?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
V4L/DVB (6715): ivtv: Remove unnecessary register update
[linux-2.6/verdex.git] / drivers / ata / sata_mv.c
blob37b850ae084559d573e125a096cbdfe0eac3f958
1 /*
2 * sata_mv.c - Marvell SATA support
3 *
4 * Copyright 2005: EMC Corporation, all rights reserved.
5 * Copyright 2005 Red Hat, Inc. All rights reserved.
6 *
7 * Please ALWAYS copy linux-ide@vger.kernel.org on emails.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; version 2 of the License.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 *
22 */
23
24 /*
25 sata_mv TODO list:
26
27 1) Needs a full errata audit for all chipsets. I implemented most
28 of the errata workarounds found in the Marvell vendor driver, but
29 I distinctly remember a couple workarounds (one related to PCI-X)
30 are still needed.
31
32 4) Add NCQ support (easy to intermediate, once new-EH support appears)
33
34 5) Investigate problems with PCI Message Signalled Interrupts (MSI).
35
36 6) Add port multiplier support (intermediate)
37
38 8) Develop a low-power-consumption strategy, and implement it.
39
40 9) [Experiment, low priority] See if ATAPI can be supported using
41 "unknown FIS" or "vendor-specific FIS" support, or something creative
42 like that.
43
44 10) [Experiment, low priority] Investigate interrupt coalescing.
45 Quite often, especially with PCI Message Signalled Interrupts (MSI),
46 the overhead reduced by interrupt mitigation is quite often not
47 worth the latency cost.
48
49 11) [Experiment, Marvell value added] Is it possible to use target
50 mode to cross-connect two Linux boxes with Marvell cards? If so,
51 creating LibATA target mode support would be very interesting.
52
53 Target mode, for those without docs, is the ability to directly
54 connect two SATA controllers.
55
56 13) Verify that 7042 is fully supported. I only have a 6042.
57
58 */
59
60
61 #include <linux/kernel.h>
62 #include <linux/module.h>
63 #include <linux/pci.h>
64 #include <linux/init.h>
65 #include <linux/blkdev.h>
66 #include <linux/delay.h>
67 #include <linux/interrupt.h>
68 #include <linux/dma-mapping.h>
69 #include <linux/device.h>
70 #include <scsi/scsi_host.h>
71 #include <scsi/scsi_cmnd.h>
72 #include <scsi/scsi_device.h>
73 #include <linux/libata.h>
74
75 #define DRV_NAME "sata_mv"
76 #define DRV_VERSION "1.01"
77
78 enum {
79 /* BAR's are enumerated in terms of pci_resource_start() terms */
80 MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */
81 MV_IO_BAR = 2, /* offset 0x18: IO space */
82 MV_MISC_BAR = 3, /* offset 0x1c: FLASH, NVRAM, SRAM */
83
84 MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */
85 MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */
86
87 MV_PCI_REG_BASE = 0,
88 MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */
89 MV_IRQ_COAL_CAUSE = (MV_IRQ_COAL_REG_BASE + 0x08),
90 MV_IRQ_COAL_CAUSE_LO = (MV_IRQ_COAL_REG_BASE + 0x88),
91 MV_IRQ_COAL_CAUSE_HI = (MV_IRQ_COAL_REG_BASE + 0x8c),
92 MV_IRQ_COAL_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xcc),
93 MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0),
94
95 MV_SATAHC0_REG_BASE = 0x20000,
96 MV_FLASH_CTL = 0x1046c,
97 MV_GPIO_PORT_CTL = 0x104f0,
98 MV_RESET_CFG = 0x180d8,
99
100 MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ,
101 MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ,
102 MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */
103 MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ,
104
105 MV_MAX_Q_DEPTH = 32,
106 MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1,
107
108 /* CRQB needs alignment on a 1KB boundary. Size == 1KB
109 * CRPB needs alignment on a 256B boundary. Size == 256B
110 * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB
111 * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B
112 */
113 MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH),
114 MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH),
115 MV_MAX_SG_CT = 176,
116 MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT),
117 MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ),
118
119 MV_PORTS_PER_HC = 4,
120 /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */
121 MV_PORT_HC_SHIFT = 2,
122 /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */
123 MV_PORT_MASK = 3,
124
125 /* Host Flags */
126 MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
127 MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
128 MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
129 ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
130 ATA_FLAG_PIO_POLLING,
131 MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE,
132
133 CRQB_FLAG_READ = (1 << 0),
134 CRQB_TAG_SHIFT = 1,
135 CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */
136 CRQB_HOSTQ_SHIFT = 17, /* CRQB Gen-II/IIE HostQueTag shift */
137 CRQB_CMD_ADDR_SHIFT = 8,
138 CRQB_CMD_CS = (0x2 << 11),
139 CRQB_CMD_LAST = (1 << 15),
140
141 CRPB_FLAG_STATUS_SHIFT = 8,
142 CRPB_IOID_SHIFT_6 = 5, /* CRPB Gen-II IO Id shift */
143 CRPB_IOID_SHIFT_7 = 7, /* CRPB Gen-IIE IO Id shift */
144
145 EPRD_FLAG_END_OF_TBL = (1 << 31),
146
147 /* PCI interface registers */
148
149 PCI_COMMAND_OFS = 0xc00,
150
151 PCI_MAIN_CMD_STS_OFS = 0xd30,
152 STOP_PCI_MASTER = (1 << 2),
153 PCI_MASTER_EMPTY = (1 << 3),
154 GLOB_SFT_RST = (1 << 4),
155
156 MV_PCI_MODE = 0xd00,
157 MV_PCI_EXP_ROM_BAR_CTL = 0xd2c,
158 MV_PCI_DISC_TIMER = 0xd04,
159 MV_PCI_MSI_TRIGGER = 0xc38,
160 MV_PCI_SERR_MASK = 0xc28,
161 MV_PCI_XBAR_TMOUT = 0x1d04,
162 MV_PCI_ERR_LOW_ADDRESS = 0x1d40,
163 MV_PCI_ERR_HIGH_ADDRESS = 0x1d44,
164 MV_PCI_ERR_ATTRIBUTE = 0x1d48,
165 MV_PCI_ERR_COMMAND = 0x1d50,
166
167 PCI_IRQ_CAUSE_OFS = 0x1d58,
168 PCI_IRQ_MASK_OFS = 0x1d5c,
169 PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */
170
171 PCIE_IRQ_CAUSE_OFS = 0x1900,
172 PCIE_IRQ_MASK_OFS = 0x1910,
173 PCIE_UNMASK_ALL_IRQS = 0x70a, /* assorted bits */
174
175 HC_MAIN_IRQ_CAUSE_OFS = 0x1d60,
176 HC_MAIN_IRQ_MASK_OFS = 0x1d64,
177 PORT0_ERR = (1 << 0), /* shift by port # */
178 PORT0_DONE = (1 << 1), /* shift by port # */
179 HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */
180 HC_SHIFT = 9, /* bits 9-17 = HC1's ports */
181 PCI_ERR = (1 << 18),
182 TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */
183 TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */
184 PORTS_0_3_COAL_DONE = (1 << 8),
185 PORTS_4_7_COAL_DONE = (1 << 17),
186 PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */
187 GPIO_INT = (1 << 22),
188 SELF_INT = (1 << 23),
189 TWSI_INT = (1 << 24),
190 HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */
191 HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */
192 HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE |
193 PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT |
194 HC_MAIN_RSVD),
195 HC_MAIN_MASKED_IRQS_5 = (PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
196 HC_MAIN_RSVD_5),
197
198 /* SATAHC registers */
199 HC_CFG_OFS = 0,
200
201 HC_IRQ_CAUSE_OFS = 0x14,
202 CRPB_DMA_DONE = (1 << 0), /* shift by port # */
203 HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */
204 DEV_IRQ = (1 << 8), /* shift by port # */
205
206 /* Shadow block registers */
207 SHD_BLK_OFS = 0x100,
208 SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */
209
210 /* SATA registers */
211 SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
212 SATA_ACTIVE_OFS = 0x350,
213 PHY_MODE3 = 0x310,
214 PHY_MODE4 = 0x314,
215 PHY_MODE2 = 0x330,
216 MV5_PHY_MODE = 0x74,
217 MV5_LT_MODE = 0x30,
218 MV5_PHY_CTL = 0x0C,
219 SATA_INTERFACE_CTL = 0x050,
220
221 MV_M2_PREAMP_MASK = 0x7e0,
222
223 /* Port registers */
224 EDMA_CFG_OFS = 0,
225 EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */
226 EDMA_CFG_NCQ = (1 << 5),
227 EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
228 EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
229 EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
230
231 EDMA_ERR_IRQ_CAUSE_OFS = 0x8,
232 EDMA_ERR_IRQ_MASK_OFS = 0xc,
233 EDMA_ERR_D_PAR = (1 << 0), /* UDMA data parity err */
234 EDMA_ERR_PRD_PAR = (1 << 1), /* UDMA PRD parity err */
235 EDMA_ERR_DEV = (1 << 2), /* device error */
236 EDMA_ERR_DEV_DCON = (1 << 3), /* device disconnect */
237 EDMA_ERR_DEV_CON = (1 << 4), /* device connected */
238 EDMA_ERR_SERR = (1 << 5), /* SError bits [WBDST] raised */
239 EDMA_ERR_SELF_DIS = (1 << 7), /* Gen II/IIE self-disable */
240 EDMA_ERR_SELF_DIS_5 = (1 << 8), /* Gen I self-disable */
241 EDMA_ERR_BIST_ASYNC = (1 << 8), /* BIST FIS or Async Notify */
242 EDMA_ERR_TRANS_IRQ_7 = (1 << 8), /* Gen IIE transprt layer irq */
243 EDMA_ERR_CRQB_PAR = (1 << 9), /* CRQB parity error */
244 EDMA_ERR_CRPB_PAR = (1 << 10), /* CRPB parity error */
245 EDMA_ERR_INTRL_PAR = (1 << 11), /* internal parity error */
246 EDMA_ERR_IORDY = (1 << 12), /* IORdy timeout */
247 EDMA_ERR_LNK_CTRL_RX = (0xf << 13), /* link ctrl rx error */
248 EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15),
249 EDMA_ERR_LNK_DATA_RX = (0xf << 17), /* link data rx error */
250 EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), /* link ctrl tx error */
251 EDMA_ERR_LNK_DATA_TX = (0x1f << 26), /* link data tx error */
252 EDMA_ERR_TRANS_PROTO = (1 << 31), /* transport protocol error */
253 EDMA_ERR_OVERRUN_5 = (1 << 5),
254 EDMA_ERR_UNDERRUN_5 = (1 << 6),
255 EDMA_EH_FREEZE = EDMA_ERR_D_PAR |
256 EDMA_ERR_PRD_PAR |
257 EDMA_ERR_DEV_DCON |
258 EDMA_ERR_DEV_CON |
259 EDMA_ERR_SERR |
260 EDMA_ERR_SELF_DIS |
261 EDMA_ERR_CRQB_PAR |
262 EDMA_ERR_CRPB_PAR |
263 EDMA_ERR_INTRL_PAR |
264 EDMA_ERR_IORDY |
265 EDMA_ERR_LNK_CTRL_RX_2 |
266 EDMA_ERR_LNK_DATA_RX |
267 EDMA_ERR_LNK_DATA_TX |
268 EDMA_ERR_TRANS_PROTO,
269 EDMA_EH_FREEZE_5 = EDMA_ERR_D_PAR |
270 EDMA_ERR_PRD_PAR |
271 EDMA_ERR_DEV_DCON |
272 EDMA_ERR_DEV_CON |
273 EDMA_ERR_OVERRUN_5 |
274 EDMA_ERR_UNDERRUN_5 |
275 EDMA_ERR_SELF_DIS_5 |
276 EDMA_ERR_CRQB_PAR |
277 EDMA_ERR_CRPB_PAR |
278 EDMA_ERR_INTRL_PAR |
279 EDMA_ERR_IORDY,
280
281 EDMA_REQ_Q_BASE_HI_OFS = 0x10,
282 EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */
283
284 EDMA_REQ_Q_OUT_PTR_OFS = 0x18,
285 EDMA_REQ_Q_PTR_SHIFT = 5,
286
287 EDMA_RSP_Q_BASE_HI_OFS = 0x1c,
288 EDMA_RSP_Q_IN_PTR_OFS = 0x20,
289 EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */
290 EDMA_RSP_Q_PTR_SHIFT = 3,
291
292 EDMA_CMD_OFS = 0x28, /* EDMA command register */
293 EDMA_EN = (1 << 0), /* enable EDMA */
294 EDMA_DS = (1 << 1), /* disable EDMA; self-negated */
295 ATA_RST = (1 << 2), /* reset trans/link/phy */
296
297 EDMA_IORDY_TMOUT = 0x34,
298 EDMA_ARB_CFG = 0x38,
299
300 /* Host private flags (hp_flags) */
301 MV_HP_FLAG_MSI = (1 << 0),
302 MV_HP_ERRATA_50XXB0 = (1 << 1),
303 MV_HP_ERRATA_50XXB2 = (1 << 2),
304 MV_HP_ERRATA_60X1B2 = (1 << 3),
305 MV_HP_ERRATA_60X1C0 = (1 << 4),
306 MV_HP_ERRATA_XX42A0 = (1 << 5),
307 MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */
308 MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */
309 MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */
310 MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */
311
312 /* Port private flags (pp_flags) */
313 MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
314 MV_PP_FLAG_HAD_A_RESET = (1 << 2), /* 1st hard reset complete? */
315 };
316
317 #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
318 #define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
319 #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
320
321 enum {
322 /* DMA boundary 0xffff is required by the s/g splitting
323 * we need on /length/ in mv_fill-sg().
