?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[PATCH] w1: Make w1 connector notifications depend on connector.
[linux-2.6/verdex.git] / drivers / serial / pxa.c
blob77d4568ccc3a7fdc0811783e7a1bbf52e7e1d5b9
1 /*
2 * linux/drivers/serial/pxa.c
3 *
4 * Based on drivers/serial/8250.c by Russell King.
5 *
6 * Author: Nicolas Pitre
7 * Created: Feb 20, 2003
8 * Copyright: (C) 2003 Monta Vista Software, Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * Note 1: This driver is made separate from the already too overloaded
16 * 8250.c because it needs some kirks of its own and that'll make it
17 * easier to add DMA support.
18 *
19 * Note 2: I'm too sick of device allocation policies for serial ports.
20 * If someone else wants to request an "official" allocation of major/minor
21 * for this driver please be my guest. And don't forget that new hardware
22 * to come from Intel might have more than 3 or 4 of those UARTs. Let's
23 * hope for a better port registration and dynamic device allocation scheme
24 * with the serial core maintainer satisfaction to appear soon.
25 */
26
27 #include <linux/config.h>
28
29 #if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
30 #define SUPPORT_SYSRQ
31 #endif
32
33 #include <linux/module.h>
34 #include <linux/ioport.h>
35 #include <linux/init.h>
36 #include <linux/console.h>
37 #include <linux/sysrq.h>
38 #include <linux/serial_reg.h>
39 #include <linux/circ_buf.h>
40 #include <linux/delay.h>
41 #include <linux/interrupt.h>
42 #include <linux/platform_device.h>
43 #include <linux/tty.h>
44 #include <linux/tty_flip.h>
45 #include <linux/serial_core.h>
46
47 #include <asm/io.h>
48 #include <asm/hardware.h>
49 #include <asm/irq.h>
50 #include <asm/arch/pxa-regs.h>
51
52
53 struct uart_pxa_port {
54 struct uart_port port;
55 unsigned char ier;
56 unsigned char lcr;
57 unsigned char mcr;
58 unsigned int lsr_break_flag;
59 unsigned int cken;
60 char *name;
61 };
62
63 static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
64 {
65 offset <<= 2;
66 return readl(up->port.membase + offset);
67 }
68
69 static inline void serial_out(struct uart_pxa_port *up, int offset, int value)
70 {
71 offset <<= 2;
72 writel(value, up->port.membase + offset);
73 }
74
75 static void serial_pxa_enable_ms(struct uart_port *port)
76 {
77 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
78
79 up->ier |= UART_IER_MSI;
80 serial_out(up, UART_IER, up->ier);
81 }
82
83 static void serial_pxa_stop_tx(struct uart_port *port)
84 {
85 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
86
87 if (up->ier & UART_IER_THRI) {
88 up->ier &= ~UART_IER_THRI;
89 serial_out(up, UART_IER, up->ier);
90 }
91 }
92
93 static void serial_pxa_stop_rx(struct uart_port *port)
94 {
95 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
96
97 up->ier &= ~UART_IER_RLSI;
98 up->port.read_status_mask &= ~UART_LSR_DR;
99 serial_out(up, UART_IER, up->ier);
100 }
101
102 static inline void
103 receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs)
104 {
105 struct tty_struct *tty = up->port.info->tty;
106 unsigned int ch, flag;
107 int max_count = 256;
108
109 do {
110 ch = serial_in(up, UART_RX);
111 flag = TTY_NORMAL;
112 up->port.icount.rx++;
113
114 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
115 UART_LSR_FE | UART_LSR_OE))) {
116 /*
117 * For statistics only
118 */
119 if (*status & UART_LSR_BI) {
120 *status &= ~(UART_LSR_FE | UART_LSR_PE);
121 up->port.icount.brk++;
122 /*
123 * We do the SysRQ and SAK checking
124 * here because otherwise the break
125 * may get masked by ignore_status_mask
126 * or read_status_mask.
127 */
128 if (uart_handle_break(&up->port))
129 goto ignore_char;
130 } else if (*status & UART_LSR_PE)
131 up->port.icount.parity++;
132 else if (*status & UART_LSR_FE)
133 up->port.icount.frame++;
134 if (*status & UART_LSR_OE)
135 up->port.icount.overrun++;
136
137 /*
138 * Mask off conditions which should be ignored.
