[ARM] Fix SMP booting

[linux-2.6/verdex.git] / arch / powerpc / platforms / iseries / pci.c

/*
 * Copyright (C) 2001 Allan Trautman, IBM Corporation
 *
 * iSeries specific routines for PCI.
 *
 * Based on code from pci.c and iSeries_pci.c 32bit
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/ide.h>
#include <linux/pci.h>

#include <asm/io.h>
#include <asm/irq.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/iommu.h>
#include <asm/abs_addr.h>

#include <asm/iseries/hv_call_xm.h>
#include <asm/iseries/mf.h>
#include <asm/iseries/iommu.h>

#include <asm/ppc-pci.h>

#include "irq.h"
#include "pci.h"
#include "call_pci.h"

/*
 * Forward declares of prototypes.
 */
static struct device_node *find_Device_Node(int bus, int devfn);

static int Pci_Retry_Max = 3;   /* Only retry 3 times  */
static int Pci_Error_Flag = 1;  /* Set Retry Error on. */

static struct pci_ops iSeries_pci_ops;

/*
 * Table defines
 * Each Entry size is 4 MB * 1024 Entries = 4GB I/O address space.
 */
#define IOMM_TABLE_MAX_ENTRIES  1024
#define IOMM_TABLE_ENTRY_SIZE   0x0000000000400000UL
#define BASE_IO_MEMORY          0xE000000000000000UL

static unsigned long max_io_memory = BASE_IO_MEMORY;
static long current_iomm_table_entry;

/*
 * Lookup Tables.
 */
static struct device_node *iomm_table[IOMM_TABLE_MAX_ENTRIES];
static u8 iobar_table[IOMM_TABLE_MAX_ENTRIES];

static const char pci_io_text[] = "iSeries PCI I/O";
static DEFINE_SPINLOCK(iomm_table_lock);

/*
 * iomm_table_allocate_entry
 *
 * Adds pci_dev entry in address translation table
 *
 * - Allocates the number of entries required in table base on BAR
 *   size.
 * - Allocates starting at BASE_IO_MEMORY and increases.
 * - The size is round up to be a multiple of entry size.
 * - CurrentIndex is incremented to keep track of the last entry.
 * - Builds the resource entry for allocated BARs.
 */
static void iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
{
        struct resource *bar_res = &dev->resource[bar_num];
        long bar_size = pci_resource_len(dev, bar_num);

        /*
         * No space to allocate, quick exit, skip Allocation.
         */
        if (bar_size == 0)
                return;
        /*
         * Set Resource values.
         */
        spin_lock(&iomm_table_lock);
        bar_res->name = pci_io_text;
        bar_res->start = BASE_IO_MEMORY +
                IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry;
        bar_res->end = bar_res->start + bar_size - 1;
        /*
         * Allocate the number of table entries needed for BAR.
         */
        while (bar_size > 0 ) {
                iomm_table[current_iomm_table_entry] = dev->sysdata;
                iobar_table[current_iomm_table_entry] = bar_num;
                bar_size -= IOMM_TABLE_ENTRY_SIZE;
                ++current_iomm_table_entry;
        }
        max_io_memory = BASE_IO_MEMORY +
                IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry;
        spin_unlock(&iomm_table_lock);
}

/*
 * allocate_device_bars
 *
 * - Allocates ALL pci_dev BAR's and updates the resources with the
 *   BAR value.  BARS with zero length will have the resources
 *   The HvCallPci_getBarParms is used to get the size of the BAR
 *   space.  It calls iomm_table_allocate_entry to allocate
 *   each entry.
 * - Loops through The Bar resources(0 - 5) including the ROM
 *   is resource(6).
 */
static void allocate_device_bars(struct pci_dev *dev)
{
        int bar_num;

        for (bar_num = 0; bar_num <= PCI_ROM_RESOURCE; ++bar_num)
                iomm_table_allocate_entry(dev, bar_num);
}

/*
 * Log error information to system console.
 * Filter out the device not there errors.
 * PCI: EADs Connect Failed 0x18.58.10 Rc: 0x00xx
 * PCI: Read Vendor Failed 0x18.58.10 Rc: 0x00xx
 * PCI: Connect Bus Unit Failed 0x18.58.10 Rc: 0x00xx
 */
static void pci_Log_Error(char *Error_Text, int Bus, int SubBus,
                int AgentId, int HvRc)
{
        if (HvRc == 0x0302)
                return;
        printk(KERN_ERR "PCI: %s Failed: 0x%02X.%02X.%02X Rc: 0x%04X",
               Error_Text, Bus, SubBus, AgentId, HvRc);
}