324 */
325 MV_DMA_BOUNDARY = 0xffffU,
326
327 /* mask of register bits containing lower 32 bits
328 * of EDMA request queue DMA address
329 */
330 EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
331
332 /* ditto, for response queue */
333 EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U,
334 };
335
336 enum chip_type {
337 chip_504x,
338 chip_508x,
339 chip_5080,
340 chip_604x,
341 chip_608x,
342 chip_6042,
343 chip_7042,
344 };
345
346 /* Command ReQuest Block: 32B */
347 struct mv_crqb {
348 __le32 sg_addr;
349 __le32 sg_addr_hi;
350 __le16 ctrl_flags;
351 __le16 ata_cmd[11];
352 };
353
354 struct mv_crqb_iie {
355 __le32 addr;
356 __le32 addr_hi;
357 __le32 flags;
358 __le32 len;
359 __le32 ata_cmd[4];
360 };
361
362 /* Command ResPonse Block: 8B */
363 struct mv_crpb {
364 __le16 id;
365 __le16 flags;
366 __le32 tmstmp;
367 };
368
369 /* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */
370 struct mv_sg {
371 __le32 addr;
372 __le32 flags_size;
373 __le32 addr_hi;
374 __le32 reserved;
375 };
376
377 struct mv_port_priv {
378 struct mv_crqb *crqb;
379 dma_addr_t crqb_dma;
380 struct mv_crpb *crpb;
381 dma_addr_t crpb_dma;
382 struct mv_sg *sg_tbl;
383 dma_addr_t sg_tbl_dma;
384
385 unsigned int req_idx;
386 unsigned int resp_idx;
387
388 u32 pp_flags;
389 };
390
391 struct mv_port_signal {
392 u32 amps;
393 u32 pre;
394 };
395
396 struct mv_host_priv {
397 u32 hp_flags;
398 struct mv_port_signal signal[8];
399 const struct mv_hw_ops *ops;
400 u32 irq_cause_ofs;
401 u32 irq_mask_ofs;
402 u32 unmask_all_irqs;
403 };
404
405 struct mv_hw_ops {
406 void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio,
407 unsigned int port);
408 void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio);
409 void (*read_preamp)(struct mv_host_priv *hpriv, int idx,
410 void __iomem *mmio);
411 int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio,
412 unsigned int n_hc);
413 void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio);
414 void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio);
415 };
416
417 static void mv_irq_clear(struct ata_port *ap);
418 static int mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
419 static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
420 static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
421 static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
422 static int mv_port_start(struct ata_port *ap);
423 static void mv_port_stop(struct ata_port *ap);
424 static void mv_qc_prep(struct ata_queued_cmd *qc);
425 static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
426 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
427 static void mv_error_handler(struct ata_port *ap);
428 static void mv_post_int_cmd(struct ata_queued_cmd *qc);
429 static void mv_eh_freeze(struct ata_port *ap);
430 static void mv_eh_thaw(struct ata_port *ap);
431 static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
432
433 static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
434 unsigned int port);
435 static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
436 static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
437 void __iomem *mmio);
438 static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
439 unsigned int n_hc);
440 static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
441 static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio);
442
443 static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
444 unsigned int port);
445 static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
446 static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
447 void __iomem *mmio);
448 static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
449 unsigned int n_hc);
450 static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
451 static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio);
452 static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
453 unsigned int port_no);
454
455 static struct scsi_host_template mv5_sht = {
456 .module = THIS_MODULE,
457 .name = DRV_NAME,
458 .ioctl = ata_scsi_ioctl,
459 .queuecommand = ata_scsi_queuecmd,
460 .can_queue = ATA_DEF_QUEUE,
461 .this_id = ATA_SHT_THIS_ID,
462 .sg_tablesize = MV_MAX_SG_CT / 2,
463 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
464 .emulated = ATA_SHT_EMULATED,
465 .use_clustering = 1,
466 .proc_name = DRV_NAME,
467 .dma_boundary = MV_DMA_BOUNDARY,
468 .slave_configure = ata_scsi_slave_config,
469 .slave_destroy = ata_scsi_slave_destroy,
470 .bios_param = ata_std_bios_param,
471 };
472
473 static struct scsi_host_template mv6_sht = {
474 .module = THIS_MODULE,
475 .name = DRV_NAME,
476 .ioctl = ata_scsi_ioctl,
477 .queuecommand = ata_scsi_queuecmd,
478 .can_queue = ATA_DEF_QUEUE,
479 .this_id = ATA_SHT_THIS_ID,
480 .sg_tablesize = MV_MAX_SG_CT / 2,
481 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
482 .emulated = ATA_SHT_EMULATED,
483 .use_clustering = 1,
484 .proc_name = DRV_NAME,
485 .dma_boundary = MV_DMA_BOUNDARY,
486 .slave_configure = ata_scsi_slave_config,
487 .slave_destroy = ata_scsi_slave_destroy,
488 .bios_param = ata_std_bios_param,
489 };
490
491 static const struct ata_port_operations mv5_ops = {
492 .tf_load = ata_tf_load,
493 .tf_read = ata_tf_read,
494 .check_status = ata_check_status,
495 .exec_command = ata_exec_command,
496 .dev_select = ata_std_dev_select,
497
498 .cable_detect = ata_cable_sata,
499
500 .qc_prep = mv_qc_prep,
501 .qc_issue = mv_qc_issue,
502 .data_xfer = ata_data_xfer,
503
504 .irq_clear = mv_irq_clear,
505 .irq_on = ata_irq_on,
506
507 .error_handler = mv_error_handler,
508 .post_internal_cmd = mv_post_int_cmd,
509 .freeze = mv_eh_freeze,
510 .thaw = mv_eh_thaw,
511
512 .scr_read = mv5_scr_read,
513 .scr_write = mv5_scr_write,
514
515 .port_start = mv_port_start,
516 .port_stop = mv_port_stop,
517 };
518
519 static const struct ata_port_operations mv6_ops = {
520 .tf_load = ata_tf_load,
521 .tf_read = ata_tf_read,
522 .check_status = ata_check_status,
523 .exec_command = ata_exec_command,
524 .dev_select = ata_std_dev_select,
525
526 .cable_detect = ata_cable_sata,
527
528 .qc_prep = mv_qc_prep,
529 .qc_issue = mv_qc_issue,
530 .data_xfer = ata_data_xfer,
531
532 .irq_clear = mv_irq_clear,
533 .irq_on = ata_irq_on,
534
535 .error_handler = mv_error_handler,
536 .post_internal_cmd = mv_post_int_cmd,
537 .freeze = mv_eh_freeze,
538 .thaw = mv_eh_thaw,
539
540 .scr_read = mv_scr_read,
541 .scr_write = mv_scr_write,
542
543 .port_start = mv_port_start,
544 .port_stop = mv_port_stop,
545 };
546
547 static const struct ata_port_operations mv_iie_ops = {
548 .tf_load = ata_tf_load,
549 .tf_read = ata_tf_read,
550 .check_status = ata_check_status,
551 .exec_command = ata_exec_command,
552 .dev_select = ata_std_dev_select,
553
554 .cable_detect = ata_cable_sata,
555
556 .qc_prep = mv_qc_prep_iie,
557 .qc_issue = mv_qc_issue,
558 .data_xfer = ata_data_xfer,
559
560 .irq_clear = mv_irq_clear,
561 .irq_on = ata_irq_on,
562
563 .error_handler = mv_error_handler,
564 .post_internal_cmd = mv_post_int_cmd,
565 .freeze = mv_eh_freeze,
566 .thaw = mv_eh_thaw,
567
568 .scr_read = mv_scr_read,
569 .scr_write = mv_scr_write,
570
571 .port_start = mv_port_start,
572 .port_stop = mv_port_stop,
573 };
574
575 static const struct ata_port_info mv_port_info[] = {
576 { /* chip_504x */
577 .flags = MV_COMMON_FLAGS,
578 .pio_mask = 0x1f, /* pio0-4 */
579 .udma_mask = ATA_UDMA6,
580 .port_ops = &mv5_ops,
581 },
582 { /* chip_508x */
583 .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
584 .pio_mask = 0x1f, /* pio0-4 */
585 .udma_mask = ATA_UDMA6,
586 .port_ops = &mv5_ops,
587 },
588 { /* chip_5080 */
589 .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
590 .pio_mask = 0x1f, /* pio0-4 */
591 .udma_mask = ATA_UDMA6,
592 .port_ops = &mv5_ops,
593 },
594 { /* chip_604x */
595 .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS,
596 .pio_mask = 0x1f, /* pio0-4 */
597 .udma_mask = ATA_UDMA6,
598 .port_ops = &mv6_ops,
599 },
600 { /* chip_608x */
601 .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
602 MV_FLAG_DUAL_HC,
603 .pio_mask = 0x1f, /* pio0-4 */
604 .udma_mask = ATA_UDMA6,
605 .port_ops = &mv6_ops,
606 },
607 { /* chip_6042 */
608 .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS,
609 .pio_mask = 0x1f, /* pio0-4 */
610 .udma_mask = ATA_UDMA6,
611 .port_ops = &mv_iie_ops,
612 },
613 { /* chip_7042 */
614 .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS,
615 .pio_mask = 0x1f, /* pio0-4 */
616 .udma_mask = ATA_UDMA6,
617 .port_ops = &mv_iie_ops,
618 },
619 };
620
621 static const struct pci_device_id mv_pci_tbl[] = {
622 { PCI_VDEVICE(MARVELL, 0x5040), chip_504x },
623 { PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
624 { PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
625 { PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
626 /* RocketRAID 1740/174x have different identifiers */
627 { PCI_VDEVICE(TTI, 0x1740), chip_508x },
628 { PCI_VDEVICE(TTI, 0x1742), chip_508x },
629
630 { PCI_VDEVICE(MARVELL, 0x6040), chip_604x },
631 { PCI_VDEVICE(MARVELL, 0x6041), chip_604x },
632 { PCI_VDEVICE(MARVELL, 0x6042), chip_6042 },
633 { PCI_VDEVICE(MARVELL, 0x6080), chip_608x },
634 { PCI_VDEVICE(MARVELL, 0x6081), chip_608x },
635
636 { PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x },
637
638 /* Adaptec 1430SA */
639 { PCI_VDEVICE(ADAPTEC2, 0x0243), chip_7042 },
640
641 /* Marvell 7042 support */
642 { PCI_VDEVICE(MARVELL, 0x7042), chip_7042 },
643
644 /* Highpoint RocketRAID PCIe series */
645 { PCI_VDEVICE(TTI, 0x2300), chip_7042 },
646 { PCI_VDEVICE(TTI, 0x2310), chip_7042 },
647
648 { } /* terminate list */
649 };
650
651 static struct pci_driver mv_pci_driver = {
652 .name = DRV_NAME,
653 .id_table = mv_pci_tbl,
654 .probe = mv_init_one,
655 .remove = ata_pci_remove_one,
656 };
657
658 static const struct mv_hw_ops mv5xxx_ops = {
659 .phy_errata = mv5_phy_errata,
660 .enable_leds = mv5_enable_leds,
661 .read_preamp = mv5_read_preamp,
662 .reset_hc = mv5_reset_hc,
663 .reset_flash = mv5_reset_flash,
664 .reset_bus = mv5_reset_bus,
665 };
666
667 static const struct mv_hw_ops mv6xxx_ops = {
