1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2004-2005 Emulex. All rights reserved. *
5 * EMULEX and SLI are trademarks of Emulex. *
7 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
9 * This program is free software; you can redistribute it and/or *
10 * modify it under the terms of version 2 of the GNU General *
11 * Public License as published by the Free Software Foundation. *
12 * This program is distributed in the hope that it will be useful. *
13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17 * TO BE LEGALLY INVALID. See the GNU General Public License for *
18 * more details, a copy of which can be found in the file COPYING *
19 * included with this package. *
20 *******************************************************************/
22 struct lpfc_sli2_slim
;
24 #define LPFC_MAX_TARGET 256 /* max targets supported */
25 #define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els req */
26 #define LPFC_MAX_NS_RETRY 3 /* max NameServer retries */
28 #define LPFC_DFT_HBA_Q_DEPTH 2048 /* max cmds per hba */
29 #define LPFC_LC_HBA_Q_DEPTH 1024 /* max cmds per low cost hba */
30 #define LPFC_LP101_HBA_Q_DEPTH 128 /* max cmds per low cost hba */
32 #define LPFC_CMD_PER_LUN 30 /* max outstanding cmds per lun */
33 #define LPFC_SG_SEG_CNT 64 /* sg element count per scsi cmnd */
34 #define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */
36 /* Define macros for 64 bit support */
37 #define putPaddrLow(addr) ((uint32_t) (0xffffffff & (u64)(addr)))
38 #define putPaddrHigh(addr) ((uint32_t) (0xffffffff & (((u64)(addr))>>32)))
39 #define getPaddr(high, low) ((dma_addr_t)( \
40 (( (u64)(high)<<16 ) << 16)|( (u64)(low))))
41 /* Provide maximum configuration definitions. */
42 #define LPFC_DRVR_TIMEOUT 16 /* driver iocb timeout value in sec */
43 #define MAX_FCP_TARGET 256 /* max num of FCP targets supported */
44 #define FC_MAX_ADPTMSG 64
48 /* Provide DMA memory definitions the driver uses per port instance. */
50 struct list_head list
;
51 void *virt
; /* virtual address ptr */
52 dma_addr_t phys
; /* mapped address */
55 struct lpfc_dma_pool
{
56 struct lpfc_dmabuf
*elements
;
58 uint32_t current_count
;
61 /* Priority bit. Set value to exceed low water mark in lpfc_mem. */
65 /****************************************************************************/
66 /* Device VPD save area */
67 /****************************************************************************/
68 typedef struct lpfc_vpd
{
69 uint32_t status
; /* vpd status value */
70 uint32_t length
; /* number of bytes actually returned */
72 uint32_t rsvd1
; /* Revision numbers */
86 uint8_t sli1FwName
[16];
88 uint8_t sli2FwName
[16];
99 /* Statistics for ELS commands */
101 uint32_t elsRetryExceeded
;
102 uint32_t elsXmitRetry
;
103 uint32_t elsDelayRetry
;
105 uint32_t elsRcvFrame
;
109 uint32_t elsRcvFARPR
;
110 uint32_t elsRcvFLOGI
;
111 uint32_t elsRcvPLOGI
;
112 uint32_t elsRcvADISC
;
113 uint32_t elsRcvPDISC
;
119 uint32_t elsXmitFLOGI
;
120 uint32_t elsXmitPLOGI
;
121 uint32_t elsXmitPRLI
;
122 uint32_t elsXmitADISC
;
123 uint32_t elsXmitLOGO
;
125 uint32_t elsXmitRNID
;
126 uint32_t elsXmitFARP
;
127 uint32_t elsXmitFARPR
;
129 uint32_t elsXmitLSRJT
;
131 uint32_t frameRcvBcast
;
132 uint32_t frameRcvMulti
;
133 uint32_t strayXmitCmpl
;
134 uint32_t frameXmitDelay
;
139 uint32_t LinkMultiEvent
;
144 uint32_t fcpRemoteStop
;
146 uint32_t fcpPortBusy
;
148 uint32_t fcpLocalErr
;
151 enum sysfs_mbox_state
{
157 struct lpfc_sysfs_mbox
{
158 enum sysfs_mbox_state state
;
160 struct lpfcMboxq
* mbox
;
164 struct list_head hba_list
; /* List of hbas/ports */
166 struct lpfc_sli2_slim
*slim2p
;
167 dma_addr_t slim2p_mapping
;
168 uint16_t pci_cfg_value
;