/*
 * iSeries_pcibios_init
 *
 * Description:
 *   This function checks for all possible system PCI host bridges that connect
 *   PCI buses.  The system hypervisor is queried as to the guest partition
 *   ownership status.  A pci_controller is built for any bus which is partially
 *   owned or fully owned by this guest partition.
 */
void iSeries_pcibios_init(void)
{
        struct pci_controller *phb;
        struct device_node *root = of_find_node_by_path("/");
        struct device_node *node = NULL;

        if (root == NULL) {
                printk(KERN_CRIT "iSeries_pcibios_init: can't find root "
                                "of device tree\n");
                return;
        }
        while ((node = of_get_next_child(root, node)) != NULL) {
                HvBusNumber bus;
                u32 *busp;

                if ((node->type == NULL) || (strcmp(node->type, "pci") != 0))
                        continue;

                busp = (u32 *)get_property(node, "bus-range", NULL);
                if (busp == NULL)
                        continue;
                bus = *busp;
                printk("bus %d appears to exist\n", bus);
                phb = pcibios_alloc_controller(node);
                if (phb == NULL)
                        continue;

                phb->pci_mem_offset = phb->local_number = bus;
                phb->first_busno = bus;
                phb->last_busno = bus;
                phb->ops = &iSeries_pci_ops;
        }

        of_node_put(root);

        pci_devs_phb_init();
}

/*
 * iSeries_pci_final_fixup(void)
 */
void __init iSeries_pci_final_fixup(void)
{
        struct pci_dev *pdev = NULL;
        struct device_node *node;
        int DeviceCount = 0;

        /* Fix up at the device node and pci_dev relationship */
        mf_display_src(0xC9000100);

        printk("pcibios_final_fixup\n");
        for_each_pci_dev(pdev) {
                node = find_Device_Node(pdev->bus->number, pdev->devfn);
                printk("pci dev %p (%x.%x), node %p\n", pdev,
                       pdev->bus->number, pdev->devfn, node);

                if (node != NULL) {
                        struct pci_dn *pdn = PCI_DN(node);
                        u32 *agent;

                        agent = (u32 *)get_property(node, "linux,agent-id",
                                        NULL);
                        if ((pdn != NULL) && (agent != NULL)) {
                                u8 irq = iSeries_allocate_IRQ(pdn->busno, 0,
                                                pdn->bussubno);
                                int err;

                                err = HvCallXm_connectBusUnit(pdn->busno, pdn->bussubno,
                                                *agent, irq);
                                if (err)
                                        pci_Log_Error("Connect Bus Unit",
                                                pdn->busno, pdn->bussubno, *agent, err);
                                else {
                                        err = HvCallPci_configStore8(pdn->busno, pdn->bussubno,
                                                        *agent,
                                                        PCI_INTERRUPT_LINE,
                                                        irq);
                                        if (err)
                                                pci_Log_Error("PciCfgStore Irq Failed!",
                                                        pdn->busno, pdn->bussubno, *agent, err);
                                }
                                if (!err)
                                        pdev->irq = irq;
                        }

                        ++DeviceCount;
                        pdev->sysdata = (void *)node;
                        PCI_DN(node)->pcidev = pdev;
                        allocate_device_bars(pdev);
                        iSeries_Device_Information(pdev, DeviceCount);
                        iommu_devnode_init_iSeries(node);
                } else
                        printk("PCI: Device Tree not found for 0x%016lX\n",
                                        (unsigned long)pdev);
        }
        iSeries_activate_IRQs();
        mf_display_src(0xC9000200);
}

void pcibios_fixup_bus(struct pci_bus *PciBus)
{
}

void pcibios_fixup_resources(struct pci_dev *pdev)
{
}

/*
 * I/0 Memory copy MUST use mmio commands on iSeries
 * To do; For performance, include the hv call directly
 */
void iSeries_memset_io(volatile void __iomem *dest, char c, size_t Count)
{
        u8 ByteValue = c;
        long NumberOfBytes = Count;

        while (NumberOfBytes > 0) {
                iSeries_Write_Byte(ByteValue, dest++);
                -- NumberOfBytes;
        }
}
EXPORT_SYMBOL(iSeries_memset_io);

