drivers/ata/sata_vsc.c

   1 /*
   2  *  sata_vsc.c - Vitesse VSC7174 4 port DPA SATA
   3  *
   4  *  Maintained by:  Jeremy Higdon @ SGI
   5  *                  Please ALWAYS copy linux-ide@vger.kernel.org
   6  *                  on emails.
   7  *
   8  *  Copyright 2004 SGI
   9  *
  10  *  Bits from Jeff Garzik, Copyright RedHat, Inc.
  11  *
  12  *
  13  *  This program is free software; you can redistribute it and/or modify
  14  *  it under the terms of the GNU General Public License as published by
  15  *  the Free Software Foundation; either version 2, or (at your option)
  16  *  any later version.
  17  *
  18  *  This program is distributed in the hope that it will be useful,
  19  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *  GNU General Public License for more details.
  22  *
  23  *  You should have received a copy of the GNU General Public License
  24  *  along with this program; see the file COPYING.  If not, write to
  25  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  26  *
  27  *
  28  *  libata documentation is available via 'make {ps|pdf}docs',
  29  *  as Documentation/DocBook/libata.*
  30  *
  31  *  Vitesse hardware documentation presumably available under NDA.
  32  *  Intel 31244 (same hardware interface) documentation presumably
  33  *  available from http://developer.intel.com/
  34  *
  35  */
  36
  37 #include <linux/kernel.h>
  38 #include <linux/module.h>
  39 #include <linux/pci.h>
  40 #include <linux/init.h>
  41 #include <linux/blkdev.h>
  42 #include <linux/delay.h>
  43 #include <linux/interrupt.h>
  44 #include <linux/dma-mapping.h>
  45 #include <linux/device.h>
  46 #include <scsi/scsi_host.h>
  47 #include <linux/libata.h>
  48
  49 #define DRV_NAME        "sata_vsc"
  50 #define DRV_VERSION     "2.3"
  51
  52 enum {
  53         VSC_MMIO_BAR                    = 0,
  54
  55         /* Interrupt register offsets (from chip base address) */
  56         VSC_SATA_INT_STAT_OFFSET        = 0x00,
  57         VSC_SATA_INT_MASK_OFFSET        = 0x04,
  58
  59         /* Taskfile registers offsets */
  60         VSC_SATA_TF_CMD_OFFSET          = 0x00,
  61         VSC_SATA_TF_DATA_OFFSET         = 0x00,
  62         VSC_SATA_TF_ERROR_OFFSET        = 0x04,
  63         VSC_SATA_TF_FEATURE_OFFSET      = 0x06,
  64         VSC_SATA_TF_NSECT_OFFSET        = 0x08,
  65         VSC_SATA_TF_LBAL_OFFSET         = 0x0c,
  66         VSC_SATA_TF_LBAM_OFFSET         = 0x10,
  67         VSC_SATA_TF_LBAH_OFFSET         = 0x14,
  68         VSC_SATA_TF_DEVICE_OFFSET       = 0x18,
  69         VSC_SATA_TF_STATUS_OFFSET       = 0x1c,
  70         VSC_SATA_TF_COMMAND_OFFSET      = 0x1d,
  71         VSC_SATA_TF_ALTSTATUS_OFFSET    = 0x28,
  72         VSC_SATA_TF_CTL_OFFSET          = 0x29,
  73
  74         /* DMA base */
  75         VSC_SATA_UP_DESCRIPTOR_OFFSET   = 0x64,
  76         VSC_SATA_UP_DATA_BUFFER_OFFSET  = 0x6C,
  77         VSC_SATA_DMA_CMD_OFFSET         = 0x70,
  78
  79         /* SCRs base */
  80         VSC_SATA_SCR_STATUS_OFFSET      = 0x100,
  81         VSC_SATA_SCR_ERROR_OFFSET       = 0x104,
  82         VSC_SATA_SCR_CONTROL_OFFSET     = 0x108,
  83
  84         /* Port stride */
  85         VSC_SATA_PORT_OFFSET            = 0x200,
  86
  87         /* Error interrupt status bit offsets */
  88         VSC_SATA_INT_ERROR_CRC          = 0x40,
  89         VSC_SATA_INT_ERROR_T            = 0x20,
  90         VSC_SATA_INT_ERROR_P            = 0x10,
  91         VSC_SATA_INT_ERROR_R            = 0x8,
  92         VSC_SATA_INT_ERROR_E            = 0x4,
  93         VSC_SATA_INT_ERROR_M            = 0x2,
  94         VSC_SATA_INT_PHY_CHANGE         = 0x1,
  95         VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC  | VSC_SATA_INT_ERROR_T | \
  96                               VSC_SATA_INT_ERROR_P    | VSC_SATA_INT_ERROR_R | \
  97                               VSC_SATA_INT_ERROR_E    | VSC_SATA_INT_ERROR_M | \
  98                               VSC_SATA_INT_PHY_CHANGE),
  99 };
 100
 101 static int vsc_sata_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
 102 {
 103         if (sc_reg > SCR_CONTROL)
 104                 return -EINVAL;
 105         *val = readl(ap->ioaddr.scr_addr + (sc_reg * 4));
 106         return 0;
 107 }
 108
 109
 110 static int vsc_sata_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
 111 {
 112         if (sc_reg > SCR_CONTROL)
 113                 return -EINVAL;
 114         writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
 115         return 0;
 116 }
 117
 118
 119 static void vsc_freeze(struct ata_port *ap)
 120 {
 121         void __iomem *mask_addr;
 122
 123         mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
 124                 VSC_SATA_INT_MASK_OFFSET + ap->port_no;
 125
 126         writeb(0, mask_addr);
 127 }
 128
 129
 130 static void vsc_thaw(struct ata_port *ap)
