drivers/serial/8250.h

   1 /*
   2  *  linux/drivers/char/8250.h
   3  *
   4  *  Driver for 8250/16550-type serial ports
   5  *
   6  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
   7  *
   8  *  Copyright (C) 2001 Russell King.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  *
  15  *  $Id: 8250.h,v 1.8 2002/07/21 21:32:30 rmk Exp $
  16  */
  17
  18 #include <linux/config.h>
  19 #include <linux/serial_8250.h>
  20
  21 struct old_serial_port {
  22         unsigned int uart;
  23         unsigned int baud_base;
  24         unsigned int port;
  25         unsigned int irq;
  26         unsigned int flags;
  27         unsigned char hub6;
  28         unsigned char io_type;
  29         unsigned char *iomem_base;
  30         unsigned short iomem_reg_shift;
  31 };
  32
  33 /*
  34  * This replaces serial_uart_config in include/linux/serial.h
  35  */
  36 struct serial8250_config {
  37         const char      *name;
  38         unsigned short  fifo_size;
  39         unsigned short  tx_loadsz;
  40         unsigned char   fcr;
  41         unsigned int    flags;
  42 };
  43
  44 #define UART_CAP_FIFO   (1 << 8)        /* UART has FIFO */
  45 #define UART_CAP_EFR    (1 << 9)        /* UART has EFR */
  46 #define UART_CAP_SLEEP  (1 << 10)       /* UART has IER sleep */
  47 #define UART_CAP_AFE    (1 << 11)       /* MCR-based hw flow control */
  48 #define UART_CAP_UUE    (1 << 12)       /* UART needs IER bit 6 set (Xscale) */
  49
  50 #define UART_BUG_QUOT   (1 << 0)        /* UART has buggy quot LSB */
  51 #define UART_BUG_TXEN   (1 << 1)        /* UART has buggy TX IIR status */
  52
  53 #if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486))
  54 #define _INLINE_ inline
  55 #else
  56 #define _INLINE_
  57 #endif
  58
  59 #define PROBE_RSA       (1 << 0)
  60 #define PROBE_ANY       (~0)
  61
  62 #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
  63
  64 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ
  65 #define SERIAL8250_SHARE_IRQS 1
  66 #else
  67 #define SERIAL8250_SHARE_IRQS 0
  68 #endif
  69
  70 #if defined(__alpha__) && !defined(CONFIG_PCI)
  71 /*
  72  * Digital did something really horribly wrong with the OUT1 and OUT2
  73  * lines on at least some ALPHA's.  The failure mode is that if either
  74  * is cleared, the machine locks up with endless interrupts.
  75  */
  76 #define ALPHA_KLUDGE_MCR  (UART_MCR_OUT2 | UART_MCR_OUT1)
  77 #elif defined(CONFIG_SBC8560)
  78 /*
  79  * WindRiver did something similarly broken on their SBC8560 board. The
  80  * UART tristates its IRQ output while OUT2 is clear, but they pulled
  81  * the interrupt line _up_ instead of down, so if we register the IRQ
  82  * while the UART is in that state, we die in an IRQ storm. */
  83 #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
  84 #else
  85 #define ALPHA_KLUDGE_MCR 0
  86 #endif