void iSeries_memcpy_toio(volatile void __iomem *dest, void *source, size_t count)
{
        char *src = source;
        long NumberOfBytes = count;

        while (NumberOfBytes > 0) {
                iSeries_Write_Byte(*src++, dest++);
                -- NumberOfBytes;
        }
}
EXPORT_SYMBOL(iSeries_memcpy_toio);

void iSeries_memcpy_fromio(void *dest, const volatile void __iomem *src, size_t count)
{
        char *dst = dest;
        long NumberOfBytes = count;

        while (NumberOfBytes > 0) {
                *dst++ = iSeries_Read_Byte(src++);
                -- NumberOfBytes;
        }
}
EXPORT_SYMBOL(iSeries_memcpy_fromio);

/*
 * Look down the chain to find the matching Device Device
 */
static struct device_node *find_Device_Node(int bus, int devfn)
{
        struct device_node *node;

        for (node = NULL; (node = of_find_all_nodes(node)); ) {
                struct pci_dn *pdn = PCI_DN(node);

                if (pdn && (bus == pdn->busno) && (devfn == pdn->devfn))
                        return node;
        }
        return NULL;
}

#if 0
/*
 * Returns the device node for the passed pci_dev
 * Sanity Check Node PciDev to passed pci_dev
 * If none is found, returns a NULL which the client must handle.
 */
static struct device_node *get_Device_Node(struct pci_dev *pdev)
{
        struct device_node *node;

        node = pdev->sysdata;
        if (node == NULL || PCI_DN(node)->pcidev != pdev)
                node = find_Device_Node(pdev->bus->number, pdev->devfn);
        return node;
}
#endif

/*
 * Config space read and write functions.
 * For now at least, we look for the device node for the bus and devfn
 * that we are asked to access.  It may be possible to translate the devfn
 * to a subbus and deviceid more directly.
 */
static u64 hv_cfg_read_func[4]  = {
        HvCallPciConfigLoad8, HvCallPciConfigLoad16,
        HvCallPciConfigLoad32, HvCallPciConfigLoad32
};

static u64 hv_cfg_write_func[4] = {
        HvCallPciConfigStore8, HvCallPciConfigStore16,
        HvCallPciConfigStore32, HvCallPciConfigStore32
};

/*
 * Read PCI config space
 */
static int iSeries_pci_read_config(struct pci_bus *bus, unsigned int devfn,
                int offset, int size, u32 *val)
{
        struct device_node *node = find_Device_Node(bus->number, devfn);
        u64 fn;
        struct HvCallPci_LoadReturn ret;

        if (node == NULL)
                return PCIBIOS_DEVICE_NOT_FOUND;
        if (offset > 255) {
                *val = ~0;
                return PCIBIOS_BAD_REGISTER_NUMBER;
        }

        fn = hv_cfg_read_func[(size - 1) & 3];
        HvCall3Ret16(fn, &ret, iseries_ds_addr(node), offset, 0);

        if (ret.rc != 0) {
                *val = ~0;
                return PCIBIOS_DEVICE_NOT_FOUND;        /* or something */
        }

        *val = ret.value;
        return 0;
}

/*
 * Write PCI config space
 */

static int iSeries_pci_write_config(struct pci_bus *bus, unsigned int devfn,
                int offset, int size, u32 val)
{
        struct device_node *node = find_Device_Node(bus->number, devfn);
        u64 fn;
        u64 ret;

        if (node == NULL)
                return PCIBIOS_DEVICE_NOT_FOUND;
        if (offset > 255)
                return PCIBIOS_BAD_REGISTER_NUMBER;

        fn = hv_cfg_write_func[(size - 1) & 3];
        ret = HvCall4(fn, iseries_ds_addr(node), offset, val, 0);

        if (ret != 0)
                return PCIBIOS_DEVICE_NOT_FOUND;

        return 0;
}

static struct pci_ops iSeries_pci_ops = {
        .read = iSeries_pci_read_config,
        .write = iSeries_pci_write_config
};

/*
 * Check Return Code
 * -> On Failure, print and log information.
 *    Increment Retry Count, if exceeds max, panic partition.
 *
 * PCI: Device 23.90 ReadL I/O Error( 0): 0x1234
 * PCI: Device 23.90 ReadL Retry( 1)
 * PCI: Device 23.90 ReadL Retry Successful(1)
 */
static int CheckReturnCode(char *TextHdr, struct device_node *DevNode,
                int *retry, u64 ret)
{
        if (ret != 0)  {
                struct pci_dn *pdn = PCI_DN(DevNode);