139 */
140 *status &= up->port.read_status_mask;
141
142 #ifdef CONFIG_SERIAL_PXA_CONSOLE
143 if (up->port.line == up->port.cons->index) {
144 /* Recover the break flag from console xmit */
145 *status |= up->lsr_break_flag;
146 up->lsr_break_flag = 0;
147 }
148 #endif
149 if (*status & UART_LSR_BI) {
150 flag = TTY_BREAK;
151 } else if (*status & UART_LSR_PE)
152 flag = TTY_PARITY;
153 else if (*status & UART_LSR_FE)
154 flag = TTY_FRAME;
155 }
156
157 if (uart_handle_sysrq_char(&up->port, ch, regs))
158 goto ignore_char;
159
160 uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
161
162 ignore_char:
163 *status = serial_in(up, UART_LSR);
164 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
165 tty_flip_buffer_push(tty);
166 }
167
168 static void transmit_chars(struct uart_pxa_port *up)
169 {
170 struct circ_buf *xmit = &up->port.info->xmit;
171 int count;
172
173 if (up->port.x_char) {
174 serial_out(up, UART_TX, up->port.x_char);
175 up->port.icount.tx++;
176 up->port.x_char = 0;
177 return;
178 }
179 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
180 serial_pxa_stop_tx(&up->port);
181 return;
182 }
183
184 count = up->port.fifosize / 2;
185 do {
186 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
187 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
188 up->port.icount.tx++;
189 if (uart_circ_empty(xmit))
190 break;
191 } while (--count > 0);
192
193 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
194 uart_write_wakeup(&up->port);
195
196
197 if (uart_circ_empty(xmit))
198 serial_pxa_stop_tx(&up->port);
199 }
200
201 static void serial_pxa_start_tx(struct uart_port *port)
202 {
203 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
204
205 if (!(up->ier & UART_IER_THRI)) {
206 up->ier |= UART_IER_THRI;
207 serial_out(up, UART_IER, up->ier);
208 }
209 }
210
211 static inline void check_modem_status(struct uart_pxa_port *up)
212 {
213 int status;
214
215 status = serial_in(up, UART_MSR);
216
217 if ((status & UART_MSR_ANY_DELTA) == 0)
218 return;
219
220 if (status & UART_MSR_TERI)
221 up->port.icount.rng++;
222 if (status & UART_MSR_DDSR)
223 up->port.icount.dsr++;
224 if (status & UART_MSR_DDCD)
225 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
226 if (status & UART_MSR_DCTS)
227 uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
228
229 wake_up_interruptible(&up->port.info->delta_msr_wait);
230 }
231
232 /*
233 * This handles the interrupt from one port.
234 */
235 static inline irqreturn_t
236 serial_pxa_irq(int irq, void *dev_id, struct pt_regs *regs)
237 {
238 struct uart_pxa_port *up = (struct uart_pxa_port *)dev_id;
239 unsigned int iir, lsr;
240
241 iir = serial_in(up, UART_IIR);
242 if (iir & UART_IIR_NO_INT)
243 return IRQ_NONE;
244 lsr = serial_in(up, UART_LSR);
245 if (lsr & UART_LSR_DR)
246 receive_chars(up, &lsr, regs);
247 check_modem_status(up);
248 if (lsr & UART_LSR_THRE)
249 transmit_chars(up);
250 return IRQ_HANDLED;
251 }
252
253 static unsigned int serial_pxa_tx_empty(struct uart_port *port)
254 {
255 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
256 unsigned long flags;
257 unsigned int ret;
258
259 spin_lock_irqsave(&up->port.lock, flags);
260 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
261 spin_unlock_irqrestore(&up->port.lock, flags);
262
263 return ret;
264 }
265
266 static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
267 {
268 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
269 unsigned char status;
270 unsigned int ret;
271
272 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
273 status = serial_in(up, UART_MSR);
274
275 ret = 0;
276 if (status & UART_MSR_DCD)
277 ret |= TIOCM_CAR;
278 if (status & UART_MSR_RI)
279 ret |= TIOCM_RNG;
280 if (status & UART_MSR_DSR)
281 ret |= TIOCM_DSR;
282 if (status & UART_MSR_CTS)
283 ret |= TIOCM_CTS;
284 return ret;
285 }
286
287 static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl)
288 {
289 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
290 unsigned char mcr = 0;
291
292 if (mctrl & TIOCM_RTS)
293 mcr |= UART_MCR_RTS;
294 if (mctrl & TIOCM_DTR)
295 mcr |= UART_MCR_DTR;
296 if (mctrl & TIOCM_OUT1)
297 mcr |= UART_MCR_OUT1;
298 if (mctrl & TIOCM_OUT2)
299 mcr |= UART_MCR_OUT2;
300 if (mctrl & TIOCM_LOOP)
301 mcr |= UART_MCR_LOOP;
302
303 mcr |= up->mcr;
304
