[PATCH] w1: Make w1 connector notifications depend on connector.
[linux-2.6/verdex.git] / drivers / sbus / char / display7seg.c
blobc3a51d1fae5de6df86a7270f44540e3cabd07fcb
1 /* $Id: display7seg.c,v 1.6 2002/01/08 16:00:16 davem Exp $
3 * display7seg - Driver implementation for the 7-segment display
4 * present on Sun Microsystems CP1400 and CP1500
6 * Copyright (c) 2000 Eric Brower (ebrower@usa.net)
8 */
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/fs.h>
13 #include <linux/errno.h>
14 #include <linux/major.h>
15 #include <linux/init.h>
16 #include <linux/miscdevice.h>
17 #include <linux/ioport.h> /* request_region */
18 #include <linux/smp_lock.h>
19 #include <asm/atomic.h>
20 #include <asm/ebus.h> /* EBus device */
21 #include <asm/oplib.h> /* OpenProm Library */
22 #include <asm/uaccess.h> /* put_/get_user */
24 #include <asm/display7seg.h>
26 #define D7S_MINOR 193
27 #define D7S_OBPNAME "display7seg"
28 #define D7S_DEVNAME "d7s"
30 static int sol_compat = 0; /* Solaris compatibility mode */
32 #ifdef MODULE
34 /* Solaris compatibility flag -
35 * The Solaris implementation omits support for several
36 * documented driver features (ref Sun doc 806-0180-03).
37 * By default, this module supports the documented driver
38 * abilities, rather than the Solaris implementation:
40 * 1) Device ALWAYS reverts to OBP-specified FLIPPED mode
41 * upon closure of device or module unload.
42 * 2) Device ioctls D7SIOCRD/D7SIOCWR honor toggling of
43 * FLIP bit
45 * If you wish the device to operate as under Solaris,
46 * omitting above features, set this parameter to non-zero.
48 module_param
49 (sol_compat, int, 0);
50 MODULE_PARM_DESC
51 (sol_compat,
52 "Disables documented functionality omitted from Solaris driver");
54 MODULE_AUTHOR
55 ("Eric Brower <ebrower@usa.net>");
56 MODULE_DESCRIPTION
57 ("7-Segment Display driver for Sun Microsystems CP1400/1500");
58 MODULE_LICENSE("GPL");
59 MODULE_SUPPORTED_DEVICE
60 ("d7s");
61 #endif /* ifdef MODULE */
64 * Register block address- see header for details
65 * -----------------------------------------
66 * | DP | ALARM | FLIP | 4 | 3 | 2 | 1 | 0 |
67 * -----------------------------------------
69 * DP - Toggles decimal point on/off
70 * ALARM - Toggles "Alarm" LED green/red
71 * FLIP - Inverts display for upside-down mounted board
72 * bits 0-4 - 7-segment display contents
74 static void __iomem* d7s_regs;
76 static inline void d7s_free(void)
78 iounmap(d7s_regs);
81 static inline int d7s_obpflipped(void)
83 int opt_node;
85 opt_node = prom_getchild(prom_root_node);
86 opt_node = prom_searchsiblings(opt_node, "options");
87 return ((-1 != prom_getintdefault(opt_node, "d7s-flipped?", -1)) ? 0 : 1);
90 static atomic_t d7s_users = ATOMIC_INIT(0);
92 static int d7s_open(struct inode *inode, struct file *f)
94 if (D7S_MINOR != iminor(inode))
95 return -ENODEV;
96 atomic_inc(&d7s_users);
97 return 0;
100 static int d7s_release(struct inode *inode, struct file *f)
102 /* Reset flipped state to OBP default only if
103 * no other users have the device open and we
104 * are not operating in solaris-compat mode
106 if (atomic_dec_and_test(&d7s_users) && !sol_compat) {
107 int regval = 0;
109 regval = readb(d7s_regs);
110 (0 == d7s_obpflipped()) ?