 131 {
 132         void __iomem *mask_addr;
 133
 134         mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
 135                 VSC_SATA_INT_MASK_OFFSET + ap->port_no;
 136
 137         writeb(0xff, mask_addr);
 138 }
 139
 140
 141 static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
 142 {
 143         void __iomem *mask_addr;
 144         u8 mask;
 145
 146         mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
 147                 VSC_SATA_INT_MASK_OFFSET + ap->port_no;
 148         mask = readb(mask_addr);
 149         if (ctl & ATA_NIEN)
 150                 mask |= 0x80;
 151         else
 152                 mask &= 0x7F;
 153         writeb(mask, mask_addr);
 154 }
 155
 156
 157 static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 158 {
 159         struct ata_ioports *ioaddr = &ap->ioaddr;
 160         unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
 161
 162         /*
 163          * The only thing the ctl register is used for is SRST.
 164          * That is not enabled or disabled via tf_load.
 165          * However, if ATA_NIEN is changed, then we need to change
 166          * the interrupt register.
 167          */
 168         if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
 169                 ap->last_ctl = tf->ctl;
 170                 vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
 171         }
 172         if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
 173                 writew(tf->feature | (((u16)tf->hob_feature) << 8),
 174                        ioaddr->feature_addr);
 175                 writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
 176                        ioaddr->nsect_addr);
 177                 writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
 178                        ioaddr->lbal_addr);
 179                 writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
 180                        ioaddr->lbam_addr);
 181                 writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
 182                        ioaddr->lbah_addr);
 183         } else if (is_addr) {
 184                 writew(tf->feature, ioaddr->feature_addr);
 185                 writew(tf->nsect, ioaddr->nsect_addr);
 186                 writew(tf->lbal, ioaddr->lbal_addr);
 187                 writew(tf->lbam, ioaddr->lbam_addr);
 188                 writew(tf->lbah, ioaddr->lbah_addr);
 189         }
 190
 191         if (tf->flags & ATA_TFLAG_DEVICE)
 192                 writeb(tf->device, ioaddr->device_addr);
 193
 194         ata_wait_idle(ap);
 195 }
 196
 197
 198 static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 199 {
 200         struct ata_ioports *ioaddr = &ap->ioaddr;
 201         u16 nsect, lbal, lbam, lbah, feature;
 202
 203         tf->command = ata_check_status(ap);
 204         tf->device = readw(ioaddr->device_addr);
 205         feature = readw(ioaddr->error_addr);
 206         nsect = readw(ioaddr->nsect_addr);
 207         lbal = readw(ioaddr->lbal_addr);
 208         lbam = readw(ioaddr->lbam_addr);
 209         lbah = readw(ioaddr->lbah_addr);
 210
 211         tf->feature = feature;
 212         tf->nsect = nsect;
 213         tf->lbal = lbal;
 214         tf->lbam = lbam;
 215         tf->lbah = lbah;
 216
 217         if (tf->flags & ATA_TFLAG_LBA48) {
 218                 tf->hob_feature = feature >> 8;
 219                 tf->hob_nsect = nsect >> 8;
 220                 tf->hob_lbal = lbal >> 8;
 221                 tf->hob_lbam = lbam >> 8;
 222                 tf->hob_lbah = lbah >> 8;
 223         }
 224 }
 225
 226 static inline void vsc_error_intr(u8 port_status, struct ata_port *ap)
 227 {
 228         if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M))
 229                 ata_port_freeze(ap);
 230         else
 231                 ata_port_abort(ap);
 232 }
 233
 234 static void vsc_port_intr(u8 port_status, struct ata_port *ap)
 235 {
 236         struct ata_queued_cmd *qc;
 237         int handled = 0;
 238
 239         if (unlikely(port_status & VSC_SATA_INT_ERROR)) {
 240                 vsc_error_intr(port_status, ap);
 241                 return;
 242         }
 243
 244         qc = ata_qc_from_tag(ap, ap->link.active_tag);
 245         if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
 246                 handled = ata_host_intr(ap, qc);
 247
 248         /* We received an interrupt during a polled command,
 249          * or some other spurious condition.  Interrupt reporting
 250          * with this hardware is fairly reliable so it is safe to
 251          * simply clear the interrupt
 252          */
 253         if (unlikely(!handled))
 254                 ata_chk_status(ap);
 255 }
 256
 257 /*
 258  * vsc_sata_interrupt
 259  *
 260  * Read the interrupt register and process for the devices that have
 261  * them pending.