668 .phy_errata = mv6_phy_errata,
669 .enable_leds = mv6_enable_leds,
670 .read_preamp = mv6_read_preamp,
671 .reset_hc = mv6_reset_hc,
672 .reset_flash = mv6_reset_flash,
673 .reset_bus = mv_reset_pci_bus,
674 };
675
676 /*
677 * module options
678 */
679 static int msi; /* Use PCI msi; either zero (off, default) or non-zero */
680
681
682 /* move to PCI layer or libata core? */
683 static int pci_go_64(struct pci_dev *pdev)
684 {
685 int rc;
686
687 if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
688 rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
689 if (rc) {
690 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
691 if (rc) {
692 dev_printk(KERN_ERR, &pdev->dev,
693 "64-bit DMA enable failed\n");
694 return rc;
695 }
696 }
697 } else {
698 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
699 if (rc) {
700 dev_printk(KERN_ERR, &pdev->dev,
701 "32-bit DMA enable failed\n");
702 return rc;
703 }
704 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
705 if (rc) {
706 dev_printk(KERN_ERR, &pdev->dev,
707 "32-bit consistent DMA enable failed\n");
708 return rc;
709 }
710 }
711
712 return rc;
713 }
714
715 /*
716 * Functions
717 */
718
719 static inline void writelfl(unsigned long data, void __iomem *addr)
720 {
721 writel(data, addr);
722 (void) readl(addr); /* flush to avoid PCI posted write */
723 }
724
725 static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc)
726 {
727 return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
728 }
729
730 static inline unsigned int mv_hc_from_port(unsigned int port)
731 {
732 return port >> MV_PORT_HC_SHIFT;
733 }
734
735 static inline unsigned int mv_hardport_from_port(unsigned int port)
736 {
737 return port & MV_PORT_MASK;
738 }
739
740 static inline void __iomem *mv_hc_base_from_port(void __iomem *base,
741 unsigned int port)
742 {
743 return mv_hc_base(base, mv_hc_from_port(port));
744 }
745
746 static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port)
747 {
748 return mv_hc_base_from_port(base, port) +
749 MV_SATAHC_ARBTR_REG_SZ +
750 (mv_hardport_from_port(port) * MV_PORT_REG_SZ);
751 }
752
753 static inline void __iomem *mv_ap_base(struct ata_port *ap)
754 {
755 return mv_port_base(ap->host->iomap[MV_PRIMARY_BAR], ap->port_no);
756 }
757
758 static inline int mv_get_hc_count(unsigned long port_flags)
759 {
760 return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
761 }
762
763 static void mv_irq_clear(struct ata_port *ap)
764 {
765 }
766
767 static void mv_set_edma_ptrs(void __iomem *port_mmio,
768 struct mv_host_priv *hpriv,
769 struct mv_port_priv *pp)
770 {
771 u32 index;
772
773 /*
774 * initialize request queue
775 */
776 index = (pp->req_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_REQ_Q_PTR_SHIFT;
777
778 WARN_ON(pp->crqb_dma & 0x3ff);
779 writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
780 writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
781 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
782
783 if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
784 writelfl((pp->crqb_dma & 0xffffffff) | index,
785 port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
786 else
787 writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
788
789 /*
790 * initialize response queue
791 */
792 index = (pp->resp_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_RSP_Q_PTR_SHIFT;
793
794 WARN_ON(pp->crpb_dma & 0xff);
795 writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
796
797 if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
798 writelfl((pp->crpb_dma & 0xffffffff) | index,
799 port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
800 else
801 writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
802
803 writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
804 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
805 }
806
807 /**
808 * mv_start_dma - Enable eDMA engine
809 * @base: port base address
810 * @pp: port private data
811 *
812 * Verify the local cache of the eDMA state is accurate with a
813 * WARN_ON.
814 *
815 * LOCKING:
816 * Inherited from caller.
817 */
818 static void mv_start_dma(void __iomem *base, struct mv_host_priv *hpriv,
819 struct mv_port_priv *pp)
820 {
821 if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
822 /* clear EDMA event indicators, if any */
823 writelfl(0, base + EDMA_ERR_IRQ_CAUSE_OFS);
824
825 mv_set_edma_ptrs(base, hpriv, pp);
826
827 writelfl(EDMA_EN, base + EDMA_CMD_OFS);
828 pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
829 }
830 WARN_ON(!(EDMA_EN & readl(base + EDMA_CMD_OFS)));
831 }
832
833 /**
834 * __mv_stop_dma - Disable eDMA engine
835 * @ap: ATA channel to manipulate
836 *
837 * Verify the local cache of the eDMA state is accurate with a
838 * WARN_ON.
839 *
840 * LOCKING:
841 * Inherited from caller.
842 */
843 static int __mv_stop_dma(struct ata_port *ap)
844 {
845 void __iomem *port_mmio = mv_ap_base(ap);
846 struct mv_port_priv *pp = ap->private_data;
847 u32 reg;
848 int i, err = 0;
849
850 if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
851 /* Disable EDMA if active. The disable bit auto clears.
852 */
853 writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
854 pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
855 } else {
856 WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS));
857 }
858
859 /* now properly wait for the eDMA to stop */
860 for (i = 1000; i > 0; i--) {
861 reg = readl(port_mmio + EDMA_CMD_OFS);
862 if (!(reg & EDMA_EN))
863 break;
864
865 udelay(100);
866 }
867
868 if (reg & EDMA_EN) {
869 ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
870 err = -EIO;
871 }
872
873 return err;
874 }
875
876 static int mv_stop_dma(struct ata_port *ap)
877 {
878 unsigned long flags;
879 int rc;
880
881 spin_lock_irqsave(&ap->host->lock, flags);
882 rc = __mv_stop_dma(ap);
883 spin_unlock_irqrestore(&ap->host->lock, flags);
884
885 return rc;
886 }
887
888 #ifdef ATA_DEBUG
889 static void mv_dump_mem(void __iomem *start, unsigned bytes)
890 {
891 int b, w;
892 for (b = 0; b < bytes; ) {
893 DPRINTK("%p: ", start + b);
894 for (w = 0; b < bytes && w < 4; w++) {
895 printk("%08x ", readl(start + b));
896 b += sizeof(u32);
897 }
898 printk("\n");
899 }
900 }
901 #endif
902
903 static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes)
904 {
905 #ifdef ATA_DEBUG
906 int b, w;
907 u32 dw;
908 for (b = 0; b < bytes; ) {
909 DPRINTK("%02x: ", b);
910 for (w = 0; b < bytes && w < 4; w++) {
911 (void) pci_read_config_dword(pdev, b, &dw);
912 printk("%08x ", dw);
913 b += sizeof(u32);
914 }
915 printk("\n");
916 }
917 #endif
918 }
919 static void mv_dump_all_regs(void __iomem *mmio_base, int port,
920 struct pci_dev *pdev)
921 {
922 #ifdef ATA_DEBUG
923 void __iomem *hc_base = mv_hc_base(mmio_base,
924 port >> MV_PORT_HC_SHIFT);
925 void __iomem *port_base;
926 int start_port, num_ports, p, start_hc, num_hcs, hc;
927
928 if (0 > port) {
929 start_hc = start_port = 0;
930 num_ports = 8; /* shld be benign for 4 port devs */
931 num_hcs = 2;
932 } else {
933 start_hc = port >> MV_PORT_HC_SHIFT;
934 start_port = port;
935 num_ports = num_hcs = 1;
936 }
937 DPRINTK("All registers for port(s) %u-%u:\n", start_port,
938 num_ports > 1 ? num_ports - 1 : start_port);
939
940 if (NULL != pdev) {
941 DPRINTK("PCI config space regs:\n");
942 mv_dump_pci_cfg(pdev, 0x68);
943 }
944 DPRINTK("PCI regs:\n");
945 mv_dump_mem(mmio_base+0xc00, 0x3c);
946 mv_dump_mem(mmio_base+0xd00, 0x34);
947 mv_dump_mem(mmio_base+0xf00, 0x4);
948 mv_dump_mem(mmio_base+0x1d00, 0x6c);
949 for (hc = start_hc; hc < start_hc + num_hcs; hc++) {
950 hc_base = mv_hc_base(mmio_base, hc);
951 DPRINTK("HC regs (HC %i):\n", hc);
952 mv_dump_mem(hc_base, 0x1c);
953 }
954 for (p = start_port; p < start_port + num_ports; p++) {
955 port_base = mv_port_base(mmio_base, p);
956 DPRINTK("EDMA regs (port %i):\n", p);
957 mv_dump_mem(port_base, 0x54);
958 DPRINTK("SATA regs (port %i):\n", p);
959 mv_dump_mem(port_base+0x300, 0x60);
960 }
961 #endif
962 }
963
964 static unsigned int mv_scr_offset(unsigned int sc_reg_in)
965 {
966 unsigned int ofs;
967
968 switch (sc_reg_in) {
969 case SCR_STATUS:
970 case SCR_CONTROL:
971 case SCR_ERROR:
972 ofs = SATA_STATUS_OFS + (sc_reg_in * sizeof(u32));
973 break;
974 case SCR_ACTIVE:
975 ofs = SATA_ACTIVE_OFS; /* active is not with the others */
976 break;
977 default:
978 ofs = 0xffffffffU;
979 break;
980 }
981 return ofs;
982 }
983
984 static int mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val)
985 {
986 unsigned int ofs = mv_scr_offset(sc_reg_in);
987
988 if (ofs != 0xffffffffU) {
989 *val = readl(mv_ap_base(ap) + ofs);
990 return 0;
991 } else
992 return -EINVAL;
993 }
994
995 static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
996 {
997 unsigned int ofs = mv_scr_offset(sc_reg_in);
998
999 if (ofs != 0xffffffffU) {
1000 writelfl(val, mv_ap_base(ap) + ofs);
1001 return 0;
1002 } else
1003 return -EINVAL;
1004 }
1005
1006 static void mv_edma_cfg(struct ata_port *ap, struct mv_host_priv *hpriv,
1007 void __iomem *port_mmio)
1008 {
1009 u32 cfg = readl(port_mmio + EDMA_CFG_OFS);
1010
1011 /* set up non-NCQ EDMA configuration */
1012 cfg &= ~(1 << 9); /* disable eQue */
1013
1014 if (IS_GEN_I(hpriv)) {
1015 cfg &= ~0x1f; /* clear queue depth */
1016 cfg |= (1 << 8); /* enab config burst size mask */
1017 }
1018
1019 else if (IS_GEN_II(hpriv)) {
1020 cfg &= ~0x1f; /* clear queue depth */
1021 cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
1022 cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */
1023 }
1024
1025 else if (IS_GEN_IIE(hpriv)) {
1026 cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
1027 cfg |= (1 << 22); /* enab 4-entry host queue cache */
1028 cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */
1029 cfg |= (1 << 18); /* enab early completion */
1030 cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */
1031 cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */
1032 cfg &= ~(EDMA_CFG_NCQ); /* clear NCQ */
1033 }
1034
1035 writelfl(cfg, port_mmio + EDMA_CFG_OFS);
1036 }
1037
1038 /**
1039 * mv_port_start - Port specific init/start routine.
