2644 init_MUTEX(&irq_ptr
->setting_up_sema
);
2646 /* QDR must be in DMA area since CCW data address is only 32 bit */
2647 irq_ptr
->qdr
=kmalloc(sizeof(struct qdr
), GFP_KERNEL
| GFP_DMA
);
2648 if (!(irq_ptr
->qdr
)) {
2650 QDIO_PRINT_ERR("kmalloc of irq_ptr->qdr failed!\n");
2653 QDIO_DBF_TEXT0(0,setup
,"qdr:");
2654 QDIO_DBF_HEX0(0,setup
,&irq_ptr
->qdr
,sizeof(void*));
2656 if (qdio_alloc_qs(irq_ptr
,
2657 init_data
->no_input_qs
,
2658 init_data
->no_output_qs
)) {
2659 qdio_release_irq_memory(irq_ptr
);
2663 init_data
->cdev
->private->qdio_data
= irq_ptr
;
2665 qdio_set_state(irq_ptr
,QDIO_IRQ_STATE_INACTIVE
);
2670 int qdio_fill_irq(struct qdio_initialize
*init_data
)
2676 struct qdio_irq
*irq_ptr
;
2678 irq_ptr
= init_data
->cdev
->private->qdio_data
;
2680 memset(irq_ptr
,0,((char*)&irq_ptr
->qdr
)-((char*)irq_ptr
));
2682 /* wipes qib.ac, required by ar7063 */
2683 memset(irq_ptr
->qdr
,0,sizeof(struct qdr
));
2685 irq_ptr
->int_parm
=init_data
->int_parm
;
2687 irq_ptr
->irq
= init_data
->cdev
->private->irq
;
2688 irq_ptr
->no_input_qs
=init_data
->no_input_qs
;
2689 irq_ptr
->no_output_qs
=init_data
->no_output_qs
;
2691 if (init_data
->q_format
==QDIO_IQDIO_QFMT
) {
2692 irq_ptr
->is_iqdio_irq
=1;
2693 irq_ptr
->is_thinint_irq
=1;
2695 irq_ptr
->is_iqdio_irq
=0;
2696 irq_ptr
->is_thinint_irq
=hydra_thinints
;
2698 sprintf(dbf_text
,"is_i_t%1x%1x",
2699 irq_ptr
->is_iqdio_irq
,irq_ptr
->is_thinint_irq
);
2700 QDIO_DBF_TEXT2(0,setup
,dbf_text
);
2702 if (irq_ptr
->is_thinint_irq
) {
2703 irq_ptr
->dev_st_chg_ind
=qdio_get_indicator();
2704 QDIO_DBF_HEX1(0,setup
,&irq_ptr
->dev_st_chg_ind
,sizeof(void*));
2705 if (!irq_ptr
->dev_st_chg_ind
) {
2706 QDIO_PRINT_WARN("no indicator location available " \
2707 "for irq 0x%x\n",irq_ptr
->irq
);
2708 qdio_release_irq_memory(irq_ptr
);
2714 irq_ptr
->equeue
.cmd
=DEFAULT_ESTABLISH_QS_CMD
;
2715 irq_ptr
->equeue
.count
=DEFAULT_ESTABLISH_QS_COUNT
;
2716 irq_ptr
->aqueue
.cmd
=DEFAULT_ACTIVATE_QS_CMD
;
2717 irq_ptr
->aqueue
.count
=DEFAULT_ACTIVATE_QS_COUNT
;
2719 qdio_fill_qs(irq_ptr
, init_data
->cdev
,
2720 init_data
->no_input_qs
,
2721 init_data
->no_output_qs
,
2722 init_data
->input_handler
,
2723 init_data
->output_handler
,init_data
->int_parm
,
2724 init_data
->q_format
,init_data
->flags
,
2725 init_data
->input_sbal_addr_array
,
2726 init_data
->output_sbal_addr_array
);
2728 if (!try_module_get(THIS_MODULE
)) {
2729 QDIO_PRINT_CRIT("try_module_get() failed!\n");
2730 qdio_release_irq_memory(irq_ptr
);
2734 qdio_fill_thresholds(irq_ptr
,init_data
->no_input_qs
,
2735 init_data
->no_output_qs
,
2736 init_data
->min_input_threshold
,
2737 init_data
->max_input_threshold
,