                (*retry)++;
                printk("PCI: %s: Device 0x%04X:%02X  I/O Error(%2d): 0x%04X\n",
                                TextHdr, pdn->busno, pdn->devfn,
                                *retry, (int)ret);
                /*
                 * Bump the retry and check for retry count exceeded.
                 * If, Exceeded, panic the system.
                 */
                if (((*retry) > Pci_Retry_Max) &&
                                (Pci_Error_Flag > 0)) {
                        mf_display_src(0xB6000103);
                        panic_timeout = 0;
                        panic("PCI: Hardware I/O Error, SRC B6000103, "
                                        "Automatic Reboot Disabled.\n");
                }
                return -1;      /* Retry Try */
        }
        return 0;
}

/*
 * Translate the I/O Address into a device node, bar, and bar offset.
 * Note: Make sure the passed variable end up on the stack to avoid
 * the exposure of being device global.
 */
static inline struct device_node *xlate_iomm_address(
                const volatile void __iomem *IoAddress,
                u64 *dsaptr, u64 *BarOffsetPtr)
{
        unsigned long OrigIoAddr;
        unsigned long BaseIoAddr;
        unsigned long TableIndex;
        struct device_node *DevNode;

        OrigIoAddr = (unsigned long __force)IoAddress;
        if ((OrigIoAddr < BASE_IO_MEMORY) || (OrigIoAddr >= max_io_memory))
                return NULL;
        BaseIoAddr = OrigIoAddr - BASE_IO_MEMORY;
        TableIndex = BaseIoAddr / IOMM_TABLE_ENTRY_SIZE;
        DevNode = iomm_table[TableIndex];

        if (DevNode != NULL) {
                int barnum = iobar_table[TableIndex];
                *dsaptr = iseries_ds_addr(DevNode) | (barnum << 24);
                *BarOffsetPtr = BaseIoAddr % IOMM_TABLE_ENTRY_SIZE;
        } else
                panic("PCI: Invalid PCI IoAddress detected!\n");
        return DevNode;
}

/*
 * Read MM I/O Instructions for the iSeries
 * On MM I/O error, all ones are returned and iSeries_pci_IoError is cal
 * else, data is returned in big Endian format.
 *
 * iSeries_Read_Byte = Read Byte  ( 8 bit)
 * iSeries_Read_Word = Read Word  (16 bit)
 * iSeries_Read_Long = Read Long  (32 bit)
 */
u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress)
{
        u64 BarOffset;
        u64 dsa;
        int retry = 0;
        struct HvCallPci_LoadReturn ret;
        struct device_node *DevNode =
                xlate_iomm_address(IoAddress, &dsa, &BarOffset);

        if (DevNode == NULL) {
                static unsigned long last_jiffies;
                static int num_printed;

                if ((jiffies - last_jiffies) > 60 * HZ) {
                        last_jiffies = jiffies;
                        num_printed = 0;
                }
                if (num_printed++ < 10)
                        printk(KERN_ERR "iSeries_Read_Byte: invalid access at IO address %p\n", IoAddress);
                return 0xff;
        }
        do {
                HvCall3Ret16(HvCallPciBarLoad8, &ret, dsa, BarOffset, 0);
        } while (CheckReturnCode("RDB", DevNode, &retry, ret.rc) != 0);

        return (u8)ret.value;
}
EXPORT_SYMBOL(iSeries_Read_Byte);

u16 iSeries_Read_Word(const volatile void __iomem *IoAddress)
{
        u64 BarOffset;
        u64 dsa;
        int retry = 0;
        struct HvCallPci_LoadReturn ret;
        struct device_node *DevNode =
                xlate_iomm_address(IoAddress, &dsa, &BarOffset);

        if (DevNode == NULL) {
                static unsigned long last_jiffies;
                static int num_printed;

                if ((jiffies - last_jiffies) > 60 * HZ) {
                        last_jiffies = jiffies;
                        num_printed = 0;
                }
                if (num_printed++ < 10)
                        printk(KERN_ERR "iSeries_Read_Word: invalid access at IO address %p\n", IoAddress);
                return 0xffff;
        }
        do {
                HvCall3Ret16(HvCallPciBarLoad16, &ret, dsa,
                                BarOffset, 0);
        } while (CheckReturnCode("RDW", DevNode, &retry, ret.rc) != 0);