1040 * @ap: ATA channel to manipulate
1041 *
1042 * Allocate and point to DMA memory, init port private memory,
1043 * zero indices.
1044 *
1045 * LOCKING:
1046 * Inherited from caller.
1047 */
1048 static int mv_port_start(struct ata_port *ap)
1049 {
1050 struct device *dev = ap->host->dev;
1051 struct mv_host_priv *hpriv = ap->host->private_data;
1052 struct mv_port_priv *pp;
1053 void __iomem *port_mmio = mv_ap_base(ap);
1054 void *mem;
1055 dma_addr_t mem_dma;
1056 unsigned long flags;
1057 int rc;
1058
1059 pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
1060 if (!pp)
1061 return -ENOMEM;
1062
1063 mem = dmam_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma,
1064 GFP_KERNEL);
1065 if (!mem)
1066 return -ENOMEM;
1067 memset(mem, 0, MV_PORT_PRIV_DMA_SZ);
1068
1069 rc = ata_pad_alloc(ap, dev);
1070 if (rc)
1071 return rc;
1072
1073 /* First item in chunk of DMA memory:
1074 * 32-slot command request table (CRQB), 32 bytes each in size
1075 */
1076 pp->crqb = mem;
1077 pp->crqb_dma = mem_dma;
1078 mem += MV_CRQB_Q_SZ;
1079 mem_dma += MV_CRQB_Q_SZ;
1080
1081 /* Second item:
1082 * 32-slot command response table (CRPB), 8 bytes each in size
1083 */
1084 pp->crpb = mem;
1085 pp->crpb_dma = mem_dma;
1086 mem += MV_CRPB_Q_SZ;
1087 mem_dma += MV_CRPB_Q_SZ;
1088
1089 /* Third item:
1090 * Table of scatter-gather descriptors (ePRD), 16 bytes each
1091 */
1092 pp->sg_tbl = mem;
1093 pp->sg_tbl_dma = mem_dma;
1094
1095 spin_lock_irqsave(&ap->host->lock, flags);
1096
1097 mv_edma_cfg(ap, hpriv, port_mmio);
1098
1099 mv_set_edma_ptrs(port_mmio, hpriv, pp);
1100
1101 spin_unlock_irqrestore(&ap->host->lock, flags);
1102
1103 /* Don't turn on EDMA here...do it before DMA commands only. Else
1104 * we'll be unable to send non-data, PIO, etc due to restricted access
1105 * to shadow regs.
1106 */
1107 ap->private_data = pp;
1108 return 0;
1109 }
1110
1111 /**
1112 * mv_port_stop - Port specific cleanup/stop routine.
1113 * @ap: ATA channel to manipulate
1114 *
1115 * Stop DMA, cleanup port memory.
1116 *
1117 * LOCKING:
1118 * This routine uses the host lock to protect the DMA stop.
1119 */
1120 static void mv_port_stop(struct ata_port *ap)
1121 {
1122 mv_stop_dma(ap);
1123 }
1124
1125 /**
1126 * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries
1127 * @qc: queued command whose SG list to source from
1128 *
1129 * Populate the SG list and mark the last entry.
1130 *
1131 * LOCKING:
1132 * Inherited from caller.
1133 */
1134 static void mv_fill_sg(struct ata_queued_cmd *qc)
1135 {
1136 struct mv_port_priv *pp = qc->ap->private_data;
1137 struct scatterlist *sg;
1138 struct mv_sg *mv_sg, *last_sg = NULL;
1139
1140 mv_sg = pp->sg_tbl;
1141 ata_for_each_sg(sg, qc) {
1142 dma_addr_t addr = sg_dma_address(sg);
1143 u32 sg_len = sg_dma_len(sg);
1144
1145 while (sg_len) {
1146 u32 offset = addr & 0xffff;
1147 u32 len = sg_len;
1148
1149 if ((offset + sg_len > 0x10000))
1150 len = 0x10000 - offset;
1151
1152 mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
1153 mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
1154 mv_sg->flags_size = cpu_to_le32(len & 0xffff);
1155
1156 sg_len -= len;
1157 addr += len;
1158
1159 last_sg = mv_sg;
1160 mv_sg++;
1161 }
1162 }
1163
1164 if (likely(last_sg))
1165 last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
1166 }
1167
1168 static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
1169 {
1170 u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
1171 (last ? CRQB_CMD_LAST : 0);
1172 *cmdw = cpu_to_le16(tmp);
1173 }
1174
1175 /**
1176 * mv_qc_prep - Host specific command preparation.
1177 * @qc: queued command to prepare
1178 *
1179 * This routine simply redirects to the general purpose routine
1180 * if command is not DMA. Else, it handles prep of the CRQB
1181 * (command request block), does some sanity checking, and calls
1182 * the SG load routine.
1183 *
1184 * LOCKING:
1185 * Inherited from caller.
1186 */
1187 static void mv_qc_prep(struct ata_queued_cmd *qc)
1188 {
1189 struct ata_port *ap = qc->ap;
1190 struct mv_port_priv *pp = ap->private_data;
1191 __le16 *cw;
1192 struct ata_taskfile *tf;
1193 u16 flags = 0;
1194 unsigned in_index;
1195
1196 if (qc->tf.protocol != ATA_PROT_DMA)
1197 return;
1198
1199 /* Fill in command request block
1200 */
1201 if (!(qc->tf.flags & ATA_TFLAG_WRITE))
1202 flags |= CRQB_FLAG_READ;
1203 WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
1204 flags |= qc->tag << CRQB_TAG_SHIFT;
1205 flags |= qc->tag << CRQB_IOID_SHIFT; /* 50xx appears to ignore this*/
1206
1207 /* get current queue index from software */
1208 in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
1209
1210 pp->crqb[in_index].sg_addr =
1211 cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
1212 pp->crqb[in_index].sg_addr_hi =
1213 cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
1214 pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
1215
1216 cw = &pp->crqb[in_index].ata_cmd[0];
1217 tf = &qc->tf;
1218
1219 /* Sadly, the CRQB cannot accomodate all registers--there are
1220 * only 11 bytes...so we must pick and choose required
1221 * registers based on the command. So, we drop feature and
1222 * hob_feature for [RW] DMA commands, but they are needed for
1223 * NCQ. NCQ will drop hob_nsect.
1224 */
1225 switch (tf->command) {
1226 case ATA_CMD_READ:
1227 case ATA_CMD_READ_EXT:
1228 case ATA_CMD_WRITE:
1229 case ATA_CMD_WRITE_EXT:
1230 case ATA_CMD_WRITE_FUA_EXT:
1231 mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0);
1232 break;
1233 #ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */
1234 case ATA_CMD_FPDMA_READ:
1235 case ATA_CMD_FPDMA_WRITE:
1236 mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0);
1237 mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0);
1238 break;
1239 #endif /* FIXME: remove this line when NCQ added */
1240 default:
1241 /* The only other commands EDMA supports in non-queued and
1242 * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
1243 * of which are defined/used by Linux. If we get here, this
1244 * driver needs work.
1245 *
1246 * FIXME: modify libata to give qc_prep a return value and
1247 * return error here.
1248 */
1249 BUG_ON(tf->command);
1250 break;
1251 }
1252 mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0);
1253 mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0);
1254 mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0);
1255 mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0);
1256 mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0);
1257 mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0);
1258 mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0);
1259 mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0);
1260 mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */
1261
1262 if (!(qc->flags & ATA_QCFLAG_DMAMAP))
1263 return;
1264 mv_fill_sg(qc);
1265 }
1266
1267 /**
1268 * mv_qc_prep_iie - Host specific command preparation.
1269 * @qc: queued command to prepare
1270 *
1271 * This routine simply redirects to the general purpose routine
1272 * if command is not DMA. Else, it handles prep of the CRQB
1273 * (command request block), does some sanity checking, and calls
1274 * the SG load routine.
1275 *
1276 * LOCKING:
1277 * Inherited from caller.
1278 */
1279 static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
1280 {
1281 struct ata_port *ap = qc->ap;
1282 struct mv_port_priv *pp = ap->private_data;
1283 struct mv_crqb_iie *crqb;
1284 struct ata_taskfile *tf;
1285 unsigned in_index;
1286 u32 flags = 0;
1287
1288 if (qc->tf.protocol != ATA_PROT_DMA)
1289 return;
1290
1291 /* Fill in Gen IIE command request block
1292 */
1293 if (!(qc->tf.flags & ATA_TFLAG_WRITE))
1294 flags |= CRQB_FLAG_READ;
1295
1296 WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
1297 flags |= qc->tag << CRQB_TAG_SHIFT;
1298 flags |= qc->tag << CRQB_IOID_SHIFT; /* "I/O Id" is -really-
1299 what we use as our tag */
1300
1301 /* get current queue index from software */
1302 in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
1303
1304 crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
1305 crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
1306 crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
1307 crqb->flags = cpu_to_le32(flags);
1308
1309 tf = &qc->tf;
1310 crqb->ata_cmd[0] = cpu_to_le32(
1311 (tf->command << 16) |
1312 (tf->feature << 24)
1313 );
1314 crqb->ata_cmd[1] = cpu_to_le32(
1315 (tf->lbal << 0) |
1316 (tf->lbam << 8) |
1317 (tf->lbah << 16) |
1318 (tf->device << 24)
1319 );
1320 crqb->ata_cmd[2] = cpu_to_le32(
1321 (tf->hob_lbal << 0) |
1322 (tf->hob_lbam << 8) |
1323 (tf->hob_lbah << 16) |
1324 (tf->hob_feature << 24)
1325 );
1326 crqb->ata_cmd[3] = cpu_to_le32(
1327 (tf->nsect << 0) |
1328 (tf->hob_nsect << 8)
1329 );
1330
1331 if (!(qc->flags & ATA_QCFLAG_DMAMAP))
1332 return;
1333 mv_fill_sg(qc);
1334 }
1335
1336 /**
1337 * mv_qc_issue - Initiate a command to the host
1338 * @qc: queued command to start
1339 *
1340 * This routine simply redirects to the general purpose routine
1341 * if command is not DMA. Else, it sanity checks our local
1342 * caches of the request producer/consumer indices then enables
1343 * DMA and bumps the request producer index.
1344 *
1345 * LOCKING:
1346 * Inherited from caller.
1347 */
1348 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
1349 {
1350 struct ata_port *ap = qc->ap;
1351 void __iomem *port_mmio = mv_ap_base(ap);
1352 struct mv_port_priv *pp = ap->private_data;
1353 struct mv_host_priv *hpriv = ap->host->private_data;
1354 u32 in_index;
1355
1356 if (qc->tf.protocol != ATA_PROT_DMA) {
1357 /* We're about to send a non-EDMA capable command to the
1358 * port. Turn off EDMA so there won't be problems accessing
1359 * shadow block, etc registers.
1360 */
1361 __mv_stop_dma(ap);
1362 return ata_qc_issue_prot(qc);
1363 }
1364
1365 mv_start_dma(port_mmio, hpriv, pp);
1366
1367 in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
1368
1369 /* until we do queuing, the queue should be empty at this point */
1370 WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
1371 >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
1372
1373 pp->req_idx++;
1374
1375 in_index = (pp->req_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_REQ_Q_PTR_SHIFT;
1376
1377 /* and write the request in pointer to kick the EDMA to life */
1378 writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index,
1379 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
1380
1381 return 0;
1382 }
1383
1384 /**
1385 * mv_err_intr - Handle error interrupts on the port
1386 * @ap: ATA channel to manipulate
1387 * @reset_allowed: bool: 0 == don't trigger from reset here
1388 *
1389 * In most cases, just clear the interrupt and move on. However,
1390 * some cases require an eDMA reset, which is done right before
1391 * the COMRESET in mv_phy_reset(). The SERR case requires a
1392 * clear of pending errors in the SATA SERROR register. Finally,
1393 * if the port disabled DMA, update our cached copy to match.