2738 init_data
->min_output_threshold
,
2739 init_data
->max_output_threshold
);
2742 irq_ptr
->qdr
->qfmt
=init_data
->q_format
;
2743 irq_ptr
->qdr
->iqdcnt
=init_data
->no_input_qs
;
2744 irq_ptr
->qdr
->oqdcnt
=init_data
->no_output_qs
;
2745 irq_ptr
->qdr
->iqdsz
=sizeof(struct qdesfmt0
)/4; /* size in words */
2746 irq_ptr
->qdr
->oqdsz
=sizeof(struct qdesfmt0
)/4;
2748 irq_ptr
->qdr
->qiba
=(unsigned long)&irq_ptr
->qib
;
2749 irq_ptr
->qdr
->qkey
=QDIO_STORAGE_KEY
;
2752 irq_ptr
->qib
.qfmt
=init_data
->q_format
;
2753 if (init_data
->no_input_qs
)
2754 irq_ptr
->qib
.isliba
=(unsigned long)(irq_ptr
->input_qs
[0]->slib
);
2755 if (init_data
->no_output_qs
)
2756 irq_ptr
->qib
.osliba
=(unsigned long)(irq_ptr
->output_qs
[0]->slib
);
2757 memcpy(irq_ptr
->qib
.ebcnam
,init_data
->adapter_name
,8);
2759 qdio_set_impl_params(irq_ptr
,init_data
->qib_param_field_format
,
2760 init_data
->qib_param_field
,
2761 init_data
->no_input_qs
,
2762 init_data
->no_output_qs
,
2763 init_data
->input_slib_elements
,
2764 init_data
->output_slib_elements
);
2766 /* first input descriptors, then output descriptors */
2767 is_iqdio
= (init_data
->q_format
== QDIO_IQDIO_QFMT
) ? 1 : 0;
2768 for (i
=0;i
<init_data
->no_input_qs
;i
++)
2769 qdio_allocate_fill_input_desc(irq_ptr
, i
, is_iqdio
);
2771 for (i
=0;i
<init_data
->no_output_qs
;i
++)
2772 qdio_allocate_fill_output_desc(irq_ptr
, i
,
2773 init_data
->no_input_qs
,
2776 /* qdr, qib, sls, slsbs, slibs, sbales filled. */
2778 /* get qdio commands */
2779 ciw
= ccw_device_get_ciw(init_data
->cdev
, CIW_TYPE_EQUEUE
);
2781 QDIO_DBF_TEXT2(1,setup
,"no eq");
2782 QDIO_PRINT_INFO("No equeue CIW found for QDIO commands. "
2783 "Trying to use default.\n");
2785 irq_ptr
->equeue
= *ciw
;
2786 ciw
= ccw_device_get_ciw(init_data
->cdev
, CIW_TYPE_AQUEUE
);
2788 QDIO_DBF_TEXT2(1,setup
,"no aq");
2789 QDIO_PRINT_INFO("No aqueue CIW found for QDIO commands. "
2790 "Trying to use default.\n");
2792 irq_ptr
->aqueue
= *ciw
;
2794 /* Set new interrupt handler. */
2795 irq_ptr
->original_int_handler
= init_data
->cdev
->handler
;
2796 init_data
->cdev
->handler
= qdio_handler
;
2802 qdio_establish(struct qdio_initialize
*init_data
)
2804 struct qdio_irq
*irq_ptr
;
2805 unsigned long saveflags
;
2806 int result
, result2
;
2807 struct ccw_device
*cdev
;
2810 cdev
=init_data
->cdev
;
2811 irq_ptr
= cdev
->private->qdio_data
;
2815 if (cdev
->private->state
!= DEV_STATE_ONLINE
)
2818 down(&irq_ptr
->setting_up_sema
);
2820 qdio_fill_irq(init_data
);
2822 /* the thinint CHSC stuff */
2823 if (irq_ptr
->is_thinint_irq
) {
2825 result
= tiqdio_set_subchannel_ind(irq_ptr
,0);
2827 up(&irq_ptr
->setting_up_sema
);