305 serial_out(up, UART_MCR, mcr);
306 }
307
308 static void serial_pxa_break_ctl(struct uart_port *port, int break_state)
309 {
310 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
311 unsigned long flags;
312
313 spin_lock_irqsave(&up->port.lock, flags);
314 if (break_state == -1)
315 up->lcr |= UART_LCR_SBC;
316 else
317 up->lcr &= ~UART_LCR_SBC;
318 serial_out(up, UART_LCR, up->lcr);
319 spin_unlock_irqrestore(&up->port.lock, flags);
320 }
321
322 #if 0
323 static void serial_pxa_dma_init(struct pxa_uart *up)
324 {
325 up->rxdma =
326 pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up);
327 if (up->rxdma < 0)
328 goto out;
329 up->txdma =
330 pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up);
331 if (up->txdma < 0)
332 goto err_txdma;
333 up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL);
334 if (!up->dmadesc)
335 goto err_alloc;
336
337 /* ... */
338 err_alloc:
339 pxa_free_dma(up->txdma);
340 err_rxdma:
341 pxa_free_dma(up->rxdma);
342 out:
343 return;
344 }
345 #endif
346
347 static int serial_pxa_startup(struct uart_port *port)
348 {
349 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
350 unsigned long flags;
351 int retval;
352
353 if (port->line == 3) /* HWUART */
354 up->mcr |= UART_MCR_AFE;
355 else
356 up->mcr = 0;
357
358 /*
359 * Allocate the IRQ
360 */
361 retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up);
362 if (retval)
363 return retval;
364
365 /*
366 * Clear the FIFO buffers and disable them.
367 * (they will be reenabled in set_termios())
368 */
369 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
370 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
371 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
372 serial_out(up, UART_FCR, 0);
373
374 /*
375 * Clear the interrupt registers.
376 */
377 (void) serial_in(up, UART_LSR);
378 (void) serial_in(up, UART_RX);
379 (void) serial_in(up, UART_IIR);
380 (void) serial_in(up, UART_MSR);
381
382 /*
383 * Now, initialize the UART
384 */
385 serial_out(up, UART_LCR, UART_LCR_WLEN8);
386
387 spin_lock_irqsave(&up->port.lock, flags);
388 up->port.mctrl |= TIOCM_OUT2;
389 serial_pxa_set_mctrl(&up->port, up->port.mctrl);
390 spin_unlock_irqrestore(&up->port.lock, flags);
391
392 /*
393 * Finally, enable interrupts. Note: Modem status interrupts
394 * are set via set_termios(), which will be occuring imminently
395 * anyway, so we don't enable them here.
396 */
397 up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
398 serial_out(up, UART_IER, up->ier);
399
400 /*
401 * And clear the interrupt registers again for luck.
402 */
403 (void) serial_in(up, UART_LSR);
404 (void) serial_in(up, UART_RX);
405 (void) serial_in(up, UART_IIR);
406 (void) serial_in(up, UART_MSR);
407
408 return 0;
409 }
410
411 static void serial_pxa_shutdown(struct uart_port *port)
412 {
413 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
414 unsigned long flags;
415
416 free_irq(up->port.irq, up);
417
418 /*
419 * Disable interrupts from this port
420 */
421 up->ier = 0;
422 serial_out(up, UART_IER, 0);
423
424 spin_lock_irqsave(&up->port.lock, flags);
425 up->port.mctrl &= ~TIOCM_OUT2;
426 serial_pxa_set_mctrl(&up->port, up->port.mctrl);
427 spin_unlock_irqrestore(&up->port.lock, flags);
428
429 /*
430 * Disable break condition and FIFOs
431 */
432 serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
433 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
434 UART_FCR_CLEAR_RCVR |
435 UART_FCR_CLEAR_XMIT);
436 serial_out(up, UART_FCR, 0);
437 }
438
439 static void
440 serial_pxa_set_termios(struct uart_port *port, struct termios *termios,
441 struct termios *old)
442 {
443 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
444 unsigned char cval, fcr = 0;
445 unsigned long flags;
446 unsigned int baud, quot;
447
448 switch (termios->c_cflag & CSIZE) {
449 case CS5:
450 cval = UART_LCR_WLEN5;
451 break;
452 case CS6:
453 cval = UART_LCR_WLEN6;
454 break;
455 case CS7:
456 cval = UART_LCR_WLEN7;
457 break;
458 default:
459 case CS8:
460 cval = UART_LCR_WLEN8;
461 break;
462 }
463
464 if (termios->c_cflag & CSTOPB)
465 cval |= UART_LCR_STOP;
466 if (termios->c_cflag & PARENB)
467 cval |= UART_LCR_PARITY;
468 if (!(termios->c_cflag & PARODD))
469 cval |= UART_LCR_EPAR;
470
471 /*
472 * Ask the core to calculate the divisor for us.