1394 *
1395 * LOCKING:
1396 * Inherited from caller.
1397 */
1398 static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
1399 {
1400 void __iomem *port_mmio = mv_ap_base(ap);
1401 u32 edma_err_cause, eh_freeze_mask, serr = 0;
1402 struct mv_port_priv *pp = ap->private_data;
1403 struct mv_host_priv *hpriv = ap->host->private_data;
1404 unsigned int edma_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN);
1405 unsigned int action = 0, err_mask = 0;
1406 struct ata_eh_info *ehi = &ap->link.eh_info;
1407
1408 ata_ehi_clear_desc(ehi);
1409
1410 if (!edma_enabled) {
1411 /* just a guess: do we need to do this? should we
1412 * expand this, and do it in all cases?
1413 */
1414 sata_scr_read(&ap->link, SCR_ERROR, &serr);
1415 sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
1416 }
1417
1418 edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
1419
1420 ata_ehi_push_desc(ehi, "edma_err 0x%08x", edma_err_cause);
1421
1422 /*
1423 * all generations share these EDMA error cause bits
1424 */
1425
1426 if (edma_err_cause & EDMA_ERR_DEV)
1427 err_mask |= AC_ERR_DEV;
1428 if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
1429 EDMA_ERR_CRQB_PAR | EDMA_ERR_CRPB_PAR |
1430 EDMA_ERR_INTRL_PAR)) {
1431 err_mask |= AC_ERR_ATA_BUS;
1432 action |= ATA_EH_HARDRESET;
1433 ata_ehi_push_desc(ehi, "parity error");
1434 }
1435 if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) {
1436 ata_ehi_hotplugged(ehi);
1437 ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ?
1438 "dev disconnect" : "dev connect");
1439 }
1440
1441 if (IS_GEN_I(hpriv)) {
1442 eh_freeze_mask = EDMA_EH_FREEZE_5;
1443
1444 if (edma_err_cause & EDMA_ERR_SELF_DIS_5) {
1445 struct mv_port_priv *pp = ap->private_data;
1446 pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
1447 ata_ehi_push_desc(ehi, "EDMA self-disable");
1448 }
1449 } else {
1450 eh_freeze_mask = EDMA_EH_FREEZE;
1451
1452 if (edma_err_cause & EDMA_ERR_SELF_DIS) {
1453 struct mv_port_priv *pp = ap->private_data;
1454 pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
1455 ata_ehi_push_desc(ehi, "EDMA self-disable");
1456 }
1457
1458 if (edma_err_cause & EDMA_ERR_SERR) {
1459 sata_scr_read(&ap->link, SCR_ERROR, &serr);
1460 sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
1461 err_mask = AC_ERR_ATA_BUS;
1462 action |= ATA_EH_HARDRESET;
1463 }
1464 }
1465
1466 /* Clear EDMA now that SERR cleanup done */
1467 writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
1468
1469 if (!err_mask) {
1470 err_mask = AC_ERR_OTHER;
1471 action |= ATA_EH_HARDRESET;
1472 }
1473
1474 ehi->serror |= serr;
1475 ehi->action |= action;
1476
1477 if (qc)
1478 qc->err_mask |= err_mask;
1479 else
1480 ehi->err_mask |= err_mask;
1481
1482 if (edma_err_cause & eh_freeze_mask)
1483 ata_port_freeze(ap);
1484 else
1485 ata_port_abort(ap);
1486 }
1487
1488 static void mv_intr_pio(struct ata_port *ap)
1489 {
1490 struct ata_queued_cmd *qc;
1491 u8 ata_status;
1492
1493 /* ignore spurious intr if drive still BUSY */
1494 ata_status = readb(ap->ioaddr.status_addr);
1495 if (unlikely(ata_status & ATA_BUSY))
1496 return;
1497
1498 /* get active ATA command */
1499 qc = ata_qc_from_tag(ap, ap->link.active_tag);
1500 if (unlikely(!qc)) /* no active tag */
1501 return;
1502 if (qc->tf.flags & ATA_TFLAG_POLLING) /* polling; we don't own qc */
1503 return;
1504
1505 /* and finally, complete the ATA command */
1506 qc->err_mask |= ac_err_mask(ata_status);
1507 ata_qc_complete(qc);
1508 }
1509
1510 static void mv_intr_edma(struct ata_port *ap)
1511 {
1512 void __iomem *port_mmio = mv_ap_base(ap);
1513 struct mv_host_priv *hpriv = ap->host->private_data;
1514 struct mv_port_priv *pp = ap->private_data;
1515 struct ata_queued_cmd *qc;
1516 u32 out_index, in_index;
1517 bool work_done = false;
1518
1519 /* get h/w response queue pointer */
1520 in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
1521 >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
1522
1523 while (1) {
1524 u16 status;
1525 unsigned int tag;
1526
1527 /* get s/w response queue last-read pointer, and compare */
1528 out_index = pp->resp_idx & MV_MAX_Q_DEPTH_MASK;
1529 if (in_index == out_index)
1530 break;
1531
1532 /* 50xx: get active ATA command */
1533 if (IS_GEN_I(hpriv))
1534 tag = ap->link.active_tag;
1535
1536 /* Gen II/IIE: get active ATA command via tag, to enable
1537 * support for queueing. this works transparently for
1538 * queued and non-queued modes.
1539 */
1540 else if (IS_GEN_II(hpriv))
1541 tag = (le16_to_cpu(pp->crpb[out_index].id)
1542 >> CRPB_IOID_SHIFT_6) & 0x3f;
1543
1544 else /* IS_GEN_IIE */
1545 tag = (le16_to_cpu(pp->crpb[out_index].id)
1546 >> CRPB_IOID_SHIFT_7) & 0x3f;
1547
1548 qc = ata_qc_from_tag(ap, tag);
1549
1550 /* lower 8 bits of status are EDMA_ERR_IRQ_CAUSE_OFS
1551 * bits (WARNING: might not necessarily be associated
1552 * with this command), which -should- be clear
1553 * if all is well
1554 */
1555 status = le16_to_cpu(pp->crpb[out_index].flags);
1556 if (unlikely(status & 0xff)) {
1557 mv_err_intr(ap, qc);
1558 return;
1559 }
1560
1561 /* and finally, complete the ATA command */
1562 if (qc) {
1563 qc->err_mask |=
1564 ac_err_mask(status >> CRPB_FLAG_STATUS_SHIFT);
1565 ata_qc_complete(qc);
1566 }
1567
1568 /* advance software response queue pointer, to
1569 * indicate (after the loop completes) to hardware
1570 * that we have consumed a response queue entry.
1571 */
1572 work_done = true;
1573 pp->resp_idx++;
1574 }
1575
1576 if (work_done)
1577 writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) |
1578 (out_index << EDMA_RSP_Q_PTR_SHIFT),
1579 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
1580 }
1581
1582 /**
1583 * mv_host_intr - Handle all interrupts on the given host controller
1584 * @host: host specific structure
1585 * @relevant: port error bits relevant to this host controller
1586 * @hc: which host controller we're to look at
1587 *
1588 * Read then write clear the HC interrupt status then walk each
1589 * port connected to the HC and see if it needs servicing. Port
1590 * success ints are reported in the HC interrupt status reg, the
1591 * port error ints are reported in the higher level main
1592 * interrupt status register and thus are passed in via the
1593 * 'relevant' argument.
1594 *
1595 * LOCKING:
1596 * Inherited from caller.
1597 */
1598 static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc)
1599 {
1600 void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
1601 void __iomem *hc_mmio = mv_hc_base(mmio, hc);
1602 u32 hc_irq_cause;
1603 int port, port0;
1604
1605 if (hc == 0)
1606 port0 = 0;
1607 else
1608 port0 = MV_PORTS_PER_HC;
1609
1610 /* we'll need the HC success int register in most cases */
1611 hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
1612 if (!hc_irq_cause)
1613 return;
1614
1615 writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
1616
1617 VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n",
1618 hc, relevant, hc_irq_cause);
1619
1620 for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
1621 struct ata_port *ap = host->ports[port];
1622 struct mv_port_priv *pp = ap->private_data;
1623 int have_err_bits, hard_port, shift;
1624
1625 if ((!ap) || (ap->flags & ATA_FLAG_DISABLED))
1626 continue;
1627
1628 shift = port << 1; /* (port * 2) */
1629 if (port >= MV_PORTS_PER_HC) {
1630 shift++; /* skip bit 8 in the HC Main IRQ reg */
1631 }
1632 have_err_bits = ((PORT0_ERR << shift) & relevant);
1633
1634 if (unlikely(have_err_bits)) {
1635 struct ata_queued_cmd *qc;
1636
1637 qc = ata_qc_from_tag(ap, ap->link.active_tag);
1638 if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
1639 continue;
1640
1641 mv_err_intr(ap, qc);
1642 continue;
1643 }
1644
1645 hard_port = mv_hardport_from_port(port); /* range 0..3 */
1646
1647 if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
1648 if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause)
1649 mv_intr_edma(ap);
1650 } else {
1651 if ((DEV_IRQ << hard_port) & hc_irq_cause)
1652 mv_intr_pio(ap);
1653 }
1654 }
1655 VPRINTK("EXIT\n");
1656 }
1657
1658 static void mv_pci_error(struct ata_host *host, void __iomem *mmio)
1659 {
1660 struct mv_host_priv *hpriv = host->private_data;
1661 struct ata_port *ap;
1662 struct ata_queued_cmd *qc;
1663 struct ata_eh_info *ehi;
1664 unsigned int i, err_mask, printed = 0;
1665 u32 err_cause;
1666
1667 err_cause = readl(mmio + hpriv->irq_cause_ofs);
1668
1669 dev_printk(KERN_ERR, host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n",
1670 err_cause);
1671
1672 DPRINTK("All regs @ PCI error\n");
1673 mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
1674
1675 writelfl(0, mmio + hpriv->irq_cause_ofs);
1676
1677 for (i = 0; i < host->n_ports; i++) {
1678 ap = host->ports[i];
1679 if (!ata_link_offline(&ap->link)) {
1680 ehi = &ap->link.eh_info;
1681 ata_ehi_clear_desc(ehi);
1682 if (!printed++)
1683 ata_ehi_push_desc(ehi,
1684 "PCI err cause 0x%08x", err_cause);
1685 err_mask = AC_ERR_HOST_BUS;
1686 ehi->action = ATA_EH_HARDRESET;
1687 qc = ata_qc_from_tag(ap, ap->link.active_tag);
1688 if (qc)
1689 qc->err_mask |= err_mask;
1690 else
1691 ehi->err_mask |= err_mask;
1692
1693 ata_port_freeze(ap);
1694 }
1695 }
1696 }
1697
1698 /**
1699 * mv_interrupt - Main interrupt event handler
1700 * @irq: unused
1701 * @dev_instance: private data; in this case the host structure
1702 *
1703 * Read the read only register to determine if any host
1704 * controllers have pending interrupts. If so, call lower level
1705 * routine to handle. Also check for PCI errors which are only
1706 * reported here.
1707 *
1708 * LOCKING:
1709 * This routine holds the host lock while processing pending
1710 * interrupts.
