2 * experimental driver for simple i2c audio chips.
4 * Copyright (c) 2000 Gerd Knorr
6 * Eric Sandeen (eric_sandeen@bigfoot.com)
7 * Steve VanDeBogart (vandebo@uclink.berkeley.edu)
8 * Greg Alexander (galexand@acm.org)
10 * This code is placed under the terms of the GNU General Public License
13 * debug - set to 1 if you'd like to see debug messages
17 #include <linux/module.h>
18 #include <linux/kernel.h>
19 #include <linux/sched.h>
20 #include <linux/string.h>
21 #include <linux/timer.h>
22 #include <linux/delay.h>
23 #include <linux/errno.h>
24 #include <linux/slab.h>
25 #include <linux/videodev.h>
26 #include <linux/i2c.h>
27 #include <linux/init.h>
28 #include <linux/kthread.h>
29 #include <linux/freezer.h>
31 #include <media/tvaudio.h>
32 #include <media/v4l2-common.h>
33 #include <media/v4l2-chip-ident.h>
34 #include <media/v4l2-i2c-drv-legacy.h>
36 #include <media/i2c-addr.h>
38 /* ---------------------------------------------------------------------- */
41 static int debug
= 0; /* insmod parameter */
42 module_param(debug
, int, 0644);
44 MODULE_DESCRIPTION("device driver for various i2c TV sound decoder / audiomux chips");
45 MODULE_AUTHOR("Eric Sandeen, Steve VanDeBogart, Greg Alexander, Gerd Knorr");
46 MODULE_LICENSE("GPL");
50 /* ---------------------------------------------------------------------- */
56 typedef int (*getvalue
)(int);
57 typedef int (*checkit
)(struct CHIPSTATE
*);
58 typedef int (*initialize
)(struct CHIPSTATE
*);
59 typedef int (*getmode
)(struct CHIPSTATE
*);
60 typedef void (*setmode
)(struct CHIPSTATE
*, int mode
);
61 typedef void (*checkmode
)(struct CHIPSTATE
*);
64 typedef struct AUDIOCMD
{
65 int count
; /* # of bytes to send */
66 unsigned char bytes
[MAXREGS
+1]; /* addr, data, data, ... */
69 /* chip description */
71 char *name
; /* chip name */
73 int addr_lo
, addr_hi
; /* i2c address range */
74 int registers
; /* # of registers */
78 initialize initialize
;
80 #define CHIP_HAS_VOLUME 1
81 #define CHIP_HAS_BASSTREBLE 2
82 #define CHIP_HAS_INPUTSEL 4
84 /* various i2c command sequences */
87 /* which register has which value */
88 int leftreg
,rightreg
,treblereg
,bassreg
;
90 /* initialize with (defaults to 65535/65535/32768/32768 */
91 int leftinit
,rightinit
,trebleinit
,bassinit
;
93 /* functions to convert the values (v4l -> chip) */
94 getvalue volfunc
,treblefunc
,bassfunc
;
100 /* check / autoswitch audio after channel switches */
103 /* input switch register + values for v4l inputs */
109 static struct CHIPDESC chiplist
[];
111 /* current state of the chip */
113 struct i2c_client
*c
;
115 /* index into CHIPDESC array */
118 /* shadow register set */
121 /* current settings */
122 __u16 left
,right
,treble
,bass
,muted
,mode
;
128 struct task_struct
*thread
;
129 struct timer_list wt
;
134 /* ---------------------------------------------------------------------- */
137 static unsigned short normal_i2c
[] = {
138 I2C_ADDR_TDA8425
>> 1,
139 I2C_ADDR_TEA6300
>> 1,
140 I2C_ADDR_TEA6420
>> 1,
141 I2C_ADDR_TDA9840
>> 1,
142 I2C_ADDR_TDA985x_L
>> 1,
143 I2C_ADDR_TDA985x_H
>> 1,
144 I2C_ADDR_TDA9874
>> 1,
145 I2C_ADDR_PIC16C54
>> 1,
149 /* ---------------------------------------------------------------------- */
150 /* i2c I/O functions */
152 static int chip_write(struct CHIPSTATE
*chip
, int subaddr
, int val
)
154 unsigned char buffer
[2];
157 v4l_dbg(1, debug
, chip
->c
, "%s: chip_write: 0x%x\n",
159 chip
->shadow
.bytes
[1] = val
;
161 if (1 != i2c_master_send(chip
->c
,buffer
,1)) {
162 v4l_warn(chip
->c
, "%s: I/O error (write 0x%x)\n",
167 v4l_dbg(1, debug
, chip
->c
, "%s: chip_write: reg%d=0x%x\n",
168 chip
->c
->name
, subaddr
, val
);
169 chip
->shadow
.bytes
[subaddr
+1] = val
;
172 if (2 != i2c_master_send(chip
->c
,buffer
,2)) {
173 v4l_warn(chip
->c
, "%s: I/O error (write reg%d=0x%x)\n",
174 chip
->c
->name
, subaddr
, val
);
181 static int chip_write_masked(struct CHIPSTATE
*chip
, int subaddr
, int val
, int mask
)
185 val
= (chip
->shadow
.bytes
[1] & ~mask
) | (val
& mask
);
187 val
= (chip
->shadow
.bytes
[subaddr
+1] & ~mask
) | (val
& mask
);
190 return chip_write(chip
, subaddr
, val
);
193 static int chip_read(struct CHIPSTATE
*chip
)
195 unsigned char buffer
;
197 if (1 != i2c_master_recv(chip
->c
,&buffer
,1)) {
198 v4l_warn(chip
->c
, "%s: I/O error (read)\n",
202 v4l_dbg(1, debug
, chip
->c
, "%s: chip_read: 0x%x\n",chip
->c
->name
, buffer
);
206 static int chip_read2(struct CHIPSTATE
*chip
, int subaddr
)
208 unsigned char write
[1];
209 unsigned char read
[1];
210 struct i2c_msg msgs
[2] = {
211 { chip
->c
->addr
, 0, 1, write
},
212 { chip
->c
->addr
, I2C_M_RD
, 1, read
}
216 if (2 != i2c_transfer(chip
->c
->adapter
,msgs
,2)) {
217 v4l_warn(chip
->c
, "%s: I/O error (read2)\n", chip
->c
->name
);
220 v4l_dbg(1, debug
, chip
->c
, "%s: chip_read2: reg%d=0x%x\n",
221 chip
->c
->name
, subaddr
,read
[0]);
225 static int chip_cmd(struct CHIPSTATE
*chip
, char *name
, audiocmd
*cmd
)
232 /* update our shadow register set; print bytes if (debug > 0) */
233 v4l_dbg(1, debug
, chip
->c
, "%s: chip_cmd(%s): reg=%d, data:",
234 chip
->c
->name
, name
,cmd
->bytes
[0]);
235 for (i
= 1; i
< cmd
->count
; i
++) {
237 printk(" 0x%x",cmd
->bytes
[i
]);
238 chip
->shadow
.bytes
[i
+cmd
->bytes
[0]] = cmd
->bytes
[i
];
243 /* send data to the chip */
244 if (cmd
->count
!= i2c_master_send(chip
->c
,cmd
->bytes
,cmd
->count
)) {
245 v4l_warn(chip
->c
, "%s: I/O error (%s)\n", chip
->c
->name
, name
);
251 /* ---------------------------------------------------------------------- */
252 /* kernel thread for doing i2c stuff asyncronly
253 * right now it is used only to check the audio mode (mono/stereo/whatever)
254 * some time after switching to another TV channel, then turn on stereo
258 static void chip_thread_wake(unsigned long data
)
260 struct CHIPSTATE
*chip
= (struct CHIPSTATE
*)data
;
261 wake_up_process(chip
->thread
);
264 static int chip_thread(void *data
)
266 struct CHIPSTATE
*chip
= data
;
267 struct CHIPDESC
*desc
= chiplist
+ chip
->type
;
269 v4l_dbg(1, debug
, chip
->c
, "%s: thread started\n", chip
->c
->name
);
272 set_current_state(TASK_INTERRUPTIBLE
);
273 if (!kthread_should_stop())
275 set_current_state(TASK_RUNNING
);
277 if (kthread_should_stop())
279 v4l_dbg(1, debug
, chip
->c
, "%s: thread wakeup\n", chip
->c
->name
);
281 /* don't do anything for radio or if mode != auto */
282 if (chip
->radio
|| chip
->mode
!= 0)
285 /* have a look what's going on */
286 desc
->checkmode(chip
);
288 /* schedule next check */
289 mod_timer(&chip
->wt
, jiffies
+msecs_to_jiffies(2000));
292 v4l_dbg(1, debug
, chip
->c
, "%s: thread exiting\n", chip
->c
->name
);
296 static void generic_checkmode(struct CHIPSTATE
*chip
)
298 struct CHIPDESC
*desc
= chiplist
+ chip
->type
;
299 int mode
= desc
->getmode(chip
);
301 if (mode
== chip
->prevmode
)
304 v4l_dbg(1, debug
, chip
->c
, "%s: thread checkmode\n", chip
->c
->name
);
305 chip
->prevmode
= mode
;
307 if (mode
& V4L2_TUNER_MODE_STEREO
)
308 desc
->setmode(chip
,V4L2_TUNER_MODE_STEREO
);
309 if (mode
& V4L2_TUNER_MODE_LANG1_LANG2
)
310 desc
->setmode(chip
,V4L2_TUNER_MODE_STEREO
);
311 else if (mode
& V4L2_TUNER_MODE_LANG1
)
312 desc
->setmode(chip
,V4L2_TUNER_MODE_LANG1
);
313 else if (mode