172 #define LPFC_INIT_START 1 /* Initial state after board reset */
173 #define LPFC_INIT_MBX_CMDS 2 /* Initialize HBA with mbox commands */
174 #define LPFC_LINK_DOWN 3 /* HBA initialized, link is down */
175 #define LPFC_LINK_UP 4 /* Link is up - issue READ_LA */
176 #define LPFC_LOCAL_CFG_LINK 5 /* local NPORT Id configured */
177 #define LPFC_FLOGI 6 /* FLOGI sent to Fabric */
178 #define LPFC_FABRIC_CFG_LINK 7 /* Fabric assigned NPORT Id
180 #define LPFC_NS_REG 8 /* Register with NameServer */
181 #define LPFC_NS_QRY 9 /* Query NameServer for NPort ID list */
182 #define LPFC_BUILD_DISC_LIST 10 /* Build ADISC and PLOGI lists for
183 * device authentication / discovery */
184 #define LPFC_DISC_AUTH 11 /* Processing ADISC list */
185 #define LPFC_CLEAR_LA 12 /* authentication cmplt - issue
187 #define LPFC_HBA_READY 32
188 #define LPFC_HBA_ERROR 0xff
190 uint8_t fc_linkspeed
; /* Link speed after last READ_LA */
192 uint32_t fc_eventTag
; /* event tag for link attention */
193 uint32_t fc_prli_sent
; /* cntr for outstanding PRLIs */
195 uint32_t num_disc_nodes
; /*in addition to hba_state */
197 struct timer_list fc_estabtmo
; /* link establishment timer */
198 struct timer_list fc_disctmo
; /* Discovery rescue timer */
199 struct timer_list fc_fdmitmo
; /* fdmi timer */
200 /* These fields used to be binfo */
201 struct lpfc_name fc_nodename
; /* fc nodename */
202 struct lpfc_name fc_portname
; /* fc portname */
203 uint32_t fc_pref_DID
; /* preferred D_ID */
204 uint8_t fc_pref_ALPA
; /* preferred AL_PA */
205 uint32_t fc_edtov
; /* E_D_TOV timer value */
206 uint32_t fc_arbtov
; /* ARB_TOV timer value */
207 uint32_t fc_ratov
; /* R_A_TOV timer value */
208 uint32_t fc_rttov
; /* R_T_TOV timer value */
209 uint32_t fc_altov
; /* AL_TOV timer value */
210 uint32_t fc_crtov
; /* C_R_TOV timer value */
211 uint32_t fc_citov
; /* C_I_TOV timer value */
212 uint32_t fc_myDID
; /* fibre channel S_ID */
213 uint32_t fc_prevDID
; /* previous fibre channel S_ID */
215 struct serv_parm fc_sparam
; /* buffer for our service parameters */
216 struct serv_parm fc_fabparam
; /* fabric service parameters buffer */
217 uint8_t alpa_map
[128]; /* AL_PA map from READ_LA */
219 uint8_t fc_ns_retry
; /* retries for fabric nameserver */
220 uint32_t fc_nlp_cnt
; /* outstanding NODELIST requests */
221 uint32_t fc_rscn_id_cnt
; /* count of RSCNs payloads in list */
222 struct lpfc_dmabuf
*fc_rscn_id_list
[FC_MAX_HOLD_RSCN
];
224 uint32_t fc_flag
; /* FC flags */
225 #define FC_PT2PT 0x1 /* pt2pt with no fabric */
226 #define FC_PT2PT_PLOGI 0x2 /* pt2pt initiate PLOGI */
227 #define FC_DISC_TMO 0x4 /* Discovery timer running */
228 #define FC_PUBLIC_LOOP 0x8 /* Public loop */
229 #define FC_LBIT 0x10 /* LOGIN bit in loopinit set */
230 #define FC_RSCN_MODE 0x20 /* RSCN cmd rcv'ed */
231 #define FC_NLP_MORE 0x40 /* More node to process in node tbl */
232 #define FC_OFFLINE_MODE 0x80 /* Interface is offline for diag */
233 #define FC_FABRIC 0x100 /* We are fabric attached */
234 #define FC_ESTABLISH_LINK 0x200 /* Reestablish Link */
235 #define FC_RSCN_DISCOVERY 0x400 /* Authenticate all devices after RSCN*/
236 #define FC_LOADING 0x1000 /* HBA in process of loading drvr */
237 #define FC_UNLOADING 0x2000 /* HBA in process of unloading drvr */
238 #define FC_SCSI_SCAN_TMO 0x4000 /* scsi scan timer running */
239 #define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */
240 #define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */
242 uint32_t fc_topology
; /* link topology, from LINK INIT */
244 struct lpfc_stats fc_stat
;
246 /* These are the head/tail pointers for the bind, plogi, adisc, unmap,
247 * and map lists. Their counters are immediately following.