2828 qdio_shutdown(cdev
, QDIO_FLAG_CLEANUP_USING_CLEAR
);
2831 tiqdio_set_delay_target(irq_ptr
,TIQDIO_DELAY_TARGET
);
2834 sprintf(dbf_text
,"qest%4x",cdev
->private->irq
);
2835 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
2836 QDIO_DBF_TEXT0(0,trace
,dbf_text
);
2839 irq_ptr
->ccw
.cmd_code
=irq_ptr
->equeue
.cmd
;
2840 irq_ptr
->ccw
.flags
=CCW_FLAG_SLI
;
2841 irq_ptr
->ccw
.count
=irq_ptr
->equeue
.count
;
2842 irq_ptr
->ccw
.cda
=QDIO_GET_ADDR(irq_ptr
->qdr
);
2844 spin_lock_irqsave(get_ccwdev_lock(cdev
),saveflags
);
2846 ccw_device_set_options(cdev
, 0);
2847 result
=ccw_device_start_timeout(cdev
,&irq_ptr
->ccw
,
2848 QDIO_DOING_ESTABLISH
,0, 0,
2849 QDIO_ESTABLISH_TIMEOUT
);
2851 result2
=ccw_device_start_timeout(cdev
,&irq_ptr
->ccw
,
2852 QDIO_DOING_ESTABLISH
,0,0,
2853 QDIO_ESTABLISH_TIMEOUT
);
2854 sprintf(dbf_text
,"eq:io%4x",result
);
2855 QDIO_DBF_TEXT2(1,setup
,dbf_text
);
2857 sprintf(dbf_text
,"eq:io%4x",result
);
2858 QDIO_DBF_TEXT2(1,setup
,dbf_text
);
2860 QDIO_PRINT_WARN("establish queues on irq %04x: do_IO " \
2861 "returned %i, next try returned %i\n",
2862 irq_ptr
->irq
,result
,result2
);
2865 ccw_device_set_timeout(cdev
, 0);
2868 spin_unlock_irqrestore(get_ccwdev_lock(cdev
),saveflags
);
2871 up(&irq_ptr
->setting_up_sema
);
2872 qdio_shutdown(cdev
,QDIO_FLAG_CLEANUP_USING_CLEAR
);
2876 wait_event_interruptible_timeout(cdev
->private->wait_q
,
2877 irq_ptr
->state
== QDIO_IRQ_STATE_ESTABLISHED
||
2878 irq_ptr
->state
== QDIO_IRQ_STATE_ERR
,
2879 QDIO_ESTABLISH_TIMEOUT
);
2881 if (irq_ptr
->state
== QDIO_IRQ_STATE_ESTABLISHED
)
2884 up(&irq_ptr
->setting_up_sema
);
2885 qdio_shutdown(cdev
, QDIO_FLAG_CLEANUP_USING_CLEAR
);
2889 irq_ptr
->qdioac
=qdio_check_siga_needs(irq_ptr
->irq
);
2890 /* if this gets set once, we're running under VM and can omit SVSes */
2891 if (irq_ptr
->qdioac
&CHSC_FLAG_SIGA_SYNC_NECESSARY
)
2894 sprintf(dbf_text
,"qdioac%2x",irq_ptr
->qdioac
);
2895 QDIO_DBF_TEXT2(0,setup
,dbf_text
);
2897 sprintf(dbf_text
,"qib ac%2x",irq_ptr
->qib
.ac
);
2898 QDIO_DBF_TEXT2(0,setup
,dbf_text
);
2900 irq_ptr
->hydra_gives_outbound_pcis
=
2901 irq_ptr
->qib
.ac
&QIB_AC_OUTBOUND_PCI_SUPPORTED
;
2902 irq_ptr
->sync_done_on_outb_pcis
=
2903 irq_ptr
->qdioac
&CHSC_FLAG_SIGA_SYNC_DONE_ON_OUTB_PCIS
;
2905 qdio_initialize_set_siga_flags_input(irq_ptr
);
2906 qdio_initialize_set_siga_flags_output(irq_ptr
);
2908 up(&irq_ptr
->setting_up_sema
);
2915 qdio_activate(struct ccw_device
*cdev
, int flags
)
2917 struct qdio_irq
*irq_ptr
;
2918 int i
,result
=0,result2
;
2919 unsigned long saveflags
;
2920 char dbf_text
[20]; /* see qdio_initialize */
2922 irq_ptr
= cdev
->private->qdio_data
;
2926 if (cdev
