arch/ia64/kernel/irq_ia64.c

   1 /*
   2  * linux/arch/ia64/kernel/irq.c
   3  *
   4  * Copyright (C) 1998-2001 Hewlett-Packard Co
   5  *      Stephane Eranian <eranian@hpl.hp.com>
   6  *      David Mosberger-Tang <davidm@hpl.hp.com>
   7  *
   8  *  6/10/99: Updated to bring in sync with x86 version to facilitate
   9  *           support for SMP and different interrupt controllers.
  10  *
  11  * 09/15/00 Goutham Rao <goutham.rao@intel.com> Implemented pci_irq_to_vector
  12  *                      PCI to vector allocation routine.
  13  * 04/14/2004 Ashok Raj <ashok.raj@intel.com>
  14  *                                              Added CPU Hotplug handling for IPF.
  15  */
  16
  17 #include <linux/config.h>
  18 #include <linux/module.h>
  19
  20 #include <linux/jiffies.h>
  21 #include <linux/errno.h>
  22 #include <linux/init.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/ioport.h>
  25 #include <linux/kernel_stat.h>
  26 #include <linux/slab.h>
  27 #include <linux/ptrace.h>
  28 #include <linux/random.h>       /* for rand_initialize_irq() */
  29 #include <linux/signal.h>
  30 #include <linux/smp.h>
  31 #include <linux/smp_lock.h>
  32 #include <linux/threads.h>
  33 #include <linux/bitops.h>
  34
  35 #include <asm/delay.h>
  36 #include <asm/intrinsics.h>
  37 #include <asm/io.h>
  38 #include <asm/hw_irq.h>
  39 #include <asm/machvec.h>
  40 #include <asm/pgtable.h>
  41 #include <asm/system.h>
  42
  43 #ifdef CONFIG_PERFMON
  44 # include <asm/perfmon.h>
  45 #endif
  46
  47 #define IRQ_DEBUG       0
  48
  49 /* default base addr of IPI table */
  50 void __iomem *ipi_base_addr = ((void __iomem *)
  51                                (__IA64_UNCACHED_OFFSET | IA64_IPI_DEFAULT_BASE_ADDR));
  52
  53 /*
  54  * Legacy IRQ to IA-64 vector translation table.
  55  */
  56 __u8 isa_irq_to_vector_map[16] = {
  57         /* 8259 IRQ translation, first 16 entries */
  58         0x2f, 0x20, 0x2e, 0x2d, 0x2c, 0x2b, 0x2a, 0x29,
  59         0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21
  60 };
  61 EXPORT_SYMBOL(isa_irq_to_vector_map);
  62
  63 static unsigned long ia64_vector_mask[BITS_TO_LONGS(IA64_NUM_DEVICE_VECTORS)];
  64
  65 int
  66 assign_irq_vector_nopanic (int irq)
  67 {
  68         int pos, vector;
  69  again:
  70         pos = find_first_zero_bit(ia64_vector_mask, IA64_NUM_DEVICE_VECTORS);
  71         vector = IA64_FIRST_DEVICE_VECTOR + pos;
  72         if (vector > IA64_LAST_DEVICE_VECTOR)
  73                 return -1;
  74         if (test_and_set_bit(pos, ia64_vector_mask))
  75                 goto again;
  76         return vector;
  77 }
  78
  79 int
  80 assign_irq_vector (int irq)
  81 {
  82         int vector = assign_irq_vector_nopanic(irq);
  83
  84         if (vector < 0)
  85                 panic("assign_irq_vector: out of interrupt vectors!");
  86
  87         return vector;
  88 }
  89
  90 void
  91 free_irq_vector (int vector)
  92 {
  93         int pos;
  94
  95         if (vector < IA64_FIRST_DEVICE_VECTOR || vector > IA64_LAST_DEVICE_VECTOR)
  96                 return;
  97
  98         pos = vector - IA64_FIRST_DEVICE_VECTOR;
  99         if (!test_and_clear_bit(pos, ia64_vector_mask))
 100                 printk(KERN_WARNING "%s: double free!\n", __FUNCTION__);
 101 }
 102
 103 #ifdef CONFIG_SMP
 104 #       define IS_RESCHEDULE(vec)       (vec == IA64_IPI_RESCHEDULE)
 105 #else
 106 #       define IS_RESCHEDULE(vec)       (0)
 107 #endif
 108 /*
 109  * That's where the IVT branches when we get an external
 110  * interrupt. This branches to the correct hardware IRQ handler via
 111  * function ptr.
 112  */
 113 void
 114 ia64_handle_irq (ia64_vector vector, struct pt_regs *regs)
 115 {
 116         unsigned long saved_tpr;
 117
 118 #if IRQ_DEBUG
 119         {
 120                 unsigned long bsp, sp;
 121
 122                 /*
 123                  * Note: if the interrupt happened while executing in
 124                  * the context switch routine (ia64_switch_to), we may
 125                  * get a spurious stack overflow here.  This is
 126                  * because the register and the memory stack are not
 127                  * switched atomically.