& V4L2_TUNER_MODE_LANG2
)
314 desc
->setmode(chip
,V4L2_TUNER_MODE_LANG2
);
316 desc
->setmode(chip
,V4L2_TUNER_MODE_MONO
);
319 /* ---------------------------------------------------------------------- */
320 /* audio chip descriptions - defines+functions for tda9840 */
322 #define TDA9840_SW 0x00
323 #define TDA9840_LVADJ 0x02
324 #define TDA9840_STADJ 0x03
325 #define TDA9840_TEST 0x04
327 #define TDA9840_MONO 0x10
328 #define TDA9840_STEREO 0x2a
329 #define TDA9840_DUALA 0x12
330 #define TDA9840_DUALB 0x1e
331 #define TDA9840_DUALAB 0x1a
332 #define TDA9840_DUALBA 0x16
333 #define TDA9840_EXTERNAL 0x7a
335 #define TDA9840_DS_DUAL 0x20 /* Dual sound identified */
336 #define TDA9840_ST_STEREO 0x40 /* Stereo sound identified */
337 #define TDA9840_PONRES 0x80 /* Power-on reset detected if = 1 */
339 #define TDA9840_TEST_INT1SN 0x1 /* Integration time 0.5s when set */
340 #define TDA9840_TEST_INTFU 0x02 /* Disables integrator function */
342 static int tda9840_getmode(struct CHIPSTATE
*chip
)
346 val
= chip_read(chip
);
347 mode
= V4L2_TUNER_MODE_MONO
;
348 if (val
& TDA9840_DS_DUAL
)
349 mode
|= V4L2_TUNER_MODE_LANG1
| V4L2_TUNER_MODE_LANG2
;
350 if (val
& TDA9840_ST_STEREO
)
351 mode
|= V4L2_TUNER_MODE_STEREO
;
353 v4l_dbg(1, debug
, chip
->c
, "tda9840_getmode(): raw chip read: %d, return: %d\n",
358 static void tda9840_setmode(struct CHIPSTATE
*chip
, int mode
)
361 int t
= chip
->shadow
.bytes
[TDA9840_SW
+ 1] & ~0x7e;
364 case V4L2_TUNER_MODE_MONO
:
367 case V4L2_TUNER_MODE_STEREO
:
370 case V4L2_TUNER_MODE_LANG1
:
373 case V4L2_TUNER_MODE_LANG2
:
381 chip_write(chip
, TDA9840_SW
, t
);
384 static int tda9840_checkit(struct CHIPSTATE
*chip
)
387 rc
= chip_read(chip
);
388 /* lower 5 bits should be 0 */
389 return ((rc
& 0x1f) == 0) ? 1 : 0;
392 /* ---------------------------------------------------------------------- */
393 /* audio chip descriptions - defines+functions for tda985x */
395 /* subaddresses for TDA9855 */
396 #define TDA9855_VR 0x00 /* Volume, right */
397 #define TDA9855_VL 0x01 /* Volume, left */
398 #define TDA9855_BA 0x02 /* Bass */
399 #define TDA9855_TR 0x03 /* Treble */
400 #define TDA9855_SW 0x04 /* Subwoofer - not connected on DTV2000 */
402 /* subaddresses for TDA9850 */
403 #define TDA9850_C4 0x04 /* Control 1 for TDA9850 */
405 /* subaddesses for both chips */
406 #define TDA985x_C5 0x05 /* Control 2 for TDA9850, Control 1 for TDA9855 */
407 #define TDA985x_C6 0x06 /* Control 3 for TDA9850, Control 2 for TDA9855 */
408 #define TDA985x_C7 0x07 /* Control 4 for TDA9850, Control 3 for TDA9855 */
409 #define TDA985x_A1 0x08 /* Alignment 1 for both chips */
410 #define TDA985x_A2 0x09 /* Alignment 2 for both chips */
411 #define TDA985x_A3 0x0a /* Alignment 3 for both chips */
413 /* Masks for bits in TDA9855 subaddresses */
414 /* 0x00 - VR in TDA9855 */
415 /* 0x01 - VL in TDA9855 */
416 /* lower 7 bits control gain from -71dB (0x28) to 16dB (0x7f)
417 * in 1dB steps - mute is 0x27 */
420 /* 0x02 - BA in TDA9855 */
421 /* lower 5 bits control bass gain from -12dB (0x06) to 16.5dB (0x19)
422 * in .5dB steps - 0 is 0x0E */
425 /* 0x03 - TR in TDA9855 */
426 /* 4 bits << 1 control treble gain from -12dB (0x3) to 12dB (0xb)
427 * in 3dB steps - 0 is 0x7 */
429 /* Masks for bits in both chips' subaddresses */
430 /* 0x04 - SW in TDA9855, C4/Control 1 in TDA9850 */
431 /* Unique to TDA9855: */
432 /* 4 bits << 2 control subwoofer/surround gain from -14db (0x1) to 14db (0xf)
433 * in 3dB steps - mute is 0x0 */
435 /* Unique to TDA9850: */
436 /* lower 4 bits control stereo noise threshold, over which stereo turns off
437 * set to values of 0x00 through 0x0f for Ster1 through Ster16 */
440 /* 0x05 - C5 - Control 1 in TDA9855 , Control 2 in TDA9850*/
441 /* Unique to TDA9855: */
442 #define TDA9855_MUTE 1<<7 /* GMU, Mute at outputs */
443 #define TDA9855_AVL 1<<6 /* AVL, Automatic Volume Level */
444 #define TDA9855_LOUD 1<<5 /* Loudness, 1==off */
445 #define TDA9855_SUR 1<<3 /* Surround / Subwoofer 1==.5(L-R) 0==.5(L+R) */
446 /* Bits 0 to 3 select various combinations
447 * of line in and line out, only the
448 * interesting ones are defined */
449 #define TDA9855_EXT 1<<2 /* Selects inputs LIR and LIL. Pins 41 & 12 */
450 #define TDA9855_INT 0 /* Selects inputs LOR and LOL. (internal) */
452 /* Unique to TDA9850: */
453 /* lower 4 bits contol SAP noise threshold, over which SAP turns off
454 * set to values of 0x00 through 0x0f for SAP1 through SAP16 */
457 /* 0x06 - C6 - Control 2 in TDA9855, Control 3 in TDA9850 */
458 /* Common to TDA9855 and TDA9850: */
459 #define TDA985x_SAP 3<<6 /* Selects SAP output, mute if not received */
460 #define TDA985x_STEREO 1<<6 /* Selects Stereo ouput, mono if not received */
461 #define TDA985x_MONO 0 /* Forces Mono output */
462 #define TDA985x_LMU 1<<3 /* Mute (LOR/LOL for 9855, OUTL/OUTR for 9850) */
464 /* Unique to TDA9855: */
465 #define TDA9855_TZCM 1<<5 /* If set, don't mute till zero crossing */
466 #define TDA9855_VZCM 1<<4 /* If set, don't change volume till zero crossing*/
467 #define TDA9855_LINEAR 0 /* Linear Stereo */
468 #define TDA9855_PSEUDO 1 /* Pseudo Stereo */
469 #define TDA9855_SPAT_30 2 /* Spatial Stereo, 30% anti-phase crosstalk */
470 #define TDA9855_SPAT_50 3 /* Spatial Stereo, 52% anti-phase crosstalk */
471 #define TDA9855_E_MONO 7 /* Forced mono - mono select elseware, so useless*/
473 /* 0x07 - C7 - Control 3 in TDA9855, Control 4 in TDA9850 */
474 /* Common to both TDA9855 and TDA9850: */
475 /* lower 4 bits control input gain from -3.5dB (0x0) to 4dB (0xF)
476 * in .5dB steps - 0dB is 0x7 */
478 /* 0x08, 0x09 - A1 and A2 (read/write) */
479 /* Common to both TDA9855 and TDA9850: */
480 /* lower 5 bites are wideband and spectral expander alignment
481 * from 0x00 to 0x1f - nominal at 0x0f and 0x10 (read/write) */
482 #define TDA985x_STP 1<<5 /* Stereo Pilot/detect (read-only) */
483 #define TDA985x_SAPP 1<<6 /* SAP Pilot/detect (read-only) */
484 #define TDA985x_STS 1<<7 /* Stereo trigger 1= <35mV 0= <30mV (write-only)*/
487 /* Common to both TDA9855 and TDA9850: */
488 /* lower 3 bits control timing current for alignment: -30% (0x0), -20% (0x1),
489 * -10% (0x2), nominal (0x3), +10% (0x6), +20% (0x5), +30% (0x4) */
490 #define TDA985x_ADJ 1<<7 /* Stereo adjust on/off (wideband and spectral */
492 static int tda9855_volume(int val
) { return val
/0x2e8+0x27; }
493 static int tda9855_bass(int val
) { return val
/0xccc+0x06; }
494 static int tda9855_treble(int val
) { return (val
/0x1c71+0x3)<<1; }
496 static int tda985x_getmode(struct CHIPSTATE
*chip
)
500 mode
= ((TDA985x_STP
| TDA985x_SAPP
) &
501 chip_read(chip
)) >> 4;
502 /* Add mono mode regardless of SAP and stereo */
503 /* Allows forced mono */
504 return mode
| V4L2_TUNER_MODE_MONO
;
507 static void tda985x_setmode(struct CHIPSTATE
*chip
, int mode
)
510 int c6
= chip
->shadow
.bytes
[TDA985x_C6
+1] & 0x3f;
513 case V4L2_TUNER_MODE_MONO
:
516 case V4L2_TUNER_MODE_STEREO
:
517 c6
|= TDA985x_STEREO
;
519 case V4L2_TUNER_MODE_LANG1
:
526 chip_write(chip
,TDA985x_C6
,c6
);
530 /* ---------------------------------------------------------------------- */
531 /* audio chip descriptions - defines+functions for tda9873h */
533 /* Subaddresses for TDA9873H */