 262  */
 263 static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance)
 264 {
 265         struct ata_host *host = dev_instance;
 266         unsigned int i;
 267         unsigned int handled = 0;
 268         u32 status;
 269
 270         status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET);
 271
 272         if (unlikely(status == 0xffffffff || status == 0)) {
 273                 if (status)
 274                         dev_printk(KERN_ERR, host->dev,
 275                                 ": IRQ status == 0xffffffff, "
 276                                 "PCI fault or device removal?\n");
 277                 goto out;
 278         }
 279
 280         spin_lock(&host->lock);
 281
 282         for (i = 0; i < host->n_ports; i++) {
 283                 u8 port_status = (status >> (8 * i)) & 0xff;
 284                 if (port_status) {
 285                         struct ata_port *ap = host->ports[i];
 286
 287                         if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
 288                                 vsc_port_intr(port_status, ap);
 289                                 handled++;
 290                         } else
 291                                 dev_printk(KERN_ERR, host->dev,
 292                                         "interrupt from disabled port %d\n", i);
 293                 }
 294         }
 295
 296         spin_unlock(&host->lock);
 297 out:
 298         return IRQ_RETVAL(handled);
 299 }
 300
 301
 302 static struct scsi_host_template vsc_sata_sht = {
 303         .module                 = THIS_MODULE,
 304         .name                   = DRV_NAME,
 305         .ioctl                  = ata_scsi_ioctl,
 306         .queuecommand           = ata_scsi_queuecmd,
 307         .can_queue              = ATA_DEF_QUEUE,
 308         .this_id                = ATA_SHT_THIS_ID,
 309         .sg_tablesize           = LIBATA_MAX_PRD,
 310         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
 311         .emulated               = ATA_SHT_EMULATED,
 312         .use_clustering         = ATA_SHT_USE_CLUSTERING,
 313         .proc_name              = DRV_NAME,
 314         .dma_boundary           = ATA_DMA_BOUNDARY,
 315         .slave_configure        = ata_scsi_slave_config,
 316         .slave_destroy          = ata_scsi_slave_destroy,
 317         .bios_param             = ata_std_bios_param,
 318 };
 319
 320
 321 static const struct ata_port_operations vsc_sata_ops = {
 322         .tf_load                = vsc_sata_tf_load,
 323         .tf_read                = vsc_sata_tf_read,
 324         .exec_command           = ata_exec_command,
 325         .check_status           = ata_check_status,
 326         .dev_select             = ata_std_dev_select,
 327         .bmdma_setup            = ata_bmdma_setup,
 328         .bmdma_start            = ata_bmdma_start,
 329         .bmdma_stop             = ata_bmdma_stop,
 330         .bmdma_status           = ata_bmdma_status,
 331         .qc_prep                = ata_qc_prep,
 332         .qc_issue               = ata_qc_issue_prot,
 333         .data_xfer              = ata_data_xfer,
 334         .freeze                 = vsc_freeze,
 335         .thaw                   = vsc_thaw,
 336         .error_handler          = ata_bmdma_error_handler,
 337         .post_internal_cmd      = ata_bmdma_post_internal_cmd,
 338         .irq_clear              = ata_bmdma_irq_clear,
 339         .irq_on                 = ata_irq_on,
 340         .scr_read               = vsc_sata_scr_read,
 341         .scr_write              = vsc_sata_scr_write,
 342         .port_start             = ata_port_start,
 343 };
 344
 345 static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
 346                                           void __iomem *base)
 347 {
 348         port->cmd_addr          = base + VSC_SATA_TF_CMD_OFFSET;
 349         port->data_addr         = base + VSC_SATA_TF_DATA_OFFSET;
 350         port->error_addr        = base + VSC_SATA_TF_ERROR_OFFSET;
 351         port->feature_addr      = base + VSC_SATA_TF_FEATURE_OFFSET;
 352         port->nsect_addr        = base + VSC_SATA_TF_NSECT_OFFSET;
 353         port->lbal_addr         = base + VSC_SATA_TF_LBAL_OFFSET;
 354         port->lbam_addr         = base + VSC_SATA_TF_LBAM_OFFSET;
 355         port->lbah_addr         = base + VSC_SATA_TF_LBAH_OFFSET;
 356         port->device_addr       = base + VSC_SATA_TF_DEVICE_OFFSET;
 357         port->status_addr       = base + VSC_SATA_TF_STATUS_OFFSET;
 358         port->command_addr      = base + VSC_SATA_TF_COMMAND_OFFSET;
 359         port->altstatus_addr    = base + VSC_SATA_TF_ALTSTATUS_OFFSET;
 360         port->ctl_addr          = base + VSC_SATA_TF_CTL_OFFSET;
 361         port->bmdma_addr        = base + VSC_SATA_DMA_CMD_OFFSET;
 362         port->scr_addr          = base + VSC_SATA_SCR_STATUS_OFFSET;
