drivers/video/savage/savagefb-i2c.c

   1 /*
   2  * linux/drivers/video/savage/savagefb-i2c.c - S3 Savage DDC2
   3  *
   4  * Copyright 2004 Antonino A. Daplas <adaplas @pol.net>
   5  *
   6  * Based partly on rivafb-i2c.c
   7  *
   8  * This file is subject to the terms and conditions of the GNU General Public
   9  * License.  See the file COPYING in the main directory of this archive
  10  * for more details.
  11  */
  12
  13 #include <linux/config.h>
  14 #include <linux/module.h>
  15 #include <linux/kernel.h>
  16 #include <linux/sched.h>
  17 #include <linux/delay.h>
  18 #include <linux/pci.h>
  19 #include <linux/fb.h>
  20
  21 #include <asm/io.h>
  22 #include "savagefb.h"
  23
  24 #define SAVAGE_DDC      0x50
  25
  26 #define VGA_CR_IX       0x3d4
  27 #define VGA_CR_DATA     0x3d5
  28
  29 #define CR_SERIAL1      0xa0    /* I2C serial communications interface */
  30 #define MM_SERIAL1      0xff20
  31 #define CR_SERIAL2      0xb1    /* DDC2 monitor communications interface */
  32
  33 /* based on vt8365 documentation */
  34 #define PROSAVAGE_I2C_ENAB      0x10
  35 #define PROSAVAGE_I2C_SCL_OUT   0x01
  36 #define PROSAVAGE_I2C_SDA_OUT   0x02
  37 #define PROSAVAGE_I2C_SCL_IN    0x04
  38 #define PROSAVAGE_I2C_SDA_IN    0x08
  39
  40 #define SAVAGE4_I2C_ENAB        0x00000020
  41 #define SAVAGE4_I2C_SCL_OUT     0x00000001
  42 #define SAVAGE4_I2C_SDA_OUT     0x00000002
  43 #define SAVAGE4_I2C_SCL_IN      0x00000008
  44 #define SAVAGE4_I2C_SDA_IN      0x00000010
  45
  46 #define SET_CR_IX(base, val)    writeb((val), base + 0x8000 + VGA_CR_IX)
  47 #define SET_CR_DATA(base, val)  writeb((val), base + 0x8000 + VGA_CR_DATA)
  48 #define GET_CR_DATA(base)       readb(base + 0x8000 + VGA_CR_DATA)
  49
  50 static void savage4_gpio_setscl(void *data, int val)
  51 {
  52         struct savagefb_i2c_chan *chan = data;
  53         unsigned int r;
  54
  55         r = readl(chan->ioaddr + chan->reg);
  56         if(val)
  57                 r |= SAVAGE4_I2C_SCL_OUT;
  58         else
  59                 r &= ~SAVAGE4_I2C_SCL_OUT;
  60         writel(r, chan->ioaddr + chan->reg);
  61         readl(chan->ioaddr + chan->reg);        /* flush posted write */
  62 }
  63
  64 static void savage4_gpio_setsda(void *data, int val)
  65 {
  66         struct savagefb_i2c_chan *chan = data;
  67
  68         unsigned int r;
  69         r = readl(chan->ioaddr + chan->reg);
  70         if(val)
  71                 r |= SAVAGE4_I2C_SDA_OUT;
  72         else
  73                 r &= ~SAVAGE4_I2C_SDA_OUT;
  74         writel(r, chan->ioaddr + chan->reg);
  75         readl(chan->ioaddr + chan->reg);        /* flush posted write */
  76 }
  77
  78 static int savage4_gpio_getscl(void *data)
  79 {
  80         struct savagefb_i2c_chan *chan = data;
  81
  82         return (0 != (readl(chan->ioaddr + chan->reg) & SAVAGE4_I2C_SCL_IN));
  83 }
  84
  85 static int savage4_gpio_getsda(void *data)
  86 {
  87         struct savagefb_i2c_chan *chan = data;
  88
  89         return (0 != (readl(chan->ioaddr + chan->reg) & SAVAGE4_I2C_SDA_IN));
  90 }
  91
  92 static void prosavage_gpio_setscl(void* data, int val)
  93 {
  94         struct savagefb_i2c_chan *chan = data;
  95         u32                       r;
  96
  97         SET_CR_IX(chan->ioaddr, chan->reg);
  98         r = GET_CR_DATA(chan->ioaddr);
  99         r |= PROSAVAGE_I2C_ENAB;
 100         if (val) {
 101                 r |= PROSAVAGE_I2C_SCL_OUT;
 102         } else {
 103                 r &= ~PROSAVAGE_I2C_SCL_OUT;
 104         }
 105         SET_CR_DATA(chan->ioaddr, r);
 106 }
 107
 108 static void prosavage_gpio_setsda(void* data, int val)
 109 {
 110         struct savagefb_i2c_chan *chan = data;
 111         unsigned int r;
 112
 113         SET_CR_IX(chan->ioaddr, chan->reg);
 114         r = GET_CR_DATA(chan->ioaddr);
 115         r |= PROSAVAGE_I2C_ENAB;
 116         if (val) {
 117                 r |= PROSAVAGE_I2C_SDA_OUT;
 118         } else {
 119                 r &= ~PROSAVAGE_I2C_SDA_OUT;
 120         }
 121         SET_CR_DATA(chan->ioaddr, r);
 122 }
 123
 124 static int prosavage_gpio_getscl(void* data)
 125 {
 126         struct savagefb_i2c_chan *chan = data;
 127
 128         SET_CR_IX(chan->ioaddr, chan->reg);
 129         return (0 != (GET_CR_DATA(chan->ioaddr) & PROSAVAGE_I2C_SCL_IN));
 130 }
 131
 132 static int prosavage_gpio_getsda(void* data)
 133 {
 134         struct savagefb_i2c_chan *chan = data;
 135
 136         SET_CR_IX(chan->ioaddr, chan->reg);
 137         return (0 != (GET_CR_DATA(chan->ioaddr) & PROSAVAGE_I2C_SDA_IN));
 138 }
 139
 140 static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan,
 141                                 const char *name)
 142 {
 143         int rc = 0;
 144
 145         if (chan->par) {
 146                 strcpy(chan->adapter.name, name);
 147                 chan->adapter.owner             = THIS_MODULE;