535 #define TDA9873_SW 0x00 /* Switching */
536 #define TDA9873_AD 0x01 /* Adjust */
537 #define TDA9873_PT 0x02 /* Port */
539 /* Subaddress 0x00: Switching Data
542 * B1, B0: Input source selection
544 * 1, 0 external stereo
547 #define TDA9873_INP_MASK 3
548 #define TDA9873_INTERNAL 0
549 #define TDA9873_EXT_STEREO 2
550 #define TDA9873_EXT_MONO 1
552 /* B3, B2: output signal select
553 * B4 : transmission mode
556 * 1, 1, 1 Stereo (reversed channel)
563 #define TDA9873_TR_MASK (7 << 2)
564 #define TDA9873_TR_MONO 4
565 #define TDA9873_TR_STEREO 1 << 4
566 #define TDA9873_TR_REVERSE (1 << 3) & (1 << 2)
567 #define TDA9873_TR_DUALA 1 << 2
568 #define TDA9873_TR_DUALB 1 << 3
570 /* output level controls
571 * B5: output level switch (0 = reduced gain, 1 = normal gain)
572 * B6: mute (1 = muted)
573 * B7: auto-mute (1 = auto-mute enabled)
576 #define TDA9873_GAIN_NORMAL 1 << 5
577 #define TDA9873_MUTE 1 << 6
578 #define TDA9873_AUTOMUTE 1 << 7
580 /* Subaddress 0x01: Adjust/standard */
582 /* Lower 4 bits (C3..C0) control stereo adjustment on R channel (-0.6 - +0.7 dB)
583 * Recommended value is +0 dB
586 #define TDA9873_STEREO_ADJ 0x06 /* 0dB gain */
588 /* Bits C6..C4 control FM stantard
590 * 0, 0, 0 B/G (PAL FM)
599 #define TDA9873_DK1 2
600 #define TDA9873_DK2 3
601 #define TDA9873_DK3 4
604 /* C7 controls identification response time (1=fast/0=normal)
606 #define TDA9873_IDR_NORM 0
607 #define TDA9873_IDR_FAST 1 << 7
610 /* Subaddress 0x02: Port data */
612 /* E1, E0 free programmable ports P1/P2
619 #define TDA9873_PORTS 3
622 #define TDA9873_TST_PORT 1 << 2
624 /* E5..E3 control mono output channel (together with transmission mode bit B4)
629 * 0 1 0 1 mono (from stereo decoder)
631 #define TDA9873_MOUT_MONO 0
632 #define TDA9873_MOUT_FMONO 0
633 #define TDA9873_MOUT_DUALA 0
634 #define TDA9873_MOUT_DUALB 1 << 3
635 #define TDA9873_MOUT_ST 1 << 4
636 #define TDA9873_MOUT_EXTM (1 << 4 ) & (1 << 3)
637 #define TDA9873_MOUT_EXTL 1 << 5
638 #define TDA9873_MOUT_EXTR (1 << 5 ) & (1 << 3)
639 #define TDA9873_MOUT_EXTLR (1 << 5 ) & (1 << 4)
640 #define TDA9873_MOUT_MUTE (1 << 5 ) & (1 << 4) & (1 << 3)
642 /* Status bits: (chip read) */
643 #define TDA9873_PONR 0 /* Power-on reset detected if = 1 */
644 #define TDA9873_STEREO 2 /* Stereo sound is identified */
645 #define TDA9873_DUAL 4 /* Dual sound is identified */
647 static int tda9873_getmode(struct CHIPSTATE
*chip
)
651 val
= chip_read(chip
);
652 mode
= V4L2_TUNER_MODE_MONO
;
653 if (val
& TDA9873_STEREO
)
654 mode
|= V4L2_TUNER_MODE_STEREO
;
655 if (val
& TDA9873_DUAL
)
656 mode
|= V4L2_TUNER_MODE_LANG1
| V4L2_TUNER_MODE_LANG2
;
657 v4l_dbg(1, debug
, chip
->c
, "tda9873_getmode(): raw chip read: %d, return: %d\n",
662 static void tda9873_setmode(struct CHIPSTATE
*chip
, int mode
)
664 int sw_data
= chip
->shadow
.bytes
[TDA9873_SW
+1] & ~ TDA9873_TR_MASK
;
665 /* int adj_data = chip->shadow.bytes[TDA9873_AD+1] ; */
667 if ((sw_data
& TDA9873_INP_MASK
) != TDA9873_INTERNAL
) {
668 v4l_dbg(1, debug
, chip
->c
, "tda9873_setmode(): external input\n");
672 v4l_dbg(1, debug
, chip
->c
, "tda9873_setmode(): chip->shadow.bytes[%d] = %d\n", TDA9873_SW
+1, chip
->shadow
.bytes
[TDA9873_SW
+1]);
673 v4l_dbg(1, debug
, chip
->c
, "tda9873_setmode(): sw_data = %d\n", sw_data
);
676 case V4L2_TUNER_MODE_MONO
:
677 sw_data
|= TDA9873_TR_MONO
;
679 case V4L2_TUNER_MODE_STEREO
:
680 sw_data
|= TDA9873_TR_STEREO
;
682 case V4L2_TUNER_MODE_LANG1
:
683 sw_data
|= TDA9873_TR_DUALA
;
685 case V4L2_TUNER_MODE_LANG2
:
686 sw_data
|= TDA9873_TR_DUALB
;
693 chip_write(chip
, TDA9873_SW
, sw_data
);
694 v4l_dbg(1, debug
, chip
->c
, "tda9873_setmode(): req. mode %d; chip_write: %d\n",
698 static int tda9873_checkit(struct CHIPSTATE
*chip
)
702 if (-1 == (rc
= chip_read2(chip
,254)))
704 return (rc
& ~0x1f) == 0x80;
708 /* ---------------------------------------------------------------------- */
709 /* audio chip description - defines+functions for tda9874h and tda9874a */
710 /* Dariusz Kowalewski <darekk@automex.pl> */
712 /* Subaddresses for TDA9874H and TDA9874A (slave rx) */
713 #define TDA9874A_AGCGR 0x00 /* AGC gain */
714 #define TDA9874A_GCONR 0x01 /* general config */
715 #define TDA9874A_MSR 0x02 /* monitor select */
716 #define TDA9874A_C1FRA 0x03 /* carrier 1 freq. */
717 #define TDA9874A_C1FRB 0x04 /* carrier 1 freq. */
718 #define TDA9874A_C1FRC 0x05 /* carrier 1 freq. */
719 #define TDA9874A_C2FRA 0x06 /* carrier 2 freq. */
720 #define TDA9874A_C2FRB 0x07 /* carrier 2 freq. */
721 #define TDA9874A_C2FRC 0x08 /* carrier 2 freq. */
722 #define TDA9874A_DCR 0x09 /* demodulator config */
723 #define TDA9874A_FMER 0x0a /* FM de-emphasis */
724 #define TDA9874A_FMMR 0x0b /* FM dematrix */
725 #define TDA9874A_C1OLAR 0x0c /* ch.1 output level adj. */
726 #define TDA9874A_C2OLAR 0x0d /* ch.2 output level adj. */
727 #define TDA9874A_NCONR 0x0e /* NICAM config */
728 #define TDA9874A_NOLAR 0x0f /* NICAM output level adj. */
729 #define TDA9874A_NLELR 0x10 /* NICAM lower error limit */
730 #define TDA9874A_NUELR 0x11 /* NICAM upper error limit */
731 #define TDA9874A_AMCONR 0x12 /* audio mute control */
732 #define TDA9874A_SDACOSR 0x13 /* stereo DAC output select */
733 #define TDA9874A_AOSR 0x14 /* analog output select */
734 #define TDA9874A_DAICONR 0x15 /* digital audio interface config */
735 #define TDA9874A_I2SOSR 0x16 /* I2S-bus output select */
736 #define TDA9874A_I2SOLAR 0x17 /* I2S-bus output level adj. */
737 #define TDA9874A_MDACOSR 0x18 /* mono DAC output select (tda9874a) */
738 #define TDA9874A_ESP 0xFF /* easy standard progr. (tda9874a) */
740 /* Subaddresses for TDA9874H and TDA9874A (slave tx) */
741 #define TDA9874A_DSR 0x00 /* device status */
742 #define TDA9874A_NSR 0x01 /* NICAM status */
743 #define TDA9874A_NECR 0x02 /* NICAM error count */
744 #define TDA9874A_DR1 0x03 /* add. data LSB */
745 #define TDA9874A_DR2 0x04 /* add. data MSB */
746 #define TDA9874A_LLRA 0x05 /* monitor level read-out LSB */
747 #define TDA9874A_LLRB 0x06 /* monitor level read-out MSB */
748 #define TDA9874A_SIFLR 0x07 /* SIF level */
749 #define TDA9874A_TR2 252 /* test reg. 2 */
750 #define TDA9874A_TR1 253 /* test reg. 1 */
751 #define TDA9874A_DIC 254 /* device id. code */
752 #define TDA9874A_SIC 255 /* software id. code */
755 static int tda9874a_mode
= 1; /* 0: A2, 1: NICAM */
756 static int tda9874a_GCONR
= 0xc0; /* default config. input pin: SIFSEL=0 */
757 static int tda9874a_NCONR
= 0x01; /* default NICAM config.: AMSEL=0,AMUTE=1 */
758 static int tda9874a_ESP
= 0x07; /* default standard: NICAM D/K */
759 static int tda9874a_dic
= -1; /* device id. code */
761 /* insmod options for tda9874a */
762 static unsigned int tda9874a_SIF
= UNSET
;
763 static unsigned int tda9874a_AMSEL
= UNSET
;
764 static unsigned int tda9874a_STD
= UNSET
;
765 module_param(tda9874a_SIF
, int, 0444);
766 module_param(tda9874a_AMSEL
, int, 0444);
767 module_param(tda9874a_STD
, int, 0444);
770 * initialization table for tda9874 decoder:
771 * - carrier 1 freq. registers (3 bytes)
772 * - carrier 2 freq. registers (3 bytes)
773 * - demudulator config register
774 * - FM de-emphasis register (slow identification mode)
775 * Note: frequency registers must be written in single i2c transfer.