473 */
474 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
475 quot = uart_get_divisor(port, baud);
476
477 if ((up->port.uartclk / quot) < (2400 * 16))
478 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
479 else if ((up->port.uartclk / quot) < (230400 * 16))
480 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
481 else
482 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
483
484 /*
485 * Ok, we're now changing the port state. Do it with
486 * interrupts disabled.
487 */
488 spin_lock_irqsave(&up->port.lock, flags);
489
490 /*
491 * Ensure the port will be enabled.
492 * This is required especially for serial console.
493 */
494 up->ier |= IER_UUE;
495
496 /*
497 * Update the per-port timeout.
498 */
499 uart_update_timeout(port, termios->c_cflag, baud);
500
501 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
502 if (termios->c_iflag & INPCK)
503 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
504 if (termios->c_iflag & (BRKINT | PARMRK))
505 up->port.read_status_mask |= UART_LSR_BI;
506
507 /*
508 * Characters to ignore
509 */
510 up->port.ignore_status_mask = 0;
511 if (termios->c_iflag & IGNPAR)
512 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
513 if (termios->c_iflag & IGNBRK) {
514 up->port.ignore_status_mask |= UART_LSR_BI;
515 /*
516 * If we're ignoring parity and break indicators,
517 * ignore overruns too (for real raw support).
518 */
519 if (termios->c_iflag & IGNPAR)
520 up->port.ignore_status_mask |= UART_LSR_OE;
521 }
522
523 /*
524 * ignore all characters if CREAD is not set
525 */
526 if ((termios->c_cflag & CREAD) == 0)
527 up->port.ignore_status_mask |= UART_LSR_DR;
528
529 /*
530 * CTS flow control flag and modem status interrupts
531 */
532 up->ier &= ~UART_IER_MSI;
533 if (UART_ENABLE_MS(&up->port, termios->c_cflag))
534 up->ier |= UART_IER_MSI;
535
536 serial_out(up, UART_IER, up->ier);
537
538 serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
539 serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
540 serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
541 serial_out(up, UART_LCR, cval); /* reset DLAB */
542 up->lcr = cval; /* Save LCR */
543 serial_pxa_set_mctrl(&up->port, up->port.mctrl);
544 serial_out(up, UART_FCR, fcr);
545 spin_unlock_irqrestore(&up->port.lock, flags);
546 }
547
548 static void
549 serial_pxa_pm(struct uart_port *port, unsigned int state,
550 unsigned int oldstate)
551 {
552 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
553 pxa_set_cken(up->cken, !state);
554 if (!state)
555 udelay(1);
556 }
557
558 static void serial_pxa_release_port(struct uart_port *port)
559 {
560 }
561
562 static int serial_pxa_request_port(struct uart_port *port)
563 {
564 return 0;
565 }
566
567 static void serial_pxa_config_port(struct uart_port *port, int flags)
568 {
569 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
570 up->port.type = PORT_PXA;
571 }
572
573 static int
574 serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser)
575 {
576 /* we don't want the core code to modify any port params */
577 return -EINVAL;
578 }
579
580 static const char *
581 serial_pxa_type(struct uart_port *port)
582 {
583 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
584 return up->name;
585 }
586
587 #ifdef CONFIG_SERIAL_PXA_CONSOLE
588
589 static struct uart_pxa_port serial_pxa_ports[];
590 static struct uart_driver serial_pxa_reg;
591
592 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
593
594 /*
595 * Wait for transmitter & holding register to empty
596 */
597 static inline void wait_for_xmitr(struct uart_pxa_port *up)
598 {
599 unsigned int status, tmout = 10000;
600
601 /* Wait up to 10ms for the character(s) to be sent. */
602 do {
603 status = serial_in(up, UART_LSR);
604
605 if (status & UART_LSR_BI)
606 up->lsr_break_flag = UART_LSR_BI;
607
608 if (--tmout == 0)
609 break;
610 udelay(1);
611 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
612
613 /* Wait up to 1s for flow control if necessary */
614 if (up->port.flags & UPF_CONS_FLOW) {
615 tmout = 1000000;
616 while (--tmout &&
617 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
618 udelay(1);
619 }
620 }
621
622 static void serial_pxa_console_putchar(struct uart_port *port, int ch)
623 {
624 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
625
626 wait_for_xmitr(up);
627 serial_out(up, UART_TX, ch);
628 }
629
630 /*
631 * Print a string to the serial port trying not to disturb
632 * any possible real use of the port...