1711 */
1712 static irqreturn_t mv_interrupt(int irq, void *dev_instance)
1713 {
1714 struct ata_host *host = dev_instance;
1715 unsigned int hc, handled = 0, n_hcs;
1716 void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
1717 u32 irq_stat;
1718
1719 irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
1720
1721 /* check the cases where we either have nothing pending or have read
1722 * a bogus register value which can indicate HW removal or PCI fault
1723 */
1724 if (!irq_stat || (0xffffffffU == irq_stat))
1725 return IRQ_NONE;
1726
1727 n_hcs = mv_get_hc_count(host->ports[0]->flags);
1728 spin_lock(&host->lock);
1729
1730 if (unlikely(irq_stat & PCI_ERR)) {
1731 mv_pci_error(host, mmio);
1732 handled = 1;
1733 goto out_unlock; /* skip all other HC irq handling */
1734 }
1735
1736 for (hc = 0; hc < n_hcs; hc++) {
1737 u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT));
1738 if (relevant) {
1739 mv_host_intr(host, relevant, hc);
1740 handled = 1;
1741 }
1742 }
1743
1744 out_unlock:
1745 spin_unlock(&host->lock);
1746
1747 return IRQ_RETVAL(handled);
1748 }
1749
1750 static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
1751 {
1752 void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
1753 unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
1754
1755 return hc_mmio + ofs;
1756 }
1757
1758 static unsigned int mv5_scr_offset(unsigned int sc_reg_in)
1759 {
1760 unsigned int ofs;
1761
1762 switch (sc_reg_in) {
1763 case SCR_STATUS:
1764 case SCR_ERROR:
1765 case SCR_CONTROL:
1766 ofs = sc_reg_in * sizeof(u32);
1767 break;
1768 default:
1769 ofs = 0xffffffffU;
1770 break;
1771 }
1772 return ofs;
1773 }
1774
1775 static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val)
1776 {
1777 void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
1778 void __iomem *addr = mv5_phy_base(mmio, ap->port_no);
1779 unsigned int ofs = mv5_scr_offset(sc_reg_in);
1780
1781 if (ofs != 0xffffffffU) {
1782 *val = readl(addr + ofs);
1783 return 0;
1784 } else
1785 return -EINVAL;
1786 }
1787
1788 static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
1789 {
1790 void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
1791 void __iomem *addr = mv5_phy_base(mmio, ap->port_no);
1792 unsigned int ofs = mv5_scr_offset(sc_reg_in);
1793
1794 if (ofs != 0xffffffffU) {
1795 writelfl(val, addr + ofs);
1796 return 0;
1797 } else
1798 return -EINVAL;
1799 }
1800
1801 static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio)
1802 {
1803 int early_5080;
1804
1805 early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0);
1806
1807 if (!early_5080) {
1808 u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
1809 tmp |= (1 << 0);
1810 writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
1811 }
1812
1813 mv_reset_pci_bus(pdev, mmio);
1814 }
1815
1816 static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
1817 {
1818 writel(0x0fcfffff, mmio + MV_FLASH_CTL);
1819 }
1820
1821 static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
1822 void __iomem *mmio)
1823 {
1824 void __iomem *phy_mmio = mv5_phy_base(mmio, idx);
1825 u32 tmp;
1826
1827 tmp = readl(phy_mmio + MV5_PHY_MODE);
1828
1829 hpriv->signal[idx].pre = tmp & 0x1800; /* bits 12:11 */
1830 hpriv->signal[idx].amps = tmp & 0xe0; /* bits 7:5 */
1831 }
1832
1833 static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
1834 {
1835 u32 tmp;
1836
1837 writel(0, mmio + MV_GPIO_PORT_CTL);
1838
1839 /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */
1840
1841 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
1842 tmp |= ~(1 << 0);
1843 writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
1844 }
1845
1846 static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
1847 unsigned int port)
1848 {
1849 void __iomem *phy_mmio = mv5_phy_base(mmio, port);
1850 const u32 mask = (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5);
1851 u32 tmp;
1852 int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0);
1853
1854 if (fix_apm_sq) {
1855 tmp = readl(phy_mmio + MV5_LT_MODE);
1856 tmp |= (1 << 19);
1857 writel(tmp, phy_mmio + MV5_LT_MODE);
1858
1859 tmp = readl(phy_mmio + MV5_PHY_CTL);
1860 tmp &= ~0x3;
1861 tmp |= 0x1;
1862 writel(tmp, phy_mmio + MV5_PHY_CTL);
1863 }
1864
1865 tmp = readl(phy_mmio + MV5_PHY_MODE);
1866 tmp &= ~mask;
1867 tmp |= hpriv->signal[port].pre;
1868 tmp |= hpriv->signal[port].amps;
1869 writel(tmp, phy_mmio + MV5_PHY_MODE);
1870 }
1871
1872
1873 #undef ZERO
1874 #define ZERO(reg) writel(0, port_mmio + (reg))
1875 static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio,
1876 unsigned int port)
1877 {
1878 void __iomem *port_mmio = mv_port_base(mmio, port);
1879
1880 writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
1881
1882 mv_channel_reset(hpriv, mmio, port);
1883
1884 ZERO(0x028); /* command */
1885 writel(0x11f, port_mmio + EDMA_CFG_OFS);
1886 ZERO(0x004); /* timer */
1887 ZERO(0x008); /* irq err cause */
1888 ZERO(0x00c); /* irq err mask */
1889 ZERO(0x010); /* rq bah */
1890 ZERO(0x014); /* rq inp */
1891 ZERO(0x018); /* rq outp */
1892 ZERO(0x01c); /* respq bah */
1893 ZERO(0x024); /* respq outp */
1894 ZERO(0x020); /* respq inp */
1895 ZERO(0x02c); /* test control */
1896 writel(0xbc, port_mmio + EDMA_IORDY_TMOUT);
1897 }
1898 #undef ZERO
1899
1900 #define ZERO(reg) writel(0, hc_mmio + (reg))
1901 static void mv5_reset_one_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
1902 unsigned int hc)
1903 {
1904 void __iomem *hc_mmio = mv_hc_base(mmio, hc);
1905 u32 tmp;
1906
1907 ZERO(0x00c);
1908 ZERO(0x010);
1909 ZERO(0x014);
1910 ZERO(0x018);
1911
1912 tmp = readl(hc_mmio + 0x20);
1913 tmp &= 0x1c1c1c1c;
1914 tmp |= 0x03030303;
1915 writel(tmp, hc_mmio + 0x20);
1916 }
1917 #undef ZERO
1918
1919 static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
1920 unsigned int n_hc)
1921 {
1922 unsigned int hc, port;
1923
1924 for (hc = 0; hc < n_hc; hc++) {
1925 for (port = 0; port < MV_PORTS_PER_HC; port++)
1926 mv5_reset_hc_port(hpriv, mmio,
1927 (hc * MV_PORTS_PER_HC) + port);
1928
1929 mv5_reset_one_hc(hpriv, mmio, hc);
1930 }
1931
1932 return 0;
1933 }
1934
1935 #undef ZERO
1936 #define ZERO(reg) writel(0, mmio + (reg))
1937 static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio)
1938 {
1939 struct ata_host *host = dev_get_drvdata(&pdev->dev);
1940 struct mv_host_priv *hpriv = host->private_data;
1941 u32 tmp;
1942
1943 tmp = readl(mmio + MV_PCI_MODE);
1944 tmp &= 0xff00ffff;
1945 writel(tmp, mmio + MV_PCI_MODE);
1946
1947 ZERO(MV_PCI_DISC_TIMER);
1948 ZERO(MV_PCI_MSI_TRIGGER);
1949 writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT);
1950 ZERO(HC_MAIN_IRQ_MASK_OFS);
1951 ZERO(MV_PCI_SERR_MASK);
1952 ZERO(hpriv->irq_cause_ofs);
1953 ZERO(hpriv->irq_mask_ofs);
1954 ZERO(MV_PCI_ERR_LOW_ADDRESS);
1955 ZERO(MV_PCI_ERR_HIGH_ADDRESS);
1956 ZERO(MV_PCI_ERR_ATTRIBUTE);
1957 ZERO(MV_PCI_ERR_COMMAND);
1958 }
1959 #undef ZERO
1960
1961 static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
1962 {
1963 u32 tmp;
1964
1965 mv5_reset_flash(hpriv, mmio);
1966
1967 tmp = readl(mmio + MV_GPIO_PORT_CTL);
1968 tmp &= 0x3;
1969 tmp |= (1 << 5) | (1 << 6);
1970 writel(tmp, mmio + MV_GPIO_PORT_CTL);
1971 }
1972
1973 /**
1974 * mv6_reset_hc - Perform the 6xxx global soft reset
1975 * @mmio: base address of the HBA
1976 *
1977 * This routine only applies to 6xxx parts.
1978 *
1979 * LOCKING:
1980 * Inherited from caller.
1981 */
1982 static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
1983 unsigned int n_hc)
1984 {
1985 void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS;
1986 int i, rc = 0;
1987 u32 t;
1988
1989 /* Following procedure defined in PCI "main command and status
1990 * register" table.
1991 */
1992 t = readl(reg);
1993 writel(t | STOP_PCI_MASTER, reg);
1994
1995 for (i = 0; i < 1000; i++) {
1996 udelay(1);
1997 t = readl(reg);
1998 if (PCI_MASTER_EMPTY & t)
1999 break;
2000 }
2001 if (!(PCI_MASTER_EMPTY & t)) {
2002 printk(KERN_ERR DRV_NAME ": PCI master won't flush\n");
2003 rc = 1;
2004 goto done;
2005 }
2006
2007 /* set reset */
2008 i = 5;
2009 do {
2010 writel(t | GLOB_SFT_RST, reg);
2011 t = readl(reg);
2012 udelay(1);
2013 } while (!(GLOB_SFT_RST & t) && (i-- > 0));
2014
2015 if (!(GLOB_SFT_RST & t)) {
2016 printk(KERN_ERR DRV_NAME ": can't set global reset\n");
2017 rc = 1;
2018 goto done;
2019 }
2020
2021 /* clear reset and *reenable the PCI master* (not mentioned in spec) */
2022 i = 5;
2023 do {
2024 writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg);
2025 t = readl(reg);
2026 udelay(1);
2027 } while ((GLOB_SFT_RST & t) && (i-- > 0));
2028
2029 if (GLOB_SFT_RST & t) {
2030 printk(KERN_ERR DRV_NAME ": can't clear global reset\n");
2031 rc = 1;
2032 }
2033 done:
2034 return rc;
2035 }
2036
2037 static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
2038 void __iomem *mmio)
2039 {
2040 void __iomem *port_mmio;
2041 u32 tmp;
2042
2043 tmp = readl(mmio + MV_RESET_CFG);
2044 if ((tmp & (1 << 0)) == 0) {
2045 hpriv->signal[idx].amps = 0x7 << 8;
2046 hpriv->signal[idx].pre = 0x1 << 5;
2047 return;
2048 }
2049
2050 port_mmio = mv_port_base(mmio, idx);
2051 tmp = readl(port_mmio + PHY_MODE2);
2052
2053 hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */
2054 hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */
2055 }
2056
2057 static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
2058 {
2059 writel(0x00000060, mmio + MV_GPIO_PORT_CTL);
2060 }
2061
2062 static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
2063 unsigned int port)
2064 {
2065 void __iomem *port_mmio = mv_port_base(mmio, port);
2066
2067 u32 hp_flags = hpriv->hp_flags;
2068 int fix_phy_mode2 =
2069 hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
2070 int fix_phy_mode4 =
2071 hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
2072 u32 m2, tmp;
2073
2074 if (fix_phy_mode2) {
2075 m2 = readl(port_mmio + PHY_MODE2);
2076 m2 &= ~(1 << 16);
2077 m2 |= (1 << 31);
2078 writel(m2, port_mmio + PHY_MODE2);
2079
2080 udelay(200);
2081
2082 m2 = readl(port_mmio + PHY_MODE2);
2083 m2 &= ~((1 << 16) | (1 << 31));
2084 writel(m2, port_mmio + PHY_MODE2);
2085
2086 udelay(200);
2087 }
2088
2089 /* who knows what this magic does */
2090 tmp = readl(port_mmio + PHY_MODE3);
2091 tmp &= ~0x7F800000;
2092 tmp |= 0x2A800000;
2093 writel(tmp, port_mmio + PHY_MODE3);
2094
2095 if (fix_phy_mode4) {
2096 u32 m4;
2097
2098 m4 = readl(port_mmio + PHY_MODE4);
2099
2100 if (hp_flags & MV_HP_ERRATA_60X1B2)
2101 tmp = readl(port_mmio + 0x310);
2102
2103 m4 = (m4 & ~(1 << 1)) | (1 << 0);
2104
2105 writel(m4, port_mmio + PHY_MODE4);
2106
2107 if (hp_flags & MV_HP_ERRATA_60X1B2)
2108 writel(tmp, port_mmio + 0x310);
2109 }
2110
2111 /* Revert values of pre-emphasis and signal amps to the saved ones */
2112 m2 = readl(port_mmio + PHY_MODE2);
2113
2114 m2 &= ~MV_M2_PREAMP_MASK;
2115 m2 |= hpriv->signal[port].amps;
2116 m2 |= hpriv->signal[port].pre;
2117 m2 &= ~(1 << 16);
2118
2119 /* according to mvSata 3.6.1, some IIE values are fixed */
2120 if (IS_GEN_IIE(hpriv)) {
2121 m2 &= ~0xC30FF01F;
2122 m2 |= 0x0000900F;
2123 }
2124
2125 writel(m2, port_mmio + PHY_MODE2);
2126 }
2127
2128 static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
2129 unsigned int port_no)
2130 {
2131 void __iomem *port_mmio = mv_port_base(mmio, port_no);
2132
2133 writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
2134
2135 if (IS_GEN_II(hpriv)) {
2136 u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
2137 ifctl |= (1 << 7); /* enable gen2i speed */
2138 ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
2139 writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
2140 }
2141
2142 udelay(25); /* allow reset propagation */
2143
2144 /* Spec never mentions clearing the bit. Marvell's driver does
2145 * clear the bit, however.