777 static struct tda9874a_MODES
{
780 } tda9874a_modelist
[9] = {
782 { 9, { TDA9874A_C1FRA
, 0x72,0x95,0x55, 0x77,0xA0,0x00, 0x00,0x00 }} },
784 { 9, { TDA9874A_C1FRA
, 0x5D,0xC0,0x00, 0x62,0x6A,0xAA, 0x20,0x22 }} },
786 { 9, { TDA9874A_C1FRA
, 0x87,0x6A,0xAA, 0x82,0x60,0x00, 0x00,0x00 }} },
788 { 9, { TDA9874A_C1FRA
, 0x87,0x6A,0xAA, 0x8C,0x75,0x55, 0x00,0x00 }} },
790 { 9, { TDA9874A_C1FRA
, 0x87,0x6A,0xAA, 0x77,0xA0,0x00, 0x00,0x00 }} },
792 { 9, { TDA9874A_C1FRA
, 0x7D,0x00,0x00, 0x88,0x8A,0xAA, 0x08,0x33 }} },
794 { 9, { TDA9874A_C1FRA
, 0x72,0x95,0x55, 0x79,0xEA,0xAA, 0x08,0x33 }} },
795 { "NICAM, D/K", /* default */
796 { 9, { TDA9874A_C1FRA
, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x08,0x33 }} },
798 { 9, { TDA9874A_C1FRA
, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x09,0x33 }} }
801 static int tda9874a_setup(struct CHIPSTATE
*chip
)
803 chip_write(chip
, TDA9874A_AGCGR
, 0x00); /* 0 dB */
804 chip_write(chip
, TDA9874A_GCONR
, tda9874a_GCONR
);
805 chip_write(chip
, TDA9874A_MSR
, (tda9874a_mode
) ? 0x03:0x02);
806 if(tda9874a_dic
== 0x11) {
807 chip_write(chip
, TDA9874A_FMMR
, 0x80);
808 } else { /* dic == 0x07 */
809 chip_cmd(chip
,"tda9874_modelist",&tda9874a_modelist
[tda9874a_STD
].cmd
);
810 chip_write(chip
, TDA9874A_FMMR
, 0x00);
812 chip_write(chip
, TDA9874A_C1OLAR
, 0x00); /* 0 dB */
813 chip_write(chip
, TDA9874A_C2OLAR
, 0x00); /* 0 dB */
814 chip_write(chip
, TDA9874A_NCONR
, tda9874a_NCONR
);
815 chip_write(chip
, TDA9874A_NOLAR
, 0x00); /* 0 dB */
816 /* Note: If signal quality is poor you may want to change NICAM */
817 /* error limit registers (NLELR and NUELR) to some greater values. */
818 /* Then the sound would remain stereo, but won't be so clear. */
819 chip_write(chip
, TDA9874A_NLELR
, 0x14); /* default */
820 chip_write(chip
, TDA9874A_NUELR
, 0x50); /* default */
822 if(tda9874a_dic
== 0x11) {
823 chip_write(chip
, TDA9874A_AMCONR
, 0xf9);
824 chip_write(chip
, TDA9874A_SDACOSR
, (tda9874a_mode
) ? 0x81:0x80);
825 chip_write(chip
, TDA9874A_AOSR
, 0x80);
826 chip_write(chip
, TDA9874A_MDACOSR
, (tda9874a_mode
) ? 0x82:0x80);
827 chip_write(chip
, TDA9874A_ESP
, tda9874a_ESP
);
828 } else { /* dic == 0x07 */
829 chip_write(chip
, TDA9874A_AMCONR
, 0xfb);
830 chip_write(chip
, TDA9874A_SDACOSR
, (tda9874a_mode
) ? 0x81:0x80);
831 chip_write(chip
, TDA9874A_AOSR
, 0x00); /* or 0x10 */
833 v4l_dbg(1, debug
, chip
->c
, "tda9874a_setup(): %s [0x%02X].\n",
834 tda9874a_modelist
[tda9874a_STD
].name
,tda9874a_STD
);
838 static int tda9874a_getmode(struct CHIPSTATE
*chip
)
841 int necr
; /* just for debugging */
843 mode
= V4L2_TUNER_MODE_MONO
;
845 if(-1 == (dsr
= chip_read2(chip
,TDA9874A_DSR
)))
847 if(-1 == (nsr
= chip_read2(chip
,TDA9874A_NSR
)))
849 if(-1 == (necr
= chip_read2(chip
,TDA9874A_NECR
)))
852 /* need to store dsr/nsr somewhere */
853 chip
->shadow
.bytes
[MAXREGS
-2] = dsr
;
854 chip
->shadow
.bytes
[MAXREGS
-1] = nsr
;
857 /* Note: DSR.RSSF and DSR.AMSTAT bits are also checked.
858 * If NICAM auto-muting is enabled, DSR.AMSTAT=1 indicates
859 * that sound has (temporarily) switched from NICAM to
860 * mono FM (or AM) on 1st sound carrier due to high NICAM bit
861 * error count. So in fact there is no stereo in this case :-(
862 * But changing the mode to V4L2_TUNER_MODE_MONO would switch
863 * external 4052 multiplexer in audio_hook().
865 if(nsr
& 0x02) /* NSR.S/MB=1 */
866 mode
|= V4L2_TUNER_MODE_STEREO
;
867 if(nsr
& 0x01) /* NSR.D/SB=1 */
868 mode
|= V4L2_TUNER_MODE_LANG1
| V4L2_TUNER_MODE_LANG2
;
870 if(dsr
& 0x02) /* DSR.IDSTE=1 */
871 mode
|= V4L2_TUNER_MODE_STEREO
;
872 if(dsr
& 0x04) /* DSR.IDDUA=1 */
873 mode
|= V4L2_TUNER_MODE_LANG1
| V4L2_TUNER_MODE_LANG2
;
876 v4l_dbg(1, debug
, chip
->c
, "tda9874a_getmode(): DSR=0x%X, NSR=0x%X, NECR=0x%X, return: %d.\n",
877 dsr
, nsr
, necr
, mode
);
881 static void tda9874a_setmode(struct CHIPSTATE
*chip
, int mode
)
883 /* Disable/enable NICAM auto-muting (based on DSR.RSSF status bit). */
884 /* If auto-muting is disabled, we can hear a signal of degrading quality. */
886 if(chip
->shadow
.bytes
[MAXREGS
-2] & 0x20) /* DSR.RSSF=1 */
887 tda9874a_NCONR
&= 0xfe; /* enable */
889 tda9874a_NCONR
|= 0x01; /* disable */
890 chip_write(chip
, TDA9874A_NCONR
, tda9874a_NCONR
);
893 /* Note: TDA9874A supports automatic FM dematrixing (FMMR register)
894 * and has auto-select function for audio output (AOSR register).
895 * Old TDA9874H doesn't support these features.
896 * TDA9874A also has additional mono output pin (OUTM), which
897 * on same (all?) tv-cards is not used, anyway (as well as MONOIN).