        return swab16((u16)ret.value);
}
EXPORT_SYMBOL(iSeries_Read_Word);

u32 iSeries_Read_Long(const volatile void __iomem *IoAddress)
{
        u64 BarOffset;
        u64 dsa;
        int retry = 0;
        struct HvCallPci_LoadReturn ret;
        struct device_node *DevNode =
                xlate_iomm_address(IoAddress, &dsa, &BarOffset);

        if (DevNode == NULL) {
                static unsigned long last_jiffies;
                static int num_printed;

                if ((jiffies - last_jiffies) > 60 * HZ) {
                        last_jiffies = jiffies;
                        num_printed = 0;
                }
                if (num_printed++ < 10)
                        printk(KERN_ERR "iSeries_Read_Long: invalid access at IO address %p\n", IoAddress);
                return 0xffffffff;
        }
        do {
                HvCall3Ret16(HvCallPciBarLoad32, &ret, dsa,
                                BarOffset, 0);
        } while (CheckReturnCode("RDL", DevNode, &retry, ret.rc) != 0);

        return swab32((u32)ret.value);
}
EXPORT_SYMBOL(iSeries_Read_Long);

/*
 * Write MM I/O Instructions for the iSeries
 *
 * iSeries_Write_Byte = Write Byte (8 bit)
 * iSeries_Write_Word = Write Word(16 bit)
 * iSeries_Write_Long = Write Long(32 bit)
 */
void iSeries_Write_Byte(u8 data, volatile void __iomem *IoAddress)
{
        u64 BarOffset;
        u64 dsa;
        int retry = 0;
        u64 rc;
        struct device_node *DevNode =
                xlate_iomm_address(IoAddress, &dsa, &BarOffset);

        if (DevNode == NULL) {
                static unsigned long last_jiffies;
                static int num_printed;

                if ((jiffies - last_jiffies) > 60 * HZ) {
                        last_jiffies = jiffies;
                        num_printed = 0;
                }
                if (num_printed++ < 10)
                        printk(KERN_ERR "iSeries_Write_Byte: invalid access at IO address %p\n", IoAddress);
                return;
        }
        do {
                rc = HvCall4(HvCallPciBarStore8, dsa, BarOffset, data, 0);
        } while (CheckReturnCode("WWB", DevNode, &retry, rc) != 0);
}
EXPORT_SYMBOL(iSeries_Write_Byte);

void iSeries_Write_Word(u16 data, volatile void __iomem *IoAddress)
{
        u64 BarOffset;
        u64 dsa;
        int retry = 0;
        u64 rc;
        struct device_node *DevNode =
                xlate_iomm_address(IoAddress, &dsa, &BarOffset);

        if (DevNode == NULL) {
                static unsigned long last_jiffies;
                static int num_printed;

                if ((jiffies - last_jiffies) > 60 * HZ) {
                        last_jiffies = jiffies;
                        num_printed = 0;
                }
                if (num_printed++ < 10)
                        printk(KERN_ERR "iSeries_Write_Word: invalid access at IO address %p\n", IoAddress);
                return;
        }
        do {
                rc = HvCall4(HvCallPciBarStore16, dsa, BarOffset, swab16(data), 0);
        } while (CheckReturnCode("WWW", DevNode, &retry, rc) != 0);
}
EXPORT_SYMBOL(iSeries_Write_Word);

void iSeries_Write_Long(u32 data, volatile void __iomem *IoAddress)
{
        u64 BarOffset;
        u64 dsa;
        int retry = 0;
        u64 rc;
        struct device_node *DevNode =
                xlate_iomm_address(IoAddress, &dsa, &BarOffset);

        if (DevNode == NULL) {
                static unsigned long last_jiffies;
                static int num_printed;

                if ((jiffies - last_jiffies) > 60 * HZ) {
                        last_jiffies = jiffies;
                        num_printed = 0;
                }
                if (num_printed++ < 10)
                        printk(KERN_ERR "iSeries_Write_Long: invalid access at IO address %p\n", IoAddress);
                return;
        }
        do {
                rc = HvCall4(HvCallPciBarStore32, dsa, BarOffset, swab32(data), 0);
        } while (CheckReturnCode("WWL", DevNode, &retry, rc) != 0);
}
EXPORT_SYMBOL(iSeries_Write_Long);