 148                 chan->adapter.id                = I2C_HW_B_SAVAGE;
 149                 chan->adapter.algo_data         = &chan->algo;
 150                 chan->adapter.dev.parent        = &chan->par->pcidev->dev;
 151                 chan->algo.udelay               = 40;
 152                 chan->algo.mdelay               = 5;
 153                 chan->algo.timeout              = 20;
 154                 chan->algo.data                 = chan;
 155
 156                 i2c_set_adapdata(&chan->adapter, chan);
 157
 158                 /* Raise SCL and SDA */
 159                 chan->algo.setsda(chan, 1);
 160                 chan->algo.setscl(chan, 1);
 161                 udelay(20);
 162
 163                 rc = i2c_bit_add_bus(&chan->adapter);
 164
 165                 if (rc == 0)
 166                         dev_dbg(&chan->par->pcidev->dev,
 167                                 "I2C bus %s registered.\n", name);
 168                 else
 169                         dev_warn(&chan->par->pcidev->dev,
 170                                  "Failed to register I2C bus %s.\n", name);
 171         } else
 172                 chan->par = NULL;
 173
 174         return rc;
 175 }
 176
 177 void savagefb_create_i2c_busses(struct fb_info *info)
 178 {
 179         struct savagefb_par *par = info->par;
 180         par->chan.par   = par;
 181
 182         switch(info->fix.accel) {
 183         case FB_ACCEL_PROSAVAGE_DDRK:
 184         case FB_ACCEL_PROSAVAGE_PM:
 185                 par->chan.reg         = CR_SERIAL2;
 186                 par->chan.ioaddr      = par->mmio.vbase;
 187                 par->chan.algo.setsda = prosavage_gpio_setsda;
 188                 par->chan.algo.setscl = prosavage_gpio_setscl;
 189                 par->chan.algo.getsda = prosavage_gpio_getsda;
 190                 par->chan.algo.getscl = prosavage_gpio_getscl;
 191                 break;
 192         case FB_ACCEL_SAVAGE4:
 193         case FB_ACCEL_SAVAGE2000:
 194                 par->chan.reg         = 0xff20;
 195                 par->chan.ioaddr      = par->mmio.vbase;
 196                 par->chan.algo.setsda = savage4_gpio_setsda;
 197                 par->chan.algo.setscl = savage4_gpio_setscl;
 198                 par->chan.algo.getsda = savage4_gpio_getsda;
 199                 par->chan.algo.getscl = savage4_gpio_getscl;
 200                 break;
 201         default:
 202                 par->chan.par = NULL;
 203         }
 204
 205         savage_setup_i2c_bus(&par->chan, "SAVAGE DDC2");
 206 }
 207
 208 void savagefb_delete_i2c_busses(struct fb_info *info)
 209 {
 210         struct savagefb_par *par = info->par;
 211
 212         if (par->chan.par)
 213                 i2c_bit_del_bus(&par->chan.adapter);
 214
 215         par->chan.par = NULL;
 216 }
 217
 218 static u8 *savage_do_probe_i2c_edid(struct savagefb_i2c_chan *chan)
 219 {
 220         u8 start = 0x0;
 221         struct i2c_msg msgs[] = {
 222                 {
 223                         .addr   = SAVAGE_DDC,
 224                         .len    = 1,
 225                         .buf    = &start,
 226                 }, {
 227                         .addr   = SAVAGE_DDC,
 228                         .flags  = I2C_M_RD,
 229                         .len    = EDID_LENGTH,
 230                 },
 231         };
 232         u8 *buf = NULL;
 233
 234         if (chan->par) {
 235                 buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
 236
 237                 if (buf) {
 238                         msgs[1].buf = buf;
 239
 240                         if (i2c_transfer(&chan->adapter, msgs, 2) != 2) {
 241                                 dev_dbg(&chan->par->pcidev->dev,
 242                                         "Unable to read EDID block.\n");
 243                                 kfree(buf);
 244                                 buf = NULL;
 245                         }
 246                 }
 247         }
 248
 249         return buf;
 250 }
 251
 252 int savagefb_probe_i2c_connector(struct fb_info *info, u8 **out_edid)
 253 {
 254         struct savagefb_par *par = info->par;
 255         u8 *edid = NULL;
 256         int i;
 257
 258         for (i = 0; i < 3; i++) {
 259                 /* Do the real work */
 260                 edid = savage_do_probe_i2c_edid(&par->chan);
 261                 if (edid)
 262                         break;
 263         }
 264
 265         if (!edid) {
 266                 /* try to get from firmware */
 267                 const u8 *e = fb_firmware_edid(info->device);
 268
 269                 if (e) {
 270                         edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
 271                         if (edid)
 272                                 memcpy(edid, e, EDID_LENGTH);
 273                 }
 274         }
 275
 276         *out_edid = edid;
 277
 278         return (edid) ? 0 : 1;
 279 }
 280
 281 MODULE_LICENSE("GPL");