899 if(tda9874a_dic
== 0x11) {
901 int mdacosr
= (tda9874a_mode
) ? 0x82:0x80;
904 case V4L2_TUNER_MODE_MONO
:
905 case V4L2_TUNER_MODE_STEREO
:
907 case V4L2_TUNER_MODE_LANG1
:
908 aosr
= 0x80; /* auto-select, dual A/A */
909 mdacosr
= (tda9874a_mode
) ? 0x82:0x80;
911 case V4L2_TUNER_MODE_LANG2
:
912 aosr
= 0xa0; /* auto-select, dual B/B */
913 mdacosr
= (tda9874a_mode
) ? 0x83:0x81;
919 chip_write(chip
, TDA9874A_AOSR
, aosr
);
920 chip_write(chip
, TDA9874A_MDACOSR
, mdacosr
);
922 v4l_dbg(1, debug
, chip
->c
, "tda9874a_setmode(): req. mode %d; AOSR=0x%X, MDACOSR=0x%X.\n",
923 mode
, aosr
, mdacosr
);
925 } else { /* dic == 0x07 */
929 case V4L2_TUNER_MODE_MONO
:
930 fmmr
= 0x00; /* mono */
931 aosr
= 0x10; /* A/A */
933 case V4L2_TUNER_MODE_STEREO
:
936 aosr
= 0x00; /* handled by NICAM auto-mute */
938 fmmr
= (tda9874a_ESP
== 1) ? 0x05 : 0x04; /* stereo */
942 case V4L2_TUNER_MODE_LANG1
:
943 fmmr
= 0x02; /* dual */
944 aosr
= 0x10; /* dual A/A */
946 case V4L2_TUNER_MODE_LANG2
:
947 fmmr
= 0x02; /* dual */
948 aosr
= 0x20; /* dual B/B */
954 chip_write(chip
, TDA9874A_FMMR
, fmmr
);
955 chip_write(chip
, TDA9874A_AOSR
, aosr
);
957 v4l_dbg(1, debug
, chip
->c
, "tda9874a_setmode(): req. mode %d; FMMR=0x%X, AOSR=0x%X.\n",
962 static int tda9874a_checkit(struct CHIPSTATE
*chip
)
964 int dic
,sic
; /* device id. and software id. codes */
966 if(-1 == (dic
= chip_read2(chip
,TDA9874A_DIC
)))
968 if(-1 == (sic
= chip_read2(chip
,TDA9874A_SIC
)))
971 v4l_dbg(1, debug
, chip
->c
, "tda9874a_checkit(): DIC=0x%X, SIC=0x%X.\n", dic
, sic
);
973 if((dic
== 0x11)||(dic
== 0x07)) {
974 v4l_info(chip
->c
, "found tda9874%s.\n", (dic
== 0x11) ? "a":"h");
975 tda9874a_dic
= dic
; /* remember device id. */
978 return 0; /* not found */
981 static int tda9874a_initialize(struct CHIPSTATE
*chip
)
983 if (tda9874a_SIF
> 2)
985 if (tda9874a_STD
> 8)
987 if(tda9874a_AMSEL
> 1)
990 if(tda9874a_SIF
== 1)
991 tda9874a_GCONR
= 0xc0; /* sound IF input 1 */
993 tda9874a_GCONR
= 0xc1; /* sound IF input 2 */
995 tda9874a_ESP
= tda9874a_STD
;
996 tda9874a_mode
= (tda9874a_STD
< 5) ? 0 : 1;
998 if(tda9874a_AMSEL
== 0)
999 tda9874a_NCONR
= 0x01; /* auto-mute: analog mono input */
1001 tda9874a_NCONR
= 0x05; /* auto-mute: 1st carrier FM or AM */
1003 tda9874a_setup(chip
);
1008 /* ---------------------------------------------------------------------- */
1009 /* audio chip descriptions - defines+functions for tea6420 */
1011 #define TEA6300_VL 0x00 /* volume left */
1012 #define TEA6300_VR 0x01 /* volume right */
1013 #define TEA6300_BA 0x02 /* bass */
1014 #define TEA6300_TR 0x03 /* treble */
1015 #define TEA6300_FA 0x04 /* fader control */
1016 #define TEA6300_S 0x05 /* switch register */
1017 /* values for those registers: */
1018 #define TEA6300_S_SA 0x01 /* stereo A input */
1019 #define TEA6300_S_SB 0x02 /* stereo B */
1020 #define TEA6300_S_SC 0x04 /* stereo C */
1021 #define TEA6300_S_GMU 0x80 /* general mute */
1023 #define TEA6320_V 0x00 /* volume (0-5)/loudness off (6)/zero crossing mute(7) */
1024 #define TEA6320_FFR 0x01 /* fader front right (0-5) */
1025 #define TEA6320_FFL 0x02 /* fader front left (0-5) */
1026 #define TEA6320_FRR 0x03 /* fader rear right (0-5) */
1027 #define TEA6320_FRL 0x04 /* fader rear left (0-5) */
1028 #define TEA6320_BA 0x05 /* bass (0-4) */
1029 #define TEA6320_TR 0x06 /* treble (0-4) */
1030 #define TEA6320_S 0x07 /* switch register */
1031 /* values for those registers: */
1032 #define TEA6320_S_SA 0x07 /* stereo A input */
1033 #define TEA6320_S_SB 0x06 /* stereo B */
1034 #define TEA6320_S_SC 0x05 /* stereo C */
1035 #define TEA6320_S_SD 0x04 /* stereo D */
1036 #define TEA6320_S_GMU 0x80 /* general mute */
1038 #define TEA6420_S_SA 0x00 /* stereo A input */
1039 #define TEA6420_S_SB 0x01 /* stereo B */
1040 #define TEA6420_S_SC 0x02 /* stereo C */
1041 #define TEA6420_S_SD 0x03 /* stereo D */
1042 #define TEA6420_S_SE 0x04 /* stereo E */
1043 #define TEA6420_S_GMU 0x05 /* general mute */
1045 static int tea6300_shift10(int val
) { return val
>> 10; }
1046 static int tea6300_shift12(int val
) { return val
>> 12; }
1048 /* Assumes 16bit input (values 0x3f to 0x0c are unique, values less than */
1049 /* 0x0c mirror those immediately higher) */
1050 static int tea6320_volume(int val
) { return (val
/ (65535/(63-12)) + 12) & 0x3f; }
1051 static int tea6320_shift11(int val
) { return val
>> 11; }
1052 static int tea6320_initialize(struct CHIPSTATE
* chip
)
1054 chip_write(chip
, TEA6320_FFR
, 0x3f);
1055 chip_write(chip
, TEA6320_FFL
, 0x3f);
1056 chip_write(chip
, TEA6320_FRR
, 0x3f);
1057 chip_write(chip
, TEA6320_FRL
, 0x3f);
1063 /* ---------------------------------------------------------------------- */
1064 /* audio chip descriptions - defines+functions for tda8425 */
1066 #define TDA8425_VL 0x00 /* volume left */
1067 #define TDA8425_VR 0x01 /* volume right */
1068 #define TDA8425_BA 0x02 /* bass */
1069 #define TDA8425_TR 0x03 /* treble */
1070 #define TDA8425_S1 0x08 /* switch functions */
1071 /* values for those registers: */
1072 #define TDA8425_S1_OFF 0xEE /* audio off (mute on) */
1073 #define TDA8425_S1_CH1 0xCE /* audio channel 1 (mute off) - "linear stereo" mode */
1074 #define TDA8425_S1_CH2 0xCF /* audio channel 2 (mute off) - "linear stereo" mode */
1075 #define TDA8425_S1_MU 0x20 /* mute bit */
1076 #define TDA8425_S1_STEREO 0x18 /* stereo bits */
1077 #define TDA8425_S1_STEREO_SPATIAL 0x18 /* spatial stereo */
1078 #define TDA8425_S1_STEREO_LINEAR 0x08 /* linear stereo */
1079 #define TDA8425_S1_STEREO_PSEUDO 0x10 /* pseudo stereo */
1080 #define TDA8425_S1_STEREO_MONO 0x00 /* forced mono */
1081 #define TDA8425_S1_ML 0x06 /* language selector */
1082 #define TDA8425_S1_ML_SOUND_A 0x02 /* sound a */
1083 #define TDA8425_S1_ML_SOUND_B 0x04 /* sound b */
1084 #define TDA8425_S1_ML_STEREO 0x06 /* stereo */
1085 #define TDA8425_S1_IS 0x01 /* channel selector */
1088 static int tda8425_shift10(int val
) { return (val
>> 10) | 0xc0; }
1089 static int tda8425_shift12(int val
) { return (val
>> 12) | 0xf0; }
1091 static int tda8425_initialize(struct CHIPSTATE
*chip
)
1093 struct CHIPDESC
*desc
= chiplist
+ chip
->type
;
1094 int inputmap
[4] = { /* tuner */ TDA8425_S1_CH2
, /* radio */ TDA8425_S1_CH1
,
1095 /* extern */ TDA8425_S1_CH1
, /* intern */ TDA8425_S1_OFF
};
1097 if (chip
->c
->adapter
->id