249 struct list_head fc_plogi_list
;
250 struct list_head fc_adisc_list
;
251 struct list_head fc_reglogin_list
;
252 struct list_head fc_prli_list
;
253 struct list_head fc_nlpunmap_list
;
254 struct list_head fc_nlpmap_list
;
255 struct list_head fc_npr_list
;
256 struct list_head fc_unused_list
;
258 /* Keep counters for the number of entries in each list. */
259 uint16_t fc_plogi_cnt
;
260 uint16_t fc_adisc_cnt
;
261 uint16_t fc_reglogin_cnt
;
262 uint16_t fc_prli_cnt
;
263 uint16_t fc_unmap_cnt
;
266 uint16_t fc_unused_cnt
;
267 struct lpfc_nodelist fc_fcpnodev
; /* nodelist entry for no device */
268 uint32_t nport_event_cnt
; /* timestamp for nlplist entry */
270 #define LPFC_RPI_HASH_SIZE 64
271 #define LPFC_RPI_HASH_FUNC(x) ((x) & (0x3f))
272 /* ptr to active D_ID / RPIs */
273 struct lpfc_nodelist
*fc_nlplookup
[LPFC_RPI_HASH_SIZE
];
275 uint32_t RandomData
[7];
277 uint32_t cfg_log_verbose
;
278 uint32_t cfg_lun_queue_depth
;
279 uint32_t cfg_nodev_tmo
;
280 uint32_t cfg_hba_queue_depth
;
281 uint32_t cfg_fcp_class
;
282 uint32_t cfg_use_adisc
;
284 uint32_t cfg_topology
;
285 uint32_t cfg_scan_down
;
286 uint32_t cfg_link_speed
;
287 uint32_t cfg_cr_delay
;
288 uint32_t cfg_cr_count
;
289 uint32_t cfg_fdmi_on
;
290 uint32_t cfg_fcp_bind_method
;
291 uint32_t cfg_discovery_threads
;
292 uint32_t cfg_max_luns
;
293 uint32_t cfg_sg_seg_cnt
;
294 uint32_t cfg_sg_dma_buf_size
;
296 lpfc_vpd_t vpd
; /* vital product data */
298 struct Scsi_Host
*host
;
299 struct pci_dev
*pcidev
;
300 struct list_head work_list
;
301 uint32_t work_ha
; /* Host Attention Bits for WT */
302 uint32_t work_ha_mask
; /* HA Bits owned by WT */
303 uint32_t work_hs
; /* HS stored in case of ERRAT */
304 uint32_t work_status
[2]; /* Extra status from SLIM */
305 uint32_t work_hba_events
; /* Timeout to be handled */
306 #define WORKER_DISC_TMO 0x1 /* Discovery timeout */
307 #define WORKER_ELS_TMO 0x2 /* ELS timeout */
308 #define WORKER_MBOX_TMO 0x4 /* MBOX timeout */
309 #define WORKER_FDMI_TMO 0x8 /* FDMI timeout */
311 wait_queue_head_t
*work_wait
;
312 struct task_struct
*worker_thread
;
314 unsigned long pci_bar0_map
; /* Physical address for PCI BAR0 */
315 unsigned long pci_bar2_map
; /* Physical address for PCI BAR2 */
316 void __iomem
*slim_memmap_p
; /* Kernel memory mapped address for
318 void __iomem
*ctrl_regs_memmap_p
;/* Kernel memory mapped address for
321 void __iomem
*MBslimaddr
; /* virtual address for mbox cmds */
322 void __iomem
*HAregaddr
; /* virtual address for host attn reg */
323 void __iomem
*CAregaddr
; /* virtual address for chip attn reg */
324 void __iomem
*HSregaddr
; /* virtual address for host status
326 void __iomem
*HCregaddr
; /* virtual address for host ctl reg */
328 int brd_no
; /* FC board number */
330 char SerialNumber
[32]; /* adapter Serial Number */
331 char OptionROMVersion
[32]; /* adapter BIOS / Fcode version */
332 char ModelDesc
[256]; /* Model Description */
333 char ModelName
[80]; /* Model Name */
334 char ProgramType
[256]; /* Program Type */
335 char Port
[20]; /* Port No */
336 uint8_t vpd_flag
; /* VPD data flag */
338 #define VPD_MODEL_DESC 0x1 /* valid vpd model description */
339 #define VPD_MODEL_NAME 0x2 /* valid vpd model name */
340 #define VPD_PROGRAM_TYPE 0x4 /* valid vpd program type */
341 #define VPD_PORT 0x8 /* valid vpd port data */
342 #define VPD_MASK 0xf /* mask for any vpd data */
344 struct timer_list els_tmofunc
;
348 uint64_t fc4InputRequests
;
349 uint64_t fc4OutputRequests
;
350 uint64_t fc4ControlRequests
;
352 struct lpfc_sysfs_mbox sysfs_mbox
;
355 struct list_head lpfc_scsi_buf_list
;
356 uint32_t total_scsi_bufs
;
357 struct list_head lpfc_iocb_list
;
358 uint32_t total_iocbq_bufs
;
361 struct pci_pool
*lpfc_scsi_dma_buf_pool
;
362 struct pci_pool
*lpfc_mbuf_pool
;
363 struct lpfc_dma_pool lpfc_mbuf_safety_pool
;
365 mempool_t
*mbox_mem_pool
;
366 mempool_t
*nlp_mem_pool
;
367 struct list_head freebufList
;
368 struct list_head ctrspbuflist
;
369 struct list_head rnidrspbuflist
;
371 struct fc_host_statistics link_stats
;
378 struct list_head list
;