633 *
634 * The console_lock must be held when we get here.
635 */
636 static void
637 serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
638 {
639 struct uart_pxa_port *up = &serial_pxa_ports[co->index];
640 unsigned int ier;
641
642 /*
643 * First save the IER then disable the interrupts
644 */
645 ier = serial_in(up, UART_IER);
646 serial_out(up, UART_IER, UART_IER_UUE);
647
648 uart_console_write(&up->port, s, count, serial_pxa_console_putchar);
649
650 /*
651 * Finally, wait for transmitter to become empty
652 * and restore the IER
653 */
654 wait_for_xmitr(up);
655 serial_out(up, UART_IER, ier);
656 }
657
658 static int __init
659 serial_pxa_console_setup(struct console *co, char *options)
660 {
661 struct uart_pxa_port *up;
662 int baud = 9600;
663 int bits = 8;
664 int parity = 'n';
665 int flow = 'n';
666
667 if (co->index == -1 || co->index >= serial_pxa_reg.nr)
668 co->index = 0;
669 up = &serial_pxa_ports[co->index];
670
671 if (options)
672 uart_parse_options(options, &baud, &parity, &bits, &flow);
673
674 return uart_set_options(&up->port, co, baud, parity, bits, flow);
675 }
676
677 static struct console serial_pxa_console = {
678 .name = "ttyS",
679 .write = serial_pxa_console_write,
680 .device = uart_console_device,
681 .setup = serial_pxa_console_setup,
682 .flags = CON_PRINTBUFFER,
683 .index = -1,
684 .data = &serial_pxa_reg,
685 };
686
687 static int __init
688 serial_pxa_console_init(void)
689 {
690 register_console(&serial_pxa_console);
691 return 0;
692 }
693
694 console_initcall(serial_pxa_console_init);
695
696 #define PXA_CONSOLE &serial_pxa_console
697 #else
698 #define PXA_CONSOLE NULL
699 #endif
700
701 struct uart_ops serial_pxa_pops = {
702 .tx_empty = serial_pxa_tx_empty,
703 .set_mctrl = serial_pxa_set_mctrl,
704 .get_mctrl = serial_pxa_get_mctrl,
705 .stop_tx = serial_pxa_stop_tx,
706 .start_tx = serial_pxa_start_tx,
707 .stop_rx = serial_pxa_stop_rx,
708 .enable_ms = serial_pxa_enable_ms,
709 .break_ctl = serial_pxa_break_ctl,
710 .startup = serial_pxa_startup,
711 .shutdown = serial_pxa_shutdown,
712 .set_termios = serial_pxa_set_termios,
713 .pm = serial_pxa_pm,
714 .type = serial_pxa_type,
715 .release_port = serial_pxa_release_port,
716 .request_port = serial_pxa_request_port,
717 .config_port = serial_pxa_config_port,
718 .verify_port = serial_pxa_verify_port,
719 };
720
721 static struct uart_pxa_port serial_pxa_ports[] = {
722 { /* FFUART */
723 .name = "FFUART",
724 .cken = CKEN6_FFUART,
725 .port = {
726 .type = PORT_PXA,
727 .iotype = UPIO_MEM,
728 .membase = (void *)&FFUART,
729 .mapbase = __PREG(FFUART),
730 .irq = IRQ_FFUART,
731 .uartclk = 921600 * 16,
732 .fifosize = 64,
733 .ops = &serial_pxa_pops,
734 .line = 0,
735 },
736 }, { /* BTUART */
737 .name = "BTUART",
738 .cken = CKEN7_BTUART,
739 .port = {
740 .type = PORT_PXA,
741 .iotype = UPIO_MEM,
742 .membase = (void *)&BTUART,