->private->state
!= DEV_STATE_ONLINE
)
2929 down(&irq_ptr
->setting_up_sema
);
2930 if (irq_ptr
->state
==QDIO_IRQ_STATE_INACTIVE
) {
2935 sprintf(dbf_text
,"qact%4x", irq_ptr
->irq
);
2936 QDIO_DBF_TEXT2(0,setup
,dbf_text
);
2937 QDIO_DBF_TEXT2(0,trace
,dbf_text
);
2940 irq_ptr
->ccw
.cmd_code
=irq_ptr
->aqueue
.cmd
;
2941 irq_ptr
->ccw
.flags
=CCW_FLAG_SLI
;
2942 irq_ptr
->ccw
.count
=irq_ptr
->aqueue
.count
;
2943 irq_ptr
->ccw
.cda
=QDIO_GET_ADDR(0);
2945 spin_lock_irqsave(get_ccwdev_lock(cdev
),saveflags
);
2947 ccw_device_set_timeout(cdev
, 0);
2948 ccw_device_set_options(cdev
, CCWDEV_REPORT_ALL
);
2949 result
=ccw_device_start(cdev
,&irq_ptr
->ccw
,QDIO_DOING_ACTIVATE
,
2950 0, DOIO_DENY_PREFETCH
);
2952 result2
=ccw_device_start(cdev
,&irq_ptr
->ccw
,
2953 QDIO_DOING_ACTIVATE
,0,0);
2954 sprintf(dbf_text
,"aq:io%4x",result
);
2955 QDIO_DBF_TEXT2(1,setup
,dbf_text
);
2957 sprintf(dbf_text
,"aq:io%4x",result
);
2958 QDIO_DBF_TEXT2(1,setup
,dbf_text
);
2960 QDIO_PRINT_WARN("activate queues on irq %04x: do_IO " \
2961 "returned %i, next try returned %i\n",
2962 irq_ptr
->irq
,result
,result2
);
2966 spin_unlock_irqrestore(get_ccwdev_lock(cdev
),saveflags
);
2970 for (i
=0;i
<irq_ptr
->no_input_qs
;i
++) {
2971 if (irq_ptr
->is_thinint_irq
) {
2973 * that way we know, that, if we will get interrupted
2974 * by tiqdio_inbound_processing, qdio_unmark_q will
2977 qdio_reserve_q(irq_ptr
->input_qs
[i
]);
2978 qdio_mark_tiq(irq_ptr
->input_qs
[i
]);
2979 qdio_release_q(irq_ptr
->input_qs
[i
]);
2983 if (flags
&QDIO_FLAG_NO_INPUT_INTERRUPT_CONTEXT
) {
2984 for (i
=0;i
<irq_ptr
->no_input_qs
;i
++) {
2985 irq_ptr
->input_qs
[i
]->is_input_q
|=
2986 QDIO_FLAG_NO_INPUT_INTERRUPT_CONTEXT
;
2990 wait_event_interruptible_timeout(cdev
->private->wait_q
,
2992 QDIO_IRQ_STATE_STOPPED
) ||
2994 QDIO_IRQ_STATE_ERR
)),
2995 QDIO_ACTIVATE_TIMEOUT
);
2997 switch (irq_ptr
->state
) {
2998 case QDIO_IRQ_STATE_STOPPED
:
2999 case QDIO_IRQ_STATE_ERR
:
3000 up(&irq_ptr
->setting_up_sema
);
3001 qdio_shutdown(cdev
, QDIO_FLAG_CLEANUP_USING_CLEAR
);
3002 down(&irq_ptr
->setting_up_sema
);
3006 qdio_set_state(irq_ptr
, QDIO_IRQ_STATE_ACTIVE
);
3010 up(&irq_ptr
->setting_up_sema
);
3015 /* buffers filled forwards again to make Rick happy */
3017 qdio_do_qdio_fill_input(struct qdio_q
*q
, unsigned int qidx
,
3018 unsigned int count
, struct qdio_buffer
*buffers
)
3021 set_slsb(&q
->slsb
.acc
.val
[qidx
],SLSB_CU_INPUT_EMPTY
);
3024 qidx
=(qidx
+1)&(QDIO_MAX_BUFFERS_PER_Q
-1);
3027 /* not necessary, as the queues are synced during the SIGA read */
3032 qdio_do_qdio_fill_output(struct qdio_q
*q
, unsigned int qidx
,
3033 unsigned int count
, struct qdio_buffer
*buffers