 363         writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
 364         writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
 365 }
 366
 367
 368 static int __devinit vsc_sata_init_one(struct pci_dev *pdev,
 369                                        const struct pci_device_id *ent)
 370 {
 371         static const struct ata_port_info pi = {
 372                 .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 373                                   ATA_FLAG_MMIO,
 374                 .pio_mask       = 0x1f,
 375                 .mwdma_mask     = 0x07,
 376                 .udma_mask      = ATA_UDMA6,
 377                 .port_ops       = &vsc_sata_ops,
 378         };
 379         const struct ata_port_info *ppi[] = { &pi, NULL };
 380         static int printed_version;
 381         struct ata_host *host;
 382         void __iomem *mmio_base;
 383         int i, rc;
 384         u8 cls;
 385
 386         if (!printed_version++)
 387                 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 388
 389         /* allocate host */
 390         host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4);
 391         if (!host)
 392                 return -ENOMEM;
 393
 394         rc = pcim_enable_device(pdev);
 395         if (rc)
 396                 return rc;
 397
 398         /* check if we have needed resource mapped */
 399         if (pci_resource_len(pdev, 0) == 0)
 400                 return -ENODEV;
 401
 402         /* map IO regions and intialize host accordingly */
 403         rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
 404         if (rc == -EBUSY)
 405                 pcim_pin_device(pdev);
 406         if (rc)
 407                 return rc;
 408         host->iomap = pcim_iomap_table(pdev);
 409
 410         mmio_base = host->iomap[VSC_MMIO_BAR];
 411
 412         for (i = 0; i < host->n_ports; i++) {
 413                 struct ata_port *ap = host->ports[i];
 414                 unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET;
 415
 416                 vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset);
 417
 418                 ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio");
 419                 ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port");
 420         }
 421
 422         /*
 423          * Use 32 bit DMA mask, because 64 bit address support is poor.
 424          */
 425         rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 426         if (rc)
 427                 return rc;
 428         rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
 429         if (rc)
 430                 return rc;
 431
 432         /*
 433          * Due to a bug in the chip, the default cache line size can't be
 434          * used (unless the default is non-zero).
 435          */
 436         pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls);
 437         if (cls == 0x00)
 438                 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
 439
 440         if (pci_enable_msi(pdev) == 0)
 441                 pci_intx(pdev, 0);
 442
 443         /*
 444          * Config offset 0x98 is "Extended Control and Status Register 0"
 445          * Default value is (1 << 28).  All bits except bit 28 are reserved in
 446          * DPA mode.  If bit 28 is set, LED 0 reflects all ports' activity.
 447          * If bit 28 is clear, each port has its own LED.
 448          */
 449         pci_write_config_dword(pdev, 0x98, 0);
 450
 451         pci_set_master(pdev);
 452         return ata_host_activate(host, pdev->irq, vsc_sata_interrupt,
 453                                  IRQF_SHARED, &vsc_sata_sht);
 454 }
 455
 456 static const struct pci_device_id vsc_sata_pci_tbl[] = {
 457         { PCI_VENDOR_ID_VITESSE, 0x7174,
 458           PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
 459         { PCI_VENDOR_ID_INTEL, 0x3200,
 460           PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
 461
 462         { }     /* terminate list */
 463 };
 464
 465 static struct pci_driver vsc_sata_pci_driver = {
 466         .name                   = DRV_NAME,
 467         .id_table               = vsc_sata_pci_tbl,
 468         .probe                  = vsc_sata_init_one,
 469         .remove                 = ata_pci_remove_one,
 470 };
 471
 472 static int __init vsc_sata_init(void)
 473 {
 474         return pci_register_driver(&vsc_sata_pci_driver);
 475 }
 476
 477 static void __exit vsc_sata_exit(void)
 478 {
 479         pci_unregister_driver(&vsc_sata_pci_driver);
 480 }
 481
 482 MODULE_AUTHOR("Jeremy Higdon");
 483 MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller");
 484 MODULE_LICENSE("GPL");
 485 MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl);
 486 MODULE_VERSION(DRV_VERSION);
 487
 488 module_init(vsc_sata_init);
 489 module_exit(vsc_sata_exit);