 128                  */
 129                 bsp = ia64_getreg(_IA64_REG_AR_BSP);
 130                 sp = ia64_getreg(_IA64_REG_SP);
 131
 132                 if ((sp - bsp) < 1024) {
 133                         static unsigned char count;
 134                         static long last_time;
 135
 136                         if (jiffies - last_time > 5*HZ)
 137                                 count = 0;
 138                         if (++count < 5) {
 139                                 last_time = jiffies;
 140                                 printk("ia64_handle_irq: DANGER: less than "
 141                                        "1KB of free stack space!!\n"
 142                                        "(bsp=0x%lx, sp=%lx)\n", bsp, sp);
 143                         }
 144                 }
 145         }
 146 #endif /* IRQ_DEBUG */
 147
 148         /*
 149          * Always set TPR to limit maximum interrupt nesting depth to
 150          * 16 (without this, it would be ~240, which could easily lead
 151          * to kernel stack overflows).
 152          */
 153         irq_enter();
 154         saved_tpr = ia64_getreg(_IA64_REG_CR_TPR);
 155         ia64_srlz_d();
 156         while (vector != IA64_SPURIOUS_INT_VECTOR) {
 157                 if (!IS_RESCHEDULE(vector)) {
 158                         ia64_setreg(_IA64_REG_CR_TPR, vector);
 159                         ia64_srlz_d();
 160
 161                         __do_IRQ(local_vector_to_irq(vector), regs);
 162
 163                         /*
 164                          * Disable interrupts and send EOI:
 165                          */
 166                         local_irq_disable();
 167                         ia64_setreg(_IA64_REG_CR_TPR, saved_tpr);
 168                 }
 169                 ia64_eoi();
 170                 vector = ia64_get_ivr();
 171         }
 172         /*
 173          * This must be done *after* the ia64_eoi().  For example, the keyboard softirq
 174          * handler needs to be able to wait for further keyboard interrupts, which can't
 175          * come through until ia64_eoi() has been done.
 176          */
 177         irq_exit();
 178 }
 179
 180 #ifdef CONFIG_HOTPLUG_CPU
 181 /*
 182  * This function emulates a interrupt processing when a cpu is about to be
 183  * brought down.
 184  */
 185 void ia64_process_pending_intr(void)
 186 {
 187         ia64_vector vector;
 188         unsigned long saved_tpr;
 189         extern unsigned int vectors_in_migration[NR_IRQS];
 190
 191         vector = ia64_get_ivr();
 192
 193          irq_enter();
 194          saved_tpr = ia64_getreg(_IA64_REG_CR_TPR);
 195          ia64_srlz_d();
 196
 197          /*
 198           * Perform normal interrupt style processing
 199           */
 200         while (vector != IA64_SPURIOUS_INT_VECTOR) {
 201                 if (!IS_RESCHEDULE(vector)) {
 202                         ia64_setreg(_IA64_REG_CR_TPR, vector);
 203                         ia64_srlz_d();
 204
 205                         /*
 206                          * Now try calling normal ia64_handle_irq as it would have got called
 207                          * from a real intr handler. Try passing null for pt_regs, hopefully
 208                          * it will work. I hope it works!.
 209                          * Probably could shared code.
 210                          */
 211                         vectors_in_migration[local_vector_to_irq(vector)]=0;
 212                         __do_IRQ(local_vector_to_irq(vector), NULL);
 213
 214                         /*
 215                          * Disable interrupts and send EOI
 216                          */
 217                         local_irq_disable();
 218                         ia64_setreg(_IA64_REG_CR_TPR, saved_tpr);
 219                 }
 220                 ia64_eoi();
 221                 vector = ia64_get_ivr();
 222         }
 223         irq_exit();
 224 }
 225 #endif
 226
 227
 228 #ifdef CONFIG_SMP
 229 extern irqreturn_t handle_IPI (int irq, void *dev_id, struct pt_regs *regs);
 230
 231 static struct irqaction ipi_irqaction = {
 232         .handler =      handle_IPI,
 233         .flags =        SA_INTERRUPT,
 234         .name =         "IPI"
 235 };
 236 #endif
 237
 238 void
 239 register_percpu_irq (ia64_vector vec, struct irqaction *action)
 240 {
 241         irq_desc_t *desc;
 242         unsigned int irq;
 243
 244         for (irq = 0; irq < NR_IRQS; ++irq)
 245                 if (irq_to_vector(irq) == vec) {
 246                         desc = irq_descp(irq);
 247                         desc->status |= IRQ_PER_CPU;
 248                         desc->handler = &irq_type_ia64_lsapic;
 249                         if (action)
 250                                 setup_irq(irq, action);
 251                 }
 252 }
 253
 254 void __init
 255 init_IRQ (void)
 256 {
 257         register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL);
 258 #ifdef CONFIG_SMP
 259         register_percpu_irq(IA64_IPI_VECTOR, &ipi_irqaction);
 260 #endif
 261 #ifdef CONFIG_PERFMON
 262         pfm_init_percpu();
 263 #endif
 264         platform_irq_init();
 265 }
 266
 267 void
 268 ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect)
 269 {
 270         void __iomem *ipi_addr;
 271         unsigned long ipi_data;
 272         unsigned long phys_cpu_id;
 273
 274 #ifdef CONFIG_SMP
 275         phys_cpu_id = cpu_physical_id(cpu);
 276 #else
 277         phys_cpu_id = (ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff;
 278 #endif
 279
 280         /*
 281          * cpu number is in 8bit ID and 8bit EID
 282          */
 283
 284         ipi_data = (delivery_mode << 8) | (vector & 0xff);
 285         ipi_addr = ipi_base_addr + ((phys_cpu_id << 4) | ((redirect & 1) << 3));
 286
 287         writeq(ipi_data, ipi_addr);
 288 }