)
3036 set_slsb(&q
->slsb
.acc
.val
[qidx
],SLSB_CU_OUTPUT_PRIMED
);
3039 qidx
=(qidx
+1)&(QDIO_MAX_BUFFERS_PER_Q
-1);
3042 /* SIGA write will sync the queues */
3047 do_qdio_handle_inbound(struct qdio_q
*q
, unsigned int callflags
,
3048 unsigned int qidx
, unsigned int count
,
3049 struct qdio_buffer
*buffers
)
3053 /* This is the inbound handling of queues */
3054 used_elements
=atomic_add_return(count
, &q
->number_of_buffers_used
) - count
;
3056 qdio_do_qdio_fill_input(q
,qidx
,count
,buffers
);
3058 if ((used_elements
+count
==QDIO_MAX_BUFFERS_PER_Q
)&&
3059 (callflags
&QDIO_FLAG_UNDER_INTERRUPT
))
3060 atomic_swap(&q
->polling
,0);
3064 if (callflags
&QDIO_FLAG_DONT_SIGA
)
3069 result
=qdio_siga_input(q
);
3072 q
->error_status_flags
|=
3073 QDIO_STATUS_MORE_THAN_ONE_SIGA_ERROR
;
3074 q
->error_status_flags
|=QDIO_STATUS_LOOK_FOR_ERROR
;
3075 q
->siga_error
=result
;
3083 do_qdio_handle_outbound(struct qdio_q
*q
, unsigned int callflags
,
3084 unsigned int qidx
, unsigned int count
,
3085 struct qdio_buffer
*buffers
)
3089 /* This is the outbound handling of queues */
3090 #ifdef QDIO_PERFORMANCE_STATS
3091 perf_stats
.start_time_outbound
=NOW
;
3092 #endif /* QDIO_PERFORMANCE_STATS */
3094 qdio_do_qdio_fill_output(q
,qidx
,count
,buffers
);
3096 used_elements
=atomic_add_return(count
, &q
->number_of_buffers_used
) - count
;
3098 if (callflags
&QDIO_FLAG_DONT_SIGA
) {
3099 #ifdef QDIO_PERFORMANCE_STATS
3100 perf_stats
.outbound_time
+=NOW
-perf_stats
.start_time_outbound
;
3101 perf_stats
.outbound_cnt
++;
3102 #endif /* QDIO_PERFORMANCE_STATS */
3105 if (q
->is_iqdio_q
) {
3106 /* one siga for every sbal */
3108 qdio_kick_outbound_q(q
);
3110 __qdio_outbound_processing(q
);
3112 /* under VM, we do a SIGA sync unconditionally */
3116 * w/o shadow queues (else branch of
3117 * SYNC_MEMORY :-/ ), we try to
3118 * fast-requeue buffers
3120 if (q
->slsb
.acc
.val
[(qidx
+QDIO_MAX_BUFFERS_PER_Q
-1)
3121 &(QDIO_MAX_BUFFERS_PER_Q
-1)]!=
3122 SLSB_CU_OUTPUT_PRIMED
) {
3123 qdio_kick_outbound_q(q
);
3125 QDIO_DBF_TEXT3(0,trace
, "fast-req");
3126 #ifdef QDIO_PERFORMANCE_STATS
3127 perf_stats
.fast_reqs
++;
3128 #endif /* QDIO_PERFORMANCE_STATS */
3132 * only marking the q could take too long,
3133 * the upper layer module could do a lot of
3134 * traffic in that time
3136 __qdio_outbound_processing(q
);
3139 #ifdef QDIO_PERFORMANCE_STATS
3140 perf_stats
.outbound_time
+=NOW
-perf_stats
.start_time_outbound
;
3141 perf_stats
.outbound_cnt
++;
3142 #endif /* QDIO_PERFORMANCE_STATS */
3145 /* count must be 1 in iqdio */
3147 do_QDIO(struct ccw_device
*cdev
,unsigned int callflags
,
3148 unsigned int queue_number
, unsigned int qidx
,
