1 #ifndef __ASM_MACH_APIC_H
2 #define __ASM_MACH_APIC_H
4 #include <linux/config.h>
7 #define esr_disable (1)
8 #define NO_BALANCE_IRQ (0)
10 /* In clustered mode, the high nibble of APIC ID is a cluster number.
11 * The low nibble is a 4-bit bitmap. */
12 #define XAPIC_DEST_CPUS_SHIFT 4
13 #define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
14 #define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
16 #define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
18 static inline cpumask_t
target_cpus(void)
20 /* CPU_MASK_ALL (0xff) has undefined behaviour with
21 * dest_LowestPrio mode logical clustered apic interrupt routing
22 * Just start on cpu 0. IRQ balancing will spread load
24 return cpumask_of_cpu(0);
26 #define TARGET_CPUS (target_cpus())
28 #define INT_DELIVERY_MODE (dest_LowestPrio)
29 #define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */
31 static inline unsigned long check_apicid_used(physid_mask_t bitmap
, int apicid
)
36 /* we don't use the phys_cpu_present_map to indicate apicid presence */
37 static inline unsigned long check_apicid_present(int bit
)
42 #define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
44 extern u8 bios_cpu_apicid
[];
45 extern u8 cpu_2_logical_apicid
[];
47 static inline void init_apic_ldr(void)
49 unsigned long val
, id
;
52 u8 my_id
= (u8
)hard_smp_processor_id();
53 u8 my_cluster
= (u8
)apicid_cluster(my_id
);
55 /* Create logical APIC IDs by counting CPUs already in cluster. */
56 for (count
= 0, i
= NR_CPUS
; --i
>= 0; ) {
57 lid
= cpu_2_logical_apicid
[i
];
58 if (lid
!= BAD_APICID
&& apicid_cluster(lid
) == my_cluster
)
61 /* We only have a 4 wide bitmap in cluster mode. If a deranged
62 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
63 BUG_ON(count
>= XAPIC_DEST_CPUS_SHIFT
);
64 id
= my_cluster
| (1UL << count
);
65 apic_write_around(APIC_DFR
, APIC_DFR_VALUE
);
66 val
= apic_read(APIC_LDR
) & ~APIC_LDR_MASK
;
67 val
|= SET_APIC_LOGICAL_ID(id
);
68 apic_write_around(APIC_LDR
, val
);
71 static inline int multi_timer_check(int apic
, int irq
)
76 static inline int apic_id_registered(void)
81 static inline void clustered_apic_check(void)
83 printk("Enabling APIC mode: Summit. Using %d I/O APICs\n",
87 static inline int apicid_to_node(int logical_apicid
)
89 return logical_apicid
>> 5; /* 2 clusterids per CEC */
92 /* Mapping from cpu number to logical apicid */
93 static inline int cpu_to_logical_apicid(int cpu
)
97 return (int)cpu_2_logical_apicid
[cpu
];
100 static inline int cpu_present_to_apicid(int mps_cpu
)
102 if (mps_cpu
< NR_CPUS
)
103 return (int)bios_cpu_apicid
[mps_cpu
];
108 static inline physid_mask_t
ioapic_phys_id_map(physid_mask_t phys_id_map
)
110 /* For clustered we don't have a good way to do this yet - hack */
111 return physids_promote(0x0F);
114 static inline physid_mask_t
apicid_to_cpu_present(int apicid
)
116 return physid_mask_of_physid(0);
119 static inline int mpc_apic_id(struct mpc_config_processor
*m
,
120 struct mpc_config_translation
*translation_record
)
122 printk("Processor #%d %ld:%ld APIC version %d\n",
124 (m
->mpc_cpufeature
& CPU_FAMILY_MASK
) >> 8,
125 (m
->mpc_cpufeature
& CPU_MODEL_MASK
) >> 4,
127 return (m
->mpc_apicid
);
130 static inline void setup_portio_remap(void)
134 static inline int check_phys_apicid_present(int boot_cpu_physical_apicid
)
139 static inline void enable_apic_mode(void)
143 static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask
)
150 num_bits_set
= cpus_weight(cpumask
);
151 /* Return id to all */
152 if (num_bits_set
== NR_CPUS
)
155 * The cpus in the mask must all be on the apic cluster. If are not
156 * on the same apicid cluster return default value of TARGET_CPUS.
158 cpu
= first_cpu(cpumask
);
159 apicid
= cpu_to_logical_apicid(cpu
);
160 while (cpus_found
< num_bits_set
) {
161 if (cpu_isset(cpu
, cpumask
)) {
162 int new_apicid
= cpu_to_logical_apicid(cpu
);
163 if (apicid_cluster(apicid
) !=
164 apicid_cluster(new_apicid
)){
165 printk ("%s: Not a valid mask!\n",__FUNCTION__
);
168 apicid
= apicid
| new_apicid
;
176 /* cpuid returns the value latched in the HW at reset, not the APIC ID
177 * register's value. For any box whose BIOS changes APIC IDs, like
178 * clustered APIC systems, we must use hard_smp_processor_id.
180 * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
182 static inline u32
phys_pkg_id(u32 cpuid_apic
, int index_msb
)
184 return hard_smp_processor_id() >> index_msb
;
187 #endif /* __ASM_MACH_APIC_H */