111 writeb(regval |= D7S_FLIP, d7s_regs):
112 writeb(regval &= ~D7S_FLIP, d7s_regs);
115 return 0;
118 static long d7s_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
120 __u8 regs = readb(d7s_regs);
121 __u8 ireg = 0;
122 int error = 0;
124 if (D7S_MINOR != iminor(file->f_dentry->d_inode))
125 return -ENODEV;
127 lock_kernel();
128 switch (cmd) {
129 case D7SIOCWR:
130 /* assign device register values
131 * we mask-out D7S_FLIP if in sol_compat mode
133 if (get_user(ireg, (int __user *) arg)) {
134 error = -EFAULT;
135 break;
137 if (0 != sol_compat) {
138 (regs & D7S_FLIP) ?
139 (ireg |= D7S_FLIP) : (ireg &= ~D7S_FLIP);
141 writeb(ireg, d7s_regs);
142 break;
144 case D7SIOCRD:
145 /* retrieve device register values
146 * NOTE: Solaris implementation returns D7S_FLIP bit
147 * as toggled by user, even though it does not honor it.
148 * This driver will not misinform you about the state
149 * of your hardware while in sol_compat mode
151 if (put_user(regs, (int __user *) arg)) {
152 error = -EFAULT;
153 break;
155 break;
157 case D7SIOCTM:
158 /* toggle device mode-- flip display orientation */
159 (regs & D7S_FLIP) ?
160 (regs &= ~D7S_FLIP) : (regs |= D7S_FLIP);
161 writeb(regs, d7s_regs);
162 break;
164 unlock_kernel();
166 return error;
169 static struct file_operations d7s_fops = {
170 .owner = THIS_MODULE,
171 .unlocked_ioctl = d7s_ioctl,
172 .compat_ioctl = d7s_ioctl,
173 .open = d7s_open,
174 .release = d7s_release,
177 static struct miscdevice d7s_miscdev = { D7S_MINOR, D7S_DEVNAME, &d7s_fops };
179 static int __init d7s_init(void)
181 struct linux_ebus *ebus = NULL;
182 struct linux_ebus_device *edev = NULL;
183 int iTmp = 0, regs = 0;
185 for_each_ebus(ebus) {
186 for_each_ebusdev(edev, ebus) {
187 if (!strcmp(edev->prom_name, D7S_OBPNAME))
188 goto ebus_done;
192 ebus_done:
193 if(!edev) {
194 printk("%s: unable to locate device\n", D7S_DEVNAME);
195 return -ENODEV;
198 d7s_regs = ioremap(edev->resource[0].start, sizeof(__u8));
200 iTmp = misc_register(&d7s_miscdev);
201 if (0 != iTmp) {
202 printk("%s: unable to acquire miscdevice minor %i\n",
203 D7S_DEVNAME, D7S_MINOR);
204 iounmap(d7s_regs);
205 return iTmp;
208 /* OBP option "d7s-flipped?" is honored as default
209 * for the device, and reset default when detached
211 regs = readb(d7s_regs);
212 iTmp = d7s_obpflipped();
213 (0 == iTmp) ?
214 writeb(regs |= D7S_FLIP, d7s_regs):
215 writeb(regs &= ~D7S_FLIP, d7s_regs);
217 printk("%s: 7-Segment Display%s at 0x%lx %s\n",
218 D7S_DEVNAME,
219 (0 == iTmp) ? (" (FLIPPED)") : (""),
220 edev->resource[0].start,
221 (0 != sol_compat) ? ("in sol_compat mode") : (""));
223 return 0;
226 static void __exit d7s_cleanup(void)
228 int regs = readb(d7s_regs);
230 /* Honor OBP d7s-flipped? unless operating in solaris-compat mode */
231 if (0 == sol_compat) {
232 (0 == d7s_obpflipped()) ?
233 writeb(regs |= D7S_FLIP, d7s_regs):
234 writeb(regs &= ~D7S_FLIP, d7s_regs);
237 misc_deregister(&d7s_miscdev);
238 d7s_free();
241 module_init(d7s_init);
242 module_exit(d7s_cleanup);