3149 unsigned int count
,struct qdio_buffer
*buffers
)
3151 struct qdio_irq
*irq_ptr
;
3152 #ifdef CONFIG_QDIO_DEBUG
3155 sprintf(dbf_text
,"doQD%04x",cdev
->private->irq
);
3156 QDIO_DBF_TEXT3(0,trace
,dbf_text
);
3157 #endif /* CONFIG_QDIO_DEBUG */
3159 if ( (qidx
>QDIO_MAX_BUFFERS_PER_Q
) ||
3160 (count
>QDIO_MAX_BUFFERS_PER_Q
) ||
3161 (queue_number
>QDIO_MAX_QUEUES_PER_IRQ
) )
3167 irq_ptr
= cdev
->private->qdio_data
;
3171 #ifdef CONFIG_QDIO_DEBUG
3172 if (callflags
&QDIO_FLAG_SYNC_INPUT
)
3173 QDIO_DBF_HEX3(0,trace
,&irq_ptr
->input_qs
[queue_number
],
3176 QDIO_DBF_HEX3(0,trace
,&irq_ptr
->output_qs
[queue_number
],
3178 sprintf(dbf_text
,"flag%04x",callflags
);
3179 QDIO_DBF_TEXT3(0,trace
,dbf_text
);
3180 sprintf(dbf_text
,"qi%02xct%02x",qidx
,count
);
3181 QDIO_DBF_TEXT3(0,trace
,dbf_text
);
3182 #endif /* CONFIG_QDIO_DEBUG */
3184 if (irq_ptr
->state
!=QDIO_IRQ_STATE_ACTIVE
)
3187 if (callflags
&QDIO_FLAG_SYNC_INPUT
)
3188 do_qdio_handle_inbound(irq_ptr
->input_qs
[queue_number
],
3189 callflags
, qidx
, count
, buffers
);
3190 else if (callflags
&QDIO_FLAG_SYNC_OUTPUT
)
3191 do_qdio_handle_outbound(irq_ptr
->output_qs
[queue_number
],
3192 callflags
, qidx
, count
, buffers
);
3194 QDIO_DBF_TEXT3(1,trace
,"doQD:inv");
3200 #ifdef QDIO_PERFORMANCE_STATS
3202 qdio_perf_procfile_read(char *buffer
, char **buffer_location
, off_t offset
,
3203 int buffer_length
, int *eof
, void *data
)
3207 /* we are always called with buffer_length=4k, so we all
3208 deliver on the first read */
3212 #define _OUTP_IT(x...) c+=sprintf(buffer+c,x)
3213 _OUTP_IT("i_p_nc/c=%lu/%lu\n",i_p_nc
,i_p_c
);
3214 _OUTP_IT("ii_p_nc/c=%lu/%lu\n",ii_p_nc
,ii_p_c
);
3215 _OUTP_IT("o_p_nc/c=%lu/%lu\n",o_p_nc
,o_p_c
);
3216 _OUTP_IT("Number of tasklet runs (total) : %u\n",
3217 perf_stats
.tl_runs
);
3219 _OUTP_IT("Number of SIGA sync's issued : %u\n",
3220 perf_stats
.siga_syncs
);
3221 _OUTP_IT("Number of SIGA in's issued : %u\n",
3222 perf_stats
.siga_ins
);
3223 _OUTP_IT("Number of SIGA out's issued : %u\n",
3224 perf_stats
.siga_outs
);
3225 _OUTP_IT("Number of PCIs caught : %u\n",
3227 _OUTP_IT("Number of adapter interrupts caught : %u\n",
3228 perf_stats
.thinints
);
3229 _OUTP_IT("Number of fast requeues (outg. SBALs w/o SIGA) : %u\n",
3230 perf_stats
.fast_reqs
);
3232 _OUTP_IT("Total time of all inbound actions (us) incl. UL : %u\n",
3233 perf_stats
.inbound_time
);
3234 _OUTP_IT("Number of inbound transfers : %u\n",
3235 perf_stats
.inbound_cnt
);
3236 _OUTP_IT("Total time of all outbound do_QDIOs (us) : %u\n",
3237 perf_stats
.outbound_time
);
3238 _OUTP_IT("Number of do_QDIOs outbound : %u\n",
3239 perf_stats
.outbound_cnt
);
3245 static struct proc_dir_entry