== I2C_HW_B_RIVA
) {
1098 memcpy (desc
->inputmap
, inputmap
, sizeof (inputmap
));
1103 static void tda8425_setmode(struct CHIPSTATE
*chip
, int mode
)
1105 int s1
= chip
->shadow
.bytes
[TDA8425_S1
+1] & 0xe1;
1107 if (mode
& V4L2_TUNER_MODE_LANG1
) {
1108 s1
|= TDA8425_S1_ML_SOUND_A
;
1109 s1
|= TDA8425_S1_STEREO_PSEUDO
;
1111 } else if (mode
& V4L2_TUNER_MODE_LANG2
) {
1112 s1
|= TDA8425_S1_ML_SOUND_B
;
1113 s1
|= TDA8425_S1_STEREO_PSEUDO
;
1116 s1
|= TDA8425_S1_ML_STEREO
;
1118 if (mode
& V4L2_TUNER_MODE_MONO
)
1119 s1
|= TDA8425_S1_STEREO_MONO
;
1120 if (mode
& V4L2_TUNER_MODE_STEREO
)
1121 s1
|= TDA8425_S1_STEREO_SPATIAL
;
1123 chip_write(chip
,TDA8425_S1
,s1
);
1127 /* ---------------------------------------------------------------------- */
1128 /* audio chip descriptions - defines+functions for pic16c54 (PV951) */
1130 /* the registers of 16C54, I2C sub address. */
1131 #define PIC16C54_REG_KEY_CODE 0x01 /* Not use. */
1132 #define PIC16C54_REG_MISC 0x02
1134 /* bit definition of the RESET register, I2C data. */
1135 #define PIC16C54_MISC_RESET_REMOTE_CTL 0x01 /* bit 0, Reset to receive the key */
1136 /* code of remote controller */
1137 #define PIC16C54_MISC_MTS_MAIN 0x02 /* bit 1 */
1138 #define PIC16C54_MISC_MTS_SAP 0x04 /* bit 2 */
1139 #define PIC16C54_MISC_MTS_BOTH 0x08 /* bit 3 */
1140 #define PIC16C54_MISC_SND_MUTE 0x10 /* bit 4, Mute Audio(Line-in and Tuner) */
1141 #define PIC16C54_MISC_SND_NOTMUTE 0x20 /* bit 5 */
1142 #define PIC16C54_MISC_SWITCH_TUNER 0x40 /* bit 6 , Switch to Line-in */
1143 #define PIC16C54_MISC_SWITCH_LINE 0x80 /* bit 7 , Switch to Tuner */
1145 /* ---------------------------------------------------------------------- */
1146 /* audio chip descriptions - defines+functions for TA8874Z */
1148 /* write 1st byte */
1149 #define TA8874Z_LED_STE 0x80
1150 #define TA8874Z_LED_BIL 0x40
1151 #define TA8874Z_LED_EXT 0x20
1152 #define TA8874Z_MONO_SET 0x10
1153 #define TA8874Z_MUTE 0x08
1154 #define TA8874Z_F_MONO 0x04
1155 #define TA8874Z_MODE_SUB 0x02
1156 #define TA8874Z_MODE_MAIN 0x01
1158 /* write 2nd byte */
1159 /*#define TA8874Z_TI 0x80 */ /* test mode */
1160 #define TA8874Z_SEPARATION 0x3f
1161 #define TA8874Z_SEPARATION_DEFAULT 0x10
1164 #define TA8874Z_B1 0x80
1165 #define TA8874Z_B0 0x40
1166 #define TA8874Z_CHAG_FLAG 0x20
1174 static int ta8874z_getmode(struct CHIPSTATE
*chip
)
1178 val
= chip_read(chip
);
1179 mode
= V4L2_TUNER_MODE_MONO
;
1180 if (val
& TA8874Z_B1
){
1181 mode
|= V4L2_TUNER_MODE_LANG1
| V4L2_TUNER_MODE_LANG2
;
1182 }else if (!(val
& TA8874Z_B0
)){
1183 mode
|= V4L2_TUNER_MODE_STEREO
;
1185 /* v4l_dbg(1, debug, chip->c, "ta8874z_getmode(): raw chip read: 0x%02x, return: 0x%02x\n", val, mode); */
1189 static audiocmd ta8874z_stereo
= { 2, {0, TA8874Z_SEPARATION_DEFAULT
}};
1190 static audiocmd ta8874z_mono
= {2, { TA8874Z_MONO_SET
, TA8874Z_SEPARATION_DEFAULT
}};
1191 static audiocmd ta8874z_main
= {2, { 0, TA8874Z_SEPARATION_DEFAULT
}};
1192 static audiocmd ta8874z_sub
= {2, { TA8874Z_MODE_SUB
, TA8874Z_SEPARATION_DEFAULT
}};
1194 static void ta8874z_setmode(struct CHIPSTATE
*chip
, int mode
)
1198 v4l_dbg(1, debug
, chip
->c
, "ta8874z_setmode(): mode: 0x%02x\n", mode
);
1201 case V4L2_TUNER_MODE_MONO
:
1204 case V4L2_TUNER_MODE_STEREO
:
1205 t
= &ta8874z_stereo
;
1207 case V4L2_TUNER_MODE_LANG1
:
1210 case V4L2_TUNER_MODE_LANG2
:
1218 chip_cmd(chip
, "TA8874Z", t
);
1221 static int ta8874z_checkit(struct CHIPSTATE
*chip
)
1224 rc
= chip_read(chip
);
1225 return ((rc
& 0x1f) == 0x1f) ? 1 : 0;
1228 /* ---------------------------------------------------------------------- */
1229 /* audio chip descriptions - struct CHIPDESC */
1231 /* insmod options to enable/disable individual audio chips */
1232 static int tda8425
= 1;
1233 static int tda9840
= 1;
1234 static int tda9850
= 1;
1235 static int tda9855
= 1;
1236 static int tda9873
= 1;
1237 static int tda9874a
= 1;
1238 static int tea6300
= 0; /* address clash with msp34xx */
1239 static int tea6320
= 0; /* address clash with msp34xx */
1240 static int tea6420
= 1;
1241 static int pic16c54
= 1;
1242 static int ta8874z
= 0; /* address clash with tda9840 */
1244 module_param(tda8425
, int, 0444);
1245 module_param(tda9840
, int, 0444);
1246 module_param(tda9850
, int, 0444);
1247 module_param(tda9855
, int, 0444);
1248 module_param(tda9873
, int, 0444);
1249 module_param(tda9874a
, int, 0444);
1250 module_param(tea6300
, int, 0444);
1251 module_param(tea6320
, int, 0444);
1252 module_param(tea6420
, int, 0444);
1253 module_param(pic16c54
, int, 0444);
1254 module_param(ta8874z
, int, 0444);
1256 static struct CHIPDESC chiplist
[] = {
1259 .id
= I2C_DRIVERID_TDA9840
,
1260 .insmodopt
= &tda9840
,
1261 .addr_lo
= I2C_ADDR_TDA9840
>> 1,
1262 .addr_hi
= I2C_ADDR_TDA9840
>> 1,
1265 .checkit
= tda9840_checkit
,
1266 .getmode
= tda9840_getmode
,
1267 .setmode
= tda9840_setmode
,
1268 .checkmode
= generic_checkmode
,
1270 .init
= { 2, { TDA9840_TEST
, TDA9840_TEST_INT1SN
1271 /* ,TDA9840_SW, TDA9840_MONO */} }
1275 .id
= I2C_DRIVERID_TDA9873
,
1276 .checkit
= tda9873_checkit
,
1277 .insmodopt
= &tda9873
,
1278 .addr_lo
= I2C_ADDR_TDA985x_L
>> 1,
1279 .addr_hi
= I2C_ADDR_TDA985x_H
>> 1,
1281 .flags
= CHIP_HAS_INPUTSEL
,
1283 .getmode
= tda9873_getmode
,
1284 .setmode
= tda9873_setmode
,
1285 .checkmode
= generic_checkmode
,
1287 .init
= { 4, { TDA9873_SW
, 0xa4, 0x06, 0x03 } },
1288 .inputreg
= TDA9873_SW
,
1289 .inputmute
= TDA9873_MUTE
| TDA9873_AUTOMUTE
,
1290 .inputmap
= {0xa0, 0xa2, 0xa0, 0xa0},
1291 .inputmask
= TDA9873_INP_MASK
|TDA9873_MUTE
|TDA9873_AUTOMUTE
,
1295 .name
= "tda9874h/a",
1296 .id
= I2C_DRIVERID_TDA9874
,
1297 .checkit
= tda9874a_checkit
,
1298 .initialize
= tda9874a_initialize
,
1299 .insmodopt
= &tda9874a
,
1300 .addr_lo
= I2C_ADDR_TDA9874
>> 1,
1301 .addr_hi
= I2C_ADDR_TDA9874
>> 1,
1303 .getmode
= tda9874a_getmode
,
1304 .setmode
= tda9874a_setmode
,
1305 .checkmode
= generic_checkmode
,
1309 .id
= I2C_DRIVERID_TDA9850
,
1310 .insmodopt
= &tda9850
,
1311 .addr_lo
= I2C_ADDR_TDA985x_L
>> 1,
1312 .addr_hi
= I2C_ADDR_TDA985x_H
>> 1,
1315 .getmode
= tda985x_getmode
,
1316 .setmode
= tda985x_setmode
,
1318 .init
= { 8, { TDA9850_C4
, 0x08, 0x08, TDA985x_STEREO
, 0x07, 0x10, 0x10, 0x03 } }
1322 .id
= I2C_DRIVERID_TDA9855
,
1323 .insmodopt
= &tda9855
,
1324 .addr_lo
= I2C_ADDR_TDA985x_L
>> 1,
1325 .addr_hi