2146 */
2147 writelfl(0, port_mmio + EDMA_CMD_OFS);
2148
2149 hpriv->ops->phy_errata(hpriv, mmio, port_no);
2150
2151 if (IS_GEN_I(hpriv))
2152 mdelay(1);
2153 }
2154
2155 /**
2156 * mv_phy_reset - Perform eDMA reset followed by COMRESET
2157 * @ap: ATA channel to manipulate
2158 *
2159 * Part of this is taken from __sata_phy_reset and modified to
2160 * not sleep since this routine gets called from interrupt level.
2161 *
2162 * LOCKING:
2163 * Inherited from caller. This is coded to safe to call at
2164 * interrupt level, i.e. it does not sleep.
2165 */
2166 static void mv_phy_reset(struct ata_port *ap, unsigned int *class,
2167 unsigned long deadline)
2168 {
2169 struct mv_port_priv *pp = ap->private_data;
2170 struct mv_host_priv *hpriv = ap->host->private_data;
2171 void __iomem *port_mmio = mv_ap_base(ap);
2172 int retry = 5;
2173 u32 sstatus;
2174
2175 VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio);
2176
2177 #ifdef DEBUG
2178 {
2179 u32 sstatus, serror, scontrol;
2180
2181 mv_scr_read(ap, SCR_STATUS, &sstatus);
2182 mv_scr_read(ap, SCR_ERROR, &serror);
2183 mv_scr_read(ap, SCR_CONTROL, &scontrol);
2184 DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
2185 "SCtrl 0x%08x\n", sstatus, serror, scontrol);
2186 }
2187 #endif
2188
2189 /* Issue COMRESET via SControl */
2190 comreset_retry:
2191 sata_scr_write_flush(&ap->link, SCR_CONTROL, 0x301);
2192 msleep(1);
2193
2194 sata_scr_write_flush(&ap->link, SCR_CONTROL, 0x300);
2195 msleep(20);
2196
2197 do {
2198 sata_scr_read(&ap->link, SCR_STATUS, &sstatus);
2199 if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0))
2200 break;
2201
2202 msleep(1);
2203 } while (time_before(jiffies, deadline));
2204
2205 /* work around errata */
2206 if (IS_GEN_II(hpriv) &&
2207 (sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) &&
2208 (retry-- > 0))
2209 goto comreset_retry;
2210
2211 #ifdef DEBUG
2212 {
2213 u32 sstatus, serror, scontrol;
2214
2215 mv_scr_read(ap, SCR_STATUS, &sstatus);
2216 mv_scr_read(ap, SCR_ERROR, &serror);
2217 mv_scr_read(ap, SCR_CONTROL, &scontrol);
2218 DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x "
2219 "SCtrl 0x%08x\n", sstatus, serror, scontrol);
2220 }
2221 #endif
2222
2223 if (ata_link_offline(&ap->link)) {
2224 *class = ATA_DEV_NONE;
2225 return;
2226 }
2227
2228 /* even after SStatus reflects that device is ready,
2229 * it seems to take a while for link to be fully
2230 * established (and thus Status no longer 0x80/0x7F),
2231 * so we poll a bit for that, here.
2232 */
2233 retry = 20;
2234 while (1) {
2235 u8 drv_stat = ata_check_status(ap);
2236 if ((drv_stat != 0x80) && (drv_stat != 0x7f))
2237 break;
2238 msleep(500);
2239 if (retry-- <= 0)
2240 break;
2241 if (time_after(jiffies, deadline))
2242 break;
2243 }
2244
2245 /* FIXME: if we passed the deadline, the following
2246 * code probably produces an invalid result
2247 */
2248
2249 /* finally, read device signature from TF registers */
2250 *class = ata_dev_try_classify(ap->link.device, 1, NULL);
2251
2252 writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
2253
2254 WARN_ON(pp->pp_flags & MV_PP_FLAG_EDMA_EN);
2255
2256 VPRINTK("EXIT\n");
2257 }
2258
2259 static int mv_prereset(struct ata_link *link, unsigned long deadline)
2260 {
2261 struct ata_port *ap = link->ap;
2262 struct mv_port_priv *pp = ap->private_data;
2263 struct ata_eh_context *ehc = &link->eh_context;
2264 int rc;
2265
2266 rc = mv_stop_dma(ap);
2267 if (rc)
2268 ehc->i.action |= ATA_EH_HARDRESET;
2269
2270 if (!(pp->pp_flags & MV_PP_FLAG_HAD_A_RESET)) {
2271 pp->pp_flags |= MV_PP_FLAG_HAD_A_RESET;
2272 ehc->i.action |= ATA_EH_HARDRESET;
2273 }
2274
2275 /* if we're about to do hardreset, nothing more to do */
2276 if (ehc->i.action & ATA_EH_HARDRESET)
2277 return 0;
2278
2279 if (ata_link_online(link))
2280 rc = ata_wait_ready(ap, deadline);
2281 else
2282 rc = -ENODEV;
2283
2284 return rc;
2285 }
2286
2287 static int mv_hardreset(struct ata_link *link, unsigned int *class,
2288 unsigned long deadline)
2289 {
2290 struct ata_port *ap = link->ap;
2291 struct mv_host_priv *hpriv = ap->host->private_data;
2292 void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
2293
2294 mv_stop_dma(ap);
2295
2296 mv_channel_reset(hpriv, mmio, ap->port_no);
2297
2298 mv_phy_reset(ap, class, deadline);
2299
2300 return 0;
2301 }
2302
2303 static void mv_postreset(struct ata_link *link, unsigned int *classes)
2304 {
2305 struct ata_port *ap = link->ap;
2306 u32 serr;
2307
2308 /* print link status */
2309 sata_print_link_status(link);
2310
2311 /* clear SError */
2312 sata_scr_read(link, SCR_ERROR, &serr);
2313 sata_scr_write_flush(link, SCR_ERROR, serr);
2314
2315 /* bail out if no device is present */
2316 if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
2317 DPRINTK("EXIT, no device\n");
2318 return;
2319 }
2320
2321 /* set up device control */
2322 iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
2323 }
2324
2325 static void mv_error_handler(struct ata_port *ap)
2326 {
2327 ata_do_eh(ap, mv_prereset, ata_std_softreset,
2328 mv_hardreset, mv_postreset);
2329 }
2330
2331 static void mv_post_int_cmd(struct ata_queued_cmd *qc)
2332 {
2333 mv_stop_dma(qc->ap);
2334 }
2335
2336 static void mv_eh_freeze(struct ata_port *ap)
2337 {
2338 void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
2339 unsigned int hc = (ap->port_no > 3) ? 1 : 0;
2340 u32 tmp, mask;
2341 unsigned int shift;
2342
2343 /* FIXME: handle coalescing completion events properly */
2344
2345 shift = ap->port_no * 2;
2346 if (hc > 0)
2347 shift++;
2348
2349 mask = 0x3 << shift;
2350
2351 /* disable assertion of portN err, done events */
2352 tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS);
2353 writelfl(tmp & ~mask, mmio + HC_MAIN_IRQ_MASK_OFS);
2354 }
2355
2356 static void mv_eh_thaw(struct ata_port *ap)
2357 {
2358 void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
2359 unsigned int hc = (ap->port_no > 3) ? 1 : 0;
2360 void __iomem *hc_mmio = mv_hc_base(mmio, hc);
2361 void __iomem *port_mmio = mv_ap_base(ap);
2362 u32 tmp, mask, hc_irq_cause;
2363 unsigned int shift, hc_port_no = ap->port_no;
2364
2365 /* FIXME: handle coalescing completion events properly */
2366
2367 shift = ap->port_no * 2;
2368 if (hc > 0) {
2369 shift++;
2370 hc_port_no -= 4;
2371 }
2372
2373 mask = 0x3 << shift;
2374
2375 /* clear EDMA errors on this port */
2376 writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
2377
2378 /* clear pending irq events */
2379 hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
2380 hc_irq_cause &= ~(1 << hc_port_no); /* clear CRPB-done */
2381 hc_irq_cause &= ~(1 << (hc_port_no + 8)); /* clear Device int */
2382 writel(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
2383
2384 /* enable assertion of portN err, done events */
2385 tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS);
2386 writelfl(tmp | mask, mmio + HC_MAIN_IRQ_MASK_OFS);
2387 }
2388
2389 /**
2390 * mv_port_init - Perform some early initialization on a single port.
2391 * @port: libata data structure storing shadow register addresses
2392 * @port_mmio: base address of the port
2393 *
2394 * Initialize shadow register mmio addresses, clear outstanding
2395 * interrupts on the port, and unmask interrupts for the future
2396 * start of the port.
2397 *
2398 * LOCKING:
2399 * Inherited from caller.
