2 menu "Macintosh device drivers"
6 bool "Apple Desktop Bus (ADB) support"
7 depends on MAC || (PPC_PMAC && PPC32)
9 Apple Desktop Bus (ADB) support is for support of devices which
10 are connected to an ADB port. ADB devices tend to have 4 pins.
11 If you have an Apple Macintosh prior to the iMac, an iBook or
12 PowerBook, or a "Blue and White G3", you probably want to say Y
13 here. Otherwise say N.
16 bool "Include Mac II ADB driver"
19 Say Y here if want your kernel to support Macintosh systems that use
20 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci,
21 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
25 bool "Include Mac IIsi ADB driver"
28 Say Y here if want your kernel to support Macintosh systems that use
29 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic
30 II, LC, LC II, LC III, Performa 460, and the Performa 600.
33 bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
36 The I/O Processor (IOP) is an Apple custom IC designed to provide
37 intelligent support for I/O controllers. It is described at
38 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
39 support for it, say 'Y' here.
42 bool "Include PMU (Powerbook) ADB driver"
45 Say Y here if want your kernel to support the m68k based Powerbooks.
46 This includes the PowerBook 140, PowerBook 145, PowerBook 150,
47 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
48 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
49 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
50 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
52 # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
54 bool "Support for CUDA based Macs and PowerMacs"
55 depends on (ADB || PPC_PMAC) && !PPC_PMAC64
57 This provides support for CUDA based Macintosh and Power Macintosh
58 systems. This includes many m68k based Macs (Color Classic, Mac TV,
59 Performa 475, Performa 520, Performa 550, Performa 575,
60 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
61 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
62 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later
63 models should use CONFIG_ADB_PMU instead. It is safe to say Y here
64 even if your machine doesn't have a CUDA.
69 bool "Support for PMU based PowerMacs"
72 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
73 PMU is an embedded microprocessor whose primary function is to
74 control system power, and battery charging on the portable models.
75 The PMU also controls the ADB (Apple Desktop Bus) which connects to
76 the keyboard and mouse on some machines, as well as the non-volatile
77 RAM and the RTC (real time clock) chip. Say Y to enable support for
78 this device; you should do so if your machine is one of those
82 bool "Support for the Power/iBook front LED"
87 Support the front LED on Power/iBooks as a generic LED that can
88 be triggered by any of the supported triggers. To get the
89 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
90 and the ide-disk LED trigger and configure appropriately through
94 bool "Support for SMU based PowerMacs"
97 This option adds support for the newer G5 iMacs and PowerMacs based
98 on the "SMU" system control chip which replaces the old PMU.
99 If you don't know, say Y.
102 tristate "APM emulation"
103 depends on PPC_PMAC && PPC32 && PM
106 bool "Support PowerBook hotswap media bay"
107 depends on PPC_PMAC && PPC32
109 This option adds support for older PowerBook's hotswap media bay
110 that can contains batteries, floppy drives, or IDE devices. PCI
111 devices are not fully supported in the bay as I never had one to
114 config PMAC_BACKLIGHT
115 bool "Backlight control for LCD screens"
116 depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
119 Say Y here to enable Macintosh specific extensions of the generic
120 backlight code. With this enabled, the brightness keys on older
121 PowerBooks will be enabled so you can change the screen brightness.
122 Newer models should use an userspace daemon like pbbuttonsd.
124 config PMAC_BACKLIGHT_LEGACY
125 bool "Provide legacy ioctl's on /dev/pmu for the backlight"
126 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64)
128 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for
129 programs which use this old interface. New and updated programs
130 should use the backlight classes in sysfs.
133 bool "Include MacIO (CHRP) ADB driver"
134 depends on ADB && PPC_CHRP && !PPC_PMAC64
136 Say Y here to include direct support for the ADB controller in the
137 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra
138 also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
139 OpenPIC controller and two RS422/Geoports.)
142 bool "Support for ADB input devices (keyboard, mice, ...)"
143 depends on ADB && INPUT=y
145 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
146 such as keyboards, mice, joysticks, trackpads or graphic tablets
147 handled by the input layer. If you say Y here, make sure to say Y to
148 the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
149 "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
150 support" (CONFIG_INPUT_EVDEV) as well.
154 config MAC_EMUMOUSEBTN
155 bool "Support for mouse button 2+3 emulation"
156 depends on INPUT_ADBHID
158 This provides generic support for emulating the 2nd and 3rd mouse
159 button with keypresses. If you say Y here, the emulation is still
160 disabled by default. The emulation is controlled by these sysctl
162 /proc/sys/dev/mac_hid/mouse_button_emulation
163 /proc/sys/dev/mac_hid/mouse_button2_keycode
164 /proc/sys/dev/mac_hid/mouse_button3_keycode
166 If you have an Apple machine with a 1-button mouse, say Y here.
168 config THERM_WINDTUNNEL
169 tristate "Support for thermal management on Windtunnel G4s"
170 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
172 This driver provides some thermostat and fan control for the desktop
176 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
177 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
179 This driver provides some thermostat and fan control for the
180 iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
181 better fan behaviour by default, and some manual control.
184 tristate "Support for thermal management on PowerMac G5"
185 depends on I2C && I2C_POWERMAC && PPC_PMAC64
187 This driver provides thermostat and fan control for the desktop
191 tristate "New PowerMac thermal control infrastructure"
195 tristate "Support for thermal management on iMac G5"
196 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
199 This driver provides thermal control for the iMacG5
202 tristate "Support for thermal management on PowerMac9,1"
203 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
206 This driver provides thermal control for the PowerMac9,1
207 which is the recent (SMU based) single CPU desktop G5
209 config WINDFARM_PM112
210 tristate "Support for thermal management on PowerMac11,2"
211 depends on WINDFARM && I2C && PMAC_SMU
214 This driver provides thermal control for the PowerMac11,2
215 which are the recent dual and quad G5 machines using the
216 970MP dual-core processor.
219 tristate "Support for ANS LCD display"
220 depends on ADB_CUDA && PPC_PMAC