*qdio_perf_proc_file
;
3246 #endif /* QDIO_PERFORMANCE_STATS */
3249 qdio_add_procfs_entry(void)
3251 #ifdef QDIO_PERFORMANCE_STATS
3252 proc_perf_file_registration
=0;
3253 qdio_perf_proc_file
=create_proc_entry(QDIO_PERF
,
3254 S_IFREG
|0444,&proc_root
);
3255 if (qdio_perf_proc_file
) {
3256 qdio_perf_proc_file
->read_proc
=&qdio_perf_procfile_read
;
3257 } else proc_perf_file_registration
=-1;
3259 if (proc_perf_file_registration
)
3260 QDIO_PRINT_WARN("was not able to register perf. " \
3261 "proc-file (%i).\n",
3262 proc_perf_file_registration
);
3263 #endif /* QDIO_PERFORMANCE_STATS */
3267 qdio_remove_procfs_entry(void)
3269 #ifdef QDIO_PERFORMANCE_STATS
3270 perf_stats
.tl_runs
=0;
3272 if (!proc_perf_file_registration
) /* means if it went ok earlier */
3273 remove_proc_entry(QDIO_PERF
,&proc_root
);
3274 #endif /* QDIO_PERFORMANCE_STATS */
3278 tiqdio_register_thinints(void)
3281 register_thinint_result
=
3282 s390_register_adapter_interrupt(&tiqdio_thinint_handler
);
3283 if (register_thinint_result
) {
3284 sprintf(dbf_text
,"regthn%x",(register_thinint_result
&0xff));
3285 QDIO_DBF_TEXT0(0,setup
,dbf_text
);
3286 QDIO_PRINT_ERR("failed to register adapter handler " \
3287 "(rc=%i).\nAdapter interrupts might " \
3288 "not work. Continuing.\n",
3289 register_thinint_result
);
3294 tiqdio_unregister_thinints(void)
3296 if (!register_thinint_result
)
3297 s390_unregister_adapter_interrupt(&tiqdio_thinint_handler
);
3301 qdio_get_qdio_memory(void)
3304 indicator_used
[0]=1;
3306 for (i
=1;i
<INDICATORS_PER_CACHELINE
;i
++)
3307 indicator_used
[i
]=0;
3308 indicators
=(__u32
*)kmalloc(sizeof(__u32
)*(INDICATORS_PER_CACHELINE
),
3310 if (!indicators
) return -ENOMEM
;
3311 memset(indicators
,0,sizeof(__u32
)*(INDICATORS_PER_CACHELINE
));
3316 qdio_release_qdio_memory(void)
3323 qdio_unregister_dbf_views(void)
3326 debug_unregister(qdio_dbf_setup
);
3328 debug_unregister(qdio_dbf_sbal
);
3330 debug_unregister(qdio_dbf_sense
);
3332 debug_unregister(qdio_dbf_trace
);
3333 #ifdef CONFIG_QDIO_DEBUG
3334 if (qdio_dbf_slsb_out
)
3335 debug_unregister(qdio_dbf_slsb_out
);
3336 if (qdio_dbf_slsb_in
)
3337 debug_unregister(qdio_dbf_slsb_in
);
3338 #endif /* CONFIG_QDIO_DEBUG */
3342 qdio_register_dbf_views(void)
3344 qdio_dbf_setup
=debug_register(QDIO_DBF_SETUP_NAME
,
3345 QDIO_DBF_SETUP_PAGES
,
3346 QDIO_DBF_SETUP_NR_AREAS
,
3347 QDIO_DBF_SETUP_LEN
);
3348 if (!qdio_dbf_setup
)
3350 debug_register_view(qdio_dbf_setup
,&debug_hex_ascii_view
);
3351 debug_set_level(qdio_dbf_setup
,QDIO_DBF_SETUP_LEVEL
);
3353 qdio_dbf_sbal
=debug_register(QDIO_DBF_SBAL_NAME
,
3354 QDIO_DBF_SBAL_PAGES
,
3355 QDIO_DBF_SBAL_NR_AREAS
,
3360 debug_register_view(qdio_dbf_sbal