= I2C_ADDR_TDA985x_H
>> 1,
1327 .flags
= CHIP_HAS_VOLUME
| CHIP_HAS_BASSTREBLE
,
1329 .leftreg
= TDA9855_VL
,
1330 .rightreg
= TDA9855_VR
,
1331 .bassreg
= TDA9855_BA
,
1332 .treblereg
= TDA9855_TR
,
1333 .volfunc
= tda9855_volume
,
1334 .bassfunc
= tda9855_bass
,
1335 .treblefunc
= tda9855_treble
,
1337 .getmode
= tda985x_getmode
,
1338 .setmode
= tda985x_setmode
,
1340 .init
= { 12, { 0, 0x6f, 0x6f, 0x0e, 0x07<<1, 0x8<<2,
1341 TDA9855_MUTE
| TDA9855_AVL
| TDA9855_LOUD
| TDA9855_INT
,
1342 TDA985x_STEREO
| TDA9855_LINEAR
| TDA9855_TZCM
| TDA9855_VZCM
,
1343 0x07, 0x10, 0x10, 0x03 }}
1347 .id
= I2C_DRIVERID_TEA6300
,
1348 .insmodopt
= &tea6300
,
1349 .addr_lo
= I2C_ADDR_TEA6300
>> 1,
1350 .addr_hi
= I2C_ADDR_TEA6300
>> 1,
1352 .flags
= CHIP_HAS_VOLUME
| CHIP_HAS_BASSTREBLE
| CHIP_HAS_INPUTSEL
,
1354 .leftreg
= TEA6300_VR
,
1355 .rightreg
= TEA6300_VL
,
1356 .bassreg
= TEA6300_BA
,
1357 .treblereg
= TEA6300_TR
,
1358 .volfunc
= tea6300_shift10
,
1359 .bassfunc
= tea6300_shift12
,
1360 .treblefunc
= tea6300_shift12
,
1362 .inputreg
= TEA6300_S
,
1363 .inputmap
= { TEA6300_S_SA
, TEA6300_S_SB
, TEA6300_S_SC
},
1364 .inputmute
= TEA6300_S_GMU
,
1368 .id
= I2C_DRIVERID_TEA6300
,
1369 .initialize
= tea6320_initialize
,
1370 .insmodopt
= &tea6320
,
1371 .addr_lo
= I2C_ADDR_TEA6300
>> 1,
1372 .addr_hi
= I2C_ADDR_TEA6300
>> 1,
1374 .flags
= CHIP_HAS_VOLUME
| CHIP_HAS_BASSTREBLE
| CHIP_HAS_INPUTSEL
,
1376 .leftreg
= TEA6320_V
,
1377 .rightreg
= TEA6320_V
,
1378 .bassreg
= TEA6320_BA
,
1379 .treblereg
= TEA6320_TR
,
1380 .volfunc
= tea6320_volume
,
1381 .bassfunc
= tea6320_shift11
,
1382 .treblefunc
= tea6320_shift11
,
1384 .inputreg
= TEA6320_S
,
1385 .inputmap
= { TEA6320_S_SA
, TEA6420_S_SB
, TEA6300_S_SC
, TEA6320_S_SD
},
1386 .inputmute
= TEA6300_S_GMU
,
1390 .id
= I2C_DRIVERID_TEA6420
,
1391 .insmodopt
= &tea6420
,
1392 .addr_lo
= I2C_ADDR_TEA6420
>> 1,
1393 .addr_hi
= I2C_ADDR_TEA6420
>> 1,
1395 .flags
= CHIP_HAS_INPUTSEL
,
1398 .inputmap
= { TEA6420_S_SA
, TEA6420_S_SB
, TEA6420_S_SC
},
1399 .inputmute
= TEA6300_S_GMU
,
1403 .id
= I2C_DRIVERID_TDA8425
,
1404 .insmodopt
= &tda8425
,
1405 .addr_lo
= I2C_ADDR_TDA8425
>> 1,
1406 .addr_hi
= I2C_ADDR_TDA8425
>> 1,
1408 .flags
= CHIP_HAS_VOLUME
| CHIP_HAS_BASSTREBLE
| CHIP_HAS_INPUTSEL
,
1410 .leftreg
= TDA8425_VL
,
1411 .rightreg
= TDA8425_VR
,
1412 .bassreg
= TDA8425_BA
,
1413 .treblereg
= TDA8425_TR
,
1414 .volfunc
= tda8425_shift10
,
1415 .bassfunc
= tda8425_shift12
,
1416 .treblefunc
= tda8425_shift12
,
1418 .inputreg
= TDA8425_S1
,
1419 .inputmap
= { TDA8425_S1_CH1
, TDA8425_S1_CH1
, TDA8425_S1_CH1
},
1420 .inputmute
= TDA8425_S1_OFF
,
1422 .setmode
= tda8425_setmode
,
1423 .initialize
= tda8425_initialize
,
1426 .name
= "pic16c54 (PV951)",
1427 .id
= I2C_DRIVERID_PIC16C54_PV9
,
1428 .insmodopt
= &pic16c54
,
1429 .addr_lo
= I2C_ADDR_PIC16C54
>> 1,
1430 .addr_hi
= I2C_ADDR_PIC16C54
>> 1,
1432 .flags
= CHIP_HAS_INPUTSEL
,
1434 .inputreg
= PIC16C54_REG_MISC
,
1435 .inputmap
= {PIC16C54_MISC_SND_NOTMUTE
|PIC16C54_MISC_SWITCH_TUNER
,
1436 PIC16C54_MISC_SND_NOTMUTE
|PIC16C54_MISC_SWITCH_LINE
,
1437 PIC16C54_MISC_SND_NOTMUTE
|PIC16C54_MISC_SWITCH_LINE
,
1438 PIC16C54_MISC_SND_MUTE
},
1439 .inputmute
= PIC16C54_MISC_SND_MUTE
,
1444 /*.id = I2C_DRIVERID_TA8874Z, */
1445 .checkit
= ta8874z_checkit
,
1446 .insmodopt
= &ta8874z
,
1447 .addr_lo
= I2C_ADDR_TDA9840
>> 1,
1448 .addr_hi
= I2C_ADDR_TDA9840
>> 1,
1451 .getmode
= ta8874z_getmode
,
1452 .setmode
= ta8874z_setmode
,
1453 .checkmode
= generic_checkmode
,
1455 .init
= {2, { TA8874Z_MONO_SET
, TA8874Z_SEPARATION_DEFAULT
}},
1457 { .name
= NULL
} /* EOF */
1461 /* ---------------------------------------------------------------------- */
1462 /* i2c registration */
1464 static int chip_probe(struct i2c_client
*client
)
1466 struct CHIPSTATE
*chip
;
1467 struct CHIPDESC
*desc
;
1470 printk(KERN_INFO
"tvaudio: TV audio decoder + audio/video mux driver\n");
1471 printk(KERN_INFO
"tvaudio: known chips: ");
1472 for (desc
= chiplist
; desc
->name
!= NULL
; desc
++)
1473 printk("%s%s", (desc
== chiplist
) ? "" : ", ", desc
->name
);
1477 chip
= kzalloc(sizeof(*chip
),GFP_KERNEL
);
1481 i2c_set_clientdata(client
, chip
);
1483 /* find description for the chip */
1484 v4l_dbg(1, debug
, client
, "chip found @ 0x%x\n", client
->addr
<<1);
1485 for (desc
= chiplist
; desc
->name
!= NULL
; desc
++) {
1486 if (0 == *(desc
->insmodopt
))
1488 if (client
->addr
< desc
->addr_lo
||
1489 client
->addr
> desc
->addr_hi
)
1491 if (desc
->checkit
&& !desc
->checkit(chip
))
1495 if (desc
->name
== NULL
) {
1496 v4l_dbg(1, debug
, client
, "no matching chip description found\n");
1499 v4l_info(client
, "%s found @ 0x%x (%s)\n", desc
->name
, client
->addr
<<1, client
->adapter
->name
);
1501 v4l_dbg(1, debug
, client
, "matches:%s%s%s.\n",
1502 (desc
->flags
& CHIP_HAS_VOLUME
) ? " volume" : "",
1503 (desc
->flags
& CHIP_HAS_BASSTREBLE
) ? " bass/treble" : "",
1504 (desc
->flags
& CHIP_HAS_INPUTSEL
) ? " audiomux" : "");
1507 /* fill required data structures */
1508 strcpy(client
->name
, desc
->name
);
1509 chip
->type
= desc
-chiplist
;
1510 chip
->shadow
.count
= desc
->registers
+1;
1511 chip
->prevmode
= -1;
1512 chip
->audmode
= V4L2_TUNER_MODE_LANG1
;
1514 /* initialization */
1515 if (desc
->initialize
!= NULL
)
1516 desc
->initialize(chip
);
1518 chip_cmd(chip
,"init",&desc
->init
);
1520 if (desc
->flags
& CHIP_HAS_VOLUME
) {
1521 chip
->left
= desc
->leftinit
? desc
->leftinit
: 65535;
1522 chip
->right
= desc
->rightinit
? desc
->rightinit
: 65535;
1523 chip_write(chip
,desc
->leftreg
,desc
->volfunc(chip
->left
));
1524 chip_write(chip
,desc
->rightreg
,desc
->volfunc(chip
->right
));
1526 if (desc
->flags
& CHIP_HAS_BASSTREBLE
) {
1527 chip
->treble
= desc
->trebleinit
? desc
->trebleinit
: 32768;
1528 chip
->bass
= desc
->bassinit
? desc
->bassinit
: 32768;
1529 chip_write(chip
,desc
->bassreg
,desc
->bassfunc(chip
->bass
));
1530 chip_write(chip
,desc
->treblereg
,desc
->treblefunc(chip
->treble
));
1533 chip
->thread
= NULL
;
1534 if (desc
->checkmode
) {
1535 /* start async thread */
1536 init_timer(&chip
->wt
);
1537 chip
->wt
.function
= chip_thread_wake
;
1538 chip
->wt
.data
= (unsigned long)chip
;
1539 chip
->thread
= kthread_run(chip_thread
, chip
, chip
->c
->name
);
1540 if (IS_ERR(chip
->thread
)) {
1541 v4l_warn(chip
->c