2400 */
2401 static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
2402 {
2403 void __iomem *shd_base = port_mmio + SHD_BLK_OFS;
2404 unsigned serr_ofs;
2405
2406 /* PIO related setup
2407 */
2408 port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA);
2409 port->error_addr =
2410 port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR);
2411 port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT);
2412 port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL);
2413 port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM);
2414 port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH);
2415 port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE);
2416 port->status_addr =
2417 port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS);
2418 /* special case: control/altstatus doesn't have ATA_REG_ address */
2419 port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS;
2420
2421 /* unused: */
2422 port->cmd_addr = port->bmdma_addr = port->scr_addr = NULL;
2423
2424 /* Clear any currently outstanding port interrupt conditions */
2425 serr_ofs = mv_scr_offset(SCR_ERROR);
2426 writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs);
2427 writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
2428
2429 /* unmask all EDMA error interrupts */
2430 writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
2431
2432 VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
2433 readl(port_mmio + EDMA_CFG_OFS),
2434 readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS),
2435 readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
2436 }
2437
2438 static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
2439 {
2440 struct pci_dev *pdev = to_pci_dev(host->dev);
2441 struct mv_host_priv *hpriv = host->private_data;
2442 u32 hp_flags = hpriv->hp_flags;
2443
2444 switch (board_idx) {
2445 case chip_5080:
2446 hpriv->ops = &mv5xxx_ops;
2447 hp_flags |= MV_HP_GEN_I;
2448
2449 switch (pdev->revision) {
2450 case 0x1:
2451 hp_flags |= MV_HP_ERRATA_50XXB0;
2452 break;
2453 case 0x3:
2454 hp_flags |= MV_HP_ERRATA_50XXB2;
2455 break;
2456 default:
2457 dev_printk(KERN_WARNING, &pdev->dev,
2458 "Applying 50XXB2 workarounds to unknown rev\n");
2459 hp_flags |= MV_HP_ERRATA_50XXB2;
2460 break;
2461 }
2462 break;
2463
2464 case chip_504x:
2465 case chip_508x:
2466 hpriv->ops = &mv5xxx_ops;
2467 hp_flags |= MV_HP_GEN_I;
2468
2469 switch (pdev->revision) {
2470 case 0x0:
2471 hp_flags |= MV_HP_ERRATA_50XXB0;
2472 break;
2473 case 0x3:
2474 hp_flags |= MV_HP_ERRATA_50XXB2;
2475 break;
2476 default:
2477 dev_printk(KERN_WARNING, &pdev->dev,
2478 "Applying B2 workarounds to unknown rev\n");
2479 hp_flags |= MV_HP_ERRATA_50XXB2;
2480 break;
2481 }
2482 break;
2483
2484 case chip_604x:
2485 case chip_608x:
2486 hpriv->ops = &mv6xxx_ops;
2487 hp_flags |= MV_HP_GEN_II;
2488
2489 switch (pdev->revision) {
2490 case 0x7:
2491 hp_flags |= MV_HP_ERRATA_60X1B2;
2492 break;
2493 case 0x9:
2494 hp_flags |= MV_HP_ERRATA_60X1C0;
2495 break;
2496 default:
2497 dev_printk(KERN_WARNING, &pdev->dev,
2498 "Applying B2 workarounds to unknown rev\n");
2499 hp_flags |= MV_HP_ERRATA_60X1B2;
2500 break;
2501 }
2502 break;
2503
2504 case chip_7042:
2505 hp_flags |= MV_HP_PCIE;
2506 if (pdev->vendor == PCI_VENDOR_ID_TTI &&
2507 (pdev->device == 0x2300 || pdev->device == 0x2310))
2508 {
2509 /*
2510 * Highpoint RocketRAID PCIe 23xx series cards:
2511 *
2512 * Unconfigured drives are treated as "Legacy"
2513 * by the BIOS, and it overwrites sector 8 with
2514 * a "Lgcy" metadata block prior to Linux boot.
2515 *
2516 * Configured drives (RAID or JBOD) leave sector 8
2517 * alone, but instead overwrite a high numbered
2518 * sector for the RAID metadata. This sector can
2519 * be determined exactly, by truncating the physical
2520 * drive capacity to a nice even GB value.
2521 *
2522 * RAID metadata is at: (dev->n_sectors & ~0xfffff)
2523 *
2524 * Warn the user, lest they think we're just buggy.
2525 */
2526 printk(KERN_WARNING DRV_NAME ": Highpoint RocketRAID"
2527 " BIOS CORRUPTS DATA on all attached drives,"
2528 " regardless of if/how they are configured."
2529 " BEWARE!\n");
2530 printk(KERN_WARNING DRV_NAME ": For data safety, do not"
2531 " use sectors 8-9 on \"Legacy\" drives,"
2532 " and avoid the final two gigabytes on"
2533 " all RocketRAID BIOS initialized drives.\n");
2534 }
2535 case chip_6042:
2536 hpriv->ops = &mv6xxx_ops;
2537 hp_flags |= MV_HP_GEN_IIE;
2538
2539 switch (pdev->revision) {
2540 case 0x0:
2541 hp_flags |= MV_HP_ERRATA_XX42A0;
2542 break;
2543 case 0x1:
2544 hp_flags |= MV_HP_ERRATA_60X1C0;
2545 break;
2546 default:
2547 dev_printk(KERN_WARNING, &pdev->dev,
2548 "Applying 60X1C0 workarounds to unknown rev\n");
2549 hp_flags |= MV_HP_ERRATA_60X1C0;
2550 break;
2551 }
2552 break;
2553
2554 default:
2555 dev_printk(KERN_ERR, &pdev->dev,
2556 "BUG: invalid board index %u\n", board_idx);
2557 return 1;
2558 }
2559
2560 hpriv->hp_flags = hp_flags;
2561 if (hp_flags & MV_HP_PCIE) {
2562 hpriv->irq_cause_ofs = PCIE_IRQ_CAUSE_OFS;
2563 hpriv->irq_mask_ofs = PCIE_IRQ_MASK_OFS;
2564 hpriv->unmask_all_irqs = PCIE_UNMASK_ALL_IRQS;
2565 } else {
2566 hpriv->irq_cause_ofs = PCI_IRQ_CAUSE_OFS;
2567 hpriv->irq_mask_ofs = PCI_IRQ_MASK_OFS;
2568 hpriv->unmask_all_irqs = PCI_UNMASK_ALL_IRQS;
2569 }
2570
2571 return 0;
2572 }
2573
2574 /**
2575 * mv_init_host - Perform some early initialization of the host.
2576 * @host: ATA host to initialize
2577 * @board_idx: controller index
2578 *
2579 * If possible, do an early global reset of the host. Then do
2580 * our port init and clear/unmask all/relevant host interrupts.
2581 *
2582 * LOCKING:
2583 * Inherited from caller.
2584 */
2585 static int mv_init_host(struct ata_host *host, unsigned int board_idx)
2586 {
2587 int rc = 0, n_hc, port, hc;
2588 struct pci_dev *pdev = to_pci_dev(host->dev);
2589 void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
2590 struct mv_host_priv *hpriv = host->private_data;
2591
2592 /* global interrupt mask */
2593 writel(0, mmio + HC_MAIN_IRQ_MASK_OFS);
2594
2595 rc = mv_chip_id(host, board_idx);
2596 if (rc)
2597 goto done;
2598
2599 n_hc = mv_get_hc_count(host->ports[0]->flags);
2600
2601 for (port = 0; port < host->n_ports; port++)
2602 hpriv->ops->read_preamp(hpriv, port, mmio);
2603
2604 rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
2605 if (rc)
2606 goto done;
2607
2608 hpriv->ops->reset_flash(hpriv, mmio);
2609 hpriv->ops->reset_bus(pdev, mmio);
2610 hpriv->ops->enable_leds(hpriv, mmio);
2611
2612 for (port = 0; port < host->n_ports; port++) {
2613 if (IS_GEN_II(hpriv)) {
2614 void __iomem *port_mmio = mv_port_base(mmio, port);
2615
2616 u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
2617 ifctl |= (1 << 7); /* enable gen2i speed */
2618 ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
2619 writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
2620 }
2621
2622 hpriv->ops->phy_errata(hpriv, mmio, port);
2623 }
2624
2625 for (port = 0; port < host->n_ports; port++) {
2626 struct ata_port *ap = host->ports[port];
2627 void __iomem *port_mmio = mv_port_base(mmio, port);
2628 unsigned int offset = port_mmio - mmio;
2629
2630 mv_port_init(&ap->ioaddr, port_mmio);
2631
2632 ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
2633 ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
2634 }
2635
2636 for (hc = 0; hc < n_hc; hc++) {
2637 void __iomem *hc_mmio = mv_hc_base(mmio, hc);
2638
2639 VPRINTK("HC%i: HC config=0x%08x HC IRQ cause "
2640 "(before clear)=0x%08x\n", hc,
2641 readl(hc_mmio + HC_CFG_OFS),
2642 readl(hc_mmio + HC_IRQ_CAUSE_OFS));
2643
2644 /* Clear any currently outstanding hc interrupt conditions */
2645 writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
2646 }
2647
2648 /* Clear any currently outstanding host interrupt conditions */
2649 writelfl(0, mmio + hpriv->irq_cause_ofs);
2650
2651 /* and unmask interrupt generation for host regs */
2652 writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
2653
2654 if (IS_GEN_I(hpriv))
2655 writelfl(~HC_MAIN_MASKED_IRQS_5, mmio + HC_MAIN_IRQ_MASK_OFS);
2656 else
2657 writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
2658
2659 VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
2660 "PCI int cause/mask=0x%08x/0x%08x\n",
2661 readl(mmio + HC_MAIN_IRQ_CAUSE_OFS),
2662 readl(mmio + HC_MAIN_IRQ_MASK_OFS),
2663 readl(mmio + hpriv->irq_cause_ofs),
2664 readl(mmio + hpriv->irq_mask_ofs));
2665
2666 done:
2667 return rc;
2668 }
2669
2670 /**
2671 * mv_print_info - Dump key info to kernel log for perusal.
2672 * @host: ATA host to print info about
2673 *
2674 * FIXME: complete this.
2675 *
2676 * LOCKING:
2677 * Inherited from caller.
2678 */
2679 static void mv_print_info(struct ata_host *host)
2680 {
2681 struct pci_dev *pdev = to_pci_dev(host->dev);
2682 struct mv_host_priv *hpriv = host->private_data;
2683 u8 scc;
2684 const char *scc_s, *gen;
2685
2686 /* Use this to determine the HW stepping of the chip so we know
2687 * what errata to workaround
2688 */
2689 pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
2690 if (scc == 0)
2691 scc_s = "SCSI";
2692 else if (scc == 0x01)
2693 scc_s = "RAID";
2694 else
2695 scc_s = "?";
2696
2697 if (IS_GEN_I(hpriv))
2698 gen = "I";
2699 else if (IS_GEN_II(hpriv))
2700 gen = "II";
2701 else if (IS_GEN_IIE(hpriv))
2702 gen = "IIE";
2703 else
2704 gen = "?";
2705
2706 dev_printk(KERN_INFO, &pdev->dev,
2707 "Gen-%s %u slots %u ports %s mode IRQ via %s\n",
2708 gen, (unsigned)MV_MAX_Q_DEPTH, host->n_ports,
2709 scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
2710 }
2711
2712 /**
2713 * mv_init_one - handle a positive probe of a Marvell host
2714 * @pdev: PCI device found
2715 * @ent: PCI device ID entry for the matched host
2716 *
2717 * LOCKING:
2718 * Inherited from caller.
2719 */
2720 static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
2721 {
2722 static int printed_version;
2723 unsigned int board_idx = (unsigned int)ent->driver_data;
2724 const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL };
2725 struct ata_host *host;
2726 struct mv_host_priv *hpriv;
2727 int n_ports, rc;
2728
2729 if (!printed_version++)
2730 dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
2731
2732 /* allocate host */
2733 n_ports = mv_get_hc_count(ppi[0]->flags) * MV_PORTS_PER_HC;
2734
2735 host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
2736 hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
2737 if (!host || !hpriv)
2738 return -ENOMEM;
2739 host->private_data = hpriv;
2740
2741 /* acquire resources */
2742 rc = pcim_enable_device(pdev);
2743 if (rc)
2744 return rc;
2745
2746 rc = pcim_iomap_regions(pdev, 1 << MV_PRIMARY_BAR, DRV_NAME);
2747 if (rc == -EBUSY)
2748 pcim_pin_device(pdev);
2749 if (rc)
2750 return rc;
2751 host->iomap = pcim_iomap_table(pdev);
2752
2753 rc = pci_go_64(pdev);
2754 if (rc)
2755 return rc;
2756
2757 /* initialize adapter */
2758 rc = mv_init_host(host, board_idx);
2759 if (rc)
2760 return rc;
2761
2762 /* Enable interrupts */
2763 if (msi && pci_enable_msi(pdev))
2764 pci_intx(pdev, 1);
2765
2766 mv_dump_pci_cfg(pdev, 0x68);
2767 mv_print_info(host);
2768
2769 pci_set_master(pdev);
2770 pci_try_set_mwi(pdev);
2771 return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
2772 IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht);
2773 }
2774
2775 static int __init mv_init(void)
2776 {
2777 return pci_register_driver(&mv_pci_driver);
2778 }
2779
2780 static void __exit mv_exit(void)
2781 {
2782 pci_unregister_driver(&mv_pci_driver);
2783 }
2784
2785 MODULE_AUTHOR("Brett Russ");
2786 MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers");
2787 MODULE_LICENSE("GPL");
2788 MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
2789 MODULE_VERSION(DRV_VERSION);
2790
2791 module_param(msi, int, 0444);
2792 MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
2793
2794 module_init(mv_init);
2795 module_exit(mv_exit);
Verdex Pro support