,&debug_hex_ascii_view
);
3361 debug_set_level(qdio_dbf_sbal
,QDIO_DBF_SBAL_LEVEL
);
3363 qdio_dbf_sense
=debug_register(QDIO_DBF_SENSE_NAME
,
3364 QDIO_DBF_SENSE_PAGES
,
3365 QDIO_DBF_SENSE_NR_AREAS
,
3366 QDIO_DBF_SENSE_LEN
);
3367 if (!qdio_dbf_sense
)
3370 debug_register_view(qdio_dbf_sense
,&debug_hex_ascii_view
);
3371 debug_set_level(qdio_dbf_sense
,QDIO_DBF_SENSE_LEVEL
);
3373 qdio_dbf_trace
=debug_register(QDIO_DBF_TRACE_NAME
,
3374 QDIO_DBF_TRACE_PAGES
,
3375 QDIO_DBF_TRACE_NR_AREAS
,
3376 QDIO_DBF_TRACE_LEN
);
3377 if (!qdio_dbf_trace
)
3380 debug_register_view(qdio_dbf_trace
,&debug_hex_ascii_view
);
3381 debug_set_level(qdio_dbf_trace
,QDIO_DBF_TRACE_LEVEL
);
3383 #ifdef CONFIG_QDIO_DEBUG
3384 qdio_dbf_slsb_out
=debug_register(QDIO_DBF_SLSB_OUT_NAME
,
3385 QDIO_DBF_SLSB_OUT_PAGES
,
3386 QDIO_DBF_SLSB_OUT_NR_AREAS
,
3387 QDIO_DBF_SLSB_OUT_LEN
);
3388 if (!qdio_dbf_slsb_out
)
3390 debug_register_view(qdio_dbf_slsb_out
,&debug_hex_ascii_view
);
3391 debug_set_level(qdio_dbf_slsb_out
,QDIO_DBF_SLSB_OUT_LEVEL
);
3393 qdio_dbf_slsb_in
=debug_register(QDIO_DBF_SLSB_IN_NAME
,
3394 QDIO_DBF_SLSB_IN_PAGES
,
3395 QDIO_DBF_SLSB_IN_NR_AREAS
,
3396 QDIO_DBF_SLSB_IN_LEN
);
3397 if (!qdio_dbf_slsb_in
)
3399 debug_register_view(qdio_dbf_slsb_in
,&debug_hex_ascii_view
);
3400 debug_set_level(qdio_dbf_slsb_in
,QDIO_DBF_SLSB_IN_LEVEL
);
3401 #endif /* CONFIG_QDIO_DEBUG */
3404 QDIO_PRINT_ERR("not enough memory for dbf.\n");
3405 qdio_unregister_dbf_views();
3413 #ifdef QDIO_PERFORMANCE_STATS
3415 #endif /* QDIO_PERFORMANCE_STATS */
3417 printk("qdio: loading %s\n",version
);
3419 res
=qdio_get_qdio_memory();
3423 res
= qdio_register_dbf_views();
3427 QDIO_DBF_TEXT0(0,setup
,"initQDIO");
3429 #ifdef QDIO_PERFORMANCE_STATS
3430 memset((void*)&perf_stats
,0,sizeof(perf_stats
));
3431 QDIO_DBF_TEXT0(0,setup
,"perfstat");
3433 QDIO_DBF_HEX0(0,setup
,&ptr
,sizeof(void*));
3434 #endif /* QDIO_PERFORMANCE_STATS */
3436 qdio_add_procfs_entry();
3438 if (tiqdio_check_chsc_availability())
3439 QDIO_PRINT_ERR("Not all CHSCs supported. Continuing.\n");
3441 tiqdio_register_thinints();
3449 tiqdio_unregister_thinints();
3450 qdio_remove_procfs_entry();
3451 qdio_release_qdio_memory();
3452 qdio_unregister_dbf_views();
3454 printk("qdio: %s: module removed\n",version
);
3457 module_init(init_QDIO
);
3458 module_exit(cleanup_QDIO
);
3460 EXPORT_SYMBOL(qdio_allocate
);
3461 EXPORT_SYMBOL(qdio_establish
);
3462 EXPORT_SYMBOL(qdio_initialize
);
3463 EXPORT_SYMBOL(qdio_activate
);
3464 EXPORT_SYMBOL(do_QDIO
);
3465 EXPORT_SYMBOL(qdio_shutdown
);
3466 EXPORT_SYMBOL(qdio_free
);
3467 EXPORT_SYMBOL(qdio_cleanup
);
3468 EXPORT_SYMBOL(qdio_synchronize
);