, "%s: failed to create kthread\n",
1543 chip
->thread
= NULL
;
1549 static int chip_remove(struct i2c_client
*client
)
1551 struct CHIPSTATE
*chip
= i2c_get_clientdata(client
);
1553 del_timer_sync(&chip
->wt
);
1555 /* shutdown async thread */
1556 kthread_stop(chip
->thread
);
1557 chip
->thread
= NULL
;
1564 static int tvaudio_get_ctrl(struct CHIPSTATE
*chip
,
1565 struct v4l2_control
*ctrl
)
1567 struct CHIPDESC
*desc
= chiplist
+ chip
->type
;
1570 case V4L2_CID_AUDIO_MUTE
:
1571 ctrl
->value
=chip
->muted
;
1573 case V4L2_CID_AUDIO_VOLUME
:
1574 if (!desc
->flags
& CHIP_HAS_VOLUME
)
1576 ctrl
->value
= max(chip
->left
,chip
->right
);
1578 case V4L2_CID_AUDIO_BALANCE
:
1581 if (!desc
->flags
& CHIP_HAS_VOLUME
)
1583 volume
= max(chip
->left
,chip
->right
);
1585 ctrl
->value
=(32768*min(chip
->left
,chip
->right
))/volume
;
1590 case V4L2_CID_AUDIO_BASS
:
1591 if (desc
->flags
& CHIP_HAS_BASSTREBLE
)
1593 ctrl
->value
= chip
->bass
;
1595 case V4L2_CID_AUDIO_TREBLE
:
1596 if (desc
->flags
& CHIP_HAS_BASSTREBLE
)
1598 ctrl
->value
= chip
->treble
;
1604 static int tvaudio_set_ctrl(struct CHIPSTATE
*chip
,
1605 struct v4l2_control
*ctrl
)
1607 struct CHIPDESC
*desc
= chiplist
+ chip
->type
;
1610 case V4L2_CID_AUDIO_MUTE
:
1611 if (ctrl
->value
< 0 || ctrl
->value
>= 2)
1613 chip
->muted
= ctrl
->value
;
1615 chip_write_masked(chip
,desc
->inputreg
,desc
->inputmute
,desc
->inputmask
);
1617 chip_write_masked(chip
,desc
->inputreg
,
1618 desc
->inputmap
[chip
->input
],desc
->inputmask
);
1620 case V4L2_CID_AUDIO_VOLUME
:
1624 if (!desc
->flags
& CHIP_HAS_VOLUME
)
1627 volume
= max(chip
->left
,chip
->right
);
1629 balance
=(32768*min(chip
->left
,chip
->right
))/volume
;
1634 chip
->left
= (min(65536 - balance
,32768) * volume
) / 32768;
1635 chip
->right
= (min(balance
,volume
*(__u16
)32768)) / 32768;
1637 chip_write(chip
,desc
->leftreg
,desc
->volfunc(chip
->left
));
1638 chip_write(chip
,desc
->rightreg
,desc
->volfunc(chip
->right
));
1642 case V4L2_CID_AUDIO_BALANCE
:
1644 int volume
, balance
;
1645 if (!desc
->flags
& CHIP_HAS_VOLUME
)
1648 volume
= max(chip
->left
,chip
->right
);
1649 balance
= ctrl
->value
;
1651 chip_write(chip
,desc
->leftreg
,desc
->volfunc(chip
->left
));
1652 chip_write(chip
,desc
->rightreg
,desc
->volfunc(chip
->right
));
1656 case V4L2_CID_AUDIO_BASS
:
1657 if (desc
->flags
& CHIP_HAS_BASSTREBLE
)
1659 chip
->bass
= ctrl
->value
;
1660 chip_write(chip
,desc
->bassreg
,desc
->bassfunc(chip
->bass
));
1663 case V4L2_CID_AUDIO_TREBLE
:
1664 if (desc
->flags
& CHIP_HAS_BASSTREBLE
)
1667 chip
->treble
= ctrl
->value
;
1668 chip_write(chip
,desc
->treblereg
,desc
->treblefunc(chip
->treble
));
1676 /* ---------------------------------------------------------------------- */
1677 /* video4linux interface */
1679 static int chip_command(struct i2c_client
*client
,
1680 unsigned int cmd
, void *arg
)
1682 struct CHIPSTATE
*chip
= i2c_get_clientdata(client
);
1683 struct CHIPDESC
*desc
= chiplist
+ chip
->type
;
1685 v4l_dbg(1, debug
, chip
->c
, "%s: chip_command 0x%x\n", chip
->c
->name
, cmd
);
1688 case AUDC_SET_RADIO
:
1690 chip
->watch_stereo
= 0;
1691 /* del_timer(&chip->wt); */
1693 /* --- v4l ioctls --- */
1694 /* take care: bttv does userspace copying, we'll get a
1695 kernel pointer here... */
1696 case VIDIOC_QUERYCTRL
:
1698 struct v4l2_queryctrl
*qc
= arg
;
1701 case V4L2_CID_AUDIO_MUTE
:
1703 case V4L2_CID_AUDIO_VOLUME
:
1704 case V4L2_CID_AUDIO_BALANCE
:
1705 if (!desc
->flags
& CHIP_HAS_VOLUME
)
1708 case V4L2_CID_AUDIO_BASS
:
1709 case V4L2_CID_AUDIO_TREBLE
:
1710 if (desc
->flags
& CHIP_HAS_BASSTREBLE
)
1716 return v4l2_ctrl_query_fill_std(qc
);
1719 return tvaudio_set_ctrl(chip
, arg
);
1722 return tvaudio_get_ctrl(chip
, arg
);
1723 case VIDIOC_INT_G_AUDIO_ROUTING
:
1725 struct v4l2_routing
*rt
= arg
;
1727 rt
->input
= chip
->input
;
1731 case VIDIOC_INT_S_AUDIO_ROUTING
:
1733 struct v4l2_routing
*rt
= arg
;
1735 if (!(desc
->flags
& CHIP_HAS_INPUTSEL
) || rt
->input
>= 4)
1737 /* There are four inputs: tuner, radio, extern and intern. */
1738 chip
->input
= rt
->input
;
1741 chip_write_masked(chip
, desc
->inputreg
,
1742 desc
->inputmap
[chip
->input
], desc
->inputmask
);
1745 case VIDIOC_S_TUNER
:
1747 struct v4l2_tuner
*vt
= arg
;
1752 switch (vt
->audmode
) {
1753 case V4L2_TUNER_MODE_MONO
:
1754 case V4L2_TUNER_MODE_STEREO
:
1755 case V4L2_TUNER_MODE_LANG1
:
1756 case V4L2_TUNER_MODE_LANG2
:
1759 case V4L2_TUNER_MODE_LANG1_LANG2
:
1760 mode
= V4L2_TUNER_MODE_STEREO
;
1765 chip
->audmode
= vt
->audmode
;
1767 if (desc
->setmode
&& mode
) {
1768 chip
->watch_stereo
= 0;
1769 /* del_timer(&chip->wt); */
1771 desc
->setmode(chip
, mode
);
1775 case VIDIOC_G_TUNER
:
1777 struct v4l2_tuner
*vt
= arg
;
1778 int mode
= V4L2_TUNER_MODE_MONO
;
1782 vt
->audmode
= chip
->audmode
;
1784 vt
->capability
= V4L2_TUNER_CAP_STEREO
|
1785 V4L2_TUNER_CAP_LANG1
| V4L2_TUNER_CAP_LANG2
;
1788 mode
= desc
->getmode(chip
);
1790 if (mode
& V4L2_TUNER_MODE_MONO
)
1791 vt
->rxsubchans
|= V4L2_TUNER_SUB_MONO
;
1792 if (mode
& V4L2_TUNER_MODE_STEREO
)
1793 vt
->rxsubchans
|= V4L2_TUNER_SUB_STEREO
;
1794 /* Note: for SAP it should be mono/lang2 or stereo/lang2.
1795 When this module is converted fully to v4l2, then this
1796 should change for those chips that can detect SAP. */
1797 if (mode
& V4L2_TUNER_MODE_LANG1
)
1798 vt
->rxsubchans
= V4L2_TUNER_SUB_LANG1
|
1799 V4L2_TUNER_SUB_LANG2
;
1805 case VIDIOC_S_FREQUENCY
:
1806 chip
->mode
= 0; /* automatic */
1807 if (desc
->checkmode
) {
1808 desc
->setmode(chip
,V4L2_TUNER_MODE_MONO
);
1809 if (chip
->prevmode
!= V4L2_TUNER_MODE_MONO
)
1810 chip
->prevmode
= -1; /* reset previous mode */
1811 mod_timer(&chip
->wt
, jiffies
+msecs_to_jiffies(2000));
1812 /* the thread will call checkmode() later */
1816 case VIDIOC_G_CHIP_IDENT
:
1817 return v4l2_chip_ident_i2c_client(client
, arg
, V4L2_IDENT_TVAUDIO
, 0);
1822 static int chip_legacy_probe(struct i2c_adapter
*adap
)
1824 /* don't attach on saa7146 based cards,
1825 because dedicated drivers are used */
1826 if ((adap
->id
== I2C_HW_SAA7146
))
1828 if (adap
->class & I2C_CLASS_TV_ANALOG
)
1833 static struct v4l2_i2c_driver_data v4l2_i2c_data
= {
1835 .driverid
= I2C_DRIVERID_TVAUDIO
,
1836 .command
= chip_command
,
1837 .probe
= chip_probe
,
1838 .remove
= chip_remove
,
1839 .legacy_probe
= chip_legacy_probe
,