743 .mapbase = __PREG(BTUART),
744 .irq = IRQ_BTUART,
745 .uartclk = 921600 * 16,
746 .fifosize = 64,
747 .ops = &serial_pxa_pops,
748 .line = 1,
749 },
750 }, { /* STUART */
751 .name = "STUART",
752 .cken = CKEN5_STUART,
753 .port = {
754 .type = PORT_PXA,
755 .iotype = UPIO_MEM,
756 .membase = (void *)&STUART,
757 .mapbase = __PREG(STUART),
758 .irq = IRQ_STUART,
759 .uartclk = 921600 * 16,
760 .fifosize = 64,
761 .ops = &serial_pxa_pops,
762 .line = 2,
763 },
764 }, { /* HWUART */
765 .name = "HWUART",
766 .cken = CKEN4_HWUART,
767 .port = {
768 .type = PORT_PXA,
769 .iotype = UPIO_MEM,
770 .membase = (void *)&HWUART,
771 .mapbase = __PREG(HWUART),
772 .irq = IRQ_HWUART,
773 .uartclk = 921600 * 16,
774 .fifosize = 64,
775 .ops = &serial_pxa_pops,
776 .line = 3,
777 },
778 }
779 };
780
781 static struct uart_driver serial_pxa_reg = {
782 .owner = THIS_MODULE,
783 .driver_name = "PXA serial",
784 .devfs_name = "tts/",
785 .dev_name = "ttyS",
786 .major = TTY_MAJOR,
787 .minor = 64,
788 .nr = ARRAY_SIZE(serial_pxa_ports),
789 .cons = PXA_CONSOLE,
790 };
791
792 static int serial_pxa_suspend(struct platform_device *dev, pm_message_t state)
793 {
794 struct uart_pxa_port *sport = platform_get_drvdata(dev);
795
796 if (sport)
797 uart_suspend_port(&serial_pxa_reg, &sport->port);
798
799 return 0;
800 }
801
802 static int serial_pxa_resume(struct platform_device *dev)
803 {
804 struct uart_pxa_port *sport = platform_get_drvdata(dev);
805
806 if (sport)
807 uart_resume_port(&serial_pxa_reg, &sport->port);
808
809 return 0;
810 }
811
812 static int serial_pxa_probe(struct platform_device *dev)
813 {
814 serial_pxa_ports[dev->id].port.dev = &dev->dev;
815 uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port);
816 platform_set_drvdata(dev, &serial_pxa_ports[dev->id]);
817 return 0;
818 }
819
820 static int serial_pxa_remove(struct platform_device *dev)
821 {
822 struct uart_pxa_port *sport = platform_get_drvdata(dev);
823
824 platform_set_drvdata(dev, NULL);
825
826 if (sport)
827 uart_remove_one_port(&serial_pxa_reg, &sport->port);
828
829 return 0;
830 }
831
832 static struct platform_driver serial_pxa_driver = {
833 .probe = serial_pxa_probe,
834 .remove = serial_pxa_remove,
835
836 .suspend = serial_pxa_suspend,
837 .resume = serial_pxa_resume,
838 .driver = {
839 .name = "pxa2xx-uart",
840 },
841 };
842
843 int __init serial_pxa_init(void)
844 {
845 int ret;
846
847 ret = uart_register_driver(&serial_pxa_reg);
848 if (ret != 0)
849 return ret;
850
851 ret = platform_driver_register(&serial_pxa_driver);
852 if (ret != 0)
853 uart_unregister_driver(&serial_pxa_reg);
854
855 return ret;
856 }
857
858 void __exit serial_pxa_exit(void)
859 {
860 platform_driver_unregister(&serial_pxa_driver);
861 uart_unregister_driver(&serial_pxa_reg);
862 }
863
864 module_init(serial_pxa_init);
865 module_exit(serial_pxa_exit);
866
867 MODULE_LICENSE("GPL");
868
Verdex Pro support